MT
Construction Products (Amendment) Regulations, 2010
Statutory Text (3 Articles)
Suppliment tal-Gazzetta tal-Gvern ta’ Malta Nru. 18,618, 9 ta’ Lulju, 2010
LN 347 of 2010
PRODUCT SAFETY ACT
(CAP. 427)
Construction Products (Amendment) Regulations, 2010
IN exercise of the powers conferred by articles 38 and 39 of
the Product Safety Act, the Prime Minister, on the advice of the
Malta Standards Authority, has made the following regulations:-
The title of these regulations is the Construction Products Citation.
(Amendment) Regulations, 2010, and they shall be read and
construed as one with the Construction Products Regulations, L.N. 270 of 2001.
2001, hereinafter referred to as “the principal regulations”.
Schedule V to the principal regulations shall be Substitutes Schedule
substituted as follows
“Schedule V
LIST OF HARMONISED STANDARDS
Harmonised standards of construction products for which CE
marking is mandatory
EN 1:1998 as implemented nationally by MSA EN 1:2000
Flued oil stoves with vaporizing burners
EN 1:1998/A1:2007 as implemented nationally by MSA EN
1:2000/A1:2007
Flued oil stoves with vaporizing burners
EN 40-4:2005 as implemented nationally by MSA EN 40-
4:2006
Lighting columns - Part 4: Requirements for reinforced and
prestressed concrete lighting columns
EN 40-4:2005/AC:2006 as implemented nationally by MSA EN
40-4:2006/AC:2006
Lighting columns - Part 4: Requirements for reinforced and
prestressed concrete lighting columns
EN 40-5:2002 as implemented nationally by MSA EN 40-
5:2002
Lighting columns - Part 5: Requirements for steel lighting columns
EN 40-6:2002 as implemented nationally by MSA EN 40-
6:2002
Lighting columns - Part 6: Requirements for aluminium lighting
columns
EN 40-7:2002 as implemented nationally by MSA EN 40-
7:2003
Lighting columns - Part 7: Requirements for fibre reinforced
polymer composite lighting columns
EN 54-2:1997 as implemented nationally by MSA EN 54-
2:2000
Fire detection and fire alarm systems - Part 2: Control and
indicating equipment
EN 54-2:1997/A1:2006 as implemented nationally by MSA EN
54-2:2000/A1:2006
Fire detection and fire alarm systems - Part 2: Control and
indicating equipment
EN 54-2:1997/AC:1999 as implemented nationally by MSA EN
54-2:2000/AC:1999
Fire detection and fire alarm systems - Part 2: Control and
indicating equipment
EN 54-3:2001/A1:2002 as implemented nationally by MSA EN
54-3:2001/A1:2002
Fire detection and fire alarm systems - Part 3: Fire alarm devices -
Sounders
EN 54-3:2001/A2:2006 as implemented nationally by MSA EN
54-3:2001/A2:2006
Fire detection and fire alarm systems - Part 3: Fire alarm devices -
Sounders
EN 54-4:1997as implemented nationally by MSA EN 54-4:2000
Fire detection and fire alarm systems - Part 4: Power supply
equipment
EN 54-4:1997/A1:2002 as implemented nationally by MSA EN
54-4:2000/A1:2003
Fire detection and fire alarm systems - Part 4: Power supply
equipment
EN 54-4:1997+A2:2006 as implemented nationally by MSA EN
54-4:2000+A2:2006
Fire detection and fire alarm systems - Part 4: Power supply
equipment
EN 54-4:1997/AC:1999 as implemented nationally by MSA EN
54-4:2000/AC:1999
Fire detection and fire alarm systems - Part 4: Power supply
equipment
EN 54-5:2000/A1:2002 as implemented nationally by MSA EN
54-5:2000/A1:2002
Fire detection and fire alarm systems - Part 5: Heat detectors -
Point detectors
EN 54-7:2000/A1:2002 as implemented nationally by MSA EN
54-7:2000/A1:2002
Fire detection and fire alarm systems - Part 7: Smoke detectors -
Point detectors using scattered light, transmitted light or ionization
EN 54-7:2000/A2:2006 as implemented nationally by MSA EN
54-7:2000/A2:2006
Fire detection and fire alarm systems - Part 7: Smoke detectors -
Point detectors using scattered light, transmitted light or ionization
EN 54-10:2002 as implemented nationally by MSA EN 54-
10:2002
Fire detection and fire alarm systems - Part 10: Flame detectors -
Point detectors
EN 54-10:2002/A1:2005 as implemented nationally by MSA EN
54-10:2002/A1:2005
Fire detection and fire alarm systems - Part 10: Flame detectors -
Point detectors
EN 54-11:2001 as implemented nationally by MSA EN 54-
11:2001
Fire detection and fire alarm systems - Part 11: Manual call points
EN 54-11:2001/A1:2005 as implemented nationally by MSA EN
54-11:2001/A1:2005
Fire detection and fire alarm systems - Part 11: Manual call points
EN 54-12:2002 as implemented nationally by MSA EN 54-
12:2003
Fire detection and fire alarm systems – Part 12: Smoke detectors –
Line detectors using an optical light beam
EN 54-16:2008 as implemented nationally by MSA EN 54-
16:2008
Fire detection and fire alarm systems - Part 16: Voice alarm control
and indicating equipment
EN 54-17:2005 as implemented nationally by MSA EN 54-
17:2006
Fire detection and fire alarm systems - Part 17: Short-circuit
isolators
EN 54-17:2005/AC:2007 as implemented nationally by MSA
EN 54-17:2006/AC:2007
Fire detection and fire alarm systems - Part 17: Short-circuit
isolators
EN 54-18:2005 as implemented nationally by MSA EN 54-
18:2006
Fire detection and fire alarm systems - Part 18: Input/output
devices
EN 54-18:2005/AC:2007 as implemented nationally by MSA
EN 54-18:2006/AC:2007
Fire detection and fire alarm systems - Part 18: Input/output
devices
EN 54-20:2006 as implemented nationally by MSA EN 54-
20:2006
Fire detection and fire alarm systems - Part 20: Aspirating smoke
detectors
EN 54-20:2006/AC:2008 as implemented nationally by MSA
EN 54-20:2006/AC:2008
Fire detection and fire alarm systems - Part 20: Aspirating smoke
detectors
EN 54-21:2006 as implemented nationally by MSA EN 54-
21:2006
Fire detection and fire alarm systems - Part 21: Alarm transmission
and fault warning routing equipment
EN 54-24:2008 as implemented nationally by MSA EN 54-
24:2008
Fire detection and fire alarm systems - Part 24: Components of
voice alarm systems – Loudspeakers
EN 54-25:2008 as implemented nationally by MSA EN 54-
25:2008
Fire detection and fire alarm systems - Part 25: Components using
radio links
EN 179:2008 as implemented nationally by MSA EN 179:2008
Building hardware - Emergency exit devices operated by a lever
handle or push pad, for use on escape routes - Requirements and
test methods
EN 197-1:2000 as implemented nationally by MSA EN 197-
1:2000
Cement-Part 1: Composition, specifications and conformity criteria
for common cements
EN 197-1:2000/A1:2004 as implemented nationally by MSA EN
197-1:2000/A1:2004
Cement-Part 1: Composition, specifications and conformity criteria
for common cements
EN 197-1:2000/A3:2007 as implemented nationally by MSA EN
197-1:2000/A3:2007
Cement-Part 1: Composition, specifications and conformity criteria
for common cements
EN 197-4:2004 as implemented nationally by MSA EN 197-
4:2004
Cement – Part 4: Composition, specifications and conformity
criteria for low early strength blastfurnace cements
EN 295-10:2005 as implemented nationally by MSA EN 295-
10:2005
Vitrified clay pipes and fittings and pipe joints for drains and
sewers - Part 10: Performance requirements
EN 413-1:2004 as implemented nationally by MSA EN 413-
1:2004
Masonry cement – Part 1: Composition, specifications and
conformity criteria
EN 416-1:2009 as implemented nationally by MSA EN 416-
1:2009
Single burner gas-fired overhead radiant tube heaters for non-
domestic use - Part 1: Safety
EN 438-7:2005 as implemented nationally by MSA EN 438-
7:2005
High-pressure decorative laminates (HPL) - Sheets based on
thermosetting resins (Usually called Laminates) - Part 7: Compact
laminate and HPL composite panels for internal and external wall
and ceiling finishes
EN 442-1:1995 as implemented nationally by MSA EN 442-
1:2000
Radiators and convectors – Part 1: Technical specifications and
requirements
EN 442-1:1995/A1:2003 as implemented nationally by MSA EN
442-1:2000/A1:2003
Radiators and convectors – Part 1: Technical specifications and
requirements
EN 450-1:2005+A1:2007 as implemented nationally by MSA
EN 450-1:2005+A1:2007
Fly ash for concrete - Part 1: Definition, specifications and
conformity criteria
EN 459-1:2001 as implemented nationally by MSA EN 459-
1:2002
Building lime-Part 1: Definitions, specifications and conformity
criteria
EN 459-1:2001/AC:2002 as implemented nationally by MSA
EN 459-1:2002/AC:2002
Building lime-Part 1: Definitions, specifications and conformity
criteria
EN 490:2004 as implemented nationally by MSA EN 490:2005
Concrete roofing tiles and fittings for roof covering and wall
cladding - Product specifications
EN 490:2004/A1:2006 as implemented nationally by MSA EN
490:2005/A1:2006
Concrete roofing tiles and fittings for roof covering and wall
cladding - Product specifications
EN 492:2004 as implemented nationally by MSA EN 492:2005
Fibre-cement slates and fittings - Product specification and test
methods
EN 492:2004/A1:2005 as implemented nationally by MSA EN
492:2005/A1:2005
Fibre-cement slates and fittings - Product specification and test
methods
EN 492:2004/A2:2006 as implemented nationally by MSA EN
492:2005/A2:2006
Fibre-cement slates and fittings - Product specification and test
methods
EN 494:2004+A3:2007 as implemented nationally by MSA EN
494:2005+A3:2007
Fibre-cement profiled sheets and fittings - Product specification
and test methods
EN 516:2006 as implemented nationally by MSA EN 516:2006
Prefabricated accessories for roofing - Installations for roof access
- Walkways, treads and steps
EN 517:2006 as implemented nationally by MSA EN 517:2006
Prefabricated accessories for roofing - Roof safety hooks
EN 520:2004+A1:2009 as implemented nationally by MSA EN
520:2004+A1:2009
Gypsum plasterboards – Definitions, requirements and test
methods
EN 523:2003 as implemented nationally by MSA EN 523:2003
Steel strip sheaths for prestressing tendons – Terminology,
requirements, quality control
EN 534:2006 as implemented nationally by MSA EN 534:2006
Corrugated bitumen sheets - Product specification and test methods
EN 544:2005 as implemented nationally by MSA EN 544:2006
Bitumen shingles with mineral and/or synthetic reinforcements -
Product specification and test methods
EN 572-9:2004 as implemented nationally by MSA EN 572-
9:2004
Glass in building - Basic soda lime silicate glass products - Part 9
Evaluation of conformity/Product standard
EN 588-2:2001 as implemented nationally by MSA EN 588-
2:2002
Fibre cement pipes for drains and sewers-Part 2: Manholes and
inspection chambers
EN 598:2007+A1:2009 as implemented nationally by MSA EN
598:2007+A1:2009
Ductile iron pipes, fittings, accesories and their joints for sewerage
applications - Requirements and test methods
EN 621:2009 as implemented nationally by MSA EN 621:2009
Non-domestic gas-fired forced convection air heaters for space
heating not exceeding a net heat input of 300 kW, without a fan to
assist transportation of combustion air and/or combustion products
EN 671-1:2001 as implemented nationally by MSA EN 671-
1:2001
Fixed firefighting systems - Hose systems - Part 1: Hose reels with
semi-rigid hose
EN 671-1:2001/AC:2002 as implemented nationally by MSA
EN 671-1:2001/AC:2002
Fixed firefighting systems - Hose systems - Part 1: Hose reels with
semi-rigid hose
EN 671-2:2001 as implemented nationally by EN 671-2:2001
Fixed firefighting systems - Hose systems - Part 2: Hose systems
with lay-flat hose
EN 671-2:2001/A1:2004 as implemented nationally by EN 671-
2:2001/A1:2004
Fixed firefighting systems - Hose systems - Part 2: Hose systems
with lay-flat hose
EN 681-1:1996 as implemented nationally by MSA EN 681-
1:2000
Elastomeric seals - Material requirements for pipe joint seal
used in water and drainage applications - Part 1: Vulcanized
rubber
EN 681-1:1996/A1:1998 as implemented nationally by MSA EN
681-1:2000/A1:2000
Elastomeric seals - Material requirements for pipe joint seal used in
water and drainage applications - Part 1: Vulcanized rubber
EN 681-1:1996/A2:2002 as implemented nationally by MSA EN
681-1:2000/A2:2002
Elastomeric seals - Material requirements for pipe joint seal used
in water and drainage applications - Part 1: Vulcanized rubber
EN 681-1:1996/A3:2005 as implemented nationally by MSA EN
681-1:2000/A3:2005
Elastomeric seals - Material requirements for pipe joint seal used
in water and drainage applications - Part 1: Vulcanized rubber
EN 681-2:2000 as implemented nationally by MSA EN 681-
2:2000
Elastomeric seals - Material requirements for pipe joint seals
used in water and drainage applications - Part 2: Thermoplastic
elastomers
EN 681-2:2000/A1:2002 as implemented nationally by MSA EN
681-2:2000/A1:2002
Elastomeric seals - Material requirements for pipe joint seals
used in water and drainage applications - Part 2: Thermoplastic
elastomers
EN 681-2:2000/A2:2005 as implemented nationally by MSA EN
681-2:2000/A2:2005
Elastomeric seals - Material requirements for pipe joint seals
used in water and drainage applications - Part 2: Thermoplastic
elastomers
EN 681-3:2000 as implemented nationally by MSA EN 681-
3:2000
Elastomeric seals - Material requirements for joint seals used in
water and drainage applications - Part 3: Cellular materials of
vulcanized rubber
EN 681-3:2000/A1:2002 as implemented nationally by MSA EN
681-3:2000/A1:2002
Elastomeric seals - Material requirements for joint seals used in
water and drainage applications - Part 3: Cellular materials of
vulcanized rubber
EN 681-4:2000 as implemented nationally by MSA EN 681-
4:2000
Elastomeric seals - Material requirements for pipe joint seals used
in water and drainage applications - Part 4: Cast polyurethane
sealing elements
EN 681-4:2000/A1:2002 as implemented nationally by MSA EN
681-4:2000/A1:2002
Elastomeric seals - Material requirements for pipe joint seals used
in water and drainage applications - Part 4: Cast polyurethane
sealing elements
EN 682:2002 as implemented nationally by MSA EN 682:2002
Elastomeric seals - Materials requirements for seals used in pipes
and fittings carrying gas and hydrocarbon fluids
EN 771-1:2003 as implemented nationally by MSA EN 771-
1:2003
Specification for masonry units - Part 1: Clay masonry units
EN 771-1:2003/A1:2005 as implemented nationally by MSA EN
771-1:2003/A1:2005
Specification for masonry units - Part 1: Clay masonry units
EN 771-2:2003 as implemented nationally by MSA EN 771-
2:2003
Specification for masonry units – Part 2: Calcium silicate masonry
units
EN 771-2:2003/A1:2005 as implemented nationally by MSA EN
771-2:2003/A1:2005
Specification for masonry units – Part 2: Calcium silicate masonry
units
EN 771-3:2003 as implemented nationally by MSA EN 771-
3:2003
Specification for masonry units – Part 3: Aggregate concrete
masonry units – Part 3: Aggregate concrete masonry units (Dense
and light-weight aggregates)
EN 771-3:2003/A1:2005 as implemented nationally by MSA EN
771-3:2003/A1:2005
Specification for masonry units – Part 3: Aggregate concrete
masonry units – Part 3: Aggregate concrete masonry units (Dense
and light-weight aggregates)
EN 771-4:2003 as implemented nationally by MSA EN 771-
4:2003
Specification for masonry units – Part 4: Autoclaved aerated
concrete masonry units
EN 771-4:2003/A1:2005 as implemented nationally by MSA EN
771-4:2003/A1:2005
Specification for masonry units – Part 4: Autoclaved aerated
concrete masonry units
EN 771-5:2003 as implemented nationally by MSA EN 771-
5:2004
Specification for masonry units – Part 5: Manufactured stone
masonry units
EN 771-5:2003/A1:2005 as implemented nationally by MSA EN
771-5:2004/A1:2005
Specification for masonry units – Part 5: Manufactured stone
masonry units
EN 771-6:2005 as implemented nationally by MSA EN 771-
6:2005
Specification for masonry units - Part 6: Natural stone masonry
units
EN 777-1:2009 as implemented nationally by MSA EN 777-
1:2009
Multi-burner gas-fired overhead radiant tube heater systems for
non-domestic use - Part 1: System D - Safety
EN 777-2:2009 as implemented nationally by MSA EN 777-
2:2009
Multi-burner gas-fired overhead radiant tube heater systems for
non-domestic use - Part 2: System E – Safety
EN 777-3:2009 as implemented nationally by MSA EN 777-
3:2009
Multi-burner gas-fired overhead radiant tube heater systems for
non domestic use - Part 3: System F – Safety
EN 777-4:2009 as implemented nationally by MSA EN 777-
4:2009
Multi-burner gas-fired overhead radiant tube heater systems for
non-domestic use - Part 4: System H - Safety
EN 778:2009 as implemented nationally by MSA EN 778:2009
Domestic gas-fired forced convection air heaters for space heating
not exceeding a net heat input of 70 kW, without a fan to assist
transportation of combustion air and/or combustion products
EN 845-1:2003+A1:2008 as implemented nationally by MSA
EN 845-1:2003+A1:2008
Specification for ancillary components for masonry - Part 1: Ties,
tension straps, hangers and brackets
EN 845-2:2003 as implemented nationally by MSA EN 845-
2:2003
Specification for ancillary components for masonry - Part 2
Lintels
EN 845-3:2003+A1:2008 as implemented nationally by MSA
EN 845-3:2003+A1:2008
Specification for ancillary components for masonry - Part 3: Bed
joint reinforcement of steel meshwork
EN 858-1:2002 as implemented nationally by MSA EN 858-
1:2002
Separator systems for light liquids (e.g. oil and petrol) - Part 1
Principles of product design, performance and testing, marking and
quality control
EN 858-1:2002/A1:2004 as implemented nationally by MSA EN
858-1:2002/A1:2004
Separator systems for light liquids (e.g. oil and petrol) - Part 1
Principles of product design, performance and testing, marking and
quality control
EN 877:1999 as implemented nationally by MSA EN 877:2000
Cast iron pipes and fittings, their joints and accessories for
the evacuation of water from buildings - Requirements, test
methods and quality assurance
EN 877:1999/A1:2006 as implemented nationally by MSA EN
877:2000/A1:2006
Cast iron pipes and fittings, their joints and accessories for the
evacuation of water from buildings - Requirements, test methods
and quality assurance
EN 877:1999/A1:2006/AC:2008 as implemented nationally by
MSA EN 877:2000/A1:2006/AC:2008
Cast iron pipes and fittings, their joints and accessories for the
evacuation of water from buildings - Requirements, test methods
and quality assurance
EN 934-2:2009 as implemented nationally by MSA EN 934-
2:2009
Admixtures for concrete, mortar and grout - Part 2: Concrete
admixtures - Definitions, requirements, conformity, marking and
labeling
EN 934-3:2009 as implemented nationally by MSA EN 934-
3:2009
Admixtures for concrete, mortar and grout - Part 3: Admixtures for
masonry mortar - Definitions, requirements, conformity, marking
and labelling
EN 934-4:2009 as implemented nationally by MSA EN 934-
4:2009
Admixtures for concrete, mortar and grout - Part 4: Admixtures
for grout for prestressing tendons - Definitions, requirements,
conformity, marking and labelling
EN 934-5:2007 as implemented nationally by MSA EN 934-
5:2007
Admixtures for concrete, mortar and grout - Part 5: Admixtures for
sprayed concrete - Definitions, requirements, conformity, marking
and labeling
EN 969:2009 as implemented nationally by MSA EN 969:2009
Ductile iron pipes, fittings, accessories and their joints for gas
pipelines - Requirements and test methods
EN 997:2003 as implemented nationally by MSA EN 997:2003
WC pans and WC suites with integral trap
EN 997:2003/A1:2006 as implemented nationally by MSA EN
997:2003/A1:2007
WC pans and WC suites with integral trap
EN 998-1:2003 as implemented nationally by MSA EN 998-
1:2003
Specification for mortar for masonry - Part 1: Rendering and
plastering mortar
EN 998-1:2003/AC:2005 as implemented nationally by MSA
EN 998-1:2003/AC:2005
Specification for mortar for masonry - Part 1: Rendering and
plastering mortar
EN 998-2:2003 as implemented nationally by MSA EN 998-
2:2003
Specification for mortar for masonry - Part 2: Masonry mortar
EN 1020:2009 as implemented nationally by MSA EN
1020:2009
Non-domestic forced convection gas-fired air heaters for space
heating not exceeding a net heat input of 300 kW incorporating
a fan to assist transportation of combustion air or combustion
products
EN 1036-2:2008 as implemented nationally by MSA EN 1036-
2:2008
Glass in building - Mirrors from silver-coated float glass for
internal use - Part 2: Evaluation of conformity; product standard
EN 1051-2:2007 as implemented nationally by MSA EN 1051-
2:2007
Glass in building - Glass blocks and glass pavers - Part 2
Evaluation of conformity/Product standard
EN 1057:2006 as implemented nationally by MSA EN
1057:2006
Copper and copper alloys - Seamless, round copper tubes for water
and gas in sanitary and heating applications
EN 1096-4:2004 as implemented nationally by MSA EN 1096-
4:2004
Glass in building - Coated glass - Part 4: Evaluation of conformity/
Product standard
EN 1123-1:1999 as implemented nationally by MSA EN 1123-
1:2000
Pipes and fitting of longitudinally welded hot-dip galvanized steel
pipes with spigot and socket for waste water systems – Part 1
Requirements, testing, quality control
EN 1123-1:1999/A1:2004 as implemented nationally by MSA
EN 1123-1:2000/A1:2004
Pipes and fitting of longitudinally welded hot-dip galvanized steel
pipes with spigot and socket for waste water systems – Part 1
Requirements, testing, quality control
EN 1124-1:1999 as implemented nationally by MSA EN 1124-
1:2000
Pipes and fitting of longitudinally welded stainless steel pipes with
spigot and socket for waste water systems – Part 1: Requirements,
testing, quality control
EN 1124-1:1999/A1:2004 as implemented nationally by MSA
EN 1124-1:2000/A1:2004
Pipes and fitting of longitudinally welded stainless steel pipes with
spigot and socket for waste water systems – Part 1: Requirements,
testing, quality control
EN 1125:2008 as implemented nationally by MSA EN
1125:2008
Building hardware - Panic exit devices operated by a horizontal
bar, for use on escape routes - Requirements and test methods
EN 1154:1996 as implemented nationally by MSA EN
1154:2000
Building hardware - Controlled door closing devices -
Requirements and test methods
EN 1154:1996/A1:2002 as implemented nationally by MSA EN
1154:2000/A1:2003
Building hardware - Controlled door closing devices -
Requirements and test methods
EN 1154:1996/A1:2002/AC:2006 as implemented nationally by
MSA EN 1154:2000/A1:2003/AC:2006
Building hardware - Controlled door closing devices -
Requirements and test methods
EN 1155:1997 as implemented nationally by MSA EN
1155:2000
Building hardware - Electrically powered hold-open devices for
swing doors - Requirements and test methods
EN 1155:1997/A1:2002 as implemented nationally by MSA EN
1155:2000/A1:2003
Building hardware - Electrically powered hold-open devices for
swing doors - Requirements and test methods
EN 1155:1997/A1:2002/AC:2006 as implemented nationally by
MSA EN 1155:2000/A1:2003/AC:2006
Building hardware - Electrically powered hold-open devices for
swing doors - Requirements and test methods
EN 1158:1997 as implemented nationally by MSA EN
1158:2000
Building hardware - Door coordinator devices - Requirements and
test methods
EN 1158:1997/A1:2002 as implemented nationally by MSA EN
1158:2000/A1:2003
Building hardware - Door coordinator devices - Requirements and
test methods
EN 1158:1997/A1:2002/AC:2006 as implemented nationally by
MSA EN 1158:2000/A1:2003/AC:2006
Building hardware - Door coordinator devices - Requirements and
test methods
EN 1168:2005+A2:2009 as implemented nationally by MSA EN
1168:2005+A2:2009
Precast concrete products - Hollow core slabs
EN 1279-5:2005+A1:2008 as implemented nationally by MSA
EN 1279-5:2005+A1:2008
Glass in building - Insulating glass units - Part 5: Evaluation of
conformity
EN 1304:2005 as implemented nationally by MSA EN
1304:2005
Clay roofing tiles and fittings - Product definitions and
specifications
EN 1317-5:2007+A1:2008 as implemented nationally by MSA
EN 1317-5:2007+A1:2008
Road restraint systems - Part 5: Product requirements and
evaluation of conformity for vehicle restraint systems
EN 1319:2009 as implemented nationally by MSA EN
1319:2009
Domestic gas-fired forced convection air heaters for space heating,
with fan-assisted burners not exceeding a net heat input of 70 kW
EN 1337-3:2005 as implemented nationally by MSA EN 1337-
3:2005
Structural bearings - Part 3: Elastomeric bearings
EN 1337-4:2004 as implemented nationally by MSA EN 1337-
4:2004
Structural bearings – Part 4: Roller bearings
EN 1337-4:2004/AC:2007 as implemented nationally by MSA
EN 1337-4:2004/AC:2007
Structural bearings – Part 4: Roller bearings
EN 1337-5:2005 as implemented nationally by MSA EN 1337-
5:2005
Structural bearings - Part 5: Pot bearings
EN 1337-6:2004 as implemented nationally by MSA EN 1337-
6:2004
Structural bearings – Part 6: Rocker bearings
EN 1337-7:2004 as implemented nationally by MSA EN 1337-
7:2004
Structural bearings-Part 7: Spherical and cylindrical PTFE bearings
EN 1337-8:2007 implemented nationally by MSA EN 1337-
8:2007
Structural bearings - Part 8: Guide Bearings and Restraint Bearings
EN 1338:2003 as implemented nationally by MSA EN
1338:2003
Concrete paving blocks - Requirements and test methods
EN 1338:2003/AC:2006 as implemented nationally by MSA EN
1338:2003/AC:2006
Concrete paving blocks - Requirements and test methods
EN 1339:2003 as implemented nationally by MSA EN
1339:2003
Concrete paving flags – Requirements and test methods
EN 1339:2003/AC:2006 as implemented nationally by MSA EN
1339:2003/AC:2006
Concrete paving flags – Requirements and test methods
EN 1340:2003 as implemented nationally by MSA EN
1340:2003
Concrete kerb units – Requirements and test methods
EN 1340:2003/AC:2006 as implemented nationally by MSA EN
1340:2003/AC:2006
Concrete kerb units – Requirements and test methods
EN 1341:2001 as implemented nationally by MSA EN
1341:2002
Slabs of natural stone for external paving-Requirements and test
methods
EN 1342:2001 as implemented nationally by MSA EN
1342:2002
Setts of natural stone for external paving-Requirements and test
methods
EN 1343:2001 as implemented nationally by MSA EN
1343:2002
Kerbs of natural stone for external paving-Requirements and test
methods
EN 1344:2002 as implemented nationally by MSA EN
1344:2002
Clay pavers - Requirements and test methods
EN 1423:1997 as implemented nationally by MSA EN
1423:2000
Road marking materials – Drop on materials – Glass beads,
antiskid aggregates and mixtures of the two
EN 1423:1997/A1:2003 as implemented nationally by MSA EN
1423:2000/A1:2003
Road marking materials – Drop on materials – Glass beads,
antiskid aggregates and mixtures of the two
EN 1433:2002 as implemented nationally by MSA EN
1433:2003
Drainage channels for vehicular and pedestrian areas –
Classification, design and testing requirements, marking and
evaluation of conformity
EN 1433:2002/A1:2005 as implemented nationally by MSA EN
1433:2003/A1:2005
Drainage channels for vehicular and pedestrian areas –
Classification, design and testing requirements, marking and
evaluation of conformity
EN 1457:1999 as implemented nationally by MSA EN
1457:2000
Chimneys – Clay/ceramic flue liners – Requirements and test
methods
EN 1457:1999/A1:2002 as implemented nationally by MSA EN
1457:2000/A1:2002
Chimneys – Clay/ceramic flue liners – Requirements and test
methods
EN 1457:1999/AC:2006 as implemented nationally by MSA EN
1457:2000/AC:2006
Chimneys – Clay/ceramic flue liners – Requirements and test
methods
EN 1457:1999/A1:2002/AC:2007 as implemented nationally by
MSA EN 1457:2000/A1:2002/AC:2007
Chimneys – Clay/ceramic flue liners – Requirements and test
methods
EN 1463-1:2009 as implemented nationally by MSA EN 1463-
1:2009
Road marking materials - Retroflecting road studs - Part 1: Initial
performance requirements
EN 1469:2004 as implemented nationally by MSA EN
1469:2004
Natural stone products - Slabs for cladding – Requirements
EN 1504-2:2004 as implemented nationally by MSA EN 1504-
2:2004
Products and systems for the protection and repair of concrete
structures - Definitions, requirements, quality control and
evaluation of conformity - Part 2: Surface protection systems for
concrete
EN 1504-3:2005 as implemented nationally by MSA EN 1504-
3:2006
Products and systems for the protection and repair of concrete
structures - Definitions, requirements, quality control and
evaluation of conformity - Part 3: Structural and non-structural
repair
EN 1504-4:2004 as implemented nationally by MSA EN 1504-
4:2004
Products and systems for the protection and repair of concrete
structures - Definitions, requirements, quality control and
evaluation of conformity - Part 4: Structural bonding
EN 1504-5:2004 as implemented nationally by MSA EN 1504-
5:2004
Products and systems for the protection and repair of concrete
structures - Definitions, requirements, quality control and
evaluation of conformity - Part 5: Concrete injection
EN 1504-6:2006 as implemented nationally by MSA EN 1504-
6:2006
Products and systems for the protection and repair of concrete
structures - Definitions, requirements, quality control and
evaluation of conformity - Part 6: Anchoring of reinforcing steel
bar
EN 1504-7:2006 as implemented nationally by MSA EN 1504-
7:2006
Products and systems for the protection and repair of concrete
structures - Definitions, requirements, quality control and
evaluation of conformity - Part 7: Reinforcement corrosion
protection
EN 1520:2002 as implemented nationally by MSA EN
1520:2003
Prefabricated reinforced components of lightweight aggregate
concrete with open structure
EN 1520:2002/AC:2003 as implemented nationally by MSA EN
1520:2003/AC:2003
Prefabricated reinforced components of lightweight aggregate
concrete with open structure
EN 1748-1-2:2004 as implemented nationally by MSA EN 1748-
1-2:2004
Glass in building – Special basic products - Borosilicate glasses -
Part 1-2: Evaluation of conformity/Product standard
EN 1748-2-2:2004 as implemented nationally by MSA EN 1748-
2-2:2004
Glass in building – Special basic products - Glass ceramics - Part
2-2: Evaluation of conformity/Product standard
EN 1806:2006 as implemented nationally by MSA EN
1806:2006
Chimneys - Clay/ceramic flue blocks for single wall chimneys -
Requirements and test methods
EN 1825-1:2004 as implemented nationally by MSA EN 1825-
1:2004
Grease separators - Part 1: Principles of design, performance and
testing, marking and quality control
EN 1825-1:2004/AC:2006 as implemented nationally by MSA
EN 1825-1:2004/AC:2006
Grease separators - Part 1: Principles of design, performance and
testing, marking and quality control
EN 1856-1:2009 as implemented nationally by MSA EN 1856-
1:2009
Chimneys - Requirements for metal chimneys - Part 1: System
chimney products
EN 1856-2:2009 as implemented nationally by MSA EN 1856-
2:2009
Chimneys - Requirements for metal chimneys - Part 2: Metal liners
and connecting flue pipes
EN 1857:2003+A1:2008 as implemented nationally by MSA EN
1857:2003+A1:2008
Chimneys - Components - Concrete flue liners
EN 1858:2008 as implemented nationally by MSA EN
1858:2009
Chimneys - Components - Concrete flue blocks
EN 1863-2:2004 as implemented nationally by MSA EN 1863-
2:2004
Glass in building - Heat strengthened soda lime silicate glass - Part
2: Evaluation of conformity/Product standard
EN 1873:2005 as implemented nationally by MSA EN
1873:2006
Prefabricated accessories for roofing - Individual roof lights of
plastics - Product specification and test methods
EN 1916:2002 as implemented nationally by MSA EN
1916:2002
Concrete pipes and fittings, unreinforced, steel fibre and reinforced
EN 1916:2002/AC:2008 as implemented nationally by MSA EN
1916:2002/AC:2008
Concrete pipes and fittings, unreinforced, steel fibre and reinforced
EN 1917:2002 as implemented nationally by MSA EN
1917:2002
Concrete manholes and inspection chambers, unreinforced, steel
fibre and reinforced
EN 1917:2002/AC:2008 as implemented nationally by MSA EN
1917:2002/AC:2008
Concrete manholes and inspection chambers, unreinforced, steel
fibre and reinforced
EN 1935:2002 as implemented nationally by MSA EN
1935:2002
Building hardware-Single-axis hinges-Requirements and test
methods
EN 1935:2002/AC:2003 as implemented nationally by MSA EN
1935:2002/AC:2004
Building hardware-Single-axis hinges-Requirements and test
methods
EN 10025-1:2004 as implemented nationally by MSA EN
10025-1:2004
Hot rolled products of structural steels - Part 1: General technical
delivery conditions
EN 10088-4:2009 as implemented nationally by MSA EN
10088-4:2009
Stainless steels - Part 4: Technical delivery conditions for sheet/
plate and strip of corrosion resisting steels for construction
purposes
EN 10088-5:2009 as implemented nationally by MSA EN
10088-5:2009
Stainless steels - Part 5: Technical delivery conditions for bars,
rods, wire, sections and bright products of corrosion resisting steels
for construction purposes
EN 10210-1:2006 as implemented nationally by MSA EN
10210-1:2006
Hot finished structural hollow sections of non-alloy and fine grain
steels - Part 1: Technical delivery conditions
EN 10219-1:2006 as implemented nationally by MSA EN
10219-1:2006
Cold formed welded structural hollow sections of non-alloy and
fine grain steels - Part 1: Technical delivery conditions
EN 10224:2002 as implemented nationally by MSA EN
10224:2003
Non-alloy steel tubes and fittings for the conveyance of aqueous
liquids including water for human consumption - Technical
delivery conditions
EN 10224:2002/A1:2005 as implemented nationally by MSA
EN 10224:2003/A1:2005
Non-alloy steel tubes and fittings for the conveyance of aqueous
liquids including water for human consumption - Technical
delivery conditions
EN 10255:2004+A1:2007 as implemented nationally by MSA
EN 10255:2004+A1:2007
Non-Alloy steel tubes suitable for welding and threading -
Technical delivery conditions
EN 10311:2005 as implemented nationally by MSA EN
10311:2005
Joints for the connection of steel tubes and fittings for the
conveyance of water and other aqueous liquids
EN 10312:2002 as implemented nationally by MSA EN
10312:2003
Welded stainless steel tubes for the conveyance of aqueous liquids
including water for human consumption - Technical delivery
conditions
EN 10312:2002/A1:2005 as implemented nationally by MSA
EN 10312:2003/A1:2005
Welded stainless steel tubes for the conveyance of aqueous liquids
including water for human consumption - Technical delivery
conditions
EN 10340:2007 as implemented nationally by MSA EN
10340:2007
Steel casting for structural uses
EN 10340:2007/AC:2008 as implemented nationally by MSA
EN 10340:2007/AC:2008
Steel casting for structural uses
EN 10343:2009 as implemented nationally by MSA EN
10343:2009
Steels for quenching and tempering for construction purposes -
Technical delivery conditions
EN 12004:2007 as implemented nationally by MSA EN
12004:2007
Adhesives for tiles - Requirements, evaluation of conformity,
classification and designation
EN 12050-1:2001 as implemented nationally by MSA EN
12050-1:2001
Wastewater lifting plants for buildings and sites-Principles of
construction and testing-Part 1: Lifting plants for wastewater
containing faecal matter
EN 12050-2:2000 as implemented nationally by MSA EN
12050-2:2001
Wastewater lifting plants for buildings and sites-Principles of
construction and testing-Part 2: Lifting plants for faecal-free
wastewater
EN 12050-3:2000 as implemented nationally by MSA EN
12050-3:2001
Wastewater lifting plants for buildings and sites-Principles of
construction and testing-Part 3: Lifting plants for wastewater
containing faecal matter for limited applications
EN 12050-4:2000 as implemented nationally by MSA EN
12050-4:2000
Wastewater lifting plants for buildings and sites-Principles of
construction and testing-Part 4: Non-return valves for faecal-free
wastewater and wastewater containing faecal matter
EN 12057:2004 as implemented nationally by MSA EN
12057:2004
Natural stone products - Modular tiles – Requirements
EN 12058:2004 as implemented nationally by MSA EN
12058:2004
Natural stone products - Slabs for floors and stairs - Requirements
EN 12094-1:2003 as implemented nationally by MSA EN
12094-1:2003
Fixed firefighting systems – Components for gas extinguishing
systems – Part 1: Requirements and test methods for electrical
automatic control and delay devices
EN 12094-2:2003 as implemented nationally by MSA EN
12094-2:2003
Fixed firefighting systems – Components for gas extinguishing
systems – Part 2: Requirements and test methods for non-electrical
automatic control and delay devices
EN 12094-3:2003 as implemented nationally by MSA EN
12094-3:2003
Fixed firefighting systems – Components for gas extinguishing
systems – Part 3: Requirements and test methods for manual
triggering and stop devices
EN 12094-4:2004 as implemented nationally by MSA EN
12094-4:2004
Fixed firefighting systems - Components for gas extinguishing
systems - Part 4: Requirements and test methods for container
valve assemblies and their actuators
EN 12094-5:2006 as implemented nationally by MSA EN
12094-5:2006
Fixed firefighting systems - Components for gas extinguishing
systems - Part 5: Requirements and test methods for high and low
pressure selector valves and their actuators for CO2 systems
EN 12094-6:2006 as implemented nationally by MSA EN
12094-6:2006
Fixed firefighting systems - Components for gas extinguishing
systems - Part 6: Requirements and test methods for non-electrical
disable devices for CO2 systems
EN 12094-7:2000 as implemented nationally by MSA EN
12094-7:2001
Fixed firefighting systems - Components for gas extinguishing
systems - Part 7: Requirements and test methods for nozzles for
CO2 systems
EN 12094-7:2000/A1:2005 as implemented nationally by MSA
EN 12094-7:2001/A1:2005
Fixed firefighting systems - Components for gas extinguishing
systems - Part 7: Requirements and test methods for nozzles for
CO2 systems
EN 12094-8:2006 as implemented nationally by MSA EN
12094-8:2006
Fixed firefighting systems - Components for gas extinguishing
systems - Part 8: Requirements and test methods for connectors
EN 12094-9:2003 as implemented nationally by MSA EN
12094-9:2003
Fixed firefighting systems – Components for gas extinguishing
systems – Part 9: Requirements and test methods for special fire
detectors
EN 12094-10:2003 as implemented nationally by MSA EN
12094-10:2003
Fixed firefighting systems – Components for gas extinguishing
systems – Part 10: Requirements and test methods for pressure
gauges and pressure switches
EN 12094-11:2003 as implemented nationally by MSA EN
12094-11:2003
Fixed firefighting systems – Components for gas extinguishing
systems – Part 11: Requirements and test methods for mechanical
weighing devices
EN 12094-12:2003 as implemented nationally by MSA EN
12094-12:2003
Fixed firefighting systems – Components for gas extinguishing
systems – Part 12: Requirements and test methods for pneumatic
alarm devices
EN 12094-13:2001 as implemented nationally by MSA EN
12094-13:2001
Fixed firefighting systems - Components for gas extinguishing
systems - Part 13: Requirements and test methods for check valves
and non-return valves
EN 12094-13:2001/AC:2002 as implemented nationally by MSA
EN 12094-13:2001/AC:2002
Fixed firefighting systems - Components for gas extinguishing
systems - Part 13: Requirements and test methods for check valves
and non-return valves
EN 12101-1:2005 as implemented nationally by MSA EN
12101-1:2005
Smoke and heat control systems - Part 1: Specification for smoke
barriers
EN 12101-1:2005+A1:2006 as implemented nationally by MSA
EN 12101-1:2005+A1:2006
Smoke and heat control systems - Part 1: Specification for smoke
barriers
EN 12101-2:2003 as implemented nationally by MSA EN
12101-2:2003
Smoke and heat control systems - Part 2: Specification for
natural smoke and heat exhaust ventilators
EN 12101-3:2002 as implemented nationally by MSA EN
12101-3:2002
Smoke and heat control systems - Part 3: Specification for powered
smoke and heat exhaust ventilators
EN 12101-3:2002/AC:2005 as implemented nationally by MSA
EN 12101-3:2002/AC:2005
Smoke and heat control systems - Part 3: Specification for powered
smoke and heat exhaust ventilators
EN 12101-6:2005 as implemented nationally by MSA EN
12101-6:2005
Smoke and heat control systems - Part 6: Specification for pressure
differential systems – Kits
EN 12101-6:2005/AC:2006 as implemented nationally by MSA
EN 12101-6:2005/AC:2006
Smoke and heat control systems - Part 6: Specification for pressure
differential systems – Kits
EN 12101-10:2005 as implemented nationally by MSA EN
12101-10:2005
Smoke and heat control systems - Part 10: Power supplies
EN 12101-10:2005/AC:2007 as implemented nationally by
MSA EN 12101-10:2005/AC:2007
Smoke and heat control systems - Part 10: Power supplies
EN 12150-2:2004 as implemented nationally by MSA EN
12150-2:2004
Glass in building - Thermally toughened soda lime silicate safety
glass - Part 2: Evaluation of conformity/Product standard
EN 12209:2003 as implemented nationally by MSA EN
12209:2004
Building hardware – Locks and latches – Mechanically operated
locks, latches and locking plates – Requirements and test methods
EN 12209:2003/AC:2005 as implemented nationally by MSA
EN 12209:2004/AC:2006
Building hardware – Locks and latches – Mechanically operated
locks, latches and locking plates – Requirements and test methods
EN 12259-1:1999+A1:2001 as implemented nationally by MSA
EN 12259-1:2000+A1:2001
Fixed firefighting systems – Components for sprinkler and water
spray systems – Part 1: Sprinklers
EN 12259-1:1999+A1:2001/A2:2004 as implemented nationally
by MSA EN 12259-1:2000+A1:2001/A2:2004
Fixed firefighting systems – Components for sprinkler and water
spray systems – Part 1: Sprinklers
EN 12259-1:1999+A1:2001/A3:2006 as implemented nationally
by MSA EN 12259-1:2000+A1:2001/A3:2006
Fixed firefighting systems – Components for sprinkler and water
spray systems – Part 1: Sprinklers
EN 12259-2:1999 as implemented nationally by MSA EN
12259-2:2000
Fixed firefighting systems – Components for sprinkler and water
spray systems – Part 2: Wet alarm valve assemblies
EN 12259-2:1999/A1:2001 as implemented nationally by MSA
EN 12259-2:2000/A1:2001
Fixed firefighting systems – Components for sprinkler and water
spray systems – Part 2: Wet alarm valve assemblies
EN 12259-2:1999/A2:2005 as implemented nationally by MSA
EN 12259-2:2000/A2:2005
Fixed firefighting systems – Components for sprinkler and water
spray systems – Part 2: Wet alarm valve assemblies
EN 12259-2:1999/AC:2002 as implemented nationally by MSA
EN 12259-2:2000/AC:2002
Fixed firefighting systems – Components for sprinkler and water
spray systems – Part 2: Wet alarm valve assemblies
EN 12259-3:2000 as implemented nationally by MSA EN
12259-3:2000
Fixed firefighting systems - Components for automatic sprinkler
and water spray systems - Part 3: Dry alarm valve assemblies
EN 12259-3:2000/A1:2001 as implemented nationally by MSA
EN 12259-3:2000/A1:2001
Fixed firefighting systems - Components for automatic sprinkler
and water spray systems - Part 3: Dry alarm valve assemblies
EN 12259-3:2000/A2:2005 as implemented nationally by MSA
EN 12259-3:2000/A2:2005
Fixed firefighting systems - Components for automatic sprinkler
and water spray systems - Part 3: Dry alarm valve assemblies
EN 12259-4:2000 as implemented nationally by MSA EN
12259-4:2000
Fixed firefighting systems - Components for sprinkler and water
spray systems - Part 4: Water motor alarms
EN 12259-4:2000/A1:2001 as implemented nationally by MSA
EN 12259-4:2000/A1:2001
Fixed firefighting systems - Components for sprinkler and water
spray systems - Part 4: Water motor alarms
EN 12259-5:2002 as implemented nationally by MSA EN
12259-5:2002
Fixed firefighting systems – Components for sprinkler and water
spray systems – Part 5: Water flow detectors
EN 12271:2006 as implemented nationally by MSA EN
12271:2007
Surface dressing – Requirements
EN 12273:2008 as implemented nationally by MSA EN
12273:2008
Slurry surfacing – Requirements
EN 12285-2:2005 as implemented nationally by MSA EN
12285-2:2005
Workshop fabricated steel tanks - Part 2: Horizontal cylindrical
single skin and double skin tanks for the aboveground storage of
flammable and non-flammable water polluting liquids
EN 12326-1:2004 as implemented nationally by MSA EN
12326-1:2004
Slate and stone products for discontinuous roofing and cladding -
Part 1: Product specification
EN 12337-2:2004 as implemented nationally by MSA EN
12337-2:2004
Glass in building - Chemically strengthened soda lime silicate glass
- Part 2: Evaluation of conformity/Product standard
EN 12352:2006 as implemented nationally by MSA EN
12352:2006
Traffic control equipment - Warning and safety light devices
EN 12368:2006 as implemented nationally by MSA EN
12368:2006
Traffic control equipment - Signal heads
EN 12380:2002 as implemented nationally by MSA EN
12380:2003
Air admittance valves for drainage systems - Requirements, tests
methods and evaluation of conformity
EN 12446:2003 as implemented nationally by MSA EN
12446:2003
Chimneys - Components - Concrete outer wall elements
EN 12467:2004 as implemented nationally by MSA EN
12467:2005
Fibre-cement flat sheets - Product specification and test methods
EN 12467:2004/A1:2005 as implemented nationally by MSA
EN 12467:2005/A1:2005
Fibre-cement flat sheets - Product specification and test methods
EN 12467:2004/A2:2006 as implemented nationally by MSA
EN 12467:2005/A2:2006
Fibre-cement flat sheets - Product specification and test methods
EN 12566-1:2000 as implemented nationally by MSA EN
12566-1:2000
Small wastewater treatment systems for up to 50 PT – Part 1
Prefabricated septic tanks
EN 12566-1:2000/A1:2003 as implemented nationally by MSA
EN 12566-1:2000/A1:2004
Small wastewater treatment systems for up to 50 PT – Part 1
Prefabricated septic tanks
EN 12566-3:2005+A1:2009 as implemented nationally by MSA
EN 12566-3:2005+A1:2009
Small wastewater treatment systems for up to 50 PT - Part 3
Packaged and/or site assembled domestic wastewater treatment
plants
EN 12566-4:2007 as implemented nationally by MSA EN
12566-4:2007
Small wastewater treatment systems for up to 50 PT - Part 4: Septic
tanks assembled in situ from prefabricated kits
EN 12591:2009 as implemented nationally by MSA EN
12591:2009
Bitumen and bituminous binders - Specifications for paving grade
bitumen
EN 12620:2002+A1:2008 as implemented nationally by MSA
EN 12620:2002+A1:2008
Aggregates for concrete
EN 12676-1:2000 as implemented nationally by MSA EN
12676-1:2000
Anti-glare systems for roads – Part 1: Performance and
characteristics
EN 12676-1:2000/A1:2003 as implemented nationally by MSA
EN 12676-1:2000/A1:2003
Anti-glare systems for roads – Part 1: Performance and
characteristics
EN 12737:2004+A1:2007 as implemented nationally by MSA
EN 12737:2004+A1:2007
Precast concrete products - Floor slats for livestock
EN 12764:2004+A1:2008 as implemented nationally by MSA
EN 12764:2005+A1:2008
Sanitary appliances - Specification for whirlpool baths
EN 12794:2005+A1:2007 as implemented nationally by MSA
EN 12794:2005+A1:2007
Precast concrete products - Foundation piles
EN 12794:2005+A1:2007/AC:2008 as implemented nationally
by MSA EN 12794:2005+A1:2007/AC:2008
Precast concrete products - Foundation piles
EN 12809:2001as implemented nationally by MSA EN
12809:2001
Residential independent boilers fired by solid fuel – Nominal heat
output up to 50 kW – Requirements and test methods
EN 12809:2001/A1:2004 as implemented nationally by MSA
EN 12809:2001/A1:2004
Residential independent boilers fired by solid fuel – Nominal heat
output up to 50 kW – Requirements and test methods
EN 12809:2001/AC:2006 as implemented nationally by MSA
EN 12809:2001/AC:2006
Residential independent boilers fired by solid fuel – Nominal heat
output up to 50 kW – Requirements and test methods
EN 12809:2001/A1:2004/AC:2007 as implemented nationally
by MSA EN 12809:2001/A1:2004/AC:2007
Residential independent boilers fired by solid fuel – Nominal heat
output up to 50 kW – Requirements and test methods
EN 12815:2001 as implemented nationally by MSA EN
12815:2001
Residential cookers fired by solid fuel – Requirements and test
methods
EN 12815:2001/A1:2004 as implemented nationally by MSA
EN 12815:2001/A1:2004
Residential cookers fired by solid fuel – Requirements and test
methods
EN 12815:2001/A1:2004/AC:2006 as implemented nationally
by MSA EN 12815:2001/A1:2004/AC:2006
Residential cookers fired by solid fuel – Requirements and test
methods
EN 12815:2001/AC:2006 as implemented nationally by MSA
EN 12815:2001/AC:2006
Residential cookers fired by solid fuel – Requirements and test
methods
EN 12815:2001/A1:2004/AC:2007 as implemented nationally
by MSA EN 12815:2001/A1:2004/AC:2007
Residential cookers fired by solid fuel – Requirements and test
methods
EN 12839:2001 as implemented nationally by MSA EN
12839:2001
Precast concrete products - Elements for fences
EN 12843:2004 as implemented nationally by MSA EN
12843:2004
Precast concrete products - Masts and poles
EN 12859:2008 as implemented nationally by MSA EN
12859:2008
Gypsum blocks - Definitions, requirements and test methods
EN 12860:2001 as implemented nationally by MSA EN
12860:2001
Gypsum based adhesives for gypsum blocks - Definitions,
requirements and test methods
EN 12860:2001/AC:2002 as implemented nationally by MSA
EN 12860:2001/AC:2002
Gypsum based adhesives for gypsum blocks - Definitions,
requirements and test methods
EN 12878:2005 as implemented nationally by MSA EN
12878:2005
Pigments for the colouring of building materials based on cement
and/or lime - Specifications and methods of test
EN 12878:2005/AC:2006 as implemented nationally by MSA
EN 12878:2005/AC:2006
Pigments for the colouring of building materials based on cement
and/or lime - Specifications and methods of test
EN 12899-1:2007 as implemented nationally by MSA EN
12899-1:2007
Fixed, vertical road traffic signs - Part 1: Fixed signs
EN 12899-2:2007 as implemented nationally by MSA EN
12899-2:2007
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic
bollards (TTB)
EN 12899-3:2007 as implemented nationally by MSA EN
12899-3:2007
Fixed, vertical road traffic signs - Part 3: Delineator posts and
retroreflectors
EN 12951:2004 as implemented nationally by MSA EN
12951:2004
Prefabricated accessories for roofing - Permanently fixed roof
ladders - Product specification and test methods
EN 12966-1:2005+A1:2009 as implemented nationally by MSA
EN 12966-1:2005+A1:2009
Road vertical signs - Variable message traffic signs - Part 1
Product standard
EN 13024-2:2004 as implemented nationally by MSA EN
13024-2:2004
Glass in building - Thermally toughened borosilicate safety glass -
Part 2: Evaluation of conformity/Product standard
EN 13043:2002 as implemented nationally by MSA EN
13043:2002
Aggregates for bituminous mixtures and surface treatments for
roads, airfields and other trafficked areas
EN 13043:2002/AC:2004 as implemented nationally by MSA
EN 13043:2002/AC:2004
Aggregates for bituminous mixtures and surface treatments for
roads, airfields and other trafficked areas
EN 13055-1:2002 as implemented nationally by MSA EN
13055-1:2002
Lightweight aggregates - Part 1: Lightweight aggregates for
concrete, mortar and grout
EN 13055-1:2002/AC:2004 as implemented nationally by MSA
EN 13055-1:2002/AC:2004
Lightweight aggregates - Part 1: Lightweight aggregates for
concrete, mortar and grout
EN 13055-2:2004 as implemented nationally by MSA EN
13055-2:2004
Lightweight aggregates – Part 2: Lightweight aggregates for
bituminous mixtures and surface treatments and for unbound and
bound applications
EN 13063-1:2005+A1:2007 as implemented nationally by MSA
EN 13063-1:2006+A1:2007
Chimneys - System chimneys with clay/ceramic flue liners - Part 1
Requirements and test methods for sootfire resistance
EN 13063-2:2005+A1:2007 as implemented nationally by MSA
EN 13063-2:2005+A1:2007
Chimneys - System chimneys with clay/ceramic flue liners - Part 2
Requirements and test methods under wet conditions
EN 13063-3:2007 as implemented nationally by MSA EN
13063-3:2007
Chimneys - System chimneys with clay/ceramic flue liners - Part 3
Requirements and test methods for air flue system chimneys
EN 13069:2005 as implemented nationally by MSA EN
13069:2005
Chimneys - Clay/ceramic outer walls for system chimneys -
Requirements and test methods
EN 13084-5:2005 as implemented nationally by MSA EN
13084-5:2005
Free-standing chimneys - Part 5: Material for brick liners - Product
specifications
EN 13084-5:2005/AC:2006 as implemented nationally by MSA
EN 13084-5:2005/AC:2006
Free-standing chimneys - Part 5: Material for brick liners - Product
specifications
EN 13084-7:2005 as implemented nationally by MSA EN
13084-7:2005
Free-standing chimneys - Part 7: Product specifications of
cylindrical steel fabrications for use in single wall steel chimneys
and steel liners
EN 13084-7:2005/AC:2009 as implemented nationally by MSA
EN 13084-7:2005/AC:2009
Free-standing chimneys - Part 7: Product specifications of
cylindrical steel fabrications for use in single wall steel chimneys
and steel liners
EN 13101:2002 as implemented nationally by MSA EN
13101:2002
Steps for underground man entry chambers - Requirements,
marking, testing and evaluation of conformity
EN 13108-1:2006 as implemented nationally by MSA EN
13108-1:2006
Bituminous mixtures - Material specifications - Part 1: Asphalt
Concrete
EN 13108-1:2006/AC:2008 as implemented nationally by MSA
EN 13108-1:2006/AC:2008
Bituminous mixtures - Material specifications - Part 1: Asphalt
Concrete
EN 13108-2:2006 as implemented nationally by MSA EN
13108-2:2006
Bituminous mixtures - Material specifications - Part 2: Asphalt
Concrete for very thin layers
EN 13108-2:2006/AC:2008 as implemented nationally by MSA
EN 13108-2:2006/AC:2008
Bituminous mixtures - Material specifications - Part 2: Asphalt
Concrete for very thin layers
EN 13108-3:2006 as implemented nationally by MSA EN
13108-3:2006
Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
EN 13108-3:2006/AC:2008 as implemented nationally by MSA
EN 13108-3:2006/AC:2008
Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
EN 13108-4:2006 as implemented nationally by MSA EN
13108-4:2006
Bituminous mixtures - Material specifications - Part 4: Hot Rolled
Asphalt
EN 13108-4:2006/AC:2008 as implemented nationally by MSA
EN 13108-4:2006/AC:2008
Bituminous mixtures - Material specifications - Part 4: Hot Rolled
Asphalt
EN 13108-5:2006 as implemented nationally by MSA EN
13108-5:2006
Bituminous mixtures - Material specifications - Part 5: Stone
Mastic Asphalt
EN 13108-5:2006/AC:2008 as implemented nationally by MSA
EN 13108-5:2006/AC:2008
Bituminous mixtures - Material specifications - Part 5: Stone
Mastic Asphalt
EN 13108-6:2006 as implemented nationally by MSA EN
13108-6:2006
Bituminous mixtures - Material specifications - Part 6: Mastic
Asphalt
EN 13108-6:2006/AC:2008 as implemented nationally by MSA
EN 13108-6:2006/AC:2008
Bituminous mixtures - Material specifications - Part 6: Mastic
Asphalt
EN 13108-7:2006 as implemented nationally by MSA EN
13108-7:2006
Bituminous mixtures - Material specifications - Part 7: Porous
Asphalt
EN 13108-7:2006/AC:2008 as implemented nationally by MSA
EN 13108-7:2006/AC:2008
Bituminous mixtures - Material specifications - Part 7: Porous
Asphalt
EN 13139:2002 as implemented nationally by MSA EN
13139:2002
Aggregates for mortar
EN 13139:2002/AC:2004 as implemented nationally by MSA
EN 13139:2002/AC:2004
Aggregates for mortar
EN 13160-1:2003 as implemented nationally by MSA EN
13160-1:2003
Leak detection systems - Part 1: General principles
EN 13162:2008 as implemented nationally by MSA EN
13162:2008
Thermal insulation products for buildings - Factory made mineral
wool (MW) products - Specification
EN 13163:2008 as implemented nationally by MSA EN
13163:2008
Thermal insulation products for buildings - Factory made products
of expanded polystyrene (EPS) - Specification
EN 13164:2008 as implemented nationally by MSA 13164:2008
Thermal insulation products for buildings - Factory made products
of extruded polystyrene foam (XPS) – Specification
EN 13165:2008 as implemented nationally by MSA EN
13165:2008
Thermal insulation products for buildings - Factory made rigid
polyurethane foam (PUR) products - Specification
EN 13166:2008 as implemented nationally by MSA EN
13166:2008
Thermal insulation products for buildings - Factory made products
pf phenolic foam (PF) - Specification
EN 13167:2008 as implemented nationally by MSA EN
13167:2008
Thermal insulation products for buildings - Factory made products
pf phenolic foam (PF) – Specification
EN 13168:2008 as implemented nationally by MSA EN
13168:2008
Thermal insulation products for buildings - Factory made wood
wool (WW) products - Specification
EN 13169:2008 as implemented nationally by MSA EN
13169:2008
Thermal insulation products for buildings - Factory made products
of expanded perlite (EPB) – Specification
EN 13170:2008 as implemented nationally by MSA EN
13170:2008
Thermal insulation products for buildings-Factory made products
of expanded cork (ICB)-Specification
EN 13171:2008 as implemented nationally by MSA EN
13171:2008
Thermal insulation products for buildings - Factory made wood
fibre (WF) products – Specification
EN 13224:2004 as implemented nationally by MSA EN
13224:2004
Precast concrete products – Ribbed floor elements
EN 13224:2004+A1:2007 as implemented nationally by MSA
EN 13224:2004+A1:2007
Precast concrete products – Ribbed floor elements
EN 13225:2004 as implemented nationally by MSA EN
13225:2004
Precast concrete products - Linear structural elements
EN 13225:2004/AC:2006 as implemented nationally by MSA
EN 13225:2004/AC:2007
Precast concrete products - Linear structural elements
EN 13229:2001 as implemented nationally by MSA EN
13229:2001
Inset appliances including open fires fired by solid fuels –
Requirements and test methods
EN 13229:2001/A1:2003 as implemented nationally by MSA
EN 13229:2001/A1:2003
Inset appliances including open fires fired by solid fuels –
Requirements and test methods
EN 13229:2001/A2:2004 as implemented nationally by MSA
EN 13229:2001/A2:2004
Inset appliances including open fires fired by solid fuels –
Requirements and test methods
EN 13229:2001/A2:2004/AC:2006 as implemented nationally
by MSA EN 13229:2001/A2:2004/AC:2006
Inset appliances including open fires fired by solid fuels –
Requirements and test methods
EN 13229:2001/AC:2006 as implemented nationally by MSA
EN 13229:2001/AC:2006
Inset appliances including open fires fired by solid fuels –
Requirements and test methods
EN 13229:2001/A2:2004/AC:2007 as implemented nationally
by MSA EN 13229:2001/A2:2004/AC:2007
Inset appliances including open fires fired by solid fuels –
Requirements and test methods
EN 13240:2001as implemented nationally by MSA EN
13240:2001
Room heaters fired by solid fuel – Requirement and test methods
EN 13240:2001/A2:2004 as implemented nationally by MSA
EN 13240:2001/A2:2004
Room heaters fired by solid fuel – Requirement and test methods
EN 13240:2001/AC:2006 as implemented nationally by MSA
EN 13240:2001/AC:2006
Room heaters fired by solid fuel – Requirement and test methods
EN 13240:2001/A2:2004/AC:2006 as implemented nationally
by MSA EN 13240:2001/A2:2004/AC:2006
Room heaters fired by solid fuel – Requirement and test methods
EN 13240:2001/A2:2004/AC:2007 as implemented nationally
by MSA EN 13240:2001/A2:2004/AC:2007
Room heaters fired by solid fuel – Requirement and test methods
EN 13241-1:2003 as implemented nationally by MSA EN
13241-1:2003
Industrial, commercial and garage doors and gates - Product
standard - Part 1: Products without fire resistance or smoke control
characteristics
EN 13242:2002+A1:2007 as implemented nationally by MSA
EN 13242:2003+A1:2007
Aggregates for unbound and hydraulically bound materials for use
in civil engineering work and road construction
EN 13249:2000 as implemented nationally by MSA EN
13249:2000
Geotextiles and geotextile-related products -Characteristics
required for use in the construction of roads and other trafficked
areas (excluding railways and asphalt inclusion)
EN 13249:2000/A1:2005 as implemented nationally by MSA
EN 13249:2000/A1:2005
Geotextiles and geotextile-related products -Characteristics
required for use in the construction of roads and other trafficked
areas (excluding railways and asphalt inclusion)
EN 13250:2000 as implemented nationally by MSA EN
13250:2000
Required characteristics for geotextiles and geotextile-related
products used in the construction of railways
EN 13250:2000/A1:2005 as implemented nationally by MSA
EN 13250:2000/A1:2005
Required characteristics for geotextiles and geotextile-related
products used in the construction of railways
EN 13251:2000 as implemented nationally by MSA EN
13251:2000
Geotextiles and geotextile-related products-Characteristics required
for use in earthworks, foundations and retaining structures
EN 13251:2000/A1:2005 as implemented nationally by MSA
EN 13251:2000/A1:2005
Geotextiles and geotextile-related products-Characteristics required
for use in earthworks, foundations and retaining structures
EN 13252:2000 as implemented nationally by MSA EN
13252:2000
Geotextiles and geotextile-related products-Characteristics required
for use in drainage systems
EN 13252:2000/A1:2005 as implemented nationally by MSA
EN 13252:2000/A1:2005
Geotextiles and geotextile-related products-Characteristics required
for use in drainage systems
EN 13253:2000 as implemented nationally by MSA EN
13253:2000
Geotextiles and geotextile-related products - Characteristics
required for use in erosion control works (coastal protection, bank
revetments)
EN 13253:2000/A1:2005 as implemented nationally by MSA
EN 13253:2000/A1:2005
Geotextiles and geotextile-related products - Characteristics
required for use in erosion control works (coastal protection, bank
revetments)
EN 13254:2000 as implemented nationally by MSA EN
13254:2000
Geotextiles and geotextile related products-Characteristics required
for use in the construction of reservoirs and dams
EN 13254:2000/A1:2005 as implemented nationally by MSA
EN 13254:2000/A1:2005
Geotextiles and geotextile related products-Characteristics required
for use in the construction of reservoirs and dams
EN 13254:2000/AC:2003 as implemented nationally by MSA
EN 13254:2000/AC:2003
Geotextiles and geotextile related products-Characteristics required
for use in the construction of reservoirs and dams
EN 13255:2000 as implemented nationally by MSA EN
13255:2000
Geotextiles and geotextile-related products-Characteristics required
for use in the construction of canals
EN 13255:2000/A1:2005 as implemented nationally by MSA
EN 13255:2000/A1:2005
Geotextiles and geotextile-related products-Characteristics required
for use in the construction of canals
EN 13255:2000/AC:2003 as implemented nationally by MSA
EN 13255:2000/AC:2003
Geotextiles and geotextile-related products-Characteristics required
for use in the construction of canals
EN 13256:2000 as implemented nationally by MSA EN
13256:2001
Geotextiles and geotextile-related products-Characteristics required
for use in the construction of tunnels and underground structures
EN 13256:2000/A1:2005 as implemented nationally by MSA
EN 13256:2001/A1:2005
Geotextiles and geotextile-related products-Characteristics required
for use in the construction of tunnels and underground structures
EN 13256:2000/AC:2003 as implemented nationally by MSA
EN 13256:2001/AC:2003
Geotextiles and geotextile-related products-Characteristics required
for use in the construction of tunnels and underground structures
EN 13257:2000 as implemented nationally by MSA EN
13257:2001
Geotextiles and geotextile-related products - Characteristics
required for use in solid waste disposals
EN 13257:2000/A1:2005 as implemented nationally by MSA
EN 13257:2001/A1:2005
Geotextiles and geotextile-related products - Characteristics
required for use in solid waste disposals
EN 13257:2000/AC:2003 as implemented nationally by MSA
EN 13257:2001/AC:2003
Geotextiles and geotextile-related products - Characteristics
required for use in solid waste disposals
EN 13263-1:2005+A1:2009 as implemented nationally by MSA
EN 13263-1:2005+A1:2009
Silica fume for concrete - Part 1: Definitions, requirements and
conformity criteria
EN 13265:2000 as implemented nationally by MSA EN
13265:2001
Geotextiles and geotextile-related products - Characteristics
required for use in liquid waste containment projects
EN 13265:2000/A1:2005 as implemented nationally by MSA
EN 13265:2001/A1:2005
Geotextiles and geotextile-related products - Characteristics
required for use in liquid waste containment projects
EN 13265:2000/AC:2003 as implemented nationally by MSA
EN 13265:2001/AC:2003
Geotextiles and geotextile-related products - Characteristics
required for use in liquid waste containment projects
EN 13279-1:2008 as implemented nationally by MSA EN
13279-1:2008
Gypsum binders and gypsum plasters - Part 1: Definitions and
requirements
EN 13310:2003 as implemented nationally by MSA EN
13310:2003
Kitchen sinks - Functional requirements and test methods
EN 13341:2005 as implemented nationally by MSA EN
13341:2005
Thermoplastics static tanks for above ground storage of
domestic heating oils, kerosene and diesel fuels - Blow moulded
polyethylene, rotationally moulded polyethylene and polyamide 6
by anionic polymerization tanks - Requirements and test methods
EN 13361:2004 as implemented nationally by MSA EN
13361:2004
Geosynthetic barriers - Characteristics required for use in the
construction of reservoirs and dams
EN 13361:2004/A1:2006 as implemented nationally by MSA
EN 13361:2004/A1:2006
Geosynthetic barriers - Characteristics required for use in the
construction of reservoirs and dams
EN 13362:2005 as implemented nationally by MSA EN
13362:2005
Geosynthetic Barriers - Characteristics required for use in the
construction of canals
EN 13383-1:2002 as implemented nationally by MSA EN
13383-1:2002
Armourstone - Part 1: Specification
EN 13383-1:2002/AC:2004 as implemented nationally by MSA
EN 13383-1:2002/AC:2004
Armourstone - Part 1: Specification
EN 13407:2006 as implemented nationally by MSA EN
13407:2006
Wall-hung urinals - Functional requirements and test methods
EN 13450:2002 as implemented nationally by MSA EN
13450:2003
Aggregates for railway ballast
EN 13450:2002/AC:2004 as implemented nationally by MSA
EN 13450:2003/AC:2004
Aggregates for railway ballast
EN 13454-1:2004 as implemented nationally by MSA EN
13454-1:2004
Binders, composite binders and factory made mixtures for
floor screeds based on calcium sulfate - Part 1: Definitions and
requirements
EN 13479:2004 as implemented nationally by MSA EN
13479:2005
Welding consumables - General product standard for filler metals
and fluxes for fusion welding of metallic materials
EN 13491:2004 as implemented nationally by MSA EN
13491:2004
Geosynthetic barriers - Characteristics required for use as a fluid
barrier in the construction of tunnels and underground structures
EN 13491:2004/A1:2006 as implemented nationally by MSA
EN 13491:2004/A1:2006
Geosynthetic barriers - Characteristics required for use as a fluid
barrier in the construction of tunnels and underground structures
EN 13492:2004 as implemented nationally by MSA EN
13492:2004
Geosynthetic barriers - Characteristics required for use in the
construction of liquid waste disposal sites, transfer stations or
secondary containment
EN 13492:2004/A1:2006 as implemented nationally by MSA
EN 13492:2004/A1:2006
Geosynthetic barriers - Characteristics required for use in the
construction of liquid waste disposal sites, transfer stations or
secondary containment
EN 13493:2005 as implemented nationally by MSA EN
13493:2005
Geosynthetic barriers - Characteristics required for use in the
construction of solid waste storage and disposal sites
EN 13502:2002 as implemented nationally by MSA EN
13502:2002
Chimneys - Requirements and test methods for clay/ceramic flue
terminals
EN 13561:2004+A1:2008 as implemented nationally by MSA
EN 13561:2004+A1:2008
External blinds – Performance requirements including safety
EN 13564-1:2002 as implemented nationally by MSA EN
13564-1:2002
Anti-flooding devices for buildings - Part 1: Requirements
EN 13616:2004 as implemented nationally by MSA EN
13616:2004
Overfill prevention devices for static tanks for liquid petroleum
fuels
EN 13616:2004/AC:2006 as implemented nationally by MSA
EN 13616:2004/AC:2006
Overfill prevention devices for static tanks for liquid petroleum
fuels
EN 13658-1:2005 as implemented nationally by MSA EN
13658-1:2005
Metal lath and beads - Definitions, requirements and test methods -
Part 1: Internal plastering
EN 13658-2:2005 as implemented nationally by MSA EN
13658-2:2005
Metal lath and beads - Definitions, requirements and test methods -
Part 2: External rendering
EN 13659:2004+A1:2008 as implemented nationally by MSA
EN 13659:2004+A1:2008
Shutters – Performance requirements including safety
EN 13693:2004+A1:2009 as implemented nationally by MSA
EN 13693:2004+A1:2009
Precast concrete products - Special roof elements
EN 13707:2004+A2:2009 as implemented nationally by MSA
EN 13707:2004+A2:2009
Flexible sheets for waterproofing - Reinforced bitumen sheets for
roof waterproofing - Definitions and characteristics
EN 13747:2005+A1:2008 as implemented nationally by MSA
EN 13747:2005+A1:2008
Precast concrete products - Floor plates for floor systems
EN 13748-1:2004 as implemented nationally by MSA EN
13748-1:2004
Terrazzo tiles – Part 1: Terrazzo tiles for internal use
EN 13748-1:2004/A1:2005 as implemented nationally by MSA
EN 13748-1:2004/A1:2005
Terrazzo tiles – Part 1: Terrazzo tiles for internal use
EN 13748-1:2004/AC:2005 as implemented nationally by MSA
EN 13748-1:2004/AC:2005
Terrazzo tiles – Part 1: Terrazzo tiles for internal use
EN 13748-2:2004 as implemented nationally by MSA EN
13748-2:2004
Screed materials and floor screeds – Screed material – Properties
and requirements
EN 13808:2005 as implemented nationally by MSA EN
13808:2005
Bitumen and bituminous binders - Framework for specifying
cationic bituminous emulsions
EN 13813:2002 as implemented nationally by MSA EN
13813:2002
Screed material and floor screeds - Screed material - Properties and
requirements
EN 13815:2006 as implemented nationally by MSA EN
13815:2006
Fibrous gypsum plaster casts - Definitions, requirements and test
methods
EN 13830:2003 as implemented nationally by MSA EN
13830:2003
Curtain walling – Product standard
EN 13859-1:2005+A1:2008 as implemented nationally by MSA
EN 13859-1:2005+A1:2008
Flexible sheets for waterproofing - Definitions and characteristics
of underlays - Part 1: Underlays for discontinuous roofing
EN 13859-2:2004+A1:2008 as implemented nationally by MSA
EN 13859-2:2005+A1:2008
Flexible sheets for waterproofing - Definitions and characteristics
of underlays - Part 2: Underlays for walls
EN 13877-3:2004 as implemented nationally by MSA EN
13877-3:2005
Concrete pavements - Part 3: Specifications for dowels to be used
in concrete pavements
EN 13915:2007 as implemented nationally by MSA EN
13915:2007
Prefabricated gypsum plasterboard panels with a cellular
paperboard core - Definitions, requirements and test methods
EN 13924:2006 as implemented nationally by MSA EN
13924:2006
Bitumen and bituminous binders - Specifications for hard paving
grade bitumens
EN 13924:2006/AC:2006 as implemented nationally by MSA
EN 13924:2006/AC:2006
Bitumen and bituminous binders - Specifications for hard paving
grade bitumens
EN 13950:2005 as implemented nationally by MSA EN
13950:2005
Gypsum plasterboard thermal/acoustic insulation composite panels
- Definitions, requirements and test methods
EN 13956:2005 as implemented nationally by MSA EN
13956:2005
Flexible sheet for waterproofing - Plastic and rubber sheets for roof
waterproofing - Definitions and characteristics
EN 13956:2005/AC:2006 as implemented nationally by MSA
EN 13956:2005/AC:2006
Flexible sheet for waterproofing - Plastic and rubber sheets for roof
waterproofing - Definitions and characteristics
EN 13963:2005 as implemented nationally by MSA EN
13963:2005
Jointing materials for gypsum plasterboards - Definitions,
requirements and test methods
EN 13963:2005/AC:2006 as implemented nationally by MSA
EN 13963:2005/AC:2006
Jointing materials for gypsum plasterboards - Definitions,
requirements and test methods
EN 13964:2004 as implemented nationally by MSA EN
13964:2004
Suspended ceilings - Requirements and test methods
EN 13964:2004/A1:2006 as implemented nationally by MSA
EN 13964:2004/A1:2006
Suspended ceilings - Requirements and test methods
EN 13967:2004 as implemented nationally by MSA EN
13967:2005
Flexible sheets for waterproofing - Plastic and rubber damp proof
sheets including plastic and rubber basement tanking sheet -
Definitions and characteristics
EN 13967:2004/A1:2006 as implemented nationally by MSA
EN 13967:2005/A1:2006
Flexible sheets for waterproofing - Plastic and rubber damp proof
sheets including plastic and rubber basement tanking sheet -
Definitions and characteristics
EN 13969:2004 as implemented nationally by MSA EN
13969:2005
Flexible sheets for waterproofing - Bitumen damp proof sheets
including bitumen basement tanking sheets - Definitions and
characteristics
EN 13969:2004/A1:2006 as implemented nationally by MSA
EN 13969:2005/A1:2006
Flexible sheets for waterproofing - Bitumen damp proof sheets
including bitumen basement tanking sheets - Definitions and
characteristics
EN 13970:2004 as implemented nationally by MSA EN
13970:2005
Flexible sheets for waterproofing - Bitumen water vapour control
layers - Definitions and characteristics
EN 13970:2004/A1:2006 as implemented nationally by MSA
EN 13970:2005/A1:2006
Flexible sheets for waterproofing - Bitumen water vapour control
layers - Definitions and characteristics
EN 13978-1:2005 as implemented nationally by MSA EN
13978-1:2005
Precast concrete products - Precast concrete garages - Part 1
Requirements for reinforced garages monolithic or consisting of
single sections with room dimensions
EN 13984:2004 as implemented nationally by MSA EN
13984:2005
Flexible sheets for waterproofing - Plastic and rubber vapour
control layers - Definitions and characteristics
EN 13984:2004/A1:2006 as implemented nationally by MSA
EN 13984:2005/A1:2006
Flexible sheets for waterproofing - Plastic and rubber vapour
control layers - Definitions and characteristics
EN 13986:2004 as implemented nationally by MSA EN
13986:2004
Wood-based panels for use in construction - Characteristics,
evaluation of conformity and marking
EN 14016-1:2004 as implemented nationally by MSA EN
14016-1:2004
Binders for magnesite screeds – Caustic magnesia and magnesium
chloride – Part 1: Definitions, requirements
EN 14037-1:2003 as implemented nationally by MSA EN
14037-1:2003
Ceiling mounted radiant panels supplied with water at temperature
below 120 °C - Part 1: Technical specifications and requirements
EN 14041:2004 as implemented nationally by MSA EN
14041:2004
Resilient, textile and laminate floor coverings – Essential
characteristics
EN 14041:2004/AC:2006 as implemented nationally by MSA
EN 14041:2004/AC:2006
Resilient, textile and laminate floor coverings – Essential
characteristics
EN 14063-1:2004 as implemented nationally by MSA EN
14063-1:2004
Thermal insulation materials and products – In-situ formed
expanded clay lightweight aggregate products (LWA) – Part 1
Specification for the loose-fill products before installation
EN 14063-1:2004/AC:2006 as implemented nationally by MSA
EN 14063-1:2004/AC:2007
Thermal insulation materials and products – In-situ formed
expanded clay lightweight aggregate products (LWA) – Part 1
Specification for the loose-fill products before installation
EN 14080:2005 as implemented nationally by MSA EN
14080:2005
Timber structures - Glued laminated timber – Requirements
EN 14081-1:2005 as implemented nationally by MSA EN
14081-1:2005
Timber structures - Strength graded structural timber with
rectangular cross section - Part 1: General requirements
EN 14178-2:2004 as implemented nationally by MSA EN
14178-2:2004
Glass in building - Basic alkaline earth silicate glass products - Part
2: Evaluation of conformity/Product standard
EN 14179-2:2005 as implemented nationally by MSA EN
14179-2:2005
Glass in building - Heat soaked thermally toughened soda lime
silicate safety glass - Part 2: Evaluation of conformity/Product
standard
EN 14188-1:2004 as implemented nationally by MSA EN
14188-1:2004
Joint fillers and sealants - Part 1: Specifications for hot applied
sealants
EN 14188-2:2004 as implemented nationally by MSA EN
14188-2:2005
Joint fillers and sealants - Part 2: Specifications for cold applied
sealants
EN 14188-3:2006 as implemented nationally by MSA EN
14188-3:2006
Joint fillers and sealants - Part 3: Specifications for preformed joint
seals
EN 14190:2005 as implemented nationally by MSA EN
14190:2005
Gypsum plasterboard products from reprocessing - Definitions,
requirements and test methods
EN 14195:2005 as implemented nationally by MSA EN
14195:2005
Metal framing components for gypsum plasterboard systems -
Definitions, requirements and test methods
EN 14195:2005/AC:2006 as implemented nationally by MSA
EN 14195:2005/AC:2006
Metal framing components for gypsum plasterboard systems -
Definitions, requirements and test methods
EN 14209:2005 as implemented nationally by MSA EN
14209:2005
Preformed plasterboard cornices - Definitions, requirements and
test methods
EN 14216:2004 as implemented nationally by MSA EN
14216:2004
Cement – Composition, specifications and conformity criteria for
very low heat special cements
EN 14246:2006 as implemented nationally by MSA EN
14246:2006
Gypsum elements for suspended ceilings - Definitions,
requirements and test methods
EN 14246:2006/AC:2007 as implemented nationally by MSA
EN 14246:2006/AC:2007
Gypsum elements for suspended ceilings - Definitions,
requirements and test methods
EN 14250:2004 as implemented nationally by MSA EN
14250:2004
Timber structures - Product requirements for prefabricated
structural members assembled with punched metal plate fasteners
EN 14296:2005 as implemented nationally by MSA EN
14296:2005
Sanitary appliances - Communal washing troughs
EN 14303:2009 as implemented nationally by MSA EN
14303:2009
Thermal insulation products for building equipment and industrial
installations - Factory made mineral wool (MW) products –
Specification
EN 14304:2009 as implemented nationally by MSA EN
14304:2009
Thermal insulation products for building equipment and industrial
installations - Factory made flexible elastomeric foam (FEF)
products – Specification
EN 14305:2009 as implemented nationally by MSA EN
14305:2009
Thermal insulation products for building equipment and industrial
installations - Factory made cellular glass (CG) products –
Specification
EN 14306:2009 as implemented nationally by MSA EN
14306:2009
Thermal insulation products for building equipment and industrial
installations - Factory made calcium silicate (CS) products –
Specification
EN 14307:2009 as implemented nationally by MSA EN
14307:2009
Thermal insulation products for building equipment and industrial
installations - Factory made extruded polystyrene foam (XPS)
products – Specification
EN 14308:2009 as implemented nationally by MSA EN
14308:2009
Thermal insulation products for building equipment and industrial
installations - Factory made rigid polyurethane foam (PUR) and
polyisocyanurate foam (PIR) products – Specification
EN 14309:2009 as implemented nationally by MSA EN
14309:2009
Thermal insulation products for building equipment and industrial
installations - Factory made products of expanded polystyrene
(EPS) – Specification
EN 14313:2009 as implemented nationally by MSA EN
14313:2009
Thermal insulation products for building equipment and industrial
installations - Factory made polyethylene foam (PEF) products -
Specification
EN 14314:2009 as implemented nationally by MSA EN
14314:2009
Thermal insulation products for building equipment and industrial
installations - Factory made phenolic foam (PF) products –
Specification
EN 14316-1:2004 as implemented nationally by MSA EN
14316-1:2004
Thermal insulation products for buildings - In-situ thermal
insulation formed from expanded perlite (EP) products - Part 1
Specification for bonded and loose-fill products before installation
EN 14317-1:2004 as implemented nationally by MSA EN
14317-1:2004
Thermal insulation products for buildings – In-situ thermal
insulation formed from exfoliated vermiculite (EV) products
– Part 1: Specification for bonded and loose-fill products before
installation
EN 14321-2:2005 as implemented nationally by MSA EN
14321-2:2005
Glass in building - Thermally toughened alkaline earth silicate
safety glass - Part 2: Evaluation of conformity/Product standard
EN 14339:2005 as implemented nationally by MSA EN
14339:2005
Underground fire hydrants
EN 14342:2005+A1:2008 as implemented nationally by MSA
EN 14342:2005+A1:2008
Wood flooring - Characteristics, evaluation of conformity and
marking
EN 14351-1:2006 as implemented nationally by MSA EN
14351-1:2006
Windows and doors - Product standard, performance characteristics
- Part 1: Windows and external pedestrian doorsets without
resistance to fire and/or smoke leakage characteristics
EN 14353:2007 as implemented nationally by MSA EN
14353:2008
Metal beads and feature profiles for use with gypsum plasterboards
- Definitions, requirements and test methods
EN 14374:2004 as implemented nationally by MSA EN
14374:2004
Timber structures - Structural laminated veneer lumber –
Requirements
EN 14384:2005 as implemented nationally by MSA EN
14384:2005
Pillar fire hydrants
EN 14388:2005 as implemented nationally by MSA EN
14388:2005
Road traffic noise reducing devices – Specifications
EN 14388:2005/AC:2008 as implemented nationally by MSA
EN 14388:2005/AC:2008
Road traffic noise reducing devices – Specifications
EN 14396:2004 as implemented nationally by MSA EN
14396:2004
Fixed ladders for manholes
EN 14399-1:2005 as implemented nationally by MSA EN
14399-1:2005
High-strength structural bolting assemblies for preloading - Part 1
General requirements
EN 14411:2006 as implemented nationally by MSA EN
14411:2007
Ceramic tiles – Definitions, classification, characteristics and
marking (ISO 13006:1998, modified)
EN 14428:2004+A1:2008 as implemented nationally by MSA
EN 14428:2004+A1:2008
Shower enclosures - Functional requirements and test methods
EN 14449:2005 as implemented nationally by MSA EN
14449:2005
Glass in building – Laminated glass and laminated safety glass –
Evaluation of conformity/Product standard
EN 14449:2005/AC:2005 as implemented nationally by MSA
EN 14449:2005/AC:2006
Glass in building – Laminated glass and laminated safety glass –
Evaluation of conformity/Product standard
EN 14471:2005 as implemented nationally by MSA EN
14471:2005
Chimneys - System chimneys with plastic flue liners -
Requirements and test methods
EN 14496:2005 as implemented nationally by MSA EN
14496:2005
Gypsum based adhesives for thermal/acoustic insulation composite
panels and plasterboards - Definitions, requirements and test
methods
EN 14509:2006 as implemented nationally by MSA EN
14509:2006
Self-supporting double skin metal faced insulating panels - Factory
made products – Specifications
EN 14509:2006/AC:2008 as implemented nationally by MSA
EN 14509:2006/AC:2008
Self-supporting double skin metal faced insulating panels - Factory
made products - Specifications
EN 14528:2007 as implemented nationally by MSA EN
14528:2008
Bidets - Functional requirements and test methods
EN 14545:2008 as implemented nationally by MSA EN
14545:2008
Timber structures - Connectors – Requirements
EN 14566:2008+A1:2009 as implemented nationally by MSA
EN 14566:2008+A1:2009
Mechanical fasteners for gypsum plasterboard systems -
Definitions, requirements and test methods
EN 14592:2008 as implemented nationally by MSA EN
14592:2008
Timber structures - Dowel-type fasteners – Requirements
EN 14604:2005 as implemented nationally by MSA EN
14604:2005
Smoke alarm devices
EN 14604:2005/AC:2008 as implemented nationally by MSA
EN 14604:2005/AC:2008
Smoke alarm devices
EN 14647:2005 as implemented nationally by MSA EN
14647:2005
Calcium aluminate cement - Composition, specifications and
conformity criteria
EN 14647:2005/AC:2006 as implemented nationally by MSA
EN 14647:2005/AC:2006
Calcium aluminate cement - Composition, specifications and
conformity criteria
EN 14680:2006 as implemented nationally by MSA EN
14680:2006
Adhesives for non-pressure thermoplastic piping systems –
Specifications
EN 14688:2006 as implemented nationally by MSA EN
14688:2006
Sanitary appliances - Wash basins - Functional requirements and
test methods
EN 14716:2004 as implemented nationally by MSA EN
14716:2005
Stretched ceilings - Requirements and test methods
EN 14782:2006 as implemented nationally by MSA EN
14782:2006
Self-supporting metal sheet for roofing, external cladding and
internal lining - Product specification and requirements
EN 14783:2006 as implemented nationally by MSA EN
14783:2006
Fully supported metal sheet and strip for roofing, external cladding
and internal lining - Product specification and requirements
EN 14785:2006 as implemented nationally by MSA EN
14785:2006
Residential space heating appliances fired by wood pellets -
Requirements and test methods
EN 14800:2007 as implemented nationally by MSA EN
14800:2007
Corrugated safety metal hose assemblies for the connection of
domestic appliances using gaseous fuels
EN 14814:2007 as implemented nationally by MSA EN
14814:2007
Adhesives for thermoplastic piping systems for fluids under
pressure – Specifications
EN 14843:2007 as implemented nationally by MSA EN
14843:2007
Precast concrete products – Stairs
EN 14844:2006+A1:2008 as implemented nationally by MSA
EN 14844:2006+A1:2008
Precast concrete products - Box culverts
EN 14889-1:2006 as implemented nationally by MSA EN
14889-1:2006
Fibres for concrete - Part 1: Steel fibres - Definitions, specifications
and conformity
EN 14889-2:2006 as implemented nationally by MSA EN
14889-2:2006
Fibres for concrete - Part 2: Polymer fibres - Definitions,
specifications and conformity
EN 14904:2006 as implemented nationally by MSA EN
14904:2006
Surfaces for sports areas - Indoor surfaces for multi-sports use –
Specification
EN 14909:2006 as implemented nationally by MSA EN
14909:2006
Flexible sheets for waterproofing - Plastic and rubber damp proof
courses - Definitions and characteristics
EN 14915:2006 as implemented nationally by MSA EN
14915:2006
Solid wood panelling and cladding - Characteristics, evaluation of
conformity and marking
EN 14915:2006/AC:2007 as implemented nationally by MSA
EN 14915:2006/AC:2007
Solid wood panelling and cladding - Characteristics, evaluation of
conformity and marking
EN 14933:2007 as implemented nationally by MSA EN
14933:2007
Thermal insulation and light weight fill products for civil
engineering applications - Factory made products of expanded
polystyrene (EPS) - Specification
EN 14934:2007 as implemented nationally by MSA EN
14934:2007
Thermal insulation and light weight fill products for civil
engineering applications - Factory made products of extruded
polystyrene foam (XPS) – Specification
EN 14963:2006 as implemented nationally by MSA EN
14963:2006
Roof coverings - Continuous rooflights of plastics with or without
upstands - Classification, requirements and test methods
EN 14964:2006 as implemented nationally by MSA EN
14964:2006
Rigid underlays for discontinuous roofing – Definitions and
characteristics
EN 14967:2006 as implemented nationally by MSA EN
14967:2006
Flexible sheets for waterproofing - Bitumen damp proof courses -
Definitions and characteristics
EN 14989-1:2007 as implemented nationally by MSA EN
14989-1:2007
Chimneys - Requirements and test methods for metal chimneys
and material independent air supply ducts for roomsealed heating
applications - Part 1: Vertical air/flue terminals for C6-type
appliances
EN 14989-2:2007 as implemented nationally by MSA EN
14989-2:2007
Chimneys - Requirements and test methods for metal chimneys
and material independent air supply ducts for roomsealed heating
applications - Part 2: Flue and air supply ducts for room sealed
appliances
EN 14991:2007 as implemented nationally by MSA EN
14991:2007
Precast concrete products - Foundation elements
EN 14992:2007 as implemented nationally by MSA EN
14992:2007
Precast concrete products - Wall elements
EN 15037-1:2008 as implemented nationally by MSA EN
15037-1:2008
Precast concrete products - Beam-and-block floor systems - Part 1
Beams
EN 15048-1:2007 as implemented nationally by MSA EN
15048-1:2007
Non-preloaded structural bolting assemblies - Part 1: General
requirements
EN 15050:2007 as implemented nationally by MSA EN
15050:2007
Precast concrete products - Bridge elements
EN 15069:2008 as implemented nationally by MSA EN
15069:2008
Safety gas connection valves for metal hose assemblies used for
the connection of domestic appliances using gaseous fuel
EN 15088:2005 as implemented nationally by MSA EN
15088:2006
Aluminium and aluminium alloys - Structural products for
construction works - Technical conditions for inspection and
delivery
EN 15102:2007 as implemented nationally by MSA EN
15102:2007
Decorative wallcoverings - Roll and panel form products
EN 15129:2009 as implemented nationally by MSA EN
15129:2009
Anti-seismic devices
EN 15167-1:2006 as implemented nationally by MSA EN
15167-1:2006
Ground granulated blast furnace slag for use in concrete, mortar
and grout - Part 1: Definitions, specifications and conformity
criteria
EN 15250:2007 as implemented nationally by MSA EN
15250:2007
Slow heat release appliances fired by solid fuel - Requirements and
test methods
EN 15258:2008 as implemented nationally by MSA EN
15258:2008
Precast concrete products - Retaining wall elements
EN 15274:2007 as implemented nationally by MSA EN
15274:2007
General purpose adhesives for structural assembly - Requirements
and test methods
EN 15275:2007 as implemented nationally by MSA EN
15275:2007
Structural adhesives – Characterisation of anaerobic adhesives
for co-axial metallic assembly in building and civil engineering
structures
EN 15283-1:2008+A1:2009 as implemented nationally by MSA
EN 15283-1:2008+A1:2009
Gypsum boards with fibrous reinforcement - Definitions,
requirements and test methods - Part 1: Gypsum boards with mat
reinforcement
EN 15283-2:2008+A1:2009 as implemented nationally by MSA
EN 15283-2:2008+A1:2009
Gypsum boards with fibrous reinforcement - Definitions,
requirements and test methods - Part 2: Gypsum fibre boards
EN 15285:2008 as implemented nationally by MSA EN
15285:2008
Agglomerated stone - Modular tiles for flooring and stairs (internal
and external)
EN 15285:2008/AC:2008 as implemented nationally by MSA
EN 15285:2008/AC:2008
Agglomerated stone - Modular tiles for flooring and stairs (internal
and external)
EN 15322:2009 as implemented nationally by MSA EN
15322:2009
Bitumen and bituminous binders - Framework for specifying cut-
back and fluxed bituminous binders
EN 15381:2008 as implemented nationally by MSA EN
15381:2008
Geotextiles and geotextile-related products - Characteristics
required fro use in pavements and asphalt overlays
EN 15382:2008 as implemented nationally by MSA EN
15382:2008
Geosynthetic barriers - Characteristics required for use in
transportation infrastructure
EN 15435:2008 as implemented nationally by MSA EN
15435:2008
Precast concrete products - Normal weight and lightweight
concrete shuttering blocks - Product properties and performance
EN 15498:2008 as implemented nationally by MSA EN
15498:2008
Precast concrete products - Wood-chip concrete shuttering blocks -
Product properties and performance
EN 15824:2009 as implemented nationally by MSA EN
15824:2009
Specification for external renders and internal plasters based on
organic binders”.
B
€2.89