Type Approval of Agricultural or Forestry Tractors

Suppliment tal-Gazzetta tal-Gvern ta’ Malta, Nru. 19,341, 7 ta’ Novembru, 2014

L.N. 398 of 2014

PRODUCT SAFETY ACT

(CAP. 427)

Type Approval of Agricultural or Forestry Tractors

(Amendment) Regulations, 2014

IN exercise of the powers conferred by articles 38, 39 and 40 of

the Product Safety Act, the Minister for Social Dialogue, Consumer

Affairs and Civil Liberties, on the advice of the Malta Competition

and Consumer Affairs Authority, has made the following

regulations:-

(1) The title of these regulations is the Type Approval of Citation, scope

Agricultural or Forestry Tractors (Amendment) Regulations, 2014 and

commencement

and these regulations shall be read and construed as one with the Type .

Approval Agricultural or Forestry Tractors Regulations, hereinafter S.L. 427.59

referred to as "the principal regulations".

(2) These regulations implement the following requirements

(a)

Directive 2014/43/EU of 18 March 2014 amending

Annexes I, II and III to Directive 2000/25/EC of the European

Parliament and of the Council on action to be taken against the

emission of gaseous and particulate pollutants by engines

intended to power agricultural or forestry tractors; and

(b) Directive 2014/44/EU of 18 March 2014 amending

Annexes I, II and III to Directive 2003/37/EC of the European

Parliament and of the Council on type-approval of agricultural

or forestry tractors, their trailers and interchangeable towed

machinery, together with their systems, components and

separate technical units.

(3) The provisions relating to the implementation of Directive

2014/43/EU and Directive 2014/44/EU shall come into force on the

1st January 2015.

Model A of Schedule I to the principal regulations shall be Amends

Schedule I to

amended as follows

the principal

regulations.

(a)

item 3.2.2 thereof shall be substituted by the

following

"3.2.2.

Measures taken against air pollution

2.2.1.

Device

for

recycling

crankcase

gases: yes/no( 1 )

3.2.2.2.

Additional anti-pollution devices (if

any, and if not covered by another

heading)

3.2.2.2.1.

Catalytic converter: yes/no( 1 )

3.2.2.2.1.1.

Make(s): .........................................

3.2.2.2.1.2.

Type(s): ...........................................

3.2.2.2.1.3.

Number of catalytic converters and

elements ..........................................

3.2.2.2.1.4.

Dimensions- and volume of the

catalytic converter(s): .....................

3.2.2.2.1.5.

Type of catalytic action: ..................

3.2.2.2.1.6.

Total charge of precious metals: ......

3.2.2.2.1.7.

Relative concentration: ....................

3.2.2.2.1.8.

Substrate (structure and material): ...

3.2.2.2.1.9.

Cell density: ....................................

3.2.2.2.1.10. Type of casing for the catalytic

converter(s): ....................................

3.2.2.2.1.11. Location

of

the

catalytic

converter(s)

(place(s)

and

maximum/minimum

distance(s)

from engine): ...................................

3.2.2.2.1.12. Normal operating range (K): ...........

3.2.2.2.1.13. Consumable

reagent

(where

appropriate): ....................................

3.2.2.2.1.13.1. Type and concentration of reagent

needed for catalytic action: ..............

3.2.2.2.1.13.2.Normal operational temperature

range of reagent: ..............................

3.2.2.2.1.13.3. International

standard

(where

appropriate): ....................................

3.2.2.2.1.14. NOx sensor: yes/no ( 1 )

3.2.2.2.2.

Oxygen sensor: yes/no ( 1 )

3.2.2.2.2.1.

Make(s): .........................................

3.2.2.2.2.2.

Type: ...............................................

3.2.2.2.2.3.

Location: .........................................

3.2.2.2.3.

Air injection: yes/no ( 1 )

3.2.2.2.3.1.

Type (pulse air, air pump, etc.): .......

3.2.2.2.4.

EGR: yes/no( 1 )

3.2.2.2.4.1.

Characteristics

(cooled/uncooled,

high pressure/low pressure, etc.)

3.2.2.2.5.

Particulate trap: yes/no( 1 )

3.2.2.2.5.1.

Dimensions and capacity of the

particulate trap: ...............................

3.2.2.2.5.2.

Type and design of the particulate

trap

3.2.2.2.5.3.

Location (place(s) and maximum/

minimum distance(s) from engine)

3.2.2.2.5.4.

Method or system of regeneration,

description and/or drawing: .............

3.2.2.2.5.5.

Normal operating temperature (K)

and pressure (kPa) range: .................

3.2.2.2.6.

Other systems: yes/no ( 1 )

3.2.2.2.6.1.

Description and operation: ............";

(b) item 3.2.4 thereof shall be substituted by the

following

"3.2.4.

Valve timing

3.2.4.1.

Maximum lift and angles of opening

and closing in relation to dead

centres or equivalent data: ...............

3.2.4.2.

Reference and/or setting ranges ( 1 )

3.2.4.3.

Variable valve timing system (if

applicable and where intake and/or

exhaust)

3.2.4.3.1.

Type: continuous or on/off ( 1 )

3.2.4.3.2.

Cam phase shift angle ..................";

(c)

the table in item 3.3.1.2 thereof shall be substituted

by the following

Parent

Engines within

engine (*)

family (**)

Engine type

No of cylinders

Rated speed (min -1 )

Fuel delivery per stroke (mm 3 ) for diesel

engines, fuel flow (g/h) for petrol

engines, at rated net power

Rated net power (kW)

Maximum power speed (min -1 )

Maximum net power (kW)

Maximum torque speed (min -1 )

Fuel delivery per stroke (mm 3 ) for diesel

engines, fuel flow (g/h) for petrol

engines, at maximum torque

Maximum torque (Nm)

Low idle speed (min -1 )

Cylinder displacement (in % of parent en-

gine)

(*) For full details see item 3.2

(**) For full details see item 3.4.

; and

(d) item 3.4.2 thereof shall be substituted by the

following

"3.4.2.

Measures taken against air pollution

3.4.2.1.

Device for recycling crankcase gases

yes/no ( 1 ) ..........................................

3.4.2.2.

Additional anti-pollution devices (if

any, and if not covered by another

heading)

3.4.2.2.1.

Catalytic converter: yes/no ( 1 )

3.4.2.2.1.1. Make(s): ...........................................

3.4.2.2.1.2. Type(s): .............................................

3.4.2.2.1.3. Number of catalytic converters and

elements ............................................

3.4.2.2.1.4. Dimensions- and volume of the

catalytic converter(s): ........................

3.4.2.2.1.5. Type of catalytic action: ...................

3.4.2.2.1.6. Total charge of precious metals: ........

3.4.2.2.1.7. Relative concentration: .....................

3.4.2.2.1.8. Substrate (structure and material): ....

3.4.2.2.1.9. Cell density: .....................................

3.4.2.2.1.10. Type of casing for the catalytic

converter(s): .....................................

3.4.2.2.1.11. Location of the catalytic converter(s)

(place(s) and maximum/minimum

distance(s) from engine): ...................

3.4.2.2.1.12. Normal operating range (K): ............

3.4.2.2.1.13. Consumable

reagent

(where

appropriate)

3.4.2.2.1.13.1.Type and concentration of reagent

needed for catalytic action: ...............

3.4.2.2.1.13.2.Normal operational temperature

range of reagent:.................................

3.4.2.2.1.13.3.International

standard

(where

appropriate): ......................................

3.4.2.2.1.14. NOx sensor: yes/no ( 1 )

3.4.2.2.2.

Oxygen sensor: yes/no ( 1 )

3.4.2.2.2.1. Make(s): ...........................................

3.4.2.2.2.2. Type: .................................................

3.4.2.2.2.3. Location: ...........................................

3.4.2.2.3.

Air injection: yes/no ( 1 )

3.4.2.2.3.1. Type (pulse air, air pump, etc.): .........

3.4.2.2.4.

EGR: yes/no ( 1 )

3.4.2.2.4.1. Characteristics

(cooled/uncooled,

high pressure/low pressure, etc.): .....

3.4.2.2.5.

Particulate trap: yes/no ( 1 )

3.4.2.2.5.1. Dimensions and capacity of the

particulate trap: .................................

3.4.2.2.5.2. Type and design of the particulate

trap: ..................................................

3.4.2.2.5.3. Location (place(s) and maximum/

minimum distance(s) from engine):....

3.4.2.2.5.4. Method or system of regeneration,

description and/or drawing: .......

3.4.2.2.5.5. Normal operating temperature (K)

and pressure (kPa) range: ..................

3.4.2.2.6.

Other systems: yes/no ( 1 )

3.4.2.2.6.1. Description and operation: ............ ";

(e)

item 3.4.5 thereof shall be substituted by the

"3.4.5.

Valve timing

3.4.5.1.

Maximum lift and angles of opening

and closing in relation to dead centres

or equivalent data: ................................

3.4.5.2.

Reference and/or setting ranges ( 1 )

3.4.5.3.

Variable valve timing system (if

applicable and where intake and/or

exhaust)

3.4.5.3.1. Type: continuous or on/off ( 1 )

3.4.5.3.2. Cam phase shift angle ........................";

(f) immediately after item 3.4.7 there shall be added the

"3.5

Engine power

3.5.1

Maximum

net

engine

power

................... kW, at .................... min–1

(in accordance with Directive 97/68/EC

of the European Parliament and of the

Council (*))

3.5.2

Rated net engine power: .......................

kW, at ........................ min–1 (in

accordance with Directive 97/68/EC)

3.5.3

Optional: Power at the power take-off

(PTO), if any, at the rated speed(s) (in

accordance with OECD Code 2 or ISO

789-1:1990)

Standard PTO

Corresponding engine

Power (kW)

speed (min–1)

speed (min–1)

2-1 000

3-540 ECO

4-1 000 ECO

".

3. Item 2 of Chapter C, Part II, Section 2 of Schedule II to the Amends

Schedule II to

principal regulations shall be amended as follows

the principal

regulations.

Results of the exhaust emission tests

Number of base Directive and most recent

amendment applicable for EC type-approval. For a

Directive with two or more application phases,

indicate which phase: ................................Variant/

version: ...................................................................

a.

NRSC/ESC/WHSC ( 1 ) final test results inclusive of

DF (g/kWh)

Variant/version

Variant/version

Variant/version

CO

....... g/kWh

....... g/kWh

....... g/kWh

HC

....... g/kWh

....... g/kWh

....... g/kWh

NOx

....... g/kWh

....... g/kWh

....... g/kWh

HC+NOx

....... g/kWh

....... g/kWh

....... g/kWh

PM

....... g/kWh

....... g/kWh

....... g/kWh

CO2

....... g/kWh

....... g/kWh

....... g/kWh

b. NRTC/ETC/WHTC ( 1 ) final test results inclusive of DF (g/

kWh) (*)

Variant/version

Variant/version

Variant/version

CO

....... g/kWh

....... g/kWh

....... g/kWh

HC

....... g/kWh

....... g/kWh

....... g/kWh

NOx

....... g/kWh

....... g/kWh

....... g/kWh

NMHC

....... g/kWh

....... g/kWh

....... g/kWh

CH4

....... g/kWh

....... g/kWh

....... g/kWh

PM

....... g/kWh

....... g/kWh

....... g/kWh

NRTC hot cycle CO2

....... g/kWh

....... g/kWh

....... g/kWh

NRTC hot cycle work

....... kWh

....... kWh

....... kWh

( 1 ) Delete where not applicable.

(*) Where applicable. ".

Part I, A of Schedule III to the principal regulations shall

be amended as follows

(a)

item 3.6 thereof shall be substituted by the

following

"3.6.

Maximum

net

engine

power

................... kW, at .................... min–1

(in accordance with Directive 97/68/

EC) ( 1 )

3.6.1.

Rated net engine power: ....................

kW, at ................... min–1 (in

accordance with Directive 97/68/EC)

3.6.2.

Optional: Power at the power take-off

(PTO), if any, at the rated speed(s) (in

accordance with OECD Code 2 or ISO

789-1:1990)

( 1 ) State the test method used; ".

(b) items 15.1 and 15.2 thereof shall be substituted by

the following

"15.1. NRSC/ESC/WHSC ( 1 ) final test results

inclusive of DF

CO: .............................. (g/kWh) HC

.................................... (g/kWh) NOX

................... (g/kWh)

HC+NOX: .................................. (g/

kWh) Particulates: ............................

(g/kWh) CO2: .................... (g/kWh)

2

NRTC/ETC/WHTC ( 1 ) final test results

inclusive of DF (g/kWh) (*)

CO: .................................. (g/kWh)

HC: ........................... (g/kWh) NOX

.................... (g/kWh)

HC+NOX: .......................... (g/kWh)

Particulates: ...................... (g/kWh)

hot cycle CO2: ........................ (g/

kWh) Cycle work for hot start w/o

regeneration (kWh)

(1) Delete where not applicable.

(*) Where applicable. ".

5. Schedule VIII to the principal regulations shall be Substitutes

Schedule VIII

substituted by the following

to the principal

regulations.

"Schedule VIII

LIST OF SEPARATE DIRECTIVES, AND THEIR DATE OF

ADOPTION.

Amending Official Journal

Base

Date of

Title of Base Directive

Directive

Directive no.

reference

Adoption

No.

2009/63/EC

Directive 2009/63/EC of R e p e a l i n g L 214, p.23

1 January

the European Parliament 74/151/EEC 19.08.2009

and of the Council of 13

July 2009 on certain parts

and characteristics of

w h e el ed a gr i cu lt u ra l o r

forestry tractors. (Codified

version)

2009/60/EC

Directive 2009/60/EC of R e p e a l i n g L 198, p.15

1 January

the European Parliament D i r e c t i v e 30.7.2009

and of the Council of 13 74/152/EEC

July 2009 on the

maximum design speed of

an d load platforms for

w h e el ed a gr i cu lt u ra l o r

forestry tractors. (Codified

version)

2010/62/EU L 238, 9.9.2010,

29 September

p. 7–13

1 st January

2009/59/EC

Directive 2009/59/EC of R e p e a l i n g L 198, p.9

the European Parliament D i r e c t i v e 30.7.2009

and of the Council of 13 74/346/EEC

J u l y 2 0 0 9 o n re a r- v i e w

mirrors for wheeled

a g r i c u l t u r a l o r fo r e s t r y

tractors.

(Codified

version)

2009/66/EC

Directive 2009/66/EC of R e p e a l i n g L 201, p.11

1 January

the European Parliament 75/321/EEC 1.08.2009

and of the Council of 13

July 2009 on the steering

equipment of wheeled

a g r i c u l t u r a l o r fo r e s t r y

tractors

(Codified

version).

2009/64/EC

Directive 2009/64/EC of R e p e a l i n g L 216, p.1

1 January

the European Parliament 75/322/EEC 20.08.2009

and of the Council of 13

July 2009 on the

suppression of radio

interference produced by

a g r i c u l t u r a l o r fo r e s t r y

tractors (electromagnetic

compatibility) (Codified

version).

76/432/EEC

Council Directive of April

L 122,

The effective

6,

on

the

08.05.1976

date

approximation of the laws 82/890/EEC L 378,

The effective

of the member states

12.1982

date

relating to the braking

d e v i c e s o f w h e e l e d 96/63/EC

L 253,

The effective

30.09.1996

date

agricultural or forestry

tractors

97/54/EC

L 277,

The effective

10.10.1997

date

71/320/EEC

Council Directive of July

L 202,

With respect

26,

on

the

06.09.1971

to these

approximation of the laws

regulations -

of the member states

The effective

relating to the braking

date

d e v i c e s o f c e r t a i n 74/132/EEC L 74/78,

With respect

categories of motor

19.03.1974

to these

vehicles and of their

regulations -

trailers

The effective

date

75/524/EEC L 263/3-4,

With respect

08.09.1975

to these

regulations -

The effective

date

79/489/EEC L 128/12-13,

With respect

26.05.1979

to these

regulations -

The effective

date

85/647/EEC L 380/1-2,

With respect

31.12.1985

to these

regulations -

The effective

date

88/194/EEC L 92/47-49,

With respect

04.04.1988

to these

regulations -

The effective

date

91/422/EEC L 233/21-

With respect

29,22.08.1991

to these

regulations -

The effective

date

98/12/EC

L 81,

With respect

18.03.1998

to these

regulations -

The effective

date

2002/78/EC L 267,

With respect

04.10.2002

to these

regulations -

The effective

date

76/763/EEC

Council Directive of July

L 262,

The effective

27,

on

the

27.09.1976

date

approximation of the laws 82/890/EEC L 378,

The effective

of the member states

31.12.1982

date

relating to passenger seats

97/54/EEC

L 277,

The effective

for wheeled agricultural or

10.10.1997

date

forestry tractors

1999/86/EC L 297,

The effective

18.11.1999

date

2010/52/EU L 213,

2 March 2011

13.8.2010, p.

37–42

2009/76/EC

Directive 2009/76/EC of R e p e a l i n g L201, p.18

1 January

the European Parliament 77/311/EEC 1.08.2009

and of the Council of 13

July 2009 relating to the

d r i v e r- p e r c e i v e d n o i s e

level

of

wheeled

a g r i c u l t u r a l o r fo r e s t r y

tractors

(Codified

version).

2009/57/EC

Directive 2009/57/EC of R e p e a l i n g L 261, p.1

1 January

the European Parliament 77/536/EEC 3.10.2009

and of the Council of 13

July 2009 relating to the

roll-over protection

structures of wheeled

a g r i c u l t u r a l o r fo r e s t r y

tractors (Codified version)

78/764/EEC

Council Directive of July

L 255,

The effective

25,

on

the

18.09.1978

date

approximation of the laws 82/890/EEC L 378

The effective

of the member states

31.12.1982

date

relating to the driver’s seat

83/190/EEC

The effective

on wheeled agricultural or

26.04.1983

date

forestry tractors

88/465/EEC L 228

The effective

17.08.1988

date

97/54/EC

The effective

10.10.1997

date

1999/57/EC L 148

The effective

15.06.1999

date

2006/96/EC L363, P.81

20.11.2006

20.12.2006

2009/61/EC

Directive 2009/61/EC of R e p e a l i n g L 203 p.19

1 January

the European Parliament 78/933/EEC 5.08.2009

and of the Council of 13

July 2009 relating to the

installation of lighting and

light-signalling devices on

wheeled agricultural and

forestry tractors. (Codified

version)

2009/68/EC

Directive 2009/68/EC of R e p e a l i n g L 203, p.52

1 January

the European Parliament 79/532/EEC 5.08.2009

and of the Council of 13

July 2009 on the

component type-approval

of lighting and light-

signalling devices on

w he el ed a gr i cu lt u ra l or

forestry tractors. (Codified

version)

2009/58/EC

Directive 2009/58/EC of R e p e a l i n g L 198 p.4

1 January

1 3 J u l y 2 0 0 9 o n t h e 79/533/EEC 30.7.2009

coupling device and the

reverse of wheeled

agricultural or forestry

tractors (Codified version)

2009/75/EC

Directive 2009/75/EC of R e p e a l i n g L 261, p.40

1 January

the European Parliament D i r e c t i v e 3.10.2009

and of the Council of 13 79/622/EEC

July 2009 on roll-over

protection stru ctures of

w he el ed a gr i cu lt u ra l or

fo r e s t r y t r a c t o r s (s tatic

testing) (Codified version)

80/720/EEC

Council Directive of June

The effective

25,

on

the

28.07.1980

date

approximation of the laws 82/890/EEC L 378

The effective

of the member states

31.12.1982

date

relating to the operating

s p a c e , a c c e s s t o t h e 88/414/EEC L 200

The effective

26.07.1988

date

driving position and the

d o o r s a n d w i n d o w s o f 97/54/EC

The effective

w he el ed a gr i cu lt u ra l or

10.10.1997

date

forestry tractors

2010/22/EU L 91, 10.4.2010,

1 May 2011

p. 1–68

2010/62/EU L 238, 9.9.2010,

29 September

p. 7–13

86/297/EEC

Council Directive of June

The effective

25,

on

the

08.07.1986

date

approximation of the laws 97/54/EC

The effective

of the member states

10.10.1997

date

relating to the power take-

w h e e l e d 2010/62/EU L 238, 9.9.2010,

29 September

offs

of

p. 7–13

agricultural or forestry

tractors

2012/24/EU L 274,

1 November

9.10.2012, p. 24

- 25

86/298/EEC

Council Directive of May

The effective

25, 1986 on rear mounted

08.07.1986

date

r o l l - o v e r p r o t e c t i o n 89/682/EEC L 398

The effective

structures of narrow-track

12.12.1989

date

w h e el ed a gr i cu lt u ra l o r

2000/19/EC

The effective

forestry tractors

date

13.04.2000

From 1 st

2005/67/EC L 273

19.10.2005

January 2006

2006/96/EC L363, P.81

20.11.2006

20.12.2006

2010/22/EU L 91, 10.4.2010,

1 May 2011

p. 1–68

86/415/EEC

Council Directive of July

The effective

24,

on

the

24.07.1986

date

i n s t a l l a t i o n , l o c a t i o n , 97/54/EC

The effective

operation

and

24.07.1986

date

identification of the

controls of wheeled

a g r i c u l t u r a l o r fo r e s t r y 2 0 1 0 / 2 2 / /

L 91, 10.4.2010, 1 May 2011

tractors

EU

p. 1–68

87/402/EEC

Council Directive of July

24, 1986 on roll-over

08.08.1987

p r o t e c t i o n s t r u c t u r e s 89/681/EEC L 398

The effective

mounted in fr ont of t he

12.12.1989

date

d r i ve rs s e a t o n b a r r ow -

track wheeled agricultural 2000/22/EC L 107

The effective

04.05.2000

date

or forestry tractors

From 1 st

2005/67/EC L 273

19.10.2005

January 2006

2006/96/EC L363, P.81

20.11.2006

20.12.2006

2010/22/EU L 91, 10.4.2010,

1 May 2011

p. 1–68

89/173/EEC

Council Directive of July

L 67 10.05.1989 The effective

25,

on

the

date

approximation of the laws 97/54/EEC

The effective

of the member states

10.10.1997

date

relating to certain

a n d 2000/1/EC

L 21 26.01.2000 The effective

components

date

characteristics of wheeled

a g r i c u l t u r a l o r fo r e s t r y 2006/26/EC

31 st

L 65;

tractors

07.03.2006

December,

2006/96/EC L363, P.81

20.11.2006

20.12.2006

92/22/EC

Council Directive of

With respect

March 31, 1992 on safety

14.05.1992

to these

glazing and glazing

regulations -

materials on motor

The effective

vehicles and their trailers

date

2001/92/EC L 291

With respect

08.11.2001

to these

regulations -

The effective

date

2000/25/EC

Council Directive of May

The effective

22, 2000 on action to be

12.07.2000

date – with the

taken against the emission

following

of gaseous and particulate

addition

pollutants by engines

Following

intended to power

Article 4

agricultural or forestry

paragraph 5of

tractors.

directive

2000/25/EC as

amended by

2005/13/EC

the dates of

Article 4

paragraph 3

shall be

postponed by

2 years. The

conditions in

the Article 4

paragraph 5

still apply.

2005/13/EC L 55 01.03.2005 From 1 st

January 2006

– see above

2006/96/EC L363, P.81

20.11.2006

20.12.2006

2010/22/EU L 91, 10.4.2010, 30 th April

p. 1–68

L 246,

24 September

2011/72/EU

23.9.2011, p 1-4 2011

2011/87/EU L301 ,

9 December

18.11.2011, p 1- 2012

2014/43/EU L 82,

1 January

20.03.2014, p12- 2015

77/537/EEC

Council Directive of 28

The effective

June 1977 on the

date

29.08.1977

approximation of the laws

o f t h e M e m b e r S t a t e s 82/890/EEC

The effective

date

relating to the measures to

31.12.1982

be taken against the

e m i s s i o n o f p o l l u t a n t s 97/54/EC

The effective

date

from diesel engines for use

10.10.1997

in wheeled agricultural or

forestry tractors.

76/115/EEC

Council Directive of

L 24 30.01.1976 With respect

December 18, 1975 on the

to these

approximation of the laws

regulations -

of the Member States

The effective

relating to anchorage for

date

m o t o r - v e h i c l e s s a f e t y 81/575/EEC L 209

With respect

belts.

20.07.1981

to these

regulations -

The effective

date

82/318/EEC L 139

With respect

19.05.1982

to these

regulations -

The effective

date

90/629/EEC L 314;

With respect

06.12.1990

to these

regulations -

The effective

date

96/38/EC

With respect

26.07.1996

to these

regulations -

The effective

date

77/541/EEC

Council Directive of June

With respect

28,

on

the

29.08.1977

to these

approximation of the laws

regulations -

of the member states

The effective

relating to safety belts and

date

restraints systems of motor 81/576/EEC L 209

With respect

vehicles.

29.07.1981

to these

regulations -

The effective

date

82/319/EEC L 139

With respect

19.05.1982

to these

regulations -

The effective

date

87/354/EEC L 192

With respect

11.07.1987

to these

regulations -

The effective

date

90/628/EEC L 341

With respect

06.12.1990

to these

regulations -

The effective

date

96/36/EC

With respect

17.07.1996

to these

regulations -

The effective

date

2000/3/EC L 53 25.02.2000 With respect

to these

regulations -

The effective

date

75/443/EEC

Council Directive of June

With respect

26,

on

the

26.07.1975

to these

approximation of the laws

regulations -

of the member states

The effective

relating to the reverse and

date

speedometer equipment of 97/39/EC

With respect

motor vehicles

05.07.1997

to these

regulations -

The effective

date

91/226/EEC

Council Directive of

With respect

March 27, 1991 on the

23.04.1991

to these

approximation of the laws

regulations -

of the member states

The effective

relating to the spray-

date

suppression systems of

certain categories of motor

vehicles and their trailers

92/24/EEC

Council Directive of

With respect

March 27, 1991 on the

14.05.1992

to these

approximation of the laws

regulations -

of the member states

The effective

relating to speed limitation

date

devices or similar speed

limitation

on-board

systems of certain

categories of motor

vehicles

89/297/EEC

Council Directive of April

With respect

13,

on

the

05.05.1989

to these

approximation of the laws

regulations -

of the member states

The effective

relating to the lateral

date

protection (side guards) of

certain motor vehicles and

their trailers

2008/2/EC

DIRECTIVE OF THE

L 24,

1st May 2008

EUROPEAN

29.1.2008

Repealing

PARLIAMENT AND OF

Directive 74/

THE COUNCIL of 15

347/EEC with

January 2008

its successive

on the field of vision and

amendments.

windscreen wipers for

(referred to in

w he el ed a gr i cu lt u ra l or

Article 6)

forestry tractors

2009/144/EC Directive 2009/144/EC of

L 27, 30.1.2010,

1 June 2010

the European Parliament

p 33-170

and of the Council of 30 2010/52/EU L 213,

2 March 2011

November 2009 on certain

13.8.2010, p.

components

and

37–42

characteristics of wheeled

a g r i c u l t u r a l o r f o r e s t r y 2010/62/EU L 238, 9.9.2010,

29 September

p. 7–13

tractors (codified version);

2013/8/EU L56, 28.2.2014,

1 April 2014".

p. 8–14

".

€0.81