MT
Construction Products (Amendment) Regulations, 2011
Table of Provisions (366)
Statutory Text (366 Articles)
B
Suppliment
tal-Gazzetta
tal-Gvern ta’ Malta Nru. 18,721, 22 ta’ Marzu, 2011
Chairman,
Malta
Standards Authority
Prime Minister
Taqsima B
L.N.
*** of 2010
PRODUCT SAFETY ACT
L.N. 104 of 2011
(CAP. 427)
PRODUCT SAFETY ACT
Construction
(CAP. Products
(Amendment)
427)
Regulations, 2011
Construction Products (Amendment) Regulations, 2011
IN exercise of the powers conferred by articles 38 and 39 of the
IN exercise
Safety of Act,
the powers
conferred
by articles
on 38
and advice
39 of of the Malta
Product
the Prime
Minister,
the
the
Product
Safety
Act,
the
Prime
Minister,
on
the
advice
of
the
Standards Authority, has made the following regulations:-
Malta Standards Authority, has made the following regulations:-
The title of these regulations is the Construction Products (Amendment) Regulations,
Citation.
1. 2011,
The title
of these
shall regulations
be read and is construed
the Construction
as one with Citation.
and they
the Construction Products
2001. Products (Amendment)
Regulations,
2011,
and
they
shall
be
read
L.N. 270 of
Regulations, 2001, hereinafter referred to as “the principal regulations”.
and construed as one with the Construction Products Regulations, L.N. 270 of 2001.
Substitutes 2001,
hereinafter
referred
IV to to
the as principal
“the principal
regulations”.
Schedule
regulations
shall be substituted as follows
Schedule IV to
the principal
2. Schedule IV to the principal regulations shall be
Substitutes Schedule
regulations.
IV to the principal
substituted as follows
regulations.
“Schedule IV
Issued ETAGs 1
End of
Reference
period of
Description
Number
co-
existence
ETAG
Metal anchors for use in Concrete Part 1
--
001-1
Anchors in general
ETAG
Metal anchors for use in Concrete Part 2
--
001-2
Torque-controlled expansion anchors
ETAG
Metal anchors for use in Concrete Part 3
--
001-3
Undercut anchors
ETAG
Metal anchors for use in Concrete Part 4
--
001-4
Deformation-controlled expansion anchors
ETAG
Metal anchors for use in Concrete Part 5
--
001-5
Bonded anchors
1 The full text of the ETAGs may be downloaded from the EOTA website (http://www.eota.eu) under
‘Endorsed ETAG’s’.
B
Metal anchors for use in concrete Part 56
ETAG
Anchors for multiple use for non-structural
--
001-6
applications
ETAG
Structural sealant glazing systems Part 1
Jun 2003
002-1
Supported and unsupported systems
ETAG
Structural sealant glazing systems Part 2
16 Oct 2004
002-2
Coated aluminium systems
ETAG
Structural sealant glazing systems Part 3
Feb 2005
002-3
Thermal breaks
Internal partition kits for use as non loadbearing
ETAG 003
Mar 2004
walls
External thermal insulation composite systems
ETAG 004
May 2003
with rendering
ETAG 005
Liquid applied roof waterproofing kits
May 2003
Systems of mechanically fastened flexible roof
ETAG 006
May 2003
waterproofing membranes
ETAG 007
Timber-frame building kits
May 2004
ETAG 008
Prefabricated stairs kits
16 Oct 2004
Non-load-bearing
permanent
shuttering
ETAG 009
kits/systems based on hollow blocks or panels
Feb 2005
of insulating materials and sometimes concrete
ETAG 010
Self supporting translucent roof kits
Aug 2006
Light composite
wood-based
beams
and
ETAG 011
16 Oct 2004
columns
ETAG 012
Log building kits
Feb 2005
Post tensioning kits for pre-stressing of
ETAG 013
Feb 2005
structures
ETAG 014
Plastic anchors for ETICS
16 Oct 2004
ETAG 015
Three dimensional nailing plates
Aug 2007
ETAG
Composite light weight panels Part 1
Nov 2006
016-1
ETAG
Composite light weight panels Part 2
Nov 2006
016-2
B
ETAG
Composite light weight panels Part 3
Dec 2007
016-3
ETAG
Composite light weight panels Part 4
Dec 2007
016-4
ETAG 017
Veture Kits
Sep 2008
ETAG
Fire protective products Part 1: General
Jun 2007
018-1
ETAG
Fire protective products Part 2: Reactive
Apr 2009
018-2
coatings for fire protection of steel elements
Fire protective products Part 3: Renderings and
ETAG
Nov 2008
Rendering Kits intended for Fire Resisting
018-3
Applications
ETAG
Fire protective products Part 4: Fire protective
Jun 2007
018-4
board, slab and mat products and kits
Pre-fabricated wood-based loadbearing stressed
ETAG 019
Nov 2007
skin panels
Plastic anchors for multiple use in concrete and
ETAG 020
masonry for non-structural applications Part 1
Apr 2009
General
Plastic anchors for multiple use in concrete and
masonry for non-structural applications Part 2
ETAG 020
Apr 2009
Plastic anchors for use in normal weight
concrete
Plastic anchors for multiple use in concrete and
ETAG 020
Apr 2009
masonry for non-structural applications Part 3
Plastic anchors for use in solid masonry
Plastic anchors for multiple use in concrete and
masonry for non-structural applications Part 4
ETAG 020
Apr 2009
Plastic anchors for use in hollow perforated
masonry
Plastic anchors for multiple use in concrete and
masonry for non-structural applications Part 5
ETAG 020
Apr 2009
Plastic anchors for use in autoclaved aerated
concrete
Plastic anchors for multiple use in concrete and
ETAG 020
masonry for non-structural applications Annex
Apr 2009
A: Details of tests
B
Torque-controlled expansion anchor made of
galvanized steel of sizes M8, M10, M12, M16, M20
and M24 for use in concrete
Torque-controlled expansion anchor made of stainless
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in concrete
Torque-controlled expansion anchor, made of zinc
electroplated steel, for use in concrete: sizes M8, M10,
M12, M16 and M20.
Undercut anchor of sizes M6, M8, M10, M12 and M16
for use in concrete.
Torque-controlled expansion anchor, made of
galvanised steel or stainless steel, for use in non
cracked concrete: sizes M6, M8, M10, M12, M16 and
M20.
Torque-controlled expansion anchor, made of zinc
electroplated steel, for use in concrete : sizes M8, M10,
M12 and M16.
Special anchor made of stainless steel for the fastening
of additional securing in a permanent manner of
external weather resistant skins of three-layer external
wall panels made of concrete
Self-cutting undercut anchor, made of galvanised steel,
for use in concrete: sizes M10, M12 and M16 and M20
and made of stainless steel for use in concrete: sizes
M10, M12 and M16
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete.
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 and M20 for use
in concrete.
Torque-controlled expansion anchor, made of zinc
electroplated steel, for use in non cracked concrete
sizes M8, M10, M12, M16 and M20.
Torque controlled expansion anchor made of
galvanized steel of sizes M10, M12 and M16 for use in
concrete.
Permanent insulating shuttering kit for whole buildings
Partition wall kit for sanitary applications
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete.
Torque controlled expansion anchor made of
galvanized steel of sizes M8, M10, M12 and M16 for
use in concrete.
Structural sealants for use in structural sealant glazing
systems.
Torque controlled expansion anchor made of coated
steel of sizes M8, M10 and M12 for use in concrete
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M8, M10, M12, M16 and M20.
Torque-controlled expansion anchor, made of stainless
steel, for use in non cracked concrete: size M8.
Torque-controlled expansion anchor, made of
galvanised steel, for use in cracked or non cracked
concrete: sizes M8, M12 and M16.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M6, M8, M10 and M12.
Torque Controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M6, M8, M10, M12, M14 and M16.
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete.
Loose fill thermal and/or acoustic material made of
hemp fibres.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
Torque controlled expansion anchor with internal
thread of sizes M6, M8, M10 and M12 for use in
concrete.
Torque controlled expansion anchor, made of
galvanised steel, for use in non-cracked concrete: sizes
M6, M8, M10, M12 and M16.
Torque controlled expansion anchors, made of
galvanised steel, for use in non cracked concrete: sizes
M6, M8, M10, M12 and M16.
PEIKKO HPM/L anchor bolt for the connection of
prefabricated reinforced concrete columns.
Torque controlled expansion anchor with internal
thread made of sizes M6, M8, M10 and M12 for use in
concrete.
Screwed-in anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Screwed-in anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
Bonded anchor in the size of M6 to M30 for use in
non-cracked concrete.
Bonded anchor in the size of M6 to M30 for use in
non-cracked concrete.
Bonded anchor (injection type) with anchor rod made
of stainless steel 1.4529 of sizes M6, M8, M10, M12,
M16, M20, M24 and M30 for use in non-cracked
concrete.
Light composite wood-based beam for structural
purposes.
Torque controlled expansion anchor made of stainless
steel 1.4529/1.4565 of sizes M8, M10, M12 and M16
for use in concrete.
Torque controlled expansion anchor made of
galvanized steel of sizes M6, M8, M10, M12, M16 and
M20 for use in concrete.
Torque-controlled expansion anchor made of
galvanized steel of sizes M6, M8, M10, M12, M16 and
M20 for use in concrete.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Torque-controlled expansion anchor, made of
galvanised steel, for use in concrete: sizes M8, M10,
M12, M16, M20 and M24.
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M6, M8, M10, M12, M16,
M20, M24 and M30 for use in non- cracked concrete.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M16 and M20
for use in non-cracked concrete.
Torque-controlled expansion anchor, made of zinc
electroplated steel, for use in concrete: sizes M8, M10,
M12 and M16.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non-cracked concrete: sizes
M8, M10, M12, M16 and M20.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non-cracked concrete: sizes
M8, M10, M12, M16 and M20.
Relocatable non-loadbearing internal partition kit.
Sealant used in structural and non-structural edge seal
of insulated-glass unit for use in structural sealant
glazing systems.
Powder actuated fastener for the fixing of bonded
thermal insulation composite systems in uncoated
concrete.
Anchor for fixing of External Thermal Insulation
Composite Systems wit rendering for use in concrete
and masonry.
The insulating dry floor finishing systems with
Fermacell flooring elements are intended for use in
new build and existing (refurbishment) houses and
other buildings for raising the height of floors or
leveling out uneven floors. They can only be used on
structural floors which provide overall support to the
flooring elements. The floor finishing systems are not
intended to be used without a floor covering.
Bonded anchor made of galvanised steel for use in non
cracked concrete: sizes M8, M10, M12, M16, M20,
M24 an M30.
Bonded anchor made of stainless steel for use in non
cracked concrete: size M8, M10, M12, M16, M20,
M24 and M30.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in concrete.
Polypropylene cavity trays for use as a damp-proof
course in cavity walls with an outer leaf of brickwork
or, in timber-framed constructions, with a masonry
cladding or skin.
Log building kit.
Timber frame building kit.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12, M16, M20
and M24 for use in concrete.
Torque-controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in concrete.
Nailed-in plastic anchor for fixing of thermal insulation
composite system with rendering in concrete and
masonry.
External Thermal Insulation Composite System With
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Liquid applied roof waterproofing on the basis of
flexible unsaturated.
Liquid applied roof waterproofing on the basis of
flexible unsaturated polyester.
Liquid applied roof waterproofing on the basis of
flexible unsaturated polyester.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M8x30, M8x40, M10, M12,
M16 and M20 for use in non-cracked concrete.
Torque controlled bonded anchor of sizes M10/75,
M12/95, M16/105, M16/125 and M20/170 for use in
concrete.
Thermal and/or acoustic insulation product made of
sheep´s wool "Alchimea lana Dämmvlies" for building
applications.
Post-tensioning kit for prestressing of structures with
unbonded monostrands for concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Structural sealant for use in structural sealant glazing
kits.
Steel plate with cast-in KÖCO-headed studs made of
steel.
Steel plate with cast-in KÖCO-headed studs made of
steel.
Steel plate with cast-in Nelson-headed studs made of
steel.
Liquid applied roof waterproofing on the basis of
polyurethane.
Liquid applied roof waterproofing on the basis of
polyurethane.
Liquid applied roof waterproofing on the basis of
polyurethane.
Liquid applied composite waterproofing for inverted
roofs on the basis of hot-applied polymer-modified
bitumen
and
polymerbitumen
sheeting
for
waterproofing of roofs.
Liquid applied composite waterproofing for inverted
roofs on the basis of hot-applied polymer-modified
bitumen
and
polymerbitumen
sheeting
for
waterproofing of roofs.
Fibre gypsum boards used for planking and lining of
components.
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M8x30, M8x40, M10, M12,
M16 and M20 for use in non-cracked concrete.
Liquid applied roof waterproofing using kits based on
polyurethane.
Liquid applied roof waterproofing on the basis of an
elasticised solventfree thermosetting plastic with
elatomeric fillers.
Liquid applied roof waterproofing kits, based on water
dispersiable polymers (LARWK).
Special anchor for the fixing of façade plates from their
back side made of dust-pressed plates (stoneware)
according to EN 176.
Thermal insulation board made of cellulose and
polyester fibres.
External Thermal
Insulation
Composite
System
(ETICS).
Liquid applied roof waterproofing on the basis of
polyurethane.
Liquid applied roof waterproofing on the basis of
polyurethane.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
use in non-cracked concrete.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Torque-controlled expansion anchor, made of stainless
steel, for use in concrete; sizes M8, M10, M12 and
M16.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M8, M10 and M12 for use in
non-cracked concrete.
Light composite wood-based beams and columns for
structural purposes.
Annular ringed shank nails and connector screws.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Liquid applied roof waterproofing on the basis of
polyurethane.
Liquid applied roof waterproofing on the basis of water
dispersible polymers.
Light Composite wood-based beam.
Screwed-in anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Liquid Applied roof waterproofing on the basis of
polymer modified bitumen emulsion.
Anchor made of galvanised steel for multiple use for
non-structural applications in concrete.
Anchor made of galvanised steel for multiple use for
non-structural applications in concrete.
Anchor made of galvanised steel for multiple use for
non-structural application in concrete.
Bonded anchor in the sizes of dia 8 to dia 32 for use in
non-cracked concrete.
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
External Thermal Insulation Composite Systems with
rendering.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Liquid applied
waterproofing
on
the
basis
of
polyurethane.
Liquid applied roof waterproofing on the basis of
polyurethane.
Prefabricated tension rod system.
Prefabricated tension rod system.
Three-dimensional Nailing plate (Timber to timber
joist hanger).
Anchor made of galvanised steel for multiple use for
non-structural applications in concrete.
Structural sealant glazing system for use in curtain
walling.
Liquid applied roof waterproofing using kits based on
polyurethane.
Cast-in steel plate with welded joint Teräspeikko-
Anchor bolts made of steel
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12, and M16 for
use in concrete.
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete.
Timber frame construction kits for low rising housing
and similar building structures.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M8, M10, M12, M16 and M20.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M8, M10, M12, M16 and M20.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Screwed- in plastic anchor for fixing of external
thermal insulation composite systems with rendering in
concrete and masonry.
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M8, M10, M12, M16, and
M20 for use in non-cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M10, M12 and M16 for use in
non-cracked concrete.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Nailed-in anchor for fixing of external insulation
composite systems with rendering in concrete and
masonry.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Insulating material made of loose, free cellulose fibres.
In-situ formed loose fill insulation material and/or
acoustic insulation material made of vegetable or
animal fibres.
Liquid applied Roof Waterproofing Kit based on
Polyurethane.
Torque controlled bonded anchor of sizes M8x55,
M10x65, M12x75, M16x90 for use in concrete.
Torque controlled bonded anchor of sizes M8x55,
M10x65, M12x75, M16x90 for use in concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
Torque controlled bonded anchor with anchor rod of
sizes M8, M10, M12, M16, M20 and M24 for use in
concrete.
Torque controlled bonded anchor (injection type) with
anchor rod made of stainless steel of sizes M8, M10,
M12, M16, M20 and M24 for use in concrete.
Liquid applied Roof Waterproofing kits, based on
Epoxy Resin.
Undercut anchor made of stainless steel of sizes M10,
M12, M16 and M20 for use in concrete.
Undercut anchor made of galvanised steel of sizes
M10, M12, M16 and M20 for use in concrete.
Torque-controlled expansion anchor made of cinc
yellow passivated steel of sizes M8, M10, M12, M16,
M20 and M24 for use in non cracked concrete only.
Hilti powder actuated fasteners X-ENP-19 L15, X-
ENP-19 L 15MX, X-ENP-19 L 15MXR in
combination with Hilti fastening tools DX 76, DX 76
MX, DX 860-ENP, DX 750, DX 750 MX, DX A70 for
fastening of steel sheeting to steel members.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for teh use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External thermal Insulation Composite System with
rendering for use as external insulation ob building
walls.
Liquid Applied roof waterproofing on the basis of
polyurethane.
Liquid applied roof waterproofing on the bass of
polyurethane.
Torque controlled bonded anchor with anchor rode
made of stainless steel of sizes M8, M10, M12, M16,
M20 and M24 for use in concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16, M20
and M24 for use in concrete.
Torque controlled expansion anchor with internal
thread made of stainless steel of sizes M6, M8, M10
and M12 for use in concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M8x30, M8x40, M10, M12,
M16 and M20 for use in non-cracked concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16
for use in concrete.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation of building walls.
Structural Sealant for use in structural sealant glazing
systems.
Structural Sealant for use in structural sealant glazing
systems.
Nailed -in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Concrete screw made of galvanised steel of sizes
MMS-10, MMS-12, MMS-14 and MMS-16 for use in
concrete.
Concrete Screw made of stainless steel of sizes MMS-
10 A4 and MMS-12 A4 for use in concrete.
Concrete screw made of galvanised steel of sizes 7,5,
10, 12, 14 and 16 for use in concrete.
Torque controlled self undercutting anchor, made of
stainless steel, for use in cracked or non cracked
concrete: sizes M8, M12 and M16.
Hydraulic binder based on granulated blast furnace slag
for preparation of concrete, mortar and other mixes for
construction and for the manufacturing of construction
products.
PROXAN joint sealing compound PK 25 G (pouring
grade) as a component of the PROXAN joint sealing
system used in plants for the containment, handling and
filling of substances hazardous to water.
PROXAN joint sealing compound PK 25 ST (gun-
grade) as a component of the PROXAN joint sealing
system used in plants for the containment, handling and
filling of substances hazardous water.
Torque controlled expansion anchor made of stainless
steel of sizes M6, M8, M10, M12, M16 and M20 for
use in non-cracked concrete.
Torque controlled expansion anchor made of stainless
steel of sizes M6, M8, M10, M12, M16 and M20 for
use in non-cracked concrete.
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete.
Bonded Anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete.
Anchor made of galvanised steel for multiple use for
non-structural applications in concrete.
Screwed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Plastic Piping kits for heating systems, made of PE-RT
Type I with an oxygen barrier layer.
Insulating material made of loose free cellulose fibres.
Torque-controlled expansion anchor, made of
galvanised steel, for use in cracked and non-cracked
concrete: sizes M6, M8, M10, M12, M16 and M20.
External Thermal Insulation Composite System with
rendering for teh use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded Anchor in the size dia 8 to dia 32 for use in
non-cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Deformation-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M6, M8, M10, M12 and M16.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite Systems with
Rendering.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls.
Torque Controlled expansion Anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16
for use in concrete.
Structural Sealant for use in insulating glass units.
Torque controlled expansion anchor made of
galvanized steel of sizes M8, M10, M12 and M16, M20
and M24 for use in concrete.
Liquid applied roof waterproofing using kits based on
water dispersable polymers.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Prefabricated stair with solid wood steps and a load-
bearing handrail made of solid wood.
Joint sealing compound "BIGUMA - KV 3 PG
(pouring grade) as a component of the joint sealing
system by Dortmunder Gussasphalt GmbH & Co KG
used in plants for the containment, handling and filling
of substances hazardous to water.
Joint Sealing Compound "BIGUMA - KV 3 GG (gun
grade) as a component of the joint sealing system
Dortmunder Gussasphalt GmbH & Co KG used in
plants for the containment, handling an filling of
substances hazardous to water.
Timber Frame Construction kits for low-rise housing
and similar building structures.
Thermal and or acoustic insulation mat made of sheep
wool.
Non-loadbearing permanent shuttering kits "Durisol",
"HARML", "ISOSPAN" and "THERMOSPAN" based
on hollow blocks of wood-chips aggregate concrete.
Type II addition for production of concrete including in
particular cast-in-situ or prefabricated structural
concrete confirming to European standard EN 206-1.
Fly ash according to this ETA may also be used in
mortars and grouts.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded anchor made of galvanised steel for use in non
cracked concrete: sizes M8, M10, M12, M16, M20 and
M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 & M24.
Bonded injection type Anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes: M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded anchor made of galvanised steel for use in non
cracked concrete: size M8, M10, M12, M16, M20 and
M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20, M24.
Bonded anchor made of galvanised steel for use in non
cracked concrete: sizes M8, M10, M12, M16, M20 and
M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Bonded injection type anchor rod with anchor sizes
M8, M10, M12, M16, M20, M24 and M30 or internal
sleeve sizes M8, M10, M12, M16 and M20, made of
galvanised steel for use in non cracked concrete.
Bonded injection type anchor with anchor rod sizes
M8, M10, M12, M16, M20, M24 and M30 or internal
sleeve sizes M8, M10, M12 and M16, made of stainless
steel for use in non cracked concrete.
Structural sealant glazing kit, infill facade structure;
SCHÜCO International KG FW 50 + SG.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
use in non-structural applications in concrete.
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete.
Plastic piping kits for heating systems, made of PE-RT
Type I with an oxygen barrier layer.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete.
Wedge-Anchor
Bonded and unbonded bar Post -tensioning kit for
prestressing of structures.
Bonded and unbonded bar post-tensioning kit for
prestressing of structures.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Liquid applied roof waterproofing on the basis of
polyurethane.
Door threshold with build-in draining system for
draining off of water.
Liquid applied roof waterproofing on the basis of
polyurethane.
External Thermal Insulation Composite System with
rendering for the use as external insulation of Building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Light Composite wood-based Beams and columns for
structural use.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M8x30, M8x40, M10, M12,
M16 and M20 for use in non-cracked concrete.
Permanent Insulating Formwork.
Nailed -in plastic anchor for fixing of external thermal
insulation composite systems with rendering on
concrete and hollow masonry.
Nailed-in plastic Anchor for fixing of external thermal
insulation composite systems with rendering on
concrete and hollow masonry.
Liquid applied roof waterproofing on the basis on
polyurethane polymers.
Liquid Applied roof waterproofing, using kits based on
hot-applied polymer-modified bitumen.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation of building walls (ETICS).
Deformation-controlled expansion anchor made of
Stainless steel of sizes M6, M8x30, M8x40, M10, M12
M16 and M20 for use in non-cracked concrete.
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in concrete.
Deformation-controlled anchor made of galvanised
steel of sizes M6, M8, 10, M12, M16 and M20 for use
in non-cracked concrete.
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
Torque controlled expansion anchor made of stainless
steel of sizes M6, M8, M10, M12, M16 and M20 for
use in non-cracked concrete.
Torque controlled bonded anchor with anchor rod made
of galvanised steel of sizes M8, M10, M12, M16 M20
and M24 for use in concrete.
Torque controlled bonded anchor with anchor rod made
of stainless steel of sizes M8, M10, M12, M16, M20
and M24 for use in concrete.
Torque controlled bonded anchor with anchor rod made
of stainless steel 1.4529 of sizes M8, M10, M12, M16,
M20 and M24 for use in concrete.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete.
Type II addition for production of concrete, including
in particular cast-in-situ or prefabricated structural
concrete conforming to European Standard EN 206-1.
Fly Ash according to this ETA may also be used in
mortars and grouts.
Torque controlled expansion anchor made of
galvanised steel for use in non-cracked concrete: sizes
M6, M8, M10 and M12.
Non load bearing shuttering kit "ARGISOL" based on
shuttering elements of EPS.
External Thermal Insulation Composite Systems with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M10, M12 and M16 for use in
non-cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Thermal Insulating board made of mineral material.
Thermal Insulating board made of mineral material.
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M 8x30, M 8x40, M10,
M12 M16 and M20 for use in non-cracked concrete.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M16 and M20
for use in non-cracked concrete.
Bonded injection type anchor made of galvanised steel
for use in non-cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of stainless steel
for use in non-cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Torque controlled expansion anchor, made of zinc
electroplated steel for use in non cracked concrete
sizes M8, M10, M12, M16 and M20.
Insulation Material made of loose, free cellulose fibres.
Cellular glass loos fill for use as thermal and frost
insulating layer, water capillary barrier, drainage, and
light fill in building foundations and road construction
applications.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Log Building Kit.
Log Building Kit.
Insulating material made of loose, free cellulose fibres.
Structural Sealant glazing Systems.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
wall.
Liquid Applied roof waterproofing on the basis of
polyurethane.
Special anchor for the fixing of facade plates from their
back side made of dust-pressed ceramic plates
(stoneware) "Granito Ceramico" according to EN
14411.
Torque-controlled expansion anchor made of stainless
steel of sizes M6, M8, M10, M12 and M16 for use in
non-cracked concrete.
Structural Sealant for use in structural sealant glazing
kit.
BBV - Internal Bonded Strand Post-tensioning System
for 3 to 27 Strands (140 & 150 mm!).
External Thermal Insulation Composite system with
rendering for use as external insulation of building
walls.
External Thermal Insulation Composite system with
rendering for use as external insulation of building
walls.
External Thermal Insulation Composite Systems
(ETICS).
Prefabricated Tension Rod System.
Liquid applied roof waterproofing on the basis of
flexible reactive polymethylmethacrylate.
Thermal and/or acoustic insulation made from flax
fibres.
Liquid applied roof waterproofing on the basis of
flexible unsaturated polyester.
Timber Units for walls, ceilings and roofs.
Natural Calcined puzzolana as type II addition.
System of mechanically
fastened
flexible
roof
waterproofing membranes.
Bonded Anchor with anchor rod made of galvanised
steel of sizes M10, M12, M16, M20 and M24 for use in
non-cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Large-sized fibre gypsum panels used for walls of
prefabricated houses.
Light Composite wood-based beams and columns for
structural use.
Nailed-in plastic anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Insulating material made of lose, free cellulose fibres.
ALSAN 310 Liquid Applied roof waterproofing kit.
Bonded Anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in non-
cracked concrete.
Bonded anchor with anchor rod made of stainless steel
1.4529 of sizes M10, M12, M16, M20 and M24 for use
in non-cracked concrete.
Bonded anchor with anchor rod made of all types of
steel of sizes M8 to M24 for use in non-cracked
concrete.
Bonded anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in non-
cracked concrete.
Liquid applied roof waterproofing on the basis of
polymethylmethacrylate.
Liquid applied roof waterproofing on the basis of
polymethylmethacrylate.
weber.therm-WDVS B 200 Flex & terratherm-WDVS
B 200 Flex (mit EPS) External Thermal Insulation
Composite System with rendering.
Log Building Kit.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in non-cracked concrete.
Torque controlled expansion anchor made of zinc
plated steel of sizes M6, M8, M10, M12, M14 M16 Y
and M20 for use in non cracked concrete only.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation ob building
walls.
Bonded anchor.
Bonded anchor with anchor rod of sizes M8, M10,
M12, M16, M20, M24 and M30 for use in non-cracked
concrete.
Bonded anchor with anchor rod of sizes M10, M12 and
M16 made of stainless steel 1.4529/1.4565 for use in
non-cracked concrete.
Bonded anchor with anchor rod or internal sleeve made
of galvanised steel of sizes M8, M10, M12, M16, M20,
M24 M27 and M30 for use in non-cracked concrete.
Bonded anchor with anchor rod or internal sleeve made
of stainless steel of sizes M8, M10, M12, M16, M20,
M24, M27 and M30 for use in non cracked concrete.
Bonded anchor with anchor rod made of stainless steel
1.4529 of sizes M8, M10, M12, M16, M20, and M24
for use in non-cracked concrete.
Masterflex 700 FR (TK 63 G) pouring grade as a
component of the joint sealing system of the BASF
Bautechnik GmbH used in plants for the containment,
handling and filling of substances hazardous to water.
Masterflex 700 FR (TK 63 S) gun grade as a
component of the joint sealing system of the BASF
Bautechnik GmbH used in plants for the containment,
handling and filling of substances hazardous to water.
Non-load bearing permanent shuttering kits
"DURISOL",
"HARML",
"ISOSPAN"
and
"THERMOSPAN" based on hollow blocks of wood-
chips aggregate concrete.
Non-Load bearing permanent shuttering kits
"DURISOL","HARML",
"ISOSPAN"
and
"THERMOSPAN" based on hollow blocks of wood
chips aggregate concrete.
"DURISOL",
"HARML","ISOSPAN",
and
"THERMOSPAN", based on hollow blocks of wood-
chips aggregate concrete.
Liquid applied roof waterproofing on the basis of
polyurethane.
Liquid applied roof waterproofing on the basis of
polyurethane.
Liquid applied roof waterproofing on the basis of
polyurethane.
Special anchor for the rear fixing of facade panels
made of selected natural stones according to EN 1469.
Nailed-in plastic anchor for fixing of external internal
insulation composite systems with rendering in
concrete and masonry.
Torque-controlled expansion anchor made of
galvanised steel, for use in non cracked concrete: sizes
M8, M10, M12, M16 and M20.
Bonded anchor made of galvanised steel for use in non
cracked concrete: sizes M8, M10, M12 and M16.
Bonded Anchor - Galvanised steel.
Bonded anchor - Stainless steel.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M20 and M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 M20 and M24.
Bonded injection type anchor with anchor rod sizes
M8, M10, M12, M16, M20, M24 and M30 or internal
sleeve sizes M8, M10, M12, M16,M20 made of
galvanised steel for use in non cracked concrete.
Internal Partition Kit of use as non-load bearing walls.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in concrete.
External thermal insulation composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal insulation Composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation.
Liquid applied Roof Waterproofing on the Basis on
Polyurethane Polymers.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
S.E.E.E. Prestressing Systems - type FUC: internal for
concrete and type FUT: internal or external for
concrete.
Post-tensioning kits for prestressing of Structures
(commonly called Post-tensioning Systems).
Fasteners for mechanically fastened flexible roof
waterproofing systems.
Binder Brettsperrholz BBS, multi-layered timber
elements for walls, ceilings, roofs and special
construction components.
Internal Partitions Kit for use as non-load bearing
walls.
External thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External thermal insulation composite systems with
rendering for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation to the walls
of buildings.
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering on
concrete and masonry.
Systems of mechanically fastened SBS modified
bitumen flexible roof waterproofing membranes.
Multilayer-systems of mechanically fastened flexible
SBS bitumen modified roof waterproofing membranes.
Multi-layer systems of mechanically fastened flexible
SBS bitumen modified roof waterproofing membranes.
Lumon 3 balcony Glazing system.
External Thermal Insulation Composite systems with
rendering for the use as external insulation of building
wall.
Prefabricated Tension Rod System.
Dywidag Bonded Post-tensioning System for 3 to 37
Strands (140 & 150 mm2).
Systems of mechanically fastened flexible roof
waterproofing membranes.
Light composite wood-based beam.
Bonded Post-tensioning kit
for
prestressing
of
structures with 2 to 22 strands.
Systems of mechanically fastened flexible roof
waterproofing membranes.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Nailed in anchor for fixing of external insulation
composite systems with rendering in concrete and
masonry.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Three Dimensional Nailing Plate (timber-to-timber
hanger).
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation of building walls (ETICS).
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation of building walls (ETICS).
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Thermal and/or acoustic insulation board made of
hemp fibres.
PLASTIKOL TKS2 as a component of the joint sealing
system of the maxit Deutschland GmbH, Mark
Deitermann used in plants for the containment,
handling and filling of substances hazardous to water.
PLASTIKOL TKS as a component of the joint sealing
system of the maxit Deutschland GmbH, marke
Deitermann use in plants for the containment, handling
and filling of substances hazardous to water.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Internal Partition Kit for use as non-load bearing walls.
Internal Partition Kit for use as non-load bearing walls.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete.
Deformation controlled expansion anchor made of
stainless steel of sizes M8x30, M10x40 and M12x50
for multiple use for non-structural applications in
concrete.
Torque controlled bonded anchor made of stainless
steel of sizes M10, M12, M16 M20 and M24 for use in
concrete.
Torque controlled bonded anchor made of galvanised
steel of sizes M10, M12, M16, M20 and M24 for use in
concrete.
Torque controlled bonded anchor made of stainless
steel 1.4529 of sizes M10, M12, M16, M20 and M24
for use in concrete.
Balcony and Terrace Glazing system.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Liquid applied roof waterproofing on the basis of
polyurethane.
Plastic piping kits for heating systems, made of PE-RT
Type I with an oxygen barrier layer.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls.
Systems of mechanically fastened SBS modified
bitumen flexible roof waterproofing membranes.
Systems of mechanically fastened SBS modified
bitumen flexible roof waterproofing membranes.
Systems of mechanically fastened SBS modified
bitumen flexible roof waterproofing membranes.
Systems of mechanically fastened SBS modified
bitumen flexible roof waterproofing membranes.
Multi-Layer systems of mechanically fastened flexible
SBS bitumen modified roof waterproofing membranes.
Multi-Layer system of mechanically fastened flexible
SBS bitumen modified roof waterproofing membranes.
Multi-layer systems of mechanically fastened flexible
SBS bitumen modified roof waterproofing membranes.
Multi-Layer systems of mechanically fastened flexible
SBS bitumen modified roof waterproofing membranes.
Liquid Applied roof waterproofing on the basis of
polyurethane.
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in non-cracked concrete.
Bonded anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in non-
cracked concrete.
Insulation Material made of loose, free cellulose fibres.
Insulation Material made of loose, free cellulose fibres.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
Concrete screw made of zinc plated steel of sizes 7,5,
10, 12, 14 and 16 for use in concrete.
Concrete screw made of stainless steel of sizes 7,5, 10
and 12 for use in concrete.
Nailed in plastic anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
External Thermal Insulation Composite System with
rendering for the use as external insulation of Building
walls.
Joint Sealing compound system used in plants for the
containment, handling and filling of substances
hazardous to water.
Joint Sealing compound system used in plants for the
containment, handling and filling of substances
hazardous to water.
HANNOBAND BG1 - Sealing kits, profiles and strips
made of foamed polyurethane plastic impregnated
bitumen or butyl.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Insulation material made of loose, free cellulose fibres.
Thermal Insulating material made of loose, free
cellulose fibres.
Thermal Insulating material made of loose, free
cellulose fibres.
Liquid applied roof waterproofing kit on the basis of
flexible reactive polymethylmethacrylate.
External thermal insulation composite system with
rendering on polystyrene for use as external insulation
of building walls.
External thermal Insulation Composite System with
Rendering on polystyrene for use as external insulation
of building walls.
Structural Sealant for use in structural sealant glazing
systems.
Liquid applied roof waterproofing on the basis on
polyurethane polymers.
Structural sealant glazing kits.
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12, M16, M20 and M24 for use in
non-cracked concrete.
Bonded Anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in no-
cracked concrete
Bonded anchor with anchor rod made of stainless steel
1.4529 of sizes M10, M12, M16, M20 and M24 for use
in non-cracked concrete.
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete.
Bonded anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in non-
cracked concrete
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete.
Bonded anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in non-
cracked concrete.
Bonded anchor with anchor rod made out of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in no-cracked concrete.
Bonded anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in non-
cracked concrete.
External Thermal Insulation Composite system with
rendering on mineral wool for the use as external
insulation of building walls (ETICS).
External Thermal Insulation Composite system with
rendering on polystyrene for the use as external
insulation of building walls (ETICS).
Homogenous building board for internal lining.
Nailed -in plastic anchors for fixing of external thermal
insulation composite systems with rendering in
masonry.
Three-dimensional nailing plate (timber-to timber/
timber-to-concrete or steel angle bracket).
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Torque-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16
for use in concrete.
Liquid Applied Roof Waterproofing Kit, based on
water dispersible polymers.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Systems of mechanically fastened flexible roof
waterproofing membranes.
External Thermal Insulation Composite systems with
rendering for the use as external insulation of building
walls.
Bonded anchor with anchor rod made of stainless steel
1.429 of sizes M10, M12, M16, M20 and M24 for use
in non-cracked concrete.
Bonded anchor (capsule type with anchor tops made of
stainless steel of sizes M10, M12, M16, M20 and M24
for use in non-cracked concrete.
Bonded anchor with anchor rod made out of stainless
steel of sizes M10, M12, M16, M20 and M24 for use in
non-cracked concrete.
Bonded anchor with anchor rod of sizes M10, M12 and
M16 made of stainless steel for use in non-cracked
concrete.
Bonded anchor with anchor rod of sizes M10, M12 and
M16 made of galvanised steel for use in non-cracked
concrete.
Bonded anchor with anchor rod made of stainless steel
of sizes M10, M12, M16 M20 and M24 for use in non-
cracked concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16
for use in concrete.
Concrete screw made of galvanised steel of sizes 8, 10,
12 and 14 for use in concrete.
Concrete screw of sizes 8, 10, 12 and 14 for use in
concrete.
Concrete screw made of stainless steel of sizes 8, 10,
12 and 14 for use in concrete.
Concrete screw made of stainless steel 1.4529 of sizes
8, 10, 12 and 14 for use in concrete.
External Thermal Insulation Composite Systems with
rendering on mineral wool for use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on expanded polystyrene for use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on mineral wool for use as external
insulation to the walls of buildings.
Spherical Bearing with special sliding material.
Bonded anchor made of galvanised steel for use in non
cracked concrete: sizes M8, M10, M12, M16, M20,
M24, M27 and M30.
Bonded Anchor made of stainless steel for use in non
cracked concrete: sizes M8, M10, M12, M16, M20,
M24, M27 and M30.
Bonded anchor made of high corrosion resistant steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20, M24, M27 and M30.
Veture kit - Prefabricated unit for external wall
insulation.
Torque controlled expansion anchor made of
galvanised steel of sizes M16, M8, M10, M12, M16
and M20 for use in non-cracked concrete.
External Thermal Insulation Composite systems with
rendering on polystyrene for the use as external
insulation to the walls of Buildings.
Solid wood slab to be used as a structural element in
buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Balcony and terrace Glazing system.
Prefabricated stair with steps and a load-bearing
handrail made of solid wood for use as an indoor stair
in buildings of category A, EN 1990:2002.
Prefabricated stair with steps and a load-bearing
handrail made of solid wood for use as an indoor stair
in buildings of category A, EN 1990:2002.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Ancon 500 Tension Rod System.
Post-tensioning kit for prestressing of structures with
internal bonded strands.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
Torque controlled expansion anchor made of stainless
steel of sizes M6, M8, M10, M12 and M16 for use in
non-cracked concrete.
External Thermal Insulation Composite systems with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Structural Sealant Glazing Systems WICSKY 3 for the
construction of non-load-bearing external walls.
Prefabricated stair with steps and a load-bearing
handrail made of solid wood for use as an indoor stair
in building of category A, EN 1990: 2002.
Torque controlled expansion anchor made of stainless
steel 1.4529/1.4565 of sizes 30 M6 and 40 M6 for
multiple use for non-structural applications in concrete.
Torque-controlled expansion anchor made of stainless
steel of sizes 30 M6 and 40 M6 for multiple use for
non-structural applications in concrete.
Single layer mechanically fastened roof-waterproofing
kit.
Double layer mechanically fastened roof-waterproofing
kit.
Concrete screw made of galvanised steel of sizes 10,5
and 12,5 for use in concrete.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Structural sealant glazing kits.
Torque-controlled expansion anchor made of stainless
steel of sizes 30 M6 and 40 M6 for multiple use for
non-structural applications in concrete.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Light Composite wood-based joists.
Post-tensioning kit for prestressing of structures with
unbonded strands for concrete.
Anchor made of galvanised steel for multiple use for
non-structural applications in concrete.
Anchor made of galvanised steel for multiple use for
non-structural applications in concrete.
Fasteners for mechanically fastened flexible roof
waterproofing systems.
Torque controlled bonded anchor made of galvanised
steel of sizes M10, M12, M16, M20 and M24 for use in
concrete.
Torque controlled bonded anchor made of stainless
steel of sizes M10, M12, M16, M20 and M24 for use in
concrete.
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
Composite waterproofing kit for roofs and construction
works.
Anchor made of galvanised steel of sizes 6 x 25 and 6 x
30 for multiple use for non-structural applications in
concrete.
Anchor made of galvanised steel of size 6 x 30 for
multiple use for non-structural applications in concrete.
Anchor made of stainless steel 1.429 of size 6 x 30 for
multiple use for non-structural applications in
Concrete.
Prefabricated stair with steps and a load-bearing
handrail made of solid wood for use as an indoor stair
in buildings of category A EN 1990: 2002.
Anchor made of galvanised steel for multiple use for
non-structural applications in concrete.
Structural Sealant Glazing Kits.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
wall.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
wall.
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Non load bearing shuttering kit "QUAD -LOCK" based
on shuttering elements of EPS.
Internal Partition kit for use as non-loadbearing walls.
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Welded gabion products.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded Injection type anchor made of galvanised steel
for use in non cracked concrete: sizes: M8, M10, M12,
M16 and M20.
Bonded Injection Type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Bonded Injection type anchor made of galvanized steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Bonded Injection type Anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Bonded Injection type Anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Fire Protective Board.
Fire Protective Board
Structural Sealant Glazing Kit for use in curtain
walling.
Light Composite wood-based beams and columns for
structural use.
Prefabricated stair with steps made of solid wood and
load-bearing bolt for use as an indoor stair in buildings
of Category A, EN 1990:2002.
Prefabricated stair with steps and a load-bearing
handrail made of solid wood for use as an indoor stair
in buildings of category A, EN 1990:2002.
Steel Beams with special joining technology.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Fire Protective Board.
Bonded anchor with anchor rod made of galvanized
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in non-cracked concrete.
Fire Protective board.
Fire Protective Board.
Special anchor for the rear fixing of facade panels
made of Fibre-cement flat sheets according to EN-
12467.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls.
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Masterflex 700 FR pouring grade black as a component
of the joint sealing system of the Degussa Bautechnik
GmbH used in plants for the containment, handling and
filing of substances hazardous to water.
Masterflex 700 FR gun grade black as a component of
the joint sealing system of the Defussa Bautechnick
GmbH used in plants for the containment, handling and
filling of substances hazardous to water
External Thermal Insulation Composite systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Post Tensioning kit for prestressing of structures.
Pre-fabricated stair with steps made of solid wood or
wood based products and load-bearing bolts for use as
an indoor stair in buildings of category A, EN
1990:2002.
Timber frame building kits for dwelling-houses and
similar structures.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Torque-controlled expansion anchor made of stainless
steel 1.4529/1.4565 of sizes 30 M6 and 40 M6 for
multiple use for non-structural applications in concrete.
Prefabricated Tension Rod System.
Structural sealant glazing kit for use in curtain walling.
Light composite wood-based beams and columns for
structural use.
Deformation-controlled expansion anchor made of
galvanised steel for multiple use for non-structural
applications in concrete.
Deformation-controlled expansion anchor made of
galvanised steel for multiple use for non-structural
applications in concrete.
Plastic nailed-in anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Deformation Controlled expansion anchor made of
stainless steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete.
Special anchor for the rear fixing of facade plates made
of resin bonded concrete stone (polymer concrete).
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
System of mechanically
fastened
flexible
roof
waterproofing membranes.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls.
Special anchor for the fixing of facade plates from their
back side made of selected natural stones according to
EN 1469.
Liquid Applied Roof Waterproofing Kits, based on
Water Dispersible polymers.
Composite Waterproofing kit on the basis of EPDM for
the waterproofing of roofs and construction works.
Composite waterproofing kit on the basis of EPDM for
the waterproofing of roofs and construction works.
Deformation-controlled expansion anchor made of
galvanised steel for multiple use for non-structural
application in concrete.
Deformation-controlled expansion anchor made of
galvanised steel for multiple use for non-structural
application in concrete.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Prefabricated stair with steps and a load-bearing
handrail made of solid wood for use as an indoor stair
in buildings of category A, EN 1990:2002.
Timber frame building kits for dwelling-houses and
similar structures.
Liquid Applied Roof Waterproofing Kit, based on
Polyurethane.
Structural Sealant Glazing kits.
Structural Sealant Glazing Kits.
External Thermal Insulation Composite System
(ETICS) with rendering on polystyrene for use as
external insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Three Dimensional Nailing plate (Joist hanger for
wood to wood connections and wood to concrete or
steel connections).
Undercut anchor of sizes M8, M10 and M12 for use in
concrete.
Bonded anchor made out of galvanised steel for use in
non cracked concrete: sizes M12, M16, M20 M24 and
M30.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Thermal insulation boards made of grass fibres.
Thermal Insulation boards made of expanded perlite,
deviating from EN 13169.
Liquid applied roof waterproofing on the basis of
polyurethane.
Concrete screw made of stainless steel of sizes 7,5, 10
and 12 for use in concrete.
Plastikol TKS 2 black as a component of the joint
sealing system of the maxit Deutschland GmbH, Marke
Deitermann, used in plants for the containing, handling
and filling of substances hazardous to water.
Plastikol TKS Schwarz/black as a component of the
joint sealing system of the maxit Deutschland GmbH
Marke Deitermann, used in plants for the containment,
handling and filling of substances hazardous to water.
Liquid applied roof waterproofing on the basis on
polyurethane polymers.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Systems of mechanically fastened flexible roof
waterproofing membranes.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in non-cracked concrete.
Closed box wood-based load-bearing stressed skin
panels for use in external and internal walls, floors and
roofs.
External Thermal Insulation Composite System with
rendering on polystyrene for use as external insulation
of building walls.
Post-tensioning kit for prestressing of structures.
Liquid applied roof waterproofing using kits based on
polyurethane.
Liquid applied roof waterproofing on the basis on
polyurethane polymers.
Systems of Mechanical
fastened
flexible
roof
waterproofing membranes.
External Thermal Insulation Composite systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
Structural sealant glazing kit for use in curtain walling.
Structural Sealant Glazing kit for use in curtain
walling.
Post-tensioning kit for prestressing of structures
Internal bonded tendons for concrete and composite
structures.
External Thermal Insulation Composite systems with
rendering on mineral wool for use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
Fasteners for Flexible roof Waterproofing membrane
system.
Systems of mechanically fastened flexible roof
waterproofing membranes.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
Rapid Setting Cement.
Non load-bearing permanent shuttering kit based on
elements of EPS.
Rapid Setting Cement.
Rapid Setting Cement.
Rapid Setting Cement.
Rapid Setting Cement.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Liquid applied roof waterproofing on basis of
polyurethane.
Torque-controlled expansion anchor made of
galvanised steel of sizes 12, 15, 18 and 25 for use in
concrete.
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
External Thermal insulation Composite systems with
rendering for the use as external insulation to the walls
of buildings.
Wood-based composite slab element for structural
purposes.
Chemical anchor for use in non-cracked concrete of
sizes M8, M10, M12, M16.
Torque controlled expansion anchor made of zinc
electroplated steel for use in non-cracked concrete of
sizes M8, M10, M12, M16 and M20 - class 8.8.
Metal Web Joists for structural purposes.
Torque-controlled metal anchor for fastening of load-
bearing components into concrete.
Insulating Concrete Form work.
Post-Tensioning kit for prestressing of structures with
bonded/unbonded tendons of 3-55 strands.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Systems with rendering on
expanded polystyrene (EPS) for the use as external
insulation of building walls.
Light Composite wood-based beam.
Non Load-bearing permanent shuttering kit based on
panels of insulating material.
Nailed-in plastic anchors for fixing of external thermal
insulation composite systems with rendering on
concrete and masonry.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Three-Dimensional nailing plate (timber to timber joist
hangers).
Special Cement CEM III/A with high sulfate
resistance.
Variable concealed three part hinges "TECTUS TE 510
HU" and "TECTUS TE 510 3D".
Internal bonded or unbonded bar post-tensioning kit
using high tensile plain bar 25mm - 40mm and ribbed
bar 25mm - 50 mm.
Torque Controlled expansion anchor for use in non
cracked concrete: sizes: dia 12.
Anchor made of galvanised steel of sizes 6 x 25 for
multiple use for non-structural applications in concrete.
Joint sealing system used in plants for the containment,
handling and filling of substances hazardous to water.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Three-Dimensional nailing plate (timber to timber
cantilever bracket).
External Thermal Insulation Composite system with
rendering for use as external insulation of building
walls.
Three-dimensional Nailing plates.
Liquid Applied roof waterproofing on the basis of
polyurethane.
Plastics piping kits for the transport system of hot and
cold water, made or PE-RT Type II.
External Thermal Insulation Composite systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Bonded anchor with anchor rod made of stainless steel
of sizes M8, M10, M12, M16, M20 and M24 for use in
non-cracked concrete.
Three-dimensional
nailing
plate
(timber-to-timber
angle bracket).
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M8, M10, M12, M16 and M20.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M8, M10, M12 M16 and M20.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non-cracked concrete: sizes
M8, M10, M12, M16 and M20.
Prefabricated stair with steps and a load-bearing
handrail of solid wood for use as an indoor stair in
buildings of category A, EN 1990:2002.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Non-Load bearing partition kits for dry rooms.
Impregnated joint sealing tape made of foamed
polyurethane for sealing joints around windows and in
facades.
Impregnated joint sealing tape made of foamed
polyurethane for sealing joints around windows and in
facades.
Impregnated joint sealing tape of foamed polyurethane
for sealing joints around windows and facades.
Liquid Applied roof waterproofing kits, based on water
dispersible polymers.
External thermal insulation composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of Buildings.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
Liquid Applied roof waterproofing on the basis of
polyurethane.
Plastic piping kits for the transport system of hot and
cold water made of PE-RT Type II.
External Thermal Insulation Composite System with
rendering on expanded polystyrene (EPS) for the use as
external insulation of building walls.
Liquid Applied roof waterproofing on the basis of
polyurethane.
Concrete screw made of galvanised steel of sizes 8, 10,
12 and 14 for use in concrete.
Loose wood shavings as thermal insulation material.
KNAUF gypsum fibre board.
Cement-bonded reinforced lightweight concrete board
to be used as building board for non-load-bearing
internal partitions, as lining of building components in
indoor, as lathing boards for facades (ventilated
too)and for suspended ceilings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal insulation Composite system with
rendering for the use as external insulation of building
walls.
Systems of mechanically fastened flexible roof
waterproofing.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Injection type anchor made of galvanised steel for use
in non cracked concrete; sizes M8, M10, M12, M16
and M20.
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
Concrete screw made of galvanised steel of sizes 10
and 12 for use in concrete.
Internal Partitions Kit for use as no-loadbearing walls.
Internal Partitions Kit for use as no-loadbearing walls.
Non load bearing shuttering kit "ARGISOL" based on
shuttering elements of EPS.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External Thermal Insulation Composite Systems
5ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Liquid applied roof waterproofing on the basis on
polyurethane polymers.
Torque Controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in non-cracked concrete.
Systems of flexible roof waterproofing composed by
flexible membranes made with Thermoplastics
Poliofenic plastics (TPO).
External Thermal Insulation Composite System with
rendering for the use as external insulation off building
walls.
Non load bearing permanent shuttering kit "IZODOM
2000 POLSKA" based on shuttering elements of foam
material (EPS and Neopor).
External thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external thermal insulation to the walls of buildings.
Structural Sealant Glazing Kit for the use in curtain
walling.
Plastic anchor for multiple use in concrete and masonry
for non-structural applications.
External thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering.
SABA Sealer Field, Joint sealing system used in plants
for the containment, handling and filling of substances
hazardous to water.
Concealed Beam Hangers for connection of solid wood
or wood based elements to solid wood or wood based,
or concrete support.
Load-bearing-bolt stair with steps made of natural
stone or artificial stone for use as an indoor stair in
buildings of category A, EN 1990:2002.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Liquid Applied Roof Waterproofing Kit, based on hot
applied polymer modified bitumen.
Deformation-controlled expansion anchor of sizes M6,
M8, M10, M12, M16 and M20 for use in non-cracked
concrete.
Light Composite wood-based beam.
Universal brackets, purlin and joist anchors for
connection of solid wood or wood based elements to
solid wood or wood based support.
Anchor made of galvanised steel for multiple use for
non-structural applications in concrete.
Plastic nailed-in anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Plastic nailed-in anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
Prefabricated mineral wool boards with organic of
inorganic finish and with specified fastening system
Deformation-controlled expansion anchor of sizes M6,
M8, M10 and M12 for multiple use for non-structural
applications in concrete.
Torque controlled expansion thread anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16.
Deformation-controlled expansion anchor made of
galvanised steel for multiple use for non-structural
applications in concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
wall.
External thermal insulation Composite system with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation t the walls of buildings.
Special anchor for the rear fixing of facade panels
made of fibre-cement flat sheets according to EN
12467.
Face mount hangers for supporting solid wood or wood
based elements to solid wood, wood based or concrete
support.
Bonded injection type anchor with anchor rod sizes
M8, M10, M12, M16, M20 and M30 or internal sleeve
sizes M8, M10, M12 and M16 made of stainless steel
for use in non cracked concrete.
Bonded injection type anchor with anchor rod sizes
M8, M10, M12, M16, M20, M24 and M30 or internal
sleeve sizes M8, M10, M12, M16 and M20, made of
galvanised steel for use in non cracked concrete.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Sto Therm Classic 1 MW/MW-L External Thermal
Insulation Composite Systems with rendering.
Special cement CEM III/A with high sulfate resistance.
External thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
Internal partition Kit for use as non-load-bearing walls.
External Thermal insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Metal Web Joist for Structural Purposes.
External Thermal Insulation composite System with
rendering on expanded polystyrene (EPS) for the use as
external insulation of building walls.
External Thermal Insulation Composite System with
rendering on expanded polystyrene (EPS) for the use as
external insulation of building walls.
Liquid Applied Roof Waterproofing Kit, based on
polyurethane.
External Thermal Insulation Composites Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10 and M16 for use in
no-cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Post-tensioning
kit
for
external
prestressing
of
structures.
Pile pipes made of ductile iron.
Light composite wood-based beam.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Cement -bonded board for use in no-loadbearing
internal partitions as lining of interior components, for
suspended ceilings in indoor/outdoor applications and
as lathing board for facades.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Fire Protective Board.
Watertight membrane in combination with covering
tiles for wet areas and swimming pools under outdoor
and indoor conditions.
DULUX Therm P External Thermal Insulation
Composite Systems with rendering.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composites System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls.
Non load-bearing permanent shuttering system based
on hollow blocks of insulating materials and concrete.
External Thermal Insulation Composite systems with
rendering on polystyrene for use as external insulation
to the walls of buildings.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
Type II addition for production of concrete, including
in particular cast-in-situ or prefabricated structural
concrete conforming to European Standard EN 206-1.
External Thermal Insulation Composite Systems
(ETICS) with rendering on polystyrene for the use as
external insulation to the walls of buildings.
Prefabricated Stair Kit.
Three-dimensional
nailing
plate
(timber-to-
timber/timber-to-concrete angle bracket).
Injection System with anchor rod of sizes M10, M12
and M16 for use in non-cracked concrete.
Bonded anchor (injection type) with anchor rod of sizes
M8, M10, M12, M16 and M24 for use in non-cracked
concrete.
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
Bonded anchor (injection type) with anchor rod of sizes
M8, M10, M12, M16, M20 and M24 for use in non-
cracked concrete.
Timber Frame Building Kit.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
Non load bearing shuttering kit "isorast" based on
shuttering elements of EPS.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12, M16 and M20
for use in non-cracked concrete.
Three Dimensional nailing plate (timber
-to-
timber/timber-to-concrete angle bracket).
Thermal and/or acoustic insulation board made of
hemp/kenaf fibres.
Thermal and/or acoustic insulation mat made of sheep
wool.
Prefabricated tension rod system.
Plastic anchor for multiple use and masonry for non-
structural applications.
Advanced
polymer-sleeved,
torque-controlled
expansion anchor in sizes of M6, M8, M and M12 for
use in non-cracked concrete.
Nailed-in and screwed-in anchors plastic for fixing of
external thermal insulation composite systems with
rendering in masonry.
Water based white acrylic paint without premix glass
beads requiring drop-on materials to be used on
trafficked areas.
White acrylic paint without premix glass beads
requiring drop-on materials to be used on trafficked
areas.
Thermoplastic with premix glass beads requiring drop-
on materials to be used on trafficked areas as a
structured (profiled) road marking.
White acrylic paint without premix glass beads
requiring drop-on materials to be used on trafficked
areas.
Cold plastic with out premix glass beads not requiring
drop-o to be used in trafficked areas.
White thermoplastic with premix glass beads requiring
drop-on materials to be used on trafficked areas.
White water based paint without premix glass beads
requiring drop-on materials to be used on trafficked
areas.
White thermoplastic with premix glass beads requiring
drop-on materials to be used on trafficked areas.
White alkyd paint without premix glass beads requiring
drop-on materials to be used on trafficked areas.
White thermoplastic with premix glass beads requiring
drop-on materials to be used on trafficked areas.
White acrylic paint without premix glass beads
requiring drop-on materials to be used on trafficked to
areas.
Cold plastic without premix glass beads not requiring
drop-on materials to be used on trafficked areas.
Simpson Strong-Tie truss hanger types: ET, ETC,
MTHM, MTHM2, THJA26 and THG.
Non-load bearing permanent shuttering kit "kern-
bausysteme" based on shuttering elements of EPS
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
wall.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
wall.
Prefabricated stair kit.
Prefabricated stair kit.
Liquid Applied Roof Waterproofing Kits, based on
Water Dispersible polymers.
Liquid Applied roof waterproofing on the basis of
polyurethane.
Liquid Applied roof waterproofing on the basis of
polyurethane.
Self supporting composite panels for wall claddings.
Three-dimensional nailing plate (connector for wood to
wood connections and wood to concrete or steel
connections).
Torque controlled expansion anchor made of stainless
steel of sizes M6, M8, M10 M12, M16 and M20 for
use in non-cracked concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in no-cracked concrete.
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12, M16 and M20 for use in
concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12, M16, M20
and M24 for use in concrete.
Deformation-controlled expansion anchor made of
stainless steel of high corrosion resistant steel of sizes
M6, M8, M10, M12, M16 and M20 for use in non-
cracked concrete.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
Deformation-controlled expansion anchor made of
stainless steel of high corrosion resistant steel of sizes
M6, M8, M10 and M12 for multiple use for non-
structural applications in concrete.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete.
Bonded anchor with anchor rod of sizes M10, M12 and
M16 made of galvanised steel for use in non-cracked
concrete.
Torque controlled bonded anchor with anchor rod made
of stainless steel of sizes M8, M10, M12, M16, M20
and M24 for use in concrete.
Bonded anchor with anchor rod of sizes M8, M10,
M12, M16, M20 and M24 for use in non-cracked
concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Torque-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16
for use in concrete.
Bonded anchor for use in concrete: Threaded rod M8 to
M20, International threaded element HIS-N M8 to
M20, Reinforcement bar BSt 500 dia 8 to dia 32.
Bonded anchor in the size of dia 8 mm to die 32 mm
for use in concrete
System of mechanically
fastened
flexible
roof
waterproofing membranes.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Low bitumen
mass
Shingles
with
mineral
reinforcement.
Low Bitumen
mass
shingles
with
mineral
reinforcement.
Low Bitumen
mass
shingles
with
mineral
reinforcement.
Low Bitumen
mass
shingles
with
mineral
reinforcement.
External Thermal insulation composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Special grout for the injection of ducts for prestressing.
Liquid Applied Roof Waterproofing on the basis on
polyurethane polymers.
Plastic anchors for fixing of External Thermal
Insulation Composite System with rendering.
Micro-prismatic retro-reflective sheeting for traffic
signs.
Timber Frame Building Kits.
External Thermal Insulation Composite System
(ETICS) with rendering on mineral wool used as
external insulation to the walls of buildings.
Plastic piping kits for the transport system of hot and
cold water, made of PE-RT Type II.
Plastic piping kits for the transport system of hot and
cold water, made of PE-RT Type II.
Three-dimensional nailing plates.
External Thermal Insulation Composite systems with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Three dimensional Nailing plates.
Joist Hanger for structural purposes.
Nailed-in anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Screwed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Three-dimensional nailing plate (connector for wood to
wood connections).
Nailed-in anchors plastic for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Liquid Applied roof waterproofing on the basis of
polyurethane.
Liquid Applied roof waterproofing on the basis of
polyurethane
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Fire Protective Board.
Fire Protective Board
Prefabricated stair with steps and risers made of wood-
based panels for use as an indoor stair in building of
category A, EN 1990:2002.
Post-Installed rebar Connections dia 8 to dia 28 with
MKT Injection Adhesive VME.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Structural Sealant Glazing Kits.
Internal partition kits for use as non-loadbearing walls.
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in non-cracked concrete.
Liquid Applied roof waterproofing on the Basis of
acrylic solution.
External thermal Insulation Composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Internal partition kit for use as non-loadbearing walls.
Post-Installed rebar Connection dia 8 mm to dia 28 mm
with MKT Adhesive VM-ME.
Simpson Strong-Tie Hold Downs type HTT/LTT,
HDA, Bracket KR, 160x50x3, 0x40, 190/290x50x2,
0x40, Tension Ties, Tension Ties 2 parts, Concrete
Anchor Strap, UB Anchor, Profile Anchor.
Thermal and/or acoustic insulation mats and rolls made
of sheep wool.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Three-dimensional Nailing Plates.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Torque-controlled expansion anchor (ETAG 001-1
Option 7).
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Low bitumen
mass
shingles
with
mineral
reinforcement.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Bonded anchor with anchor rod of sizes M8, M10,
M12, M16, M20 and M24 for use in non-cracked
concrete.
Bonded anchor with anchor rod of sizes M8, M10,
M12, M16, M20 and M24 for use in non-cracked
concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16
for use in concrete.
Torque controlled expansion anchor made of stainless
steel of sizes M6, M8, M10, M12, M16 and M20 for
use in non-cracked concrete.
Internal Partition Kits for use as non-loadbearing walls.
Plastics piping kits for the transport system of hot and
cold water, made of PE-RT Type II.
Plastic Piping kits for the transport system of hot and
cold water, made of PE-RT Type II.
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Plastic anchor for multiple use in concrete and masonry
for non-structural applications.
Plastic anchor for multiple use in concrete and masonry
for non-structural applications.
Solid Wood Slabs.
Bonded Injection type anchor made of galvanised steel
for use in non cracked concrete: M8, M10, M12, M16
and M20.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Insulation material made of loose, free cellulose fibres.
Internal Bonded Strand Post-tensioning System VBT-
KI 4 to 19.
Silicone based sealant to be used as outer seal for
structural and non structural insulating glass used in
structural sealant glazing system (SSGS).
Z-Bau sealing construction for sealing areas made of
liquid tight pre-fabricated elements used in facilities to
deal with liquid chemicals (substances hazardous to
water).
Three-dimensional nailing plate (timber to timber
cantilever bracket).
Three-dimensional nailing plate (Joist hanger for wood
to wood connections and wood to concrete or steel
connections).
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Thermal Insulation material made of loose, free
cellulose fibres.
Log Building Kits.
Post-tensioning kit for prestressing of structures.
Type II addition for production of concrete, including
in particular cast-in-situ or prefabricated structural
concrete conforming to European standard EN 206-1.
Fly ash according to this ETA may also be used in
mortars and grouts.
Ventilation opening device with acoustic damping for
use in a façade.
Thermal and acoustic insulation for building.
Hydraulic binder based on granulated blast furnace slag
for production of mortars, grouts concrete, including in
particular cast-in-situ or prefabricated structural
concrete conforming to European Standard EN 206-1.
Self-supporting composite leightweight panels for use
as sheating system in pitched roofs.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Log Building Kit.
Non-loadbearing permanent shuttering kits based on
hollow blocks of wood-chips aggregate.
External thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
THERMOMASTER B 03 External Thermal Insulation
Composite Systems with rendering.
Rapid Setting Cement.
Three-dimensional nailing plate (connectors for wood
to wood connections).
Thermal Insulation material made of loose free
cellulose fibres.
Internal partition Kits for use as non-load-bearing.
Structural sealant Glazing Kits.
Fasteners for flexible roof waterproofing systems.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
T-headed reinforcement steel bars.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Prefabricated Tension Rod System.
Prefabricated Tension Rod System.
SPIT powder actuated fasteners HSBR 14, HSBR 14
Tube and HSBR 14 Strip in combination with SPIT
fastening tools P230, P230L, P525L and P560 for
fastening of steel sheeting to steel members.
Type II addition for production of concrete, including
in particular cast-in-situ or prefabricated structural
concrete conforming to European Standard EN 206-1.
Fly ash according to this ETA may also be used in
mortars and grouts.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
External thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
External thermal insulation composite system with
rendering for the use as external insulation of building
walls.
Pre-fabricated stair with steps made of wood-based
products and load-bearing bolts for use as an indoor
stair in buildings of category A, EN 1990:2002.
External thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Three-dimensional nailing plate (joist hanger for wood
to wood connections and wood to concrete).
Internal Partitions kit for use as non-loadbearing walls.
Prefabricated stair with steps and risers made of wood-
based products for use as an indoor stair in buildings of
category A, EN 1990:2002.
Self supporting composite light weight panels for use
in roofs.
Structural Sealant glazing Kits.
Torque-controlled expansion anchor for use in non-
cracked concrete.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Bonded anchor for use in non-cracked concrete;
Threaded rod of sizes M8 to M30; Internal threaded
anchor RG MI of sizes M8 to M20.
Bonded anchor (Injection type) with anchor rod of
sizes M10, M12 and m16 for use in non-cracked
concrete.
Three-Dimensional nailing plate (Joist hanger for wood
to wood connections and wood to concrete or steel
connections).
Three-dimensional nailing plate (angle bracket for
wood to wood connections).
Bonded injection type anchor made of galvanized steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Anchor made of galvanised steel for multiple use for
non-structural applications in concrete.
Anchor made of galvanised steel for multiple use for
non-structural applications in concrete.
Bonded anchor (injection system) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete.
Fasteners for flexible roof waterproofing systems.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation to the walls
of buildings.
Three-dimensional nailing plate (Joist hanger for wood
to wood connections and wood to concrete or steel
connections).
RENOTHERM External Thermal Insulation Composite
Systems with rendering.
Three-dimensional nailing plate (timber-to-timber joist
hanger).
Bonded anchor (Injection System) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete.
Liquid applied roof waterproofing kit on the basis of
polyurethane.
TFV Metal Anchors for Use in Concrete.
Bonded anchor (Injection system) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete.
Permanent Shuttering system made of polystyrene.
Fire protection of loadbearing steel structure.
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Timber frame Kits.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Structural sealant Glazing System SG – Steindl.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
Micro-prismatic retro-reflective sheeting for traffic
signs.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
Post-installed rebar connections with Hilti injection
mortar HIT-RE 500.
Post-installed rebar connections with Hilti injection
mortar HIT-RE 500.
Spherical Bearing with special sliding material.
BTE Stelcon Sealing construction for sealing areas
made of pre fabricated elements made of concrete used
in facilities to deal with liquid chemicals (substances
hazardous to water).
Non loadbearing permanent shuttering kits based on
panels made of EPS linked in site with plastic spacers.
Bonded anchor in sizes of M8to M30 for use in non-
cracked concrete.
DEUTAG sealing system WEST used in facilities for
storage, filling and handling of liquid chemicals
(substances hazardous to water).
System of mechanically fastened roof waterproofing
membranes.
System of mechanically fastened roof waterproofing
membranes.
VBT- Post-tensioning kit for prestressing of structures
with internal unbonded 1 to 6 strands.
One Component bitumen - polyurethane resin for
flashing application applied directly to bitumen
waterproofing membrane used in the horizontal part of
the roof.
Spherical bearing with special sliding material.
External Thermal Insulation Composite System with
rendering for the use as external thermal insulation of
building walls.
Variable concealed three part hinges "TECTUS TE210
3D" and "TECTUS TE 310 3D".
Timber Frame Building Kits for low-rise housing and
similar building structures.
Low Bitumen
mass
shingles
with
mineral
reinforcement.
Low Bitumen mass shingle with mineral reinforcement.
Concrete screw made of galvanised steel of sizes 10, 12
and for use in concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
rendering for use as external insulation to the walls of
buildings.
Post-tensioning kit for prestressing of structures.
Thermal Insulation board made of mineral material.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Balcony and terrace glazing system.
Fire protective board.
Fire protective board.
External Thermal Insulation Composite systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
FASADEN UNIVER BAU MINERAL External
Thermal Insulation Composite Systems with rendering.
Prefabricated stair with steps made of solid wood and
load-bearing bolds for use as an indoor stair in
buildings of category A EN 1990:2002.
Non-load bearing permanent shuttering system with
plates of wood cheep aggregate concrete.
CEMIX THERM M External Thermal Insulation
Composite Systems with rendering.
CEMIX THERM M External Thermal Insulation
Composite Systems with rendering.
Thermal and Acoustic Insulation for Building.
Laminated low bitumen mass shingles with mineral
reinforcement.
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in non-cracked concrete.
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in non-cracked concrete.
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in non-cracked concrete.
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and 24 for use
in non-cracked concrete.
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in non-cracked concrete.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Bonded injection type anchor made of stainless steel
for use in non-cracked concrete: sizes M8, M10, M12,
M16 and M20.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Fibre gypsum boards used for planking and lining of
building components.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
TRIACTIF Thermal insulating products.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Product with radiant heat reflective component for use
in thermal insualtion systems of buildings envelopes.
Fire Protective Board.
Fire Protective Boards.
Fire Protective Board.
Three-dimensional nailing plate (angle Bracket for
wood-to-wood connections).
Torque controlled expansion anchor made of zinc
plated steel of size M6, M8, M10, M12, M14, M16 and
M20 for use in non-cracked concrete only.
Purlin tie for timber-to-timber connections (timber-to-
timber purlin tie).
Three-dimensional nailing plate (joist hanger for wood
to wood connections and wood to concrete or steel
connections).
Nailed in plastic anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and in masonry.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in concrete.
Bonded anchor (injection system) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete.
Bonded anchor (Injection system) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete.
Bonded anchor (injection system) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete.
Timber frame building kits based on prefabricated
house modules.
Plastic sheet "Maichenplast U 1.5 mm” for the lining of
collecting basins an collecting rooms for the storage of
liquids hazardous to water.
REVCO ALFA External Thermal Insulation Composite
Systems with rendering.
External thermal insulation composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Three-dimensional Nailing plate (angle bracket for
wood to wood connections).
Three-dimensional nailing plates (joist hangers for
wood to wood connections and wood to concrete or
steel connections).
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Sparrenpfettenanker rechts/links 170, 210 und 252,
universal 170, 240 und 250 und beidseiting 170, 210
und 250 Three-dimensional Nailing Plates.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Plastic anchor for multiple use in concrete and masonry
for non-structural applications.
Plastic anchor for multiple use in concrete and masonry
for non-structural applications.
Plastic Anchor for multiple use in concrete and
masonry for non-structural applications.
Plastic anchor for multiple use in concrete and masonry
for non-structural applications.
External thermal insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Three-dimensional Nailing plates (purlin anchor for
timber to timber connections).
DEUTAG Sealing System EAST used in facilities for
storage, filling and handling of liquid chemicals
(substances hazardous to water).
DEUTAG Sealing system NORTH used in facilities for
storage, filling and handling of liquid chemicals
(substances hazardous to water).
External thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Guttatec 3 Tab, Guttatec 4 Tab, Guttatec beaver and
Guttatec Diamant Bitumen shingles with mineral or
synthetic reinforcement.
Zinc-plated steel deformation-controlled expansion
anchor in sizes of M8, M10 and M12 for use in non-
cracked concrete.
External Thermal insulation Composite Systems with
rendering.
Reactive Coating for the fire Protection of Structural
Steel.
Post installed rebar connections diameter 8 to 32 mm
made with SPIT EPOBAR injection mortar.
Post installed rebar connections diameter 8 to 25 mm
made with Hilti HIT-HY 150 MAX injection mortar.
Three-dimensional nailing plate (Purlin tie for timber-
to-timber connections).
Nailed- in plastic anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and in masonry.
Liquid Applied roof waterprooofing on the basis of
water dispersible polymers.
Torque Controlled Expansion Anchor for use in non-
cracked concrete.
Torque Controlled Expansion Anchor for use in non-
cracked concrete.
Variable concealed three part hinges: DX 3-D; DX 61
3-D; DX 62 3-D;DX 100 3-D; DX 101 3-D; DX 101
EBS 3-D, DX 102 3-D; DXS 100 3-D; DXS 101 3-D;
DXS 1002 3-D; DX 200 3-D; DX 200 EBS 3-D.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Temporary or permanent penetration seal.
Three-dimensional nailing plate (angle bracket for
wood to wood connections and timber-to-steel
connections).
Three-dimensional nailing plate (angle bracket for
wood to wood connections).
Three dimensional nailing plates (Joist hanger for wood
to wood connections).
Structural sealant glazing for use in curtain walling.
Bonded anchor (injection system) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete.
Pre-fabricated stair with steps made of solid wood and
load-bearing bolts for use as an indoor stair in buildings
of cat A, EN 1990:2002.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
External Thermal Insulation for Composite System
with rendering on polystyrene for the use as external
insulation to the walls of buildings.
Timber frame Building Kit.
External thermal Insulation Composite System with
rendering on mineral wool (MW) for the use as
external insulation of building walls.
Strikotherm 100-200 GW PLUS EPS External Thermal
Insulation Composite Systems with rendering.
Light Composite wood-based beam for structural
purposes.
BALMINERAL
External
Thermal
Insulation
Composite Systems with rendering.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External thermal insulation Composite System with
rendering on mineral wool (MW) for the use as
external insulation of building walls.
External thermal Insulation Composite System with
rendering on expanded polystyrene (EPS) for the use as
external insulation of building walls.
Torque Controlled expansion anchor made of
galvanised steel of size M10 for use in non-cracked
concrete.
K-A-L-M bonded anchor VPK-SF.
Liquid Applied roof waterproofing on the basis of
water dispersible polymers.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non-cracked concrete: sizes
M8, M10, M12, M16 and M20.
Boards made of agglomerated natural cork for thermal
and acoustic insulation.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation to the walls
of buildings.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar d8 to d32 for use in non-cracked concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar d8 to d32 for use in non-cracked concrete.
Solid wood slab element to be used as structural
element in Buildings.
Solid wood slab element to be used as structural
element in Buildings.
Fasteners for systems of mechanically fastened flexible
roof waterproofing membranes.
Prefabricated helical stair kits.
Liquid applied roof waterproofing kit, based on
polymer modified bitumen emulsions and solutions.
Solid wood slab elements to be used as structural
elements in buildings.
Timber frame building kit.
Pre-compressed Sealing tape.
PROMATECT –T Fire Protective Products.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External thermal Insulation Composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Impregnated joint sealing tape made of foamed
polyurethane for sealing joints around windows and in
facades.
Liquid applied watertight covering for wet rooms with
wearing surface.
Liquid Applied roof waterproofing system on the basis
of polyurethane for use on roofs, terraces and
balconies.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Low bitumen
mass
shingles
with
mineral
reinforcement.
System of mechanically
fastened
flexible
roof
waterproofing membrane.
Internal Partition kit for use as non-loadbearing walls.
Three dimensional nailing plates (Timber-concrete
steel anchor for timber to concrete connections).
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Fasteners for flexible roof waterproofing membranes.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Three-dimensional nailing plate (joist hanger for wood
to wood connections and wood to concrete or steel
connections).
Roof waterproofing "Concrete power Seal thix".
Post-installed rebar connections with fischer injection
mortar FIS-V or FIS-VS.
Screwed-in plastic anchors for fixing of external
thermal insulation composite systems with rendering in
concrete and masonry.
PROXAN Sealing band system FB-25 used in facilities
for the storage, handling and filling of liquid chemicals
(substances hazardous to water).
Internal partitions kit for use as non-loadbearing walls.
Internal partitions kit for use as non-loadbearing walls.
Liquid Applied Roof Waterproofing Kits, based on
Water Dispersible polymers.
Solid wood slab elements to be used as structural
element in buildings.
Copper plumbing tube with polyethylene covering type
Q-tec.
External thermal Insulation Composite systems with
rendering for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation to the walls
of buildings.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in concrete.
Torque controlled expansion anchors of sizes M8,
M10, M12 and M16 for use in concrete.
Kit for rock and soil nails - Kit with hollow-core bars
for self-drilling nails.
Plastic anchor for multiple use in concrete and masonry
for non-structural applications.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete sizes: M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete size: M8, M10, M12,
M16, M20 and M24.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Gabion products made of welded or woven /twisted
mesh.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation to the walls
of buildings.
Point Fasteners.
Fasteners for mechanically fastened flexible roof
waterproofing systems.
Structural sealant for use in structural sealant glazing
systems.
Retro-reflective optical elements containing high
refractive index beads or blends thereof. For use as
drop-on materials on road markings for trafficked
areas.
Structural Sealant Glazing Kit for the use in curtain
walling.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
wall.
Bonded Anchor with anchor rod of sizes M8 to M30 or
rebar d8 to d32 for use in non-cracked concrete.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded Injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
External Thermal Insulation Composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Plastic piping kits for the transport system of hot and
cold water, made of PE-RT type II.
Self-Supporting composite lightweight panels for use
in roofs.
Liquid applied roof waterproofing on the basis of water
dispersible polymers.
Liquid applied roof waterproofing kit based on water
dispersible polymers.
Liquid applied roof waterproofing kit on the basis of
water dispersible polymers.
Liquid applied roof waterproofing kit on the basis of
water dispersible polymers.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
External thermal Insulation Composite Systems with
rendering for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Liquid Applied roof waterproofing kits, based on
polyurethane.
External Insulation System for facades.
Concrete screw made of stainless steel of sizes 6, 8, 10
and 14 for use in concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded injection type anchor for use in non cracked
concrete: sizes M8, M10, M12 and M16.
Concealed beam hangers for connection of solid wood
or wood based elements to solid wood or wood based
support.
In-situ formed loose fill thermal insulation material
made of vegetable or animal fibres.
Tec Tem Insulation Board Indoor.
Screwed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Insulation support metal nail KEW TSD-V 8 and KEW
TSD-V WS.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Kit for system chimneys with clay/ceramic flue liner T
400 N1 W 3 G50.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Fasteners for flexible roof waterproofing membranes.
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering on mineral wool (MW) for the use as
external insulation of building walls.
Torque Controlled expansion anchor for use in non-
cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Nailed-in anchor for fixing of external insulation
composite systems with rendering in concrete and
masonry.
Torque-controlled expansion anchor, made of stainless
steel, for use in concrete: sizes M8, M10, M12 and
M16.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M8, M10, M12, M16 and M20.
Insulation material made of granulated polystyrene
foam and compound for impact sound insulation.
Zinc-plated torque-controlled expansion anchor in sizes
of M8, M10, M12, M16 and M20 for use in non-
cracked concrete.
Plastic-nailed in anchors for fixing of external thermal
insulation composite systems with rendering in
concrete.
Bonded anchor in the size of dia 8 to dia 32 for use in
non-cracked concrete.
Prefabricated Mineral wool boards with organic or
inorganic finish and with specified fastening system.
Haas Fertighaus Timber Frame Building Kit.
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete.
Bonded anchor (injection system) with anchor rod of
sizes M10, M12 and M16 for use in no-cracked
concrete.
Bonded anchor with anchor rod of sizes M8, M10,
M12, M16, M20 and M24 for use in non-cracked
concrete.
External thermal Insulation Composites System with
rendering on glass mineral wool for the use as external
insulation to the walls of buildings.
Metal frame building kit for construction of detached
single family, row and multifamily buildings maximum
ground + three floors.
Bonded anchor with anchor rod of sizes M8, M10,
M12, M16, M20 and M24 for use in non-cracked
concrete.
Liquid applied Roof Waterproofing Kit, based on
Polyurethane.
Bonded Injection type anchor for use in cracked and
non cracked concrete: sizes M8 to M30.
Bonded Injection type anchor for use in cracked and
non cracked concrete: sizes M8 to M30.
Angular bracket for structural purposes.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
Bonded injection type anchor made of galvanised steel
for use in non-cracked concrete: sizes M8, M10, M16,
M20 and M24.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete sizes M8, M10, M12,
M16, M20 and M24.
Bonded Injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12
and M16.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12
and M16.
Bonded Injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 M20 and M24.
Non load-bearing permanent shuttering kits based on
shuttering elements of insulating materials.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded anchor for use in non cracked concrete: sizes
M8, M10, M12, M16, M20 and M24.
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M16,
M20 and M24.
Metal web Joist for Structural purposes.
Cullens FFI, TFI, UI, HI, VS, VRC and I-Clip
Connectors.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite with rendering
for the use as external insulation of building walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded anchor (injection system) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar d8 to d32 for use in non-cracked concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar d8 to d32 for use in non-cracked concrete.
Bonded injection type anchor for use in non cracked
concrete: sizes M8, M10, M12 and M16.
Bonded injection type anchor for use in non cracked
concrete: sizes M8, M10, M12 and M16.
System of mechanically
fastened
flexible
roof
waterproofing membrane.
Bonded anchor in the size of dia 8mm to dia 32 mm for
use in concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar d8 to d32 for use in no-cracked concrete.
Bonded Anchor with anchor rod of sizes M8 toM30 or
rebar d8 to d32 for use in non-cracked concrete.
Bonded Anchor with Anchor rod of sizes M8 to M30
or rebar d8 to d32 for use in non-cracked concrete.
Bonded Anchor with Anchor rod of sizes M8 to M30
or rebar d8 to d32 for use in non-cracked concrete.
Plastic Piping Kits for the transport system of hot and
cold water, made of PE-RT Type II.
Torque controlled expansion anchor made of stainless
steel for use in non cracked concrete: size M8, M10,
M12 and M16.
Torque controlled expansion anchor made of zinc
platted steel of sizes M6, M8, M10, M12, M14, M1 and
M20 for use in non cracked concrete only.
Low Bitumen
mass
shingles
with
mineral
reinforcement.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24.
Nailed-in plastic anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Special anchor for the rear fixing of facade panels
made of high-pressure decorative laminates (HPL)
according the EN 438-7.
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering for use as external insulation of building
walls.
Prefabricated stair with steps and a load-bearing
handrail made of solid wood for use as an indoor stair.
Internal Partition Kit for use as non-loadbearing walls.
Internal partition kit for use as no-loadbearing walls.
Prefabricated stair with steps made of solid wood for
use as indoor stair in buildings of category A according
to EN 1990:2002.
Anchor made of galvanised steel, for multiple use for
non structural application in concrete.
Bonded and unbonded mono-strand System (1E15 -
1EX15).
Bonded strand Post-tensioning system with 4 to 27
Strands, series M15 and D15 (4M15 - 7M15 - 9M15 -
12M15 - 15M15 -
19-M15 - 22M15 - 27M15)
(4D15 - 7D15 - 9D15 - 12D15 - 15D15 - 19D15 -
22D15 - 27D15).
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Three-dimensional nailing plate (joist hanger for wood
to wood connections and wood to concrete or steel
connections).
Liquid applied roof waterproofing kit on the basis of
polymer modified bitumen emulsions.
Liquid Applied Roof Waterproofing Kits on the basis
of polymer-modified bitumen.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Boards made of a mixture of cellulose and flax fibres
for airborne sound insulation.
Three-dimensional nailing plate (Joist hanger for wood
to wood connections and wood to concrete or steel
connections).
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
Thermal Insulation product made of flax fibres.
Acrylic Foam tape for structural tape glazing kits.
Acrylic Foam tape for structural tape glazing kits.
Bonded anchor with anchor rod of sizes M8, M10,
M12, M16, M20 and M24 for use in non-cracked
concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Polyethylene membrane in combination with covering
tiles for wet areas under outdoor and indoor conditions.
External Thermal Insulation Composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External thermal Insulation Composite System with
rendering on mineral wool slabs for the use as external
insulation to the walls of buildings.
External thermal Insulation Composites System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Timber Frame building kit for construction of detached
single-family two storey houses maximum ground +
top floor.
External thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
Internal Partitions Kit for use as non-loadbearing walls.
Light Composite Wood based Beams for structural
purposes.
Light Composite Wood based Beams for structural
purposes.
Cross Laminated Timber (CLT) - Solid wood slab
elements to be used as structural elements in buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Post Installed rebar connections diameter 8 to 32 mm
made with EASF injection mortar.
Bonded anchor in the size of dia 8 mm to dia 32 mm
for use in concrete.
Veture kit - Prefabricated unit for external wall
insulation.
External thermal insulation composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External thermal Insulation composite System with
rendering for the use as external insulation ob building
walls.
External thermal Insulation Composite System with
rendering for the use as external insulation ob building
walls.
Plastic piping kits for the transport system of hot and
cold water, made of PE-RT Type II.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
Liquid Applied watertight covering kit for wet room
floors and walls.
Liquid applied watertight covering kit for wet room
floors and walls.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Liquid applied roof waterproofing on the basis on
polyurethane polymers.
Torque controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete sizes
M8, M10, M12 and M16.
Fire protective boards.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
Bonded anchor in the size of dia 8 mm to dia 32 mm
for use in concrete.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Liquid Applied roof waterproofing on the basis of
polyurethane.
B + F rail load-bearing elements to use for the storage,
filling and handling of liquid chemicals (substances
hazardous to water).
Prefabricated cold room kits intended to be used to
store agricultural and food products at positive and
negative temperature.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
use in non-cracked concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
use in non-cracked concrete.
DYWIDAG External Strand Post-Tensioning System
for 3 to 37 strands (140 and 150 mm 2 ).
Bonded Injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12
and M16.
Bonded injection type anchor made of galvanized steel
for use in non cracked concrete: sizes M8, M10, M12
and M16.
Internal Partitions Kit for use as non-loadbearing walls.
Non-load-bearing permanent shuttering system based
on hollow blocks of insulating walls above or below
ground and partitions for buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
External thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
Glass fibre Joint tape for gypsum plasterboards.
Glass Fibre joint tape for gypsum plasterboards.
Bonded anchor with anchor rod of sizes M8, M10,
M12, M16, M20 and M24 for use in non-cracked
concrete.
Bonded anchor with anchor rod of sizes M8, M10,
M12, M16, M20 and M24 for use in non-cracked
concrete.
Bonded anchor with anchor rod of sizes M8, to M30 or
rebar dia 8 to dia 23 for use in non-cracked concrete.
BTE Stelcon Rail Load-bearing elements used in
facilities for the storage, filling and handling of liquid
substances (substances hazardous to water).
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
In-situ formed loose fill thermal insulation material
made of cellulose.
In-situ formed loose fill thermal insulation material
made of cellulose.
In-Situ formed loose fill thermal insulation material
made of cellulose.
In-Situ formed loose fill thermal insulation material
made of cellulose.
Non load-bearing permanent shuttering kit based on
elements of EPS.
Joma Angle Brackets type 401M, 401U, 402M and
402U with and without a rib.
Falling Rock protection kit for use in civil engineering
works to stop moving rock blocks with maximum
energy level of 500 kJ.
Falling rock protection kit for use in civil engineering
works to stop moving rock blocks with maximum
energy level of 500 kJ.
B + F Motor Vehicle Load-Bearing Elements to use for
the storage, filling and handling of liquid substances
(substances hazardous to water).
Thermal and/or acoustic insulation mat made of
hemp/fibres.
Post-Installed rebar connection with Fischer injection
mortar FIS EM.
BTE Stelcon Motor Vehicle Load-bearing Elements to
use for the storage, fitting and handling of liquid
substances (substances hazardous to water).
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Log Building Kit.
White acrylic paint without premix glass beads
requiring drop-on materials to be used on trafficked
areas.
Cold plastic without premix glass beads requiring drop-
on materials to be used on trafficked areas.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External thermal Insulation Composite System with
rendering for the use as external thermal insulation of
building walls.
Bonded anchor (injection system) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete.
Spherical bearing with special sliding material.
Systems of mechanically fastened flexible roof
waterproofing membranes.
Fasteners for mechanically fastened flexible roof
waterproofing systems.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
Three-dimensional nailing plate (Purlin tie for timber-
to timber connections).
Three-dimensional nailing plate (concealed beam
hangers).
Joist hanger for structural purposes.
Joist hanger for structural purposes.
Pre-fabricated stair with strings made of flat laminate
and steps made of solid wood for use as an indoor stair
in buildings.
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in non-cracked concrete.
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 doe
use in non-cracked concrete.
Fabricated branches manufactured by heat moulding
(Thermo moulding) from an extruded unplasticized
poly(vinyl chloride) (PVC-U) pipe with and
intermediate layer of PVC-U foam, to be used with
PVC-pipes for non pressure drainage and sewerage in
the ground.
Post installed rebar connections diameter 8 to 32 mm
made with anchorfix2 injection mortar.
Post installed rebar connections diameter 8 to 32 mm
made with MUNGO MIT - SE injection mortar.
External thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
Subframe and fixing kit for fastening stone cladding
elements in ventilated facades.
Subframe and fixing kit for fastening ceramic cladding
elements in ventilated facades.
Subframe and Fixing kit for fastening ceramic cladding
elements in ventilated facades.
Thermal and/or acoustic insulation board made of
polystyrene light weight concrete.
Log Building Kit.
Insulation material made of granulated polystyrene
foam and compound for thermal and/or impact sound
insulation.
Three-dimensional nailing plates for use in roof
systems.
Timber Frame Kits.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite system with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite system with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Thermal and acoustic insulation for building.
External Thermal Insulation composite system with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Torque-controlled expansion anchor made of stainless
steel for use in concrete: sizes M8, M10, M12 and
M16.
Three-dimensional
nailing
plate
(timber-to-
timber/timber to concrete angle bracket).
Three-dimensional nailing plate (Angle bracket for
timber-to-timber or timber to steel or concrete
connections).
Three-dimensional mailing plate (Angle Bracket for
timber-to-timber connections).
External Thermal Insulation Composite System with
rendering on expanded polystyrene (EPS) for the use as
external insulation of building walls.
Torque-controlled expansion anchor for use in non
cracked concrete: sizes dia 12.
Plastics Piping kits for the transport system of hot and
cold water, made of PE-RT Type II.
Liquid-applied roof waterproofings using kits based on
polyurethane.
Bonded anchor with anchor rod made of galvanized
steel or stainless steel of sizes M8, M10, M12, M16,
M20 and M24 for use in non-cracked concrete.
Nailed-in plastic anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and in masonry.
Point supported vertical glazing.
External thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
Kit of waterproofing polymeric membrane and other
components for creating a waterproof system against
action of water on walls and floors of buildings under
indoor and outdoor conditions (EOTA-Product area
code 06.05/21).
Cold plastic without premix glass beads requiring drop-
on materials to be used on trafficked areas.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete.
Bonded anchor in the size of dia 8mm to dia 32 mm for
use in concrete.
External thermal Insulation Composite System with
rendering on polystyrene for use as external insulation
to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on cellular glass for use as external insulation
to the walls of buildings.
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in no-cracked concrete.
Liquid applied covering kits for wet room floors and/or
walls.
Liquid applied watertight covering kit for wet room
floors and walls.
Liquid applied watertight covering kit for wet room
floors and walls.
Torque controlled expansion anchor of sizes M8, M10,
M12 and M16 for use in concrete.
Deformation-controlled expansion anchor of sizes M6,
M8, M10, M12, M16 and M20 for use in non-cracked
concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes 10, 12, 15 and 18 for use in
concrete.
Bonded anchor in the size of M6 to M30 for use in
non-cracked concrete.
Pre-fabricated stair with steps and a load bearing
handrail made of solid wood for use as an indoor stair
in buildings.
Internal Partitions kit for use as non-loadbearing walls.
Three-dimensional nailing plate (joist hanger for wood
to wood connections and wood to concrete or steel
connections).
Three-dimensional Nailing Plates.
Purlin tie for timber to timber connections (timber to
timber purlin tie).
Structural sealant for use in structural sealant glazing
systems.
Post installed rebar connection diameter 8 to 32 mm
made with EASF injection mortar.
Prefabricated stair kits.
Post-tensioning kit for prestressing of structures with
bars.
Nailed-in plastic anchor for fixing of external
insulation composite systems with rendering in
concrete and masonry.
External Thermal Insulation composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Non loadbearing permanent shuttering kits based on
panels made of EPS linked in factory with plastic
spacers.
Liquid Applied roof waterproofing.
Torque controlled expansion anchor of sizes M6, M8,
M10 and M12 for use in non-cracked concrete.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite system with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12
and M16.
Bonded injection type anchor made of galvanized steel
for use in non cracked concrete: sizes M8, M10, M12
and M16.
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12
and M16.
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12
and M16.
Nailed-in plastic anchors for fixing of external thermal
insulation composite systems with rendering in
masonry.
Low bitumen
mass
shingles
with
mineral
reinforcement.
Low bitumen
mass
shingles
with
mineral
reinforcement.
Plastic nailed-in anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Deformation-controlled expansion anchor of sizes M6,
M8, M10 and M12 for multiple use for non-structural
applications in concrete.
Liquid applied roof waterproofing kit on the basis of
reactive polymethylacrylate.
Liquid Applied roof waterproofing on the basis of
polyurethane.
Liquid applied
waterproofing
on
the
basis
of
polyurethane.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
Bonded anchor with anchor rod of sizes M8, M10,
M16, M20 and M24 for use in non-cracked concrete.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Bonded injection type anchor made of steel rod of sizes
M8, M10, M12, M16, M20 and M24 for use in non-
cracked concrete.
Pre-fabricated Stair with steps made of solid wood and
load-bearing bolts for use as an indoor stair in
buildings.
Internal partition kit for use as non-loadbearing walls.
Liquid Applied watertight covering for wet rooms with
wearing surface.
Liquid applied watertight covering for wet rooms with
wearing surface.
Liquid applied watertight covering for wet rooms with
wearing surface.
Liquid Applied watertight covering for wet rooms with
wearing surface.
Liquid Applied watertight covering for wet rooms with
wearing surface.
External Thermal Insulation Composite system with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Systems of mechanically fastened roof waterproofing
membranes.
Systems of mechanically fastened roof waterproofing
membranes.
Three-dimensional nailing plates.
PET based foils with coating in order to enhance
energy economy and heat retention when applied in
insulating glass units.
Timber frame Building Kit.
Variable concealed three part hinges "TECTUS TE 320
3D, TECTUS TE 325 3D and TECTUS TE 630 3D”.
Bonded anchor with anchor rod of sizes M8, M10,
M12, M16, M20 and M24 for use in non-cracked
concrete.
Nailed-in anchors plastic for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Nailed-in and screwed in- anchors plastic for fixing of
external thermal insulation composite systems with
rendering in masonry.
Three-dimensional nailing plate (Angle bracket for
timber-to-timber or timber to concrete connections).
Three-dimensional nailing plate (Hold downs for
timber-to-timber or timber to concrete connections).
Three-dimensional nailing plate (cleats for timber-to-
timber connections).
Three-dimensional nailing plate (Purlin tie for timber-
to-timber connections).
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Prefabricated Building.
Prefabricated Building.
Liquid applied roof waterproofing using kits based on
polyurethane.
Prefabricated Building.
Spherical bearing with special sliding material.
Three-dimensional nailing plate (Joist hanger for wood
to wood connections and wood to concrete or steel
connections).
Pre-fabricated stair steps made of solid wood and steel
for use as an indoor stair in buildings.
Structural Sealant glazing kits.
Timber Frame building kits for dwelling-houses and
similar structures.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded injection type anchor for use in non cracked
concrete: sizes M8, M10, M12 and M16.
In-situ formed loose fill thermal insulation material
made of cellulose.
Q-Web Timber Frame Building Kits.
Torque controlled expansion anchor made of
galvanised steel of size 10 for anchorage in non-
cracked concrete.
Torque controlled expansion anchor made of
galvanised steel of size 10 for anchorage in non-
cracked concrete.
Torque controlled expansion anchor made of
galvanised steel of size 10 for multiple use for non-
structural applications in concrete.
Torque controlled expansion anchor made of
galvanised steel of size 10 for multiple use for non-
structural applications in concrete.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
Liquid Applied roof waterproofing on basis of
polyurethane.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External thermal Insulation composite systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Nailed in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Post-installed rebar connections of the sizes 8 to 32 mm
with BOSSONG BCR V PLUS injection mortar.
Liquid applied watertight covering kit for wet room
floors and walls.
Elastomeric couplings with an eventually stainless steel
shear band used to assembly sewer or drainage pipe.
Insulation material made of granulated polystyrene
foam and compound for thermal and/or impact sound
insulation.
Fire protective Board.
Internal partitions kit for use as non-loadbearing walls.
Prefabricated stair with strings made of flat laminate
and steps made of solid wood for use as an indoor stair
in buildings.
Non load bearing permanent shuttering kits based on
panels made of EPS.
External Thermal Insulation Composite System with
rendering on expanded polystyrene boards for the use
as external insulation to the walls of Buildings.
Bonded anchor (injection system) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar d8 to d32 for use in non-cracked concrete.
Reactive coatings for fire protection of steel elements.
Deformation-controlled expansion anchor made of
galvanized steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Falling rock protection kit for use in civil engineering
works to stop moving rock blocks with maximum
energy level of 1000KJ.
Falling rock protection kit for use in civil engineering
works to stop moving rock blocks with maximum
energy level of 1000KJ.
Alga Cable - T15 Post Tensioning System used for the
prestressing of structures with internal bonded tendons.
Injection system of sizes M8 to M16 for use in non-
cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal
Insulation
Composite
System
(ETICS).
External Thermal Insulation Composite System with
rendering for the use as external insulation of buildings
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Joint Sealing Compound Sikaflex Tank N as a part of
the SIKA-joint sealing system used in facilities for the
storage, handling and filling of substances hazardous to
water.
Annular ringed shank nails.
Joint sealing system used in plants for the containment,
handling and filling of substances hazardous to water.
Fire Protective Slabs.
Three-dimensional Nailing plates.
Three-dimensional Nailing plates.
External Thermal Insulation Composite System with
rendering for the use as external Insulation ob building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Low bitumen
mass
shingles
with
mineral
reinforcement.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Light Composite wood-based beams and columns for
structural use.
External Thermal Insulation Composite System with
rendering for the use as external insulation of buildings.
Type II addition for production of concrete, including
in particular cast-in-situ or prefabricated structural
concrete conforming to European standard EN 206-1.
Post-tensioning kit for internal prestressing of
structures with internal boned and un-bonded strands.
Post-tensioning kit for internal prestressing of
structures with internal bonded and un-bonded strands.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Post installed rebar connections diameter 8 to 32 mm
made with résine MP injection mortar.
Post-installed rebar connections diameter 8 to 32 mm
made with MCS Premium injection mortar.
Post-installed rebar connections with Hilti injection
mortar HIT-RE 500-SD.
Post-installed rebar connection with Powers injection
System AC100-PRO.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete.
Structural sealants for use in structural sealant glazing
systems.
External Thermal Insulation Composite System with
renderings for use as external insulation to the walls of
buildings.
Three-dimensional nailing plates (BB-connector for
wood to wood connections).
External Thermal Insulation Composite System with
rendering for use as external insulation of building
walls.
External thermal Insulation Composite System with
rendering for use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Metal anchor made of galvanised steel of size 6 x 50
and 6 x 70 for multiple use for non-structural
applications in concrete.
Torque-controlled expansion anchor for use in cracked
and uncracked concrete: sizes M10, M12 and M16.
Plastic-nailed in anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
External Thermal Insulation Composite System with
rendering for use as external thermal insulation of
building walls.
Kortmann-BetonFertigteil-System 3, made of concrete,
used in facilities to storage, filling and handling of
liquid chemicals (substances hazardous to water).
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
GH Various Angle brackets.
Penetration Seal.
Penetration Seal.
Kortmann-betonfertigteil-System 2, made of concrete
used in facilities to storage, filling and handling of
liquid chemicals (substances hazardous to water).
Type II addition for production of concrete including in
particular cast-in-situ of prefabricated structural
concrete conforming to European standard EN 206-1.
Bonded anchor with anchor rods of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete.
Bonded anchor (injection system) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete.
Penetration Seals.
Penetration seal.
Insulated Glass Unit with structural sealant punctually
anchored.
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Fasteners for mechanically fastened flexible roof
waterproofing systems.
Cast-in Channel bars.
Cast-in channel bars.
Bonded anchor in the size of dia 8 mm to dia 32 mm
for use in concrete.
External thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls.
Torque controlled expansion anchor made of
galvanized steel of size 14//M10 for use in concrete.
Post-installed rebar connection with Halfen Injection
adhesive HB-VME.
Timber frame building kit.
Prefabricated stair with steps made of solid wood and
load-bearing bolts for use as an indoor stair in
buildings.
Fasteners for flexible roof waterproofing membrane
systems.
Self supporting translucent roof kit.
Special anchor for the rear fixing of facade slabs made
of ceramic plates "Royal Mosa stoneware" according to
EN 14411.
Torque controlled expansion anchor made of stainless
steel of sizes M6, M8, M10, M12, M16 and M20 for
use in non-cracked concrete.
Bonded anchor in the size of 8 mm to 32 mm for use in
concrete.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Thermal insulation material made of loos, free
cellulose fibres.
Three-dimensional nailing plate (Angle Bracket for
timber-to timber or timber to concrete or steel
connections).
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
Torque controlled expansion anchor made of stainless
steel of sizes M6, M8, M10 and M12 for use in non-
cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Bonded Injection type anchor for use in non cracked
concrete: sizes M8, M10, M12 and M16.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Three-dimensional nailing plate (Joist bearings).
Three-dimensional nailing plate (Joist hanger for wood
to wood connections and wood to concrete or steel
connections).
Three-dimensional nailing plate (angle bracket for
wood to wood connections and timber-to-steel
connections).
Three-dimensional nailing plate (angle bracket for
wood to wood connections).
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
B+F sealing system made of trough elements and
sloping areas to use in facilities to storage, filling and
handling of chemical substances (liquids hazardous to
water).
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
Bonded anchor in the size of dia 8 mm to 32 mm for
use in non-cracked concrete.
Thermal and/or acoustic insulation mats and rolls made
of sheep wool.
Fasteners for mechanically fastened flexible roof
waterproofing systems.
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings.
Internal partitions Kit for use as non-loadbearing walls.
Torque controlled expansion anchor made of zinc
coated steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
Torque controlled expansion anchor made of zinc
coated steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12, M16 and M20 for use in
concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12, M16, M20
and M24 for use in concrete.
One component bitumen-polyurethane resin for
flashing application applied directly to bitumen
waterproofing membrane used in the horizontal part of
the roof.
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
Low bitumen
mass
Shingles
with
mineral
reinforcement.
External Thermal insulation Composite Systems with
rendering for the use as external insulation to the walls
of buildings.
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry.
Concrete screw dia 12 made of galvanised steel for use
in concrete.
Liquid applied roof waterproofing on the basis of
polyurethane.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non-cracked concrete: sizes
M8, M10, M12, M16 and M20.
Bonded anchor for use in non cracked concrete: sizes
M8, M10, M12, M16, M20 and M24.
Post installed rebar connections diameter 8 to 32 mm
made with WIT-VE MAX injection mortar.
Non-load-bearing permanent shuttering kit based on
hollow blocks of thermal insulation material.
Torque-controlled expansion anchor, made of
galvanised steel, for use in non-cracked concrete sizes
M8, M10, M12, M16 and M20.
Bonded anchor (Injection System) with anchor rod of
sizes M10, M12 and M16 or use in non-cracked
concrete.
Post-installed rebar connection with
Berner
MULTICOMPOUNDsystem PREMIUM II.
Post-installed rebar connection with G&B Fissaggi
injection System GEBOFIX PRO VE-SF.
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Gabion products made of welded or woven/twisted
mess.
Gabion products made of welded or woven/twisted
mesh.
Gabion products made of welded or woven/twisted
mesh.
VR-4 Metal Anchors for Use in Concrete.
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in concrete.
Cold storage room kits.
Liquid applied roof waterproofing on the basis on
polyurethane polymers.
Liquid Applied Roof waterproofing Kits.
Insulation material made of loose, free cellulose fibres.
Concrete screw size 6 made of stainless steel for
multiple use for non-structural applications.
External bondless post-tensioning system VBT BE 1 to
Purlin Tie for timber-to timber connections (timber-to-
timber purlin tie).
GH Concealed beam hangers type 0-2, I-2, II-2, III-2,
IV-2, 0-4, I-4, II-4, III-4 and IV-4.
Angle brackets and hold-downs for timber-to-timber or
timber-to-concrete or steel connections.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Bonded anchor in the size of dia 8 mm to dia 40 mm
for use in concrete.
Bonded capsule anchor for use in non cracked
concrete: sizes M8, M10, M12, M14, M16, M20, M22,
M24 and M30.
3M Fire Barrier Pillow and self Locking Fire Barrier
Pillow.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Corrugated bitumen tiles.
Prefabricated wood-based load bearing stressed skin
panels.
Fastening screws for metal members and sheeting.
Veture kit - Prefabricated units for external wall
insulation.
Prefabricated metal building unit for multi storey
buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Internal Partition Kits for use as non-loadbearing walls.
External thermal insulation Composite system with
renderings for the use as external insulation to the walls
of buildings.
Screwed-in plastic anchors for fixing of external
thermal insulation composite systems with rendering in
concrete and masonry.
Joint sealing system used in plants for the containment,
handling and filling of substances hazardous to water.
Thermal and/or acoustic insulation material made of
straw.
Three-Dimensional Nailing plate (joist hanger for
wood to wood connections and wood to concrete or
steel connections).
Three-dimensional nailing plate (Purlin tie for timber-
to-timber connections).
Three-dimensional mailing plate (concealed beam
hangers).
Three-dimensional
nailing
plate
(timber-to-
timber/timber-to-concrete angle bracket).
HVV Angle brackets type 4 70/90/105 with and
without rib.
Three-dimensional nailing plate (Joist hanger for wood
to wood connections).
Three-dimensional nailing plate (timber to timber
cantilever bracket).
Three-dimensional nailing plate (connectors for wood
to wood connections).
Three-dimensional nailing plate (timber-to -timber
angle bracket).
Three-dimensions nailing plate (timber-to-timber angle
bracket).
Self drilling fastening screw for metal members and
sheeting.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Thermoplastic with premix glass beads requiring drop-
on materials to be used on trafficked areas.
Product with radiant heat reflective component for use
in thermal insulation systems of building envelopes.
Light composite wood-based beam.
Systems of mechanical
fastened
flexible
roof
waterproofing membranes.
Rubber fibre mat for impact sound insulation under
floating screed.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering for the use as external insulation to the walls
of buildings.
Tecfi High Performance anchor HVE Rock.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Glazing Guardrail kit.
Glazing Guardrail kit.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Post-tensioning kit for prestressing of structures with
unbonded strands.
Light Composite wood-based beams for load-bearing
constructions.
Microprismatic Retro-reflective Sheeting.
Microprismatic Retro-reflective Sheeting.
Microprismatic Retro-reflective Sheeting.
Microprismatic Retro-reflective Sheeting.
Nikkalite Crystal Grade (CRG) 9200 series with
transparent overlay film Acryl-Cal 100 series.
Thermal Insulation board made of Calcium silicate.
Metal anchor made of galvanised steel of sizes M6,
M8, M10 and M12 for multiple use in non-structural
application in concrete.
Thermal and acoustic insulation for building.
Torque controlled expansion anchors of sizes M8,
M10, M12 and M16 for use in concrete.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External thermal Insulation Composites Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal insulation Composite System with
renderings for the use as external insulation to the walls
of buildings.
Bonded anchors in size of dia 8 mm to dia 32 mm for
use in concrete.
Fasteners for flexible roof waterproofing systems.
Post installed rebar connections diameter 8 to 32 mm
made with ANKROCHIM SF 800 injection mortar.
Bonded anchor for use in non cracked concrete: sizes
M8, M10, M12, M16, M20 and M24.
Metal anchor of stainless steel of sizes M6, M8, M10
and M12 for multiple use for non-structural application
in concrete.
Liquid Applied Roof waterproofing kit, based on
polyurethane.
Liquid Applied Roof waterproofing Kits, based on
Water dispersible polymers.
Metallic brackets for connection of solid wood or wood
based elements to solid wood or wood based concrete
or steel support.
Beam Hangers for connection of solid wood or wood
base elements to solid wood or wood based, or concrete
support.
Bonded injection anchor made of galvanized or
stainless steel for non cracked concrete: sizes M8,
M10, M12, M16, M20, M24 and M30.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
Bonded anchor (Injection system) with anchor rod of
sizes M10, M12 and M16 for use in non cracked
concrete.
Post installed rebar connections diameter 8 to 32 mm
made with R-KEA+ injection mortar.
Fire Stopping and sealing Product. Penetration Seals.
Concrete screw size 6 for multiple use for non-
structural applications in concrete.
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering intended for use as external insulation to the
walls of buildings.
Liquid applied watertight covering kit for wet room
floors and walls.
Liquid applied watertight covering kit for wet room
floors and walls.
Self-supporting composite lightweight panels for use in
roofs.
Zinc-plated steel deformation-controlled expansion
anchor in sizes of M8, M10 and M12 for use in non-
cracked concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar die 8 to dia 32 for use in non-cracked concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete.
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete.
Plastic piping kits for heating systems, made of PE-RT
Type I with an oxygen barrier layer.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Torque controlled expansion anchor of sizes M6, M8,
M10 and M12 for use in non-cracked concrete.
Deformation controlled expansion anchor made of
galvanised or stainless steel of sizes M8, M10, M12
and M16 for multiple use for non structural application
in concrete.
Deformation controlled expansion anchor made of
galvanized or stainless steel of sizes M8, M10, M12
and M16 for use in non-cracked concrete.
Deformation-controlled expansion anchor, made of
galvanised steel for use in non cracked concrete: sizes
M6, M8, M10, M12 and M16.
Liquid applied roof waterproofing on the basis of
polyurethane.
Liquid Applied Roof Waterproofing Kit, based on
polyurethane.
SIKA Sealing band system Sika Tank FB-25 used in
facilities for the storage, handling and filling of liquid
chemicals (substances hazardous to water).
Deformation-controlled expansion anchor made of
galvanised steel for multiple use for non-structural
applications in concrete.
Bonded anchor with Anchor rod of sizes M8 to M30 or
rebar die 8 to dia 30 for use in non cracked concrete.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
Light composite wood-based beam for structural
purposes.
External thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
External Thermal insulation Composite system with
rendering on mineral wool for the use as external
insulation to the walls of buildings.
Three-dimensional nailing plate (concealed beam
hangers).
Nailed -in plastic anchor for the fixing of external
thermal insulation composite systems with rendering in
concrete.
External Thermal Insulation Composite System with
rendering on expanded polystyrene boards for the use
as external insulation to the walls of buildings.
Thermal and/or acoustic insulation board made of
polystyrene light weight concrete.
External Thermal Insulation System with rendering for
the use as external insulation of building walls.
Blend of oil, wax and specific additives for protection
of prestressing tendons.
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool or the use as
external insulation to the walls of buildings.
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Torque controlled expansion anchor made of stainless
steel for use in cracked and uncracked concrete: sizes
M8, M10, M12 and M16
External Thermal Insulation Composite System with
rendering for use as external insulation of building
walls
External Thermal Insulation Composite Systems with
rendering for the use as external insulations for
building walls
Log building kit
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite Systems with
rendering for the use as external insulation for building
walls
Post-installed rebar connections of the sizes 8 to 32 mm
with SOCOM ECOPOXY ECO 4800 injection mortar
Solid wood slab elements to be used as structural
elements in buildings
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Thermal insulation boards of polystyrene cement is
used for the thermal insulation of buildings
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Low bitumen mass shingles with mineral reinforcement
Liquid applied roof waterproofing kits, based on
polyurethane
Liquid applied roof waterproofing kit on the basis of
polyurethane-two-component- with polyester fleece for
reinforcement
Torque-controlled expansion anchor of sizes M6, M8,
M10 and M12 for use in non-cracked concrete
Post-Installed rebar connection with SCELLL-IT
injection System X-PRO
Deformation controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use on non-structural applications in concrete
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12, M16, M20
and M24 for use in concrete
Torque controlled bonded anchor with anchor rod of
sizes M8, M10, M12, M16, M20 and M24 for use in
concrete
Bonded anchor with anchor rod of sizes M8, M10,
M12, M16, M20, M24 and M30 for use in non-cracked
concrete
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 30 for use in non-cracked concrete
Liquid applied watertight covering for wet floors with
wearing surface
Bonded anchor with anchor rod made of galvanised
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in non cracked concrete
Bonded anchor in the size of dia 8mm to dia 32 mm for
the use in concrete
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
Torque controlled expansion anchor for use in cracked
and uncracked concrete: sizes M8, M10, M12 and M16
Torque controlled expansion anchor made of stainless
steel for use in cracked and uncracked concrete: sizes
M8, M10, M12 and M16
Deformation controlled expansion anchor made of
galvanized or stainless steel of sizes M8, M10, M12
and M16 for use for non cracked in concrete
Deformation controlled expansion anchor made of
galvanized or stainless steel of sizes M6, M8,M10 and
M12 for multiple use for non structural application in
concrete
Torque-controlled expansion anchor, made of
galvanised steel for use in cracked and non cracked
concrete: sizes M6, M8, M10, M12, M16 and M20
RAFIX EDB,EDL and EDB A4
Deformation controlled expansion anchor made of
galvanized or stainless steel of sizes M8, M10, M12
and M16 for use for non-cracked in concrete
Thermal insulation board made of calcium silicate
Torque controlled expansion anchors of sizes M8,
M10, M12 and M16 for use in concrete
Three-dimensional nailing plate (connectors for wood
to wood connections)
Three-dimensional nailing plate (timber to timber
cantilever bracket)
Three-dimensional
nailing
plate
(timber-to-timber
angle bracket)
Three-dimensional nailing plate (Joist hanger for wood
to wood connections)
Plastic Piping Kits for the transport system of hot and
cold water, made of PE-RT Type II
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete
Deformation - controlled expansion anchor made of
galvanized steel of sizes M6, M8, M10, M12, M16 and
M20 for use in noon-cracked concrete
Plastic sheets ´Wolfin IB´ for the lining of collecting
basins and rooms for the storage of liquids hazardous to
water
Liquid Applied Roof Waterproofing Kit, based on
Polyurethane
Cellular glass loose fill for the use as thermal and frost
insulating layer, water capillary barrier and drainage
and light fill in building and road construction
applications
Liquid Applied Roof waterproofing Kit, based on water
dispersible polymers
Three-dimensional nailing plates (Angle Brackets for
timber to timber connections)
Internal partition kits for use as non-load bearing walls
Liquid applied watertight covering kit for wet room
floors and walls
Plastic anchor for multiple use in concrete and masonry
for non-structural applications
Early Suppression, Fast response (ESFR), K202,
Upright and pendant Automatic Fire Sprinkler for use
in automatic sprinkler systems
Post-tensioning kit for prestressing of structures with
unbonded strands
Bonded injection type anchor for use in cracked and
non cracked concrete: Threaded rods M8 to M30 and
rebars dia 8 to dia 32
In-Situ formed loose fill thermal insulation material
made of cotton fibres
Internal partition kit for use as non-loadbearing walls
Eurotek Joint Sealing Band as a part of the joint sealing
system of the Euroteam Bauchemie GmbH used in
facilities for the storage , handling and filling of liquid
chemicals (substances hazardous to water)
Pre-fabricated stairs with strings made of flat laminate
and steps made of solid wood for use as an indoor stair
in buildings
Nailed-in anchor for fixing of external insulation
composite systems with rendering in concrete and
masonry
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings
External Thermal Insulation Composite Systems with
Rendering on polystyrene for use as external insulation
to the walls of buildings
Internal Partition kits for use as non-loadbearings walls
Self Supporting composite lightweight panels for use in
roofs and external walls
Sedimentation reducing concrete admixture
Post-tensioning kit for prestressing of structures
External thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings
In-situ formed loos fill thermal insulation material
made of sheep wool
Post-installed rebar connection with Powers injection
System V12
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete
External Thermal Insulation Composite Systems with
rendering for the use as external insulation to the walls
of buildings
Light Composite wood based beams for structural
purposes
External Thermal insulation Composite System with
rendering on phenolic foam for the use as external
insulation to the walls of buildings
Liquid Applied Roof Waterproofing Kit, based on
Polyurethane
Cross Laminated timber (CLT) - Solid wood slab
elements to be used as structural elements in buildings
Liquid applied Roof waterproofing Kit, base on
polyurethane
Liquid Applied Roof Waterproofing kit, based on
polyurethane
Torque-controlled expansion anchor, made of
galvanised steel for use in non-cracked concrete: sizes
M6, M8, M10, M12, M14 and M16
Torque-controlled expansion anchor, made of stainless
steel for use in non-cracked concrete: size M8, M10,
M12 and M16
Torque-controlled expansion anchor, made of
galvanised steel, for use in concrete: sizes M8, M10,
M12 and M16
Plastic anchor for multiple use in concrete and masonry
for non-structural applications
Liquid Applied roof Waterproofing on the basis of
polyurethane
Bonded anchor in the size of M8 to M30 for use in
non-cracked concrete
External thermal insulation composite system with
rendering for the use as external insulation of building
walls
Bonded anchor with Anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete
Post-installed rebar connection with Team pro injection
System TP VSF
Bonded anchor (Injection System) with anchor rod of
sizes M10, M12 and M16 for use in non-cracked
concrete
Prefabricated stainless steel wire ropes with end
connectors
Balcony glazing system
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
Timber units for walls, roofs and floors
Internal Partitions kits for use as non-loadbearing walls
Internal partitions kit for use as non-loadbearing walls
Cold storage room kits
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings
Sealant used in structural sealant glazing systems to
bond glass onto metal
Internal partition kits for use as non-load bearing walls
Internal Partition Kits for use as non-loadbearing walls
Prefabricated metal building unit for multi storey
buildings
Cold storage room kit, for the execution of interior cold
storage rooms with service temperatures between -15 to
40°C aimed to store food and non-food products
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings
External Thermal Insulation Composite Systems
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls
Liquid Applied Roof Waterproofing Kit, based on
Polyurethane
Liquid Applied Roof Waterproofing Kit, based on
Polyurethane
Three-dimensional nailing plate (timber-to-timber or
timber-to-concrete angle bracket)
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete
Torque Controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
use in non-cracked concrete
Metal Anchor made of galvanised steel of sizes M6,
M8, M10 and M12 for multiple use for non-structural
application in concrete
External Thermal Insulation Composite Systems with
rendering on polystyrene for as external insulation to
the walls of buildings
Thermal Insulation Board made of calcium silicate
Timber Frame Building Kit
Liquid Applied Roof waterproofing kit, based on
Polyurethane
Lumon 5 balcony and terrace glazing system
Three-dimensional nailing plate (roof brackets in the
fixing of photovoltaic systems on wooden roof
constructions)
Prefabricated Metal Building for multi storey Buildings
In-situ formed loose fill thermal insulation material
made of cellulose fibres
Liquid applied waterproofing for accessible areas on
the basis of polyurethane
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M16 and M20 for use in
concrete
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12, M16, M20
and M24 for use in concrete
Torque controlled bonded anchor with anchor rod of
sizes M8, M10, M12, M16, M20 and M24 for use in
concrete
Bonded anchor with anchor rod of sizes M8 to M30 or
rebar dia 8 to dia 32 for use in non-cracked concrete
Three-dimensional nailing plate (Post bases for the
support of timber columns and posts as load-bearing
elements)
Timber frame building kit for construction of detached
single-family two storey houses maximum ground +
top floor
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16
for use in cracked and non-cracked concrete
Plastic Anchor for multiple use in concrete and
masonry for non-structural applications
Plastic Anchor for multiple use in concrete and
masonry for non-structural applications
Torque-controlled expansion anchor for use in non-
cracked concrete
Bardoline Classic Rectangular, Bardoline Classic
Beaver, Bardoline Classic Triangular
Low bitumen mass shingles with mineral reinforcement
Plastic piping kits for heating systems made of PE-RT
type I or PE-RT type II with an oxygen barrier layer
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings
Low bitumen mass shingles with mineral reinforcement
ETAs without European Technical Approval Guidelines as per Article 11 of the
In product areas where no ETAG exists, ETAs can be awarded, subject to the
agreement of all EOTA bodies and the European Commission, through what is known
B
as the Common Understanding of Assessment Procedure (CUAP), in which the
assessment criteria for the product and its intended use are set out.
Full details of this arrangement are given in EOTA’s Common Procedural Rules for
Requesting, Preparing and the Granting of European Technical Approvals, in
particular in sub-sections 3.2.3 and 3.2.4. The procedure is also called up in the CPD
(Article 9.2)
For the time being the EC has authorised EOTA to issue ETAs according to this
procedure of Article 9.2 for the following product area(s)
Subjects
1. Permanent insulating shuttering system
2. Internal insulating floor finishing system
3. Construction products made of animal fibres for acoustic and thermal
insulation
4. Construction products made of vegetable fibres for acoustic and thermal
insulation
Amendment (version bis)
•
Amendment regrouping previous versions (version tris)
•
cluster 1 Factory-made thermal insulation material and/or acoustic
•
insulation material made of vegetable or animal fibres
cluster 1 Rev1 Factory-made thermal insulation material and/or
•
acoustic insulation material made of vegetable or animal fibres
cluster 2 In-situ formed loose fill thermal insulation material and/or
•
acoustic insulation material made of vegetable or animal fibres
Thermal insulation material and/or acoustic insulation material made
•
of hemp fibres to be used under floating floors
5. Kit for traffic noise reducing devices (using hollow blocks of cement
bonded wood chips as permanent shuttering system)
6. Prefabricated compressed mineral wool boards with two layers of acrylic
paints (on the external side of the product)
7. Lightweight sound absorbent baffle made of wood fibres (laminated particle
board, for interior walls)
8. Sound absorbing elements for internal use, made of melamine resin foam
with variable surface structure, used with or without coating
9. Vibration and impact noise isolation with floating floor systems. Surface
mats and discrete (pads) resilient isolators as element of floating floor systems
B
10. Bitumen on coated polystyrene granules as a dry mix for impact sound
insulation
11. Large-sized fibre gypsum panels used for walls of prefabricated houses
12. Channel bars (cast-in steel channel bars)
13. Vibration and noise isolation with elastically fixed wall panels
(elastomeric or composite-elastomeric materials placed between supported
wall element and the structural element of the building)
14. Chemical anchoring kit, consisting of a polymer resin and an activator
contained separately within a single cartridge. Complete mixing when
extruded
15. Special anchors (bolt and eccentric sleeve of stainless steel)
16. Wall plates made of stainless steel
Kit consisting of a trap with partially mechanical closure, mounted in a
non-trapped gully
17.1. Kit consisting of a trap with partially mechanical closure, mounted in a
non-trapped gully – Rev 1
Rice husks in bulk
Rubber-based expansion anchor
19.1. Rubber-based expansion anchor – Rev 1
Cast-in anchor bolt
Steel plate with cast-in anchor(s)
Kit of epoxy concrete / glassfibre-reinforced polyester anchors / epoxy
mortar
Powder actuated fastener for the fixing of insulation material
Connection and protection devices for load-bearing pre-cast concrete piles
(two products: pile joint and rock shoe)
Solid wood slab element (bridges)
Punching preventer for concrete slabs
Solid wood slab element (buildings)
Roof insulation supporting waterproofing systems
B
Cellulose-reinforced bitumen shingles
Stud rails and double head studs for increasing the punching capacity of
flat slabs on columns
Homogenous building board for external cladding
Composite structural floor system
Internal covering system of gypsum fibre boards
Homogenous building board for internal lining
Gypsum bonded particleboard
Cavity trays
Couplings for standardised reinforcing bars
Pressboard façade claddings
Modular building panels
Fastener of external wall claddings
Microprismatic retro-reflective sheetings
Building kit made of special components of wood-based materials
Column shoes
Connector for Sandwich elements of concrete
Kit for manhole top consisting of Cover and additional rings made of
plastic for different purposes
Balcony glazing system without vertical frames
Composite roof waterproofing kit
Mechanical fastening system for fixation of thermal insulation in flat or
pitched roofs made of steel
Gas and watertight seals for pipes in the area of wall and floor penetrations
Ceiling/flooring elements made of wooden boards or laths, glued on the
flat side.
B
Sealing kits, profiles and strips usually made of foamed polyurethane,
plastic impregnated bitumen or butly
Joints sealing compounds and profiles
Roof systems: large metal shells with or without thermal insulation
Chemical waste drainage system
3D Construction Kit
Steel truss for roofs
Prefabricated roller shutter box
Vibration and noise isolation with elastically suspended ceilings
Anchor for External Thermal Insulation Composite Systems (ETICS)
Tension Rod System
Ventilation opening device with acoustic damping
Wood shavings in bulk to be used for thermal insulation
Kit for injection piles (composite steel/concrete piles) with a structural
member of defined steel, dia 63.5 mm
Elastomeric bearings for the building sector of type “b”: Profiled
elastomeric bearing
Sliding bearing
Admixture for concrete recycling “Delvo Stop 10G”
Admixture “Delvo stop 10 G” for washing water
Rapid setting cement A, B and C
Rapid setting cement
Timber units for walls and roofs
Single point supported vertical glazing
Point fastener
B
Surface water repellent product, hydrofobic agents based on organo-
metallic substances
Coating system eliminating electrostatic charges for facilities used for
storage, filling and handling of water endangering liquids
Coating system to be used for facilities used for storage, filling and
handling of water endangering liquids
Fire resistant glazed kits
Wood fibre insulation as boards sprayed in situ
Thermal insulating board made of mineral material
Kit for pipe system consisting of outer pipe made of concrete, unreinforced
or reinforced and inliner made of unplasticized polyvinylchloride (PVC – U)
which are fixed together and fittings of the same materials
Light composite wood based beam
Lightweight framing elements for non-ventilated sheet metal façades
External thermal insulation system based on cement-free adhesive mortar
and base coat
Fire screen (A barrier to prevent the spread of fire, smoke and sparks in
ventilation ducts)
Fabric connecting joints
Level-crossing systems (types A1, A2 and B)
Plastic piping kits for the transport system of cold and hot water intended
for human consumption, made of PE-RT with or without barrier layer
Double-wall cylindrical flat-bottom tank made of GRP
Spherical, double-walled tank of polymer concrete faced with GRP
Single-wall cylindrical flat-bottom tank of GRP
Concrete screw for anchorage in normal-weight concrete
Cartridge fired pin for connections for thin gauge steel members and
sheeting
Steelwork connector
B
Buried glass reinforced filament wound (GRE) piping systems for the
transport under pressure of water intended for human consumption
Buried glass reinforced filament wound (GRE) piping systems for the
transport under pressure of water intended for human consumption in polluted
soils
Buried glass reinforced filament wound (GRE) piping systems for the
transport under pressure of water not intended for human consumption
Buried glass reinforced filament wound (GRE) piping systems for drainage
and sewerage with or without pressure
Plastic piping kits for heating systems, made of PE-RT with an oxygen
barrier layer
Piping made from thermoplastic materials, for the transport of chilled
water
Factory cellulose glass loose fill
Piles made of ductile iron
Thermal insulation kit for roofs intended to be assembled in situ
Vibration isolation of buildings with elastomeric bearing
Roofing underlay
Binder in concrete and mortar
Door threshold with build-in draining system for draining off of water
Hydraulic binder (slag and additives)
Specialised glued laminated wood beam
Annular ringed shank nails and connector screws
Fly ash for concrete
109.1. Fly ash for concrete
Panels for acoustic and thermal insulation
Pipe penetration seal using an intumescent mat
Damper for damping vibrations, mainly in buildings
B
Glass concrete composite system (gccs)
Structural Sealant Glazing System
Invisible Concealed Hinges
Emergency Escape Bolt operated by a pull handle & frangible component
Polyurethane-bound mats made of mineral material to be used for impact
sound insulation
Cement-bonded board
Metal Anchor for use in autoclaved aerated concrete
Levelling fastener system for roofs, walls and interior applications with
sub- constructions made out of concrete
Levelling fastener system for roofs, walls and interior applications with
wooden sub- constructions
Vehicle and rail load-bearing bodies made of reinforced concrete to seal
areas, suitable as installation for discharging water-contaminating liquids over
sloping to use in construction works to deal with water-contaminating
substances.
Sealing system made of asphalt to seal areas, suitable as installation for
discharging water-contaminating liquids over sloping to use in construction
works to deal with water-contaminating substances.
Restoration system for sett paving areas
Joint sealing system glued on concrete
Surfacing material for a layer impervious to water contaminating
substances
Kit of waterproofing polymeric membrane and other components for
creating a waterproofing system against action of water on walls and floors of
buildings under indoor and outdoor conditions
Kit of a Elastomer/Bitumen composite sheet and other components for
creating a roof and construction waterproofing system
Kit of liquid applied polymer modified mineral sealing mass and other
components in contact with tile coverings for creating a waterproofing system
against action of water on different parts of constructions under indoor and
outdoor conditions
B
Polypropylene foam insulating boards
Intumescent, flexible fire stopping fire sealing product based on graphite
(reactive material)
Adhesive tape for structural glazing application
Natural calcined pozzolana as type II addition
Kit for pre-insulated aluminium ducts
Ceramic coating for thermal insulation
Translucent external wall insulation made of prefabricated façade panels
Kit for soil nails
Kit for rock and soil anchors
Spherical bearing with special sliding material
Floor covering on the basis of polyurethane
Thin reflective insulation product intended to be used as thermal
insulation complement in the construction envelope
Spray-applied mineral wool
143. Dry Plate
Pipe liner for renovation of underground non-pressure sewerage networks
with nominal pipe diameters from 100 mm to 1200 mm to be incorporated
with a special procedure
Steel beams with special joining technology
Elastomeric bearings for the building sector. Specific title of the products
applied for
Type “a”: Elastomeric bearing of higher hardness
Road Marking products
A kit consisting of a thermal insulation board, fabricated from expanded
polystyrene (EPS) and a defined facing to be used for accessible flat roofs for
pedestrian traffic applied in a roofing system
Finishing board, kit with patented click mechanism
B
Plastic sheets for sealing of collecting basins and collecting rooms for the
storage of water-contaminating liquids (liquids hazardous to water)
Fire seals, smoke seals and combined fire and smoke seals for fire
resisting and/or smoke control door assemblies
Unplasticized poly (vinyl chloride) (PVC-U) piping system for domestic
waste water discharge inside the building to a maximum discharge
temperature of 75°C
Sheets of factory-made machine-welded fabric for cracking control in
concrete elements
Soft foam insulation
Flexible coupling for gravity and pressure (below 1.5 bars) sewerage and
drainage pipe
Quenched and tempered wire for prestressing, ribbed and plane
Plastic steps for underground man entry chambers
Double wall static tanks made from rotating moulded polyethylene for
above ground storage of domestic heating oils and diesel fuels
Precast concrete products – Beams made of prestressed steel fibre
concrete
HRC T-headed reinforcement steel bar
Special cement CEM III/A with high sulphate resistance
Glass-crystallic Cladding plates
Self-Adhesive Glass mesh Tape
Highly densified EPS as a load bearing and thermal insulating element
Insulation product made of expanded perlite (EPB)
Composite cement (clinker, blast furnace slag, natural puzzolana) class
32,5 N-LH with high sulphate resistance
Wood & Metal composite lighting columns
Sauna Stove fired by wood
Polyester fibre thermal & Acoustic insulation
B
Timber Frame Kit
Kit composed by sub frame and fixings for fastening cladding elements
and also external wall elements, made of stone and ceramics
A packaged small domestic waste water treatment plant for up to 50 PT,
made of rotationally moulded PE for use underground and subjected to traffic
loads
Composition toilet
With bricks coated external insulation system
Boards made of natural agglomerated cork for thermal and acoustic
insulation
Bitumen shingles with mineral or synthetic reinforcement
Laminated bitumen shingles with mineral or synthetic reinforcement
Fibreboard for wall and roof constructions, vapour open
Floor panel with a polyurethane surface
Profiled steel sheeting for floor systems in combination with a ribbed
reinforced concrete slab
Punched metal plate fasteners
Welded gabion products
Pool Safety Cover
Prefabricated cable pits in reinforce concrete
Prefabricated cable pits made of polystyrene (ps) recycled
Calcium carbonate fines as additions for concrete with binding properties
similar to additions type II
Masonry Spacer Mat
Roof insulation supporting roofing tiles
One component bitumen-polyurethane resin for flashing application
applied directly to bitumen waterproofing membrane used in the horizontal
part of the roof
Remedial damp-proof course
B
Powered pedestrian door drives and systems
Sandwich boards composed by three layers, respectively of agglomerated
cork, coconut fibres and fibreboard MDF
Agglomerated cork and grain recycled rubber with polyurethane binder
Agglomerated cork with polyurethane binder
Mortar with insulating components for floor decks
Cast-in anchor with internal threaded socket
Fastening screw for metal sheet roof covering
Fabricated fittings manufactured by heat moulding (thermo moulding)
from an extruded unplasticized poly(vinyl chloride) (PVC-U) pipe with an
intermediate layer of PVC-U foam, to be used with PVC-U pipes for non-
pressure drainage or sewerage buried in the ground
Swivel joints manufactured by heat moulding (thermo moulding) from an
extruded unplasticized poly(vinyl chloride) (PVC-U) pipe, with a free angle of
deflection to a maximum of 30° to increase the flexibility of fittings, such as
brands, couplers and saddles, in buried non-pressure and sewage applications
Copper plumbing tube with polyethylene covering for sanitary and
heating applications
Kit for closure system for conveyors systems
Insulation material made of granulated polystyrene and compound
202.1 (Rev1) Insulation material made of granulated polystyrene and
compound
Glazing guardrail kit
PVC sheet for leak protecting linings
Thermo-mechanically rolled long steel products made of weldable fine
grain structural steel of special steel grades
Structural sealant glazing on wood frame
External Thermal Insulation Composite System faced with clinker brick
Semi-flexible pavement/floor topping
Ventilated façade system with self-supporting composite panels.
B
Mechanical Anchorages for Reinforcing Bars
Reinforcing Bars with Threaded Ribs
Hot rolled products of structural steels
Plastics piping kits for the transport system of hot and cold water,
intended for human consumption, made of glass reinforced polypropylene
Plastics piping kits for heating systems, made of glass-reinforced
polypropylene
Plastics piping kits to be used in fixed fire fighting systems, made of
glass-reinforced polypropylene
Light weight cementitious screed
Modular tiles of natural stone including snap-on connection and
polyurethane layer
Factory-made boards and products formed by moulding of a silicate
polystyrene composite for the thermal and/or acoustical insulation
An anchor device designed to be fully bonded to a multi layered modified
bitumen roof waterproofing system provided with a polyester reinforcement ,
to form a structural anchor without perforating the roof waterproofing system,
intended to connect a personal fall protection system
Bolted glazing kit
Wood-concrete composite slab
Light weight floor system
Integrated facade kits with active and/or passive solar elements (IFK-
SRE)
Concrete Protection Linings of Collecting Basins/Rooms for Liquids
Hazardous to Water
Sealing Kit for Filling Areas of Petrol Stations
Reinforcing Kit with Carbon Fibre Laminates for the Strengthening of
Beams and Plates of reinforced and Prestressed Concrete
Light composite wood-based beam
Liquid applied roof waterproofing kits based on block co-polymer
elastomeric, 100% synthetic rubber
Kit for reinforced concrete members subject to compressive loading
Sand Bentonite Polymer Gel(SBPG) for application as a sealing barrier or
as a component of a sealing barrier system
Sump pallets made of steel
Connections for precast concrete columns and beams
B
Connection Units for Concrete staircases and slabs
Type I addition for concrete
Type II addition for concrete
Chimney kit with clay flue liner
Prefabricated wall elements of bonded clay masonry unit
Kit for bonding of clay masonry units on site
Permanent shuttering for floors
Floor insulation based on polystyrene light weight concrete
Precast concrete products-Wall elements of steel fibre concrete
Structural composite lumber products: Laminated Strand Lumber (LSL)
and Parallel Strand Lumber (PSL)
Road marking materials – retroreflective elements with refractive index
1.9
Road marking materials – retroreflective elements with refractive index 2.4
Structural Sealant Glazing Kit as infill element for façade constructions
Suppression mode early suppression, fast response automatic sprinkler
Insulated glass unit punctually anchored
Glued laminated timber beam with 2 or more waney lamellas
Modified Fly Ash for concrete
Special drawn sheet glass
Kit for non-loadbearing internal and external walls made of glass blocks
Wooden shingles
Parapet made of glass with failure protection
In situ sprayed polyurethane foam for sealing joints, filling cavities and
for fixing construction elements
Mortars based on sulphur
Sulphur concrete elements
B
Fibres for concrete : metallic amorphous fibres
Factory made masonry units of cement bonded wood chips
Prefabricated timber framed load-bearing wall elements
Box Beam with perforated, inclined webs
Expanding structural bolting assemblies for blind fastening of steel
components
Steel mesh for retaining of unstable slopes by controlling and preventing
rockfalls and loose debris flow along highways roads, and railways
Cable Net Systems
Wire Rope Loop System to Connect Precast Concrete Components
Plastic Anchor for Use in Concrete
Powder Actuated Fastener for Multiple Use in Concrete for Non-
structural Applications
Coating System for Inside Use of Tanks Made of Steel for the Storage of
Liquids Hazardous to Water
Light Weight Roof System
EPI adhesives
Calcined layer silicate based type II addition
Sedimentation reducing concrete admixture
Roof and wall systems with hidden fastenings
Flat aluminium products made of aluminium alloy EN-AW-5059
Corrugated bitumen tiles
Large span load-bearing sandwich panels for roofing
Reinforced tape for assembled gypsum plasterboards
Prefabricated Small Wastewater Treatment Plants
Insulation Product made of Wood Shavings, Inorganic Cementing Agent
and water
Thermal insulation board made of expanded polystyrene (EPS) and
cement
Expanded polystyrene (EPS) insulating blocks
B
Polymeric concrete addition
Load bearing thermal insulation elements which form a thermal break
between balconies and internal floors
Powder-coating system for structural steel components without
previously galvanizing
Solid wood slab element – element of dowel jointed timber boards to be
used as a structural element in buildings
Prefabricated wood slab element made of mechanically jointed square-
sawn timber members to be used as a structural element in buildings
Rubber fibre mat to be used for impact sound insulation
Prefabricated steel and stainless steel wire ropes with end connector
Self-tapping screws for use in timber construction
Extended Coverage Control Mode Automatic Sprinkler
Suspended ceiling kits for use in exterior applications
Terrace decking kit
Processed blend of main constituents according to EN 197-1, without
clinker, as a type II addition for concrete
Corrugated plastic ducts
Welded gabion products
Spacer system for site assembled double skin metal roof and wall
cladding.
Fastening Screws for Sandwich Panels
Thermal insulation roof kit for metal or flexible roof coverings
Roof slates
Kit for prestressed flat slabs with steel fibre reinforced concrete
Low shrinkage calcium sulphoaluminate cement
Insulating Glass Units Production with Heat Mirror Film
Mineral pre-coated ceiling panels
Self-adhesive Anti-slip Covering for Floorings
Liquid Applied Water Vapour Control Layers
B
Factory made vacuum insulation panel (VIP)
Granulated polystyrene for core thermal insulation of cavity walls (two-
leaf masonry walls)
Cement – bonded insulating board made of wood chips
Heat Mirror
Kits for green roofs
Thin walled steel flat products predominantly for roofing and cladding
with organic coil-coating system
Steel corrugated culverts
A Rubber/Bitumen Liquid Applied® Bridge Deck System
Floor void former
Surface maintenance treatment for highways
Surface repair treatment for highways
Rapid Hardening Calcium Sulphoaluminate based Cement
Kit for prestressed flat slabs with steel fibre reinforced concrete
Kit of concrete columns and prefabricated bracing light-weight concrete
infill
Plantable coverings made of welded steel grids for slope stabilisation
systems
Welded soil boxes
Cast or spray applied hemp/lime kit for internal and external wall
construction
Kit consisting of chimney flue liner and ancillaries
Composite boards made of agglomerated cork and grain recycled rubber
for acoustic and thermal insulation
Hydraulic filling material for large underground volumes
Radon detector device
Finger Jointed green wood for structural application
Load Bearing timber framed wall panels
Steel framed membrane building kit
B
Reaction resin mortar for joints between concrete elements
Roof covering kit using in-situ sprayed polyurethane foam
Glued laminated timber with high-strength lamellas and special
longitudinal joints
Granulated polystyrene foam with binding agent as non-load bearing
thermal insulation
Plastics piping kits for heating systems, made of multilayer composite
pipes and compression fittings
Plastics piping kits for heating systems made of cross-linked medium
density polyethylene (PE-MDX)
Plastics piping kits for heating systems, consisting of pipes made of PB-R
and mechanical and/or welded fittings
Plastics piping kits for heating systems, consisting of pipes made of PB-H
Type II and mechanical and/or welded fittings
Light gauge secondary structures
Metal Frame self-storage system
Alkali resistant glass fibres containing zirconium dioxide for the use in
concrete
Spun columns with reinforcement areas of longitudinal reinforcement
higher than 8% up to 16% of the area of the concrete section
LAMI Glass fibre reinforced polyester doors (LAMI GTP doors)
Hot rolled products and structural components made of steel grades
Q325B, Q235D,Q345B and Q345D
Glass-fibre reinforced plastic bar used as reinforcing bar of concrete
Kit consisting of chimney flue liner, made of glass fibres, mineral and
organic substances and ancillaries
Strength graded finger jointed structural timber – solid, tension proof
loaded, structural timber beams and, used as laminations, flatwise laminated
beams with up to 4 laminations
Flexible plug expansion joint for road bridges
Mechanical splice for reinforcing steel bars
Ventilation ducts made from insulation boards
Kit for system stove-chimneys with clay/ceramic flue liner and integrated
stove
Structural glazing system mechanically supported with fix points
Structural glazing system mechanically supported with holders
B
Roof Hatches, Floor, Wall and Ceiling Doors providing access or for use
as an emergency door / with or without fire resistance
Blind rivets for metal members and sheeting
Vacuum insulation panel (VIP) with factory applied protection layers
Lift control pot bearing
Load bearing external wall kit
Kit for load bearing masonry subject to seismic actions
Internal wall-and floor- covering made of coconut shells
Sealing device for waterproofing form tie holes, holes or cast-in pipes in
concrete casting and masonry walls
Liquid applied roof waterproofing kit based on a rubber solution
Early Suppression, Fast Response (ESFR), K240 to K360, Upright and
Pendent Automatic Fire Sprinklers
Polyester fibre mat with embedded silica aerogel
Steel Lighting columns
Strength graded structural timber - square edged logs with wane
Monolithic or laminated beam and wall logs made of timber
Kit for friction pipe anchors
Fire resistant access panel for installation in walls or ceiling
Plastics piping kits as a transport system of hot and cold water, intended
for human consumption, consisting of pipes made from PB-H Type II and
mechanical and/or welded fittings
Fireplaces Fired by Solid Fuel – Operated Independent of the Room Air
Low lambda composite board for internal use
Columns of glued laminated timber with 2 to 4 lamellas for timber frames
for buildings
Reconstituted stones for wall cladding
Load bearing thermal insulation base tub of expanded polystyrene (EPS)
Sun Tunnel
B
Flexible plug expansion joint for railway bridges
375. Flexible plug expansion joint for railway bridges
Prefabricated elements for sea wall protection
376. Prefabricated elements for sea wall protection
Stay Cable system
377. Stay Cable system
With sprinkler kit fire protected steel structures
378. With sprinkler kit fire protected steel structures
Prefabricated building units based on glass fibre reinforced polyester
379. (GRP) Prefabricated
building units
based
on a on steel
glass
grill fibre
floor reinforced polyester
structural components
mounted
(GRP) structural components mounted on a steel grill floor
Premix for ultra High Performance Fibre-Reinforced Concrete/Mortar ”.
380. Premix for ultra High Performance Fibre-Reinforced Concrete/Mortar ”.
Schedule V to the principal regulations shall be substituted as follows
Substitutes
3. V 3. to the
Schedule
principal V
to the principal
regulations
shall be
V to Substitutes Schedule
Schedule
regulations
shall be substituted
as follows
Substitutes
3. V to V to the principal
the principal
substituted
as
follows
the principal regulations.
regulations.
regulations.
“Schedule V
“Schedule V
LIST OF HARMONISED STANDARDS
LIST OF HARMONISED STANDARDS
Harmonised standards of construction products for which CE marking is
Harmonised
mandatory standards of construction products for which CE marking is
mandatory
Applicability Co-Existence
Reference and Title of Harmonised Standard
Period End-
Co-Existence
Date 2
Applicability
Date End-
Reference and Title of Harmonised Standard
Period
Date 2
Date
EN 1:1998 as implemented nationally by MSA EN
1/1/2008
1/1/2009
1:2000
EN
1:1998 as implemented nationally by MSA EN
Flued oil stoves with vaporizing burners
1/1/2008
1/1/2009
1:2000
Flued oil stoves with vaporizing burners
! " #$%&"'("$))*+,$-+*+%."'("%/&"0%$12$32"$0"$"/$34'1+0&2"563')&$1"0%$12$32
!
7 " #$%&"'("$))*+,$-+*+%."'("%/&"0%$12$32"$0"$"/$34'1+0&2"563')&$1"0%$12$32
8$4&"2$%&"$0"%/&"2$%&"'("9+%/23$9$*"'(",'1(*+,%+1:"1$%+'1$*"%&,/1+,$*"0)&,+(+,$%+'10;"
" 8$4&"2$%&"$0"%/&"2$%&"'("9+%/23$9$*"'(",'1(*+,%+1:"1$%+'1$*"%&,/1+,$*"0)&,+(+,$%+'10;"
$(%&3"9/+,/")3&064)%+'1"'(",'1('34+%."460%"-&"-$0&2"6)'1"/$34'1+0&2"563')&$1"
$(%&3"9/+,/")3&064)%+'1"'(",'1('34+%."460%"-&"-$0&2"6)'1"/$34'1+0&2"563')&$1"
0)&,+(+,$%+'10"</$34'1+0&2"0%$12$320"'3"563')&$1"=&,/1+,$*">))3'?$*0@;"$?$+*$-*&"$%"
0)&,+(+,$%+'10"</$34'1+0&2"0%$12$320"'3"563')&$1"=&,/1+,$*">))3'?$*0@;"$?$+*$-*&"$%"
)$:&"!""#$%%&'(&)*+#,(&)%&-"&*#*./&%-&0,##*+,'!%-,-1+%.-1&2('3453)/&,'".+-6'#1(!/!'("
)$:&"!""#$%%&'(&)*+#,(&)%&-"&*#*./&%-&0,##*+,'!%-,-1+%.-1&2('3453)/&,'".+-6'#1(!/!'("
%/&"563')&$1"A'44+00+'1"B>B#C"+1('34$%+'1"0.0%&4D"E/&1"$"/$34'1+0&2"0%$12$32"+0"
%/&"563')&$1"A'44+00+'1"B>B#C"+1('34$%+'1"0.0%&4D"E/&1"$"/$34'1+0&2"0%$12$32"+0"
3&)*$,&2"9+%/"$"1&9"?&30+'1;"-'%/"?&30+'10"'("%/&"0%$12$32",$1"-&"60&2"('3"%/&")63)'0&"
'("$((+F+1:"A5"4$3G+1:"61%+*"%/&"&12"'("%/&",'&F+0%&1,&")&3+'2D "
3&)*$,&2"9+%/"$"1&9"?&30+'1;"-'%/"?&30+'10"'("%/&"0%$12$32",$1"-&"60&2"('3"%/&")63)'0&"
'("$((+F+1:"A5"4$3G+1:"61%+*"%/&"&12"'("%/&",'&F+0%&1,&")&3+'2D "
214/277
214/277
EN 1:1998/A1:2007 as implemented nationally by
MSA EN 1:2000/A1:2007
Flued oil stoves with vaporizing burners
EN 40-4:2005 as implemented nationally by MSA
EN 40-4:2006
Lighting columns - Part 4: Requirements for
reinforced and prestressed concrete lighting columns
EN 40-4:2005/AC:2006 as implemented nationally
by MSA EN 40-4:2006/AC:2006
Lighting columns - Part 4: Requirements for
reinforced and prestressed concrete lighting columns
EN 40-5:2002 as implemented nationally by MSA
EN 40-5:2002
Lighting columns - Part 5: Requirements for steel
lighting columns
EN 40-6:2002 as implemented nationally by MSA
EN 40-6:2002
Lighting columns - Part 6: Requirements for
aluminium lighting columns
EN 40-7:2002 as implemented nationally by MSA
EN 40-7:2003
Lighting columns - Part 7: Requirements for fibre
reinforced polymer composite lighting columns
EN 54-2:1997 as implemented nationally by MSA
EN 54-2:2000
Fire detection and fire alarm systems - Part 2: Control
and indicating equipment
EN 54-2:1997/A1:2006 as implemented nationally
by MSA EN 54-2:2000/A1:2006
Fire detection and fire alarm systems - Part 2: Control
and indicating equipment
EN 54-2:1997/AC:1999 as implemented nationally
by MSA EN 54-2:2000/AC:1999
Fire detection and fire alarm systems - Part 2: Control
and indicating equipment
B
EN 54-3:2001 as implemented nationally by MSA
EN 54-3:2001
Fire detection and fire alarm systems - Part 3: Fire
alarm devices - Sounders
EN 54-3:2001/A1:2002 as implemented nationally
by MSA EN 54-3:2001/A1:2002
Fire detection and fire alarm systems - Part 3: Fire
alarm devices - Sounders
EN 54-3:2001/A2:2006 as implemented nationally
by MSA EN 54-3:2001/A2:2006
Fire detection and fire alarm systems - Part 3: Fire
alarm devices - Sounders
EN 54-4:1997 as implemented nationally by MSA
EN 54-4:2000
Fire detection and fire alarm systems - Part 4: Power
supply equipment
EN 54-4:1997/A1:2002 as implemented nationally
by MSA EN 54-4:2000/A1:2003
Fire detection and fire alarm systems - Part 4: Power
supply equipment
EN 54-4:1997/A2:2006 as implemented nationally
by MSA EN 54-4:2000/A2:2006
Fire detection and fire alarm systems - Part 4: Power
supply equipment
EN 54-4:1997/AC:1999 as implemented nationally
by MSA EN 54-4:2000/AC:1999
Fire detection and fire alarm systems - Part 4: Power
supply equipment
EN 54-5:2000 as implemented nationally by MSA
EN 54-5:2000
Fire detection and fire alarm systems - Part 5: Heat
detectors - Point detectors
EN 54-5:2000/A1:2002 as implemented nationally
by MSA EN 54-5:2000/A1:2002
Fire detection and fire alarm systems - Part 5: Heat
detectors - Point detectors
EN 54-7:2000 as implemented nationally by MSA
EN 54-7:2000
Fire detection and fire alarm systems - Part 7: Smoke
detectors - Point detectors using scattered light,
transmitted light or ionization
EN 54-7:2000/A1:2002 as implemented nationally
by MSA EN 54-7:2000/A1:2002
Fire detection and fire alarm systems - Part 7: Smoke
detectors - Point detectors using scattered light,
transmitted light or ionization
EN 54-7:2000/A2:2006 as implemented nationally
by MSA EN 54-7:2000/A2:2006
Fire detection and fire alarm systems - Part 7: Smoke
detectors - Point detectors using scattered light,
transmitted light or ionization
EN 54-10:2002 as implemented nationally by MSA
EN 54-10:2002
Fire detection and fire alarm systems - Part 10: Flame
detectors - Point detectors
EN 54-10:2002/A1:2005 as implemented nationally
by MSA EN 54-10:2002/A1:2005
Fire detection and fire alarm systems - Part 10: Flame
detectors - Point detectors
EN 54-11:2001 as implemented nationally by MSA
EN 54-11:2001
Fire detection and fire alarm systems - Part 11
Manual call points
EN 54-11:2001/A1:2005 as implemented nationally
by MSA EN 54-11:2001/A1:2005
Fire detection and fire alarm systems - Part 11
Manual call points
EN 54-12:2002 as implemented nationally by MSA
EN 54-12:2003
Fire detection and fire alarm systems – Part 12: Smoke
detectors – Line detectors using an optical light beam
EN 54-16:2008 as implemented nationally by MSA
EN 54-16:2008
Fire detection and fire alarm systems - Part 16: Voice
alarm control and indicating equipment
B
EN 54-17:2005 as implemented nationally by MSA
EN 54-17:2006
Fire detection and fire alarm systems - Part 17: Short-
circuit isolators
EN 54-17:2005/AC:2007 as implemented nationally
by MSA EN 54-17:2006/AC:2007
Fire detection and fire alarm systems - Part 17: Short-
circuit isolators
EN 54-18:2005 as implemented nationally by MSA
EN 54-18:2006
Fire detection and fire alarm systems - Part 18
Input/output devices
EN 54-18:2005/AC:2007 as implemented nationally
by MSA EN 54-18:2006/AC:2007
Fire detection and fire alarm systems - Part 18
Input/output devices
EN 54-20:2006 as implemented nationally by MSA
EN 54-20:2006
Fire detection and fire alarm systems - Part 20
Aspirating smoke detectors
EN 54-20:2006/AC:2008 as implemented nationally
by MSA EN 54-20:2006/AC:2008
Fire detection and fire alarm systems - Part 20
Aspirating smoke detectors
EN 54-21:2006 as implemented nationally by MSA
EN 54-21:2006
Fire detection and fire alarm systems - Part 21: Alarm
transmission and fault warning routing equipment
EN 54-23:2010 as implemented nationally by MSA
EN 54-23:2010
Fire detection and fire alarm systems - Part 23: Fire
alarm devices - Visual alarm devices
EN 54-24:2008 as implemented nationally by MSA
EN 54-24:2008
Fire detection and fire alarm systems - Part 24
Components of voice alarm systems – Loudspeakers
EN 54-25:2008 as implemented nationally by MSA
EN 54-25:2008
Fire detection and fire alarm systems - Part 25
Components using radio links
EN 54-25:2008/AC:2010 as implemented nationally
by MSA EN 54-25:2008/AC:2010
Fire detection and fire alarm systems - Part 25
Components using radio links
EN 179:2008 as implemented nationally by MSA
EN 179:2008
Building hardware - Emergency exit devices operated
by a lever handle or push pad, for use on escape routes
- Requirements and test methods
EN 197-1:2000 as implemented nationally by MSA
EN 197-1:2000
Cement-Part 1: Composition, specifications and
conformity criteria for common cements
EN 197-1:2000/A1:2004 as implemented nationally
by MSA EN 197-1:2000/A1:2004
Cement-Part 1: Composition, specifications and
conformity criteria for common cements
EN 197-1:2000/A3:2007 as implemented nationally
by MSA EN 197-1:2000/A3:2007
Cement-Part 1: Composition, specifications and
conformity criteria for common cements
EN 197-4:2004 as implemented nationally by MSA
EN 197-4:2004
Cement – Part 4: Composition, specifications and
conformity criteria for low early strength blastfurnace
cements
EN 295-10:2005 as implemented nationally by MSA
EN 295-10:2005
Vitrified clay pipes and fittings and pipe joints for
drains and sewers - Part 10: Performance requirements
EN 413-1:2004 as implemented nationally by MSA
EN 413-1:2004
Masonry cement – Part 1: Composition, specifications
and conformity criteria
B
EN 416-1:2009 as implemented nationally by MSA
EN 416-1:2009
Single burner gas-fired overhead radiant tube heaters
for non-domestic use - Part 1: Safety
EN 438-7:2005 as implemented nationally by MSA
EN 438-7:2005
High-pressure decorative laminates (HPL) - Sheets
based on thermosetting resins (Usually called
Laminates) - Part 7: Compact laminate and HPL
composite panels for internal and external wall and
ceiling finishes
EN 442-1:1995 as implemented nationally by MSA
EN 442-1:2000
Radiators and convectors – Part 1: Technical
specifications and requirements
EN 442-1:1995/A1:2003 as implemented nationally
by MSA EN 442-1:2000/A1:2003
Radiators and convectors – Part 1: Technical
specifications and requirements
EN 450-1:2005+A1:2007 as implemented nationally
by MSA EN 450-1:2005+A1:2007
Fly ash for concrete - Part 1: Definition, specifications
and conformity criteria
EN 459-1:2010 as implemented nationally by MSA
EN 459-1:2010
Building lime - Part 1: Definitions, specifications and
conformity criteria
EN 490:2004 as implemented nationally by MSA
EN 490:2005
Concrete roofing tiles and fittings for roof covering
and wall cladding - Product specifications
EN 490:2004/A1:2006 as implemented nationally by
MSA EN 490:2005/A1:2006 Concrete roofing tiles
and fittings for roof covering and wall cladding -
Product specifications
EN 492:2004 as implemented nationally by MSA
EN 492:2005
Fibre-cement slates and fittings - Product specification
and test methods
EN 492:2004/A1:2005 as implemented nationally by
MSA EN 492:2005/A1:2005
Fibre-cement slates and fittings - Product specification
and test methods
EN 492:2004/A2:2006 as implemented nationally by
MSA EN 492:2005/A2:2006
Fibre-cement slates and fittings - Product specification
and test methods
EN 494:2004+A3:2007 as implemented nationally
by MSA EN 494:2005+A3:2007
Fibre-cement profiled sheets and fittings - Product
specification and test methods
EN 516:2006 as implemented nationally by MSA
EN 516:2006
Prefabricated accessories for roofing - Installations for
roof access - Walkways, treads and steps
EN 517:2006 as implemented nationally by MSA
EN 517:2006
Prefabricated accessories for roofing - Roof safety
hooks
EN 520:2004+A1:2009 as implemented nationally
by MSA EN 520:2004+A1:2009
Gypsum plasterboards – Definitions, requirements and
test methods
EN 523:2003 as implemented nationally by MSA
EN 523:2003
Steel strip sheaths for prestressing tendons –
Terminology, requirements, quality control
EN 534:2006+A1:2010 as implemented nationally
by MSA EN 534:2006+A1:2010
Corrugated bitumen sheets - Product specification and
test methods
EN 544:2005 as implemented nationally by MSA
EN 544:2006
Bitumen shingles with mineral and/or synthetic
reinforcements - Product specification and test
methods
B
EN 572-9:2004 as implemented nationally by MSA
EN 572-9:2004
Glass in building - Basic soda lime silicate glass
products - Part 9: Evaluation of conformity/Product
standard
EN 588-2:2001 as implemented nationally by MSA
EN 588-2:2002
Fibre cement pipes for drains and sewers-Part 2
Manholes and inspection chambers
EN 598:2007+A1:2009 as implemented nationally
by MSA EN 598:2007+A1:2009
Ductile iron pipes, fittings, accessories and their joints
for sewerage applications - Requirements and test
methods
EN 621:2009 as implemented nationally by MSA
EN 621:2009
Non-domestic gas-fired forced convection air heaters
for space heating not exceeding a net heat input of 300
kW, without a fan to assist transportation of
combustion air and/or combustion products
EN 671-1:2001 as implemented nationally by MSA
EN 671-1:2001
Fixed firefighting systems - Hose systems - Part 1
Hose reels with semi-rigid hose
EN 671-1:2001/AC:2002 as implemented nationally
by MSA EN 671-1:2001/AC:2002
Fixed firefighting systems - Hose systems - Part 1
Hose reels with semi-rigid hose
EN 671-2:2001 as implemented nationally by EN
671-2:2001
Fixed firefighting systems - Hose systems - Part 2
Hose systems with lay-flat hose
EN 671-2:2001/A1:2004 as implemented nationally
by EN 671-2:2001/A1:2004
Fixed firefighting systems - Hose systems - Part 2
Hose systems with lay-flat hose
EN 681-1:1996 as implemented nationally by MSA
EN 681-1:2000
Elastomeric seals - Material requirements for pipe
joint seal used in water and drainage applications -
Part 1: Vulcanized rubber
EN 681-1:1996/A1:1998 as implemented nationally
by MSA EN 681-1:2000/A1:2000
Elastomeric seals - Material requirements for pipe
joint seal used in water and drainage applications -
Part 1: Vulcanized rubber
EN 681-1:1996/A2:2002 as implemented nationally
by MSA EN 681-1:2000/A2:2002
Elastomeric seals - Material requirements for pipe
joint seal used in water and drainage applications -
Part 1: Vulcanized rubber
EN 681-1:1996/A3:2005 as implemented nationally
by MSA EN 681-1:2000/A3:2005
Elastomeric seals - Material requirements for pipe
joint seal used in water and drainage applications -
Part 1: Vulcanized rubber
EN 681-2:2000 as implemented nationally by MSA
EN 681-2:2000
Elastomeric seals - Material requirements for pipe
joint seals used in water and drainage applications -
Part 2: Thermoplastic elastomers
EN 681-2:2000/A1:2002 as implemented nationally
by MSA EN 681-2:2000/A1:2002
Elastomeric seals - Material requirements for pipe
joint seals used in water and drainage applications -
Part 2: Thermoplastic elastomers
EN 681-2:2000/A2:2005 as implemented nationally
by MSA EN 681-2:2000/A2:2005
Elastomeric seals - Material requirements for pipe
joint seals used in water and drainage applications -
Part 2: Thermoplastic elastomers
EN 681-3:2000 as implemented nationally by MSA
EN 681-3:2000
Elastomeric seals - Material requirements for joint
seals used in water and drainage applications - Part 3
Cellular materials of vulcanized rubber
EN 681-3:2000/A1:2002 as implemented nationally
by MSA EN 681-3:2000/A1:2002
Elastomeric seals - Material requirements for joint
seals used in water and drainage applications - Part 3
Cellular materials of vulcanized rubber
EN 681-4:2000 as implemented nationally by MSA
EN 681-4:2000
Elastomeric seals - Material requirements for pipe
joint seals used in water and drainage applications -
Part 4: Cast polyurethane sealing elements
B
EN 681-4:2000/A1:2002 as implemented nationally
by MSA EN 681-4:2000/A1:2002
Elastomeric seals - Material requirements for pipe
joint seals used in water and drainage applications -
Part 4: Cast polyurethane sealing elements
EN 682:2002 as implemented nationally by MSA
EN 682:2002
Elastomeric seals - Materials requirements for seals
used in pipes and fittings carrying gas and
hydrocarbon fluids
EN 771-1:2003 as implemented nationally by MSA
EN 771-1:2003
Specification for masonry units - Part 1: Clay masonry
units
EN 771-1:2003/A1:2005 as implemented nationally
by MSA EN 771-1:2003/A1:2005
Specification for masonry units - Part 1: Clay masonry
units
EN 771-2:2003 as implemented nationally by MSA
EN 771-2:2003
Specification for masonry units – Part 2: Calcium
silicate masonry units
EN 771-2:2003/A1:2005 as implemented nationally
by MSA EN 771-2:2003/A1:2005
Specification for masonry units – Part 2: Calcium
silicate masonry units
EN 771-3:2003 as implemented nationally by MSA
EN 771-3:2003
Specification for masonry units – Part 3: Aggregate
concrete masonry units – Part 3: Aggregate concrete
masonry units (Dense and light-weight aggregates)
EN 771-3:2003/A1:2005 as implemented nationally
by MSA EN 771-3:2003/A1:2005
Specification for masonry units – Part 3: Aggregate
concrete masonry units – Part 3: Aggregate concrete
masonry units (Dense and light-weight aggregates)
EN 771-4:2003 as implemented nationally by MSA
EN 771-4:2003
Specification for masonry units – Part 4: Autoclaved
aerated concrete masonry units
EN 771-4:2003/A1:2005 as implemented nationally
by MSA EN 771-4:2003/A1:2005
Specification for masonry units – Part 4: Autoclaved
aerated concrete masonry units
EN 771-5:2003 as implemented nationally by MSA
EN 771-5:2004
Specification for masonry units – Part 5
Manufactured stone masonry units
EN 771-5:2003/A1:2005 as implemented nationally
by MSA EN 771-5:2004/A1:2005
Specification for masonry units – Part 5
Manufactured stone masonry units
EN 771-6:2005 as implemented nationally by MSA
EN 771-6:2005
Specification for masonry units - Part 6: Natural stone
masonry units
EN 777-1:2009 as implemented nationally by MSA
EN 777-1:2009
Multi-burner gas-fired overhead radiant tube heater
systems for non-domestic use - Part 1: System D -
Safety
EN 777-2:2009 as implemented nationally by MSA
EN 777-2:2009
Multi-burner gas-fired overhead radiant tube heater
systems for non-domestic use - Part 2: System E –
Safety
EN 777-3:2009 as implemented nationally by MSA
EN 777-3:2009
Multi-burner gas-fired overhead radiant tube heater
systems for non domestic use - Part 3: System F –
Safety
EN 777-4:2009 as implemented nationally by MSA
EN 777-4:2009
Multi-burner gas-fired overhead radiant tube heater
systems for non-domestic use - Part 4: System H -
Safety
EN 778:2009 as implemented nationally by MSA
EN 778:2009
Domestic gas-fired forced convection air heaters for
space heating not exceeding a net heat input of 70 kW,
without a fan to assist transportation of combustion air
and/or combustion products
B
EN 845-1:2003+A1:2008 as implemented nationally
by MSA EN 845-1:2003+A1:2008
Specification for ancillary components for masonry -
Part 1: Ties, tension straps, hangers and brackets
EN 845-2:2003 as implemented nationally by MSA
EN 845-2:2003
Specification for ancillary components for masonry -
Part 2: Lintels
EN 845-3:2003+A1:2008 as implemented nationally
by MSA EN 845-3:2003+A1:2008
Specification for ancillary components for masonry -
Part 3: Bed joint reinforcement of steel meshwork
EN 858-1:2002 as implemented nationally by MSA
EN 858-1:2002
Separator systems for light liquids (e/g/ oil and petrol)
- Part 1: Principles of product design, performance and
testing, marking and quality control
EN 858-1:2002/A1:2004 as implemented nationally
by MSA EN 858-1:2002/A1:2004
Separator systems for light liquids (e/g/ oil and petrol)
- Part 1: Principles of product design, performance and
testing, marking and quality control
EN 877:1999 as implemented nationally by MSA
EN 877:2000
Cast iron pipes and fittings, their joints and accessories
for the evacuation of water from buildings -
Requirements, test methods and quality assurance
EN 877:1999/A1:2006 as implemented nationally
by MSA EN 877:2000/A1:2006
Cast iron pipes and fittings, their joints and accessories
for the evacuation of water from buildings -
Requirements, test methods and quality assurance
EN 877:1999/A1:2006/AC:2008 as implemented
nationally by MSA EN 877:2000/A1:2006/AC:2008
Cast iron pipes and fittings, their joints and accessories
for the evacuation of water from buildings -
Requirements, test methods and quality assurance
EN 934-2:2009 as implemented nationally by MSA
EN 934-2:2009
Admixtures for concrete, mortar and grout - Part 2
Concrete admixtures - Definitions, requirements,
conformity, marking and labeling
EN 934-3:2009 as implemented nationally by MSA
EN 934-3:2009
Admixtures for concrete, mortar and grout - Part 3
Admixtures for masonry mortar - Definitions,
requirements, conformity, marking and labelling
EN 934-4:2009 as implemented nationally by MSA
EN 934-4:2009
Admixtures for concrete, mortar and grout - Part 4
Admixtures for grout for prestressing tendons -
Definitions, requirements, conformity, marking and
labelling
EN 934-5:2007 as implemented nationally by MSA
EN 934-5:2007
Admixtures for concrete, mortar and grout - Part 5
Admixtures for sprayed concrete - Definitions,
requirements, conformity, marking and labeling
EN 969:2009 as implemented nationally by MSA
EN 969:2009
Ductile iron pipes, fittings, accessories and their joints
for gas pipelines - Requirements and test methods
EN 997:2003 as implemented nationally by MSA
EN 997:2003
WC pans and WC suites with integral trap
EN 997:2003/A1:2006 as implemented nationally by
MSA EN 997:2003/A1:2007
WC pans and WC suites with integral trap
EN 998-1:2010 as implemented nationally by MSA
EN 998-1:2010
Specification for mortar for masonry – Part 1
Rendering and plastering mortar
EN 998-2:2010 as implemented nationally by MSA
EN 998-2:2010
Specification for mortar for masonry - Part 2: Masonry
mortar
EN 1020:2009 as implemented nationally by MSA
EN 1020:2009
Non-domestic forced convection gas-fired air heaters
for space heating not exceeding a net heat input of 300
kW incorporating a fan to assist transportation of
combustion air or combustion products
B
EN 1036-2:2008 as implemented nationally by MSA
EN 1036-2:2008
Glass in building - Mirrors from silver-coated float
glass for internal use - Part 2: Evaluation of
conformity; product standard
EN 1051-2:2007 as implemented nationally by MSA
EN 1051-2:2007
Glass in building - Glass blocks and glass pavers - Part
2: Evaluation of conformity/Product standard
EN 1057:2006+A1:2010 as implemented nationally
by MSA EN 1057:2006+A1:2010
Copper and copper alloys - Seamless, round copper
tubes for water and gas in sanitary and heating
applications
EN 1090-1:2009 as implemented nationally by
MSA EN 1090-1:2009
Execution of steel structures and aluminium structures
- Part 1: Requirements for conformity assessment of
structural components
EN
1090-1:2009/AC:2010
as
implemented
nationally by MSA EN 1090-1:2009/AC:2010
Execution of steel structures and aluminium structures
- Part 1: Requirements for conformity assessment of
structural components
EN 1096-4:2004 as implemented nationally by MSA
EN 1096-4:2004
Glass in building - Coated glass - Part 4: Evaluation of
conformity/Product standard
EN 1123-1:1999 as implemented nationally by
MSA EN 1123-1:2000
Pipes and fitting of longitudinally welded hot-dip
galvanized steel pipes with spigot and socket for waste
water systems – Part 1: Requirements, testing, quality
control
EN
1123-1:1999/A1:2004
as
implemented
nationally by MSA EN 1123-1:2000/A1:2004
Pipes and fitting of longitudinally welded hot-dip
galvanized steel pipes with spigot and socket for waste
water systems – Part 1: Requirements, testing, quality
control
EN 1124-1:1999 as implemented nationally by
MSA EN 1124-1:2000
Pipes and fitting of longitudinally welded stainless
steel pipes with spigot and socket for waste water
systems – Part 1: Requirements, testing, quality
control
EN
1124-1:1999/A1:2004
as
implemented
nationally by MSA EN 1124-1:2000/A1:2004
Pipes and fitting of longitudinally welded stainless
steel pipes with spigot and socket for waste water
systems – Part 1: Requirements, testing, quality
control
EN 1125:2008 as implemented nationally by MSA
EN 1125:2008
Building hardware - Panic exit devices operated by a
horizontal bar, for use on escape routes -
Requirements and test methods
EN 1154:1996 as implemented nationally by MSA
EN 1154:2000
Building hardware - Controlled door closing devices -
Requirements and test methods
EN 1154:1996/A1:2002 as implemented nationally
by MSA EN 1154:2000/A1:2003
Building hardware - Controlled door closing devices -
Requirements and test methods
EN 1154:1996/A1:2002/AC:2006 as implemented
nationally
by
MSA
EN
1154:2000/A1:2003/AC:2006
Building hardware - Controlled door closing devices -
Requirements and test methods
EN 1155:1997 as implemented nationally by MSA
EN 1155:2000
Building hardware - Electrically powered hold-open
devices for swing doors - Requirements and test
methods
EN 1155:1997/A1:2002 as implemented nationally
by MSA EN 1155:2000/A1:2003
Building hardware - Electrically powered hold-open
devices for swing doors - Requirements and test
methods
EN 1155:1997/A1:2002/AC:2006 as implemented
nationally
by
MSA
EN
1155:2000/A1:2003/AC:2006
Building hardware - Electrically powered hold-open
devices for swing doors - Requirements and test
methods
EN 1158:1997 as implemented nationally by MSA
EN 1158:2000
Building hardware - Door coordinator devices -
Requirements and test methods
B
EN 1158:1997/A1:2002 as implemented nationally
by MSA EN 1158:2000/A1:2003
Building hardware - Door coordinator devices -
Requirements and test methods
EN 1158:1997/A1:2002/AC:2006 as implemented
nationally
by
MSA
EN
1158:2000/A1:2003/AC:2006
Building hardware - Door coordinator devices -
Requirements and test methods
EN 1168:2005+A2:2009 as implemented nationally
by MSA EN 1168:2005+A2:2009
Precast concrete products - Hollow core slabs
EN
1279-5:2005+A2:2010
as
implemented
nationally by MSA EN 1279-5:2005+A2:2010
Glass in building - Insulating glass units - Part 5
Evaluation of conformity
EN 1304:2005 as implemented nationally by MSA
EN 1304:2005
Clay roofing tiles and fittings - Product definitions and
specifications
EN
1317-5:2007+A1:2008
as
implemented
nationally by MSA EN 1317-5:2007+A1:2008
Road restraint systems - Part 5: Product requirements
and evaluation of conformity for vehicle restraint
systems
EN 1319:2009 as implemented nationally by MSA
EN 1319:2009
Domestic gas-fired forced convection air heaters for
space heating, with fan-assisted burners not exceeding
a net heat input of 70 kW
EN 1337-3:2005 as implemented nationally by MSA
EN 1337-3:2005
Structural bearings - Part 3: Elastomeric bearings
EN 1337-4:2004 as implemented nationally by
MSA EN 1337-4:2004
Structural bearings – Part 4: Roller bearings
EN
1337-4:2004/AC:2007
as
implemented
nationally by MSA EN 1337-4:2004/AC:2007
Structural bearings – Part 4: Roller bearings
EN 1337-5:2005 as implemented nationally by
MSA EN 1337-5:2005
Structural bearings - Part 5: Pot bearings
EN 1337-6:2004 as implemented nationally by
MSA EN 1337-6:2004
Structural bearings – Part 6: Rocker bearings
EN 1337-7:2004 as implemented nationally by
MSA EN 1337-7:2004
Structural bearings-Part 7: Spherical and cylindrical
PTFE bearings
EN 1337-8:2007 implemented nationally by MSA
EN 1337-8:2007
Structural bearings - Part 8: Guide Bearings and
Restraint Bearings
EN 1338:2003 as implemented nationally by MSA
EN 1338:2003
Concrete paving blocks - Requirements and test
methods
EN 1338:2003/AC:2006 as implemented nationally
by MSA EN 1338:2003/AC:2006
Concrete paving blocks - Requirements and test
methods
EN 1339:2003 as implemented nationally by MSA
EN 1339:2003
Concrete paving flags – Requirements and test
methods
EN 1339:2003/AC:2006 as implemented nationally
by MSA EN 1339:2003/AC:2006
Concrete paving flags – Requirements and test
methods
B
EN 1340:2003 as implemented nationally by MSA
EN 1340:2003
Concrete kerb units – Requirements and test methods
EN 1340:2003/AC:2006 as implemented nationally
by MSA EN 1340:2003/AC:2006
Concrete kerb units – Requirements and test methods
EN 1341:2001 as implemented nationally by MSA
EN 1341:2002
Slabs of natural stone for external paving-
Requirements and test methods
EN 1342:2001 as implemented nationally by MSA
EN 1342:2002
Setts of natural stone for external paving-
Requirements and test methods
EN 1343:2001 as implemented nationally by MSA
EN 1343:2002
Kerbs of natural stone for external paving-
Requirements and test methods
EN 1344:2002 as implemented nationally by MSA
EN 1344:2002
Clay pavers - Requirements and test methods
EN 1423:1997 as implemented nationally by MSA
EN 1423:2000
Road marking materials – Drop on materials – Glass
beads, antiskid aggregates and mixtures of the two
EN 1423:1997/A1:2003 as implemented nationally
by MSA EN 1423:2000/A1:2003
Road marking materials – Drop on materials – Glass
beads, antiskid aggregates and mixtures of the two
EN 1433:2002 as implemented nationally by MSA
EN 1433:2003
Drainage channels for vehicular and pedestrian areas –
Classification, design and testing requirements,
marking and evaluation of conformity
EN 1433:2002/A1:2005 as implemented nationally
by MSA EN 1433:2003/A1:2005
Drainage channels for vehicular and pedestrian areas –
Classification, design and testing requirements,
marking and evaluation of conformity
EN 1457:1999 as implemented nationally by MSA
EN 1457:2000
Chimneys – Clay/ceramic flue liners – Requirements
and test methods
EN 1457:1999/A1:2002 as implemented nationally
by MSA EN 1457:2000/A1:2002
Chimneys – Clay/ceramic flue liners – Requirements
and test methods
EN 1457:1999/AC:2006 as implemented nationally
by MSA EN 1457:2000/AC:2006
Chimneys – Clay/ceramic flue liners – Requirements
and test methods
EN 1457:1999/A1:2002/AC:2007 as implemented
nationally
by
MSA
EN
1457:2000/A1:2002/AC:2007
Chimneys – Clay/ceramic flue liners – Requirements
and test methods
EN 1463-1:2009 as implemented nationally by MSA
EN 1463-1:2009
Road marking materials - Retroflecting road studs -
Part 1: Initial performance requirements
EN 1469:2004 as implemented nationally by MSA
EN 1469:2004
Natural stone products - Slabs for cladding –
Requirements
EN 1504-2:2004 as implemented nationally by MSA
EN 1504-2:2004
Products and systems for the protection and repair of
concrete structures - Definitions, requirements, quality
control and evaluation of conformity - Part 2: Surface
protection systems for concrete
EN 1504-3:2005 as implemented nationally by MSA
EN 1504-3:2006
Products and systems for the protection and repair of
concrete structures - Definitions, requirements, quality
control and evaluation of conformity - Part 3
Structural and non-structural repair
B
EN 1504-4:2004 as implemented nationally by MSA
EN 1504-4:2004
Products and systems for the protection and repair of
concrete structures - Definitions, requirements, quality
control and evaluation of conformity - Part 4
Structural bonding
EN 1504-5:2004 as implemented nationally by MSA
EN 1504-5:2004
Products and systems for the protection and repair of
concrete structures - Definitions, requirements, quality
control and evaluation of conformity - Part 5: Concrete
injection
EN 1504-6:2006 as implemented nationally by MSA
EN 1504-6:2006
Products and systems for the protection and repair of
concrete structures - Definitions, requirements, quality
control and evaluation of conformity - Part 6
Anchoring of reinforcing steel bar
EN 1504-7:2006 as implemented nationally by MSA
EN 1504-7:2006
Products and systems for the protection and repair of
concrete structures - Definitions, requirements, quality
control and evaluation of conformity - Part 7
Reinforcement corrosion protection
EN 1520:2002 as implemented nationally by MSA
EN 1520:2003
Prefabricated reinforced components of lightweight
aggregate concrete with open structure
EN 1520:2002/AC:2003 as implemented nationally
by MSA EN 1520:2003/AC:2003
Prefabricated reinforced components of lightweight
aggregate concrete with open structure
EN 1748-1-2:2004 as implemented nationally by
MSA EN 1748-1-2:2004
Glass in building – Special basic products -
Borosilicate glasses - Part 1-2: Evaluation of
conformity/Product standard
EN 1748-2-2:2004 as implemented nationally by
MSA EN 1748-2-2:2004
Glass in building – Special basic products - Glass
ceramics - Part 2-2: Evaluation of conformity/Product
standard
EN 1806:2006 as implemented nationally by MSA
EN 1806:2006
Chimneys - Clay/ceramic flue blocks for single wall
chimneys - Requirements and test methods
EN 1825-1:2004 as implemented nationally by MSA
EN 1825-1:2004
Grease separators - Part 1: Principles of design,
performance and testing, marking and quality control
EN
1825-1:2004/AC:2006
as
implemented
nationally by MSA EN 1825-1:2004/AC:2006
Grease separators - Part 1: Principles of design,
performance and testing, marking and quality control
EN 1856-1:2009 as implemented nationally by MSA
EN 1856-1:2009
Chimneys - Requirements for metal chimneys - Part 1
System chimney products
EN 1856-2:2009 as implemented nationally by MSA
EN 1856-2:2009
Chimneys - Requirements for metal chimneys - Part 2
Metal liners and connecting flue pipes
EN 1857:2010 as implemented nationally by MSA
EN 1857:2010
Chimneys - Components - Concrete flue liners
EN 1858:2008 as implemented nationally by MSA
EN 1858:2009
Chimneys - Components - Concrete flue blocks
EN 1863-2:2004 as implemented nationally by MSA
EN 1863-2:2004
Glass in building - Heat strengthened soda lime
silicate
glass
-
Part
2
Evaluation
of
conformity/Product standard
EN 1873:2005 as implemented nationally by MSA
EN 1873:2006
Prefabricated accessories for roofing - Individual roof
lights of plastics - Product specification and test
methods
EN 1916:2002 as implemented nationally by MSA
EN 1916:2002
Concrete pipes and fittings, unreinforced, steel fibre
and reinforced
B
EN 1916:2002/AC:2008 as implemented nationally
by MSA EN 1916:2002/AC:2008
Concrete pipes and fittings, unreinforced, steel fibre
and reinforced
EN 1917:2002 as implemented nationally by MSA
EN 1917:2002
Concrete manholes and inspection chambers,
unreinforced, steel fibre and reinforced
EN 1917:2002/AC:2008 as implemented nationally
by MSA EN 1917:2002/AC:2008
Concrete manholes and inspection chambers,
unreinforced, steel fibre and reinforced
EN 1935:2002 as implemented nationally by MSA
EN 1935:2002
Building hardware-Single-axis hinges-Requirements
and test methods
EN 1935:2002/AC:2003 as implemented nationally
by MSA EN 1935:2002/AC:2004
Building hardware-Single-axis hinges-Requirements
and test methods
EN 10025-1:2004 as implemented nationally by
MSA EN 10025-1:2004
Hot rolled products of structural steels - Part 1
General technical delivery conditions
EN 10088-4:2009 as implemented nationally by
MSA EN 10088-4:2009
Stainless steels - Part 4: Technical delivery conditions
for sheet/plate and strip of corrosion resisting steels
for construction purposes
EN 10088-5:2009 as implemented nationally by
MSA EN 10088-5:2009
Stainless steels - Part 5: Technical delivery conditions
for bars, rods, wire, sections and bright products of
corrosion resisting steels for construction purposes
EN 10210-1:2006 as implemented nationally by
MSA EN 10210-1:2006
Hot finished structural hollow sections of non-alloy
and fine grain steels - Part 1: Technical delivery
conditions
EN 10219-1:2006 as implemented nationally by
MSA EN 10219-1:2006
Cold formed welded structural hollow sections of non-
alloy and fine grain steels - Part 1: Technical delivery
conditions
EN 10224:2002 as implemented nationally by MSA
EN 10224:2003
Non-alloy steel tubes and fittings for the conveyance
of aqueous liquids including water for human
consumption - Technical delivery conditions
EN 10224:2002/A1:2005 as implemented nationally
by MSA EN 10224:2003/A1:2005
Non-alloy steel tubes and fittings for the conveyance
of aqueous liquids including water for human
consumption - Technical delivery conditions
EN
10255:2004+A1:2007
as
implemented
nationally by MSA EN 10255:2004+A1:2007
Non-Alloy steel tubes suitable for welding and
threading - Technical delivery conditions
EN 10311:2005 as implemented nationally by MSA
EN 10311:2005
Joints for the connection of steel tubes and fittings for
the conveyance of water and other aqueous liquids
EN 10312:2002 as implemented nationally by MSA
EN 10312:2003
Welded stainless steel tubes for the conveyance of
aqueous liquids including water for human
consumption - Technical delivery conditions
EN 10312:2002/A1:2005 as implemented nationally
by MSA EN 10312:2003/A1:2005
Welded stainless steel tubes for the conveyance of
aqueous liquids including water for human
consumption - Technical delivery conditions
EN 10340:2007 as implemented nationally by MSA
EN 10340:2007
Steel casting for structural uses
EN 10340:2007/AC:2008 as implemented nationally
by MSA EN 10340:2007/AC:2008
Steel casting for structural uses
B
EN 10343:2009 as implemented nationally by MSA
EN 10343:2009
Steels for quenching and tempering for construction
purposes - Technical delivery conditions
EN 12004:2007 as implemented nationally by MSA
EN 12004:2007
Adhesives for tiles - Requirements, evaluation of
conformity, classification and designation
EN 12050-1:2001 as implemented nationally by
MSA EN 12050-1:2001
Wastewater lifting plants for buildings and sites-
Principles of construction and testing-Part 1: Lifting
plants for wastewater containing faecal matter
EN 12050-2:2000 as implemented nationally by
MSA EN 12050-2:2001
Wastewater lifting plants for buildings and sites-
Principles of construction and testing-Part 2: Lifting
plants for faecal-free wastewater
EN 12050-3:2000 as implemented nationally by
MSA EN 12050-3:2001
Wastewater lifting plants for buildings and sites-
Principles of construction and testing-Part 3: Lifting
plants for wastewater containing faecal matter for
limited applications
EN 12050-4:2000 as implemented nationally by
MSA EN 12050-4:2000
Wastewater lifting plants for buildings and sites-
Principles of construction and testing-Part 4: Non-
return valves for faecal-free wastewater and
wastewater containing faecal matter
EN 12057:2004 as implemented nationally by MSA
EN 12057:2004
Natural stone products - Modular tiles – Requirements
EN 12058:2004 as implemented nationally by MSA
EN 12058:2004
Natural stone products - Slabs for floors and stairs -
Requirements
EN 12094-1:2003 as implemented nationally by
MSA EN 12094-1:2003
Fixed firefighting systems – Components for gas
extinguishing systems – Part 1: Requirements and test
methods for electrical automatic control and delay
devices
EN 12094-2:2003 as implemented nationally by
MSA EN 12094-2:2003
Fixed firefighting systems – Components for gas
extinguishing systems – Part 2: Requirements and test
methods for non-electrical automatic control and delay
devices
EN 12094-3:2003 as implemented nationally by
MSA EN 12094-3:2003
Fixed firefighting systems – Components for gas
extinguishing systems – Part 3: Requirements and test
methods for manual triggering and stop devices
EN 12094-4:2004 as implemented nationally by
MSA EN 12094-4:2004
Fixed firefighting systems - Components for gas
extinguishing systems - Part 4: Requirements and test
methods for container valve assemblies and their
actuators
EN 12094-5:2006 as implemented nationally by
MSA EN 12094-5:2006
Fixed firefighting systems - Components for gas
extinguishing systems - Part 5: Requirements and test
methods for high and low pressure selector valves and
their actuators for CO2 systems
EN 12094-6:2006 as implemented nationally by
MSA EN 12094-6:2006
Fixed firefighting systems - Components for gas
extinguishing systems - Part 6: Requirements and test
methods for non-electrical disable devices for CO2
systems
EN 12094-7:2000 as implemented nationally by
MSA EN 12094-7:2001
Fixed firefighting systems - Components for gas
extinguishing systems - Part 7: Requirements and test
methods for nozzles for CO2 systems
EN
12094-7:2000/A1:2005
as
implemented
nationally by MSA EN 12094-7:2001/A1:2005
Fixed firefighting systems - Components for gas
extinguishing systems - Part 7: Requirements and test
methods for nozzles for CO2 systems
EN 12094-8:2006 as implemented nationally by
MSA EN 12094-8:2006
Fixed firefighting systems - Components for gas
extinguishing systems - Part 8: Requirements and test
methods for connectors
EN 12094-9:2003 as implemented nationally by
MSA EN 12094-9:2003
Fixed firefighting systems – Components for gas
extinguishing systems – Part 9: Requirements and test
methods for special fire detectors
B
EN 12094-10:2003 as implemented nationally by
MSA EN 12094-10:2003
Fixed firefighting systems – Components for gas
extinguishing systems – Part 10: Requirements and
test methods for pressure gauges and pressure switches
EN 12094-11:2003 as implemented nationally by
MSA EN 12094-11:2003
Fixed firefighting systems – Components for gas
extinguishing systems – Part 11: Requirements and
test methods for mechanical weighing devices
EN 12094-12:2003 as implemented nationally by
MSA EN 12094-12:2003
Fixed firefighting systems – Components for gas
extinguishing systems – Part 12: Requirements and
test methods for pneumatic alarm devices
EN 12094-13:2001 as implemented nationally by
MSA EN 12094-13:2001
Fixed firefighting systems - Components for gas
extinguishing systems - Part 13: Requirements and test
methods for check valves and non-return valves
EN 12094-13:2001/AC:2002 as implemented
nationally by MSA EN 12094-13:2001/AC:2002
Fixed firefighting systems - Components for gas
extinguishing systems - Part 13: Requirements and test
methods for check valves and non-return valves
EN 12101-1:2005 as implemented nationally by
MSA EN 12101-1:2005
Smoke and heat control systems - Part 1: Specification
for smoke barriers
EN
12101-1:2005/A1:2006
as
implemented
nationally by MSA EN 12101-1:2005/A1:2006
Smoke and heat control systems - Part 1: Specification
for smoke barriers
EN 12101-2:2003 as implemented nationally by
MSA EN 12101-2:2003
Smoke and heat control systems - Part 2: Specification
for natural smoke and heat exhaust ventilators
EN 12101-3:2002 as implemented nationally by
MSA EN 12101-3:2002
Smoke and heat control systems - Part 3: Specification
for powered smoke and heat exhaust ventilators
EN
12101-3:2002/AC:2005 as
implemented
nationally by MSA EN 12101-3:2002/AC:2005
Smoke and heat control systems - Part 3: Specification
for powered smoke and heat exhaust ventilators
EN 12101-6:2005 as implemented nationally by
MSA EN 12101-6:2005
Smoke and heat control systems - Part 6: Specification
for pressure differential systems – Kits
EN
12101-6:2005/AC:2006 as
implemented
nationally by MSA EN 12101-6:2005/AC:2006
Smoke and heat control systems - Part 6: Specification
for pressure differential systems – Kits
EN 12101-10:2005 as implemented nationally by
MSA EN 12101-10:2005
Smoke and heat control systems - Part 10: Power
supplies
EN 12101-10:2005/AC:2007 as implemented
nationally by MSA EN 12101-10:2005/AC:2007
Smoke and heat control systems - Part 10: Power
supplies
EN 12150-2:2004 as implemented nationally by
MSA EN 12150-2:2004
Glass in building - Thermally toughened soda lime
silicate safety glass - Part 2: Evaluation of
conformity/Product standard
EN 12209:2003 as implemented nationally by MSA
EN 12209:2004
Building hardware – Locks and latches –
Mechanically operated locks, latches and locking
plates – Requirements and test methods
EN 12209:2003/AC:2005 as implemented nationally
by MSA EN 12209:2004/AC:2006
Building hardware – Locks and latches –
Mechanically operated locks, latches and locking
plates – Requirements and test methods
EN 12259-1:1999+A1:2001 as implemented
nationally by MSA EN 12259-1:2000+A1:2001
Fixed firefighting systems – Components for sprinkler
and water spray systems – Part 1: Sprinklers
B
EN
12259-1:1999+A1:2001/A2:2004
as
implemented nationally by MSA EN 12259-
1:2000+A1:2001/A2:2004
Fixed firefighting systems – Components for sprinkler
and water spray systems – Part 1: Sprinklers
EN
12259-1:1999+A1:2001/A3:2006
as
implemented nationally by MSA EN 12259-
1:2000+A1:2001/A3:2006
Fixed firefighting systems – Components for sprinkler
and water spray systems – Part 1: Sprinklers
EN 12259-2:1999 as implemented nationally by
MSA EN 12259-2:2000
Fixed firefighting systems – Components for sprinkler
and water spray systems – Part 2: Wet alarm valve
assemblies
EN
12259-2:1999/A1:2001
as
implemented
nationally by MSA EN 12259-2:2000/A1:2001
Fixed firefighting systems – Components for sprinkler
and water spray systems – Part 2: Wet alarm valve
assemblies
EN
12259-2:1999/A2:2005
as
implemented
nationally by MSA EN 12259-2:2000/A2:2005
Fixed firefighting systems – Components for sprinkler
and water spray systems – Part 2: Wet alarm valve
assemblies
EN 12259-2:1999/AC:2002 as implemented
nationally by MSA EN 12259-2:2000/AC:2002
Fixed firefighting systems – Components for sprinkler
and water spray systems – Part 2: Wet alarm valve
assemblies
EN 12259-3:2000 as implemented nationally by
MSA EN 12259-3:2000
Fixed firefighting systems - Components for automatic
sprinkler and water spray systems - Part 3: Dry alarm
valve assemblies
EN
12259-3:2000/A1:2001
as
implemented
nationally by MSA EN 12259-3:2000/A1:2001
Fixed firefighting systems - Components for automatic
sprinkler and water spray systems - Part 3: Dry alarm
valve assemblies
EN
12259-3:2000/A2:2005
as
implemented
nationally by MSA EN 12259-3:2000/A2:2005
Fixed firefighting systems - Components for automatic
sprinkler and water spray systems - Part 3: Dry alarm
valve assemblies
EN 12259-4:2000 as implemented nationally by
MSA EN 12259-4:2000
Fixed firefighting systems - Components for sprinkler
and water spray systems - Part 4: Water motor alarms
EN
12259-4:2000/A1:2001
as
implemented
nationally by MSA EN 12259-4:2000/A1:2001
Fixed firefighting systems - Components for sprinkler
and water spray systems - Part 4: Water motor alarms
EN 12259-5:2002 as implemented nationally by
MSA EN 12259-5:2002
Fixed firefighting systems – Components for sprinkler
and water spray systems – Part 5: Water flow detectors
EN 12271:2006 as implemented nationally by MSA
EN 12271:2007
Surface dressing – Requirements
EN 12273:2008 as implemented nationally by MSA
EN 12273:2008
Slurry surfacing – Requirements
EN 12285-2:2005 as implemented nationally by
MSA EN 12285-2:2005
Workshop fabricated steel tanks - Part 2: Horizontal
cylindrical single skin and double skin tanks for the
aboveground storage of flammable and non-flammable
water polluting liquids
EN 12326-1:2004 as implemented nationally by
MSA EN 12326-1:2004
Slate and stone products for discontinuous roofing and
cladding - Part 1: Product specification
EN 12337-2:2004 as implemented nationally by
MSA EN 12337-2:2004
Glass in building - Chemically strengthened soda lime
silicate
glass
-
Part
2
Evaluation
of
conformity/Product standard
EN 12352:2006 as implemented nationally by MSA
EN 12352:2006
Traffic control equipment - Warning and safety light
devices
B
EN 12368:2006 as implemented nationally by MSA
EN 12368:2006
Traffic control equipment - Signal heads
EN 12380:2002 as implemented nationally by MSA
EN 12380:2003
Air admittance valves for drainage systems -
Requirements, tests methods and evaluation of
conformity
EN 12446:2003 as implemented nationally by MSA
EN 12446:2003
Chimneys - Components - Concrete outer wall
elements
EN 12467:2004 as implemented nationally by MSA
EN 12467:2005
Fibre-cement flat sheets - Product specification and
test methods
EN 12467:2004/A1:2005 as implemented nationally
by MSA EN 12467:2005/A1:2005
Fibre-cement flat sheets - Product specification and
test methods
EN 12467:2004/A2:2006 as implemented nationally
by MSA EN 12467:2005/A2:2006
Fibre-cement flat sheets - Product specification and
test methods
EN 12566-1:2000 as implemented nationally by
MSA EN 12566-1:2000
Small wastewater treatment systems for up to 50 PT –
Part 1: Prefabricated septic tanks
EN
12566-1:2000/A1:2003
as
implemented
nationally by MSA EN 12566-1:2000/A1:2004
Small wastewater treatment systems for up to 50 PT –
Part 1: Prefabricated septic tanks
EN 12566-3:2005+A1:2009 as implemented
nationally by MSA EN 12566-3:2005+A1:2009
Small wastewater treatment systems for up to 50 PT -
Part 3: Packaged and/or site assembled domestic
wastewater treatment plants
EN 12566-4:2007 as implemented nationally by
MSA EN 12566-4:2007
Small wastewater treatment systems for up to 50 PT -
Part 4: Septic tanks assembled in situ from
prefabricated kits
EN 12591:2009 as implemented nationally by MSA
EN 12591:2009
Bitumen and bituminous binders - Specifications for
paving grade bitumen
EN 12620:2002+A1:2008 as implemented nationally
by MSA EN 12620:2002+A1:2008
Aggregates for concrete
EN 12676-1:2000 as implemented nationally by
MSA EN 12676-1:2000
Anti-glare systems for roads – Part 1: Performance
and characteristics
EN
12676-1:2000/A1:2003
as
implemented
nationally by MSA EN 12676-1:2000/A1:2003
Anti-glare systems for roads – Part 1: Performance
and characteristics
EN 12737:2004+A1:2007 as implemented nationally
by MSA EN 12737:2004+A1:2007
Precast concrete products - Floor slats for livestock
EN 12764:2004+A1:2008 as implemented nationally
by MSA EN 12764:2005+A1:2008
Sanitary appliances - Specification for whirlpool baths
EN 12794:2005+A1:2007 as implemented nationally
by MSA EN 12794:2005+A1:2007
Precast concrete products - Foundation piles
EN 12794:2005+A1:2007/AC:2008 as implemented
nationally
by
MSA
EN
12794:2005+A1:2007/AC:2008
Precast concrete products - Foundation piles
B
EN 12809:2001as implemented nationally by MSA
EN 12809:2001
Residential independent boilers fired by solid fuel –
Nominal heat output up to 50 kW – Requirements and
test methods
EN 12809:2001/A1:2004 as implemented nationally
by MSA EN 12809:2001/A1:2004
Residential independent boilers fired by solid fuel –
Nominal heat output up to 50 kW – Requirements and
test methods
EN 12809:2001/AC:2006 as implemented nationally
by MSA EN 12809:2001/AC:2006
Residential independent boilers fired by solid fuel –
Nominal heat output up to 50 kW – Requirements and
test methods
EN 12809:2001/A1:2004/AC:2007 as implemented
nationally
by
MSA
EN
12809:2001/A1:2004/AC:2007
Residential independent boilers fired by solid fuel –
Nominal heat output up to 50 kW – Requirements and
test methods
EN 12815:2001 as implemented nationally by MSA
EN 12815:2001
Residential cookers fired by solid fuel – Requirements
and test methods
EN 12815:2001/A1:2004 as implemented nationally
by MSA EN 12815:2001/A1:2004
Residential cookers fired by solid fuel – Requirements
and test methods
EN 12815:2001/AC:2006 as implemented nationally
by MSA EN 12815:2001/AC:2006
Residential cookers fired by solid fuel – Requirements
and test methods
EN 12815:2001/A1:2004/AC:2007 as implemented
nationally
by
MSA
EN
12815:2001/A1:2004/AC:2007
Residential cookers fired by solid fuel – Requirements
and test methods
EN 12839:2001 as implemented nationally by MSA
EN 12839:2001
Precast concrete products - Elements for fences
EN 12843:2004 as implemented nationally by MSA
EN 12843:2004
Precast concrete products - Masts and poles
EN 12859:2008 as implemented nationally by MSA
EN 12859:2008
Gypsum blocks - Definitions, requirements and test
methods
EN 12860:2001 as implemented nationally by MSA
EN 12860:2001
Gypsum based adhesives for gypsum blocks -
Definitions, requirements and test methods
EN 12860:2001/AC:2002 as implemented nationally
by MSA EN 12860:2001/AC:2002
Gypsum based adhesives for gypsum blocks -
Definitions, requirements and test methods
EN 12878:2005 as implemented nationally by MSA
EN 12878:2005
Pigments for the colouring of building materials based
on cement and/or lime - Specifications and methods of
test
EN 12878:2005/AC:2006 as implemented nationally
by MSA EN 12878:2005/AC:2006
Pigments for the colouring of building materials based
on cement and/or lime - Specifications and methods of
test
EN 12899-1:2007 as implemented nationally by
MSA EN 12899-1:2007
Fixed, vertical road traffic signs - Part 1: Fixed signs
EN 12899-2:2007 as implemented nationally by
MSA EN 12899-2:2007
Fixed, vertical road traffic signs - Part 2
Transilluminated traffic bollards (TTB)
EN 12899-3:2007 as implemented nationally by
MSA EN 12899-3:2007
Fixed, vertical road traffic signs - Part 3: Delineator
posts and retroreflectors
B
EN 12951:2004 as implemented nationally by MSA
EN 12951:2004
Prefabricated accessories for roofing - Permanently
fixed roof ladders - Product specification and test
methods
EN 12966-1:2005+A1:2009 as implemented
nationally by MSA EN 12966-1:2005+A1:2009
Road vertical signs - Variable message traffic signs -
Part 1: Product standard
EN 13024-2:2004 as implemented nationally by
MSA EN 13024-2:2004
Glass in building - Thermally toughened borosilicate
safety glass - Part 2: Evaluation of conformity/Product
standard
EN 13043:2002 as implemented nationally by MSA
EN 13043:2002
Aggregates for bituminous mixtures and surface
treatments for roads, airfields and other trafficked
areas
EN 13043:2002/AC:2004 as implemented nationally
by MSA EN 13043:2002/AC:2004
Aggregates for bituminous mixtures and surface
treatments for roads, airfields and other trafficked
areas
EN 13055-1:2002 as implemented nationally by
MSA EN 13055-1:2002
Lightweight aggregates - Part 1: Lightweight
aggregates for concrete, mortar and grout
EN
13055-1:2002/AC:2004 as
implemented
nationally by MSA EN 13055-1:2002/AC:2004
Lightweight aggregates - Part 1: Lightweight
aggregates for concrete, mortar and grout
EN 13055-2:2004 as implemented nationally by
MSA EN 13055-2:2004
Lightweight aggregates – Part 2: Lightweight
aggregates for bituminous mixtures and surface
treatments and for unbound and bound applications
EN 13063-1:2005+A1:2007 as implemented
nationally by MSA EN 13063-1:2006+A1:2007
Chimneys - System chimneys with clay/ceramic flue
liners - Part 1: Requirements and test methods for
sootfire resistance
EN 13063-2:2005+A1:2007 as implemented
nationally by MSA EN 13063-2:2005+A1:2007
Chimneys - System chimneys with clay/ceramic flue
liners - Part 2: Requirements and test methods under
wet conditions
EN 13063-3:2007 as implemented nationally by
MSA EN 13063-3:2007
Chimneys - System chimneys with clay/ceramic flue
liners - Part 3: Requirements and test methods for air
flue system chimneys
EN 13069:2005 as implemented nationally by MSA
EN 13069:2005
Chimneys - Clay/ceramic outer walls for system
chimneys - Requirements and test methods
EN 13084-5:2005 as implemented nationally by
MSA EN 13084-5:2005
Free-standing chimneys - Part 5: Material for brick
liners - Product specifications
EN
13084-5:2005/AC:2006 as
implemented
nationally by MSA EN 13084-5:2005/AC:2006
Free-standing chimneys - Part 5: Material for brick
liners - Product specifications
EN 13084-7:2005 as implemented nationally by
MSA EN 13084-7:2005
Free-standing chimneys - Part 7: Product
specifications of cylindrical steel fabrications for use
in single wall steel chimneys and steel liners
EN
13084-7:2005/AC:2009 as
implemented
nationally by MSA EN 13084-7:2005/AC:2009
Free-standing chimneys - Part 7: Product
specifications of cylindrical steel fabrications for use
in single wall steel chimneys and steel liners
EN 13101:2002 as implemented nationally by MSA
EN 13101:2002
Steps for underground man entry chambers -
Requirements, marking, testing and evaluation of
conformity
EN 13108-1:2006 as implemented nationally by
MSA EN 13108-1:2006
Bituminous mixtures - Material specifications - Part 1
Asphalt Concrete
B
EN
13108-1:2006/AC:2008 as
implemented
nationally by MSA EN 13108-1:2006/AC:2008
Bituminous mixtures - Material specifications - Part 1
Asphalt Concrete
EN 13108-2:2006 as implemented nationally by
MSA EN 13108-2:2006
Bituminous mixtures - Material specifications - Part 2
Asphalt Concrete for very thin layers
EN
13108-2:2006/AC:2008 as
implemented
nationally by MSA EN 13108-2:2006/AC:2008
Bituminous mixtures - Material specifications - Part 2
Asphalt Concrete for very thin layers
EN 13108-3:2006 as implemented nationally by
MSA EN 13108-3:2006
Bituminous mixtures - Material specifications - Part 3
Soft Asphalt
EN 13108-3:2006/AC:2008 as implemented
nationally by MSA EN 13108-3:2006/AC:2008
Bituminous mixtures - Material specifications - Part 3
Soft Asphalt
EN 13108-4:2006 as implemented nationally by
MSA EN 13108-4:2006
Bituminous mixtures - Material specifications - Part 4
Hot Rolled Asphalt
EN 13108-4:2006/AC:2008 as implemented
nationally by MSA EN 13108-4:2006/AC:2008
Bituminous mixtures - Material specifications - Part 4
Hot Rolled Asphalt
EN 13108-5:2006 as implemented nationally by
MSA EN 13108-5:2006
Bituminous mixtures - Material specifications - Part 5
Stone Mastic Asphalt
EN 13108-5:2006/AC:2008 as implemented
nationally by MSA EN 13108-5:2006/AC:2008
Bituminous mixtures - Material specifications - Part 5
Stone Mastic Asphalt
EN 13108-6:2006 as implemented nationally by
MSA EN 13108-6:2006
Bituminous mixtures - Material specifications - Part 6
Mastic Asphalt
EN 13108-6:2006/AC:2008 as implemented
nationally by MSA EN 13108-6:2006/AC:2008
Bituminous mixtures - Material specifications - Part 6
Mastic Asphalt
EN 13108-7:2006 as implemented nationally by
MSA EN 13108-7:2006
Bituminous mixtures - Material specifications - Part 7
Porous Asphalt
EN 13108-7:2006/AC:2008 as implemented
nationally by MSA EN 13108-7:2006/AC:2008
Bituminous mixtures - Material specifications - Part 7
Porous Asphalt
EN 13139:2002 as implemented nationally by MSA
EN 13139:2002
Aggregates for mortar
EN 13139:2002/AC:2004 as implemented nationally
by MSA EN 13139:2002/AC:2004
Aggregates for mortar
EN 13160-1:2003 as implemented nationally by
MSA EN 13160-1:2003
Leak detection systems - Part 1: General principles
EN 13162:2008 as implemented nationally by MSA
EN 13162:2008
Thermal insulation products for buildings - Factory
made mineral wool (MW) products - Specification
EN 13163:2008 as implemented nationally by MSA
EN 13163:2008
Thermal insulation products for buildings - Factory
made products of expanded polystyrene (EPS) -
Specification
B
EN 13164:2008 as implemented nationally by MSA
13164:2008
Thermal insulation products for buildings - Factory
made products of extruded polystyrene foam (XPS) –
Specification
EN 13165:2008 as implemented nationally by MSA
EN 13165:2008
Thermal insulation products for buildings - Factory
made rigid polyurethane foam (PUR) products -
Specification
EN 13166:2008 as implemented nationally by MSA
EN 13166:2008
Thermal insulation products for buildings - Factory
made products of phenolic foam (PF) - Specification
EN 13167:2008 as implemented nationally by MSA
EN 13167:2008
Thermal insulation products for buildings - Factory
made products of phenolic foam (PF) – Specification
EN 13168:2008 as implemented nationally by MSA
EN 13168:2008
Thermal insulation products for buildings - Factory
made wood wool (WW) products - Specification
EN 13169:2008 as implemented nationally by MSA
EN 13169:2008
Thermal insulation products for buildings - Factory
made products of expanded perlite (EPB) –
Specification
EN 13170:2008 as implemented nationally by MSA
EN 13170:2008
Thermal insulation products for buildings-Factory
made products of expanded cork (ICB)-Specification
EN 13171:2008 as implemented nationally by MSA
EN 13171:2008
Thermal insulation products for buildings - Factory
made wood fibre (WF) products – Specification
EN
13224:2004+A1:2007
as
implemented
nationally by MSA EN 13224:2004+A1:2007
Precast concrete products – Ribbed floor elements
EN 13225:2004 as implemented nationally by MSA
EN 13225:2004
Precast concrete products - Linear structural elements
EN 13225:2004/AC:2006 as implemented nationally
by MSA EN 13225:2004/AC:2007
Precast concrete products - Linear structural elements
EN 13229:2001 as implemented nationally by MSA
EN 13229:2001
Inset appliances including open fires fired by solid
fuels – Requirements and test methods
EN 13229:2001/A1:2003 as implemented nationally
by MSA EN 13229:2001/A1:2003
Inset appliances including open fires fired by solid
fuels – Requirements and test methods
EN 13229:2001/A2:2004 as implemented nationally
by MSA EN 13229:2001/A2:2004
Inset appliances including open fires fired by solid
fuels – Requirements and test methods
EN 13229:2001/AC:2006 as implemented nationally
by MSA EN 13229:2001/AC:2006
Inset appliances including open fires fired by solid
fuels – Requirements and test methods
EN 13229:2001/A2:2004/AC:2007 as implemented
nationally
by
MSA
EN
13229:2001/A2:2004/AC:2007
Inset appliances including open fires fired by solid
fuels – Requirements and test methods
EN 13240:2001as implemented nationally by MSA
EN 13240:2001
Room heaters fired by solid fuel – Requirement and
test methods
EN 13240:2001/A2:2004 as implemented nationally
by MSA EN 13240:2001/A2:2004
Room heaters fired by solid fuel – Requirement and
test methods
B
EN 13240:2001/AC:2006 as implemented nationally
by MSA EN 13240:2001/AC:2006
Room heaters fired by solid fuel – Requirement and
test methods
EN 13240:2001/A2:2004/AC:2007 as implemented
nationally
by
MSA
EN
13240:2001/A2:2004/AC:2007
Room heaters fired by solid fuel – Requirement and
test methods
EN 13241-1:2003 as implemented nationally by
MSA EN 13241-1:2003
Industrial, commercial and garage doors and gates -
Product standard - Part 1: Products without fire
resistance or smoke control characteristics
EN
13242:2002+A1:2007
as
implemented
nationally by MSA EN 13242:2003+A1:2007
Aggregates for unbound and hydraulically bound
materials for use in civil engineering work and road
construction
EN 13245-2:2008 as implemented nationally by
MSA EN 13245-2:2008
Plastics - Unplasticized poly(vinyl chloride) (PVC-U)
profiles for building applications - Part 2: PVC-U
profiles and PVC-UE profiles for internal and external
wall and ceiling finishes
EN 13245-2:2008/AC:2009 as implemented
nationally by MSA EN 13245-2:2008/AC:2009
Plastics - Unplasticized poly(vinyl chloride) (PVC-U)
profiles for building applications - Part 2: PVC-U
profiles and PVC-UE profiles for internal and external
wall and ceiling finishes
EN 13249:2000 as implemented nationally by MSA
EN 13249:2000
Geotextiles and geotextile-related products -
Characteristics required for use in the construction of
roads and other trafficked areas (excluding railways
and asphalt inclusion)
EN 13249:2000/A1:2005 as implemented nationally
by MSA EN 13249:2000/A1:2005
Geotextiles and geotextile-related products -
Characteristics required for use in the construction of
roads and other trafficked areas (excluding railways
and asphalt inclusion)
EN 13250:2000 as implemented nationally by MSA
EN 13250:2000
Required characteristics for geotextiles and geotextile-
related products used in the construction of railways
EN 13250:2000/A1:2005 as implemented nationally
by MSA EN 13250:2000/A1:2005
Required characteristics for geotextiles and geotextile-
related products used in the construction of railways
EN 13251:2000 as implemented nationally by MSA
EN 13251:2000
Geotextiles
and
geotextile-related
products-
Characteristics required for use in earthworks,
foundations and retaining structures
EN 13251:2000/A1:2005 as implemented nationally
by MSA EN 13251:2000/A1:2005
Geotextiles
and
geotextile-related
products-
Characteristics required for use in earthworks,
foundations and retaining structures
EN 13252:2000 as implemented nationally by MSA
EN 13252:2000
Geotextiles
and
geotextile-related
products-
Characteristics required for use in drainage systems
EN 13252:2000/A1:2005 as implemented nationally
by MSA EN 13252:2000/A1:2005
Geotextiles
and
geotextile-related
products-
Characteristics required for use in drainage systems
EN 13253:2000 as implemented nationally by MSA
EN 13253:2000
Geotextiles and geotextile-related products -
Characteristics required for use in erosion control
works (coastal protection, bank revetments)
EN 13253:2000/A1:2005 as implemented nationally
by MSA EN 13253:2000/A1:2005
Geotextiles and geotextile-related products -
Characteristics required for use in erosion control
works (coastal protection, bank revetments)
EN 13254:2000 as implemented nationally by MSA
EN 13254:2000
Geotextiles and geotextile related products-
Characteristics required for use in the construction of
reservoirs and dams
EN 13254:2000/A1:2005 as implemented nationally
by MSA EN 13254:2000/A1:2005
Geotextiles and geotextile related products-
Characteristics required for use in the construction of
reservoirs and dams
B
EN 13254:2000/AC:2003 as implemented nationally
by MSA EN 13254:2000/AC:2003
Geotextiles and geotextile related products-
Characteristics required for use in the construction of
reservoirs and dams
EN 13255:2000 as implemented nationally by MSA
EN 13255:2000
Geotextiles
and
geotextile-related
products-
Characteristics required for use in the construction of
canals
EN 13255:2000/A1:2005 as implemented nationally
by MSA EN 13255:2000/A1:2005
Geotextiles
and
geotextile-related
products-
Characteristics required for use in the construction of
canals
EN 13255:2000/AC:2003 as implemented nationally
by MSA EN 13255:2000/AC:2003
Geotextiles
and
geotextile-related
products-
Characteristics required for use in the construction of
canals
EN 13256:2000 as implemented nationally by MSA
EN 13256:2001
Geotextiles
and
geotextile-related
products-
Characteristics required for use in the construction of
tunnels and underground structures
EN 13256:2000/A1:2005 as implemented nationally
by MSA EN 13256:2001/A1:2005
Geotextiles
and
geotextile-related
products-
Characteristics required for use in the construction of
tunnels and underground structures
EN 13256:2000/AC:2003 as implemented nationally
by MSA EN 13256:2001/AC:2003
Geotextiles
and
geotextile-related
products-
Characteristics required for use in the construction of
tunnels and underground structures
EN 13257:2000 as implemented nationally by MSA
EN 13257:2001
Geotextiles and geotextile-related products -
Characteristics required for use in solid waste
disposals
EN 13257:2000/A1:2005 as implemented nationally
by MSA EN 13257:2001/A1:2005
Geotextiles and geotextile-related products -
Characteristics required for use in solid waste
disposals
EN 13257:2000/AC:2003 as implemented nationally
by MSA EN 13257:2001/AC:2003
Geotextiles and geotextile-related products -
Characteristics required for use in solid waste
disposals
EN 13263-1:2005+A1:2009 as implemented
nationally by MSA EN 13263-1:2005+A1:2009
Silica fume for concrete - Part 1: Definitions,
requirements and conformity criteria
EN 13265:2000 as implemented nationally by MSA
EN 13265:2001
Geotextiles and geotextile-related products -
Characteristics required for use in liquid waste
containment projects
EN 13265:2000/A1:2005 as implemented nationally
by MSA EN 13265:2001/A1:2005
Geotextiles and geotextile-related products -
Characteristics required for use in liquid waste
containment projects
EN 13265:2000/AC:2003 as implemented nationally
by MSA EN 13265:2001/AC:2003
Geotextiles and geotextile-related products -
Characteristics required for use in liquid waste
containment projects
EN 13279-1:2008 as implemented nationally by
MSA EN 13279-1:2008
Gypsum binders and gypsum plasters - Part 1
Definitions and requirements
EN 13310:2003 as implemented nationally by MSA
EN 13310:2003
Kitchen sinks - Functional requirements and test
methods
EN 13341:2005 as implemented nationally by MSA
EN 13341:2005
Thermoplastics static tanks for above ground storage
of domestic heating oils, kerosene and diesel fuels -
Blow moulded polyethylene, rotationally moulded
polyethylene and polyamide 6 by anionic
polymerization tanks - Requirements and test methods
EN 13361:2004 as implemented nationally by MSA
EN 13361:2004
Geosynthetic barriers - Characteristics required for use
in the construction of reservoirs and dams
B
EN 13361:2004/A1:2006 as implemented nationally
by MSA EN 13361:2004/A1:2006
Geosynthetic barriers - Characteristics required for use
in the construction of reservoirs and dams
EN 13362:2005 as implemented nationally by MSA
EN 13362:2005
Geosynthetic Barriers - Characteristics required for
use in the construction of canals
EN 13383-1:2002 as implemented nationally by
MSA EN 13383-1:2002
Armourstone - Part 1: Specification
EN
13383-1:2002/AC:2004 as
implemented
nationally by MSA EN 13383-1:2002/AC:2004
Armourstone - Part 1: Specification
EN 13407:2006 as implemented nationally by MSA
EN 13407:2006
Wall-hung urinals - Functional requirements and test
methods
EN 13450:2002 as implemented nationally by MSA
EN 13450:2003
Aggregates for railway ballast
EN 13450:2002/AC:2004 as implemented nationally
by MSA EN 13450:2003/AC:2004
Aggregates for railway ballast
EN 13454-1:2004 as implemented nationally by
MSA EN 13454-1:2004
Binders, composite binders and factory made mixtures
for floor screeds based on calcium sulfate - Part 1
Definitions and requirements
EN 13479:2004 as implemented nationally by MSA
EN 13479:2005
Welding consumables - General product standard for
filler metals and fluxes for fusion welding of metallic
materials
EN 13491:2004 as implemented nationally by MSA
EN 13491:2004
Geosynthetic barriers - Characteristics required for use
as a fluid barrier in the construction of tunnels and
underground structures
EN 13491:2004/A1:2006 as implemented nationally
by MSA EN 13491:2004/A1:2006
Geosynthetic barriers - Characteristics required for use
as a fluid barrier in the construction of tunnels and
underground structures
EN 13492:2004 as implemented nationally by MSA
EN 13492:2004
Geosynthetic barriers - Characteristics required for use
in the construction of liquid waste disposal sites,
transfer stations or secondary containment
EN 13492:2004/A1:2006 as implemented nationally
by MSA EN 13492:2004/A1:2006
Geosynthetic barriers - Characteristics required for use
in the construction of liquid waste disposal sites,
transfer stations or secondary containment
EN 13493:2005 as implemented nationally by MSA
EN 13493:2005
Geosynthetic barriers - Characteristics required for use
in the construction of solid waste storage and disposal
sites
EN 13502:2002 as implemented nationally by MSA
EN 13502:2002
Chimneys - Requirements and test methods for
clay/ceramic flue terminals
EN 13561:2004+A1:2008 as implemented nationally
by MSA EN 13561:2004+A1:2008
External blinds – Performance requirements including
safety
EN 13564-1:2002 as implemented nationally by
MSA EN 13564-1:2002
Anti-flooding devices for buildings - Part 1
Requirements
EN 13616:2004 as implemented nationally by MSA
EN 13616:2004
Overfill prevention devices for static tanks for liquid
petroleum fuels
B
EN 13616:2004/AC:2006 as implemented nationally
by MSA EN 13616:2004/AC:2006
Overfill prevention devices for static tanks for liquid
petroleum fuels
EN 13658-1:2005 as implemented nationally by
MSA EN 13658-1:2005
Metal lath and beads - Definitions, requirements and
test methods - Part 1: Internal plastering
EN 13658-2:2005 as implemented nationally by
MSA EN 13658-2:2005
Metal lath and beads - Definitions, requirements and
test methods - Part 2: External rendering
EN 13659:2004+A1:2008 as implemented nationally
by MSA EN 13659:2004+A1:2008
Shutters – Performance requirements including safety
EN
13693:2004+A1:2009
as
implemented
nationally by MSA EN 13693:2004+A1:2009
Precast concrete products - Special roof elements
EN
13707:2004+A2:2009
as
implemented
nationally by MSA EN 13707:2004+A2:2009
Flexible sheets for waterproofing - Reinforced
bitumen sheets for roof waterproofing - Definitions
and characteristics
EN 13747:2005+A2:2010 as implemented nationally
by MSA EN 13747:2005+A2:2010
Precast concrete products - Floor plates for floor
systems
EN 13748-1:2004 as implemented nationally by
MSA EN 13748-1:2004
Terrazzo tiles – Part 1: Terrazzo tiles for internal use
EN
13748-1:2004/A1:2005
as
implemented
nationally by MSA EN 13748-1:2004/A1:2005
Terrazzo tiles – Part 1: Terrazzo tiles for internal use
EN
13748-1:2004/AC:2005 as
implemented
nationally by MSA EN 13748-1:2004/AC:2005
Terrazzo tiles – Part 1: Terrazzo tiles for internal use
EN 13748-2:2004 as implemented nationally by
MSA EN 13748-2:2004
Screed materials and floor screeds – Screed material –
Properties and requirements
EN 13808:2005 as implemented nationally by MSA
EN 13808:2005
Bitumen and bituminous binders - Framework for
specifying cationic bituminous emulsions
EN 13813:2002 as implemented nationally by MSA
EN 13813:2002
Screed material and floor screeds - Screed material -
Properties and requirements
EN 13815:2006 as implemented nationally by MSA
EN 13815:2006
Fibrous gypsum plaster casts - Definitions,
requirements and test methods
EN 13830:2003 as implemented nationally by MSA
EN 13830:2003
Curtain walling – Product standard
EN 13859-1:2010 as implemented nationally by
MSA EN 13859-1:2010
Flexible sheets for waterproofing - Definitions and
characteristics of underlays - Part 1: Underlays for
discontinuous roofing
EN 13859-2:2010 as implemented nationally by
MSA EN 13859-2:2010
Flexible sheets for waterproofing - Definitions and
characteristics of underlays - Part 2: Underlays for
walls
EN 13877-3:2004 as implemented nationally by
MSA EN 13877-3:2005
Concrete pavements - Part 3: Specifications for dowels
to be used in concrete pavements
B
EN 13915:2007 as implemented nationally by MSA
EN 13915:2007
Prefabricated gypsum plasterboard panels with a
cellular paperboard core - Definitions, requirements
and test methods
EN 13924:2006 as implemented nationally by MSA
EN 13924:2006
Bitumen and bituminous binders - Specifications for
hard paving grade bitumens
EN 13924:2006/AC:2006 as implemented nationally
by MSA EN 13924:2006/AC:2006
Bitumen and bituminous binders - Specifications for
hard paving grade bitumens
EN 13950:2005 as implemented nationally by MSA
EN 13950:2005
Gypsum plasterboard thermal/acoustic insulation
composite panels - Definitions, requirements and test
methods
EN 13956:2005 as implemented nationally by MSA
EN 13956:2005
Flexible sheet for waterproofing - Plastic and rubber
sheets for roof waterproofing - Definitions and
characteristics
EN 13956:2005/AC:2006 as implemented nationally
by MSA EN 13956:2005/AC:2006
Flexible sheet for waterproofing - Plastic and rubber
sheets for roof waterproofing - Definitions and
characteristics
EN 13963:2005 as implemented nationally by MSA
EN 13963:2005
Jointing materials for gypsum plasterboards -
Definitions, requirements and test methods
EN 13963:2005/AC:2006 as implemented nationally
by MSA EN 13963:2005/AC:2006
Jointing materials for gypsum plasterboards -
Definitions, requirements and test methods
EN 13964:2004 as implemented nationally by MSA
EN 13964:2004
Suspended ceilings - Requirements and test methods
EN 13964:2004/A1:2006 as implemented nationally
by MSA EN 13964:2004/A1:2006
Suspended ceilings - Requirements and test methods
EN 13967:2004 as implemented nationally by MSA
EN 13967:2005
Flexible sheets for waterproofing - Plastic and rubber
damp proof sheets including plastic and rubber
basement tanking sheet - Definitions and
characteristics
EN 13967:2004/A1:2006 as implemented nationally
by MSA EN 13967:2005/A1:2006
Flexible sheets for waterproofing - Plastic and rubber
damp proof sheets including plastic and rubber
basement tanking sheet - Definitions and
characteristics
EN 13969:2004 as implemented nationally by MSA
EN 13969:2005
Flexible sheets for waterproofing - Bitumen damp
proof sheets including bitumen basement tanking
sheets - Definitions and characteristics
EN 13969:2004/A1:2006 as implemented nationally
by MSA EN 13969:2005/A1:2006
Flexible sheets for waterproofing - Bitumen damp
proof sheets including bitumen basement tanking
sheets - Definitions and characteristics
EN 13970:2004 as implemented nationally by MSA
EN 13970:2005
Flexible sheets for waterproofing - Bitumen water
vapour control layers - Definitions and characteristics
EN 13970:2004/A1:2006 as implemented nationally
by MSA EN 13970:2005/A1:2006
Flexible sheets for waterproofing - Bitumen water
vapour control layers - Definitions and characteristics
EN 13978-1:2005 as implemented nationally by
MSA EN 13978-1:2005
Precast concrete products - Precast concrete garages -
Part 1: Requirements for reinforced garages
monolithic or consisting of single sections with room
dimensions
EN 13984:2004 as implemented nationally by MSA
EN 13984:2005
Flexible sheets for waterproofing - Plastic and rubber
vapour control layers - Definitions and characteristics
B
EN 13984:2004/A1:2006 as implemented nationally
by MSA EN 13984:2005/A1:2006
Flexible sheets for waterproofing - Plastic and rubber
vapour control layers - Definitions and characteristics
EN 13986:2004 as implemented nationally by MSA
EN 13986:2004
Wood-based panels for use in construction -
Characteristics, evaluation of conformity and marking
EN 14016-1:2004 as implemented nationally by
MSA EN 14016-1:2004
Binders for magnesite screeds – Caustic magnesia and
magnesium chloride – Part 1: Definitions,
requirements
EN 14023:2010 as implemented nationally by MSA
EN 14023:2010
Bitumen and bituminous binders - Specification
framework for polymer modified bitumens
EN 14037-1:2003 as implemented nationally by
MSA EN 14037-1:2003
Ceiling mounted radiant panels supplied with water at
temperature below 120 °C - Part 1: Technical
specifications and requirements
EN 14041:2004 as implemented nationally by MSA
EN 14041:2004
Resilient, textile and laminate floor coverings –
Essential characteristics
EN 14041:2004/AC:2006 as implemented nationally
by MSA EN 14041:2004/AC:2006
Resilient, textile and laminate floor coverings –
Essential characteristics
EN 14063-1:2004 as implemented nationally by
MSA EN 14063-1:2004
Thermal insulation materials and products – In-situ
formed expanded clay lightweight aggregate products
(LWA) – Part 1: Specification for the loose-fill
products before installation
EN
14063-1:2004/AC:2006 as
implemented
nationally by MSA EN 14063-1:2004/AC:2007
Thermal insulation materials and products – In-situ
formed expanded clay lightweight aggregate products
(LWA) – Part 1: Specification for the loose-fill
products before installation
EN 14064-1:2010 as implemented nationally by
MSA EN 14064-1:2010
Thermal insulation products for buildings - In-situ
formed loose-fill mineral wool (MW) products – Part
1: Specification for the loose-fill products before
installation
EN 14080:2005 as implemented nationally by MSA
EN 14080:2005
Timber structures - Glued laminated timber –
Requirements
EN 14081-1:2005 as implemented nationally by
MSA EN 14081-1:2005
Timber structures - Strength graded structural timber
with rectangular cross section - Part 1: General
requirements
EN 14178-2:2004 as implemented nationally by
MSA EN 14178-2:2004
Glass in building - Basic alkaline earth silicate glass
products - Part 2: Evaluation of conformity/Product
standard
EN 14179-2:2005 as implemented nationally by
MSA EN 14179-2:2005
Glass in building - Heat soaked thermally toughened
soda lime silicate safety glass - Part 2: Evaluation of
conformity/Product standard
EN 14188-1:2004 as implemented nationally by
MSA EN 14188-1:2004
Joint fillers and sealants - Part 1: Specifications for hot
applied sealants
EN 14188-2:2004 as implemented nationally by
MSA EN 14188-2:2005
Joint fillers and sealants - Part 2: Specifications for
cold applied sealants
EN 14188-3:2006 as implemented nationally by
MSA EN 14188-3:2006
Joint fillers and sealants - Part 3: Specifications for
preformed joint seals
EN 14190:2005 as implemented nationally by MSA
EN 14190:2005
Gypsum plasterboard products from reprocessing -
Definitions, requirements and test methods
B
EN 14195:2005 as implemented nationally by MSA
EN 14195:2005
Metal framing components for gypsum plasterboard
systems - Definitions, requirements and test methods
EN 14195:2005/AC:2006 as implemented nationally
by MSA EN 14195:2005/AC:2006
Metal framing components for gypsum plasterboard
systems - Definitions, requirements and test methods
EN 14209:2005 as implemented nationally by MSA
EN 14209:2005
Preformed plasterboard cornices - Definitions,
requirements and test methods
EN 14216:2004 as implemented nationally by MSA
EN 14216:2004
Cement – Composition, specifications and conformity
criteria for very low heat special cements
EN 14246:2006 as implemented nationally by MSA
EN 14246:2006
Gypsum elements for suspended ceilings - Definitions,
requirements and test methods
EN 14246:2006/AC:2007 as implemented nationally
by MSA EN 14246:2006/AC:2007
Gypsum elements for suspended ceilings - Definitions,
requirements and test methods
EN 14250:2010 as implemented nationally by MSA
EN 14250:2010
Timber structures - Product requirements for
prefabricated structural members assembled with
punched metal plate fasteners
EN 14296:2005 as implemented nationally by MSA
EN 14296:2005
Sanitary appliances - Communal washing troughs
EN 14303:2009 as implemented nationally by MSA
EN 14303:2009
Thermal insulation products for building equipment
and industrial installations - Factory made mineral
wool (MW) products – Specification
EN 14304:2009 as implemented nationally by MSA
EN 14304:2009
Thermal insulation products for building equipment
and industrial installations - Factory made flexible
elastomeric foam (FEF) products – Specification
EN 14305:2009 as implemented nationally by MSA
EN 14305:2009
Thermal insulation products for building equipment
and industrial installations - Factory made cellular
glass (CG) products – Specification
EN 14306:2009 as implemented nationally by MSA
EN 14306:2009
Thermal insulation products for building equipment
and industrial installations - Factory made calcium
silicate (CS) products – Specification
EN 14307:2009 as implemented nationally by MSA
EN 14307:2009
Thermal insulation products for building equipment
and industrial installations - Factory made extruded
polystyrene foam (XPS) products – Specification
EN 14308:2009 as implemented nationally by MSA
EN 14308:2009
Thermal insulation products for building equipment
and industrial installations - Factory made rigid
polyurethane foam (PUR) and polyisocyanurate foam
(PIR) products – Specification
EN 14309:2009 as implemented nationally by MSA
EN 14309:2009
Thermal insulation products for building equipment
and industrial installations - Factory made products of
expanded polystyrene (EPS) – Specification
EN 14313:2009 as implemented nationally by MSA
EN 14313:2009
Thermal insulation products for building equipment
and industrial installations - Factory made
polyethylene foam (PEF) products - Specification
EN 14314:2009 as implemented nationally by MSA
EN 14314:2009
Thermal insulation products for building equipment
and industrial installations - Factory made phenolic
foam (PF) products – Specification
EN 14316-1:2004 as implemented nationally by
MSA EN 14316-1:2004
Thermal insulation products for buildings - In-situ
thermal insulation formed from expanded perlite (EP)
products - Part 1: Specification for bonded and loose-
fill products before installation
B
EN 14317-1:2004 as implemented nationally by
MSA EN 14317-1:2004
Thermal insulation products for buildings – In-situ
thermal insulation formed from exfoliated vermiculite
(EV) products – Part 1: Specification for bonded and
loose-fill products before installation
EN 14321-2:2005 as implemented nationally by
MSA EN 14321-2:2005
Glass in building - Thermally toughened alkaline earth
silicate safety glass - Part 2: Evaluation of
conformity/Product standard
EN 14339:2005 as implemented nationally by MSA
EN 14339:2005
Underground fire hydrants
EN 14342:2005+A1:2008 as implemented nationally
by MSA EN 14342:2005+A1:2008
Wood flooring - Characteristics, evaluation of
conformity and marking
EN 14351-1:2006+A1:2010 as implemented
nationally by MSA EN 14351-1:2006+A1:2010
Windows and doors - Product standard, performance
characteristics - Part 1: Windows and external
pedestrian doorsets without resistance to fire and/or
smoke leakage characteristics
EN 14353:2007+A1:2010 as implemented nationally
by MSA EN 14353:2007+A1:2010
Metal beads and feature profiles for use with gypsum
plasterboards - Definitions, requirements and test
methods
EN 14374:2004 as implemented nationally by MSA
EN 14374:2004
Timber structures - Structural laminated veneer lumber
– Requirements
EN 14384:2005 as implemented nationally by MSA
EN 14384:2005
Pillar fire hydrants
EN 14388:2005 as implemented nationally by MSA
EN 14388:2005
Road traffic noise reducing devices – Specifications
EN 14388:2005/AC:2008 as implemented nationally
by MSA EN 14388:2005/AC:2008
Road traffic noise reducing devices – Specifications
EN 14396:2004 as implemented nationally by MSA
EN 14396:2004
Fixed ladders for manholes
EN 14399-1:2005 as implemented nationally by
MSA EN 14399-1:2005
High-strength structural bolting assemblies for
preloading - Part 1: General requirements
EN 14411:2006 as implemented nationally by MSA
EN 14411:2007
Ceramic
tiles
–
Definitions,
classification,
characteristics and marking (ISO 13006:1998,
modified)
EN
14428:2004+A1:2008
as
implemented
nationally by MSA EN 14428:2004+A1:2008
Shower enclosures - Functional requirements and test
methods
EN 14449:2005 as implemented nationally by MSA
EN 14449:2005
Glass in building – Laminated glass and laminated
safety glass – Evaluation of conformity/Product
standard
EN 14449:2005/AC:2005 as implemented nationally
by MSA EN 14449:2005/AC:2006
Glass in building – Laminated glass and laminated
safety glass – Evaluation of conformity/Product
standard
EN 14471:2005 as implemented nationally by MSA
EN 14471:2005
Chimneys - System chimneys with plastic flue liners -
Requirements and test methods
EN 14496:2005 as implemented nationally by MSA
EN 14496:2005
Gypsum based adhesives for thermal/acoustic
insulation composite panels and plasterboards -
Definitions, requirements and test methods
B
EN 14509:2006 as implemented nationally by MSA
EN 14509:2006
Self-supporting double skin metal faced insulating
panels - Factory made products – Specifications
EN 14509:2006/AC:2008 as implemented nationally
by MSA EN 14509:2006/AC:2008
Self-supporting double skin metal faced insulating
panels - Factory made products – Specifications
EN
14516:2006+A1:2010
as
implemented
nationally by MSA EN 14516:2006+A1:2010
Baths for domestic purposes
EN
14527:2006+A1:2010
as
implemented
nationally by MSA EN 14527:2006+A1:2010
Shower trays for domestic purposes
EN 14528:2007 as implemented nationally by MSA
EN 14528:2008
Bidets - Functional requirements and test methods
EN 14545:2008 as implemented nationally by MSA
EN 14545:2008
Timber structures - Connectors – Requirements
EN 14566:2008+A1:2009 as implemented nationally
by MSA EN 14566:2008+A1:2009
Mechanical fasteners for gypsum plasterboard systems
- Definitions, requirements and test methods
EN 14592:2008 as implemented nationally by MSA
EN 14592:2008
Timber structures - Dowel-type fasteners –
Requirements
EN 14604:2005 as implemented nationally by MSA
EN 14604:2005
Smoke alarm devices
EN 14604:2005/AC:2008 as implemented nationally
by MSA EN 14604:2005/AC:2008
Smoke alarm devices
EN 14647:2005 as implemented nationally by MSA
EN 14647:2005
Calcium
aluminate
cement
-
Composition,
specifications and conformity criteria
EN 14647:2005/AC:2006 as implemented nationally
by MSA EN 14647:2005/AC:2006
Calcium
aluminate
cement
-
Composition,
specifications and conformity criteria
EN 14680:2006 as implemented nationally by MSA
EN 14680:2006
Adhesives for non-pressure thermoplastic piping
systems – Specifications
EN 14688:2006 as implemented nationally by MSA
EN 14688:2006
Sanitary appliances - Wash basins - Functional
requirements and test methods
EN 14695:2010 as implemented nationally by MSA
EN 14695:2010
Flexible sheets for waterproofing – Reinforced
bitumen sheets for waterproofing of concrete bridge
decks and other trafficked areas of concrete -
Definitions and characteristics
EN 14716:2004 as implemented nationally by MSA
EN 14716:2005
Stretched ceilings - Requirements and test methods
EN 14782:2006 as implemented nationally by MSA
EN 14782:2006
Self-supporting metal sheet for roofing, external
cladding and internal lining - Product specification and
requirements
EN 14783:2006 as implemented nationally by MSA
EN 14783:2006
Fully supported metal sheet and strip for roofing,
external cladding and internal lining - Product
specification and requirements
B
EN 14785:2006 as implemented nationally by MSA
EN 14785:2006
Residential space heating appliances fired by wood
pellets - Requirements and test methods
EN 14800:2007 as implemented nationally by MSA
EN 14800:2007
Corrugated safety metal hose assemblies for the
connection of domestic appliances using gaseous fuels
EN 14814:2007 as implemented nationally by MSA
EN 14814:2007
Adhesives for thermoplastic piping systems for fluids
under pressure – Specifications
EN 14843:2007 as implemented nationally by MSA
EN 14843:2007
Precast concrete products – Stairs
EN 14844:2006+A1:2008 as implemented nationally
by MSA EN 14844:2006+A1:2008
Precast concrete products - Box culverts
EN 14889-1:2006 as implemented nationally by
MSA EN 14889-1:2006
Fibres for concrete - Part 1: Steel fibres - Definitions,
specifications and conformity
EN 14889-2:2006 as implemented nationally by
MSA EN 14889-2:2006
Fibres for concrete - Part 2: Polymer fibres -
Definitions, specifications and conformity
EN 14904:2006 as implemented nationally by MSA
EN 14904:2006
Surfaces for sports areas - Indoor surfaces for multi-
sports use – Specification
EN 14909:2006 as implemented nationally by MSA
EN 14909:2006
Flexible sheets for waterproofing - Plastic and rubber
damp proof courses - Definitions and characteristics
EN 14915:2006 as implemented nationally by MSA
EN 14915:2006
Solid wood panelling and cladding - Characteristics,
evaluation of conformity and marking
EN 14915:2006/AC:2007 as implemented nationally
by MSA EN 14915:2006/AC:2007
Solid wood panelling and cladding - Characteristics,
evaluation of conformity and marking
EN 14933:2007 as implemented nationally by MSA
EN 14933:2007
Thermal insulation and light weight fill products for
civil engineering applications - Factory made products
of expanded polystyrene (EPS) - Specification
EN 14934:2007 as implemented nationally by MSA
EN 14934:2007
Thermal insulation and light weight fill products for
civil engineering applications - Factory made products
of extruded polystyrene foam (XPS) – Specification
EN 14963:2006 as implemented nationally by MSA
EN 14963:2006
Roof coverings - Continuous rooflights of plastics
with or without upstands - Classification, requirements
and test methods
EN 14964:2006 as implemented nationally by MSA
EN 14964:2006
Rigid underlays for discontinuous roofing –
Definitions and characteristics
EN 14967:2006 as implemented nationally by MSA
EN 14967:2006
Flexible sheets for waterproofing - Bitumen damp
proof courses - Definitions and characteristics
EN 14989-1:2007 as implemented nationally by
MSA EN 14989-1:2007
Chimneys - Requirements and test methods for metal
chimneys and material independent air supply ducts
for roomsealed heating applications - Part 1: Vertical
air/flue terminals for C6-type appliances
EN 14989-2:2007 as implemented nationally by
MSA EN 14989-2:2007
Chimneys - Requirements and test methods for metal
chimneys and material independent air supply ducts
for roomsealed heating applications - Part 2: Flue and
air supply ducts for room sealed appliances
B
EN 14991:2007 as implemented nationally by MSA
EN 14991:2007
Precast concrete products - Foundation elements
EN 14992:2007 as implemented nationally by MSA
EN 14992:2007
Precast concrete products - Wall elements
EN 15037-1:2008 as implemented nationally by
MSA EN 15037-1:2008
Precast concrete products - Beam-and-block floor
systems - Part 1: Beams
EN 15037-4:2010 as implemented nationally by
MSA EN 15037-4:2010
Precast concrete products - Beam-and-block floor
systems - Part 4: Expanded polystyrene blocks
EN 15048-1:2007 as implemented nationally by
MSA EN 15048-1:2007
Non-preloaded structural bolting assemblies - Part 1
General requirements
EN 15050:2007 as implemented nationally by MSA
EN 15050:2007
Precast concrete products - Bridge elements
EN 15069:2008 as implemented nationally by MSA
EN 15069:2008
Safety gas connection valves for metal hose
assemblies used for the connection of domestic
appliances using gaseous fuel
EN 15088:2005 as implemented nationally by MSA
EN 15088:2006
Aluminium and aluminium alloys - Structural products
for construction works - Technical conditions for
inspection and delivery
EN 15102:2007 as implemented nationally by MSA
EN 15102:2007
Decorative wallcoverings - Roll and panel form
products
EN 15129:2009 as implemented nationally by MSA
EN 15129:2009
Anti-seismic devices
EN 15167-1:2006 as implemented nationally by
MSA EN 15167-1:2006
Ground granulated blast furnace slag for use in
concrete, mortar and grout - Part 1: Definitions,
specifications and conformity criteria
EN 15250:2007 as implemented nationally by MSA
EN 15250:2007
Slow heat release appliances fired by solid fuel -
Requirements and test methods
EN 15258:2008 as implemented nationally by MSA
EN 15258:2008
Precast concrete products - Retaining wall elements
EN 15274:2007 as implemented nationally by MSA
EN 15274:2007
General purpose adhesives for structural assembly -
Requirements and test methods
EN 15275:2007 as implemented nationally by MSA
EN 15275:2007
Structural adhesives – Characterisation of anaerobic
adhesives for co-axial metallic assembly in building
and civil engineering structures
EN 15275:2007/AC:2010 as implemented nationally
by MSA EN 15275:2007/AC:2010
Structural adhesives – Characterisation of anaerobic
adhesives for co-axial metallic assembly in building
and civil engineering structures
EN 15283-1:2008+A1:2009 as implemented
nationally by MSA EN 15283-1:2008+A1:2009
Gypsum boards with fibrous reinforcement -
Definitions, requirements and test methods - Part 1
Gypsum boards with mat reinforcement
EN 15283-2:2008+A1:2009 as implemented
nationally by MSA EN 15283-2:2008+A1:2009
Gypsum boards with fibrous reinforcement -
Definitions, requirements and test methods - Part 2
Gypsum fibre boards
B
EN 15285:2008 as implemented nationally by MSA
EN 15285:2008
Agglomerated stone - Modular tiles for flooring and
stairs (internal and external)
EN 15285:2008/AC:2008 as implemented nationally
by MSA EN 15285:2008/AC:2008
Agglomerated stone - Modular tiles for flooring and
stairs (internal and external)
EN 15322:2009 as implemented nationally by MSA
EN 15322:2009
Bitumen and bituminous binders - Framework for
specifying cut-back and fluxed bituminous binders
EN 15381:2008 as implemented nationally by MSA
EN 15381:2008
Geotextiles and geotextile-related products -
Characteristics required fro use in pavements and
asphalt overlays
EN 15382:2008 as implemented nationally by MSA
EN 15382:2008
Geosynthetic barriers - Characteristics required for use
in transportation infrastructure
EN 15435:2008 as implemented nationally by MSA
EN 15435:2008
Precast concrete products - Normal weight and
lightweight concrete shuttering blocks - Product
properties and performance
EN 15498:2008 as implemented nationally by MSA
EN 15498:2008
Precast concrete products - Wood-chip concrete
shuttering blocks - Product properties and performance
EN 15599-1:2010 as implemented nationally by
MSA EN 15599-1:2010
Thermal insulation products for building equipment
and industrial installations - In-situ thermal insulation
formed from expanded perlite (EP) products - Part 1
Specification for bonded and loose-fill products before
installation
EN 15600-1:2010 as implemented nationally by
MSA EN 15600-1:2010
Thermal insulation products for building equipment
and industrial installations - In-situ thermal insulation
formed from exfoliated vermiculite (EV) products -
Part 1: Specification for bonded and loose-fill products
before installation
EN 15743:2010 as implemented nationally by MSA
EN 15743:2010
Supersulfated cement - Composition, specifications
and conformity criteria
EN 15821:2010 as implemented nationally by MSA
EN 15821:2010
Multi-firing sauna stoves fired by natural wood logs -
Requirements and test methods
EN 15824:2009 as implemented nationally by MSA
EN 15824:2009
Specification for external renders and internal plasters
based on organic binders
B
€13.04