MT
TRAILERS (AMENDMENT) REGULATIONS, 2011 (amendment)
Table of Provisions (61)
Statutory Text (61 Articles)
Suppliment tal-Gazzetta tal-Gvern ta’ Malta Nru. 18,695, 7 ta’ Jannar, 2011
L.N. 7 of 2011
PRODUCT SAFETY ACT
(CAP. 427)
EC TYPE APPROVAL OF MOTOR VEHICLES AND THEIR
TRAILERS (AMENDMENT) REGULATIONS, 2011
IN exercise of the powers conferred by articles 38 to 40 of
the Product Safety Act, the office of the Prime Minister on the
advice of the Malta Standards Authority, has made the following
regulations:-
1 . T h e t i t l e o f t h e s e r e g u l a t i o n s i s t h e E C Ty p e Citation.
Approval of Motor Vehicles and their Trailers (Amendment)
Regulations, 2011, and they shall be read and construed as
one with the EC Type Approval of Motor Vehicles and their
Trailers Regulations, 2009 hereinafter referred to as “the L.N. 148 of 2009.
principal regulations”.
These regulations implement the requirements set by
(1) Regulation (EC) No. 661/2009 of the European
Parliament and of the Council of 13 July 2009 concerning type-
approval requirements for the general safety of motor vehicles,
their trailers and systems, components and separate technical
units intended therefore. Regulation (EC) No. 661/2009 amends
Schedule IV, VI, XI, XXI, XXII of L.N. 148 of 2009.
(i) Regulation (EC) No.661/2009 Repeals the
following Directives;
70/221/EEC, 70/222/EEC, 70/311/EEC, 70/387/EEC,
70/388/EEC, 71/320/EEC, 72/245/EEC, 74/60/EEC, 74/61/
EEC, 74/297/EEC, 74/408/EEC, 74/483/EEC, 75/443/EEC,
76/114/EEC, 76/115/EEC, 76/756/EEC, 76/757/EEC, 76/758/
EEC, 76/759/EEC, 76/760/EEC, 76/761/EEC, 76/762/EEC,
77/389/EEC, 77/538/EEC, 77/539/EEC, 77/540/EEC, 77/541/
EEC, 77/649/EEC, 78/316/EEC, 78/317/EEC, 78/318/EEC,
78/549/EEC, 78/932/EEC, 89/297/EEC, 91/226/EEC, 92/21/
EC, 92/22/EEC, 92/24/EEC, 92/114/EEC, 94/20/EC, 95/28/
EC, 96/27/EC, 96/79/EC, 97/27/EC, 98/91/EC, 2000/40/EC,
2001/56/EC, 2001/85/EC, 2003/97/EC shall be repealed with
effect from 1 November 2014.
(ii) Directive 92/23/EEC shall be repealed with effect
from 1 November 2017.
(iii) Regulation (EC) No.661/2009 shall apply from 1
November 2011, However;
Article 13(15), Article 14 and points 1(a)(iii), 1(b)(iii)
and (iv), 2(c), 3(a)(iii), 3(b)(iii), 3(e)(iii) and 3(f)(i) of Annex
III shall be deemed to have entered into force on 20 August
2009. Points 1(a)(i), 1(b)(i), 2(a), 3(a)(i), 3(b)(i), 3(c)(i),
3(d)(i), 3(e)(i) and 3(f)(ii) of Annex III shall apply from 1
November 2014.
Points 1(a)(ii), 1(b)(ii), 2(b), 3(a)(ii), 3(b)(ii), 3(c)(ii),
3(d)(ii), 3(e)(ii) and point 4 of Annex III shall apply from 1
November 2017;
(2) Commission Directive 2010/19/EU of 9 March
2010 amending, for the purpose of adaptation to technical progress
in the field of spray-suppression systems of certain categories of
motor vehicles and their trailers, Council Directive 91/226/EEC
and Directive 2007/46/EC of the European Parliament and of the
Council. This Directive amends Schedule IV, XI, XXI, XXII of
L.N. 148 of 2009;
(3) Commission Regulation (EU) No. 371/2010 of
16 April 2010 replacing Annexes V, X, XV, and XVI to Directive
2007/46/EC of the European Parliament and of the Council
establishing a framework for the approval of motor vehicles and
their trailers, and of systems, components an separate technical
units intended for such vehicles. This Regulation amends Schedule
V, X, XV, XVI, XXII of L.N. 148 of 2009. Commission Regulation
(EU) No. 371/2010 shall be deemed to have entered into force on
29 April 2010;
(4) Commission Regulation (EU) No. 406/2010
of 26 April 2010 implementing Regulation (EC) No. 79/2009 of
the European Parliament and of the Council on type-approval
of hydrogen-powered motor vehicles. This Regulation amends
Schedule XXI of L.N. 148 of 2009. Commission Regulation (EU)
No. 406/2010 has be deemed to have entered into force 7 June
2010;
(5) Commission Regulation (EU) No 672/2010 of 27
July 2010 concerning type-approval requirements for windscreen
defrosting systems of certain motor vehicles and implementing
Regulation (EC) No 661/2009 of the European Parliament and of
the Council concerning type-approval requirements for the general
safety of motor vehicles, their trailers and systems, components and
separate technical units intended therefore. This Regulation amends
Schedule XXI of L.N. 148 of 2009. Commission Regulation (EU)
No.672/2010 shall be deemed to have entered into force on 17
August 2010.
For Schedule IV to the principal regulations, there shall
be substituted the following:-
B
“SCHEDULE IV
LIST OF REGULATORY ACTS SETTING THE REQUIREMENTS FOR THE PURPOSE OF EC TYPE-
APPROVAL OF VEHICLES
PART I
List of regulatory acts for EC type-approval of vehicles produced in unlimited series
Applicabi
Regulatory act
lity
Subject
Official Journal reference
reference
Permissible sound level
L 42, 23.2.1970, p. 16
X
X
X
X
X
X
Directive 70/
157/EEC
Directive 70/
Emissions
L 76, 6.4.1970, p. 1
X
X
X
X
X
X
220/EEC
L 171, 29.6.2007, p. 1
X
X
X
X
Emissions (Euro 5 and 6)
Regulation
( 9 )
( 9 )
( 9 )
( 9 )
light-duty vehicles/access
(EC) No
to information
715/2007
X
X
X
X
X
X
Fuel tanks/rear protective
Directive 70/
( 5 )
( 5 )
( 5 )
( 5 )
( 5 )
( 5 )
X
L 76, 6.4.1970, p. 23
devices
221/EEC
Rear registration plate
Directive 70/
L 76, 6.4.1970, p. 25
X
X
X
X
X
X
X
space
222/EEC
Directive 70/
Steering effort
L 133, 18.6.1970, p. 10
X
X
X
X
X
X
X
311/EEC
Directive 70/
Door latches and hinges
L 176, 10.8.1970, p. 5
X
X
X
X
387/EEC
Directive 70/
Audible warning
L 176, 10.8.1970, p. 12
X
X
X
X
X
X
388/EEC
Indirect vision devices
L 25, 29.1.2004, p. 1
X
X
X
X
X
X
Directive
2003/ 97/EC
Directive 71/
Braking
L 202, 6.9.1971, p. 37
X
X
X
X
X
X
X
320/EEC
Radio interference (electro-
Directive 72/
L 152, 6.7.1972, p. 15
X
X
X
X
X
X
X
magnetic compatibility)
245/EEC
Diesel smoke
L 190, 20.8.1972, p. 1
X
X
X
X
X
X
Directive 72/
306/EEC
Directive
Interior fittings
L 38, 11.2.1974, p. 2
X
74/60/ EEC
Directive
Anti-theft and immobiliser
L 38, 11.2.1974, p. 22
X
X
X
X
X
X
74/61/ EEC
Directive 74/
Protective steering
L 165, 20.6.1974, p. 16
X
X
297/EEC
Seat strength
L 221, 12.8.1974, p. 1
X
X
X
X
X
X
Directive 74/
408/EEC
Directive 74/
Exterior projections
L 256, 2.10.1974, p. 4
X
483/EEC
B
Applicabi
Regulatory act
lity
Item
Subject
Official Journal reference
reference
Speedometer and reverse
Directive 75/
L 196, 26.7.1975, p. 1
X
X
X
X
X
X
gear
443/EEC
Directive 76/
Plates (statutory)
L 24, 30.1.1976, p. 1
X
X
X
X
X
X
X
X
X
X
114/EEC
Directive 76/
Seat-belt anchorages
L 24, 30.1.1976, p. 6
X
X
X
X
X
X
115/EEC
Installation of lighting and
Directive 76/
L 262, 27.9.1976, p. 1
X
X
X
X
X
X
X
X
X
X
light signalling devices
756/EEC
Directive 76/
Retro reflectors
L 262, 27.9.1976, p. 32
X
X
X
X
X
X
X
X
X
X
757/EEC
Directive 76/
L 262, 27.9.1976, p. 54
X
X
X
X
X
X
X
X
X
X
End-outline, front-position
758/EEC
(side), rear-position (side),
stop, side marker, daytime
running lamps
Directive 76/
Direction indicators
L 262, 27.9.1976, p. 71
X
X
X
X
X
X
X
X
X
X
759/EEC
Rear registration plate
Directive 76/
L 262, 27.9.1976, p. 85
X
X
X
X
X
X
X
X
X
X
lamps
760/EEC
Headlamps (including
Directive 76/
L 262, 27.9.1976, p. 96
X
X
X
X
X
X
bulbs)
761/EEC
Directive 76/
Front fog lamps
L 262, 27.9.1976, p. 122
X
X
X
X
X
X
762/EEC
Directive 77/
Towing hooks
L 145, 13.6.1977, p. 41
X
X
X
X
X
X
389/EEC
Directive 77/
Rear fog lamps
L 220, 29.8.1977, p. 60
X
X
X
X
X
X
X
X
X
X
538/EEC
Directive 77/
Reversing lamps
L 220, 29.8.1977, p. 72
X
X
X
X
X
X
X
X
X
X
539/EEC
Directive 77/
Parking lamps
L 220, 29.8.1977, p. 83
X
X
X
X
X
X
540/EEC
Seat-belts and restraint sys-
Directive 77/
L 220, 29.8.1977, p. 95
X
X
X
X
X
X
tems
541/EEC
Directive 77/
Forward vision
L 267, 19.10.1977, p. 1
X
649/EEC
Identification of controls,
Directive 78/
L 81, 28.3.1978, p. 3
X
X
X
X
X
X
telltales and indicators
316/EEC
( 1 )
( 1 )
( 1 )
( 1 )
( 1 )
Directive 78/
Defrost/demist
L 81, 28.3.1978, p. 27
X
317/EEC
( 2 )
( 2 )
( 2 )
( 2 )
( 2 )
Directive 78/
Wash/wipe
L 81, 28.3.1978, p. 49
X
318/EEC
Directive
Heating systems
L 292, 9.11.2001, p. 21
X
X
X
X
X
X
X
X
X
X
2001/ 56/EC
Directive 78/
Wheel guards
L 168, 26.6.1978, p. 45
X
549/EEC
B
Applicabi
Regulatory act
lity
Item
Subject
Official Journal reference
reference
Directive 78/
Head restraints
L 325, 20.11.1978, p. 1
X
932/EEC
CO 2 emissions/fuel
Directive 80/
L 375, 31.12.1980, p. 36
X
X
consumption
1268/EEC
Engine power
Directive 80/
L 375, 31.12.1980, p. 46
X
X
X
X
X
X
(repealed with affect from 31
1269/EEC
Dec 2013)
Emissions (Euro IV and V)
X
X
X
X
Directive
heavy-duty vehicles.
( 10
( 10
( 10
( 10
L 275, 20.10.2005, p. 1
X
X
2005/ 55/EC
)
)
)
)
(repealed with affect from 31
Dec 2013)
Emissions (Euro VI) heavy
Regulation
duty vehicles/access to
X
X
X
X
X
41a
(EC) No
L 188, 18.7.2009, p.1
X
information.
595/2009
(shall apply from 31Dec 2013)
Directive 89/
Lateral protection
L 124, 5.5.1989, p. 1
X
X
X
X
297/EEC
X
X
X
Directive 91/
Spray-suppression systems
L 103, 23.4.1991, p. 5
X
X
X
X
(13)
(13)
(13)
226/EEC
Masses and dimensions
Directive
L 129, 14.5.1992, p. 1
X
(cars)
92/21/ EEC
Directive
Safety glazing
L 129, 14.5.1992, p. 11
X
X
X
X
X
X
X
X
X
X
92/22/ EEC
Directive
Tyres
L 129, 14.5.1992, p. 95
X
X
X
X
X
X
X
X
X
X
92/23/ EEC
Directive
Speed limitation devices
L 129, 14.5.1992, p. 154
X
X
X
X
92/24/ EEC
L 233, 28.8.1997, p. 1
X
X
X
X
X
X
X
X
X
Masses and dimensions
Directive
(other than vehicles
97/27/ EC
referred to in item 44)
External projections of
Directive 92/
L 409, 31.12.1992, p. 17
X
X
X
cabs
114/EEC
X
X
X
X
X
X
Directive
Couplings
L 195, 29.7.1994, p. 1
X
X
X
X
( 3 )
( 3 )
( 3 )
( 3 )
( 3 )
( 3 )
94/20/ EC
Directive
Flammability
L 281, 23.11.1995, p. 1
X
95/28/ EC
Directive
Buses and coaches
L 42, 13.2.2002, p. 1
X
X
2001/ 85/EC
X
Directive
( 6 )
Frontal impact
L 18, 21.1.1997, p. 7
96/79/ EC
X
X
Directive
( 11
( 11
Side impact
L 169, 8.7.1996, p. 1
96/27/ EC
)
)
(empty)
X
X
X
X
X
X
X
Vehicles intended for the
Directive
( 4 )
( 4 )
( 4 )
( 4 )
( 4 )
( 4 )
( 4 )
transport of dangerous
L 11, 16.1.1999, p. 25
98/91/ EC
goods
Directive
Front under-run protection
L 203, 10.8.2000, p. 9
X
X
2000/ 40/EC
X
Regulation
Pedestrian protection
(EC) No
L 35, 4.2.2009, p.1
X
78/2009
B
Applicabi
Regulatory act
lity
Item
Subject
Official Journal reference
reference
Recyclability
L 310, 25.11.2005, p. 10
X
X
Directive
—
2005/ 64/EC
Air-conditioning systems
L 161, 14.6.2006, p. 12
X
X
Directive
( 8 )
2006/ 40/EC
Hydrogen system
Regulation
L 35, 14.2.2006, p. 32
X
X
X
X
X
X
(EC) No
79/2009
General Safety
Regulation
OJ L 200, 31.7.2009,
X
X
X
X
X
X
X
X
X
X
(EC) No
p.1.
661/2009
Regulatory act applicable (see act for details).
Vehicles of this category shall be fitted with an adequate windscreen defrosting and demisting device.
Vehicles of this category shall be fitted with adequate windscreen washing and wiping devices.
The requirements of Directive 94/20/EC shall apply only to vehicles equipped with couplings.
The requirements of Directive 98/91/EC shall apply only when the manufacturer applies for the type-approval of a vehicle intended for the transport of dangerous
goods.
In case of LPG or CNG vehicles, pending the adoption of the relevant amendments to Directive 70/221/EEC in order to include LPG and CNG tanks, a vehicle
approval in
accordance with UNECE Regulation No 67, as amended by the 01 series of amendments or UNECE Regulation No 110 is required.
Not exceeding 2,5 tonnes technically permissible maximum laden mass.
Only for vehicles of category N 1 , class I as described in the first table in point 5.3.1.4 of Annex I to Directive 70/220/EEC.
For vehicles with a reference mass not exceeding 2610kg.At the manufacturer’s request may apply to vehicles with a reference mass not exceeding 2840kg.
For vehicles with a reference mass exceeding 2610kg and which did not benefit from the opportunity offered in footnote (9).
Only applicable to vehicles where the “seating reference point (‘R’ point)” of the lowest seat is not more than 700mm high above the ground level. The “R” point
is defined in Directive 77/649/EEC.
For vehicles with reference mass exceeding 26100kg which are not type-approved (at the manufacturer’s request and provided their reference mass does not
exceed 2840kg) under Regulation (EC) No 715/2007.
Applicable to those categories with effect from 9 April 2010. Directive 91/226/EEC is Not mandatory to off-road vehicles.
B
Appendix I
List of regulatory acts for type-approval of vehicles belonging to the category M 1 , produced in small series
pursuant to Article 22
Subject
Regulatory act reference
Official Journal reference
Permissible sound level
Directive 70/157/EEC
L 42, 23.2.1970, p. 16
A
Directive 70/220/EEC
L 76, 6.4.1970, p. 1
A
Emissions with the exception of the whole set of
requirements relating to On Board Diagnostics
(OBDs)
2a
Regulation (EC) No 715/
L 171, 29.6.2007, p. 1
A
Emissions (Euro 5 and 6) with the exception of
the whole set of requirements relating to On
Board Diagnostics (OBDs) and access to infor-
mation
Fuel tanks/Rear protective devices
Directive 70/221/EEC
L 76, 6.4.1970, p. 23
B
Rear registration plate space
Directive 70/222/EEC
L 76, 6.4.1970, p. 25
B
Steering effort
Directive 70/311/EEC
L 133, 18.6.1970, p. 10
C
Door latches and hinges
Directive 70/387/EEC
L 176, 10.8.1970, p. 5
C
Audible warning
Directive 70/388/EEC
L 176, 10.8.1970, p. 12
B
Indirect vision devices
Directive 2003/97/EC
L 25, 29.1.2004, p. 1
Braking
Directive 71/320/EEC
L 202, 6.9.1971, p. 37
A
Radio interference (electromagnetic
Directive 72/245/EEC
L 152, 6.7.1972, p. 15
compatibility)
Diesel smoke
Directive 72/306/EEC
L 190, 20.8.1972, p. 1
A
Interior fittings
Directive 74/60/EEC
L 38, 11.2.1974, p. 2
C
Anti-theft and immobiliser
Directive 74/61/EEC
L 38, 11.2.1974, p. 22
A
Protective steering
Directive 74/297/EEC
L 165, 20.6.1974, p. 16
C
Seat strength
Directive 74/408/EEC
L 221, 12.8.1974, p. 1
C
Exterior projections
Directive 74/483/EEC
L 266, 2.10.1974, p. 4
C
Speedometer and reverse gear
Directive 75/443/EEC
L 196, 26.7.1975, p. 1
B
Plates (statutory)
Directive 76/114/EEC
L 24, 30.1.1976, p. 1
B
Seat-belt anchorages
Directive 76/115/EEC
L 24, 30.1.1976, p. 6
B
Installation of lighting and light signalling
Directive 76/756/EEC
L 262, 27.9.1976, p. 1
B
devices
Retro reflectors
Directive 76/757/EEC
L 262, 27.9.1976, p. 32
X
B
Subject
Regulatory act reference
Official Journal reference
End-outline, front position (side), rear-position
Directive 76/758/EEC
L 262, 27.9.1976, p. 54
X
(side), stop, side marker, daytime running lamps
Direction indicators
Directive 76/759/EEC
L 262, 27.9.1976, p. 71
X
Rear registration plate lamps
Directive 76/760/EEC
L 262, 27.9.1976, p. 85
X
Headlamps (including bulbs)
Directive 76/761/EEC
L 262, 27.9.1976, p. 96
X
Front fog lamps
Directive 76/762/EEC
L 262, 27.9.1976, p. 122
X
Towing hooks
Directive 77/389/EEC
L 145, 13.6.1977, p. 41
B
Rear fog lamps
Directive 77/538/EEC
L 220, 29.8.1977, p. 60
X
Reversing lamps
Directive 77/539/EEC
L 220, 29.8.1977, p. 72
X
Parking lamps
Directive 77/540/EEC
L 220, 29.8.1977, p. 83
X
Seat-belts and restraint systems
Directive 77/541/EEC
L 220, 29.8.1977, p. 95
Forward vision
Directive 77/649/EEC
L 267, 19.10.1977, p. 1
A
Identification of controls, tell-tales and
Directive 78/316/EEC
L 81, 28.3.1978, p. 3
A
indicators
Defrost/demist
Directive 78/317/EEC
L 81, 28.3.1978, p. 27
C
Wash/wipe
Directive 78/318/EEC
L 81, 28.3.1978, p. 49
C
Heating system
Directive 2001/56/EC
L 292, 9.11.2001, p. 21
C
Wheel guards
Directive 78/549/EEC
L 168, 26.6.1978, p. 45
B
CO 2 emissions/Fuel consumption
Directive 80/1268/EEC
L 375, 31.12.1980, p. 36
A
Engine power
Directive 80/1269/EEC
L 375, 31.12.1980, p. 46
C
(repealed with affect from 31 Dec 2013)
Directive 2005/55/EC
L 275, 20.10.2005, p. 1
A
Emissions (Euro IV and V) heavy-duty vehicles
with the exception of the whole set of require-
ments relating to On Board Diagnostics (OBDs)
(repealed with affect from 31 Dec 2013)
Emissions (Euro VI) heavy duty vehicles/access
Regulation (EC) No
41a
L 188, 18.7.2009, p.1
A
to information.
595/2009
(shall apply from 31Dec 2013)
Masses and dimensions (cars)
Directive 92/21/EEC
L 129, 14.5.1992, p. 1
C
Safety glazing
Directive 92/22/EEC
L 129, 14.5.1992, p. 11
Tyres
Directive 92/23/EEC
L 129, 14.5.1992, p. 95
Couplings
Directive 94/20/EC
L 195, 29.7.1994, p. 1
Frontal impact
Directive 96/79/EC
L 18, 21.1.1997, p. 7
N/A
Side impact
Directive 96/27/EC
L 169, 8.7.1996, p. 1
N/A
B
Subject
Regulatory act reference
Official Journal reference
Regulation (EC) No
Pedestrian protection
L 35, 4.2.2009, p.1
N/A(*)
78/2009
Recyclability
Directive 2005/64/EC
L 310, 25.11.2005, p 10
N/A ( 5 )
Air-conditioning system
Directive 2006/40/EC
L 161, 14.6.2006, p. 12
Hydrogen system
Regulation (EC) No
L 35, 4.2.2009, p. 32
79/2009
X
General Safety
Regulation (EC) No
OJ L 200, 31.7.2009, p. 1
661/2009
P/A
Electronic sub-assembly.
Component.
Vehicle.
Installation prescriptions.
However, Article 7 of Directive
2005/64/EC applies.
EC type-approval certificate shall be issued; conformity of production shall be ensured.
No exemptions permitted except those specified in the regulatory act. Type-approval certificate and type-approval mark are not required. Test reports shall be
established by a notified technical service.
The technical prescriptions of the regulatory act shall be fulfilled. The tests provided for in the regulatory act shall be performed in their entirety; subject to the
agreement of the approval authority, they may be performed by the manufacturer himself; the manufacturer may be allowed to issue the technical report; a
type-approval certificate does not have to be issued and type-approval is not required.
The manufacturer shall demonstrate to the satisfaction of the approval authority that the essential requirements of the regulatory act are
fulfilled. N/A This regulatory act is not applicable (no requirements).
This regulatory act is not applicable (no requirements).
x
Any frontal protection system supplied with the vehicle shall comply with the requirements of Regulation (EC) No 78/2009. Shall be
provided with a type approval number and shall be marked accordingly.
This Regulation is partially applicable. The precise scope of application is established in the implementing measures to this Regulation
B
PART II
List of UNECE regulations recognised as an alternative to directives or regulations mentioned in Part I
Where reference is made to a separate Directive or Regulation in the table of Part I, an approval issued under the
following UNECE Regulations to which the Community has acceded as a Contracting Party to the United Nations
Economic Commission for Europe “Revised 1958 Agreement” by virtue of Council Decision 97/836/EC ( ), or
subsequent Council decisions as referred to in Article 3(3) of that Decision, shall be considered as equivalent to an EC
type-approval granted under the relevant separate Directive or Regulation.
Any further amendment of the UNECE Regulations listed below ( ) shall also be deemed to be equivalent, subject to
the Community Decision as referred to in Article 4(2) of Decision 97/836/EC.
Subject
Basic UNECE Regulation number
Series of amendments
Permissible sound level
Replacement silencing systems
Emissions
Replacement catalytic converters
Fuel tanks
LPG tanks
CNG tanks
Rear protective device
Steering effort
Door latches and hinges
Audible warning
Indirect vision devices
Braking
Braking
13H
Brake linings
Radio interference (electromagnetic com-
patibility)
Diesel smoke
Interior fittings
Anti-theft
Anti-theft and immobiliser
Vehicle Alarm Systems
97 116
01 00
Behaviour of steering device under impact
Seat strength
( ) OJ L 346, 17.12.1997, p. 78.
( ) For subsequent amendments, see UNECE TRANS/WP.29/343 in its latest
revision.
B
Subject
Basic UNECE Regulation number
Series of amendments
Seat strength (buses and coaches)
Exterior projections
Speedometer
Seat-belt anchorages
Installation of lighting and light signalling
devices
Retro reflectors
End-outline/front-position (side)/rear-posi-
tion (side)/stop lamps
Daytime running lamps
Side marker lamps
Direction indicators
Rear registration plate lamp
Headlamps (R 2 and HS 1 )
Headlamps (sealed beam)
Headlamps (H 1 , H 2 , H 3 , HB 3 , HB 4 , H 7 ,
and/or H 8, H 9 ,HIR1, HIR2 and/or H 11 )
Headlamps (H 4 )
Headlamps (halogen sealed beam)
Filament lamps for use in approved lamp
units
Headlamps with gas-discharge light
sources
Gas-discharge light sources for use in
approved gas-discharge lamp units
Headlamps (asymmetrical passing beam)
Adaptative front-lighting systems
Front fog lamps
Rear fog lamps
Reversing lamps
Parking lamps
Seat-belts and restraint systems
Child restraints
Front forward field of vision
Identification of controls, tell-tales and
indicators
Heating systems
B
Subject
Basic UNECE Regulation number
Series of amendments
Head restraints (combined with seats)
Head restraints
CO 2 emissions — Fuel consumption
Engine power
Emissions (Euro IV and V) heavy-duty
vehicles
Lateral protection
Safety glazing
Tyres, motor vehicles and their trailers
Tyres, commercial vehicles and their
trailers
Temporary-use spare wheels/tyres
Rolling sound
Speed limitation devices
Couplings
Close-coupling device
Flammability
Buses and coaches
Strength of superstructure (buses and
coaches)
Frontal impact
Side impact
Vehicles intended for the transport of
dangerous goods
Front under-run protection
Where the separate directive or regulation contains installation requirements, these apply also to components and separate technical units approved in accordance with
the UNECE Regulations.
(*) The numbering of the entries in this table refers to the numbering used in the table of Part I.”.
For Schedule V to the principal regulations, there shall be
Substitutes Schedule
V to the principal
substituted the following:-
regulations.
“SCHEDULE V
PROCEDURES TO BE FOLLOWED WITH RESPECT TO EC TYPE-APPROVAL
0. Objectives and scope
0.1. This Schedule establishes the procedures for the proper operation of the vehicle type-approval in accordance with
the provisions of Article 9.
0.2. It also includes
(a) the list of international standards which are of relevance for the designation of the technical services in
accordance with Article 41;
(b) the description of the procedure to be followed for the assessment of the skills of technical services in
accordance with Article 42;
(c) the general requirements for the drafting of test reports by technical services.
1. Type-approval process
When receiving an application for vehicle type-approval, the approval authority shall
(a) verify that all EC type-approval certificates issued pursuant to the regulatory acts which are applicable for
vehicle type-approval cover the vehicle type and correspond to the prescribed requirements;
(b) by reference to the documentation make sure that the vehicle specifications and data contained in Part I of the
vehicle information document are included in the data in the information packages and in the EC type-approval
certificates in respect of the relevant regulatory acts;
(c) when an item number in Part I of the information document is not included in the information package of any
of the regulatory acts, confirm that the relevant part or characteristic conforms to the particulars in the information
folder;
(d) on a selected sample of vehicles from the type to be approved carry out or arrange to be carried out inspections
of vehicle parts and systems to verify that the vehicle(s) is/are built in accordance with the relevant data contained
in the authenticated information package in respect of the relevant EC type-approval certificates;
(e) carry out or arrange to be carried out relevant installation checks in respect of separate technical units where
applicable;
(f) carry out or arrange to be carried out necessary checks in respect of the presence of the devices provided for in
footnotes (1) and (2) of Part I of Schedule IV where applicable;
(g) carry out or arrange to be carried out necessary checks in order to ensure that the requirements provided for in
footnote (5) of Part I of Schedule IV are fulfilled.
B
2. Combination of technical specifications
The number of vehicles to be submitted shall be sufficient to permit the proper check of the various combinations
to be type-approved according to the following criteria
Technical Specification
Vehicle Category
M1 M2 M3 N1
X
X
X
X
X
X
-
-
-
-
Engine
X
X
X
X
X
X
-
-
-
-
Gear box
-
X
X
X
X
X
X
X
X
X
Number of axles
X
X
X
X
X
X
-
-
-
-
Powered axles (number, position
and interconnection)
X
X
X
X
X
X
X
X
X
X
Steered axles (number and position)
X
X
X
X
X
X
X
X
X
X
Body styles
X
X
X
X
X
X
X
X
X
X
Number of doors
X
X
X
X
X
X
-
-
-
-
Hand of drive
X
X
X
X
X
X
-
-
-
-
Number of seats
X
X
X
X
X
X
-
-
-
-
Level of equipment
3. Specific Provisions
Where no approval certificates for any of the relevant regulatory acts are available, the approval authority shall
(a) arrange for the necessary tests and checks as required by each of the relevant regulatory acts;
(b) verify that the vehicle conforms to the particulars in the vehicle information folder and that it meets the
technical requirements of each of the relevant regulatory acts;
(c) carry out or arrange to be carried out relevant installation checks in respect of separate technical units where
applicable;
(d) carry out or arrange to be carried out necessary checks in respect of the presence of the devices provided for in
footnotes (1) and (2) of Part I of Schedule IV where applicable;
(e) carry out or arrange to be carried out necessary checks in order to ensure that the requirements provided for in
footnote (5) of Part I of Schedule IV are fulfilled.
Appendix 1
Standards with which the entities referred to in Article 41 have to comply
1. Activities related to testing for type-approval, to be carried out in accordance with the regulatory acts listed in
Schedule IV
1.1. Category A (tests performed in own facilities)
EN ISO/IEC 17025:2005 on the general requirements for the competence of testing and calibration laboratories.
A technical service designated for category A activities may carry out or supervise the tests provided for in the
regulatory acts for which it has been designated, in the facilities of a manufacturer or of a third party.
1.2. Category B (supervising of tests performed in the manufacturer’s facilities or in the facilities of a third party)
EN ISO/IEC 17020:2004 on the general criteria for the operation of various types of bodies performing
inspection.
Before performing or supervising any test in the facilities of a manufacturer or of a third party, the technical
service shall check that the tests facilities and measurement devices comply with the appropriate requirements of
the standard referred to in point 1.1.
2. Activities related to Conformity of Production
2.1. Category C (procedure for the Initial Assessment and surveillance audits of the manufacturer’s quality management
system)
EN ISO/IEC 17021:2006 on the requirements for bodies providing audit and certification of management
systems.
2.2. Category D (inspection or testing of production samples or supervision thereof)
EN ISO/IEC 17020:2004 on the general criteria for the operation of various types of bodies performing
inspection.
B
Appendix 2
Procedure for the assessment of the technical services
1. Purpose of this Appendix
1.1. This Appendix establishes the conditions according to which the assessment procedure of the technical services
shall be conducted by the competent authority referred to in Article 42.
1.2. These requirements shall apply mutatis mutandis to all technical services, irrespective of their legal status (inde-
pendent organisation, manufacturer or approval authority acting as technical service).
2. Principles of assessing
Assessing shall be characterised by reliance on a number of principles
— independence which is the basis for the impartiality and objectivity of the conclusions,
— an evidence-based approach which guarantees reliable and reproducible conclusions.
Auditors shall show trust and integrity. They shall respect confidentiality and discretion.
They shall report truthfully and accurately findings and conclusions.
3. Skills required of the auditors
3.1. The assessments may only be conducted by auditors having the technical and administrative knowledge necessary
for such purposes.
3.2. The auditors shall have been trained specifically for assessment activities. In addition, they shall have the specific
knowledge of the technical area in which the technical service will exercise its activities.
3.3. Without prejudice to points 3.1 and 3.2 of this Appendix, the assessment referred to in Article 42 shall be conducted
by auditors independent of the activities for which the assessment is conducted.
4. Application for designation
4.1. A duly authorised representative of the applicant technical service shall make a formal application to the competent
authority that includes the following
(a) general features of the technical service, including corporate entity, name, addresses, legal status and technical
resources;
(b) a detailed description including curriculum vitae of the personnel in charge of testing and of the managerial
staff as evidenced by the skills both educational and professional;
(c) in addition to the above, technical services which use virtual testing methods shall provide evidence of their
ability to work in a Computer-Aided-x environment;
(d) general information concerning the technical service such as its activities, its relationship in a larger corporate
entity if any, and addresses of all its physical location(s) to be covered by the scope of designation;
(e) an agreement to fulfil the requirements for designation and the other obligations of the technical service as
applicable in the relevant Directives;
(f) a description of the conformity assessment services that the technical service undertakes in the framework of
the applicable regulatory acts and a list of the regulatory acts for which the technical service applies for
designation, including limits of capability where applicable;
(g) a copy of the quality manual of the technical service.
B
4.2. The competent authority shall review for adequacy the information supplied by the technical service.
Resource review
The competent authority shall review its ability to carry out the assessment of the technical service, in terms of its
own policy, its competence and the availability of suitable auditors and experts.
Subcontracting the assessment
6.1. The competent authority may subcontract parts of the assessment to another designation authority or ask for support
from technical experts provided by other competent authorities. The subcontractors and experts have to be accepted by
the applicant technical service.
6.2. The competent authority shall take into account accreditation certificates with adequate scope in order to complete its
global assessment of the technical service.
Preparation for assessment
7.1. The competent authority shall formally appoint an assessment team. The former shall ensure that the expertise
brought to each assignment is appropriate. In particular, the team as a whole
(a) shall have appropriate knowledge of the specific scope for which designation is sought; and
(b) shall have understanding sufficient to make a reliable assessment of the competence of the technical service
to operate within its scope of designation.
7.2. The competent authority shall clearly define the assignment given to the assessment team. The task of the
assessment team is to review the documents collected from the applicant technical service and to conduct the on-
site assessment.
7.3. The competent authority shall agree, together with the technical service and the assigned assessment team, to the
date and schedule for the assessment. However, it remains the responsibility of the competent authority to pursue a
date that is in accordance with the surveillance and reassessment plan.
7.4. The competent authority shall ensure that the assessment team is provided with the appropriate criteria documents,
previous assessment records, and the relevant documents and records of the technical service.
On-site assessment
The assessment team shall conduct the assessment of the technical service at the premises of the technical service
from which one or more key activities are performed and, where relevant, shall perform witnessing at other
selected locations where the technical service operates.
Analysis of findings and assessment report
9.1. The assessment team shall analyse all relevant information and evidence gathered during the document and record
review and the on-site assessment. This analysis shall be sufficient to allow the team to determine the extent of
competence and conformity of the technical service with the requirements for designation.
9.2. The competent authority’s reporting procedures shall ensure that the following requirements are fulfilled.
9.2.1. A meeting shall take place between the assessment team and the technical service prior to leaving the site. At this
meeting, the assessment team shall provide a written and/or oral report on its findings obtained from the analysis.
An opportunity shall be provided for the technical service to ask questions about the findings, including non-
conformities, if any, and their basis.
9.2.2. A written report on the outcome of the assessment shall be promptly brought to the attention of the technical
service. This assessment report shall contain comments on competence and conformity, and shall identify non-
conformities, if any, to be resolved in order to conform to all of the requirements for designation.
9.2.3. The technical service shall be invited to respond to the assessment report and to describe the specific actions
taken or planned to be taken, within a defined time, to resolve any identified non-conformities.
B
9.3. The competent authority shall ensure that the responses of the technical service to resolve non-conformities are
reviewed to see if the actions appear to be sufficient and effective. If the technical service responses are found not to
be sufficient, further information shall be requested. Additionally, evidence of effective implementation of actions
taken may be requested, or a follow-up assessment may be carried out to verify effective implementation of
corrective actions.
9.4. The assessment report shall include, as a minimum the following
(a) unique identification of the technical service;
(b) date(s) of the on-site assessment;
(c) name(s) of the auditors(s) and/or experts involved in the assessment;
(d) unique identification of all premises assessed;
(e) proposed scope of designation that was assessed;
(f) a statement on the adequacy of the internal organisation and procedures adopted by the technical service to
give confidence in its competence, as determined through its fulfilment of the requirements for designation;
(g) information on the resolution of all non-conformities;
(h) a recommendation of whether the applicant should be designated or confirmed as technical service and, if so,
the scope of designation.
Granting/confirming a designation
10.1. The approval authority shall, without undue delay, make the decision on whether to grant, confirm or extend
designation on the basis of the report(s) and any other relevant information.
10.2. The approval authority shall provide a certificate to the technical service. This certificate shall identify the
following
(a) the identity and logo of the approval authority;
(b) the unique identity of the designated technical service;
(c) the effective date of granting of designation and the expiry date;
(d) a brief indication of or a reference to the scope of designation (applicable directives, regulations or part of
them);
(e) a statement of conformity and a reference to the present Directive.
Reassessment and surveillance
11.1. Reassessment is similar to an initial assessment except that experience gained during previous assessments shall
be taken into account. Surveillance on-site assessments are less comprehensive than reassessments.
11.2. The competent authority shall design its plan for reassessment and surveillance of each designated technical service
so that representative samples of the scope of designation are assessed on a regular basis.
The interval between on-site assessments, whether reassessment or surveillance, depends on the proven stability
that the technical service has reached.
11.3. When, during surveillance or reassessments, non-conformities are identified, the competent authority shall define
strict time limits for corrective actions to be implemented.
B
11.4. When the corrective or improvement actions have not been taken within the agreed timeframe or are not deemed to
be sufficient, the competent authority shall adopt appropriate measures, such as conducting a further assessment or
suspending/withdrawing the designation for one or more of the activities for which the technical service has been
designated.
11.5. When the competent authority decides to suspend or withdraw the designation of a technical service, it shall
inform the latter by registered mail. In any case, the competent authority shall adopt all the necessary measures to
ensure the continuity of the activities already undertaken by the technical service.
Records on designated technical services
12.1. The competent authority shall maintain records on technical services to demonstrate that requirements for
designation, including competence, have been effectively fulfilled.
12.2. The competent authority shall keep the records on technical services secure to ensure confidentiality.
12.3. Records on technical services shall include at least the following
(a) relevant correspondence;
(b) assessment records and reports;
(c) copies of designation certificates.
B
Appendix 3
General requirements concerning the format of the test reports
1. For each of the regulatory acts listed in Part I of Schedule IV, the test report shall comply with the provisions of
Standard EN ISO/IEC 17025:2005. In particular it shall include the information mentioned in point 5.10.2, including
footnote (1) of that Standard.
2. The template of the test reports shall be laid down by the approval authority in accordance with its rules of good
practice.
3. The test report shall be drafted in the official language of the Community determined by the approval authority.
4. Moreover it shall include at least the following information
(a) the identification of the vehicle, component or separate technical unit tested;
(b) a detailed description of the vehicle, component or separate technical unit characteristics in connection with the
regulatory act;
(c) the results of the measurements specified in the relevant regulatory acts and, when required, the limits or
thresholds which are to be met;
(d) in regard to each measurement mentioned in point 4(c) the relevant decision: passed or failed;
(e) a detailed statement of compliance with the various provisions which are to be met, i.e. such provisions for
which it is not required to make measurements.
Example from Section 3.2.2 of Annex I to Council Directive 76/114/EEC ( 1 )
“Check that the vehicle identification number is placed in such a way that it cannot be obliterated or
deteriorate”;
the report shall include a statement such as: “the place of stamping the vehicle identification number fulfils the
requirements of Section 3.2.2 of Schedule I”;
(f) when test methods other than those prescribed in the regulatory acts are permitted the report shall include a
description of the test method used for performing the test.
The same applies when alternative provisions in the regulatory acts may be used;
(g) pictures taken during testing, the number of which shall be decided by the approval authority.
In the case of virtual testing, screen prints or other suitable evidence may replace pictures;
(h) conclusions drawn up;
(i) when opinions and interpretations have been made, they shall be documented properly and marked as such in
the test report.
5. When the tests are conducted on a vehicle, component or technical unit that combines a number of most unfavourable
features with regard to the required level of performance to be achieved (i.e. the worst-case), the test report shall
include a reference stating how the selection has been made by the manufacturer in agreement with the approval
authority. ”.
5. For Schedule VI to the principal regulations, there shall
Substitutes Schedule
VI to the principal
be substituted the following:-
regulations.
B
“SCHEDULE VI
MODELS OF THE TYPE-APPROVAL CERTIFICATE
MODEL A
(to be used for type-approval of a vehicle)
Maximum format: A4 (210 × 297 mm)
EC VEHICLE TYPE-APPROVAL CERTIFICATE
Stamp of type-approval authority
Communication concerning
Of a type of
EC type-approval ( )
— complete vehicle ( )
extension of EC type-approval ( )
— completed vehicle ( )
refusal of EC type-approval ( )
— incomplete vehicle ( )
withdrawal of EC type-approval ( )
— vehicle with complete and incomplete variants ( )
— vehicle with completed and incomplete variants ( )
with regard to Directive 2007/46/EC as last amended by Directive …./…/EC / Regulation (EC) No. …/… ( )
EC type-approval number
Reason for extension
SECTION I
0.1. Make (trade name of manufacturer)
0.2. Type
0.2.1. Commercial name(s) ( )
0.3. Means of identification of type, if marked on the vehicle
0.3.1. Location of that marking
0.4. Category of vehicle ( )
0.5. Name and address of manufacturer of the complete vehicle ( )
( ) Delete where not applicable.
( ) If not available at the time of granting the type-approval, this item shall be completed at the latest when the vehicle is introduced on
the market.
( ) As defined in Annex II.A.
B
Name and address of manufacturer of the base vehicle ( ) ( )
Name and address of manufacturer of the latest built stage of the incomplete vehicle ( ) ( )
Name and address of manufacturer of the completed vehicle ( ) ( )
0.8.
Name(s) and address(es) of assembly plant(s)
0.9.
Name and address of the manufacturer's representative (if any)
SECTION II
The undersigned hereby certifies the accuracy of the manufacturer's description in the attached information document of the
vehicle(s) described above ((a) sample(s) having been selected by the EC type-approval authority and submitted by the
manufacturer as prototype(s) of the vehicle type) and that the attached test results are applicable to the vehicle type.
1. For complete and completed vehicles/variants ( )
The vehicle type meets/does not meet ( ) the technical requirements of all the relevant regulatory acts as
prescribed in Annex IV and Annex XI ( ) ( ) to Directive 2007/46/EC.
2. For incomplete vehicles/variants ( )
The vehicle type meets/does not meet ( ) the technical requirements of the regulatory acts listed in the table on
side 2.
3. The approval is granted/refused/withdrawn ( ).
4. The approval is granted in accordance with Article 20 and the validity of the approval is thus limited to dd/mm/yy.
(Place)
(Signature)
(Date)
Attachments: Information package.
Test results (see Annex VIII).
Name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign certificates of conformity and a
statement of their position in the company.
NB: If this model is used for type-approval pursuant to Articles 20, 22 or 23, it may not bear the heading “EC Vehicle
Type-Approval Certificate”, except
- in the case mentioned in Article 20 where the Commission has decided to allow a Member State to grant
a type-
approval in accordance with this Directive,
- in the case of vehicles of the category M 1 , type-approved according to the procedure prescribed in Article 22.
( ) See side 2.
B
Side 2
This EC type-approval is, where incomplete and completed vehicles, variants or versions are concerned, based on the
approval(s) for incomplete vehicles listed below
Stage 1: Manufacturer of the base vehicle
EC type-approval number
Dated
Applicable to variants or versions (as appropriate)
Stage 2: Manufacturer
EC type-approval number
Dated
Applicable to variants or versions (as appropriate)
Stage 3: Manufacturer
EC type-approval number
Dated
Applicable to variants or versions (as appropriate)
In the case where the approval includes one or more incomplete variants or versions (as appropriate), list those variants or
versions (as appropriate) which are complete or completed. Complete/completed variant(s): List of requirements
applicable to the approved incomplete vehicle type, variant or version (as appropriate, taking account of
the scope and latest amendment to each of the regulatory acts listed below).
Applicable to variant
Regulatory act
Item
Subject
Last amended
or, if need be, to
reference
version
(List only subjects for which an EC type-approval exists.)
In the case of special purpose vehicles, exemptions granted or special provisions applied pursuant to Annex XI and
exemptions granted pursuant to Article 20
Kind of approval and nature
Applicable to variant or, if
Regulatory act reference
Item number
of exemption
need be, to version
B
Appendix I
List of regulatory acts to which the type of vehicle complies
(to be filled in only in the case of type-approval in accordance with Article 6(3))
Regulatory act reference
Subject
As amended by
Applicable to versions
( 1 )
1. Permissible sound level
Directive 70/157/EEC
2. Emissions
Directive 70/220/EEC
2a. Emissions (Euro 5 and 6) light-duty
Regulation (EC) No
vehicles/access to information
715/2007
3. Fuel tanks/Rear protective devices
Directive 70/221/EEC
4. Rear registration plate space
Directive 70/222/EEC
5. Steering effort
Directive 70/311/EEC
6. Door latches and hinges
Directive 70/387/EEC
7. Audible warning
Directive 70/388/EEC
8. Rear visibility
Directive 71/127/EEC
8a. Indirect vision devices
Directive 2003/97/EC
9. Braking
Directive 71/320/EEC
10. Radio interference
Directive 72/245/EEC
(electromagnetic compatibility)
11. Diesel smoke
Directive 72/306/EEC
12. Interior fittings
Directive 74/60/EEC
Anti-theft and immobiliser
Directive 74/61/EEC
Protective steering
Directive 74/297/EEC
Seat strength
Directive 74/408/EEC
Exterior projections
Directive 74/483/EEC
Speedometer and reverse gear
Directive 75/443/EEC
B
Regulatory act reference
Subject
As amended by
Applicable to versions
( 1 )
Plates (statutory)
Directive 76/114/EEC
Seat-belt anchorages
Directive 76/115/EEC
Installation of lighting and light
Directive 76/756/EEC
signalling devices
Retro reflectors
Directive 76/757/EEC
End-outline, front-position (side),
rear-position (side), stop, side marker,
Directive 76/758/EEC
daytime running lamps
Direction indicators
Directive 76/759/EEC
Rear registration plate lamps
Directive 76/760/EEC
Headlamps (including bulbs)
Directive 76/761/EEC
Front fog lamps
Directive 76/762/EEC
Towing hooks
Directive 77/389/EEC
Rear fog lamps
Directive 77/538/EEC
Reversing lamps
Directive 77/539/EEC
Parking lamps
Directive 77/540/EEC
Seat-belts and restraint systems
Directive 77/541/EEC
Forward vision
Directive 77/649/EEC
Identification of controls, tell-tales
Directive 78/316/EEC
and indicators
Defrost/demist
Directive 78/317/EEC
Wash/wipe
Directive 78/318/EEC
Heating systems
Directive 2001/56/EC
Wheel guards
Directive 78/549/EEC
Head restraints
Directive 78/932/EEC
CO 2 emissions/Fuel consumption
Directive
80/1268/EEC
B
Subject
Regulatory act reference ( 1 )
As amended by
Applicable to versions
Engine power
(shall be repealed with effect from 31 st Dec 2013)
Directive 80/1269/EEC
Emissions (Euro IV and V) heavy-duty
Directive 2005/55/EC
vehicles.
(shall be repealed with effect from 31 st Dec 2013)
41a. Emissions (Euro VI) heavy duty
Regulation (EC) No
vehicles/access to information.
595/2009
(Shall apply from 13Dec 2013)
Lateral protection
Directive 89/297/EEC
Spray-suppression systems
Directive 91/226/EEC
Masses and dimensions (cars)
Directive 92/21/EEC
Safety glazing
Directive 92/22/EEC
Tyres
Directive 92/23/EEC
Speed limitation devices
Directive 92/24/EEC
Masses and dimensions (other than vehicles
Directive 97/27/EC
referred to in item 44)
External projections of cabs
Directive 92/114/EEC
Couplings
Directive 94/20/EC
Flammability
Directive 95/28/EC
Buses and coaches
Directive 2001/85/EC
Frontal impact
Directive 96/79/EC
Side impact
Directive 96/27/EC
Vehicles intended for the transport of
Directive 98/91/EC
dangerous goods
Front under-run protection
Directive 2000/40/EC
Pedestrian protection
Regulation (EC) No 78/2009
Recyclability
Directive 2005/64/EC
Air-conditioning systems
Directive 2006/40/EC
Hydrogen system
Regulation (EC) No
79/2009
General Safety
Regulation (EC) No
661/2009
( ) Or UNECE Regulations that are considered to be equivalent.
B
Model B
(to be used for type-approval of a system or type-approval of a vehicle with regard to a system)
Maximum format: A4 (210 × 297 mm)
EC TYPE-APPROVAL CERTIFICATE
Stamp of type-approval authority
Communication concerning
- EC type-approval ( )
- extension of EC type-approval ( )
of a type of system/type of a vehicle with regard to a system ( )
=
- refusal of EC type-approval ( )
;
- withdrawal of EC type-approval ( )
with regard to Directive …/…/EC / Regulation (EC) No …/… ( ), as last amended by Directive …/…/EC / Regulation
(EC) No …/… ( )
EC type-approval number
Reason for extension
SECTION I
0.1. Make (trade name of manufacturer)
0.2. Type
0.2.1. Commercial name(s) (if available)
0.3. Means of identification of type, if marked on the vehicle ( )
0.3.1. Location of that marking
0.4. Category of vehicle ( )
0.5. Name and address of manufacturer
0.8. Name(s) and address(es) of assembly plant(s)
0.9. Name and address of the manufacturer's representative (if any)
SECTION II
1. Additional information (where applicable): see Addendum.
2. Technical service responsible for carrying out the tests
3. Date of test report
( ) Delete where not applicable.
( ) If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit
types covered by this information document, such characters shall be represented in the documentation by the symbol “?” (e.g.
ABC??123??).
( ) As defined in Annex II, Section A.
B
Number of test report
Remarks (if any): see Addendum.
Place
Date
Signature
Attachments
Information package
Test report
B
Addendum
to EC type-approval certificate No …
1. Additional information
1.1.
[…]
1.1.1. […]
[…]
2. Type-approval number of each component or separate technical unit installed on the vehicle type to comply
with this Directive or Regulation
2.1.
[…]
3. Remarks
3.1.
[…]
B
MODEL C
(to be used for component/separate technical unit type-approval)
Maximum format: A4 (210 × 297 mm)
EC TYPE-APPROVAL CERTIFICATE
Stamp of type-approval authority
Communication concerning
— EC type-approval ( ) 9
of a type of component/separate technical unit ( )
— extension of EC type-approval ( )
— refusal of EC type-approval ( )
— withdrawal of EC type-approval ( )
with regard to Directive …/…/EC / Regulation (EC) No …/… ( ), as last amended by Directive …/…/EC / Regulation
(EC) No …/… ( )
EC type-approval number
Reason for extension
SECTION I
0.1. Make (trade name of manufacturer)
0.2. Type
0.3. Means of identification of type, if marked on the component/separate technical unit ( ) ( )
0.3.1. Location of that marking
0.5. Name and address of manufacturer
0.7. In the case of components and separate technical units, location and method of affixing of the EC approval mark
0.8. Name(s) and address(es) of assembly plant(s)
0.9. Name and address of the manufacturer's representative (if any)
SECTION II
1. Additional information (where applicable): see Addendum
2. Technical service responsible for carrying out the tests
3. Date of test report
4. Number of test report
5. Remarks (if any): see Addendum
( ) Delete where not applicable.
( ) If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit
types covered by this information document, such characters shall be represented in the documentation by the symbol “?” (e.g..
ABC??123??).
B
6. Place
7. Date
8. Signature
Attachments
Information package.
Test report.
B
Addendum
to EC type-approval certificate No …
1. Additional information
1.1. […]
1.1.1. […]
[…]
2. Restriction of use of the device (if any)
2.1. […]
3. Remarks
3.1. […]: ”.
6. For Schedule X to the principal regulations, there shall be
Substitutes Schedule
X to the principal
substituted the following:-
regulations.
B
“ SCHEDULE X
CONFORMITY OF PRODUCTION PROCEDURES
0. Objectives
0.1. The conformity of production procedure aims to ensure that each produced vehicle, system, component and technical
separate unit is in conformity with the approved type.
0.2. Procedures include inseparably the assessment of quality management systems, referred to below as “initial
assessment” and verification of the approval subject and product-related controls, referred to as “product conformity
arrangements”.
1. Initial assessment
1.1. The approval authority of a Member State shall verify the existence of satisfactory arrangements and procedures for
ensuring effective control so that components, systems, separate technical units or vehicles when in production conform to
the approved type.
1.2. Guidance for conducting assessments may be found in Standard EN ISO 19011:2002 — Guidelines for quality and/or
environmental management systems auditing.
1.3. The requirements referred to in point 1.1 shall be verified to the satisfaction of the authority granting type- approval.
That authority shall be satisfied with the initial assessment and the product conformity arrangements at section 2
below, taking account as necessary of one of the arrangements described in points 1.3.1 to 1.3.3, or a
combination of those arrangements in full or in part as appropriate.
1.3.1. The actual initial assessment and/or verification of product conformity arrangements shall be carried out by the
approval authority granting the approval or an appointed body acting on behalf of the approval authority.
1.3.1.1. When considering the extent of the initial assessment to be carried out, the approval authority may take account
of available information relating to
(a) the manufacturer’s certification described in point 1.3.3 below, which has not been qualified or recognised
under that point;
(b) in the case of component or separate technical unit type-approval, quality system assessments performed in
the component or separate technical unit manufacturer’s premises by vehicle manufacturer(s), according to one
or more of the industry sector specifications satisfying the requirements in harmonised standard EN ISO
9001:2008.
1.3.2. The actual initial assessment and/or verification of product conformity arrangements may also be carried out by
the approval authority of another Member State or the appointed body designated for this purpose by the approval
authority.
1.3.2.1. In such a case, the approval authority of the other Member State shall prepare a statement of compliance
outlining the areas and production facilities it has covered as relevant to the product(s) to be type-approved and to the
regulatory acts according to which these products are to be type-approved.
1.3.2.2. On receiving an application for a compliance statement from the approval authority of a Member State granting
type-approval, the approval authority of another Member State shall send forthwith the statement of compliance or
advise that it is not in a position to provide such a statement.
B
1.3.2.3. The statement of compliance shall include at least the following
(a) Group or company (e.g. XYZ Automotive)
(b) Particular organisation (e.g. European Division)
(c) Plants/Sites (e.g. Engine Plant 1 (United Kingdom) — Vehicle Plant 2 (Germany))
(d) Vehicle/Component range (e.g. All Category M 1 models)
(e) Areas assessed (e.g. Engine assembly, body pressing and assembly, vehicle assembly)
(f) Documents examined (e.g. Company and site quality manual and procedures)
(g) Date of the assessment (e.g. Audit conducted from 18 to 30.5.2009)
(h) Planned monitoring visit (e.g. October 2010)
1.3.3. The approval authority shall also accept the manufacturer’s suitable certification to harmonised standard EN ISO
9001:2008 or an equivalent harmonised standard as satisfying the initial assessment requirements of point 1.3. The
manufacturer shall provide details of the certification and undertake to inform the approval authority of any revisions to its
validity or scope.
1.4. For the purpose of vehicle type-approval, the initial assessments carried out for granting approvals for systems,
components and technical units of the vehicle need not be repeated but shall be completed by an assessment covering the
locations and activities relating to the assembly of the whole vehicle not covered by the former assessments.
2. Product conformity arrangements
2.1. Every vehicle, system, component or separate technical unit approved pursuant to this Directive or a separate
Directive or Regulation shall be so manufactured as to conform to the type approved by meeting the requirements of this
Directive or the applicable regulatory acts listed in Schedule IV.
2.2. The approval authority of a Member State shall verify the existence of adequate arrangements and documented control
plans, to be agreed with the manufacturer for each approval, to carry out at specified intervals those tests or associated
checks necessary to verify continued conformity with the approved type including specifically physical tests specified in the
regulatory acts.
2.3. The holder of the type-approval shall, in particular
2.3.1. ensure the existence and application of procedures for effective control of the conformity of products (vehicles,
systems, components or separate technical units) to the approved type;
2.3.2. have access to the testing or other appropriate equipment necessary for checking the conformity to each approved
type;
2.3.3. ensure that test or check results data are recorded and that annexed documents remain available for a period to be
determined in agreement with the approval authority. This period shall not exceed 10 years;
2.3.4. analyse the results of each type of test or check, in order to verify and ensure the stability of the product
characteristics, making allowance for variation of an industrial production;
2.3.5. ensure that for each type of product, at least the checks prescribed in this Directive and the tests prescribed in the
applicable regulatory acts listed in Schedule IV are carried out;
2.3.6. ensure that any set of samples or test pieces, giving evidence of non-conformity in the type of test or check in
question gives rise to a further sampling and test or check. All the necessary steps shall be taken to restore conformity of
the corresponding production;
2.3.7. in the case of vehicle type-approval, the checks referred to in point 2.3.5 shall at least consist in verifying the
correct built specifications in relation to the approval and the information required for certificates of conformity given in
Schedule IX.
3. Continued verification arrangements
The authority which has granted type-approval may at any time verify the conformity control methods applied
in each production facility.
The normal arrangements shall be to monitor the continued effectiveness of the procedures laid down in
Sections 1 and 2 (initial assessment and product conformity arrangements) of this Schedule.
3.1.1.1. Surveillance activities carried out by the technical services (qualified or recognised as required in point 1.3.3)
shall be accepted as satisfying the requirements of point 3.1.1 with regard to the procedures established at
initial assessment.
3.1.1.2. The normal frequency of verifications by the approval authority (other than those referred to in point 3.1.1.1)
shall be such as to ensure that the relevant controls applied in accordance with Sections 1 and 2 are reviewed
over a period consistent with the climate of trust established by the approval authority.
At every review, records of tests or checks and records of production shall be made available to the inspector;
in particular, records of those tests or checks documented as required in point 2.2.
The inspector may select samples at random to be tested in the manufacturer’s laboratory or in the facilities of
the technical service. In such a case only physical test shall be carried out. The minimum number of samples
may be determined according to the results of the manufacturer’s own verification.
Where the level of control appears unsatisfactory, or when it seems necessary to verify the validity of the tests
carried out in accordance with point 3.2, the inspector shall select samples to be sent to a technical service to
perform physical tests.
Where unsatisfactory results are found during an inspection or a monitoring review, the approval authority shall
ensure that all necessary steps are taken to restore conformity of production as rapidly as possible.”.
7. For Schedule XI to the principal regulations, there shall
Substitutes Schedule
XI to the principal
be substituted the following:-
regulations.
B
“SCHEDULE XI
LIST OF REGULATORY ACTS SETTING THE REQUIREMENTS FOR THE PURPOSE OF EC TYPE-
APPROVAL OF SPECIAL PURPOSE VEHICLES
Appendix 1
Motor-caravans, ambulances and hearses
Item
Subject
Regulatory act reference
M 1 2 500 ( 1 ) kg
M 1 > 2 500 ( 1 ) kg
Permissible sound level
H
G + H
G + H
G + H
Directive
70/157/EEC
Emissions
Q
G + Q
G + Q
G + Q
Directive
70/220/EEC
2a
Q
G + Q
G + Q
Emissions (Euro 5 and 6) light-duty
Regulation (EC) No
vehicles/access to information
715/2007
Fuel tanks/rear protective devices
F
F
F
F
Directive
70/221/EEC
Rear registration plate space
X
X
X
X
Directive
70/222/EEC
Steering effort
X
G
G
G
Directive
70/311/EEC
Door latches and hinges
B
G + B
Directive
70/387/EEC
Audible warning
X
X
X
X
Directive
70/388/EEC
Devices for indirect vision
2003/97/EC
X
G
G
G
Braking
X
G
G
G
Directive
71/320/EEC
X
X
X
X
Radio interference (electromagnetic
Directive
compatibility)
72/245/EEC
Diesel smoke
H
H
H
H
Directive
72/306/EEC
Interior fittings
C
G + C
Directive 74/60/EEC
Anti-theft and immobiliser
X
G
G
G
Directive 74/61/EEC
Protective steering
X
G
Directive
74/297/EEC
Seat strength
D
G + D
G + D
G + D
Directive
74/408/EEC
Exterior projections
X for the cab; A
G for the cab; A
Directive
for the remaining
for the remaining
74/483/EEC
part
part
B
Item
Subject
Regulatory act reference
M 1 2 500 ( 1 ) kg
M 1 > 2 500 ( 1 ) kg
Speedometer and reverse gear
X
X
X
X
Directive
75/443/EEC
Plates (statutory)
X
X
X
X
Directive
76/114/EEC
Seat-belt anchorages
D
G + L
G + L
G + L
Directive
76/115/EEC
Installation of lighting and light sig-
Directive 76756/EEC
A + N
A + G+N for the
A + G+N
A + G+N
nalling devices
cab; A + N for the
for the cab;
for the cab;
remaining part
A + N for
A + N for
the
the remain-
remaining
ing part
part
Retro reflectors
X
X
X
X
Directive
76/757/EEC
X
X
X
X
End-outline, front-side, rear-side,
Directive
stop, day time running, side-marker
76/758/EEC
lamps
Direction indicators
X
X
X
X
Directive
76/759/EEC
Rear registration plate lamps
X
X
X
X
Directive
76/760/EEC
Headlamps (including bulbs)
X
X
X
X
Directive
76/761/EEC
Front fog lamps
X
X
X
X
Directive
76/762/EEC
Towing hooks
E
E
E
E
Directive
77/389/EEC
Rear fog lamps
X
X
X
X
Directive
77/538/EEC
Reversing lamps
X
X
X
X
Directive
77/539/EEC
Parking lamps
X
X
X
X
Directive
77/540/EEC
Seat-belts and restraint systems
D
G + M
G + M
G + M
Directive
77/541/EEC
Forward vision
X
G
Directive
77/649/EEC
X
X
X
X
Identification of controls, tell-tales
Directive
and indicators
78/316/EEC
Defrost/demist
X
G + O
O
O
Directive
78/317/EEC
Wash/wipe
X
G + O
O
O
Directive
78/318/EEC
Heating systems
X
X
X
X
Directive 2001/56/EC
Wheel guards
X
G
Directive
78/549/EEC
B
Item
Subject
Regulatory act reference
M 1 2 500 ( 1 ) kg
M 1 > 2 500 ( 1 ) kg
Head restraints
D
G + D
Directive
78/932/EEC
CO 2 emissions/fuel consumption
N/A
N/A
Directive
80/1268/EEC
Engine power
X
X
X
X
Directive
(shall be repealed with effect from 31 st Dec
80/1269/EEC
2013)
Emissions (Euro IV and V) heavy-
H
G + H
G + H
G + H
duty vehicles
Directive 2005/55/EC
(shall be repealed with effect from 31 st Dec
2013)
41a
Emissions (Euro VI) heavy duty
G + H
G + H
G + H
G + H
Regulation (EC) No
vehicles/access to information
595/2009
(shall apply from 31Dec 2013)
Masses and dimensions (cars)
X
X
Directive 92/21/EEC
Safety glazing
J
G + J
G + J
G + J
Directive 92/22/EEC
Tyres
X
G
G
G
Directive 92/23/EEC
Speed limitation devices
X
Directive 92/24/EEC
X
X
Masses and dimensions (other than
Directive 97/27/EC
vehicles referred to in item 44)
Couplings
X
G
G
G
Directive 94/20/EC
Flammability
Directive 95/28/EC
G for the
cab; X for
the
remaining
part
Buses and coaches
A
A
Directive 2001/85/EC
Front impact
N/A
N/A
Directive 96/79/EC
Side impact
N/A
N/A
Directive 96/27/EC
Pedestrian protection
X
N/A (*)
Regulation (EC)
78/2009
Recyclability
N/A
N/A
Directive 2005/64/EC
Air-conditioning system
X
X
Directive 2006/40/EC
Hydrogen system
Q
G + Q
G +Q
G + Q
Regulation (EC) No
79/2009
General Safety
P/A
P/A
P/A
P/A
Regulation (EC) No
661/2009
( ) Technically permissible maximum laden mass.
( ) Not exceeding 3,5 tonnes maximum laden mass.
(*) Any frontal protection system supplied with the vehicle shall comply with the requirements of Regulation (EC) No 78/2009, shall be provided with a type
approval and shall be marked accordingly.
B
Appendix 2
Armoured vehicles
Item
Subject
Regulatory act reference
Directive
Permissible sound level
X
X
X
X
X
X
70/157/EEC
Directive
Emissions
A
A
A
A
A
A
70/220/EEC
Emissions (Euro 5 and 6) light-duty
Regulation (EC) No
2a
A
A
A
A
vehicles/access to information
715/2007
Directive
Fuel tanks/rear protective devices
X
X
X
X
X
X
X
X
X
X
70/221/EEC
Directive
Rear registration plate space
X
X
X
X
X
X
X
X
X
X
70/222/EEC
Directive
Steering effort
X
X
X
X
X
X
X
X
X
X
70/311/EEC
Directive
Door latches and hinges
X
X
X
X
70/387/EEC
Directive
A +
A +
A +
A +
A +
A +
Audible warning
70/388/EEC
K
K
K
K
K
K
Devices for indirect vision
Directive 2003/97/EC
A
A
A
A
A
A
Directive
Braking
X
X
X
X
X
X
X
X
X
X
71/320/EEC
Radio interference (electromagnetic
Directive
X
X
X
X
X
X
X
X
X
X
compatibility)
72/245/EEC
Directive
Diesel smoke
X
X
X
X
X
X
72/306/EEC
Interior fittings
Directive 74/60/EEC
A
Anti-theft and immobiliser
Directive 74/61/EEC
X
X
X
X
X
X
Directive
N/
N/
Protective steering
74/297/EEC
A
A
Directive
Seat strength
X
D
D
D
D
D
74/408/EEC
Directive
Exterior projections
A
74/483/EEC
Directive
Speedometer and reverse gear
X
X
X
X
X
X
75/443/EEC
Directive
Plates (statutory)
X
X
X
X
X
X
X
X
X
X
76/114/EEC
Directive
Seat-belt anchorages
A
A
A
A
A
A
76/115/EEC
Installation of lighting and light sig-
Directive
A +
A +
A +
A +
A +
A +
A +
A +
A +
A +
nalling devices
76/756/EEC
N
N
N
N
N
N
N
N
N
N
Directive
Retro reflectors
X
X
X
X
X
X
X
X
X
X
76/757/EEC
B
Item
Subject
Regulatory act reference
End-outline, front-side, rear-side,
Directive
stop, day time running, side-marker
X
X
X
X
X
X
X
X
X
X
76/758/EEC
lamps
Directive
Direction indicators
X
X
X
X
X
X
X
X
X
X
76/759/EEC
Directive
Rear registration plate lamps
X
X
X
X
X
X
X
X
X
X
76/760/EEC
Directive
Headlamps (including bulbs)
X
X
X
X
X
X
76/761/EEC
Directive
Front fog lamps
X
X
X
X
X
X
76/762/EEC
Directive
Towing hooks
A
A
A
A
A
A
77/389/EEC
Directive
Rear fog lamps
X
X
X
X
X
X
X
X
X
X
77/538/EEC
Directive
Reversing lamps
X
X
X
X
X
X
X
X
X
X
77/539/EEC
Directive
Parking lamps
X
X
X
X
X
X
77/540/EEC
Directive
Seat-belts and restraint systems
A
A
A
A
A
A
77/541/EEC
Directive
Forward vision
S
77/649/EEC
Identification of controls, tell-tales
Directive
X
X
X
X
X
X
and indicators
78/316/EEC
Directive
Defrost/demist
A
O
O
O
O
O
78/317/EEC
Directive
Wash/wipe
A
O
O
O
O
O
78/318/EEC
Heating systems
Directive 2001/56/EC
X
X
X
X
X
X
X
X
X
X
Directive
Wheel guards
X
78/549/EEC
Directive
Head restraints
X
78/932/EEC
Directive
CO 2 emissions/fuel consumption
N/A
80/1268/EEC
Engine power
Directive
X
X
X
X
X
X
(shall be repealed with effect from 31 st Dec
80/1269/EEC
2013)
Emissions (Euro IV and V) heavy-
Directive 2005/55/EC
A
X
X
X
X
X
duty vehicles (shall be repealed with
effect from 31 st Dec 2013)
Emissions (Euro VI) heavy duty
Regulation (EC) No
41a
vehicles/access to information
X
X
X
X
X
X
595/2009
(shall apply from 31Dec 2013)
Directive
Lateral protection
X
X
X
X
89/297/EEC
X
X
X
Directive
Spray suppression systems
X
X
X
X
(13)
(13)
(13)
91/226/EEC
Masses and dimensions (cars)
Directive 92/21/EEC
X
N/
N/
N/
N/
N/
Safety glazing
Directive 92/22/EEC
N/A
N/A
N/A
N/A
N/A
A
A
A
A
A
B
Item
Subject
Regulatory act reference
Tyres
Directive 92/23/EEC
A
A
A
A
A
A
A
A
A
A
Speed limitation devices
Directive 92/24/EEC
X
X
X
X
Directive 97/27/EC
X
X
X
X
X
X
X
X
X
Masses and dimensions (other than
vehicles referred to in item 44)
Directive
External projections of cabs
A
A
A
92/114/EEC
Couplings
Directive 94/20/EC
X
X
X
X
X
X
X
X
X
X
Flammability
Directive 95/28/EC
X
Buses and coaches
Directive 2001/85/EC
A
A
N/
Front impact
Directive 96/79/EC
A
N/
N/
Side impact
Directive 96/27/EC
A
A
Directive 98/91/EC
X
X
X
X
X
X
X
Vehicles intended for the transport
( 1 )
( 1 )
( 1 )
( 1 )
( 1 )
( 1 )
( 1 )
of dangerous goods
Front under-run protection
Directive 2000/40/EC
X
X
Regulation (EC) No
N/
N/
Pedestrian protection
78/2009
A
A
N/
N/
Recyclability
Directive 2005/64/EC
A
A
Air-conditioning system
Directive 2006/40/EC
X
Z
Regulation (EC)
Hydrogen System
No79/2009
A
A
A
A
A
A
Regulation (EC) No
P/A
P/A
P/A
P/A
P/A
General Safety
661/2009
P/A
P/A
P/A
P/A
P/A
( ) The requirements of Directive 98/91/EC are only applicable when the manufacturer applies for the EC type-approval of a vehicle intended for the transport of
dangerous goods.
B
Appendix 3
Wheelchair accessible vehicles
Item
Subject
Regulatory act reference
Permissible sound level
X
Directive 70/157/EEC
Emissions
G + W 1
Directive 70/220/EEC
2a
G + W 1
Emissions (Euro 5 and 6) light-duty
Regulation (EC) No 715/2007
vehicles/ access to information
Fuel tanks/rear protective devices
X + W 2
Directive 70/221/EEC
Rear registration plate space
X
Directive 70/222/EEC
Steering effort
X
Directive 70/311/EEC
Door latches and hinges
X
Directive 70/387/EEC
Audible warning
X
Directive 70/388/EEC
Indirect vision devices
X
Directive 2003/97/EEC
Braking
X
Directive 71/320/EEC
X
Radio interference (electromagnetic com-
Directive 72/245/EEC
patibility)
Diesel smoke
X
Directive 72/306/EEC
Interior fittings
X
Directive 74/60/EEC
Anti-theft and immobiliser
X
Directive 74/61/EEC
Protective steering
X
Directive 74/297/EEC
Seat strength
X + W 3
Directive 74/408/EEC
Exterior projection
X + W 4
Directive 74/483/EEC
Speedometer and reverse gear
X
Directive 75/443/EEC
Plates (statutory)
X
Directive 76/114/EEC
Seat-belt anchorages
X + W 5
Directive 76/115/EEC
B
Item
Subject
Regulatory act reference
X
Installation of lighting and light signalling
Directive 76/756/EEC
devices
Reflex reflectors
X
Directive 76/757/EEC
X
End-outline, front position (side), rear-
position (side), stop, side marker, daytime
Directive 76/758/EEC
running lamps
Direction indicators
X
Directive 76/759/EEC
Rear registration plate lamps
X
Directive 76/760/EEC
Headlamps (including bulbs)
X
Directive 76/761/EEC
Front fog lamps
X
Directive 76/762/EEC
Towing hooks
X
Directive 77/389/EEC
Rear fog lamps
X
Directive 77/538/EEC
Reversing lamps
X
Directive 77/539/EEC
Parking lamps
X
Directive 77/540/EEC
Seat-belts and restraint systems
X + W 6
Directive 77/541/EEC
Forward vision
X
Directive 77/649/EEC
X
Identification of controls, tell-tales and
Directive 78/316/EEC
indicators
Defrost/demist
X
Directive 78/317/EEC
Wash/wipe
X
Directive 78/318/EEC
Heating systems
X
Directive 2001/56/EC
Wheel guards
X
Directive 78/549/EEC
CO 2 emissions/fuel consumption
X + W 7
Directive 80/1268/EEC
Engine power
X
(shall be repealed with effect from 31 st Dec 2013)
Directive 80/1269/EEC
Diesel emissions
X
(shall be repealed with effect from 31 st Dec 2013)
Directive 2005/55/EC
41a
Emissions (Euro VI) heavy duty
X
vehicles/access to information.
Regulation (EC) No 595/2009
(shall apply from 31 st Dec 2013)
B
Item
Subject
Regulatory act reference
Masses and dimensions(cars)
X + W 8
Directive 92/21/EEC
Safety glazing
X
Directive 92/22/EEC
Tyres
X
Directive 92/23/EEC
Couplings
X
Directive 94/20/EC
Frontal impact
X + W 9
Directive 96/79/EC
Side impact
X + W 10
Directive 96/27/EC
Pedestrian protection
X
Regulation (EC) No 78/2009
Recyclability
N/A
Directive 2005/64/EC
Air-conditioning systems
X
Directive 2006/40/EC
Hydrogen system
X
Regulation (EC) No 79/2009
General Safety
P/A
Regulation (EC) No 661/2009
B
Appendix 4
Other special purpose vehicles (including trailer caravans)
Application of the exemptions is only permitted if the manufacturer demonstrates to the satisfaction of the approval authority that the vehicle, due to
the special function, cannot meet all the requirements.
Item
Subject
Regulatory act reference
Permissible sound level
H
H
H
H
H
Directive 70/157/EEC
Emissions
Q
Q
Q
Q
Q
Directive 70/220/EEC
2a
Q
Q
Q
Emissions (Euro 5 and 6) light-duty
Regulation (EC) No
vehicles/access to information
715/2007
Fuel tanks/rear protective devices
F
F
F
F
F
X
X
X
X
Directive 70/221/EEC
Rear registration plate space
A +
A +
A +
A +
A +
A +
A +
A +
A +
R
R
R
R
R
R
R
R
R
Directive 70/222/EEC
Steering effort
X
X
X
X
X
X
X
X
X
Directive 70/311/EEC
Door latches and hinges
B
B
B
Directive 70/387/EEC
Audible warning
X
X
X
X
X
Directive 70/388/EEC
Indirect vision devices
X
X
X
X
X
Directive 2003/97/EC
Braking
X
X
X
X
X
X
X
X
X
Directive 71/320/EEC
X
X
X
X
X
X
X
X
X
Radio interference (electromagnetic
Directive 72/245/EEC
compatibility)
Diesel smoke
H
H
H
H
H
Directive 72/306/EEC
Anti-theft and immobiliser
X
X
X
X
X
Directive 74/61/EEC
Protective steering
X
Directive 74/297/EEC
Seat strength
D
D
D
D
D
Directive 74/408/EEC
Speedometer and reverse gear
X
X
X
X
X
Directive 75/443/EEC
Plates (statutory)
X
X
X
X
X
X
X
X
X
Directive 76/114/EEC
Seat-belt anchorages
D
D
D
D
D
Directive 76/115/EEC
A +
A +
A +
A +
A +
A +
A +
A +
A +
Installation of lighting and light signal-
N
N
N
N
N
N
N
N
N
Directive 76/756/EEC
ling devices
B
Item
Subject
Regulatory act reference
Retro reflectors
X
X
X
X
X
X
X
X
X
Directive 76/757/EEC
X
X
X
X
X
X
X
X
X
End-outline, front-side, rear-side, stop,
Directive 76/758/EEC
day time running, side-marker lamps
Direction indicators
X
X
X
X
X
X
X
X
X
Directive 76/759/EEC
Rear registration plate lamps
X
X
X
X
X
X
X
X
X
Directive 76/760/EEC
Headlamps (including bulbs)
X
X
X
X
X
Directive 76/761/EEC
Front fog lamps
X
X
X
X
X
Directive 76/762/EEC
Towing hooks
A
A
A
A
A
Directive 77/389/EEC
Rear fog lamps
X
X
X
X
X
X
X
X
X
Directive 77/538/EEC
Reversing lamps
X
X
X
X
X
X
X
X
X
Directive 77/539/EEC
Parking lamps
X
X
X
X
X
Directive 77/540/EEC
Seat-belts and restraint systems
D
D
D
D
D
Directive 77/541/EEC
X
X
X
X
X
Identification of controls, tell-tales and
Directive 78/316/EEC
indicators
Defrost/demist
O
O
O
O
O
Directive 78/317/EEC
Wash/wipe
O
O
O
O
O
Directive 78/318/EEC
Heating systems
X
X
X
X
X
X
X
X
X
Directive 2001/56/EC
Engine power
X
X
X
X
X
(shall be repealed with effect from 31 st Dec
Directive 80/1269/EEC
2013)
Emissions (Euro IV and V) heavy-duty
H
H
H
H
H
vehicles
Directive 2005/55/EC
st
(shall be repealed with effect from 31 Dec
2013)
41a
Emissions (Euro VI) heavy duty
H
H
H
H
H
Regulation (EC) No
vehicles/access to information
595/2009
Lateral protection
X
X
X
X
Directive 89/297/EEC
Spray suppression systems
X
X
X
X
X
X
X
Directive 91/226/EEC
(13)
(13)
(13)
Safety glazing
J
J
J
J
J
J
J
J
J
Directive 92/22/EEC
Tyres
X
X
X
X
X
X
X
X
X
Directive 92/23/EEC
Speed limitation devices
X
X
X
X
Directive 92/24/EEC
B
Item
Subject
Regulatory act reference
Masses and dimensions
X
X
X
X
X
X
X
X
X
Directive 97/27/EC
External projections of cabs
X
X
X
Directive 92/114/EEC
Couplings
X
X
X
X
X
X
X
X
X
Directive 94/20/EC
Flammability
X
Directive 95/28/EC
Buses and coaches
X
X
Directive 2001/85/EC
Side impact
A
Directive 96/27/EC
X
X
X
X
X
X
Vehicles intended for the transport of
Directive 98/91/EC
dangerous goods
Front under-run protection
X
X
Directive 2000/40/EC
Pedestrian protection
N/A
Regulation (EC) No
(*)
78/2009
Recyclability
N/A
Directive 2005/64/EC
Air-conditioning system
Z
Directive 2006/40/EC
Hydrogen system
Q
Q
Q
Q
Q
Regulation (EC) No
79/2009
General Safety
P/A
P/A
P/A
P/A
P/A
P/A
P/A
P/A
P/A
Regulation (EC) No
661/2009
B
Appendix 5
Mobile cranes
Item
Subject
Regulatory act reference
Mobile crane of category N 3
Permissible sound level
T
Directive 70/157/EEC
Emissions
X
Directive 70/220/EEC
2a
N/A
Emissions (Euro 5 and 6) light-duty
Regulation (EC) No 715/2007
vehicles/ access to information
Fuel tanks/rear protective devices
X
Directive 70/221/EEC
Rear registration plate space
X
Directive 70/222/EEC
Steering effort
X crab steering allowed
Directive 70/311/EEC
Door latches and hinges
A
Directive 70/387/EEC
Audible warning
X
Directive 70/388/EEC
Indirect vision devices
X
Directive 2003/97/EC
Braking
U
Directive 71/320/EEC
X
Radio interference (electromagnetic com-
Directive 72/245/EEC
patibility)
Diesel smoke
X
Directive 72/306/EEC
Interior fittings
X
Directive 74/60/EEC
Anti-theft and immobiliser
X
Directive 74/61/EEC
Seat strength
D
Directive 74/408/EEC
Speedometer and reverse gear
X
Directive 75/443/EEC
Plates (statutory)
X
Directive 76/114/EEC
Seat-belt anchorages
D
Directive 76/115/EEC
A + Y
Installation of lighting and light signalling
Directive 76/756/EEC
devices
Reflex reflectors
X
Directive 76/757/EEC
B
Item
Subject
Regulatory act reference
Mobile crane of category N 3
X
End-outline, front position (side), rear-
position (side), stop, side marker, daytime
Directive 76/758/EEC
running lamps
Direction indicators
X
Directive 76/759/EEC
Rear registration plate lamps
X
Directive 76/760/EEC
Headlamps (including bulbs)
X
Directive 76/761/EEC
Front fog lamps
X
Directive 76/762/EEC
Towing hooks
A
Directive 77/389/EEC
Rear fog lamps
X
Directive 77/538/EEC
Reversing lamps
X
Directive 77/539/EEC
Parking lamps
X
Directive 77/540/EEC
Seat-belts and restraint systems
D
Directive 77/541/EEC
X
Identification of controls, tell-tales and
Directive 78/316/EEC
indicators
Defrost/demist
O
Directive 78/317/EEC
Wash/wipe
O
Directive 78/318/EEC
Heating systems
X
Directive 2001/56/EC
Engine power
X
(shall be repealed as from 31 st Dec 2013)
Directive 80/1269/EEC
V
Emissions (Euro IV and V) — heavy-duty
vehicles
Directive 2005/55/EC
(shall be repealed as from 31 st Dec 2013)
41a
Emissions (Euro VI) heavy duty
V
Regulation (EC) No 595 of
vehicles/access to information
Lateral protection
X
Directive 89/297/EEC
Spray-suppression systems
X
Directive 91/226/EEC
Safety glazing
J
Directive 92/22/EEC
Tyres
Directive 92/23/EEC
A (provided that the
requirements in ISO 10571-
1995 (tyres for mobile cranes
and similar specialised
machines) or ETRTO
Standards Manual are
fulfilled.
B
Item
Subject
Regulatory act reference
Mobile crane of category N 3
Speed limitation devices
X
Directive 92/24/EEC
Masses and dimensions
X
Directive 97/27/EC
External projections of cabs
X
Directive 92/114/EEC
Couplings
X
Directive 94/20/EC
Front under-run protection
X
Directive 2000/40/EC
Hydrogen System
X
Regulation (EC) No79/2009
General Safety
P/A
Regulation (EC) No 661/2009
Meaning of letters
No exemptions except those specified in the regulatory act.
This regulatory act is not applicable to this vehicle (no requirements).
Any frontal protection system supplied with the vehicle shall comply with the requirements of Regulation (EC) No
78/2009, shall be provided with a type- approval number and shall be marked accordingly
Exemption permitted where special purposes make it impossible to fully comply. The manufacturer shall
demonstrate this to the satisfaction of the type-approval authority that the vehicle cannot meet the requirements due
to its special purpose.
Application limited to doors giving access to the seats designated for normal use when the vehicle is travelling on
the road and where the distance between the R point of the seat and the average plane of the door surface,
measured perpendicular to the longitudinal medium plane of the vehicle, does not exceed 500 mm.
Application limited to that part of the vehicle in front of the rearmost seat designated for normal use when the
vehicle is travelling on the road and also limited to the head impact zone as defined in Directive 74/60/EEC.
Application limited to seats designated for normal use when the vehicle is travelling on the road. Seats which are
not designated for use when the vehicle is travelling on the road shall be clearly identified to users either by means
of a pictogram or a sign with an appropriate text.
Front only.
Modification to the routing and length of the refuelling duct and re-positioning of the tank inboard is permissible.
Requirements according to the category of the base/incomplete vehicle (the chassis of which was used to build the
special purpose vehicle). In the case of incomplete/completed vehicles, it is acceptable that the requirements for
vehicles of the corresponding category N (based on max. mass) are satisfied.
Modification of exhaust system length after the last silencer not exceeding 2 m is permissible without any further
test.
For all window glazing other than driver's cab glazing (windshield and side glasses), the material may be either of
safety glass or rigid plastic glazing.
Additional panic alarm devices permitted.
Application limited to seats designated for normal use when the vehicle is travelling on the road. At least
anchorages for lap belts are required in the rear seating positions. Seats which are designated for use when the
vehicle is travelling on the road shall be clearly identified to users either by means of a pictogram or a sign with an
appropriate text.
Application limited to seats designated for normal use when the vehicle is travelling on the road. At least lap belts
are required in all rear seating positions. Seats which are not designated for use when the vehicle is travelling on
the road shall be clearly identified to users either by means of a pictogram or a sign with an appropriate text.
Provided that all mandatory lighting devices are installed and that the geometric visibility is not affected.
The vehicle shall be fitted with an adequate system in the front.
Modification of exhaust system length after the last silencer not exceeding 2 m is permissible without any further
test. An EC type-approval issued to the most representative base vehicle remains valid irrespective of change in the
reference weight.
Provided that the registration plates of all Member States can be mounted and remain visible.
The light transmission factor is at least 60 %, also
the
“A” pillar obstruction angle is not more than 10 o .
Test to be performed only with the complete/completed vehicle. The vehicle can be tested according to
Directive 70/
157/EEC as last amended by 1999/101/EC. Concerning item 5.2.2.1 of Annex I to Directive 70/157/EEC the
following limit values are applicable
(a) 81 dB(A) for vehicles with an engine power of less than 75 kW;
(b) 83 dB(A) for vehicles with an engine power of not less than 75 kW but less than 150 kW;
(c) 84 dB(A) for vehicles with an engine power of not less than 150 kW.
Test to be performed only with the complete/completed vehicle. Vehicles up to 4 axles shall comply with all
the requirements laid down by Directive 71/320/EEC. Derogations are admitted for vehicles having more than
4 axles, provided that
they are justified by the particular construction all the braking performances, related to parking, service and
secondary braking laid down by Directive 71/320/EEC are fulfilled.
The compliance with Directive 97/68/EC can be accepted.
Requirements shall be complied with, but modification in the exhaust system is permitted without any further
test provided the emission control devices including particulate filters (if any) are not affected. No new
evaporative test shall be required on the modified vehicle on condition that the evaporative control devices are
kept as fitted by the manufacturer of the base vehicle.
An EC type approval issued to the most representative base vehicle remains valid irrespective of change in the
reference mass.
Requirements shall be complied with, but modification of the routing, length of the refuelling duct, fuel hoses
and fuel vapour pipes is permitted. Re-location of the original fuel tank is permitted.
A wheelchair location is considered as a seating position. For each wheelchair sufficient space shall be
provided. The longitudinal plane of the special area shall be parallel to the longitudinal plane of the vehicle.
Appropriate information shall be made available to the vehicle owner that a wheelchair used as a seat in the
vehicle shall be capable of withstanding the forces transmitted by the tie-down mechanism during the various
driving conditions.
Appropriate adaptations may be made to the seats of the vehicle provided that their anchorages, mechanisms
and head restraints guarantee the same level of performance provided for in the Directive.
Compliance with Directive shall be required for the boarding aids when in the resting position.
Each wheelchair location shall be fitted with an integrated restraint system which consists of a restraint system
for the wheelchair and a restraint system for the wheelchair user.
Anchorages for restraint systems shall resist forces as prescribed in Directive 76/115/EEC and in Standard ISO
105421: 2001.
Webbings and hardware intended to secure the wheelchair (tie-down mechanisms) shall meet the requirements
of Directive 77/541/EEC and of the relevant part of Standard ISO 10542.
Tests shall be performed by the technical service which has been appointed for testing and checking in
accordance with the Directives referred to above. The criteria are those included in these Directives. Tests shall
be performed with the surrogate wheelchair described in Standard ISO 10542.
When, due to the conversion, anchorage points for the safety belts need to be moved outside the tolerance
provided
for in point 2.7.8.1 of Annex I to Directive 77/541/EEC, the technical service shall check whether the alteration
constitutes a worst case or not. If that is the case, the test provided for in Annex VII to Directive 77/541/EEC
shall be performed. Extension to the EC type-approval does not need to be issued.
A new measurement relating to CO 2 emissions does not need to be performed when, in application of the
provisions under W 1 , no fresh tests have to be performed with regard to tail pipe emissions.
For the purposes of calculations, the mass of the wheelchair including the user shall be assumed to be 100 kg.
The mass shall be concentrated at the H point of the three-dimensional machine.
The technical service shall also consider the possibility to use electric wheelchair(s), the mass of which,
including the user, is assumed to be 250 kg. Any limitation in the passenger capacity resulting from the use of
electric wheelchair(s) shall be recorded in the type-approval certificate and an appropriate language thereto
shall be included in the certificate of conformity.
No new test shall be required on the modified vehicle on condition that the front part of the chassis located in
front of
the R point of the driver is not affected by the conversion of the vehicle and no part of the supplementary
restraint system (air-bag(s)) has been removed or deactivated.
No new test shall be required on the modified vehicle on condition that the side reinforcements have not been
altered and no part of the supplementary restraint system (side air-bag(s)) has been removed or deactivated.
Provided that all mandatory lighting devices are installed.
Only for vehicles of category N 1 , class I as described in the first table in point 5.3.1.4 of Annex I to Directive
70/220/
EEC.’
This regulatory act is partially applicable. The precise scope of application is established in the implementing
measures of this Regulation.
Applicable as from 9 April 2010. Directive 91/226/EEC is not mandatory to Off-road vehicles.”.
B
8. For Schedule XV to the principal regulations, there shall
Substitutes Schedule
XV to the principal
be substituted the following:-
regulations.
“SCHEDULE XV
REGULATORY ACTS FOR WHICH A MANUFACTURER MAY BE DESIGNATED AS TECHNICAL SERVICE
0. Objectives and scope
0.1. This Annex lays down the list of the regulatory acts for which a manufacturer may be designated as technical
service in accordance with Article 41(6).
0.2. It also includes appropriate provisions concerning the designation of a manufacturer as technical service, to be
applied in the framework of the type-approval of vehicles, components and separate technical units concerned by
Part I of Schedule IV.
0.3. However it does not apply to manufacturers which apply for small series approval in accordance with Article 22.
1. Appointment of a manufacturer as technical service
1.1. A manufacturer appointed as technical service is a manufacturer who has been designated by the approval authority
as a testing laboratory to carry out approval tests on its behalf in the meaning of point 31 of Article 3.
In accordance with Article 41(6), a manufacturer may only be designated as technical service for category A
activities.
1.2. The expression “to carry out test” is not restricted to the measurement of performances but covers also the regis-
tration of test results and the submission of a report to the approval authority including the relevant conclusions.
It covers the checking of compliance with those provisions which do not necessarily require measurement. This is
the case for the assessment of the design against legislative requirements.
For example, “check compliance of the location of the fuel tank in a vehicle with the provisions of point 5.10 of
Annex I to Directive 70/221/EEC” has to be understood as part of “to carry out test”.
2. List of regulatory acts and restrictions
Regulatory act reference
Subject
Directive 70/222/EEC
Rear registration plate space
4. Directive 70/388/EEC
Audible warning
7.
18. Directive 76/114/EEC
Plates (statutory)
20. Directive 76/756/EEC
Installation of lighting and light signalling devices
Directive 77/389/EEC
Towing hooks
27.
33. Directive 78/316/EEC
Identification of controls, tell-tales and indicators
34. Directive 78/317/EEC
Defrost/demist
35. Directive 78/318/EEC
Wash/wipe
Directive 2001/56/EC
Heating systems Except the provisions in Annex VIII relating to installation
36. requirements of LPG heating systems in vehicle.
Annex I to Directive 70/221/EEC” has to be understood as part of “to carry out test”.
2. List of regulatory acts and restrictions
Regulatory act reference
Subject
Directive 70/222/EEC
Rear registration plate space
4. Directive 70/388/EEC
Audible warning
7.
18. Directive 76/114/EEC
Plates (statutory)
20. Directive 76/756/EEC
Installation of lighting and light signalling devices
Directive 77/389/EEC
Towing hooks
27.
33. Directive 78/316/EEC
Identification of controls, tell-tales and indicators
34. Directive 78/317/EEC
Defrost/demist
35. Directive 78/318/EEC
Wash/wipe
Directive 2001/56/EC
Heating systems Except the provisions in Annex VIII relating to installation
36. requirements of LPG heating systems in vehicle.
37. Directive 78/549/EEC
Wheel guards
Regulatory act reference
Subject
Directive 92/21/EEC
Masses and dimensions (cars)
44.
45. Directive 92/22/EEC
Safety glazing Restricted to the provisions included in Annex 21 to UNECE
Regulation 43.
46. Directive 92/23/EEC
Tyres
48. Directive 97/27/EC
Masses and dimensions (other than vehicles referred to in item 44)
49. Directive 92/114/EEC
External projections of cabs
50. Directive 94/20/EC
Couplings Restricted to the provisions included in Schedule V (up to and including
Section 8) and VII.
61. Directive 2006/40/EC
Air-conditioning system
B
Appendix
Designation of a manufacturer as technical service
1. General
1.1. The designation and notification of a manufacturer as technical service shall be made in accordance with the
provisions of Articles 41, 42 and 43 as well with the practical measures included in this Appendix.
1.2. The manufacturer shall be accredited under Standard EN ISO/IEC 17025:2005 — General requirements for the
competence of testing and calibration laboratories.
2. Subcontracting
2.1. In accordance with the provisions of Article 41(6) first subparagraph, a manufacturer may nominate a subcontractor
for performing tests on his behalf.
By subcontractor it shall be understood
a) either a subsidiary which is entrusted with testing activities by the manufacturer inside its own organisation; or
b) a third party under contract with the manufacturer to perform test activities.
2.2. Turning to the services of a subcontractor does not remove the obligation for the manufacturer to comply with the
provisions of Article 41 in particular those concerning the skills of the technical services and compliance with Standard
EN ISO/IEC 17025:2005.
2.3. Section 1 of Schedule XV shall apply to the subcontractor.
3. Test report
Test reports shall be drafted in accordance with the general requirements set out in Appendix 3 of Schedule V to
Directive 2007/46/EC.”.
9. For Schedule XVI to the principal regulations, there shall
Substitutes Schedule
XVI to the principal
be substituted the following:-
regulations.
B
“SCHEDULE XVI
SPECIFIC CONDITIONS REQUIRED FROM VIRTUAL TESTING METHODS AND REGULATORY ACTS FOR
WHICH VIRTUAL TESTING METHODS MAY BE USED BY A MANUFACTURER OR A TECHNICAL SERVICE
0. Objectives and scope
This Schedule lays down appropriate provisions concerning virtual testing in accordance with Article 11(3).
It shall not apply to the second subparagraph of Article 11(2).
1. List of regulatory acts No
Regulatory act reference
Subject
3. Directive 70/221/EEC
Fuel tanks/rear protective devices
6. Directive 70/387/EEC
Door latches and hinges
8. Directive 2003/97/EC
Indirect vision devices
12. Directive 74/60/EEC
Interior fittings
16. Directive 74/483/EEC
Exterior projections
20. Directive 76/756/EEC
Installation of lighting and light signalling devices
27. Directive 77/389/EEC
Towing hooks
32. Directive 77/649/EEC
Forward vision
35. Directive 78/318/EEC
Wash/wipe
Directive 78/549/EEC
Wheel guards
37.
42. Directive 89/297/EEC
Lateral protection
49. Directive 92/114/EEC
External projections of cabs
50. Directive 94/20/EC
Couplings
52. Directive 2001/85/EC
Buses and coaches
57. Directive 2000/40/EC
Front underrun protection
B
Appendix 1
General conditions required from virtual testing methods
1. Virtual test pattern
The following scheme shall be used as basis structure for describing and conducting virtual testing
(a) purpose;
(b) structure model;
(c) boundary conditions;
(d) load assumptions;
(e) calculation;
(f) assessment;
(g) documentation.
2. Fundamentals of computer simulation and calculation
2.1. Mathematical model
The mathematical model shall be supplied by the manufacturer. It shall reflect the complexity of the structure of
the vehicle, system and components to be tested in relation to the requirements of the regulatory act and its
boundary conditions.
The same provisions shall apply mutatis mutandis for testing components or technical units independently from the
vehicle.
2.2. Validation process of the mathematical model
The mathematical model shall be validated in comparison with the actual test conditions.
To that effect a physical test shall be conducted for the purposes of comparing the results obtained when using the
mathematical model with the results of a physical test. Comparability of the test results shall be proven. A
validation report shall be drafted by the manufacturer or by the technical service and submitted to the approval
authority.
Any change made to the mathematical model or to the software likely to invalidate the validation report shall be
brought to the attention of the approval authority which may require that a new validation process is conducted.
The flow chart of the validation process is shown in Appendix 3.
2.3. Documentation
The data and auxiliary tools used for the simulation and calculation shall be made available by the manufacturer
and be documented in a suitable way.
3. Tools and support
At the request of the technical service, the manufacturer shall supply or provide access to the necessary tools
including appropriate software.
In addition he shall provide appropriate support to the technical service.
Providing access and support to a technical service does not remove any obligation of the technical service
regarding the skills of its personnel, the payment of licence rights and respect of confidentiality.
B
Appendix 2
Specific conditions concerning virtual testing methods
1. List of regulatory acts
Regulatory act reference
Annex and paragraph
Specific conditions
3. Directive 70/221/EEC
Annex II (Rear underrun protection)
Point 5.4.5.
6. Directive 70/387/EEC
Annex II Point 4.3.
8. Directive 2003/97/EC
Annex III
Prescribed fields of vision of rear-view
All provisions in Sections 3, 4 and 5.
mirrors.
12. Directive 74/60/EEC
Annex I All provisions in Section 5
Measurement of all radii of curvature and of all
(Specifications).
projections except for those requirements where a
force has to be applied in order to check
compliance with the provisions.
Annex II
Determination of the head-impact zone.
16. Directive 74/483/EEC
Annex I
Measurement of all radii of curvature and of all
All provisions in Section 5 (General
projections except for those requirements where
specifications) and Section 6 (Particular
a force has to be applied in order to check
specifications).
compliance with the provisions.
20. Directive 76/756/EEC
Section 6 (Individual specifications) of
The test drive provided for in Point 6.22.9.2.2
UNECE Regulation No 48.
shall be performed on a real vehicle.
Provisions of Annexes 4, 5 and 6 to UNECE
Regulation No 48.
27. Directive 77/389/EEC
Annex II, Section 2
32. Directive 77/649/EEC
Section 5 (Specifications) of Annex I.
35. Directive 78/318/EEC
Annex I
Point 5.1.2. Measurement of the swept
area only.
37. Directive 78/549/EEC
Section 2 (Special requirements) of Annex I
42. Directive 89/297/EEC
Annex I Point 2.8.
Resistance under a horizontal force and
deflection measurement.
49. Directive 92/114/EEC
Annex I All provisions in Section 4 (Specific
Measurement of all radii of curvature and of all
requirements). Regarding N 1 vehicles, the
projections except for those requirements where a
provisions referred to in item 16 of this
force has to be applied in order to check compliance
Appendix shall apply.
with the provisions.
B
Specific conditions
Regulatory act
Annex and paragraph
reference
50. Directive 94/20/EC
Annex V “Requirements for
All provisions of Sections 1 to 8 included.
mechanical coupling Devices”
Strength tests on mechanicals couplings of simple
Annex VI Point 1.1.
design may be replaced by virtual tests.
Section 4 of Annex VI “Testing
Points 4.5.1. (Strength test), 4.5.2. (Resistance to
of mechanical coupling devices”
buckling) and 4.5.3. (Resistance to bending
moment) only.
52. Directive 2001/85/EC
Annex I
Point 7.4.5. Stability test under the conditions
specified in the Appendix to Annex I.
Annex IV Strength of superstructure
Appendix 4 — Verification of strength of
the superstructure by calculation.
57. Directive 2000/40/EC
Section 3 of Annex 5 to UNECE
Resistance under a horizontal force and
Regulation 93.
deflection measurement.
B
Appendix 3
Validation process
”.
B
10. For Schedule XXI to the principal regulations, there
Substitutes Schedule
XXI to the principal
shall be substituted the following:-
regulations.
“SCHEDULE XXI
LIST OF SEPARATE DIRECTIVES/REGULATIONS AND THEIR AMENDMENTS WHICH ARE
ADOPTED.
National Requirements relevant to the particular Directive
None
None
None
None
None
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
The effective
The effective
The effective
The effective
May 2004).
(Where the
Adoption
Date of
date
date
date
date
date
date
date
date
23.02.1970
22.11.1973
12.03.1977
26.07.1984
06.09.1984
11.07.1987
15.08.1989
L 66; p.33
L 371; p.1
L 131, p.6
18/05/198
reference/
L 42 p.16
Official
Journal
L 192;
L 238;
L 321,
L 196,
L 238,
Page
p.33
p.47
p.31
p.43
p43
73/350/EEC
77/212/EEC
81/334/EEC
84/372/EEC
84/424/EEC
87/354/EEC
89/491/EEC
92/97/EEC
Amending
Directive
No.
permissible sound level
February 6 1970 on the
and the exhaust system
Title of Base Directive
approximation of the
Council Directive of
states relating to the
laws of the member
of motor vehicles.
70/157/EE
Directive
Base
no.
C
National Requirements relevant to the particular Directive
None
None
None
None
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
The effective
6 th July 2008
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
date
19.12.1992
13.04.1996
28.12.1999
20.12.2006
06.04.1970
15.06.1974
03.02.1977
L 92; p.23
L 32; p.32
15.6.2007
reference/
L 76, p.1
Official
Journal
L. 363;
L. 155;
L 334;
L 159;
L 223;
Page
p.41
p.81
p.49
p.61
74/290/EEC
77/102/EEC
78/665/EEC
2006/96/EC
2007/34/EC
1999/101/E
Amending
96/20/EC
Directive
No.
C
against air pollution by
Title of Base Directive
March 20 1970 on the
approximation of the
measures to be taken
Council Directive of
gases from positive-
laws of the member
ignition engines of
states relating to
motor vehicles
70/220/EE
Directive
Base
no.
C
National Requirements relevant to the particular Directive
None
None
None
None
None
None
None
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
The effective
The effective
The effective
The effective
The effective
The effective
May 2004).
(Where the
Adoption
Date of
date
date
date
date
date
date
date
date
date
date
date
14.08.1978
20.07.1983
09.02.1988
06.08.1988
03.08.1989
15.08.1989
30.08.1991
28.07.1993
19.04.1994
20.08.1996
01.11.1996
L 197; p.1
L 214; p.1
L 226; p.1
L 242; p.1
reference/
L 36; p.1
Official
Journal
L 238;
L 186;
L 100;
L 282;
L 286;
L210;
Page
p.48
p.43
p.21
p.42
p.25
p.64
83/351/EEC
88/436/EEC
89/458/EEC
89/491/EEC
91/441/EEC
88/76/EEC
93/59/EEC
Amending
94/12/EC
96/44/EC
96/69/EC
98/77/EC
Directive
No.
Title of Base Directive
Directive
Base
no.
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
The effective
4 September
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
date
23.10.1998
28.12.1998
28.12.1999
06.02.2001
18.01.2002
20.12.2006
06.04.1970
L 350; p.1
L 35; p.34
L 16; p.34
L 76, p.23
reference/
Official
Journal
L. 363;
L 334;
L 291;
L 206;
Page
p.34
p.43
p.20
p.29
p.81
2002/80/EC
2003/76/EC
2006/96/EC
1999/102/E
2001/100/E
2001/1/EC
Amending
98/69/EC
Directive
No.
C
C
tanks and rear underrun
Title of Base Directive
March 20, 1970 on the
approximation of the
states relating to fuel
Council Directive of
laws of the member
projection of motor
vehicles and their
trailers.
70/221/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
None
None
None
11 March 2007
shall mean 1st
effective date
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
26.05.1979
16.05.1997
03.05.2000
20.12.2006
06.04.1970
L 131; p.4
L 125; p.1
L 106; p.7
L 76; p.25
18/05/198
18.2.2006
reference/
L48, p.16
Official
Journal
L. 363;
L 128;
Page
p.22
p.81
79/490/EEC
81/333/EEC
2006/20/EC
2006/96/EC
2000/8/EC
Amending
97/19/EC
Directive
No.
space for mounting and
Title of Base Directive
March 20, 1970 on the
registration plates on
approximation of the
Council Directive of
states relating to the
laws of the member
motor vehicles and
fixing of rear
their trailers.
70/222/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
The effective
May 2004).
(Where the
Adoption
Date of
date
date
date
date
date
date
18.06.1970
18.07.1992
13.02.1999
10.08.1970
31.12.1982
12.12.1998
L 40, p.36
L 176, p.5
reference/
Official
Journal
L 337;
L 133,
L 199,
L 378,
Page
p.10
p.33
p.29
82/890/EEC
92/62/EEC
98/90/EEC
1999/7/EC
Amending
Directive
No.
doors of motor vehicles
Title of Base Directive
steering equipment for
approximation of the
approximation of the
Council Directive of
Council Directive of
July 27, 1970 on the
states relating to the
states relating to the
laws of the member
laws of the member
motor vehicles and
June 8 1970 on the
and their trailers.
their trailers.
70/311/EE
70/387/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
Directive 2003/97/EC shall repeal 71/127/EEC as from
24th January 2010.
November 2014.
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
12.05.2001
10.08.1970
11.07.1987
20.12.2006
22.03.1971
reference/
L 68, p.1
Official
Journal
L. 363;
L 130,
L 176,
L 192,
Page
p.33
p.12
p.43
p.81
87/354/EEC
2001/31/EC
2006/96/EC
Amending
Directive
No.
Title of Base Directive
March 1, 1971 on the
approximation of the
approximation of the
Council Directive of
Council Directive of
July 27, 1970 on the
states relating to the
laws of the member
laws of the member
devices for motor
states relating to
audible warning
vehicles.
70/388/EE
71/127/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
none
none
none
none
none
With respect to
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
regulations –
May 2004).
1st January
(Where the
Adoption
Date of
these
date
date
date
date
date
22.09.1979
29.03.1985
22.11.1986
11.07.1987
14.06.1988
29.01.2004
L 239, p.1
reference/
L 90, p.1
L 25, p.1
Official
Journal
L 327,
L 192,
L 147,
Page
p.49
p.43
p.77
79/795/EEC
85/205/EEC
86/562/EEC
87/354/EEC
88/321/EEC
Amending
Directive
No.
these devices amending
November 2003 on the
approval of devices for
vehicles equipped with
Title of Base Directive
laws of Member states
Directive 70/156/EEC
Directive 2003/97/EC
indirect vision and of
approximation of the
rear-view mirrors of
of the EP and of the
relating to the type-
motor vehicles.
Council of 10
2003/97/E
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
None
None
None
none
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
date
date
20.12.2006
06.09.1971
19.03.1974
08.09.1975
26.05.1979
31.12.1985
09.04.1988
L 236, p.3
L 380, p.1
L 92, p.47
30.3.2005
reference/
L 74, p.7
Official
Journal
L. 363;
L 202,
L 128,
Page
L81,
p.81
p.37
p.12
74/132/EEC
75/524/EEC
79/489/EEC
85/647/EEC
88/194/EEC
2005/27/EC
2006/96/EC
Amending
Directive
No.
and repealing Directive
Title of Base Directive
approximation of the
Council Directive of
July 26, 1971 on the
certain categories of
states relating to the
laws of the member
motor vehicles and
braking devices of
their trailers.
71/127/EEC
71/320/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
None
None
None
None
None
none
1 October 2006
1 January 2006
1 January 2006
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
date
22.08.1991
18.03.1998
04.10.2002
20.12.2006
06.07.1972
15.08.1989
08.11.1995
13.11.2004
L 266, p.1
L194, p.12
L305, p.32
26.7.2005
reference/
L 81, p.1
Official
Journal
L. 363;
L 233,
L 267,
L 152,
L 238,
p.13
Page
p.21
p.23
p.15
p.43
91/422/EEC
89/491/EEC
2002/78/EC
2006/96/EC
2005/49/EC
2005/83/EC
2004/104/E
Amending
98/12/EC
95/54/EC
Directive
No.
C
Title of Base Directive
June 20, 1972 relating
Council Directive of
Compatibility) of
(electromagnetic
interference
to the radio
vehicles.
72/245/EE
Directive
Base
no.
C
National Requirements relevant to the particular Directive
None
None
None
None
None
None
Provisions shall
apply from 2 nd
shall mean 1st
October 2009
effective date
The effective
The effective
The effective
1 July 2006
May 2004).
1st January
(Where the
1 st October
9th March
Adoption
Date of
date
date
date
24.11.2005
20.12.2006
14.03.2009
20.08.1972
15.08.1989
L.70; p.17
L 190, p.1
reference/
L65, p.27
L61, p.25
7.3.2006
16.05.97
Official
Journal
L. 363;
L 238,
L 125,
Page
p.81
p.43
p.21
89/491/EEC
2006/28/EC
2006/96/EC
2009/19/EC
2005/21/EC
Amending
97/20/EC
Directive
No.
against the emission of
Title of Base Directive
August 2, 1972 on the
pollutants from diesel
approximation of the
measures to be taken
Council Directive of
laws of the member
engines for use in
states relating to
vehicles
72/306/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
11.02.1974
29.07.1978
08.04.2000
11.02.1974
29.11.1995
L 87 , p.22
L 38 , p.22
L 286 , p1
reference/
L 38, p.2
8.3.2005
Official
Journal
L. 363;
L 206 ,
Page
p.26
p.81
78/632/EEC
2006/96/EC
95/56/EEC
2000/4/EC
Amending
Directive
No.
the laws of the member
the laws of the member
Title of Base Directive
December 17, 1973 on
December 17, 1973 on
devices to prevent the
the approximation of
the approximation of
Council Directive of
Council Directive of
states relating to the
unauthorized use of
interior fittings of
states relating to
motor vehicles.
motor vehicles
74/60/EE
74/61/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
None
None
shall mean 1st
21 April 2006
effective date
The effective
The effective
The effective
The effective
The effective
May 2004).
(Where the
Adoption
Date of
date
date
date
date
date
20.12.2006
20.06.1974
31.12.1991
12.08.1974
29.07.1981
25.07.1996
L 165 p.16
L 366 p.1
L 221 p.1
reference/
Official
Journal
L 209 ,
L 186 ,
L 255,
Page
p.28
p34
91/662/EEC
81/577/EEC
2005/39/EC
Amending
96/37/EC
Directive
No.
behavior of the steering
mechanism in the event
Title of Base Directive
to motor vehicles with
July 22, 1974 relating
approximation of the
their anchorages and
Council Directive of
Council Directive of
states relating to the
laws of the member
June 4, 1974 on the
motor vehicles (the
regard to the seats,
interior fittings of
head restraint.
of an impact)
74/297/EE
74/408/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
None
None
None
5 th April 2008.
shall mean 1st
effective date
The effective
The effective
The effective
The effective
May 2004).
1st January
1st January
(Where the
Adoption
Date of
date
date
date
date
20.12.2006
02.10.1974
26.05.1979
11.07.1987
20.12.2006
26.07.1975
L 128 , p.1
L 192 p.43
L 196 , p.1
L.75; p.21
L266 , p.4
30.9.2005
15.3.2007
reference/
Official
Journal
L. 363;
L. 363;
p.143
Page
p.81
p.81
79/488/EEC
87/354/EEC
2006/96/EC
2006/96/EC
2007/15/EC
Amending
Directive
No.
the laws of the member
September 17, 1974 on
Title of Base Directive
external projections of
the approximation of
approximation of the
June 26, 1975 on the
Council Directive of
Council Directive of
states relating to the
motor vehicles.
74/483/EE
75/443/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
shall mean 1st
effective date
The effective
The effective
The effective
May 2004).
(Where the
Adoption
Date of
date
date
date
05.07.1997
30.01.1976
13.06.1978
reference/
L 24 p.1
Official
Journal
L 155 ,
Page
p.15
p.31
78/507/EEC
Amending
97/39/EC
Directive
No.
speedometer equipment
the laws of the member
location and method of
Title of Base Directive
December 18, 1976 on
inscriptions for motor
the approximation of
Council Directive of
states relating to the
laws of the member
statutory plates and
of motor vehicles.
vehicles and their
trailers, and their
states relating to
attachment.
reverse and
76/114/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
None
None
None
None
shall mean 1st
21 April 2006
effective date
The effective
The effective
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
date
11.07.1987
20.12.2006
30.01.1976
29.07.1981
19.05.1982
06.12.1990
26.07.1996
L 139 , p.9
reference/
L 24 , p.6
Official
Journal
L. 363;
L 192 ,
L 209 ,
L 341 ,
L 187 ,
L255,
p.149
Page
p.43
p.81
p.30
p.14
p.95
82/318/EEC
87/354/EEC
81/575/EEC
90/629/EEC
2006/96/EC
2005/41/EC
Amending
96/38/EC
Directive
No.
Title of Base Directive
December 18, 1975 on
the law of the member
anchorages for motor
the approximation of
Council Directive of
vehicle safety belts.
states relating to
76/115/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
The effective
The effective
The effective
May 2004).
(Where the
Adoption
Date of
date
date
date
date
date
date
date
27.09.1976
25.02.1980
22.04.1982
09.06.1983
12.01.1984
20.04.1989
31.12.1991
L 262 , p.1
L 9 , p.24
30.9.2005
reference/
L 51 , p.8
Official
Journal
L 171 ,
L 109 ,
L 366 ,
L 109,
L 151,
Page
p.31
p.47
p.38
p.17
82/244/EEC
83/276/EEC
80/233/EEC
89/278/EEC
91/663/EEC
Amending
84/8/EEC
97/28/EC
Directive
No.
laws of Member States
Title of Base Directive
installation of lighting
approximation of the
Council Directive of
July 27, 1976 on the
and light signaling
vehicles and their
devices on motor
relating to the
trailers
76/756/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
None
None
shall mean 1st
10 th July 2008
effective date
The effective
The effective
The effective
16 th October
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
30.06.1997
27.09.1976
11.07.1987
30.06.1997
20.12.2006
19.6.2007
25.9.2008
reference/
Official
Journal
L. 363;
L 262 ,
L 192 ,
L 171 ,
L.157,
L.257,
Page
p.14
p.14
p.32
p.43
p.11
p.81
p.1
87/354/EEC
2007/35/EC
2008/89/EC
2006/96/EC
Amending
97/29/EC
Directive
No.
Title of Base Directive
laws of member states
approximation of the
Council Directive of
July 27, 1976 on the
reflectors for motor
vehicles and their
relating to retro-
trailers.
76/757/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
27.09.1976
11.07.1987
12.09.1989
30.06.1997
20.12.2006
reference/
Official
Journal
L. 363;
L 262 ,
L 192 ,
L 265 ,
L 171 ,
L 262 ,
Page
p.54
p.43
p.25
p.81
p.1
87/354/EEC
89/516/EEC
2006/96/EC
Amending
97/30/EC
Directive
No.
marker lamps for motor
running lamps and side
Title of Base Directive
position (side) lamps,
approximation of the
lamps, front position
stop lamps, daytime,
Council Directive of
Council Directive of
July 27, 1976 on the
states relating to the
laws of the member
end-outline marker
vehicles and their
(side) lamps, rear
trailers.
76/758/EE
76/759/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date.
date
date
date
date
27.09.1976
11.07.1987
20.04.1989
12.04.1999
20.12.2006
27.09.1976
reference/
Official
Journal
L. 363;
L 262 ,
L 192 ,
L 109 ,
L 97 ,
Page
p.71
p.43
p.14
p.81
p.85
p25
87/354/EEC
89/277/EEC
1999/15/EC
2006/96/EC
Amending
Directive
No.
registration plate lamps
Title of Base Directive
for motor vehicles and
laws of member states
approximation of the
approximation of the
Council Directive of
July 27, 1976 on the
July 27, 1976 on the
laws of the member
direction indicator
vehicles and their
states relating to
lamps for motor
relating to the
trailers
76/760/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
11.07.1987
30.06.1997
20.12.2006
27.09.1976
11.07.1987
reference/
Official
Journal
L. 363;
L 262 ,
L 192 ,
L 171 ,
L 192 ,
Page
p.43
p.49
p.81
p.96
p.43
87/354/EEC
87/354/EEC
2006/96/EC
Amending
97/31/EC
Directive
No.
beam headlamps and to
States relating to motor
units of motor vehicles
Title of Base Directive
light sources (filament
with function as main
lamps and others) for
approximation of the
use in approval lamp
Council Directive of
July 27, 1976 on the
laws of the Member
beam and/or dipped
vehicle head lamps
and of their trailers
their trailers.
76/761/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
The effective
May 2004).
1st January
1st January
(Where the
Adoption
Date of
date
date
date
date
date
date
12.09.1989
12.04.1999
20.12.2006
27.09.1976
11.07.1987
12.04.1999
20.12.2006
L 97 , p.45
L 97 , p.82
reference/
Official
Journal
L. 363;
L. 363;
L 265 ,
L 192 ,
L 145 ,
L 262,
p.122
Page
p.15
p.81
p.43
p.81
p.41
89/517/EEC
87/354/EEC
1999/17/EC
2006/96/EC
1999/18/EC
2006/96/EC
Amending
Directive
No.
Title of Base Directive
states relating to front
approximation of the
May 17, 1977 on the
Council Directive of
Council Directive of
July 27, 1976 on the
fog lamps for motor
laws of the member
vehicles.
76/762/EE
77/389/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
None
none
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
13.06.1977
11.10.1996
29.08.1977
11.07.1987
12.09.1989
12.04.1999
L 97 ; p.1
reference/
Official
Journal
L 192 ;
L 265 ;
L. 363;
L 258 ,
L 220 ,
Page
p.26
p.66
p.43
p.24
p.81
87/354/EEC
89/518/EEC
1999/14/EC
2006/96/EC
Amending
Directive
96/64EC
No.
vehicle towing-devices.
states relating to motor
Title of Base Directive
approximation of the
approximation of the
states relating to rear
June 28, 1977 on the
Council Directive of
fog lamps for motor
laws of the member
laws of the member
vehicles and their
trailers.
77/538/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
date
20.12.2006
29.08.1977
11.07.1987
30.06.1997
20.12.2006
29.08.1977
11.07.1987
12.04.1999
L 97; p.33
reference/
Official
Journal
L. 363;
L 220 ,
L 220 ,
L 192;
L 192;
L 171;
Page
p.60
p.43
p.81
p.83
p.43
87/354/EEC
87/354/EEC
2006/96/EC
1999/16/EC
Amending
97/32/EC
Directive
No.
laws of reversing lamps
Title of Base Directive
for motor vehicles and
approximation of the
approximation of the
June 28, 1977 on the
June 28, 1977 on the
Council Directive of
Council Directive of
laws of the member
parking lamps for
states relating to
motor vehicles.
their trailers.
77/539/EE
77/540/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
None
None
None
None
None
shall mean 1st
21 April 2006
effective date
The effective
The effective
The effective
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
date
date
20.12.2006
29.08.1977
29.07.1981
19.05.1982
11.07.1987
06.12.1990
17.07.1996
25.02.2000
L 341; p.1
reference/
L 53; p.1
Official
Journal
L. 363;
L 220;
L 209;
L 139;
L 192;
L 178;
L255,
Page
p.81
p.95
p.32
p.17
p.43
p.15
81/576/EEC
82/319/EEC
87/354/EEC
90/628/EEC
2006/96/EC
2005/40/EC
2000/3/EC
Amending
96/36/EC
Directive
No.
States relating to safety
Title of Base Directive
approximation of the
June 28, 1977 on the
Council Directive of
laws of the Member
belts and restraint
systems of motor
vehicles.
77/541/EE
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
20.12.2006
19.10.1977
15.08.1981
12.07.1988
06.12.1990
28.03.1978
L. 267; p.1
30.9.2005
reference/
L 81; p.3
Official
Journal
L. 363;
L 231;
L 181;
L 341;
p.146
Page
p.81
p.41
p.40
p.20
81/643/EEC
88/366/EEC
90/630/EEC
2006/96/EC
Amending
Directive
No.
the laws of the member
field of vision of motor
September 27, 1977 on
Title of Base Directive
December 21, 1977 on
the approximation of
the approximation of
Council Directive of
Council Directive of
states relating to the
states relating to the
laws of the member
vehicle drivers.
77/649/EE
78/316/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
May 2004).
(Where the
Adoption
Date of
date
date
date
date
19.11.1993
22.11.1994
28.03.1978
28.03.1978
L 81; p.27
L 81, p.49
reference/
Official
Journal
L 284;
L 299;
Page
p.25
p.26
93/91/EEC
Amending
94/53/EC
Directive
No.
the laws of the Member
the laws of the member
Title of Base Directive
December 21, 1977 on
December 21, 1977 on
controls, tell-tales and
demisting systems of
the approximation of
the approximation of
Council Directive of
Council Directive of
States relating to the
glazed surfaces of
interior fittings of
(identification of
motor vehicles
motor vehicles
defrosting and
indicators)
78/317/EE
78/318/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
31.12.1994
20.12.2006
26.06.1978
13.12.1994
20.11.1978
L 354; p.1
L 325; p.1
reference/
Official
Journal
L. 363;
L 168;
L 354;
Page
p.33
p.45
p.10
2006/96/EC
Amending
94/68/EC
94/78/EC
Directive
No.
the laws of the member
Title of Base Directive
wheel guards of motor
states relating to head
approximation of the
the approximation of
June 12, 1978 on the
October 16; 1978 on
Council Directive of
Council Directive of
states relating to the
states relating to the
restraints of seats of
laws of the member
systems of motor
wiper and wash
vehicles.
vehicles.
78/549/EE
78/932/EE
Directive
Base
no.
C
C
National Requirements relevant to the particular Directive
None
None
None
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
19 February
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
11.07.1987
20.12.2006
31.12.1980
15.08.1989
30.12.1993
28.12.1999
19.02.2004
L 49, p.36
reference/
Official
Journal
L. 363;
L 192;
L 238;
L 375;
L 329;
L 334;
p.043
Page
p.81
p.36
p.43
p.39
p.36
87/354/EEC
89/491/EEC
2006/96/EC
1999/100/E
93/116/EC
2004/3/EC
Amending
Directive
No.
C
Title of Base Directive
dioxide emissions and
the fuel consumption
Council Directive of
December 16, 1980
relating to Carbon
of motor vehicles.
motor vehicles.
80/1268/E
Directive
Base
EC
no.
Regulation 595/2009 repeal Directive 80/126/EEC with effect
National Requirements relevant to the particular Directive
from 31 December 2013.
None
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
The effective
Repealed as
May 2004).
(Where the
November
Adoption
Date of
from 9
date.
date
date
date
date
date
31.12.1980
09.04.1988
15.08.1989
16.05.1997
28.12.1999
09.02.1988
L 36; p.33
reference/
Official
Journal
L 125 ;
L 334 ;
L 375;
L 238;
L 92 ;
Page
p.46
p.50
p.43
p.31
p.32
88/195/EEC
89/491/EEC
1999/99/EC
88/77/EEC
Amending
97/21/EC
Directive
No.
gaseous and particulate
against the emission of
engine power of motor
Title of Base Directive
December 16, 1980 on
December 3, 1987 on
the approximation of
the approximation of
measures to be taken
Council Directive of
Council Directive of
states relating to the
states relating to the
the laws of member
the laws of member
vehicles.
80/1269/E
88/77/EE
Directive
Base
EC
no.
C
National Requirements relevant to the particular Directive
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
Repealed as
Repealed as
Repealed as
May 2004).
(Where the
November
November
November
Adoption
Date of
from 9
from 9
from 9
date.
date.
date.
25.10.2000
16.02.2000
18.04.2001
L 295; p.1
reference/
L 44; p.1
Official
Journal
L 107;
Page
p.10
91/524/EEC
1999/96/EC
2001/27/EC
Amending
Directive
No.
natural gas or liquefied
Title of Base Directive
petroleum gas for use
compression ignition
engines fuelled with
emission of gaseous
engines for use in
vehicles, and the
positive ignition
pollutants from
pollution from
in vehicles.
Directive
Base
no.
National Requirements relevant to the particular Directive
Regulation 595/2009 Repeal Directives 2005/55/EC and
Regulation 595/2009 Repeal Directives 2005/55/EC and
2005/78/EC with effect from 31 December 2013.
2005/78/EC with effect from 31 December 2013.
None
shall mean 1st
effective date
9 November
9 November
9 November
May 2004).
(Where the
Adoption
Date of
20.10.2005
29.11.2005
07.06.2006
L152, p.11
reference/
L275, p.1
L313, p.1
Official
Journal
Page
2005/78/EC
2006/51/EC
2005/55EC
Amending
Directive
No.
September 2005 on the
natural gas or liquefied
against the emission of
Title of Base Directive
Directive 2005/55/EC
gaseous & particulate
petroleum gas for use
Parliament and of the
compression-ignition
approximation of the
measures to be taken
States relating to the
engines fuelled with
emission of gaseous
laws of the Member
engines for use in
vehicles, and the
positive-ignition
of the European
pollutants from
pollutants from
Council of 28
in vehicles
2005/55/E
Directive
Base
no.
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
3 January 2009
shall mean 1st
effective date
The effective
The effective
May 2004).
(Where the
Adoption
Date of
date
date
23.04.1991
L 124; p.1
L 103; p.5
L192, p.51
19.7.2008
05051989
reference/
Official
Journal
Page
2008/74/EC
Amending
Directive
No.
Title of Base Directive
March 27, 1991 on the
lateral protection (side
89/297/EEC of April
approximation of the
approximation of the
Council Directive of
States relating to the
States relating to the
laws of the Member
laws of the Member
categories of motor
motor vehicles and
spray-suppression
systems of certain
Council Directive
guards) of certain
vehicles and their
13, 1989 on the
their trailers
89/297/EE
91/226/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
Regulation 661/2009 shall repeal this Directive with effect
National Requirements relevant to the particular Directive
from 1 November 2017.
November 2014.
November 2014.
None
None
None
None
shall mean 1st
effective date
The effective
The effective
The effective
The effective
The effective
9 April 2011
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
date
date
20.12.2006
14.05.1992
30.09.1995
14.05.1992
08.11.2001
14.05.1992
L 129; p.1
L.72, p.17
20.3.2010
reference/
Official
Journal
L. 363;
L 233;
L 129;
L 291;
L 129;
Page
p.81
p.73
p.11
p.24
p.95
2010/19/EU
2006/96/EC
2001/92/EC
Amending
95/48/EC
Directive
No.
masses and dimensions
Title of Base Directive
March 31, 1992 on the
Council Directive of
Council Directive of
Council Directive of
glazing materials on
of motor vehicles of
relating to tyres for
March 31, 1992 on
motor vehicles and
safety glazing and
March 31, 1992
their trailers.
category M1
trailers
92/21/EE
92/22/EE
92/23/EE
Directive
Base
no.
C
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
None
18th November
shall mean 1st
effective date
The effective
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
date
04.08.2001
17.02.2005
14.02.2004
31.12.1992
L 44; p.19
14/05/199
reference/
L46, p.42
Official
Journal
L 129 ;
L 409;
L 211,
p.154
Page
p.25
p.17
2001/43/EC
2005/11/EC
2004/11/EC
Amending
Directive
No.
similar speed limitation
Title of Base Directive
relating to the external
projections forward of
the cab's rear panel of
on- board systems of
Council Directive of
Council Directive of
limitation devices or
certain categories of
December 17, 1992
motor vehicles and
their trailers and to
motor vehicles of
relating to speed
March 31, 1992
motor vehicles
their fitting
category N
92/114/EE
92/24/EE
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
None
shall mean 1st
effective date
The effective
The effective
May 2004).
1st January
1st January
(Where the
Adoption
Date of
date
date
20.07.1994
20.12.2006
23.11.1995
20.12.2006
L 195; p.1
L 281, p.1
reference/
Official
Journal
L. 363;
L. 363;
Page
p.81
p.81
2006/96/EC
2006/96/EC
Amending
Directive
No.
Title of Base Directive
construction of certain
behaviour of materials
relating to the burning
May 30, 1994 relating
their trailers and their
and of the Council of
and of the Council of
European Parliament
European Parliament
coupling devices of
attachment to those
categories of motor
motor vehicles and
used in the interior
to the mechanical
October 24, 1995
Directive of the
Directive of the
vehicles
vehicle.
94/20/EC
95/28/EC
Directive
Base
no.
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
November 2014.
None
shall mean 1st
effective date
The effective
The effective
The effective
May 2004).
(Where the
Adoption
Date of
date
date
date
08.07.1996
25.08.1997
L 169; p.1
L 233; p.1
13/01/200
reference/
Official
Journal
L 009;
Page
p.14
1999/98/EC
Amending
Directive
No.
of motor vehicles in the
protection of occupants
vehicles in the event of
Title of Base Directive
Directive 70/156/EEC
event of a side impact
and of the Council of
and of the Council of
and of the Council of
European Parliament
European Parliament
European Parliament
May 20, 1996 on the
a frontal impact and
amending Directive
December 16, 1996
on the protection of
occupants of motor
Directive of the
Directive of the
Directive of the
and amending
70/156/EEC.
96/27/EC
96/79/EC
97/27/EC
Directive
Base
no.
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
shall mean 1st
effective date
The effective
The effective
The effective
May 2004).
(Where the
Adoption
Date of
date
date
date
13.02.2002
26.03.2003
16.01.1999
reference/
L 42; p.1
L 79; p.6
Official
Journal
L 011,
Page
p.25
2002/85/EC
2003/19/EC
Amending
Directive
No.
22 July 1997 relating to
trailers intended for the
Directive 70/156/EEC.
Title of Base Directive
transport of dangerous
trailers and amending
dimensions of certain
and of the Council of
European Parliament
amending Directive
December 14, 1998
categories of motor
goods by road and
vehicles and their
vehicles and their
relating to motor
Directive of the
the masses and
98/91/EC
Directive
Base
no.
Reg 661/2009 shall repeal this Directive with effect from 1
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
November 2014.
None
shall mean 1st
effective date
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
10.08.2000
20.12.2006
09.11.2001
L 203; p.9
reference/
Official
Journal
L. 363;
L 292;
Page
p.33
p.21
2006/96/EC
Amending
Directive
No.
70/156/EEC relating to
vehicles and amending
Title of Base Directive
Directive 2001/56/EC
Parliament and of the
and of the Council of
European Parliament
approximation of the
June 26, 2000 on the
States relating to the
the type approval of
laws of the Member
protection of motor
motor vehicles and
Council Directive
of the European
Directive of the
front underrun
their trailers.
70/156/EEC
Official
2000/40/E
2001/56/E
Directive
Base
no.
C
C
Reg 661/2009 shall repeal this Directive with effect from 1
National Requirements relevant to the particular Directive
November 2014.
None
None
None
shall mean 1st
30 September
effective date
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
28.11.2006
20.12.2006
L330, p.12
30/04/200
13/02/200
reference/
L 42; p.1
Official
Journal
L. 363;
L 153;
p.100
Page
p.81
2004/78/EC
2006/96/EC
2006/119/E
Amending
Directive
No.
C
their trailers, amending
Directive 78/548/EEC.
Title of Base Directive
Council of November,
carriage of passengers
Directive 2001/85/EC
Council of September
comprising more than
special provisions for
Parliament and of the
vehicles used for the
27, 2001 relating to
heating systems for
motor vehicles and
20 2001 relating to
repealing Council
Council Directive
Of The European
70/156/EEC and
2001/85/E
Directive
Base
no.
C
National Requirements relevant to the particular Directive
Regulation 78/2009 repeal Directives 2003/102/EC and
2005/66/EC with effect from 24 November 2009.
Not applicable
None
none
15th December
shall mean 1st
effective date
The effective
The effective
May 2004).
1st January
(Where the
Adoption
Date of
date
date
20.12.2006
06.02.2003
04.02.2004
25.11.2005
L 31; p.21
reference/
Official
Journal
L. 363;
L 321;
L 310;
Page
p.81
p.15
p.10
Commission
2006/96/EC
2004/90/EC
Amending
Directive
Decision
No.
Directive 2003/102/EC
to the driver's seat, and
before and in the event
Title of Base Directive
17 2003 relating to the
Council of November,
Directive 70/156/EEC
Directive 2005/64/EC
eight seats in addition
Parliament and of the
Parliament and of the
vulnerable road users
pedestrians and other
amending Directives
of a collision with a
amending Council
motor vehicle and
70/156/EEC and
of the European
of the European
protection of
97/27/EC
2005/64/E
2003/102/
Directive
Base
EC
no.
C
National Requirements relevant to the particular Directive
Regulation 78/2009 repeal Directives 2003/102/EC and
2005/66/EC with effect from 24 November 2009.
none
provisions shall
26th November
February 2010.
shall mean 1st
effective date
apply from 4
3 rd Feb 2009
25th August
May 2004).
(Where the
Adoption
Date of
They
25.11.2005
29.05.2006
14.1.2009
reference/
L 9; p.31
Official
Journal
L 309;
L 140;
Page
p.37
p.33
2006/368/E
2009/1/EC
Amending
Directive
Directive
No.
No.
C
2005 relating to the use
vehicles and amending
vehicles with regard to
Title of Base Directive
Council of 26 October
Council of 26 October
Directive 70/156/EEC
Directive 2005/66/EC
Parliament and of the
of frontal protection
amending Council
recoverability and
approval of motor
Council Directive
2005 on the type-
systems on motor
recyclability and
their reusability,
of the European
70/156/EEC
2005/66/E
Directive
Base
no.
C
National Requirements relevant to the particular Directive
None
None
obligations set
out in Articles
However, the
and
shall
4(6),
31 st July 2008.
Articles 10(1),
shall mean 1st
and 12 from 2
effective date
May 2004).
1st January
(Where the
July 2007.
Adoption
Date of
5(3)(d)
5(3)(e)
4(5),
20.12.2006
22.6.2007
28.7.2008
reference/
L171, p.1
L199, p.1
Official
Journal
L. 363;
Page
p.81
No.692/2008
Commission
2006/96/EC
Regulation
Amending
Directive
No.
vehicles with respect to
Title of Base Directive
20 June 2007 on type
and of the Council of
European Parliament
commercial vehicles
emissions from light
Regulation (EC) No
(Euro 5 and Euro 6)
approval of motor
vehicle repair and
and on access to
715/2007 of the
passenger and
maintenance
information
Regulation
715/2007
Directive
(EC) No.
Base
no.
National Requirements relevant to the particular Directive
Directives 80/1269/EEC, 2005/55/EC and 2005/78/EC are
repealed with effect from 31 December 2013.
type approval
from 1 January
2014 for all
apply from 1
2011 for the
of new types of
and
new vehicles
or put into
service in the
sold, registered
3(e)(i) of Annex
2009. However,
7 th August 2009
shall mean 1st
1(a)(i), 1(b)(i),
3(b)(i), 3(c)(i),
from 7 August
effective date
Community.
II shall apply
It shall apply
apply from 7
August 2009
Articles 8(3)
May 2004).
2(a), 3(a)(i),
and 10 shall
(Where the
September
3(d)(i) and
and points
Adoption
vehicles
from 31
Date of
18.07.2009
reference/
L188, p.1
Official
Journal
Page
No.595/2009
Commission
Regulation
Amending
Directive
No.
Title of Base Directive
Directive
Base
no.
National Requirements relevant to the particular Directive
None
None
None
None
None
5 January 2008.
5 January 2008.
December 2013.
February 2009,
5 January 2008
and Article 12,
2011, with the
shall mean 1st
26 April 2010
effective date
from the date
Article 11(3)
exception of
24 February
11(2) which
and Article
May 2004).
which shall
(Where the
apply from
set therein.
shall apply
Adoption
Date of
14.06.2006
22.06.2007
22.06.2007
L161, p.12
L161, p.33
L161, p.60
4.02.2009
reference/
L35, p.35
L.122 p.1
Official
Journal
Page
Commission
2007/37/EC
Regulation
Amending
706/2007
Directive
Reg. No.
No.
No.
type-approval of motor
vehicles and amending
vehicles with regard to
Title of Base Directive
hydrogen systems and
from air-conditioning
Relating to emissions
such components and
hydrogen propulsion,
for the type-approval
for the installation of
Relating to, and lays
requirements for the
down fundamental
Council Directive
systems in motor
components and
provisions on
70/156/EEC
of hydrogen
systems.
2006/40/E
Directive
Reg. No
79/2009
Base
no.
C
2001/85/EC, 2003/97/EC shall be repealed with effect from
96/79/EC, 97/27/EC, 98/91/EC, 2000/40/EC, 2001/56/EC,
92/22/EEC, 92/24/EEC,92/114/EEC,94/20/EC, 95/28/EC,
National Requirements relevant to the particular Directive
Directive 92/23/EEC shall be repealed with effect from 1
76/761/EEC, 76/762/EEC, 77/389/EEC,77/538/EEC,
0/387/EEC, 70/388/EEC, 71/320/EEC, 72/245/EEC,
74/483/EEC, 75/443/EEC,76/114/EEC,76/115/EEC,
78/316/EEC, 78/317/EEC,78/318/EEC,78/549/EEC,
77/539/EEC,77/540/EEC,77/541/EEC77649/EEC,
74/60/EEC, 74/61/EEC,74/297/EEC,74/408/EEC,
78/932/EEC, 89/297/EEC,91/226/EEC,92/21/EC,
(according to Article 19 of Regulation 661/2009)
Directives 70/221/EEC,70/222/EEC,70/311/EEC,
6/758/EEC,76/759/EEC,76/760/EEC,
76/756/EEC, 6/757/EEC,
1 November 2014
November 2017
96/27/EC,
None
shall mean 1st
effective date
August 2009.
August 2010
May 2004).
(Where the
Adoption
Date of
18.05.2010
31.07.2009
28.7.2010
reference/
L.200 p.1
L.196 p.6
Official
Journal
Page
Amending
406/2010
Directive
No.
REGULATION EU No
661/2009 of the EP and
REGULATION EC No
defrosting an demisting
separate technical units
general safety of motor
Title of Base Directive
2010 concerning type-
approval requirements
July 2009 concerning
vehicles, their trailers
the COUNCIL of 13
requirements for the
672/2010 of 27 July
intended therefore.
systems of certain
components and
for windscreen
type-approval
and systems,
661/2009
672/2010
Directive
Reg. No
Reg. No
Base
no.
B
.”.
National Requirements relevant to the particular Directive
shall mean 1st
effective date
May 2004).
(Where the
Adoption
Date of
reference/
Official
Journal
Page
Amending
Directive
No.
of motor vehicles, their
separate technical units
Title of Base Directive
approval requirements
for the general safety
European Parliament
Regulation (EV) No
trailers and systems,
motor vehicles and
and of the Council
intended therefor
concerning type-
components and
661/2009 of the
implementing
Directive
Base
no.
11. For Schedule XXII to the principal regulations, there
shall be substituted the following:-
“ SCHEDULE XXII
LIST OF DIRECTIVES AND REGULATIONS AMENDING DIRECTIVE 2007/46/EC WHICH
ARE IN FORCE.
Title of Base Directive/Regulation
COMMISSION REGULATION (EC) No 1060/2008 of 7 October
2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive
2007/46/EC of the European Parliament and of the Council
establishing a framework for the approval of motor vehicles and their
trailers, and of systems, components and separate technical units
intended for such vehicles (Framework Directive)
COMMISSION REGULATION (EC) No 78/2009 of the European
Parliament and of the Council of 14 January 2009 on the type-approval
of motor vehicles with regard to the protection of pedestrians and other
vulnerable road users, amending Directive 2007/46/EC and repealing
Directives 2003/102/EC and 2005/66/EC
COMMISSION REGULATION (EC) No 79/2009 of the European
Parliament and of the Council of 14 January 2009 on type-approval of
hydrogen-powered motor vehicles, and amending Directive
2007/46/EC
COMMISSION REGULATION (EC) No 385/2009 of 7 May 2009
replacing Annex IX to Directive 2007/46/EC of the European
Parliament and of the Council establishing a framework for the
approval of motor vehicles and their trailers, and of systems,
components and separate technical units intended for such vehicles
(Framework Directive)
REGULATION (EC) No 595/2009 of the European Parliament and of
the Council of 18 th June 2009 on type-approval of motor vehicles and
engines with respect to emissions from heavy duty vehicles (Euro VI)
and on access to vehicle repair and maintenance information and
amending Regulation (EC) No 715/2007 and Directive 2007/46/EC
and repealing Directives 80/1269/EEC, 2005/55/EC and 2005/78/EC
COMMISSION REGULATION (EC) No 631/2009 of 22 July 2009
laying down detailed rules for the implementation of Annex I to
Regulation (EC) 78/2009 of the European Parliament and of the
Council on the type-approval of motor vehicles with regard to the
protection of pedestrians and other vulnerable road users, amending
Directive 2007/46/EC and repealing Directives 2003/102/EC and
2005/66/EC
REGULATION (EC) 661/2009 of 13 July 2009 concerning type-
approval requirements for the general safety of motor vehicles, their
trailers and systems, components and separate technical units intended
therefore.
COMMISSION DIRECTIVE 2010/19/EU of 9 March 2010 amending,
for the purpose of adaptation to technical progress in the field of spray-
suppression systems of certain categories of motor vehicles and their
trailers, council Directive 91/226/EEC, and Directive 2007/46/EC of
the European Parliament and of the Council.
Title of Base Directive/Regulation
REGULATION (EC) 371/2010 of 16 April 2010 replacing Annexes
V,X, XV and XVI to Directive 2007/46/EC of the European
Parliament and of the Council establishing a framework for the
approval of motor vehicles and their trailers, and of systems,
components and separate technical units intended for such vehicles.