EC Type-Approval of Motor Vehicles and their Trailers (ln_2009_330) | MT

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Preamble — EC Type-Approval of Motor Vehicles and their Trailers Open official source

VER|JONI ELETTRONIKA

B

Suppliment tal-Gazzetta tal-Gvern ta’ Malta, Nru. 18,502, 6 ta’ Novembru, 2009

Taqsima B

L.N. 330 of 2009

PRODUCT SAFETY ACT

(CAP. 427)

EC Type-Approval of Motor Vehicles and their Trailers

(Amendment) Regulations, 2009

IN exercise of the powers conferred by articles 38 to 40 of the

Product Safety Act, the Minister for Finance, the Economy and

Investment, on the advice of the Malta Standards Authority, has made

the following regulations:-

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 1 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

The title of these rules is the EC Type-Approval of Motor Citation.

Vehicles and their Trailers (Amendment) Regulations, 2009 and they

shall be read and construed as one with the EC Type-Approval of S.L. 427.23

Motor Vehicles and their Trailers Regulations, hereinafter in these

regulations referred to as "the principal regulations".

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Schedule I — EC Type-Approval of Motor Vehicles and their Trailers Open official source

" SCHEDULE I

[Regulations 3, 6(3) and (4)]

Complete list of information for the purpose of EC type-approval of vehicles (a)

All information documents in these regulations and in separate EU directives or regulations shall

consist only of extracts from, and adhere to the item numbering system of, this total list.

The following information shall be supplied in triplicate and include a list of contents. Any drawings

shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format.

Photographs, if any, shall show sufficient detail.

If the systems, components or separate technical units referred to in this Schedule have electronic

controls, information concerning their performance shall be supplied.

0. GENERAL

Make (trade name of manufacturer): ......................................................................

Type: .................................................................................................................

Chassis: ..............................................................................................................

Bodywork/complete vehicle: .................................................................................

Commercial name(s) (if available): .........................................................................

Means of identification of type, if marked on the vehicle/component/separate technical

unit ( b ): ..............................................................................................................

Chassis: ..............................................................................................................

Bodywork/complete vehicle: .................................................................................

Location of that marking: .....................................................................................

Chassis: ..............................................................................................................

Bodywork/complete vehicle: ..................................................................................

Category of vehicle ( c ): .........................................................................................

Classification(s) according to the dangerous goods which the vehicle is intended to

transport: ...........................................................................................................

Name and address of manufacturer: ......................................................................

Location and method of attachment of statutory plates and location of vehicle

identification number: .........................................................................................

On the chassis: ...................................................................................................

On the bodywork: ..............................................................................................

(Not attributed)

VER|JONI ELETTRONIKA

Name(s) and address(es) of assembly plant(s): ..........................................................

Name and address of the manufacturer’s representative (if any): ..............................

1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE

Photographs and/or drawings of a representative vehicle: ...............................................

Dimensional drawing of the whole vehicle: ......................................................................

Number of axles and wheels: .................................................................................................

Number and position of axles with twin wheels: ..............................................................

Number and position of steered axles: ...............................................................................

Powered axles (number, position, interconnection): .........................................................

Chassis (if any) (overall drawing): ...........................................................................................

Material used for the side-members ( d ): ...............................................................................

Position and arrangement of the engine: .........................................................................

Driving cab (forward control or bonneted) ( e ): .................................................................

Hand of drive: left/right ( 1 ): .............................................................................

Vehicle is equipped to be driven in right/left ( 1 ) hand traffic: .............................................

Specify if the motor vehicle is intended to tow semi-trailers or other trailers and, if the

trailer is a semi-, drawbar or centre-axle trailer, specify vehicles specially designed for

the controlled-temperature carriage of goods: ........................................................

MASSES AND DIMENSIONS ( f )

2. ( g ) (in kg and mm) (Refer to drawing where applicable)

Wheel base(s) (fully loaded) ( g1 )

Two-axle vehicles: ...........................................................................................................

Vehicles with two or more axles: ....................................................................................

Axle spacing between consecutive axles going from the foremost to the rearmost

axle: ...................................................................................................................................

Total axle spacing: ..............................................................................................

Fifth wheel

In the case of semi-trailers

Distance between the axis of the fifth wheel kingpin and the rearmost end of the

semi-trailer: ......................................................................................................

Maximum distance between the axis of the fifth wheel kingpin and any point on

the front of the semi-trailer: ..............................................................................................

VER|JONI ELETTRONIKA

Semi-trailer special wheelbase (as defined in Section 7.6.1.2 of Annex I to Directive 97/

27/EC: ......................................................................................................................................

In the case of semi-trailer towing vehicles

Fifth wheel lead (maximum and minimum, indicate the permissible values in the case

of an incomplete vehicle) ( g2 ): ...............................................................................................

Maximum height of the fifth wheel (standardised) ( g3 ): ......................................................

Axle track(s) and width(s)

Track of each steered axle ( g4 ): ..............................................................................................

Track of all other axles ( g4 ): ...................................................................................................

Width of the widest rear axle: ...........................................................................................

Width of the foremost axle (measured at the outermost part of the tyres excluding

the bulging of the tyres close to the ground): ......................................................

Range of vehicle dimensions (overall)

For chassis without bodywork

Length ( g5 ): .........................................................................................................

Maximum permissible length: ...............................................................................................

Minimum permissible length: ...............................................................................................

In the case of trailers, maximum permissible drawbar length ( g6 ): .....................................

Width ( g7 ): ...........................................................................................................

Maximum permissible width: ...............................................................................................

Minimum permissible width: ................................................................................................

Height (in running order) ( g8 ) (for suspensions adjustable for height, indicate normal

running position): ...............................................................................................

Front overhang ( g9 ): .......................................................................................................................

Approach angle ( g10 ): ............................ degrees.

Rear overhang ( g11 ): .............................................................................................

Departure angle ( g12 ): .................... degrees.

Minimum and maximum permissible overhang of the coupling point ( g13 ): .................

Ground clearance (as defined in point 4.5 of Section A of Schedule II): .....................

Between the axles: ......................................................................................................................

Under the front axle(s): ..........................................................................................................

VER|JONI ELETTRONIKA

Under the rear axle(s): ............................................................................................................

Ramp angle ( g14 ): .............................. degrees.

Extreme permissible positions of the centre of gravity of the body and/or interior

fittings and/or equipment and/or payload: ...........................................................

For chassis with bodywork

Length ( g5 ): ..........................................................................................................

Length of the loading area: ...................................................................................

In the case of trailers, maximum permissible draw bar length ( g6 ): ........................

Width ( g7 ): ..........................................................................................................

Thickness of the walls (in the case of vehicles designed for controlled-temperature

carriage of goods): ..............................................................................................

Height (in running order) ( g8 ) (for suspensions adjustable for height, indicate normal

running position): ...............................................................................................

Front overhang ( g9 ): .......................................................................................................................

Approach angle ( g10 ): ......................................... degrees.

Rear overhang ( g11 ): .............................................................................................

Departure angle ( g12 ): .................................... degrees.

Minimum and maximum permissible overhang of the coupling point ( g13 ): .................

Ground clearance (as defined in point 4.5 of Section A of Schedule II)

Between the axles: .....................................................................................................................

Under the front axle(s): .......................................................................................................

Under the rear axle(s): ............................................................................................................

Ramp angle ( g14 ): ....................................... degrees.

Extreme permissible positions of the centre of gravity of the payload (in the case of

non-uniform load): .................................................................................................................

Position of centre of gravity of the vehicle (M 2 and M 3 ) at its technically permissible

maximum laden mass in the longitudinal, transverse and vertical directions: .....

For bodywork approved without chassis (vehicles M 2 and M 3 )

Length ( g5 ): .............................................................................................................................................

Width ( g7 ): ..........................................................................................................................................

Nominal height (in running order) ( g8 ) on intended chassis type(s) (for suspensions

adjustable for height, indicate normal running position): .....................................

VER|JONI ELETTRONIKA

Mass of the bare chassis (without cab, coolant, oils, fuel, spare wheel, tools and

driver): ....................................................................................................................................

Distribution of this mass among the axles: .......................................................

Mass in running order

Mass of the vehicle with bodywork and, in the case of a towing vehicle of category

other than M 1 , with coupling device, if fitted by the manufacturer, in running order, or

mass of the chassis or chassis with cab, without bodywork and/or coupling device if the

manufacturer does not fit the bodywork and/or coupling device (including liquids, tools,

spare wheel, if fitted, and driver and, for buses and coaches, a crew member if there is a

crew seat in the vehicle) ( h ) (maximum and minimum for each variant): ...................

Distribution of this mass among the axles and, in the case of a semi-trailer or centre-axle

trailer, load on the coupling point (maximum and minimum for each variant): ..........

Minimum mass of the completed vehicle as stated by the manufacturer, in the case

of an incomplete vehicle: ....................................................................................

Distribution of this mass among the axles and, in the case of a semi-trailer or centre-axle

trailer, load on the coupling point: .........................................................................

Technically permissible maximum laden mass stated by the manufacturer ( i )( 3 ): .......

Distribution of this mass among the axles and, in the case of a semi-trailer or centre-axle

trailer, load on the coupling point ( 3 ): .....................................................................

Technically permissible maximum mass on each axle: .................................................

Technically permissible maximum mass on each axle group: ...................................

Technically permissible maximum towable mass of the motor vehicle in case of

Drawbar trailer: ................................................................................................

Semi-trailer: ....................................................................................................................................

Centre-axle trailer: ......................................................................................................................

Maximum ratio of the coupling overhang ( j ) to the wheelbase: .......................................

Maximum V-value: ............................. kN.

Technically permissible maximum mass of the combination ( 3 ): ......................................

Vehicle is/is not ( 1 ) suitable for towing loads (item 1.2 of Annex II to Directive 77/

389/EEC).

Maximum mass of unbraked trailer: ..................................................................................

Technically permissible maximum static vertical load/mass on the vehicle’s

coupling point

Of the motor vehicle: ..........................................................................................................

Of the semi-trailer or centre-axle trailer: ............................................................................

VER|JONI ELETTRONIKA

Maximum permissible mass of the coupling device (if not fitted by the manufacturer)

Rear swing-out (Section 7.6.2. and 7.6.3. of Annex I to Directive 97/27/EC)

Engine power/maximum mass ratio: ................................ kW/kg.

Engine power/technically permissible maximum laden mass of the combination ratio

(Section 7.10 of Annex I to Directive 97/27/EC): ....................... kW/kg.

Hill-starting ability (solo vehicle) ( 4 ): ........................... %.

Intended registration/in service maximum permissible masses (optional: where these

values are given, they shall be verified in accordance with the requirements of Annex IV

to Directive 97/27/EC): ..........................................................................................................

Intended registration/in service maximum permissible laden mass (several entries

possible for each technical configuration ( 5 ))

Intended registration/in service maximum permissible mass on each axle and, in the

case of a semi-trailer or centre-axle trailer, intended load on the coupling point stated

by the manufacturer if lower than the technically permissible maximum mass on the

coupling point (several entries possible for each technical configuration ( 5 )): ...........

Intended registration/in service maximum permissible mass on each axle group (several

entries possible for each technical configuration ( 5 )): .........................................

Intended registration/in service maximum permissible towable mass (several entries

possible for each technical configuration ( 5 )): ....................................................

Intended registration/in service maximum permissible mass of the combination (several

entries possible for each technical configuration ( 5 )): .........................................

POWER PLANT ( k )

3. Manufacturer of the engine: ..........................................................................

Manufacturer’s engine code (as marked on the engine or other means of identification)

Approval number (if appropriate) including fuel identification marking: .........

(heavy-duty vehicles only)

Internal combustion engine

Specific engine information

Working principle: positive ignition/compression ignition ( l ) Cycle

four stroke/two stroke/rotary ( l )

Number and arrangement of cylinders: ..............................................................................

Bore ( l ): ................................. mm

Stroke ( l ): .............................. mm

Firing order: ............................................................................................................................

VER|JONI ELETTRONIKA

Engine capacity ( m ): ..................................... cm 3

Volumetric compression ratio ( 2 ): .........................................................................................

Drawings of combustion chamber, piston crown and, in the case of positive ignition

engines, piston rings: .........................................................................................

Normal engine idling speed ( 2 ): .............. min -1

High engine idling speed ( 2 ): ................... min -1

Carbon monoxide content by volume in the exhaust gas with the engine idling ( 2 )

........................ % as stated by the manufacturer (positive ignition engines only)

Maximum net power ( n ): .............. kW at .......... min -1 (manufacturer’s declared value)

Maximum permitted engine speed as prescribed by the manufacturer: ............ min -1

Maximum net torque ( n ): ............ Nm at ........... min -1 (manufacturer’s declared value)

Fuel

Light-duty vehicles: Diesel/Petrol/LPG/NG or Biomethane/Ethanol (E 85)/Biodiesel/

Hydrogen ( 1 ) ( 6 )

Heavy-duty vehicles: Diesel/Petrol/LPG/NG-H/NG-L/NG-HL/Ethanol ( 1 ) ( 6 )

Fuel tank inlet: restricted orifice/label ( 1 )

Vehicle fuel type: Mono fuel, Bi fuel, Flex fuel ( 1 )

Maximum amount of biofuel acceptable in fuel (manufacturer's declared value): ...........

Fuel tank(s)

Service fuel tank(s)

Number and capacity of each tank: .......................................................................................

Material: ..................................................................................................................................

Drawing and technical description of the tank(s) with all connections and all lines of

the breathing and venting system, locks, valves, fastening devices: ....................

Drawing clearly showing the position of the tank(s) in the vehicle: ................................

Reserve fuel tank(s)

Number and capacity of each tank: .......................................................................................

Material: ...................................................................................................................................

Drawing and technical description of the tank(s) with all connections and all lines of

the breathing and venting system, locks, valves, fastening devices: ....................

Drawing clearly showing the position of the tank(s) in the vehicle: ................................

Fuel feed

VER|JONI ELETTRONIKA

By carburettor(s): yes/no ( 1 )

By fuel injection (compression ignition only): yes/no ( 1 )

System description: ................................................................................................................

Working principle: direct injection/pre-chamber/swirl chamber ( 1 )

Injection pump

Make(s): .................................................................................................................................................................

Type(s): ........................................................................................................................................................

Maximum fuel delivery ( 1 ) ( 2 ): ............. mm3/stroke or cycle at a pump speed of: ........... min -1

or, alternatively, a characteristic diagram: ................................................................................................

(When boost control is supplied, state the characteristic fuel delivery and boost pressure versus

engine speed)

Static injection timing ( 2 )

Injection advance curve ( 2 )

Calibration procedure: test bench/engine ( 1 )

Governor

Type: .............................................................................................................................................................

Cut-off point

Speed at which cut-off starts under load: ....................... min -1

Maximum no-load speed .............................. min -1

Idling speed .............................. min -1

Injection piping (heavy-duty vehicles only)

Length: .............................. mm

Internal diameter: .......................... mm

Common rail, make and type: ............................................................................................

Injector(s)

Make(s): .................................................................................................................................................................

Type(s): ........................................................................................................................................................

Opening pressure ( 2 ): ............... kPa or characteristic diagram ( 2 ): .....................................

Cold start system

Make(s): ..................................................................................................................................

Type(s): ...................................................................................................................................

VER|JONI ELETTRONIKA

Description: .............................................................................................................................

Auxiliary starting aid

Make(s): .................................................................................................................................................................

Type(s): ........................................................................................................................................................

System description: ................................................................................................................

Electronic controlled injection: yes/no ( 1 )

Make(s): .............................................................................................................

Types(s)

Description of the system (in the case of systems other than continuous

injection give equivalent details): .....................................................................

3.2.4.2.9.3.1. Make and type of the control unit (ECU): .........................................................

3.2.4.2.9.3.2. Make and type of the fuel regulator: .................................................................

3.2.4.2.9.3.3. Make and type of the air-flow sensor: ...............................................................

3.2.4.2.9.3.4. Make and type of fuel distributor: ....................................................................

3.2.4.2.9.3.5. Make and type of the throttle housing: .............................................................

3.2.4.2.9.3.6. Make and type of water temperature sensor: ....................................................

3.2.4.2.9.3.7. Make and type of air temperature sensor: .........................................................

3.2.4.2.9.3.8. Make and type of air pressure sensor: ...............................................................

3.2.4.2.9.3.9. Software calibration number(s): .......................................................................

By fuel injection (positive ignition only): yes/no ( 1 )

Working principle: intake manifold (single-/multi-point ( 1 ))/other (specify) ( 1 ) ................

Make(s): .................................................................................................................................................................

Type(s): ........................................................................................................................................................

System description (In the case of systems other than continuous injection give

equivalent details): ..................................................................................................................

Make and type of the control unit (ECU): .....................................................................

Make and type of fuel regulator: .........................................................................................

Make and type of air-flow sensor: ...................................................................................

Make and type of fuel distributor: .........................................................................

Make and type of pressure regulator: ......................................................................

Make and type of micro switch: ..........................................................................................

VER|JONI ELETTRONIKA

Make and type of idling adjustment screw: ............................................................

Make and type of throttle housing: .................................................................................

Make and type of water temperature sensor: ..................................................................

3.2.4.3.4.10. Make and type of air temperature sensor: .......................................................................

Make and type of air pressure sensor: ..............................................................................

Software calibration number(s): .......................................................................................

Injectors: opening pressure ( 2 ): ..................... kPa or characteristic diagram: .................

Make: ...............................................................................................................

Type: ........................................................................................................................................

Injection timing: ......................................................................................................................

Cold start system

Operating principle(s): ........................................................................................................................................

Operating limits/settings ( 1 )( 2 ): ................................................................................................................

Feed pump

Pressure ( 2 ): .......................... kPa or characteristic diagram ( 2 ): ............................

Electrical system

Rated voltage: ............................. V, positive/negative ground ( 1 )

Generator

Type: ........................................................................................................................................

Nominal output: ................................... VA

Ignition system (spark ignition engines only)

Make(s): ................................................................................................................................................................

Type(s): ........................................................................................................................................................

Working principle: .....................................................................................................................

Ignition advance curve or map ( 2 ): ........................................................................................

Static ignition timing ( 2 ): ...........................................................................................................

degrees before TDC

Spark plugs

Make(s): ................................................................................................................................................................

Type(s): ........................................................................................................................................................

VER|JONI ELETTRONIKA

Gap setting .................................. mm

Ignition coil(s)

Make(s): ................................................................................................................................................................

Type(s): ........................................................................................................................................................

Cooling system: liquid/air ( 1 )

Nominal setting of the engine temperature control mechanism: ...........................................

Liquid: ..............................................................................................................

Nature of liquid: ...............................................................................................

Circulating pump(s): yes/no ( 1 )

Characteristics: .............................. or

Make(s): ...........................................................................................................

Type(s): ............................................................................................................

Drive ratio(s): ...................................................................................................

Description of the fan and its drive mechanism: ...............................................

Air

Blower: yes/no ( 1 )

Characteristics: ............................................. or

Make(s): .................................................................................................................................................................

Type(s): ........................................................................................................................................................

Drive

ratio(s)

Intake system

Pressure charger: yes/no ( 1 )

Make(s): .................................................................................................................................................................

Type(s): ........................................................................................................................................................

Description of the system (e.g. maximum charge pressure: ......................... kPa;

wastegate if applicable)

Intercooler: yes/no ( 1 )

Type: air-air/air-water ( 1 )

Intake depression at rated engine speed and at 100% load (compression ignition

engines only)

VER|JONI ELETTRONIKA

Minimum allowable: ................................. kPa

Maximum allowable: ................................. kPa

Description and drawings of inlet pipes and their accessories (plenum chamber, heating

device, additional air intakes, etc.): ........................................................................................................

Intake manifold description (include drawings and/or photos): .......................................

Air filter, drawings: ............................................................... or

Make(s): .................................................................................................................................................................

Type(s): ........................................................................................................................................................

Intake silencer, drawings: ...................................................... or

Make(s): .................................................................................................................................................................

Type(s): ........................................................................................................................................................

Exhaust system

Description and/or drawing of the exhaust manifold: ....................................................

Description and/or drawing of the exhaust system: .......................................................

Maximum allowable exhaust back pressure at rated engine speed and at 100 load

(compression ignition engines only): ............................ kPa

Type, marking of exhaust silencer(s): ..................................................................................

Where relevant for exterior noise, reducing measures in the engine compartment and

on the engine: ...................................................................................................................

Location of the exhaust outlet: ........................................................................................

Exhaust silencer containing fibrous materials: ..................................................................

Exhaust system volume: .................................... dm 3

Minimum cross-sectional areas of inlet and outlet ports: ..............................................

Valve timing or equivalent data

Maximum lift of valves, angles of opening and closing, or timing details of alternative

distribution systems, in relation to dead centres. For variable timing system, minimum and

maximum timing: .......................................................................................................................................

Reference and/or setting ranges ( 1 )

Measures taken against air pollution

Device for recycling crankcase gases (description and drawings): ....................................

Additional pollution control devices (if any, and if not covered by another heading)

Catalytic converter: yes/no ( 1 )

VER|JONI ELETTRONIKA

3.2.12.2.1.1.

Number of catalytic converters and elements Provide the information below for each

separate unit): .......................................................................................................................

3.2.12.2.1.2.

Dimensions, shape and volume of the catalytic converter(s): .........................................

3.2.12.2.1.3.

Type of catalytic action: .....................................................................................................

3.2.12.2.1.4.

Total charge of precious metals: ........................................................................................

3.2.12.2.1.5.

Relative concentration: ..........................................................................................................

3.2.12.2.1.6.

Substrate (structure and material): .....................................................................................

3.2.12.2.1.7.

Cell density: ...................................................................................................................................

3.2.12.2.1.8.

Type of casing for the catalytic converter(s): ...................................................................

3.2.12.2.1.9.

Location of the catalytic converter(s) (place and reference distance in the exhaust line)

Heat shield: yes/no ( 1 )

3.2.12.2.1.10.

3.2.12.2.1.11. Regeneration systems/method of exhaust after-treatment systems, description: .................

3.2.12.2.1.11.1. Number of Type I operating cycles (or equivalent engine bench cycles) between two

cycles where regenerative phases occur under the conditions equivalent to Type I test

(Distance “D” in Figure 1 in Annex 13 to UNECE Regulation No 83): ..............................

3.2.12.2.1.11.2. Description of method employed to determine the number of cycles between two cycles

where regenerative phases occur: .............................................................................................

3.2.12.2.1.11.3. Parameters to determine the level of loading required before regeneration occurs (i.e.

temperature, pressure etc.): ........................................................................................................

3.2.12.2.1.11.4. Description of method used to load system in the test procedure described in paragraph

3.1 of Annex 13 to UNECE Regulation No 83): ....................................................................

3.2.12.2.1.11.5. Normal operating temperature range: ................................... K

3.2.12.2.1.11.6. Consumable reagents: yes/no ( 1 )

3.2.12.2.1.11.7. Type and concentration of reagent needed for catalytic action: .............................................

3.2.12.2.1.11.8. Normal operational temperature range of reagent: .......................... K

3.2.12.2.1.11.9. International standard: ................................................................................................................

3.2.12.2.1.11.10. Frequency of reagent refill: continuous/maintenance ( 1 )

3.2.12.2.1.12. Make of catalytic converter: ......................................................................................................

3.2.12.2.1.13. Identifying part number: ............................................................................................................

Oxygen sensor: yes/no ( 1 )

3.2.12.2.2.

3.2.12.2.2.1.

Make: ............................................................................................................................................................

3.2.12.2.2.2.

Location: .........................................................................................................................................

VER|JONI ELETTRONIKA

Control range: ......................................................................................................................

Type: ....................................................................................................................................

Identifying part number: .....................................................................................................

Air injection: yes/no ( 1 )

Type (pulse air, air pump, etc.): .............................................................................................

Exhaust gas recirculation: yes/no ( 1 )

Characteristics (make, type, flow, etc.): ................................................................................

Water-cooled system: yes/no ( 1 )

Evaporative emissions control system: yes/no ( 1 )

Detailed description of the devices and their state of tune: ...........................................

Drawing of the evaporative control system: .....................................................................

Drawing of the carbon canister: ......................................................................................

Mass of dry charcoal: ........................ g

Schematic drawing of the fuel tank with indication of capacity and material: ............

Drawing of the heat shield between tank and exhaust system: .....................................

Particulate trap (PT): yes/no ( 1 )

Dimensions, shape and capacity of the particulate trap: ................................................

Type and design of the particulate trap: ..........................................................................

Location (reference distance in the exhaust line): .............................................................

Method or system of regeneration, description and/or drawing: ...................................

3.2.12.2.6.4.1. Number of Type I operating cycles (or equivalent engine bench cycles) between two cycles

where regenerative phases occur under the conditions equivalent to Type I test (Distance “D”

in Figure 1 in Annex 13 to UNECE Regulation No 83): ....................................................................

3.2.12.2.6.4.2. Description of method employed to determine the number of cycles between two cycles

where regenerative phases occur: ............................................................................................................

3.2.12.2.6.4.3. Parameters to determine the level of loading required before regeneration occurs (i.e.

temperature, pressure etc.): ........................................................................................................................

3.2.12.2.6.4.4. Description of method used to load system in the test procedure described in paragraph 3.1 of

Annex 13 to UNECE Regulation No 83): .............................................................................................

Make of particulate trap: ............................................................................................................................

Identifying part number: ............................................................................................................................

Normal operating temperature: .............................. (K) and pressure range ........................ (KPa)

VER|JONI ELETTRONIKA

(heavy-duty vehicles only)

3.2.12.2.6.8.

In the case of periodic regeneration (heavy-duty vehicles only)

3.2.12.2.6.8.1. Number of ETC test cycles between 2 regenerations (n1): .................................................................

3.2.12.2.6.8.2. Number of ETC cycles during regeneration (n2): ................................................................................

On-board-diagnostic (OBD) system: yes/no ( 1 )

3.2.12.2.7.

3.2.12.2.7.1.

Written description and/or drawing of the MI: ...............................................................

3.2.12.2.7.2.

List and purpose of all components monitored by the OBD system: ............................

3.2.12.2.7.3.

Written description (general working principles) for

3.2.12.2.7.3.1.

Positive-ignition engines

3.2.12.2.7.3.1.1. Catalyst monitoring: ..................................................................................................................

3.2.12.2.7.3.1.2. Misfire detection: ..........................................................................................................................

3.2.12.2.7.3.1.3. Oxygen sensor monitoring: ...................................................................................................

3.2.12.2.7.3.1.4. Other components monitored by the OBD system: ....................................................................

3.2.12.2.7.3.2.

Compression-ignition engines: ................................................................................................

3.2.12.2.7.3.2.1. Catalyst monitoring: ..................................................................................................................

3.2.12.2.7.3.2.2. Particulate trap monitoring: ...............................................................................................

3.2.12.2.7.3.2.3. Electronic fuelling system monitoring: ................................................................................

3.2.12.2.7.3.2.4. deNOx system monitoring: ..................................................................................................

3.2.12.2.7.3.2.5. Other components monitored by the OBD system: .........................................................

3.2.12.2.7.4.

Criteria for MI activation (fixed number of driving cycles or statistical method): .........

3.2.12.2.7.5.

List of all OBD output codes and formats used (with explanation of each): ...................

3.2.12.2.7.6.

The following additional information shall be provided by the vehicle manufacturer for the

purposes of enabling the manufacture of OBD-compatible replacement or service parts and

diagnostic tools and test equipment.

3.2.12.2.7.6.1. A description of the type and number of the preconditioning cycles used for the original type

approval of the vehicle.

3.2.12.2.7.6.2. A description of the type of the OBD demonstration cycle used for the original type-approval

of the vehicle for the component monitored by the OBD system.

3.2.12.7.6.3.

A comprehensive document describing all sensed components with the strategy for fault

detection and MI activation (fixed number of driving cycles or statistical method), including a

list of relevant secondary sensed parameters for each component monitored by the OBD

system. A list of all OBD output codes and format used (with an explanation of each)

associated with individual emission related power-train components and individual non-

emission related components, where monitoring of the component is used to determine MI

activation, including in particular a comprehensive explanation for the data given in service

$05 Test ID $21 to FF and the data given in service $06.

In the case of vehicle types that use a communication link in accordance with ISO 15765-4

“Road vehicles, diagnostics on controller area network (CAN) - Part 4: requirements for

emissions-related systems”, a comprehensive explanation for the data given in service $06 Test

ID $00 to FF, for each OBD monitor ID supported, shall be provided.

3.2.12.2.7.6.4. The information required above may be defined by completing a table as described below.

3.2.12.2.7.6.4.1. Low-duty vehicles

Component

Fault

Monitoring

Fault

MI

Secondary Precondi- Demon-

code

strategy

detection activation parameters tioning stration

criteria

test

Catalyst

O xy g en Difference 3rd cycle En g in e Two type Type I

s en so r 1 b etw ee n

speed load, I cycles

and senso s en so r 1

A/F mode,

2 signals and sensor

c ata ly st

2 signals

te mp e ra-

ture

3.2.12.2.7.6.4.2. Heavy-duty vehicles

Component

Fault

Monitoring

Fault

MI

Secondary Precondi- Demon-

code

strategy

detection activation parameters tioning stration

criteria

test

SCR

Pxxx

N Ox

Difference 3rd cycle En g in e Th ree

OBD test

Catalyst

s en so r 1 b etw ee n

speed load, OBD test cy cl e

and sensor s en so r 1

c ata ly st cycles (3 (sh o rt

2 signals and sensor

te mp e ra- short ESC ESC

2 signals

tu re ,

cycles)

cycle)

re ag e nt

activity

Other systems (description and operation): .......................................................................

Torque limiter: yes/no ( 1 )

Description of the torque limiter activation (heavy-duty vehicles only): ........................

Description of the full load curve limitation (heavy-duty vehicles only): .......................

Smoke opacity

Location of the absorption coefficient symbol (compression ignition engines only): ....

Power at six points of measurement (see point 2.1 of Annex III to Directive 72/306/

EEC as amended)

Engine power measured on test bench/on the vehicle ( 1 )

Declared speeds and powers

Engine speed (min -1 )

Measurement points

Power (kW)

1. ...................

2. ..................

3. ..................

4. ..................

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 2 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

These regulations implement the requirements. of the Scope.

following

(a)

Commission Regulation (EC) No 1060/2008 of 7

October 2008, replacing Annexes I, III, IV, VI, VII, XI and XV

to Directive 2007/46/EC of the European Parliament and of the

Council establishing a framework for the approval of motor

vehicles and their trailers, and of systems, components and

separate technical units intended for such vehicles (Framework

Directive);

(b) Commission Regulation (EC) 692/2008 of 18 July

2008 implementing and amending Regulation (EC) 715/2007 of

the European Parliament and of the Council on type-approval of

motor vehicles with respect to emissions form light passenger

and commercial vehicles (Euro5 and Euro6) and on access to

vehicle repair and maintenance information; the provisions of

Articles 4(5), 4(6), 5(3)(d) and 5(3)(e) of Commission

Regulation (EC) 692/2009 are transposed iin Schedule XXI of

the principal regulations, and such transposed provisions shall

apply from 1 September 2011 for the type-approval of new

types of vehicles and from 1 January 2014 for all new vehicles

sold, registered or put into service into the Community;

(c)

Commission Directive 2009/1/EC of 7 January

2009 amending, for the purpose of its adaptation to technical

progress, Directive 2005/64/EC of the European Parliament and

VER|JONI ELETTRONIKA

of the Council on the type-approval of motor vehicles with

regard to their reusability, recyclability and recoverability; the

provisions of Commission Directive 2009/1/EC are transposed

in Schedule XXI of the principal regulations, and such

transposed provisions shall apply from 4 February 2010;

(d) Commission Regulation (EC) 78/2009 of the

European Parliament and of the Council of 14 January 2009 on

type-approval of motor vehicles with regard to the protection of

pedestrians and other vulnerable road users, amending Directive

2007/EC and repealing Directives 2003/102/EC and 2005/66/

EC; the provisions of Commission Regulation (EC) 78/2009 are

transposed in Schedules I, III, IV, VI, XI and XXII of the

principal regulations, and such transposed provisions shall

apply from 24 November 2009 with the exception of the

transposition of Article 4(6) and Article 9(9), of the said

Commission Regulation (EC) 78/2009, which shall apply from

3rd February 2009, and the transposition of Article 9(2) to (8) of

the said Commission Regulation (EC) 78/2009, which shall

apply from the dates set out therein;

(e)

Commission Regulation (EC) 79/2009 of the

European Parliament and of the Council of 14 January 2009 on

type-approval of hydrogen-powered motor vehicles, and

amending Directive 2007/46/EC; the provisions of Commission

Regulation (EC) 79/2009 are transposed in Schedules IV, VI, XI

and XXII of the principal regulations, and such transposed

provisions shall apply from 24 February 2011, with the

exception of the transposition of Article 11(3) and Article 12 of

the said Commission Regulation (EC) 79/2009, which shall

apply from 3rd February 2009, and the transposition of Article

11(2) of the said Commission Regulation (EC) 79/2009, which

shall apply from the dates set out therein;

(f)

Commission Directive 2009/19/EC of 12 March

2009 amending, for the purposes of its adaptation to technical

progress, Council Directive 72/245/EEC relating to the radio

interference (electromagnetic compatibility) of vehicles; the

provisions of Directive 2009/19/EC are transposed in Schedule

XXI of the principal regulations, and such transposed provisions

shall apply from 2 October 2009;

(g) Commission Regulation (EC) 385/2009 of 7 May

2009 replacing Annex IX to Directive 2007/46/EC of the

European Parliament and of the Council establishing a

framework for the approval of motor vehicles and their trailers,

and of systems, components and separate technical units

VER|JONI ELETTRONIKA

intended for such vehicles; the provisions of Commission

Regulation (EC) 385/2009 are transposed in Schedules IX and

XXII of the principal regulations, and such transposed

provisions shall be deemed to have entered into force on the 29

April 2009;

(h) Commission Regulation (EC) 595/2009 on type-

approval of motor vehicles and engines with respect to

emissions from heavy duty vehicles (Euro VI) and on access to

vehicle repair and maintenance information and amending

Commission Regulation (EC) 715/2007 and Directive 2007/46/

EC and repealing Directives 80/1269/EEC and 2005/78/EC; the

provisions of Commission Regulation (EC) 595/2009 are

transposed in Schedules XXI and XXII of the principal

regulations, and such transposed provisions shall apply from 7

August 2009, with the exception of the transposition of Articles

8(3) and 10 of the said Commission Regulation (EC) 595/2009,

which shall apply from 7 August 2009, and the transposition of

points 1(a)(i), 1(b)(i), 2(a), 3(a)(i), 3(b)(i), 3(c)(i), 3(d)(i) and

3(e)(i) of Annex II of the said Commission Regulation (EC)

595/2009, which shall apply from 31 December 2013; and

(i)

Commission Regulation (EC) 631/2009 on detailed

rules for the implementation of Annex I to Regulation 1 of

Commission Regulation (EC) 78/2009 on the type-approval of

motor vehicles with regard to the protection of pedestrians and

other vulnerable road users; the provisions of Commission

Regulation (EC) 631/2009 are transposed in Schedule XXII of

the principal regulations, and such transposed provisions shall

be deemed to have entered into force on 10 August 2009.

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Schedule Ii — EC Type-Approval of Motor Vehicles and their Trailers Open official source

" SCHEDULE III

[Regulations 3, 6(2) and (3) and 9(6)]

Information document for the purpose of EC type-approval of vehicles

(For explanatory notes, please refer to last page of Schedule I)

PART I

The following information shall be supplied in triplicate and include a list of contents. Any drawings

shall be supplied in appropriate scale and in sufficient detail on size A4, or on a folder of A4 format.

Photographs, if any, shall show sufficient detail.

A: Categories M and N

0. GENERAL

Make trade name of manufacturer: ....................................................................

Type: ....................................................................................................................................................

Commercial name(s) (if available): .....................................................................................

Means of identification of type, if marked on the vehicle ( b ): ..........................................

Location of that marking: ...............................................................................................

Category of vehicle ( c ): ......................................................................................

Classification(s) according to the dangerous goods which the vehicle is intended to

transport: ..........................................................................................................................

Name and address of manufacturer: ..............................................................................

Address(es) of assembly plant(s): ........................................................................................

Name and address of the manufacturer’s representative (if any): ................................

1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE

Photographs and/or drawings of a representative vehicle: ...........................................

Number of axles and wheels: ............................................................................................

Number and position of steered of axles: .........................................................................

Powered axles (number, position, interconnection): .....................................................

Chassis (if any) (overall drawing): .................................................................................

Position and arrangement of the engine: .....................................................................

Hand of drive: left/right ( 1 )

Vehicle is equipped to be driven in right/left ( 1 ) hand traffic

VER|JONI ELETTRONIKA

MASSES AND DIMENSIONS ( f ) ( g )

2. (in kg and mm) (Refer to drawing where applicable)

Wheelbase(s) (fully loaded) ( g1 )

Vehicles with three or more axles

Axle spacing between consecutive axles going from the foremost to the rearmost

axle: ..................................................................................................................................

Total axle spacing: ..........................................................................................................

Track of each steered axle ( g4 ): .........................................................................................

Track of all other axles ( g4 ): ...............................................................................................

Range of vehicle dimensions (overall)

For chassis without bodywork

Length ( g5 ): ......................................................................................................................

Maximum permissible length: ........................................................................................

Minimum permissible length: ........................................................................................

Width ( g7 ): .......................................................................................................................

Maximum permissible width: ........................................................................................

Minimum permissible width: .........................................................................................

Height (in running order) ( g8 ) (for suspensions adjustable for height, indicate normal

running position)

For chassis with bodywork

Length ( g5 ): ...................................................................................................

Length of the loading area: ................................................................................................

Width ( g7 ): .......................................................................................................................

Thickness of the walls (in the case of vehicles designed for controlled-temperature

transport of goods): .............................................................................................................

Height (in running order) ( g8 ) (for suspensions adjustable for height, indicate

normal running position): ...............................................................................................

Mass in running order

Mass of the vehicle with bodywork and, in the case of a towing vehicle of a

category other than M1, with coupling device, if fitted by the manufacturer, in

running order, or mass of the chassis or chassis with cab, without bodywork and/or

coupling device, if the manufacturer does not fit the bodywork and/or coupling

device (including liquids, tools, spare wheel, if fitted, and driver and, for buses and

coaches, a crew member if there is a crew seat in the vehicle) ( h ) (maximum and

minimum for each variant): ............................................................................................

VER|JONI ELETTRONIKA

Distribution of this mass among the axles and, in the case of a semi-trailer or centre-

axle trailer, load on the coupling point (maximum and minimum for each variant)

Minimum mass of the completed vehicle as stated by the manufacturer, in the case

of an incomplete vehicle: ...................................................................................................

Technically permissible maximum laden mass stated by the manufacturer ( i ) ( 3 )

Distribution of this mass among the axles and, in the case of a semi-trailer or centre-

axle trailer, load on the coupling point ( 3 ): .......................................................................

Technically permissible maximum mass on each axle: .............................................

Technically permissible maximum mass on each axle group: ...............................

Technically permissible maximum towable mass of the motor vehicle in case of

Drawbar trailer: ...................................................................................................................

Semi-trailer: ........................................................................................................................

Centre-axle trailer: .................................................................................................................

Technically permissible maximum mass of the combination ( 3 ): ...............................

Maximum mass of unbraked trailer

Technically permissible maximum static vertical load/mass of the vehicle’s

coupling point

Of the motor vehicle: ...........................................................................................

Intended registration/in service maximum permissible masses (optional: where these

values are given, they shall be verified in accordance with the requirements of Annex

IV to Directive 97/27/EC): .................................................................................................

Intended registration/in service maximum permissible laden mass (several entries

possible for each technical configuration ( 5 )): ............................................................

Intended registration/in service maximum permissible mass on each axle and, in

the case of a semitrailer or centre-axle trailer, intended load on the coupling point

stated by the manufacturer if lower than the technically permissible maximum

mass on the coupling point (several entries possible for each technical

configuration ( 5 ): ..........................................................................................................

Intended registration/in service maximum permissible mass on each axle group

(several entries possible for each technical configuration ( 5 )): ....................................

Intended registration/in service maximum permissible towable mass (several entries

possible for each technical configuration ( 5 )): .............................................................

Intended registration/in service maximum permissible mass of the combination

(Several entries possible for each technical configuration ( 5 )): ...................................

POWER PLANT ( k )

3. VER|JONI ELETTRONIKA

Manufacturer of the engine: ........................................................................................

Manufacturer’s engine code (as marked on the engine or other means of

identification): .................................................................................................................

Internal combustion engine

Working principle: positive ignition/compression ignition ( l )

Cycle: four stroke/two stroke/rotary ( l )

Number and arrangement of cylinders: .......................................................................

Engine capacity ( m ): ............................................ cm 3

Normal engine idling speed ( 2 ): ............................ min -1

Maximum net power ( n ) ............... kW at ........... min -1 (manufacturer’s declared

value)

Light-duty vehicles: Diesel/Petrol/LPG/NG or Biomethane/Ethanol (E 85)/

Biodiesel/Hydrogen ( 1 ) ( 6 )

Heavy-duty vehicles: Diesel/Petrol/LPG/NG-H/NG-L/NG-HL/Ethanol ( 1 ) ( 6 )

Vehicle fuel type: Mono fuel, Bi fuel, Flex fuel ( 1 )

Maximum amount of biofuel acceptable in fuel (manufacturer's declared value)

................... % by volume

Fuel tank(s)

Service fuel tank(s)

Number and capacity of each tank: ................................................................................

Reserve fuel tank(s)

Number and capacity of each tank: ................................................................................

Fuel feed

By carburettor(s): yes/no ( 1 )

By fuel injection (compression ignition only): yes/no ( 1 )

Working principle: direct injection/pre-chamber/swirl chamber ( 1 )

By fuel injection (positive ignition only): yes/no ( 1 )

Cooling system: liquid/air ( 1 )

Intake system

Pressure charger: yes/no ( 1 )

Intercooler: yes/no ( 1 )

Exhaust system

VER|JONI ELETTRONIKA

Type, marking of exhaust silencer(s): ......................................................................

Where relevant for exterior noise, reducing measures in the engine compartment

and on the engine: ......................................................................................................

Location of the exhaust outlet: ..................................................................................

Measures taken against air pollution

Additional anti-pollution devices (if any, and if not covered by another heading)

Catalytic converter: yes/no ( 1 )

Regeneration systems/method of exhaust after-treatment systems, description: .................

Consumable reagents: yes/no ( 1 )

Type and concentration of reagent needed for catalytic action: ..............................................

Oxygen sensor: yes/no ( 1 )

Air intake injection: yes/no ( 1 )

Exhaust gas recirculation: yes/no ( 1 )

Evaporative emissions control system: yes/no ( 1 )

Particulate trap: yes/no ( 1 )

On-board-diagnostic (OBD) system: yes/no ( 1 )

Other systems (description and operation): ...................................................................

Torque limiter: yes/no ( 1 )

Location of the absorption coefficient symbol (compression ignition engines only)

LPG fuelling system: yes/no ( 1 )

NG fuelling system: yes/no ( 1 )

Electric motor

Type (winding, excitation): .................................................................................................

Maximum hourly output: ................................. kW

Operating voltage: ......................................... V

Battery

Position: ..........................................................................................................................................

Engine or motor combination

Hybrid electric vehicle: yes/no ( 1 )

Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging: ( 1 )

VER|JONI ELETTRONIKA

Lubricant temperature

minimum: ...................................... K

maximum: ....................................... K

TRANSMISSION ( p )

4. Type (mechanical, hydraulic, electric, etc.): .......................................................................

Gearbox

Type (manual/automatic/CVT (continuously variable transmission)) ( 1 )

Gear ratios

Internal gearbox

Final drive ratio(s)

ratios (ratios of

(ratio of gearbox

Gear

engine to gearbox

output shaft to

Total gear ratios

output shaft

driven wheel

revolutions)

Maximum for CVT

Minimum for CVT

Reverse

Maximum vehicle speed (in km/h) ( q )

Tachograph: yes/no ( 1 )

Approval mark: ..............................................................................................................................

5. AXLES

Description of each axle: ....................................................................................................

Make: ...............................................................................................................................................

Type: ....................................................................................................................................................

Position of retractable axle(s): ...............................................................................................

Position of loadable axle(s): ..................................................................................................

6. SUSPENSION

Type and design of the suspension of each axle or wheel: ..............................................

Level adjustment: yes/no/optional ( 1 )

Air-suspension for driving axle(s): yes/no ( 1 )

Suspension of driving axle equivalent to air-suspension: yes/no ( 1 )

Air-suspension for non-driving axle(s): yes/no ( 1 )

VER|JONI ELETTRONIKA

Suspension of non-driving axle(s) equivalent to air-suspension: yes/no ( 1 )

Tyre/Wheel combination(s)

(a) for tyres indicate size designation, load-capacity index, speed category symbol,

rolling resistance in accordance with ISO 28580 (where applicable) ( r );

(b) for wheels indicate rim size(s) and off-set(s)

Axles

Axle 1: ..................................................................................................................................

Axle 2: .....................................................................................................................................

etc.

Spare wheel, if any: ...................................................................................................

Upper and lower limits of rolling radii

Axle 1: ..........................................................................................................................

Axle 2: .............................................................................................................................................

etc.

7. STEERING

Transmission and control

Type of steering transmission (specify for front and rear, if applicable): ..................

Linkage to wheels (including other than mechanical means; specify for front and

rear, if applicable): ...........................................................................................................

Method of assistance, if any: ..........................................................................................

8. BRAKES

Anti-lock braking system: yes/no/optional ( 1 )

Brief description of the braking system according to item 1.6 of the Addendum to

Appendix 1 of Annex IX to Directive 71/320/EEC: ..................................................

Particulars of the type(s) of endurance braking system(s): ........................................

9. BODYWORK

Type of bodywork using the codes set out in Part C of Annex II: .............................

Occupant doors, latches and hinges

Door configuration and number of doors: ..................................................................

Devices for different vision

Mirrors (state for each mirror): ....................................................................................

Make: .................................................................................................................................................................

VER|JONI ELETTRONIKA

Type-approval mark: ...................................................................................................

Variant: .........................................................................................................................

Optional equipment which may affect the rearward field of vision: ............................

Devices for indirect vision other than mirrors: ..............................................................

Type and description of the device: .............................................................................

Interior arrangement

Seats

Number of seating positions ( s ): ..............................................................................................

Location and arrangement: ..........................................................................................

Seat(s) designated for use only when the vehicle is stationary: .................................

Type(s) of head restraints: integrated/detachable/separate ( 1 )

Type-approval number(s), if available: .......................................................................

Gas used as refrigerant in the air-conditioning system: ..............................................

The air-conditioning system is designed to contain fluorinated greenhouse gases

with a global warming potential higher than 150: yes/no ( 1 )

Nature and position of supplementary restraint systems (indicate yes/no/optional)

(L = left-hand side, R = right-hand side, C = centre))

Front airbag

Side airbag

Belt pre-

loading device

{

First row of seats

L

C

R

{

L

Second row of seats ( * )

C

R

(*) The table may be extended as necessary for vehicles with more than two rows of

seats or if there are more than three seats across the width of the vehicle.

Statutory plates

Photographs and/or drawings of the locations of the statutory plates and

inscriptions and of the vehicle identification number: ...............................................

Photographs and/or drawings of the statutory plate and inscriptions (completed

example with dimensions): ..........................................................................................

Photographs and/or drawings of the vehicle identification number (completed

example with dimensions)

The meaning of characters in the second section and, if applicable, in the third

section used to comply with the requirements of section 5.3 of ISO Standard 3779-

VER|JONI ELETTRONIKA

1983 shall be explained: ...............................................................................................

If characters in the second section are used to comply with the requirements of

section 5.4 of ISO Standard 3779-1983 these characters shall be indicated: .............

Front under-run protection

Presence: yes/no/incomplete ( 1 )

Pedestrian protection

A detailed description, including photographs and/or drawings, of the vehicle with

respect to the structure, the dimensions, the relevant reference lines and the

constituent materials of the frontal part of the vehicle (interior and exterior)

including detail of any active protection system installed

Frontal protection systems

General arrangement (drawings or photographs) indicating the position and

attachment of the frontal protection systems

Complete details of fittings required and full instructions, including torque

requirements, for fitting

11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND

SEMI-TRAILERS

Class and type of the coupling device(s) fitted or to be fitted: ...................................

Instructions for attachment of the coupling type to the vehicle and photographs or

drawings of the fixing points at the vehicle as stated by the manufacturer; additional

information, if the use of the coupling type is restricted to certain variants or

versions of the vehicle type: .........................................................................................

Information of the fitting of special towing brackets or mounting plates: .................

Type-approval number(s): ....................................................................................................

12. MISCELLANEOUS

Vehicle equipped with a 24 GHz short-range radar equipment: yes/no ( 1 ).

13. SPECIAL PROVISIONS FOR BUSES AND COACHES

Class of vehicle: Class I / Class II / Class III / Class A / Class B ( 1 )

Chassis types where the type-approved bodywork can be installed

(manufacturer(s), and vehicle(s) types): .....................................................................

Number of passengers (seated and standing)

Total (N): ......................................................................................................................

Upper deck (N a ) ( 1 ) ......................................................................................................

Lower deck (N b ) ( 1 ): ....................................................................................................

Number of passengers (seated)

VER|JONI ELETTRONIKA

Total (A): ......................................................................................................................

Upper deck (A a ) ( 1 ): .....................................................................................................

Lower deck (A b ) ( 1 ): ....................................................................................................

Number of passengers (seated)

Total (A): ......................................................................................................................

Upper deck (Aa) ( 1 ): .....................................................................................................

Lower deck (Ab) ( 1 ): ....................................................................................................

Number of wheelchair positions for category M 2 and M 3 vehicles: .........................

16. ACCESS TO VEHICLE REPAIR AND MAINTENANCE INFORMATION

Address of principal website for access to vehicle repair and maintenance

information: ..................................................................................................................

B: For category O

0. GENERAL

Make (trade name of manufacturer): ...........................................................................

Type: .............................................................................................................................

Commercial name(s) (if available): .............................................................................

Means of identification of type, if marked on the vehicle ( b ): ...................................

Location of that marking: ............................................................................................

Category of vehicle ( c ): ................................................................................................

Classification(s) according to the dangerous goods which the vehicle is intended to

transport: .......................................................................................................................

Name and address of manufacturer: ............................................................................

Name(s) and address(es) of assembly plant(s): ..........................................................

Name and address of the manufacturer’s representative (if any): .............................

1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE

Photographs and/or drawings of a representative vehicle: .........................................

Number of axles and wheels: .......................................................................................

Number and position of axles with twin wheels: ........................................................

Number and position of steered axles: ........................................................................

Chassis (if any) (overall drawing): ..............................................................................

MASSES AND DIMENSIONS ( f ) ( g )

2. VER|JONI ELETTRONIKA

(in kg and mm) (Refer to drawing where applicable)

Wheelbase(s) (fully loaded) ( g1 )

Two-axle vehicles: .......................................................................................................

Vehicles with three or more axles

Axle spacing between consecutive axles going from the foremost to the rearmost

axle: ...............................................................................................................................

Total axle spacing: .......................................................................................................

Track of each steered axle ( g4 ): ...................................................................................

Track of all other axles ( g4 ): .........................................................................................

Range of vehicle dimensions (overall)

For chassis without bodywork

Length ( g5 ): ...................................................................................................................

Maximum permissible length: .....................................................................................

Minimum permissible length: .....................................................................................

In the case of trailers, maximum permissible drawbar length ( g6 ): .............................

Width ( g7 ): ....................................................................................................................

Maximum permissible width: ......................................................................................

Minimum permissible width: ......................................................................................

For chassis with bodywork

Length ( g5 ): ...................................................................................................................

Length of the loading area: ..........................................................................................

In the case of trailers, maximum permissible drawbar length ( g6 ): ............................

Width ( g7 ): ....................................................................................................................

Thickness of the walls (in the case of vehicles designed for controlled-temperature

transport of goods): ......................................................................................................

Height (in running order) ( g8 ) (for suspension adjustable for height, indicate

normal running position): ............................................................................................

Mass in running order

Mass of the vehicle with bodywork and, in the case of a towing vehicle of a

category other than M 1 , with coupling device, if fitted by the manufacturer, in

running order, or mass of the chassis or chassis with cab, without bodywork and/or

coupling device if the manufacturer does not fit the bodywork and/or coupling

device (including liquids, tools, spare wheel, if fitted, and driver and, for buses and

VER|JONI ELETTRONIKA

coaches, a crew member if there is a crew seat in the vehicle) ( h ) (maximum and

minimum for each variant): .........................................................................................

Distribution of this mass among the axles and, in the case of a semi-trailer or

centre-axle trailer, load on the coupling point (maximum and minimum for each

variant): .........................................................................................................................

Minimum mass of the completed vehicle as stated by the manufacturer, in the

case of an incomplete vehicle

Technically permissible maximum laden mass stated by the manufacturer ( l ) ( 3 )

Distribution of this mass among the axles, and in the case of a semi-trailer or

centre-axle trailer, load on the coupling point ( 3 ): ......................................................

Technically permissible maximum mass on each axle: ........................................

Technically permissible maximum mass on each axle group: .............................

Technically permissible maximum static vertical load/mass on the vehicle’s

coupling point

Of the semi-trailer or centre-axle trailer: .....................................................................

Intended registration/in service maximum permissible masses (optional

where these values are given, they shall be verified in accordance with the

requirements of Annex IV to Directive 97/27/EC): ...................................................

Intended registration/in service maximum permissible laden mass (several entries

possible for each technical configuration ( 5 )): ............................................................

Intended registration/in service maximum permissible mass on each axle and, in

the case of a semi-trailer or centre-axle trailer, intended load on the coupling point

stated by the manufacturer if lower than the technically permissible maximum

mass on the coupling point (several entries possible for each technical

configuration ( 5 )): .........................................................................................................

Intended registration/in service maximum permissible mass on each axle group

(several entries possible for each technical configuration ( 5 )): ..................................

Intended registration/in service maximum permissible towable mass (several

entries possible for each technical configuration ( 5 )): ................................................

Intended registration/in service maximum permissible mass of the combination

(several entries possible for each technical configuration ( 5 )): ..................................

4. TRANSMISSION

Maximum vehicle design speed (in km/h) ( q )

5. AXLES

Description of each axle: .............................................................................................

Make: ............................................................................................................................

VER|JONI ELETTRONIKA

Type: .............................................................................................................................

Position of retractable axle(s): .....................................................................................

Position of loadable axle(s): ........................................................................................

6. SUSPENSION

Type and design of the suspension of each axle or wheel: .........................................

Level adjustment: yes/no/optional ( 1 )

Tyre/wheel combination(s)

(a) for tyres indicate size designation, load-capacity index, speed category symbol,

rolling resistance in accordance with ISO 28580 (where applicable) ( r );

(b) for wheels indicate rim size(s) and off-set(s)

Axles

Axle 1: ..........................................................................................................................

Axle 2: ..........................................................................................................................

etc.

Spare wheel, if any: ......................................................................................................

Upper and lower limit of rolling radii

Axle 1: ..........................................................................................................................

Axle 2: ..........................................................................................................................

etc.

7. STEERING

Transmission and control

Type of steering transmission (specify for front and rear, if applicable): ..................

Linkage to the wheels (including other than mechanical means; specify for front

and rear, if applicable): .................................................................................................

Method of assistance, if any: .......................................................................................

8. BRAKES

Antilock braking system: yes/no/optional ( 1 )

Brief description of the braking system, according to item 1.6 of the addendum to

Appendix 1 of Annex IX to Directive 71/320/EEC): .................................................

9. BODYWORK

Type of bodywork using the codes defined in Part C of Annex II: ...........................

Statutory plates

VER|JONI ELETTRONIKA

Photographs and/or drawings of the locations of the statutory plates and

inscriptions and of the vehicle identification number: ...............................................

Photographs and/or drawings of the statutory plate and inscriptions (complete

example with dimensions): ..........................................................................................

Photographs and/or drawings of the vehicle identification number (complete

example with dimensions): ..........................................................................................

The meaning of characters in the second section and, if applicable, in the third

section used to comply with the requirements of section 5.3 of ISO Standard 3779-

1983 shall be indicated: ................................................................................................

If characters in the second section are used to comply with the requirements of

section 5.4 of ISO Standard 3779-1983 these characters shall be indicated: ............

11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND

SEMI-TRAILERS

Class and type of the coupling device(s) fitted or to be fitted: ...................................

Type-approval number(s): ...........................................................................................

PART II

Matrix showing the combinations of the entries listed in Part I

within the versions and variants of the vehicle type

All

Version 1

Version 2

Version 3

Version n

(a) A separate matrix shall be compiled for each variant within the type.

(b) Entries for which there are no restrictions on their combination within a variant shall be

listed in the column headed “all”.

(c) The above information may be presented in an alternative layout or merged with the

information supplied in Part I.

(d) Each variant and each version shall be identified by an alphanumerical code consisting

of a combination of letters and numbers, which shall also be indicated in the certificate of

conformity (Annex IX) of the vehicle concerned.

(e) Variant(s) which fall(s) under Annex XI shall be identified by a specific alphanumerical

PART III

Type-approval numbers

Supply the information required by the following table in respect of the applicable subjects

for this vehicle in Schedule IV or Schedule XI. (All relevant approvals for each subject shall be

included). However, information in respect of components need not be given here so long as such

VER|JONI ELETTRONIKA

information is included in the approval certificate relating to the installation prescriptions).

Member State or

Type-approval

Contracting Party ( * )

number or tst

Variant(s)/

Subject

issuing the type-

Extension date

report number

Version(s)

approval ( ** ) or test

( *** )

report ( *** )

(*)

Contracting Parties to the Revised 1958 Agreement.

(**) To be indicated if not obtainable from the type-approval number.

(***) To be indicated when the manufacturer applies the provisions of Article 9(6) of the

Directive. In such a case, the applied regulatory act shall be specified in the second column.

Signed: ..........................................................................

Position in company: ......................................................

Date: ................................... ".

VER|JONI ELETTRONIKA

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 3 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Schedules I, III, IV, VI, VII, IX, XI, XV, XXI and XXII of Substitutes

the principal regulations shall be substituted by the schedules set out various

Schedules to the

in Schedules I, II, III, IV, V, VI, VII, VIII, IX and X of these principal

regulations.

regulations respectively.

VER|JONI ELETTRONIKA

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Schedule Iii — EC Type-Approval of Motor Vehicles and their Trailers Open official source

" SCHEDULE IV

[Regulations 3, 6(2) and (3), 9(1)(a) and (2), 10(1) and (2), 11(1), 12(2)(b), 20(1), 21(1), 25(3),

28(1), 29(1) and (3), 30(1), 32(2), (3)(a) and (b) and (4), and 35(3)]

LIST OF REGULATORY ACTS SETTING THE REQUIREMENTS

FOR THE PURPOSE OF EC TYPEAPPROVALOF VEHICLES

PART I

List of regulatory acts for EC type-approval of vehicles produced in unlimited series

Subject

Regulatory act

Official Journal

Applicability

reference

1 Permissible sound level

Directive

L 42, 23.2.1970,

X

70/157/EEC

p. 16.

2 Emissions

Directive

L 76, 6.4.1970,

X

70/220/EEC

p. 1.

X( 9 ) X( 9 )

2a Emissions (Euro 5 and 6) R e g u l a t i o n L 171, 29.6.2007,

light-duty vehicles/

(EC) 715,2007 p. 1.

access to information

3 Fuel tanks/rear

Directive

L 76, 6.4.1970,

X

protective devices

70/221/EEC

p. 23.

4 Rear registration plate

Directive

L 76, 6.4.1970,

X

space

70/222/EEC

p. 25.

5 Steering effort

Directive

L 133, 18.6.1970,

X

70/311/EEC

p. 10.

6 Door latches and hinges

Directive

L 176, 10.8.1970,

X

70/387/EEC

p. 5.

7 Audible warning

Directive

L 176, 10.8.1970,

X

70/388/EEC

p. 12.

8 Indirect vision devices

Directive

L 25, 29.1.2004, p.

X

2003/97/EC

1. 9 Braking

Directive

L 202, 6.9.1971, p.

X

71/320/EEC

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Schedule Iv — EC Type-Approval of Motor Vehicles and their Trailers Open official source

" SCHEDULE VI

[Regulation 9(7)]

MODELS OF THE TYPE-APPROVAL CERTIFICATE

MODEL A

(to be used for type-approval of a vehicle)

Maximum format: A4 (210 × 297 mm)

EC VEHICLE TYPE-APPROVAL CERTIFICATE

Stamp of

type- approval authority

Communication concerning

Of a type of

of EC type-approval ( 1 )

- complete vehicle ( 1 )

extension of EC type-approval ( 1 )

- completed vehicle ( 1 )

refusal of EC type-approval ( 1 )

- incomplete vehicle ( 1 )

withdrawal of EC type-approval ( 1 )

- vehicle with complete and incomplete variants ( 1 )

- vehicle with completed and incomplete variants ( 1 )

with regard to Directive 2007/46/EC as last amended by Directive ............/....../EC /

Regulation (EC) No. ............../............... ( 1 )

EC type-approval number

Reason for extension

SECTION I

0.1.

Make (trade name of manufacturer)

0.2.

Type

Commercial name(s) ( 2 )

0.2.1.

0.3.

Means of identification of type, if marked on the vehicle

0.3.1.

Location of that marking

Category of vehicle ( 3 )

0.4.

Name and address of manufacturer of the complete vehicle ( 1 )

0.5.

Name and address of manufacturer of the base vehicle ( 1 ) ( 4 )

Name and address of manufacturer of the latest built stage of the incomplete vehicle ( 1 ) ( 4 )

VER|JONI ELETTRONIKA

Name and address of manufacturer of the completed vehicle ( 1 ) ( 4 )

0.8.

Name(s) and address(es) of assembly plant(s)

0.9.

Name and address of the manufacturer’s representative (if any)

(1)

Delete where not applicable.

(2)

If not available at the time of granting the type-approval, this item shall be completed at the latest when the vehicle

is introduced on the market.

(3)

As defined in Schedule II.A.

(4)

See side 2.

SECTION II

The undersigned hereby certifies the accuracy of the manufacturer’s description in the attached

information document of the vehicle(s) described above ((a) sample(s) having been selected by the EC type-

approval authority and submitted by the manufacturer as prototype(s) of the vehicle type) and that the attached

test results are applicable to the vehicle type.

For complete and completed vehicles/variants ( 1 )

1. The vehicle type meets/does not meet ( 1 ) the technical requirements of all the relevant regulatory acts as

prescribed in Annex IV and Annex XI ( 1 ) ( 2 ) to Directive 2007/46/EC.

For incomplete vehicles/variants ( 1 )

2. The vehicle type meets/does not meet ( 1 ) the technical requirements of the regulatory acts listed in the

table on side 2.

The approval is granted/refused/withdrawn ( 1 ).

3.

4. The approval is granted in accordance with regulation 20 and the validity of the approval is

thus limited to dd/mm/yy.

(Place)

(Signature)

(Date)

Attachments

Information package.

Test results (see Schedule VIII).

Name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign

certificates of conformity and a statement of their position in the company.

NB: If this model is used for type-approval pursuant to regulations 20, 22 or 23, it may not bear the

heading ‘EC Vehicle Type-Approval Certificate’, except

-

in the case mentioned in regulation 20 where the Commission has decided to allow a Member

State to grant a type-approval in accordance with the Directive,

-

in the case of vehicles of the category M 1 , type-approved according to the procedure prescribed

in regulation 22.

(1)

Delete where not applicable.

(2)

See side 2.

VER|JONI ELETTRONIKA

Side 2

This EC type-approval is, where incomplete and completed vehicles, variants or versions are concerned,

based on the approval(s) for incomplete vehicles listed below

Stage 1: Manufacturer of the base vehicle

EC type-approval number

Dated

Applicable to variants or versions (as appropriate)

Stage 2: Manufacturer

EC type-approval number

Dated

Applicable to variants or versions (as appropriate)

Stage 3: Manufacturer

EC type-approval number

Dated

Applicable to variants or versions (as appropriate)

In the case where the approval includes one or more incomplete variants or versions (as appropriate), list

those variants or versions (as appropriate) which are complete or completed.

List of requirements applicable to the approved incomplete vehicle type, variant or version (as

appropriate, taking account of the scope and latest amendment to each of the regulatory acts listed

below).

Item

Subject

Regulatory act

Last amended

Applicable to

reference

variants

(List only subjects for which a EC type-approval exists.)

In the case of special purpose vehicles, exemptions granted or special provisions applied pursuant to

Schedule XI and exemptions granted pursuant to regulation 20

Regulatory act reference

Item number

Kind of approval and

Applicable to variant or,

nature of exemption

if need be, to version

VER|JONI ELETTRONIKA

Appendix 1

List of regulatory acts to which the type of vehicle complies

(to be filled in only in the case of type-approval in accordance with regulation 6(3)

Regulatory act reference ( 1 )

Subject

As amended

Applicable to

by

versions

1. Permissible sound level

Directive 70/157/EEC

2. Emissions

Directive 70/220/EEC

2a.

Emissions (Euro 5 and 6) light-duty

Regulation (EC) 715/2007

vehicles / access to information

3. Fuel tanks/Rear protective devices

Directive 70/221/EEC

4. Rear registration plate space

Directive 70/222/EEC

5. Steering effort

Directive 70/311/EEC

6. Door latches and hinges

Directive 70/387/EEC

7. Audible warning

Directive 70/388/EEC

8. Rear visibility

Directive 71/127/EEC

8A. Indirect vision devices

Directive 2003/97/EC

9. Braking

Directive 71/320/EEC

10. Radio interference (electromagnetic

Directive 72/245/EEC

compatibility)

11. Diesel smoke

Directive 72/306/EEC

12. Interior fittings

Directive 74/60/EEC

13. Anti-theft and immobiliser

Directive 74/61/EEC

14. Protective steering

Directive 74/297/EEC

15. Seat strength

Directive 74/408/EEC

16. Exterior projections

Directive 74/483/EEC

17. Speedometer and reverse gear

Directive 75/443/EEC

18. Plates (statutory)

Directive 76/114/EEC

19. Seat belt anchorages

Directive 76/115/EEC

20. Installation of lighting and light signalling Directive 76/756/EEC

devices

21. Retro reflectors

Directive 76/757/EEC

22. End-outline, front-position (side), rear-

Directive 76/758/EEC

position (side), stop, side marker, daytime

running lamps

23. Direction indicators

Directive 76/759/EEC

24. Rear registration plate lamps

Directive 76/760/EEC

25. Headlamps (including bulbs)

Directive 76/761/EEC

26. Front fog lamps

Directive 76/762/EEC

27. Towing hooks

Directive 77/389/EEC

28. Rear fog lamps

Directive 77/538/EEC

29. Reversing lamps

Directive 77/539/EEC

30. Parking lamps

Directive 77/540/EEC

31. Seat belts and restraint systems

Directive 77/541/EEC

32. Forward vision

Directive 77/649/EEC

33. Identification of controls tell-tales and

Directive 78/316/EEC

indicators

VER|JONI ELETTRONIKA

Regulatory act reference ( 1 ) As amended

Subject

Applicable to

by

versions

34. Defrost/Demist

Directive 78/317/EEC

35. Wash/Wipe

Directive 78/318/EEC

36. Heating systems

Directive 2001/56/EC

37. Wheel guards

Directive 78/549/EEC

38. Head restraints

Directive 78/932/EEC

39. CO 2 emissions/Fuel consumption

Directive 80/1268/EEC

40. Engine power (shall be repealed with effect

Directive 80/1269/EEC

from 31st Dec 2013)

41. Emissions (Euro IV and V) heavy duty

Directive 2005/85/EC

vehicles (shall be repealed with effect from

31st Dec 2013)

41a. Emissions (Euro VI) heavy duty vehicles / Regulation (EC) 595/2009

access to information (shall apply from 13

Dec 2013)

42. Lateral protection

Directive 89/297/EEC

43. Spray-suppression systems

Directive 91/226/EEC

44. Masses and dimensions (cars)

Directive 92/21/EEC

45. Safety glazing

Directive 92/22/EEC

46. Tyres

Directive 92/23/EEC

47. Speed limitation devices

Directive 92/24/EEC

48. Masses and dimensions (other than

Directive 97/27/EC

vehicles referred to in item 44)

49. External projections of cabs

Directive 92/114/EEC

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 5 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

..................

VER|JONI ELETTRONIKA

Details of any devices designed to influence fuel economy (if not covered by other

items): ...................................................................................................................................

LPG fuelling system: yes/no ( 1 )

Type-approval number according to Directive 70/221/EEC (when the Directive will be

amended to cover tanks for gaseous fuels) or approval number according to UNECE

Regulation No 67 (OJ L 76, 6.4.1970, p. 34): .............................................................................

Electronic engine management control unit for LPG fuelling

Make(s): .................................................................................................................................................................

Type(s): ..............................................................................................................

Emission-related adjustment possibilities: ...........................................................................

Further documentation

Description of the safeguarding of the catalyst at switch-over from petrol to LPG or

back: .....................................................................................................................................

System lay-out (electrical connections, vacuum connections compensation hoses,

etc.): ......................................................................................................................................

Drawing of the symbol: ......................................................................................................

NG fuelling system: yes/no ( 1 )

Type-approval number according to Directive 70/221/EEC (when the Directive will be

amended to cover tanks for gaseous fuels) or approval number according to UNECE

Regulation No 110 (OJ L 72, 14.3.2008, p. 113): .................................................................................

Electronic engine management control unit for NG fuelling

Make(s): .................................................................................................................................................................

Type(s): ........................................................................................................................................................

Emission-related adjustment possibilities: ...........................................................................

Further documentation

Description of the safeguarding of the catalyst at switch-over from petrol to NG or

back: ..................................................................................................................................

System lay-out (electrical connections, vacuum connections compensation hoses,

etc.): ......................................................................................................................................

Drawing of the symbol: ......................................................................................................

Specific information related to gas fuelled engines for heavy-duty vehicles (in the case of

systems laid out in a different manner, supply equivalent information)

Fuel: LPG/NG-H/NG-L/NG-HL ( 1 )

Pressure regulator(s) or vaporiser/pressure regulator(s) ( 1 )

VER|JONI ELETTRONIKA

Make(s): .......................................................................................................................................................

Type(s): .........................................................................................................................................................

Number of pressure reduction stages: .....................................................................................................

Pressure in final stage

minimum: ............................ kPa - maximum: ...................................kPa

Number of main adjustment points: ........................................................................................................

Number of idle adjustment points: ..........................................................................................................

Type-approval number: .............................................................................................................................

Fuelling system: mixing unit/gas injection/liquid injection/direct injection ( 1 )

Mixture strength regulation: ......................................................................................................................

System description and/or diagram and drawings: ...............................................................................

Type-approval number: ............................................................................................................................

Mixing unit

Number: .......................................................................................................................................................

Make(s): .......................................................................................................................................................

Type(s): .........................................................................................................................................................

Location: .......................................................................................................................................................

Adjustment possibilities: ...........................................................................................................................

Type-approval number: .............................................................................................................................

Inlet manifold injection

Injection: single point/multipoint ( 1 )

Injection: continuous/simultaneously timed/sequentially timed ( 1 )

Injection equipment

Make(s): .......................................................................................................................................................

Type(s): .........................................................................................................................................................

Adjustment possibilities: ...........................................................................................................................

Type-approval number: .............................................................................................................................

Supply pump (if applicable)

Make(s): .......................................................................................................................................................

Type(s): .........................................................................................................................................................

VER|JONI ELETTRONIKA

Type-approval number: .............................................................................................................................

Injector(s) .....................................................................................................................................................

Make(s): .......................................................................................................................................................

Type(s): .........................................................................................................................................................

Type-approval number: .............................................................................................................................

Direct injection

Injection pump/pressure regulator ( 1 )

Make(s): .......................................................................................................................................................

Type(s): .........................................................................................................................................................

Injection timing: ..........................................................................................................................................

Type-approval number: .............................................................................................................................

Injector(s): ....................................................................................................................................................

Make(s): .......................................................................................................................................................

Type(s): .........................................................................................................................................................

Opening pressure or characteristic diagram( 2 ): .....................................................................................

Type-approval number: .............................................................................................................................

Electronic control unit (ECU)

Make(s): .......................................................................................................................................................

Type(s): .........................................................................................................................................................

Adjustment possibilities: ...........................................................................................................................

Software calibration number(s): ...............................................................................................................

NG fuel-specific equipment

Variant 1 (only in the case of approvals of engines for several specific fuel compositions)

Fuel composition

methane (CH4): basis: ..............% mole min. .....................% mole max. ......................% mole

ethane (C2H6): basis: ......................% mole min. ......................% mole max. ....................% mole

propane (C3H8): basis: ...................% mole min. ........................% mole max. .................% mole

butane (C4H10): basis: .........................% mole min. ..................% mole max. ..................% mole

C5/C5+: basis: ..................% mole min. ..........................% mole max. ........................% mole

oxygen (O 2 ): basis: ................% mole min. ........................ % mole max. .....................% mole

inert (N 2 , He, etc.): basis: ...........................% mole min. ...............% mole max. .................% mole

Injector(s)

VER|JONI ELETTRONIKA

3.2.17.8.1.2.1. Make(s): .......................................................................................................................................................

3.2.17.8.1.2.2. Type(s): .........................................................................................................................................................

Others (if applicable): .................................................................................................................................

Variant 2 (only in the case of approvals for several specific fuel compositions)

Electric motor

Type (winding, excitation): .......................................................................................................

Maximum hourly output: .......................... kW

Operating voltage: ........................ V

Battery

Number of cells: .....................................................................................................................

Mass: ............................. kg

Capacity: ............................... Ah (Amp-hours)

Position: .......................................................................................................................................

Engine or motor combination

Hybrid electric vehicle: yes/no ( 1 )

Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging: ( 1 )

Operating mode switch: with/without ( 1 )

Selectable modes

Pure electric: yes/no ( 1 )

Pure fuel consuming: yes/no ( 1 )

Hybrid modes: yes/no ( 1 ) (if yes, short description): .................................................................

Description of the energy storage device: (battery, capacitor, flywheel/generator)

Make(s): ..........................................................................................................................................

Type(s): ...........................................................................................................................................

Identification number: ...................................................................................................................

Kind of electrochemical couple: ...................................................................................................

Energy: ................ (for battery: voltage and capacity Ah in 2 h, for capacitor: J, .................)

Charger: on board/external/without ( 1 )

Electric motor (describe each type of electric motor separately)

Make: ...............................................................................................................................................

VER|JONI ELETTRONIKA

Type: ................................................................................................................................................

Primary use: traction motor/generator ( 1 )

When used as traction motor: single-/multimotors (number) ( 1 ): ............................................

Maximum power: ................................. kW

Working principle

Direct current/alternating current/number of phases: ................................................................

Separate excitation/series/compound ( 1 )

Synchronous/asynchronous ( 1 )

Control unit

Make(s): ..........................................................................................................................................

Type(s): ...........................................................................................................................................

Identification number: ...................................................................................................................

Power controller

Make: ...............................................................................................................................................

Type: ................................................................................................................................................

Identification number: ...................................................................................................................

Vehicle electric range .............. km according to Annex 7 of Regulation No 101): ...............

Manufacturer’s recommendation for preconditioning: .............................................................

CO 2 emissions/fuel consumption ( o ) (manufacturer’s declared value)

CO 2 mass emissions

CO 2 mass emissions (urban conditions): .................... g/km

CO 2 mass emissions (extra-urban conditions): ................... g/km

CO 2 mass emissions (combined): .................... g/km

Fuel consumption (provide details for each reference fuel tested)

Fuel consumption (urban conditions): ........................... 1/100 km/m 3 /100 km ( 1 )

Fuel consumption (extra-urban conditions): ....................... 1/100 km/m 3 /100 km ( 1 )

Fuel consumption (combined): .................... 1/100 km/m 3 /100 km ( 1 )

Temperatures permitted by the manufacturer

Cooling system

Liquid cooling Maximum temperature at outlet: ...................... K

VER|JONI ELETTRONIKA

Air cooling: .............................................................................................................................

Reference point: ......................................................................................................................

Maximum temperature at reference point: ........................... K

Maximum outlet temperature of the inlet intercooler: ........................... K

Maximum exhaust temperature at the point in the exhaust pipe(s) adjacent to the outer

flange(s) of the exhaust manifold or turbocharger: .............................. K

Fuel temperature

Minimum: ........... K - Maximum: .................... K

For diesel engines at injection pump inlet, for gas fuelled engines at pressure regulator

final stage

Lubricant temperature: Minimum: ..................... K - Maximum: .............................. K

Fuel pressure Minimum: …… kPa — maximum: …… kPa

At pressure regulator final stage, NG fuelled gas engines only.

Engine-driven equipment

Power absorbed by the auxiliaries needed for operating the engine as specified in and under the

operation conditions of Directive 80/1269/EEC, Annex I, Section 5.1.1.

Power absorbed (kW) at various engine speeds

Equipment

Idle

Low speed High speed Speed A Speed B Speed C Ref. speed

(*)

(**)

P(a) Auxiliaries

needed for

operating the

engine (to be

subtracted from

measured

engine power)

see Appendix 1,

Section 6.1.

(*) ESC test.

(**) ETC test only.

Lubrication system

Description of the system

Position of lubricant reservoir: ...........................................................................................

Feed system (by pump/injection into intake/mixing with fuel, etc.) ( 1 )

Lubricating pump

Make(s): .................................................................................................................................................................

Type(s): ........................................................................................................................................................

VER|JONI ELETTRONIKA

Mixture with fuel

Percentage: ...................................................................................................................................................

Oil cooler: yes/no ( 1 )

Drawing(s): ..................................................................................................................................................

or

Make(s): .................................................................................................................................................................

Type(s): ........................................................................................................................................................

TRANSMISSION ( p )

4. Drawing of the transmission: ..........................................................................................

Type (mechanical, hydraulic, electric, etc.): ...........................................................................

A brief description of the electrical/electronic components (if any): .................................

Moment of inertia of engine flywheel: ..............................................................................

Additional moment of inertia with no gear engaged: .......................................................

Clutch

Type: ............................................................................................................................................

Maximum torque conversion: ..................................................................................................

Gearbox

Type (manual/automatic/CVT (continuously variable transmission)) ( 1 )

Location relative to the engine: ..........................................................................................

Method of control: ...............................................................................................................

Gear ratios

Internal gearbox

Final drive ratio(s)

ratios (ratios of engine

(ratio of gearbox

Gear

Total gear ratios

to gearbox output

output shaft to driven

shaft revolutions)

wheel revolutions)

Maximum for CVT

(*)

(*) Continuously

variable transmission

Maximum vehicle speed (in km/h) ( q )

Speedometer

VER|JONI ELETTRONIKA

Method of operation and description of drive mechanism: ...........................................

Instrument constant: .........................................................................................................

Tolerance of the measuring mechanism (pursuant to item 2.1.3 of Annex II to Directive

75/443/EEC): ..........................................................................................................................

Overall transmission ratio (pursuant to item 2.1.2 of Annex II to Directive 75/443/

EEC) or equivalent data: .....................................................................................

Diagram of the speedometer scale or other forms of display: ........................................

Tachograph: yes/no ( 1 )

Approval mark: ................................................................................................................

Differential lock: yes/no/optional ( 1 )

5. AXLES

Description of each axle: ....................................................................................................

Make: .................................................................................................................................................................

Type: ....................................................................................................................................................

Position of retractable axle(s): ...................................................................................................

Position of loadable axle(s): ...................................................................................................

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Schedule V — EC Type-Approval of Motor Vehicles and their Trailers Open official source

" SCHEDULE VII

[Regulations 8(4), 19(3) and 21(3)

EC TYPE-APPROVAL CERTIFICATE NUMBERING SYSTEM ( 1 )

1. The EC type-approval number shall consist of four sections for whole vehicle type-approvals

and five sections for system, component, and separate technical unit type-approvals as detailed below. In all

cases, the sections shall be separated by the ‘*’ character.

The lower case letter ‘e’ followed by the distinguishing number of the Member

State issuing the EC type-approval

for Germany;

19 for Romania;

for France;

20 for Poland;

for Italy;

21 for Portugal;

for the Netherlands;

23 for Greece;

for Sweden;

24 for Ireland;

for Belgium;

26 for Slovenia;

for Hungary;

27 for Slovakia;

for the Czech Republic;

29 for Estonia;

for Spain;

32 for Latvia;

11 for the United Kingdom;

34 for Bulgaria;

12 for Austria;

36 for Lithuania;

13 for Luxembourg;

49 for Cyprus;

17 for Finland;

50 for Malta.

18 for Denmark;

The number of the base directive or regulation.

The number of the latest amending directive or regulation including implementing

acts applicable to the type-approval.

in the case of whole vehicle type-approvals, this means the latest directive or

regulation amending an Article (or Articles) of Directive 2007/46/EC;

in the case of whole vehicle type-approvals granted in accordance with

the procedure described in Article 22 of Directive 2007/46/EC, this

means the latest directive or regulation amending an Article (or Articles)

of Directive 2007/46/EC, except that the two first digits (e.g. 20) are

replaced by the letters KS in block capitals;

VER|JONI ELETTRONIKA

this means the latest directive or regulation containing the actual provisions with

which the system, component or technical unit conforms;

should a directive or regulation including their implementing acts

contain different technical prescriptions to be applied from specific

dates, Section 3 shall be followed with an alphabetical character to

clearly identify against which technical prescriptions the approval was

granted. When different vehicle categories are concerned, the character

may also refer to a specific vehicle category.

A four-digit sequential number (with leading zeros as applicable) for EC Whole

vehicle type-approvals, or four or five digits for type-approval pursuant to a separate

directive or regulation to denote the base type-approval number. The sequence shall

start from 0001 for each base directive or regulation.

A two-digit sequential number (with leading zeros if applicable) to denote the

extension. The sequence shall start from 00 for each base approval number.

2. In the case of a type-approval for a whole vehicle, Section 2 shall be omitted.

However, in the case of a national type-approval granted for vehicles produced in small series

pursuant Article 23 of the Directive, Section 3 shall be replaced by the letters NKS in block capitals.

3. On the vehicle’s statutory plate(s) only, Section 5 shall be omitted.

4. Layouts of the type-approved numbers

Example of the third system approval (with as yet no extension) issued by France

(a)

to Directive 71/320/EEC: e2*71/320*2002/2078*00003*00;

(b)

to Dirtective 2005/55/EC: e2*2005/2055*51 D*00003*00 - in the case of a

directive or regulation with different technical prescriptions (see section 3)

4.2. Example of the second extension to the fourth vehicle type-approval issued by the United

Kingdom: e11*2007/2046*0004*02

4.3. Example of a whole vehicle type-approval granted to a vehicle produced in small series issued

by Luxembourg, pursuant to Article 22 of the Directive: e13*KS07/46*0001*00

4.4. Example of a national type-approval granted to a vehicle produced in small series issued by the

Netherlands, pursuant to Article 23 of the Directive: e4*NKS*0001*00

4.5. Example of the type-approval number to be stamped on the vehicle’s statutory plate(s)

5. Schedule VII does not apply to UNECE Regulations listed in Schedule IV. Type-approvals granted

in accordance with UNECE Regulations shall continue to use the appropriate numbering provided for in the

(1)

Components and separate technical units shall be marked in accordance with the provisions of the relevant

VER|JONI ELETTRONIKA

Appendix

EC component and separate technical unit type-approval mark

1. The EC component and separate technical unit type-approval mark shall consist of

1.1. A rectangle surrounding the lower-case letter ‘e’ followed by the distinguishing letter(s) or

number of the Member State which has granted the EC component or separate technical unit type-

approval

For Germany

For Romania

For France

For Poland

For Italy

For Portugal

For the Netherlands

For Greece

For Sweden

For Ireland

For Belgium

For Slovenia

For Hungary

For Slovakia

For the Czech Republic

For Estonia

For Spain

For Latvia

For the United Kingdom

For Bulgaria

For Austria

For Lithuania

For Luxembourg

For Cyprus

For Finland

For Malta

For Denmark

1.2. In the vicinity of the rectangle the ‘base approval number’ contained in Section 4 of the type-

approval number preceded by the two figures indicating the sequence number assigned to the latest major

technical amendment to the relevant separate directive or regulation.

1.3. An additional symbol or symbols located above the rectangle, enabling certain characteristics to be

identified. This further information is specified in the relevant separate directives or regulations.

2. The component or separate technical unit type-approval mark is affixed to the separate

technical unit or component in such a way as to be indelible and clearly legible.

3. An example of a component or separate technical unit type-approval mark is contained in the

Addendum.

VER|JONI ELETTRONIKA

Addendum to Appendix 1

Example of a component or separate technical unit type-approval mark

Legend: the above component type-approval was issued by Belgium under number 0004.01 is a

sequential number denoting the level of technical requirements to which this component fulfils. The sequential

number is attributed in accordance with the relevant separate directive or regulation.

NB: The additional symbols are not shown on this example. ".

VER|JONI ELETTRONIKA

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 6 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

SUSPENSION

Drawing of the suspension arrangements: ............................................................................

Type and design of the suspension of each axle or group of axles or wheel: ..................

Level adjustment: yes/no/optional ( 1 )

A brief description of the electrical/electronic components (if any): ...............................

Air-suspension for driving axle(s): yes/no ( 1 )

Suspension of driving axle(s) equivalent to air-suspension: yes/no ( 1 )

Frequency and damping of the oscillation of the sprung mass: .....................................

Air-suspension for non-driving axle(s): yes/no ( 1 )

Suspension of non-driving axle(s) equivalent to air-suspension: yes/no ( 1 )

Frequency and damping of the oscillation of the sprung mass: ......................................

Characteristics of the springing parts of the suspension (design,

characteristics of the materials and dimensions)

Stabilisers: yes/no/optional ( 1 )

Shock absorbers: yes/no/optional ( 1 )

VER|JONI ELETTRONIKA

Tyres and wheels

Tyre/wheel combination(s)

(a) for tyres indicate size designation, load-capacity index, speed category symbol, rolling

resistance in accordance with ISO 28580 (where applicable) ( r );

(b) for wheels indicate rim size(s) and off-set(s)

Axles

Axle 1: .............................................................................................................................................

Axle 2: .............................................................................................................................................

etc.

Spare wheel, if any: ........................................................................................................................

Upper and lower limits of rolling radii

Axle 1: .............................................................................................................................................

Axle 2: .............................................................................................................................................

Axle 3: .............................................................................................................................................

Axle 4: .............................................................................................................................................

etc.

Tyre pressure(s) as recommended by the vehicle manufacturer: ....................... kPa

Chain/tyre/wheel combination on the front and/or rear axle that is suitable for the

type of vehicle, as recommended by the manufacturer: .......................................

Brief description of temporary use spare unit (if any): .....................................................

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Schedule Vi — EC Type-Approval of Motor Vehicles and their Trailers Open official source

" SCHEDULE IX

[Regulations 3, 18(5) and (6)]

EC CERTIFICATE OF CONFORMITY

0. OBJECTIVES

The certificate of conformity is a statement delivered by the vehicle manufacturer to

the buyer in order to assure him that the vehicle he has acquired complies with the legislation in

force in the European Union at the time it was produced.

The certificate of conformity also serves the purpose to enable the competent

authorities of the Member States to register vehicles without having to require the applicant to

supply additional technical documentation.

For these purposes, the certificate of conformity has to include

(a)

the Vehicle Identification Number;

(b)

the exact technical characteristics of the vehicle (i.e. it is not permitted to

mention any range of value in the various entries).

1. GENERAL DESCRIPTION

1.1.

The certificate of conformity shall consist of two parts.

(a)

SIDE 1, which consists of a statement of compliance by the manufacturer. The

same template is common to all vehicle categories.

(b)

SIDE 2, which is a technical description of the main characteristics of the

vehicle. The template of side 2 is adapted to each specific vehicle category.

1.2. The certificate of conformity shall be established in a maximum format A4 (210 × 297

mm) or a folder of maximum format A4.

1.3. Without prejudice to the provisions in Section O(b), the values and units indicated in

the second part shall be those given in the type-approval documentation of the relevant regulatory

acts. In case of conformity of production checks the values shall be verified according to the

methods laid down in the relevant regulatory acts. The tolerances allowed in those regulatory acts

shall be taken into account.

2. SPECIAL PROVISIONS

2.1. Model A of the certificate of conformity (complete vehicle) shall cover vehicles which

can be used on the road without requiring any further stage for their approval.

2.2. Model B of the certificate of conformity (completed vehicles) shall cover vehicles

which have undergone a further stage for their approval.

This is the normal result of the multi-stage approval process (e.g. a bus built by a

second stage manufacturer on a chassis built by a vehicle manufacturer).

The additional features added during the multi-stage process shall be described briefly.

VER|JONI ELETTRONIKA

2.3. Model C of the certificate of conformity (incomplete vehicles) shall cover vehicles

which need a further stage for their approval (e.g. truck chassis).

Except for tractors for semi-trailers, certificates of conformity covering chassis-cab

vehicles belonging to category N shall be of Model C.

PART I

COMPLETE AND COMPLETED VEHICLES

MODEL A1 - SIDE 1

COMPLETE VEHICLES

EC CERTIFICATE OF CONFORMITY

Side 1

The undersigned: [.............................................. (Full name and position)] hereby certifies that the vehicle

Make (Trade name of manufacturer): ...........................................................................................

Type

variant ( a ): ............................................................................................................................................................

version ( a ): ....................................................................................................................

0.2.1. Commercial name: .......................................................................................................

Vehicle category: ..........................................................................................................

Name and address of the manufacture: ............................................................................................

Location and method of attachment of the statutory plates: ..........................................

Name and address of the manufacturer’s representative (if any): ..................................

0.10. Vehicle classification number: .............................................................................................................

conforms in all respects to the type described in approval (............... type-approval number including extension

number) issued on ( ..................................... date of issue) and

can be permanently registered in Member States having right/left ( b ) hand traffic and using metric/imperial ( c )

units for the speedometer ( d ).

(Place) (Date): .......................................................

(Signature) .........................................................

VER|JONI ELETTRONIKA

MODEL A2 - SIDE 1

COMPLETE VEHICLES TYPE-APPROVED IN SMALL SERIES

[Year] [Sequential number]

EC CERTIFICATE OF CONFORMITY

Side 1

The undersigned [...................................... (Full name and position)] hereby certifies that the vehicle

Make (Trade name of manufacturer): ...........................................................................................

Type

Variant ( a ): ......................................................................................................................................

Version ( a ): .....................................................................................................................................

0.2.1. Commercial name: .........................................................................................................................

Vehicle category: ............................................................................................................................

Name and address of manufacturer: ..............................................................................................

Location and method of attachment of the statutory plates: .........................................................

Location of the vehicle identification number: .............................................................................

Name and address of the manufacturer’s representative (if any): ................................................

0.10. Vehicle identification number: ......................................................................................................

conforms in all respects to the type described in approval (............... type-approval number including extension

number) issued on ( ............................................... date of issue) and

can be permanently registered in Member States having right/left ( b ) hand traffic and using metric/imperial ( c )

units for the speedometer ( d ).

(Place) (Date): ............................................

(Signature): ...........................................................

VER|JONI ELETTRONIKA

MODEL B - SIDE 1

COMPLETED VEHICLES

EC CERTIFICATE OF CONFORMITY

Side 1

The undersigned [......................................... (Full name and position)] hereby certifies that the vehicle

Make (Trade name of the manufacturer): .........................................................................................

Type

Variant ( a ): ..........................................................................................................................................

Version ( a ): .........................................................................................................................................

0.2.1. Commercial name: .............................................................................................................................

Vehicle category: ...............................................................................................................................

Name and address of the manufacturer: ...........................................................................................

Location and method of attachment of the statutory plates: ............................................................

Location of the vehicle identification number: ................................................................................

Name and address of the manufacturer’s representative (if any): ..................................................

0.10. Vehicle identification number: ..........................................................................................................

has been completed and altered ( 1 ) as follows

(a)

............................................................................................................ and

(b)

conforms in all respects to the type described in approval (.............. type-approval

number including extension number) issued on ( ............................................... date of issue) and

can be permanently registered in Member States having right/left ( b ) hand traffic and

(c)

using metric/imperial ( c ) units for the speedometer ( d ).

(Place) (Date): .........................................................

(Signature): ...........................................................

Attachments: Certificate of conformity delivered at each previous stage.

VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY M 1

(complete and completed vehicles)

Side 2

General construction characteristics

Number of axles: ................................ and wheels: ......................................

3. Powered axles (number, position, interconnection): ..........................................................................

Main dimensions

Wheelbase ( e ): ............................................ mm

4. Axle(s) track: 1-2 ..................... mm 2-3 ...................... mm 3-4 ........................ mm

5. Length: .................................... mm

6. Width: .................................... mm

7. Height: .................................... mm

Masses

Mass of the vehicle in running order: ................................... kg ( f )

13.

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ......................... kg

16.2. Technically permissible mass on each axle: 1. ............. kg 2. ............... kg 3. ................. kg etc.

16.4. Technically permissible maximum mass of the combination: .......................... kg

18. Technically permissible maximum towable mass in case of

18.1. Drawbar trailer ......................... kg

18.3. Centre-axle trailer: .................... kg

18.4. Unbraked trailer: ....................... kg

19. Technically permissible maximum static vertical mass at the coupling point: ................... kg

Power plant

20. Manufacturer of the engine: ..................................................................................................................

21. Engine code as marked on the engine: .............................................................................................

22. Working principle: ................................................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

VER|JONI ELETTRONIKA

24. Number and arrangement of cylinders: ............................................................................................

Engine capacity: .............................. cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power ( g ): .................... kW at ............... min -1 or maximum continuous

27. rated power (electric motor) ....................... kW ( 1 )

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

30. Axle(s) track: 1. ......................... mm 2. ......................... mm 3. ......................... mm

Tyre/wheel combination ( h ): .........................................................................................

35. Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36. Bodywork

Code for bodywork ( i ): .................................................................................................

38. Colour of vehicle ( j ): .....................................................................................................

40.

41. Number and configuration of doors: .............................................................................

Number of seating positions (including the driver) ( k ): .................................................

42.

42.1. Seat(s) designated for use only when the vehicle is stationary: .....................................

42.3. Number of wheelchair user accessible position: ...........................................................

Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: ............................ min -1

Drive-by: ............................ dB(A)

Exhaust emission level ( l ): Euro ............................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1.1.

CO: ......... HC: .......... NOx : .......... HC + NOx : .......... Particulates: ..........

Smoke opacity (ELR): ............................ (m -1 )

VER|JONI ELETTRONIKA

test procedure: Type I (Euro 5 or 6 ( 1 ))

CO: .......... THC: .......... NMHC: .......... NO x : .......... THC + NO x : ..........

Particulates (mass): .......... Particles (number): ........

2. test procedure: ETC (if applicable)

CO: ....... NO x: ........ NMHC: ........ THC: ....... CH 4 : ........ Particulates: .........

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

CO 2 emissions/fuel consumption/electric energy consumption ( m )

49.

1. all power train except pure electric vehicles

CO 2 emissions

Fuel consumption

Urban conditions

.............. g/km

............ l/100 km

............ l/100 km / m 3 /100 km ( 1 )

Extra-urban conditions

.............. g/km

............ l/100 km / m 3 /100 km ( 1 )

Combined

.............. g/km

............ l/100 km / m 3 /100 km ( 1 )

Weighted, combined

.............. g/km

2. pure electric vehicles and OVC hybrid electric vehicles

Electric energy consumption (weighted, combined ( 1 )) ....................... Wh/km

Electric range ............................ km

Miscellaneous

51. For special purpose vehicles: designation in accordance with Annex II Section 5: ......

Remarks ( n ): .................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY M 2

(complete and completed vehicles)

Side 2

General construction characteristics

1. Number of axles: ................................................ and wheels: ......................................

Number and position of axles with twin wheels: ...........................................................

2. Steered axles (number, position): ..................................................................................

3. Powered axles (number, position, interconnection): .....................................................

Main dimensions

Wheelbase ( e ): ......................................... mm

4. Axle spacing: 1-2: ................ mm 2-3: ..................... mm 3-4: ................... mm

5. Length: ............................ mm

6. Width: ............................ mm

7. Height: ............................ mm

9. Distance between the front end of the vehicle and the centre of the coupling device

............................... mm

12. Rear overhang: ........................... mm

Masses

Mass of the vehicle in running order: ............................ kg ( f )

13.

13.1. Distribution of this mass amongst the axles: 1. .......... kg 2. .......... kg 3. ........... kg etc.

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. .......... kg 2. ........... kg 3. .......... kg etc.

16.3. Technically permissible mass on each axle group: 1. ...... kg 2. ........ kg 3. ....... kg etc.

16.4. Technically permissible maximum mass of the combination: ............................ kg

17. Intended registration/in service maximum permissible masses in national/international

traffic ( 1 )( o )

17.1. Intended registration/in service maximum permissible laden mass: ........................ kg

17.2. Intended registration/in service maximum permissible laden mass on each axle

1. ............... kg 2. ............... kg 3. ................ kg

VER|JONI ELETTRONIKA

17.3. Intended registration/in service maximum permissible laden mass on each axle group

1. ............... kg 2. ............... kg 3. ................ kg

17.4. Intended registration/in service maximum permissible mass of the combination

....................... kg

18. Technically permissible maximum towable mass in case of

18.1. Drawbar trailer: ............................ kg

18.3. Centre-axle trailer: ........................... kg

18.4. Unbraked trailer: ............................ kg

19. Technically permissible maximum static mass at the coupling point: ...................... kg

Power plant

20. Manufacturer of the engine: ..........................................................................................

21. Engine code as marked on the engine: ..........................................................................

22. Working principle: ........................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

24. Number and arrangement of cylinders: .........................................................................

Engine capacity: ........................... cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power ( g ): .......................... kW at ............................ min -1 or maximum

27. continuous rated power (electric motor) ............................ kW ( 1 )

28. Gearbox (type): ............................

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

30. Axle(s) track: 1. ....................... mm 2. ........................ mm 3. ......................... mm

Drive axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

33. Tyre/wheel combination ( h ): ............................

35. Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36.

37. Pressure in feed line for trailer braking system: ................................... bar

VER|JONI ELETTRONIKA

Bodywork

Code for bodywork ( i ): .................................................................................................

38. Class of vehicle: class I/Class II/Class III/Class A/Class B ( 1 )

39.

41. Number and configuration of doors: .............................................................................

Number of seating positions (including the driver) ( k ): .................................................

42.

42.1. Seat(s) designated for use only when the vehicle is stationary: .....................................

42.3. Number of wheelchair user accessible position: ...........................................................

43. Number of standing places: ..........................................................................................

Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45.1. Characteristics values ( 1 ): D: ....../ V: ....../ S: ....../ U: ......

Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: ............................ min -1

Drive-by: ............................ dB(A)

Exhaust emission level ( l ): Euro ...........................................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1.1.

CO: .......... HC: .......... NO x : .......... HC + NO x : .......... Particulates: .....................

Smoke opacity (ELR): ............................ (m -1 )

test procedure: Type I (Euro 5 or 6 ( 1 ))

1.2.

CO: ................ THC: .............. NMHC: ............. NOx: ............. THC + NOx: ..........

Particulates (mass): ...................... Particles (number): ....................

2. test procedure: ETC (if applicable)

CO: ......... NOx : ......... NMHC: ......... THC: ......... CH 4 : .......... Particulates: .............

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

Miscellaneous

51. For special purpose vehicles: designation in accordance with Schedule II Section 5: ...

Remarks ( n ): .................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY M 3

(complete and completed vehicles)

Side 2

General construction characteristics

1. Number of axles: ....................................... and wheels: ...............................................

Number and position of axles with twin wheels: ...........................................................

2. Steered axles (number, position): ..................................................................................

3. Powered axles (number, position, interconnection): .....................................................

Main dimensions

Wheelbase ( e ): ............................ mm

4. Axle spacing: 1-2: ................ mm 2-3: ................... mm 3-4: .................... mm

5. Length: ............................ mm

6. Width: ............................ mm

7. Height: ............................ mm

9. Distance between the front end of the vehicle and the centre of the coupling device

............................ mm

12. Rear overhang: ........................... mm

Masses

Mass of the vehicle in running order: ............................ kg ( f )

13.

13.1. Distribution of this mass amongst the axles: 1. .......... kg 2. .......... kg 3. ........... kg etc.

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. .......... kg 2. .......... kg 3. ........... kg etc.

16.3. Technically permissible mass on each axle group: 1. ....... kg 2. ........ kg 3. ...... kg etc.

16.4. Technically permissible maximum mass of the combination: ............................ kg

17. Intended registration/in service maximum permissible masses in national/international

traffic ( 1 )( o ) ...................................................................................................................

17.1. Intended registration/in service maximum permissible laden mass: ........................ kg

17.2. Intended registration/in service maximum permissible laden mass on each axle

1. ............... kg 2. ............... kg 3. ................ kg

VER|JONI ELETTRONIKA

17.3. Intended registration/in service maximum permissible laden mass on each axle group

1. ............... kg 2. ............... kg 3. ................ kg

17.4. Intended registration/in service maximum permissible mass of the combination: .... kg

18. Technically permissible maximum towable mass in case of

18.1. Drawbar trailer: ............................ kg

18.3. Centre-axle trailer: ........................... kg

18.4. Unbraked trailer: ............................ kg

19. Technically permissible maximum static mass at the coupling point: ...................... kg

Power plant

20. Manufacturer of the engine: .........................................................................................

21. Engine code as marked on the engine: ..........................................................................

22. Working principle: .......................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

24. Number and arrangement of cylinders: .........................................................................

Engine capacity: ........................... cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power ( g ): ................. kW at ................... min -1 or maximum continuous

27. rated power (electric motor) ............................ kW ( 1 )

28. Gearbox (type): ............................

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

30.1. Track of each steered axle: ............................ mm

30.2. Track of all other axles: ............................ mm

32. Position of loadable axle(s): ...........................

Drive axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

33. Tyre/wheel combination ( h ): ............................

35. Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36. VER|JONI ELETTRONIKA

37. Pressure in feed line for trailer braking system: ........................... bar

Bodywork

Code for bodywork ( i ): .................................................................................................

38. Class of vehicle: class I/Class II/Class III/Class A/Class B ( 1 )

39.

41. Number and configuration of doors: .............................................................................

Number of seating positions (including the driver) ( k ): .................................................

42.

42.1. Seat(s) designated for use only when the vehicle is stationary: .....................................

42.2. Number of passenger seating positions: ....................... (lower deck) ...........................

(upper deck) (including the driver)

42.3. Number of wheelchair user accessible position: ...........................................................

43. Number of standing places: ..........................................................................................

Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45.1. Characteristics values ( 1 ): D: ...../ V: ...../ S: ...../ U: .....

Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: ............................ min -1

Drive-by: ............................ dB(A)

Exhaust emission level ( l ): Euro ............................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1. CO: .......... HC: .......... NOx : ......... HC + NOx : .......... Particulates: ..........

Smoke opacity (ELR): ............................ (m -1 )

2. test procedure: ETC (if applicable)

CO: .......... NOx: ......... NMHC: ......... THC: .......... CH 4 : .......... Particulates: ...........

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

Miscellaneous

51. For special purpose vehicles: designation in accordance with Schedule II Section 5: ...

Remarks ( n ): .................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY N 1

(complete and completed vehicles)

Side 2

General construction characteristics

1. Number of axles: ....................................... and wheels: ...............................................

Number and position of axles with twin wheels: ...........................................................

3. Powered axles (number, position, interconnection): .....................................................

Main dimensions

Wheelbase ( e ): ............................ mm

4. Axle spacing: 1-2: ................. mm 2-3: .................. mm 3-4: ................ mm

5. Length: ............................ mm

6. Width: ............................ mm

7. Height: ............................ mm

8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): ......... mm

9. Distance between the front end of the vehicle and the centre of the coupling device

........................................... mm

11. Length of the loading area: .................................................................................... mm

Masses

Mass of the vehicle in running order: .................................................................. kg ( f )

13.

13.1. Distribution of this mass amongst the axles: 1. ............. kg 2. ........... kg 3. ............. kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ....................................................... kg

16.2. Technically permissible mass on each axle: 1. .......... kg 2. ........... kg 3. ........... kg etc.

16.4. Technically permissible maximum mass of the combination: ............................ kg

18. Technically permissible maximum towable mass in case of

18.1. Drawbar trailer: ............................ kg

18.2. Semi-trailer: ............................ kg

18.3. Centre-axle trailer: ........................... kg

18.4. Unbraked trailer: ............................ kg

VER|JONI ELETTRONIKA

19. Technically permissible maximum static mass at the coupling point: ...................... kg

Power plant

20. Manufacturer of the engine: ..........................................................................................

21. Engine code as marked on the engine: ..........................................................................

22. Working principle: ........................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

24. Number and arrangement of cylinders: .........................................................................

Engine capacity: ....................................... cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power ( g ): .......................... kW at ............................ min -1 or maximum

27. continuous rated power (electric motor) ............................ kW ( 1 )

28. Gearbox (type): .............................................................................................................

Maximum speed

29. Maximum speed: ....................................................... km/h

Axles and suspension

30. Axle(s) track: 1. .......................... mm 2. .......................... mm 3. ......................... mm

Tyre/wheel combination ( h ): .........................................................................................

35. Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36.

37. Pressure in feed line for trailer braking system: .......................................... bar

Bodywork

Code for bodywork ( i ): .................................................................................................

38. Colour of vehicle ( j ): .....................................................................................................

40.

41. Number and configuration of doors: .............................................................................

Number of seating positions (including the driver) ( k ): .................................................

42. Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45.1. Characteristics values ( 1 ): D: ........../ V: ........../ S: ........../ U: ..........

VER|JONI ELETTRONIKA

Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: ............................ min -1

Drive-by: ............................ dB(A)

Exhaust emission level ( 1 ): Euro ............................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1.1.

CO: .......... HC: .......... NOx: .......... HC + NOx: .......... Particulates: ..........

Smoke opacity (ELR): .......................... (m -1 )

test procedure: Type I (Euro 5 or 6 ( 1 ))

1.2.

CO: ............ THC: ............. NMHC: ............. NOx: ............. THC + NOx: ...............

Particulates (mass): ................ Particles (number): ...................

2. test procedure: ETC (if applicable)

CO: .......... NOx: .......... NMHC: ......... THC: .......... CH 4 : .......... Particulates: ..........

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

CO 2 emissions/fuel consumption/electric energy consumption ( m )

49.

1. all power train except pure electric vehicles

CO 2 emissions

Fuel consumption

Urban conditions

.............. g/km

............ l/100 km

............ l/100 km / m 3 /100 km ( 1 )

Extra-urban conditions

.............. g/km

............ l/100 km / m 3 /100 km ( 1 )

Combined

.............. g/km

............ l/100 km / m 3 /100 km ( 1 )

Weighted, combined

.............. g/km

2. pure electric vehicles and OVC hybrid electric vehicles

Electric energy consumption (weighted, combined ( 1 )) ....................... Wh/km

Electric range ............................ km

Miscellaneous

50. Type-approved class(es) according to the design requirements for transporting

dangerous goods: yes/no ( l )

51. For special purpose vehicles: designation in accordance with Schedule II Section 5: ...

Remarks ( n ): .................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY N 2

(complete and completed vehicles)

Side 2

General construction characteristics

1. Number of axles: ......................................... and wheels: .............................................

Number and position of axles with twin wheels: ...........................................................

2. Steered axles (number, position): ..................................................................................

3. Powered axles (number, position, interconnection): .....................................................

Main dimensions

Wheelbase ( e ): ............................ mm

4. Axle spacing: 1-2: .......... mm 2-3: .......... mm 3-4: .......... mm

5. Length: ............................ mm

6. Width: ............................ mm

8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): ......... mm

9. Distance between the front end of the vehicle and the centre of the coupling device

.......................................... mm

11. Length of the loading area: .................................................................................... mm

12. Rear overhang: ....................................................................................................... mm

Masses

Mass of the vehicle in running order: ....................................................... kg ( f )

13.

13.1. Distribution of this mass amongst the axles: 1. ........... kg 2. ............ kg 3. ............. kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ...................................... kg

16.2. Technically permissible mass on each axle: 1. .......... kg 2. ........... kg 3. .......... kg etc.

16.3. Technically permissible mass on each axle group: 1. ....... kg 2. ........ kg 3. ....... kg etc.

16.4. Technically permissible maximum mass of the combination: ............................ kg

17. Intended registration/in service maximum permissible masses in national/international

traffic ( 1 )( o )

17.1. Intended registration/in service maximum permissible laden mass: ......................... kg

17.2. Intended registration/in service maximum permissible laden mass on each axle

VER|JONI ELETTRONIKA

1. ............... kg 2. ............... kg 3. ................ kg

17.3. Intended registration/in service maximum permissible laden mass on each axle group

1. ............... kg 2. ............... kg 3. ................ kg

17.4. Intended registration/in service maximum permissible mass of the combination: .... kg

18. Technically permissible maximum towable mass in case of

18.1. Drawbar trailer: ............................ kg

18.2. Semi-trailer: .................................. kg

18.3. Centre-axle trailer: ........................... kg

18.4. Unbraked trailer: ............................ kg

19. Technically permissible maximum static mass at the coupling point: ...................... kg

Power plant

20. Manufacturer of the engine: ..........................................................................................

21. Engine code as marked on the engine: ..........................................................................

22. Working principle: ........................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

24. Number and arrangement of cylinders: .........................................................................

Engine capacity: ........................... cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power ( g ): ......................... kW at ........................... min -1 or maximum

27. continuous rated power (electric motor) ............................ kW ( 1 )

28. Gearbox (type): .............................................................................................................

Maximum speed

29. Maximum speed: ........................................... km/h

Axles and suspension

31. Position of retractable axle(s): ......................................................................................

32. Position of loadable axle(s): .........................................................................................

Drive axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

33. Tyre/wheel combination ( h ): .........................................................................................

35. VER|JONI ELETTRONIKA

Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36.

37. Pressure in feed line for trailer braking system: .................................... bar

Bodywork

Code for bodywork ( i ): .................................................................................................

38.

41. Number and configuration of doors: .............................................................................

Number of seating positions (including the driver) ( k ): .................................................

42. Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45.1. Characteristics values ( 1 ): D: ........../ V: ........../ S: ........../ U: ..........

Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: ............................ min -1

Drive-by: ............................ dB(A)

Exhaust emission level ( l ): Euro ..................................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1.1.

CO: .......... HC: .......... NOx: .......... HC + NOx: .......... Particulates: ..........

Smoke opacity (ELR): ............................ (m -1 )

test procedure: Type I (Euro 5 or 6 ( 1 ))

1.2.

CO: .......... THC: .......... NMHC: .......... NOx: .......... THC + NOx: ..........

Particulates (mass): .......... Particles (number): ................

2. test procedure: ETC (if applicable)

CO: ........ NOx: ........ NMHC: ........ THC:........ CH 4 : ........ Particulates: .........

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

Miscellaneous

50. Type-approved class(es) according to the design requirements for transporting

dangerous goods: yes/no ( l )

51. For special purpose vehicles: designation in accordance with Annex II Section 5: .......

52. Remarks ( n ): ............................

VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY N 3

(complete and completed vehicles)

Side 2

General construction characteristics

1. Number of axles: ........................................ and wheels: ..............................................

Number and position of axles with twin wheels: ...........................................................

2. Steered axles (number, position): ..................................................................................

3. Powered axles (number, position, interconnection): .....................................................

Main dimensions

Wheelbase ( e ): ................................ mm

4. Axle spacing: 1-2: ................mm 2-3: ................. mm 3-4: ................... mm

5. Length: ...................................... mm

6. Width: ....................................... mm

8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): ......... mm

9. Distance between the front end of the vehicle and the centre of the coupling device

............................... mm

11. Length of the loading area: ............................ mm

12. Rear overhang: ............................................. mm

Masses

Mass of the vehicle in running order: ............................ kg ( f )

13.

13.1. Distribution of this mass amongst the axles: 1. ............. kg 2. ............ kg 3. ............ kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. .......... kg 2. ........... kg 3. .......... kg etc.

16.3. Technically permissible mass on each axle group: 1. ........ kg 2. ....... kg 3. ...... kg etc.

16.4. Technically permissible maximum mass of the combination: ............................ kg

17. Intended registration/in service maximum permissible masses in national/international

traffic ( 1 )( o )

17.1. Intended registration/in service maximum permissible laden mass: ......................... kg

17.2. Intended registration/in service maximum permissible laden mass on each axle

VER|JONI ELETTRONIKA

1. ............... kg 2. ............... kg 3. ................ kg

17.3. Intended registration/in service maximum permissible laden mass on each axle group

1. ............... kg 2. ............... kg 3. ................ kg

17.4. Intended registration/in service maximum permissible mass of the combination: .... kg

18. Technically permissible maximum towable mass in case of

18.1. Drawbar trailer: .......................................... kg

18.2. Semi-trailer: ............................................... kg

18.3. Centre-axle trailer: ..................................... kg

18.4. Unbraked trailer: ......................................... kg

19. Technically permissible maximum static mass at the coupling point: ...................... kg

Power plant

20. Manufacturer of the engine: ..........................................................................................

21. Engine code as marked on the engine: ..........................................................................

22. Working principle: ........................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

24. Number and arrangement of cylinders: .........................................................................

Engine capacity: ..................................... cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power ( g ): ......................... kW at ........................... min -1 or maximum

27. continuous rated power (electric motor) ............................ kW ( 1 )

28. Gearbox (type): .......................................

Maximum speed

29. Maximum speed: ........................................ km/h

Axles and suspension

31. Position of retractable axle(s): ........................................

32. Position of loadable axle(s): ............................................

Drive axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

33. Tyre/wheel combination ( h ): .........................................

35. VER|JONI ELETTRONIKA

Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36.

37. Pressure in feed line for trailer braking system: ........................... bar

Bodywork

Code for bodywork ( i ): .................................................................................................

38.

41. Number and configuration of doors: .............................................................................

Number of seating positions (including the driver) ( k ): .................................................

42. Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45.1. Characteristics values ( 1 ): D: ........../ V: ............../ S: ............../ U: ....................

Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: ............................ min -1

Drive-by: ............................ dB(A)

Exhaust emission level ( l ): Euro ............................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1. CO: .......... HC: .......... NOx: ......... HC + NOx: .......... Particulates: .............

Smoke opacity (ELR): ............................ (m -1 )

2. test procedure: ETC (if applicable)

CO: ........ NOx: ....... NMHC: ....... THC: ....... CH 4 : ....... Particulates: ..........

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

Miscellaneous

50. Type-approved class(es) according to the design requirements for transporting

dangerous goods: yes/no ( l ): .........................................................................................

51. For special purpose vehicles: designation in accordance with Schedule II Section 5: ...

Remarks ( n ): .................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORIES O 1 AND O 2

(complete and completed vehicles)

Side 2

General construction characteristics

1. Number of axles: ............................................ and wheels: ..........................................

Number and position of axles with twin wheels: ...........................................................

Main dimensions

Wheelbase ( e ): ............................................... mm

4. Axle spacing: 1-2: ................. mm 2-3: ..................... mm 3-4: ................... mm

5. Length: ................................... mm

6. Width: ..................................... mm

7. Height: ...................................... mm

10. Distance between the centre of the coupling device and the rear end of the vehicle

.............................. mm

11. Length of the loading area: ............................ mm

12. Rear overhang: ........................... mm

Masses

Mass of the vehicle in running order: ............................ kg ( f )

13.

13.1. Distribution of this mass amongst the axles: 1. ............ kg 2. ............ kg 3. ............. kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. ........... kg 2. ........... kg 3. ......... kg etc.

16.3. Technically permissible mass on each axle group: 1. ....... kg 2. ........ kg 3. ...... kg etc.

19. Technically permissible maximum static mass on the coupling point of a semi-trailer

or centre-axle trailer: ........................... kg

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

30.1. Track of each steered axle: ............................ mm

30.2. Track of all other axles: ............................ mm

VER|JONI ELETTRONIKA

31. Position of retractable axle(s): ......................................................................................

32. Position of loadable axle(s): ........................................................................................

Axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

34. Tyre/wheel combination ( h ): .........................................................................................

35. Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36. Bodywork

Code for bodywork ( i ): .................................................................................................

38. Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45.1. Characteristics values ( 1 ): D: ................/ V: ................/ S: ..................../ U: ................

Miscellaneous

50. Type-approved class(es) according to the design requirements for transporting

dangerous goods: yes/no ( l )

51. For special purpose vehicles: designation in accordance with Schedule II Section 5

Remarks ( n ): .................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORIES O 3 AND O 4

(complete and completed vehicles)

Side 2

General construction characteristics

1. Number of axles: ........................................... and wheels: ...........................................

Number and position of axles with twin wheels: ...........................................................

2. Steered axles (number, position): ..................................................................................

Main dimensions

Wheelbase ( e ): ............................ mm

4. Axle spacing: 1-2: ................. mm 2-3: .................... mm 3-4: ................. mm

5. Length: ............................ mm

6. Width: ............................ mm

7. Height: ............................ mm

10. Distance between the centre of the coupling device and the rear end of the vehicle

........................... mm

11. Length of the loading area: ............................ mm

12. Rear overhang: ........................... mm

Masses

Mass of the vehicle in running order: ............................ kg ( f )

13.

13.1. Distribution of this mass amongst the axles: 1. ............ kg 2. ............ kg 3. ............ kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. ........... kg 2. ........... kg 3. ......... kg etc.

16.3. Technically permissible mass on each axle group: 1. ....... kg 2. ....... kg 3. ....... kg etc.

17. Intended registration/in service maximum permissible masses in national/international

traffic ( 1 )( o )

17.1. Intended registration/in service maximum permissible laden mass: ......................... kg

17.2. Intended registration/in service maximum permissible laden mass on each axle

1. ............... kg 2. ............... kg 3. ................ kg

17.3. Intended registration/in service maximum permissible laden mass on each axle group

VER|JONI ELETTRONIKA

1. ............... kg 2. ............... kg 3. ................ kg

19. Technically permissible maximum static mass on the coupling point of a semi-trailer

or centre-axle trailer: ........................... kg

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

31. Position of retractable axle(s): ......................................................................................

32. Position of loadable axle(s): .........................................................................................

Axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

34. Tyre/wheel combination ( h ): .........................................................................................

35. Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36. Bodywork

Code for bodywork ( i ): .................................................................................................

38. Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45.1. Characteristics values ( 1 ): D: ................../ V: ................/ S: .............../ U: ................

Miscellaneous

50. Type-approved class(es) according to the design requirements for transporting

dangerous goods: yes/no ( l )

51. For special purpose vehicles: designation in accordance with Schedule II Section 5

Remarks ( n ): .................................................................................................................

52. VER|JONI ELETTRONIKA

MODEL C1 - SIDE 1

PART II

INCOMPLETE VEHICLES

EC CERTIFICATE OF CONFORMITY

Side 1

The undersigned [......................... (Full name and position)] hereby certifies that the vehicle

0.1.

Make (Trade name of manufacturer): ...........................................................................

0.2.

Type: ............................................................................................................................

Variant ( a ): .............................................................................................................................

Version ( a ): .............................................................................................................................

0.2.1. Commercial name: ........................................................................................................

0.4.

Vehicle category: .........................................................................................................

0.5.

Name and address of manufacturer: .............................................................................

0.6.

Location and method of attachment of the statutory plates: ..........................................

Location of the vehicle identification number: .............................................................

0.9.

Name and address of the manufacturer’s representative (if any): ..................................

0.10. Vehicle identification number: .....................................................................................

conforms in all respects to the type described in approval (............... type-approval number

including extension number) issued

on ( ............................................... date of issue) and cannot be permanently registered

without further approvals.

(Place) (Date): ..........................................

(Signature): ...........................................................

VER|JONI ELETTRONIKA

MODEL C2 - SIDE 1

INCOMPLETE VEHICLES TYPE-APPROVED IN SMALL SERIES

[Year]

[Sequential number]

EC CERTIFICATE OF CONFORMITY

Side 1

The undersigned [....................... (Full name and position)] hereby certifies that the vehicle

Make (Trade name of manufacturer): ...........................................................................

Type: ............................................................................................................................

Variant ( a ): ....................................................................................................................

Version ( a ): ...................................................................................................................

0.2.1. Commercial name: ........................................................................................................

Vehicle category: ..........................................................................................................

Name and address of manufacturer: ..............................................................................

Location and method of attachment of the statutory plates: ..........................................

Location of the vehicle identification number: .............................................................

Name and address of the manufacturer’s representative (if any): .................................

0.10. Vehicle identification number: .....................................................................................

conforms in all respects to the type described in approval (............... type-approval number

including extension number) issued on ( ............................................... date of issue) and

cannot be permanently registered without further approvals.

(Place) (Date): ................................................

(Signature): ...........................................................

VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY M 1

(incomplete vehicles)

Side 2

General construction characteristics

1. Number of axles: ........................................ and wheels: .............................................

3. Powered axles (number, position, interconnection): .....................................................

Main dimensions

Wheelbase ( e ): ............................ mm

4. Axle spacing: 1-2: ................... mm 2-3: ..................... mm 3-4: ................... mm

Maximum permissible length: ............................ mm

Maximum permissible width: ............................ mm

Maximum permissible height: ............................ mm

12.1. Maximum permissible rear overhang: ............................ mm

Masses

Mass of the incomplete vehicle in running order: ............................ kg ( f )

14.

14.1. Distribution of this mass amongst the axles: 1. ........... kg 2. ........... kg 3. ............. kg

15. Minimum mass of the vehicle when completed: ............................ kg

15.1. Distribution of this mass amongst the axles: 1. ........... kg 2. ............ kg 3. .............. kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. .......... kg 2. .......... kg 3. ........... kg etc.

16.4. Technically permissible maximum mass of the combination: ............................ kg

18. Technically permissible maximum towable mass in case of

18.1. Drawbar trailer: ............................ kg

18.3. Centre-axle trailer: ........................... kg

18.4. Unbraked trailer: ............................ kg

19. Technically permissible maximum static vertical mass at the coupling point: ......... kg

Power plant

20. Manufacturer of the engine: .........................................................................................

VER|JONI ELETTRONIKA

21. Engine code as marked on the engine: ..........................................................................

22. Working principle: ........................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

24. Number and arrangement of cylinders: .........................................................................

Engine capacity: ........................... cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power ( g ): .......................... kW at ............................ min -1 or maximum

27. continuous rated power (electric motor) ............................ kW ( 1 )

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

30. Axle(s) track: 1. ......................... mm 2. ......................... mm 3. ........................... mm

Tyre/wheel combination ( h ): .........................................................................................

35. Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36. Bodywork

41. Number and configuration of doors: .............................................................................

Number of seating positions (including the driver) ( k ): .................................................

42. Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: .......................... min -1

Drive-by: ............................ dB(A)

Exhaust emission level ( l ): Euro ............................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1.1.

CO: .......... HC: .......... NOx: .......... HC + NOx: .......... Particulates: ..........

Smoke opacity (ELR): ............................ (m -1 )

VER|JONI ELETTRONIKA

test procedure: Type I (Euro 5 or 6 ( 1 ))

CO: .......... THC: .......... NMHC: .......... NOx: .......... THC + NOx: ..........

Particulates (mass): .......... Particles (number): ...................

2. test procedure: ETC (if applicable)

CO: ........ NOx: ........ NMHC: ........ THC: ....... CH 4 : ........ Particulates: .........

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

CO 2 emissions/fuel consumption/electric energy consumption ( m )

49.

1. all power train except pure electric vehicles

CO 2 emissions

Fuel consumption

Urban conditions

.............. g/km

............ l/100 km

............ l/100 km / m 3 /100 km ( 1 )

Extra-urban conditions

.............. g/km

............ l/100 km / m 3 /100 km ( 1 )

Combined

.............. g/km

............ l/100 km / m 3 /100 km ( 1 )

Weighted, combined

.............. g/km

2. pure electric vehicles and OVC hybrid electric vehicles

Electric energy consumption (weighted, combined ( 1 )) ...................... Wh/km

Electric range ............................ km

Miscellaneous

52. Remarks ( n ): .....................................................................................................................

VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY M 2

(incomplete vehicles)

Side 2

General construction characteristics

1. Number of axles: ...................................... and wheels: ................................................

Number and position of axles with twin wheels: ...........................................................

2. Steered axles (number, position): ..................................................................................

3. Powered axles (number, position, interconnection): .....................................................

Main dimensions

Wheelbase ( e ): ............................................. mm

4. Axle spacing: 1-2: .................. mm 2-3: ........................ mm 3-4: ..................... mm

Maximum permissible length: ......................................... mm

Maximum permissible width: ........................................... mm

Maximum permissible height: ........................................... mm

12.1. Maximum permissible rear overhang: ............................... mm

Masses

Mass of the incomplete vehicle in running order: ............................ kg ( f )

14.

14.1. Distribution of this mass amongst the axles: 1. .......... kg 2. ........... kg 3. .......... kg etc.

15. Minimum mass of the vehicle when completed: ............................ kg

15.1. Distribution of this mass amongst the axles: 1. ............ kg 2. ............ kg 3. ............. kg

16. Technically permissible maximum masses

16.1 Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. ........... kg 2. .......... kg 3. .......... kg etc.

16.3. Technically permissible mass on each axle group: 1. ....... kg 2. ........ kg 3. ...... kg etc.

16.4. Technically permissible maximum mass of the combination: ............................ kg

17. Intended registration/in service maximum permissible masses in national/international

traffic ( 1 )( o )

17.1. Intended registration/in service maximum permissible laden mass: ......................... kg

17.2. Intended registration/in service maximum permissible laden mass on each axle

VER|JONI ELETTRONIKA

1. ............... kg 2. ............... kg 3. ................ kg

17.3. Intended registration/in service maximum permissible laden mass on each axle group

1. ............... kg 2. ............... kg 3. ................ kg

17.4. Intended registration/in service maximum permissible mass of the combination

............................ kg

18. Technically permissible maximum towable mass in case of

18.1. Drawbar trailer: ............................ kg

18.3. Centre-axle trailer: ........................... kg

18.4. Unbraked trailer: ............................ kg

19. Technically permissible maximum static mass at the coupling point: ...................... kg

Power plant

20. Manufacturer of the engine: ..........................................................................................

21. Engine code as marked on the engine: ..........................................................................

22. Working principle: ........................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

24. Number and arrangement of cylinders: ........................................................................

Engine capacity: ........................... cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power ( g ): ........................... kW at .......................... min -1 or maximum

27. continuous rated power (electric motor) ............................ kW ( 1 )

28. Gearbox (type): ............................

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

30. Axle(s) track: 1. .......................... mm 2. .......................... mm 3. ........................ mm

Drive axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

33. Tyre/wheel combination ( h ): .........................................................................................

35. Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36. VER|JONI ELETTRONIKA

37. Pressure in feed line for trailer braking system: ........................... bar

Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45. Type or classes of coupling devices which can be fitted: ..................................................

45.1. Characteristics values ( 1 ): D: ............./ V: ............../ S: ................./ U: ...................

Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: ............................ min -1

Drive-by: ............................ dB(A)

Exhaust emission level ( l ): Euro ............................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1.1.

CO: .......... HC: .......... NOx: .......... HC + NOx: .......... Particulates: ..........

Smoke opacity (ELR): ............................ (m -1 )

test procedure: Type I (Euro 5 or 6 ( 1 ))

1.2.

CO: .......... THC: .......... NMHC: .......... NOx: .......... THC + NOx: ..........

Particulates (mass): .......... Particles (number): ................

2. test procedure: ETC (if applicable)

CO: ....... NOx: ....... NMHC: ........ THC: ........ CH 4 : ......... Particulates: .........

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

Miscellaneous

Remarks ( n ): .................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY M 3

(incomplete vehicles)

Side 2

General construction characteristics

1. Number of axles: .......................................... and wheels: ............................................

1.1.

Number and position of axles with twin wheels: ...........................................................

2. Steered axles (number, position): ..................................................................................

3. Powered axles (number, position, interconnection): ....................................................

Main dimensions

Wheelbase ( e ): ............................ mm

4.

4.1.

Axle spacing: 1-2: ................. mm 2-3: ................... mm 3-4: .................... mm

5.1.

Maximum permissible length: ............................ mm

6.1.

Maximum permissible width: ............................ mm

7.1.

Maximum permissible height: ............................ mm

12.1. Maximum permissible rear overhang: ............................ mm

Masses

Mass of the incomplete vehicle in running order: ............................ kg ( f )

14.

14.1. Distribution of this mass amongst the axles: 1. .......... kg 2. ........... kg 3. .......... kg etc.

15. Minimum mass of the vehicle when completed: ............................ kg

15.1. Distribution of this mass amongst the axles: 1. ........... kg 2. ............. kg 3. ............. kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. ........... kg 2. .......... kg 3. .......... kg etc.

16.3. Technically permissible mass on each axle group: 1. ...... kg 2. ....... kg 3. ........ kg etc.

16.4. Technically permissible maximum mass of the combination: ............................ kg

17. Intended registration/in service maximum permissible masses in national/international

traffic ( 1 )( o )

17.1. Intended registration/in service maximum permissible laden mass: ........................ kg

17.2. Intended registration/in service maximum permissible laden mass on each axle

VER|JONI ELETTRONIKA

1. ............... kg 2. ............... kg 3. ................ kg

17.3. Intended registration/in service maximum permissible laden mass on each axle group

1. ............... kg 2. ............... kg 3. ................ kg

17.4. Intended registration/in service maximum permissible mass of the combination

............................ kg

18. Technically permissible maximum towable mass in case of

18.1

Drawbar trailer: ............................ kg

18.3. Centre-axle trailer: ........................... kg

18.4. Unbraked trailer: ............................ kg

19. Technically permissible maximum static mass at the coupling point: ..................... kg

Power plant

20. Manufacturer of the engine: ..........................................................................................

21. Engine code as marked on the engine: ..........................................................................

22. Working principle: .......................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

24. Number and arrangement of cylinders: ........................................................................

Engine capacity: ........................... cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power (g): ...................... kW at ........................ min -1 or maximum

27. continuous rated power (electric motor) ............................ kW ( 1 )

28. Gearbox (type): .............................................................................................................

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

30.1. Track of each steered axle: ............................ mm

30.2. Track of all other axles: ............................ mm

32. Position of loadable axle(s): .........................................................................................

33. Drive axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

Tyre/wheel combination ( h ): .........................................................................................

35. VER|JONI ELETTRONIKA

Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36.

37. Pressure in feed line for trailer braking system: ........................... bar

Coupling device

44. Approval number or approval mark of coupling device (if fitted): .................................

45. Types or classes of coupling devices which can be fitted: .............................................

45.1. Characteristics values ( 1 ): D: ............./ V: .................../ S: ................/ U: ...............

Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: ............................ min -1

Drive-by: ............................ dB(A)

Exhaust emission level ( l ): Euro ............................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1. CO: .......... HC: .......... NOx: ......... HC + NOx: .......... Particulates: ..........

Smoke opacity (ELR): ............................ (m -1 )

2. test procedure: ETC (if applicable)

CO: ........ NOx: ....... NMHC: ....... THC: ........ CH 4 : ........ Particulates: .........

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

Miscellaneous

Remarks ( n ): ................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY N 1

(incomplete vehicles)

Side 2

General construction characteristics

1. Number of axles: .......................................... and wheels: ............................................

Number and position of axles with twin wheels: ...........................................................

3. Powered axles (number, position, interconnection): .....................................................

Main dimensions

Wheelbase ( e ): ............................ mm

4. Axle spacing: 1-2: ............... mm 2-3: ................. mm 3-4: .................. mm

Maximum permissible length: ............................ mm

Maximum permissible width: ............................ mm

Maximum permissible height: ............................ mm

8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): ......... mm

12.1. Maximum permissible rear overhang: ............................ mm

Masses

Mass of the incomplete vehicle in running order: ............................ kg ( f )

14.

14.1. Distribution of this mass amongst the axles: 1. .......... kg 2. .......... kg 3. ........... kg etc.

15. Minimum mass of the vehicle when completed: ............................ kg

15.1. Distribution of this mass amongst the axles: 1. ............ kg 2. ............ kg 3. ............. kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. .......... kg 2. .......... kg 3. ........... kg etc.

16.4. Technically permissible maximum mass of the combination: ............................ kg

18. Technically permissible maximum towable mass in case of

18.1. Drawbar trailer: ............................ kg

18.2. Semi-trailer: ............................ kg

18.3. Centre-axle trailer: ........................... kg

18.4. Unbraked trailer: ............................ kg

VER|JONI ELETTRONIKA

19. Technically permissible maximum static mass at the coupling point: ...................... kg

Power plant

20. Manufacturer of the engine: ..........................................................................................

21. Engine code as marked on the engine: ..........................................................................

22. Working principle: ........................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

24. Number and arrangement of cylinders: .........................................................................

Engine capacity: ........................... cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power ( g ): ........................... kW at .......................... min -1 or maximum

27. continuous rated power (electric motor) ............................ kW ( 1 )

28. Gearbox (type): .............................................................................................................

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

30. Axle(s) track: 1. .......................... mm 2. .......................... mm 3. ......................... mm

Tyre/wheel combination ( h ): .........................................................................................

35. Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36.

37. Pressure in feed line for trailer braking system: ........................... bar

Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45. Types or classes of coupling devices which can be fitted: .............................................

45.1. Characteristics values ( 1 ): D: ............./ V: ............../ S: ............/ U: ................

Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: ............................min -1

Drive-by: ............................ dB(A)

VER|JONI ELETTRONIKA

Exhaust emission level ( l ): Euro ............................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1.1.

CO: .......... HC: .......... NOx: .......... HC + NOx: .......... Particulates: ..........

Smoke opacity (ELR): ............................ (m -1 )

test procedure: Type I (Euro 5 or 6 ( 1 ))

1.2.

CO: .......... THC: .......... NMHC: .......... NOx: .......... THC + NOx: ..........

Particulates (mass): .......... Particles (number): ................

2. test procedure: ETC (if applicable)

CO: ....... NOx: ....... NMHC: ......... THC: ......... CH 4 : ....... Particulates:..........

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

CO 2 emissions/fuel consumption/electric energy consumption ( m )

49.

1. all power train except pure electric vehicles

CO 2 emissions

Fuel consumption

Urban conditions

.............. g/km

............ l/100 km

............ l/100 km / m 3 /100 km ( 1 )

Extra-urban conditions

.............. g/km

............ l/100 km / m 3 /100 km ( 1 )

Combined

.............. g/km

............ l/100 km / m 3 /100 km ( 1 )

Weighted, combined

.............. g/km

2. pure electric vehicles and OVC hybrid electric vehicles

Electric energy consumption (weighted, combined ( 1 )) ........................Wh/km

Electric range ............................ km

Miscellaneous

Remarks ( n ): .................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY N 2

(incomplete vehicles)

Side 2

General construction characteristics

1. Number of axles: ..................................... and wheels: ................................................

Number and position of axles with twin wheels: ...........................................................

2. Steered axles (number, position): .................................................................................

3. Powered axles (number, position, interconnection): .....................................................

Main dimensions

Wheelbase ( e ): ............................ mm

4. Axle spacing: 1-2: ........................ mm 2-3: ....................... mm 3-4: ................. mm

Maximum permissible length: ............................ mm

Maximum permissible width: ............................ mm

8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): ......... mm

12.1. Maximum permissible rear overhang: ............................ mm

Masses

Mass of the incomplete vehicle in running order: ............................ kg ( f )

14.

14.1. Distribution of this mass amongst the axles: 1. ........... kg 2. ........... kg 3. ......... kg etc.

15. Minimum mass of the vehicle when completed: ............................ kg

15.1. Distribution of this mass amongst the axles: 1. ........... kg 2. ........... kg 3. .............. kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. .......... kg 2. .......... kg 3........... kg etc.

16.3. Technically permissible mass on each axle group: 1. ....... kg 2. ...... kg 3. ........ kg etc.

16.4. Technically permissible maximum mass of the combination: ............................ kg

17. Intended registration/in service maximum permissible masses in national/international

traffic ( 1 ) ( o )

17.1. Intended registration/in service maximum permissible laden mass: ......................... kg

17.2. Intended registration/in service maximum permissible laden mass on each axle

VER|JONI ELETTRONIKA

1. ............... kg 2. ............... kg 3. ................ kg

17.3. Intended registration/in service maximum permissible laden mass on each axle group

1. ............... kg 2. ............... kg 3. ................ kg

17.4. Intended registration/in service maximum permissible mass of the combination

............................ kg

18. Technically permissible maximum towable mass in case of

18.1. Drawbar trailer: ............................ kg

18.2. Semi-trailer: ............................ kg

18.3. Centre-axle trailer: ........................... kg

18.4. Unbraked trailer: ............................ kg

19. Technically permissible maximum static mass at the coupling point: ...................... kg

Power plant

20. Manufacturer of the engine: ..........................................................................................

21. Engine code as marked on the engine: ..........................................................................

22. Working principle: ........................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

24. Number and arrangement of cylinders: .........................................................................

Engine capacity: ........................... cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power ( g ): .......................... kW at ........................... min -1 or maximum

27. continuous rated power (electric motor) ............................ kW ( 1 )

28. Gearbox (type): ............................

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

31. Position of retractable axle(s): ......................................................................................

32. Position of loadable axle(s): .........................................................................................

Drive axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

33. Tyre/wheel combination ( h ): .........................................................................................

35. VER|JONI ELETTRONIKA

Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36.

37. Pressure in feed line for trailer braking system: ........................... bar

Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45. Types or classes of coupling devices which can be fitted: .............................................

45.1. Characteristics values ( 1 ): D: .............../ V: ..................../ S: .............../ U: ................

Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: ............................ min -1

Drive-by: ............................ dB(A)

Exhaust emission level ( l ) : Euro ............................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1.1.

CO: .......... HC: .......... NOx : ........ HC + NOx : ......... Particulates: ..........

Smoke opacity (ELR): ............................ (m -1 )

test procedure: Type I (Euro 5 or 6 ( 1 ))

1.2.

CO: .......... THC: .......... NMHC: .......... NOx: .......... THC + NOx: ..........

Particulates (mass): .......... Particles (number): ...................

2. test procedure: ETC (if applicable)

CO: ........ NOx: ........ NMHC: ........ THC: ........ CH 4 : ........ Particulates: ........

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

Miscellaneous

Remarks ( n ): .................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORY N 3

(incomplete vehicles)

Side 2

General construction characteristics

1. Number of axles: ........................................ and wheels: .............................................

Number and position of axles with twin wheels: ...........................................................

2. Steered axles (number, position): ..................................................................................

3. Powered axles (number, position, interconnection): .....................................................

Main dimensions

Wheelbase ( e ): ............................ mm

4. Axle spacing: 1-2: ........................ mm 2-3: .................. mm 3-4: .................. mm

Maximum permissible length: ............................ mm

Maximum permissible width: ............................ mm

8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): ......... mm

12.1. Maximum permissible rear overhang: ............................ mm

Masses

Mass of the incomplete vehicle in running order: ............................ kg ( f )

14.

14.1. Distribution of this mass amongst the axles: 1. ........... kg 2. .......... kg 3. .......... kg etc.

15. Minimum mass of the vehicle when completed: ............................ kg

15.1. Distribution of this mass amongst the axles: 1. ............. kg 2. ............ kg 3. ............ kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. .......... kg 2. ........... kg 3. .......... kg etc.

16.3. Technically permissible mass on each axle group: 1. ....... kg 2. ....... kg 3. ....... kg etc.

16.4. Technically permissible maximum mass of the combination: ............................ kg

17. Intended registration/in service maximum permissible masses in national/international

traffic ( 1 ) ( o )

17.1. Intended registration/in service maximum permissible laden mass: ........................ kg

17.2. Intended registration/in service maximum permissible laden mass on each axle

VER|JONI ELETTRONIKA

1. ............... kg 2. ............... kg 3. ................ kg

17.3. Intended registration/in service maximum permissible laden mass on each axle group

1. ............... kg 2. ............... kg 3. ................ kg

17.4. Intended registration/in service maximum permissible mass of the combination

............................ kg

18. Technically permissible maximum towable mass in case of

18.1. Drawbar trailer: ............................ kg

18.2. Semi-trailer: ............................ kg

18.3. Centre-axle trailer: ........................... kg

18.4. Unbraked trailer: ............................ kg

19. Technically permissible maximum static mass at the coupling point: ...................... kg

Power plant

20. Manufacturer of the engine: ..........................................................................................

21. Engine code as marked on the engine: ..........................................................................

22. Working principle: .......................................................................................................

Pure electric: yes/no ( 1 )

23.

23.1. Hybrid [electric] vehicle: yes/no ( 1 )

24. Number and arrangement of cylinders: .........................................................................

Engine capacity: ........................... cm 3

25. Fuel: Diesel/petrol/LPG/NG - Biomethane/Ethanol/Biodiesel/Hydrogen ( 1 )

26.

26.1. Mono fuel/Bi fuel/Flex fuel ( 1 )

Maximum net power ( g ): .......................... kW at ........................... min -1 or maximum

27. continuous rated power (electric motor) ............................ kW ( 1 )

28. Gearbox (type): ............................

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

31. Position of retractable axle(s): ......................................................................................

32. Position of loadable axle(s): .........................................................................................

Drive axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

33. Tyre/wheel combination ( h ): .........................................................................................

35. VER|JONI ELETTRONIKA

Brakes

Trailer brake connections mechanical/electric/pneumatic/hydraulic ( 1 )

36.

37. Pressure in feed line for trailer braking system: ........................... bar

Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45. Types or classes of coupling devices which can be fitted: .............................................

45.1. Characteristics values ( 1 ): D: ............./ V: ............../ S: ...................../ U: ..................

Environmental performances

46. Sound level

Stationary: ............................ dB(A) at engine speed: ............................ min -1

Drive-by: ............................ dB(A)

Exhaust emission level ( l ): Euro ............................

47. Exhaust emissions ( m )

48. Number of the base regulatory act and latest amending regulatory act applicable: .......

test procedure: Type I or ESC ( 1 )

1. CO: .......... HC: .......... NOx: ......... HC + NOx: .......... Particulates: ..........

Smoke opacity (ELR): ............................ (m -1 )

2. test procedure: ETC (if applicable)

CO: ........ NOx: ....... NMHC: ........ THC: ........ CH 4 : ........ Particulates: ........

48.1. Smoke corrected absorption coefficient: ............................ (m -1 )

Miscellaneous

Remarks ( n ): ................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORIES O 1 AND O 2

(incomplete vehicles)

Side 2

General construction characteristics

1. Number of axles: ........................................... and wheels: ...........................................

1.1.

Number and position of axles with twin wheels: ...........................................................

Main dimensions

Wheelbase ( e ): ............................ mm

4.

4.1.

Axle spacing: 1-2: .............. mm 2-3: ................. mm 3-4: ............... mm

5.1.

Maximum permissible length: ............................ mm

6.1.

Maximum permissible width: ............................ mm

7.1.

Maximum permissible height: ............................ mm

10. Distance between the centre of the coupling device and the rear end of the vehicle

......................... mm

12.1. Maximum permissible rear overhang: ............................ mm

Masses

Mass of the incomplete vehicle in running order: ............................ kg ( f )

14.

14.1. Distribution of this mass amongst the axles: 1. .......... kg 2. .......... kg 3. ........... kg etc.

15. Minimum mass of the vehicle when completed: ............................ kg

15.1. Distribution of this mass amongst the axles: 1. ............ kg 2. ............ kg 3. ............. kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. .......... kg 2. .......... kg 3. ........... kg etc.

16.3. Technically permissible mass on each axle group: 1. ....... kg 2. ....... kg 3. ....... kg etc.

19.1. Technically permissible maximum static mass on the coupling point of a semi-trailer

or centre-axle trailer: ........................... kg

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

30.1. Track of each steered axle: ............................ mm

VER|JONI ELETTRONIKA

30.2. Track of all other axles: ............................ mm

31. Position of retractable axle(s): ......................................................................................

32. Position of loadable axle(s): .........................................................................................

Axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

34. Tyre/wheel combination ( h ): .........................................................................................

35. Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45. Types or classes of coupling devices which can be fitted: .............................................

45.1. Characteristics values ( 1 ): D: .........../ V: .............../ S: .............../ U: .................

Miscellaneous

Remarks ( n ): .................................................................................................................

52. VER|JONI ELETTRONIKA

SIDE 2

VEHICLE CATEGORIES O 3 AND O 4

(incomplete vehicles)

Side 2

General construction characteristics

1. Number of axles: ........................................ and wheels: .............................................

Number and position of axles with twin wheels: ...........................................................

2. Steered axle (number, position): ...................................................................................

Main dimensions

Wheelbase ( e ): .......................... mm

4. Axle spacing: 1-2: ................... mm 2-3: ..................... mm 3-4: ..................... mm

Maximum permissible length: ............................ mm

Maximum permissible width: ............................ mm

Maximum permissible height: ............................ mm

10. Distance between the centre of the coupling device and the rear end of the vehicle

........................... mm

12.1. Maximum permissible rear overhang: ............................ mm

Masses

Mass of the incomplete vehicle in running order: ............................ kg ( f )

14.

14.1. Distribution of this mass amongst the axles: 1. .......... kg 2. ........... kg 3. .......... kg etc.

15. Minimum mass of the vehicle when completed: ............................ kg

15.1. Distribution of this mass amongst the axles: 1. ........... kg 2. ........... kg 3. .............. kg

16. Technically permissible maximum masses

16.1. Technically permissible maximum laden mass: ............................ kg

16.2. Technically permissible mass on each axle: 1. .......... kg 2. .......... kg 3. ........... kg etc.

16.3. Technically permissible mass on each axle group: 1. ....... kg 2. ....... kg 3. ....... kg etc.

17. Intended registration/in service maximum permissible masses in national/international

traffic ( 1 ) ( o )

17.1. Intended registration/in service maximum permissible laden mass: ........................ kg

17.2. Intended registration/in service maximum permissible laden mass on each axle

1. ............... kg 2. ............... kg 3. ................ kg

VER|JONI ELETTRONIKA

17.3. Intended registration/in service maximum permissible laden mass on each axle group

1. ............... kg 2. ............... kg 3. ................ kg

19.1. Technically permissible maximum static mass on the coupling point of a semi-trailer

or centre-axle trailer: ..................... kg

Maximum speed

29. Maximum speed: ............................ km/h

Axles and suspension

31. Position of retractable axle(s): ......................................................................................

32. Position of loadable axle(s): ..........................................................................................

Axle(s) fitted with air suspension or equivalent: yes/no ( 1 )

34. Tyre/wheel combination ( h ): .........................................................................................

35. Coupling device

44. Approval number or approval mark of coupling device (if fitted): ................................

45. Types or classes of coupling devices which can be fitted: .............................................

45.1. Characteristics values ( 1 ): D: ............./ V: .............../ S: ............../ U: ................

Miscellaneous

Remarks ( n ): ............................

52. Explanatory notes relating to Schedule IX

(1)

Delete where not applicable

(a)

Indicate the identification code. This code shall contain not more than 25 characters for a variant

and not more than 35 characters for a version.

(b)

Indicate whether the vehicle is suitable for use in either right or left-hand traffic or both right

and left-hand traffic.

(c)

Indicate whether the speedometer fitted has metric or both metric and imperial units.

(d)

This statement shall not restrict the right of the Member States to require technical adaptations

in order to allow the registration of a vehicle in a Member State other than the one for which it

was intended when the direction of the traffic is on the opposite side of the road.

(e)

This entry shall be only completed when the vehicle has two axles.

(f)

This mass shall include the mass of the driver and the mass of the crew member if there is a

crew seat in the vehicle.

With respect to vehicles belonging to category M 1 , N 1 , O 1 , O 2 or M 2 under 3,5 tonnes, the

actual mass may vary by 5% with respect to the mass stated in this entry.

The variation shall be 3% for all other vehicle categories.

VER|JONI ELETTRONIKA

(g)

For hybrid electric vehicles, indicate both power outputs.

(h)

Optional equipment under this letter can be added under entry “Remarks”.

(i)

The codes described in Schedule II Letter C shall be used.

(j)

Indicate only the basic colour(s) as follows: white, yellow, orange, red, violet, blue, green, grey,

brown or black.

(k)

Excluding seats designated for use only when the vehicle is stationary and the number of

wheelchair positions.

For coaches belonging to the vehicle category M 3 the number of crew members shall be

included in the passenger number.

(l)

Add the number of the Euro level and the character corresponding to the provisions used for

type-approval.

(m)

Repeat for the various fuels which can be used. Vehicles, which can be fuelled with both petrol

and gaseous fuel but where the petrol system is fitted for emergency purposes or starting only

and of which the petrol tank cannot contain more than 15 litres of petrol, will be regarded as

vehicles which can only run a gaseous fuel.

(n)

If the vehicle is equipped with 24 GHz short-range radar equipment in accordance with

Commission Decision 2005/50/EC (OJ L 21, 25.1.2005, p. 15), the manufacturer shall indicate

here: “Vehicle equipped with 24 GHz short-range radar equipment”.

(o)

The manufacturer may complete these entries either for international traffic or national traffic or

both.

For national traffic, the code of the country where the vehicle is intended to be registered shall

be mentioned. The code shall be in accordance with standard ISO 3166-1:2006.

For international traffic, the directive number shall be referred to (e.g. “96/53/EC” for Council

Directive 96/53/EC).’EN 13.5.2009 Official Journal of the European Union L 118/65. ".

VER|JONI ELETTRONIKA

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 7 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

STEERING

Schematic diagram of steered axle(s) showing steering geometry: .............................

Transmission and control

Type of steering transmission (specify for front and rear, if applicable): ........................

Linkage to wheels (including other than mechanical means; specify for front and rear, if

applicable): ..............................................................................................................................

A brief description of the electrical/electronic components (if any): .......................................

Method of assistance (if any): ...................................................................................................

Method and diagram of operation, make(s) and type(s): ..................................................

Diagram of the steering equipment as a whole, showing the position on the vehicle of the

various devices influencing its steering behaviour: ...................................................................

VER|JONI ELETTRONIKA

Schematic diagram(s) of the steering control(s): .................................................................

Range and method of adjustment (if any), of the steering control: ..................................

Maximum steering angle of the wheels

To the right: ............. degrees; number of turns of the steering wheel (or equivalent

data): .................................................................................................................................

To the left: ............. degrees; number of turns of the steering wheel (or equivalent

data): .....................................................................................................................................

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Schedule Vii — EC Type-Approval of Motor Vehicles and their Trailers Open official source

" SCHEDULE XI

[Regulations 3, 6(2) and (3), 9(1)(b), (2), (4) and (5), 10(1), 12(2)(b) and 28(1)]

LIST OF REGULATORY ACTS SETTING THE REQUIREMENTS FOR THE PURPOSE

OF EC TYPEAPPROVAL OF SPECIAL PURPOSE VEHICLES

Appendix 1

Motor-Caravans, Ambulances and Hearses

Subject

Regulatory act

M 1 ≤

M 1 >

2 500( 1 ) kg 2 500 ( 1 ) kg

reference

Permissible sound level

Directive

H

G + H

70/157/EEC

Emissions

Directive

Q

G + Q

70/220/EEC

Emissions (Euro 5 and 6) light-

Regulation

Q

G + Q

duty vehicles/access to information (EC) 715/2007

Fuel tanks/rear protective devices

Directive

F

70/221/EEC

Rear registration plate space

Directive

X

70/222/EEC

Steering effort

Directive

X

G

70/311/EEC

Door latches and hinges

Directive

B

G + B

70/387/EEC

Audible warning

Directive

X

70/388/EEC

Devices for indirect vision

2003/97/EC

X

G

Braking

Directive

X

G

71/320/EEC

Radio interference (electromagnetic Directive

X

compatibility)

72/245/EEC

Diesel smoke

Directive

H

72/306/EEC

Interior fittings

Directive

C

G + C

74/60/EEC

Anti-theft and immobiliser

Directive

X

G

74/61/EEC

Protective steering

Directive

X

G

74/297/EEC

Seat strength

Directive

D

G + D

74/408/EEC

Exterior projections

Directive

X for the

G for the

74/483/EEC

cab; A for

the

remaining

part

VER|JONI ELETTRONIKA

Item

Subject

Regulatory act

M 1 ≤

M 1 >

2 500( 1 ) kg 2 500 ( 1 ) kg

reference

Speedometer and reverse gear

Directive

X

75/443/EEC

Plates (statutory)

Directive

X

76/114/EEC

Seat belt anchorages

Directive

D

G + L

76/115/EEC

Installation of lighting and light

Directive

A + N

A+G+N for A+G+N for A+ G+ N for

signalling devices

76/756/EEC

the cab; A + the cab; A + the cab; A +

N for the

remaining remaining remaining

part

Retro reflectors

Directive

X

76/757/EEC

End-outline, front-side, rear-side,

Directive

X

stop, day time running, side-

76/758/EEC

marker lamps

Direction indicators

Directive

X

76/759/EEC

Rear registration plate lamps

Directive

X

76/760/EEC

Head lamps (including bulbs)

Directive

X

76/761/EEC

Front fog lamps

Directive

X

76/762/EEC

27 Towing hooks

Directive

E

77/389/EEC

28 Rear fog lamps

Directive

X

77/538/EEC

29 Reversing lamps

Directive

X

77/539/EEC

30 Parking lamps

Directive

X

77/540/EEC

31 Seat belts and restraint systems

Directive

D

G + M

77/541/EEC

32 Forward vision

Directive

X

G

77/649/EEC

33 Identification of controls, tell-tales

Directive

X

and indicators

78/316/EEC

34 Defrost/demist

Directive

X

G + O

O

78/317/EEC

35 Wash/wipe

Directive

X

G + O

O

78/318/EEC

36 Heating systems

Directive

X

2001/56/EC

37 Wheel guards

Directive

X

G

78/549/EEC

38 Head restraints

Directive

D

G + D

78/932/EEC

VER|JONI ELETTRONIKA

Item

Subject

Regulatory act

M 1 ≤

M 1 >

2 500( 1 ) kg 2 500 ( 1 ) kg

reference

39 CO 2 emissions/fuel consumption

Directive

N/A

80/1268/EEC

40 Engine power (shall be repealed with

Directive

X

effect from 31st December 2013)

80/1269/EEC

41 Emissions (Euro IV and V) heavy-

Directive

H

G + H

duty vehicles (shall be repealed with

2005/55/EC

effect from 31st Dec 2013)

41a Emissions (Euro VI) heavy-duty

Regulation

G + H

vehicles/access to information (shall (EC) 595/2009

apply from 31 Dec 2013)

44 Masses and dimensions (cars)

Directive

X

92/21/EEC

45 Safety glazing

Directive

J

G + J

92/22/EEC

46 Tyres

Directive

X

G

92/23/EEC

47 Speed limitation devices

Directive

X

92/24/EEC

48 Masses and dimensions (other than Directive

X

vehicles referred to in item 44)

97/27/EC

50 Couplings

Directive

X

G

94/20/EC

51 Flammability

Directive

G for the

95/28/EC

cab; X for

the

remaining

part

52 Buses and coaches

Directive

A

2001/85/EC

53 Front impact

Directive

N/A

96/79/EC

54 Side impact

Directive

N/A

96/27/EC

58 Pedestrian protection

Regulation

X

N/A (*)

(EC) 78/2009

59 Recyclability

Directive

N/A

2005/64/EC

61 Air-conditioning system

Directive

X

2006/40/EC

62 Hydrogen system

Regulation

Q

G + Q

(EC) 79/2009

( 1 ) Technically permissible maximum laden mass.

(2) Not exceeding 3,5 tonnes maximum laden mass.

(*) Any frontal protection system supplied with the vehicle shall comply with the requirements of Regulation

(EC) No 78/2009, shall be provided with a type approval and shall be marked accordingly.

VER|JONI ELETTRONIKA

Appendix 2

Armoured Vehicles

Item

Subject

Regulatory act

reference

Permissible sound level

Directive

X

70/157/EEC

Emissions

Directive

A

70/220/EEC

2a Emissions (Euro 5 and 6) Regulation

A

light-duty vehicles/access (EC) 715/2007

to information

Fuel tanks/rear protective

Directive

X

devices

70/221/EEC

Rear registration plate

Directive

X

space

70/222/EEC

Steering effort

Directive

X

70/311/EEC

Door latches and hinges

Directive

X

70/387/EEC

Audible warning

Directive

A+K A+K A+K A+K A+K A+K

70/388/EEC

Devices for indirect

Directive

A

vision

2003/97/EC

Braking

Directive

X

71/320/EEC

10 Radio interference

Directive

X

(electromagnetic

72/245/EEC

compatibility)

11 Diesel smoke

Directive

X

72/306/EEC

12 Interior fittings

Directive

A

74/60/EEC

13 Anti-theft and

Directive

X

immobiliser

74/61/EEC

14 Protective steering

Directive

N/A

74/297/EEC

15 Seat strength

Directive

X

D

74/408/EEC

16 Exterior projections

Directive

A

74/483/EEC

17 Speedometer and reverse

Directive

X

gear

75/443/EEC

18 Plates (statutory)

Directive

X

76/114/EEC

19 Seat belt anchorages

Directive

A

76/115/EEC

20 Installation of lighting and

Directive

A+N A+N A+N A+N A+N A+N A+N A+N A+N A+N

light signalling devices

76/756/EEC

21 Retro reflectors

Directive

X

76/757/EEC

VER|JONI ELETTRONIKA

Item

Subject

Regulatory act

reference

22 End-outline, front-side,

Directive

X

rear-side, stop, day time

76/758/EEC

running, side-marker

lamps

23 Direction indicators

Directive

X

76/759/EEC

24 Rear registration plate

Directive

X

lamps

76/760/EEC

25 Headlamps (including

Directive

X

bulbs)

76/761/EEC

26 Front fog lamps

Directive

X

76/762/EEC

27 Towing hooks

Directive

A

77/389/EEC

28 Rear fog lamps

Directive

X

77/538/EEC

29 Reversing lamps

Directive

X

77/539/EEC

30 Parking lamps

Directive

X

77/540/EEC

31 Seat belts and

Directive

A

restraint systems

77/541/EEC

32 Forward vision

Directive

S

77/649/EEC

33 Identification of

Directive

X

controls tell-tales and

78/316/EEC

indicators

34 Defrost/demist

Directive

A

O

78/317/EEC

35 Wash/wipe

Directive

A

O

78/318/EEC

36 Heating systems

Directive

X

2001/56/EC

37 Wheel guards

Directive

X

78/549/EEC

38 Head restraints

Directive

X

78/932/EEC

39 CO 2 emissions/fuel

Directive

N/A

80/1268/EEC

consumption

40 Engine power (shall be

Directive

X

repealed with effect from 80/1269/EEC

31st Dec 2013)

41 Emissions (Euro IV and

Directive

A

X

V) heavy-duty vehicles

2055/55/EC

(shall be repealed with

effect from 31st Dec

2013)

VER|JONI ELETTRONIKA

Item

Subject

Regulatory act

reference

41a Emissions (Euro VI)

Regulation

X

heavy-duty vehicles/

(EC) 595/2009

access to information

(shall apply from 31 Dec

2013)

42 Lateral protection

Directive

X

89/297/EEC

43 Spray suppression

Directive

X

systems

91/226/EEC

44 Masses and

Directive

X

dimensions (cars)

92/21/EEC

45 Safety glazing

Directive

N/A N/A N/A

N/A

92/22/EEC

46 Tyres

Directive

A

92/23/EEC

47 Speed limitation devices

Directive

X

92/24/EEC

48 Masses and

Directive

X

dimensions (other

97/27/EC

than vehicles referred

to in item 44)

49 External projections

Directive

A

of cabs

92/114/EEC

50 Couplings

Directive

X

94/20/EC

51 Flammability

Directive

X

95/28/EC

52 Buses and coaches

Directive

A

2001/85/EC

53 Front impact

Directive

N/A

96/79/EC

54 Side impact

Directive

N/A

96/27/EC

X( 1 ) X( 1 )

X( 1 )

56 Vehicles intended for

Directive

the transport of

98/91/EC

dangerous goods

57 Front underrun

Directive

X

protection

2000/40/EC

58 Pedestrian protection

Regulation

N/A

(EC) 78/2005

59 Recyclability

Directive

N/A

2005/64/EC

61 Air-conditioning

Directive

X

Z

system

2006/40/EC

62 Hydrogen system

Regulation

A

(EC) 79/2009

( 1 ) The requirements of Directive 98/91/EC are only applicable when the manufacturer applies for the EC type-approval of a

vehicle intended for the transport of dangerous goods.

VER|JONI ELETTRONIKA

Appendix 3

Wheel-chair accessible vehicles

Item

Subject

Regulatory act reference

Permissible sound level

Directive 70/157/EEC

Emissions

Directive 70/220/EEC

2a Em is si on s ( Eur o 5 an d 6 ) lig h t- du ty Regulation (EC) 715/2007

vehicles/ access to information

Fuel tanks/rear protective devices

Directive 70/221/EEC

Rear registration plate space

Directive 70/222/EEC

Steering effort

Directive 70/311/EEC

Door latches and hinges

Directive 70/387/EEC

Audible warning

Directive 70/388/EEC

Indirect vision devices

Directive 2003/97/EEC

Braking

Directive 71/320/EEC

10 R ad i o i n ter f e r en ce ( el ec tr o m ag n e ti c Directive 72/245/EEC

compatibility)

11 Diesel smoke

Directive 72/306/EEC

12 Interior fittings

Directive 74/60/EEC

13 Anti-theft and immobiliser

Directive 74/61/EEC

14 Protective steering

Directive 74/297/EEC

15 Seat strength

Directive 74/408/EEC

16 Exterior projection

Directive 74/483/EEC

17 Speedometer and reverse gear

Directive 75/443/EEC

18 Plates (statutory)

Directive 76/114/EEC

19 Seat belt anchorages

Directive 76/115/EEC

20 I n s t a l l a t i o n o f l i g h t i n g a n d l i g h t Directive 76/756/EEC

signalling devices

21 Reflex reflectors

Directive 76/757/EEC

22 End-outline, front position (side), rear-position Directive 76/758/EEC

(side), stop, side marker, daytime running

lamps

23 Direction indicators

Directive 76/759/EEC

24 Rear registration plate lamps

Directive 76/760/EEC

25 Headlamps (including bulbs)

Directive 76/761/EEC

26 Front fog lamps

Directive 76/762/EEC

27 Towing hooks

Directive 77/389/EEC

28 Rear fog lamps

Directive 77/538/EEC

29 Reversing lamps

Directive 77/539/EEC

30 Parking lamps

Directive 77/540/EEC

31 Seat belts and restraint systems

Directive 77/541/EEC

32 Forward vision

Directive 77/649/EEC

33 Identification of controls, tell-tales and Directive 78/316/EEC

indicators

34 Defrost/demist

Directive 78/317/EEC

35 Wash/wipe

Directive 78/318/EEC

36 Heating systems

Directive 2001/56/EC

37 Wheel guards

Directive 78/549/EEC

VER|JONI ELETTRONIKA

Item

Subject

Regulatory act reference

39 CO 2 emissions/fuel consumption

Directive 80/1268/EEC

X + W 7

40 Engine power (shall be repealed with effect Directive 80/1269/EEC

X

from 31st Dec 2013)

Diesel emissions (shall be repealed with effect Directive 2005/55/EC

X

from 31st Dec 2013)

41a

Emissions (Euro VI) heavy duty vehicles/ Regulation (EC) 595/2005

X

access to information. (shall apply from 31st

Dec 2013)

Masses and dimensions (cars)

Directive 92/21/EEC

X + W 8

Safety glazing

Directive 92/22/EEC

X

Tyres

Directive 92/23/EEC

X

Couplings

Directive 94/20/EC

X

Frontal impact

Directive 96/79/EC

X + W 9

Side impact

Directive 96/27/EC

X + W 10

Pedestrian protection

Regulation (EC) 78/2009

X

Recyclability

Directive 2005/64/EC

N/A

Air conditioning systems

Directive 2006/40/EC

X

Hydrogen system

Regulation (EC) 79/2009

X

Appendix 4

Other Special Purpose Vehicles (including trailer caravans)

Application of the exemptions is only permitted if the manufacturer demonstrates to the satisfaction of the

approval authority that the vehicle, due to the special function, can not meet all the requirements.

Item

Subject

Regulatory act

reference

Permissible sound level Directive 70/157/EEC

H

Emissions

Directive 70/220/EEC

Q

2a

Emissions (Euro 5 and

Regulation (EC)

Q

6) light-duty vehicles/

715/2007

access to information

Fuel tanks/rear

Directive 70/221/EEC

F

X

protective devices

Rear registration

Directive 70/222/EEC A+R A+R A+R A+R A+R

A+R A+R

A+R

plate space

Steering effort

Directive 70/311/EEC

X

Door latches and hinges

Directive 70/387/EEC

B

Audible warning

Directive 70/388/EEC

X

Indirect vision devices

Directive

X

2003/97/EEC

Braking

Directive 71/320/EEC

X

Radio interference

Directive 72/245/EEC

X

(electromagnetic

compatibility)

Diesel smoke

Directive 72/306/EEC

H

Anti-theft and

Directive 74/61/EEC

X

immobiliser

VER|JONI ELETTRONIKA

Item

Subject

Regulatory act

reference

Protective steering

Directive 74/297/EEC

X

Seat strength

Directive 74/408/EEC

D

Speedometer and

Directive 75/443/EEC

X

reverse gear

Plates (statutory)

Directive 76/114/EEC

X

Seat belt anchorages

Directive 76/115/EEC

D

Installation of lighting

Directive 76/756/EEC A+N A+N A+N A+N A+N A+N A+N A+N

A+N

and light signalling

devices

Retro reflectors

Directive 76/757/EEC

X

End-outline, front-

Directive 76/758/EEC

X

side, rear-side, stop,

day time running,

side-marker lamps

Direction indicators

Directive 76/759/EEC

X

Rear registration

Directive 76/760/EEC

X

plate lamps

Head lamps

Directive 76/761/EEC

X

(including bulbs)

Front fog lamps

Directive 76/762/EEC

X

Towing hooks

Directive 77/389/EEC

A

Rear fog lamps

Directive 77/538/EEC

X

Reversing lamps

Directive 77/539/EEC

X

Parking lamps

Directive 77/540/EEC

X

Seat belts and

Directive 77/541/EEC

D

restraint systems

Identification of

Directive 78/316/EEC

X

controls, tell-tales

and indicators

Defrost/demist

Directive 78/317/EEC

O

Wash/wipe

Directive 78/318/EEC

O

Heating systems

Directive 2001/56/EC

X

Engine power

Directive

X

(shall be repealed

80/1269/EEC

with effect from 31

Dec 2013)

Emissions (Euro

Directive

H

IV and V) heavy-

2005/55/EEC

duty vehicles (shall

be repealed with

effect from 31 Dec

2013)

41a Emissions (Euro

Regulation (EC)

H

VI) heavy-duty

595/2009

vehicles/access to

information

Lateral protection

Directive 89/297/EEC

X

Spray suppression

Directive 91/226/EEC

X

systems

VER|JONI ELETTRONIKA

Item

Subject

Regulatory act

reference

Safety glazing

Directive 92/22/EEC

J

Tyres

Directive 92/23/EEC

X

Speed limitation

Directive 92/24/EEC

X

devices

Masses and

Directive 97/27/EC

X

dimensions

External

Directive 92/114/EEC

X

projections of cabs

Couplings

Directive 94/20/EC

X

Flammability

Directive 95/28/EC

X

Buses and coaches

Directive 2001/85/EC

X

Side impact

Directive 96/27/EC

A

Vehicles intended

Directive 98/91/EC

X

for the transport of

dangerous goods

Front under-run

Directive 2000/40/EC

X

protection

Pedestrian

Regulation (EC)

N/A

protection

78/2009

(*)

Recyclability

Directive 2005/64/EC

N/A

Air-conditioning

Directive 2006/40/EC

Z

system

Hydrogen system

Regulation (EC)

Q

79/2009

Appendix 5

Mobile Cranes

Item

Subject

Regulatory act

Mobile crane of

reference

category N 1

Permissible sound level

Directive 70/157/EEC

T

Emissions

Directive 70/220/EEC

X

2a

Emissions (Euro 5 and 6) light-duty

Regulation (EC)

N/A

vehicles/access to information

715/2007

Fuel tanks/rear protective devices

Directive 70/221/EEC

X

Rear registration plate space

Directive 70/222/EEC

X

Steering effort

Directive 70/311/EEC

X crab steering

allowed

Door latches and hinges

Directive 70/387/EEC

A

Audible warning

Directive 70/388/EEC

X

Indirect vision devices

Directive 2003/97/EC

X

Braking

Directive 71/320/EEC

U

Radio interference (electromagnetic

Directive 72/245/EEC

X

compatibility)

Diesel smoke

Directive 72/306/EEC

X

VER|JONI ELETTRONIKA

Item

Subject

Regulatory act

Mobile crane of

reference

category N 1

Interior fittings

Directive 74/60/EEC

X

Anti-theft and immobiliser

Directive 74/61/EEC

X

Seat strength

Directive 74/408/EEC

D

Speedometer and reverse gear

Directive 75/443/EEC

X

Plates (statutory)

Directive 76/114/EEC

X

Seat belt anchorages

Directive 76/115/EEC

D

Installation of lighting and light signalling

Directive 76/756/EEC

A + Y

devices

Reflex reflectors

Directive 76/757/EEC

X

End-outline, front position (side), rear-position

Directive 76/758/EEC

X

(side), stop, side marker, daytime running

lamps

Direction indicators

Directive 76/759/EEC

X

Rear registration plate lamps

Directive 76/760/EEC

X

Headlamps (including bulbs)

Directive 76/761/EEC

X

Front fog lamps

Directive 76/762/EEC

X

Towing hooks

Directive 77/389/EEC

A

Rear fog lamps

Directive 77/538/EEC

X

Reversing lamps

Directive 77/539/EEC

X

Parking lamps

Directive 77/540/EEC

X

Seat belts and restraint systems

Directive 77/541/EEC

D

Identification of controls, tell-tales and

Directive 78/316/EEC

X

infdicators

Defrost/demist

Directive 78/317/EEC

O

Wash/wipe

Directive 78/318/EEC

O

Heating systems

Directive 2001/56/EC

X

Engine power (shall be repealed as from 31 Dec

Directive 80/1269/EEC

X

2013)

Emissions (Euro IV and V) - heavy-duty

Directive 2005/55/EC

V

vehicles (shall be repealed as from 31st Dec 2013)

41a

Emissions (Euro VI) heavy duty vehicles/

Regulation (EC)

V

access to information

595/2005

Lateral protection

Directive 89/297/EEC

X

Spray-suppression systems

Directive 91/226/EEC

X

Safety glazing

Directive 92/22/EEC

J

Tyres

Directive 92/23/EEC

A, provided that

the requirements

in ISO 10571-

1995 (E) or

ETRTO

Standards Manual

1998 are fulfilled.

Speed limitation devices

Directive 92/24/EEC

X

Masses and dimensions

Directive 97/27/EC

X

External projections of cabs

Directive 92/114/EEC

X

Couplings

Directive 94/20/EC

X

Front under-run protection

Directive 2000/40/EC

X

Hydrogen system

Regulation (EC) 79/2009

X

VER|JONI ELETTRONIKA

Meaning of letters

No exemptions except those specified in the regulatory act.

This regulatory act is not applicable to this vehicle (no requirements).

N/A* Any frontal protection system supplied with the vehicle shall comply with the requirements of

Regulation (EC) No 78/2009, shall be provided with a type- approval number and shall be marked

accordingly.

Exemption permitted where special purposes make it impossible to fully comply. The manufacturer shall

demonstrate this to the satisfaction of the type-approval authority that the vehicle cannot meet the

requirements due to its special purpose.

Application limited to doors giving access to the seats designated for normal use when the vehicle is

travelling on the road and where the distance between the R point of the seat and the average plane of the

door surface, measured perpendicular to the longitudinal medium plane of the vehicle, does not exceed

500 mm.

Application limited to that part of the vehicle in front of the rearmost seat designated for normal use

when the vehicle is travelling on the road and also limited to the head impact zone as defined in Directive

74/60/EEC.

Application limited to seats designated for normal use when the vehicle is travelling on the road. Seats

which are designated for use when the vehicle is travelling on the road shall be clearly identified to users

either by means of a pictogram or a sign with an appropriate text.

Front only.

Modification to the routing and length of the refuelling duct and re-positioning of the tank inboard is

permissible.

Requirements according to the category of the base/incomplete vehicle (the chassis of which was used to

build the special purpose vehicle). In the case of incomplete/completed vehicles, it is acceptable that the

requirements for vehicles of the corresponding category N (based on max. mass) are satisfied.

Modification of exhaust system length after the last silencer not exceeding 2 m is permissible without any

further test.

For all window glazing other than driver’s cab glazing (windshield and side glasses), the material may be

either of safety glass or rigid plastic glazing.

Additional panic alarm devices permitted.

Application limited to seats designated for normal use when the vehicle is travelling on the road. At least

anchorages for lap belts are required in the rear seating positions. Seats which are designated for use when

the vehicle is travelling on the road shall be clearly identified to users either by means of a pictogram or a

sign with an appropriate text.

Application limited to seats designated for normal use when the vehicle is travelling on the road. At least lap

belts are required in all rear seating positions. Seats which are designated for use when the vehicle is

travelling on the road shall be clearly identified to users either by means of a pictogram or a sign with an

appropriate text.

Provided that all mandatory lighting devices are installed and that the geometric visibility is not affected.

The vehicle shall be fitted with an adequate system in the front.

Modification of exhaust system length after the last silencer not exceeding 2 m is permissible without any

further test. An EC type-approval issued to the most representative base vehicle remains valid irrespective of

change in the reference weight.

VER|JONI ELETTRONIKA

Provided that the registration plates of all Member States can be mounted and remain visible.

The light transmission factor is at least 60%, also the ‘A’ pillar obstruction angle is not more than 10°.

Test to be performed only with the complete/completed vehicle. The vehicle can be tested according

to Directive 70/157/EEC as last amended by 1999/101/EC. Concerning item 5.2.2.1 of Annex I

to Directive 70/157/EEC the following limit values are applicable

(a)

81 dB(A) for vehicles with an engine power of less than 75 kW

(b)

83 dB(A) for vehicles with an engine power of not less than 75 kW but less than 150 kW

(c)

84 dB(A) for vehicles with an engine power of not less than 150 kW.

Test to be performed only with the complete/completed vehicle. Vehicles up to 4 axles shall comply with

all the requirements laid down by Directive 71/320/EEC. Derogations are admitted for vehicles having more

than 4 axles, provided that

they are justified by the particular construction of all the braking performances, related to parking, service

and secondary braking laid down by Directive 71/320/EEC are fulfilled.

The compliance with Directive 97/68/EC can be accepted.

Requirements must be complied with, but modification in the exhaust system is permitted without any

further test provided the emission control devices including particulate filters (if any) are not affected. No

new evaporative test shall be required on the modified vehicle on condition that the evaporative control

devices are kept as fitted by the manufacturer of the base vehicle.

An EC type-approval issued to the most representative base vehicle remains valid irrespective of change in

the reference mass.

Requirements must be complied with, but modification of the routing, length of the refuelling duct, fuel

hoses and fuel vapour pipes is permitted. Re-location of the original fuel tank is permitted.

A wheel-chair location is considered as a seating position. For each wheel-chair sufficient space shall be

provided. The longitudinal plane of the special area shall be parallel to the longitudinal plane of the

vehicle.

Appropriate information shall be made available to the vehicle owner that a wheel-chair used as a seat in the

vehicle shall be capable of withstanding the forces transmitted by the tie-down mechanism during the various

driving conditions.

Appropriate adaptations may be made to the seats of the vehicle provided that their anchorages,

mechanisms and head restraints guarantee the same level of performance provided for in the Directive.

Compliance with the Directive shall be required for the boarding aids when in the resting position.

Each wheel-chair location shall be fitted with an integrated restraint system which consists of a

restraint system for the wheel-chair and a restraint system for the wheel-chair user.

Anchorages for restraint systems shall resist forces as prescribed in Directive 76/115/EEC and in

Standard ISO 10542-1: 2001.

Webbings and hardware intended to secure the wheel-chair (tie-down mechanisms) shall meet the

requirements of Directive 77/541/EEC and of the relevant part of Standard ISO 10542.

Tests shall be performed by the technical service which has been appointed for testing and checking in

accordance with the Directives referred to above. The criteria are those included in these Directives. Tests

shall be performed with the surrogate wheel-chair described in Standard ISO 10542.

When, due to the conversion, anchorage points for the safety belts need to be moved outside the

tolerance provided for in point 2.7.8.1. of Annex I to Directive 77/541/EEC, the technical service shall

check whether the alteration constitutes a worst case or not. If that is the case, the test provided for in Annex

VER|JONI ELETTRONIKA

VII to Directive 77/541/EEC shall be performed. Extension to the EC type-approval does not need to be

issued.

A new measurement relating to CO 2 emissions does not need to be performed when, in application of

the provisions under W 1 , no fresh tests have to be performed with regard to tail pipe emissions.

For the purposes of calculations, the mass of the wheel-chair including the user shall be assumed to

be 100 kg. The mass shall be concentrated at the H point of the three-dimensional machine.

The technical service shall also consider the possibility to use electric wheelchair(s), the mass of which,

including the user, is assumed to be 250 kg. Any limitation in the passenger capacity resulting from the use of

electric wheel-chair(s) shall be recorded in the type-approval certificate and an appropriate language thereto

shall be included in the certificate of conformity.

No new test shall be required on the modified vehicle on condition that the front part of the chassis

located in front of the R point of the driver is not affected by the conversion of the vehicle and no part of

the supplementary restraint system (air-bag(s)) has been removed or deactivated.

No new test shall be required on the modified vehicle on condition that the side reinforcements have

not been altered and no part of the supplementary restraint system (side air-bag(s)) has been removed or

deactivated.

Provided that all mandatory lighting devices are installed.

Only for vehicles of category N 1 , class I, as described in the first table in point 5.3.1.4. of Annex

I to Directive 70,220/EEC. ".

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 8 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

BRAKES

The following particulars, including means of identification, where applicable, are to

be given

Type and characteristics of the brakes (as defined in point 1.6 of Annex I to Council

Directive 71/320/EEC (OJ L 205, 6.9.1971, p. 37)) including details and drawings of

the drums, discs, hoses make and type of shoe/pad assemblies and/or linings, effective

braking areas, radius of drums, shoes or discs, mass of drums, adjustment devices,

relevant parts of the axle(s) and suspension: .....................................................................

Operating diagram, description and/or drawing of the braking system described in

point 1.2 of Annex I to Directive 71/320/EEC including details and drawings of the

transmission and controls: ..................................................................................................

Service braking system: .............................................................................................................

Secondary braking system: ....................................................................................................

Parking braking system: .........................................................................................................

Any additional braking system: ..........................................................................................

Break-away braking system: .....................................................................................................

Control and transmission of trailer braking systems in vehicles designed to tow a

trailer: ................................................................................................................................

Vehicle is equipped to tow a trailer with electric/pneumatic/hydraulic ( 1 ) service

brakes: yes/no ( 1 )

Anti-lock braking system: yes/no/optional ( 1 )

For vehicles with anti-lock systems, description of system operation (including any

electronic parts), electric block diagram, hydraulic or pneumatic circuit plan: ..............

Calculation and curves according to the Appendix to point 1.1.4.2 of the Appendix to

Annex II to Directive 71/320/EEC (or to the Appendix to Annex XI thereto, if

applicable): .....................................................................................................................................

Description and/or drawing of the energy supply (also to be specified for power-assisted

braking systems): .......................................................................................................................

In the case of compressed-air braking systems, working pressure p2 in the pressure

reservoir(s): ..........................................................................................................................

VER|JONI ELETTRONIKA

In the case of vacuum braking systems, the initial energy level in the reservoir(s): .......

Calculation of the braking system: Determination of the ratio between the total

braking forces at the circumference of the wheels and the force applied to the

braking control: ................................................................................................

Brief description of the braking systems (according to point 1.6 of the Addendum to

Appendix 1 of Annex IX to Directive 71/320/EEC): .........................................

If claiming exemptions from the Type I and/or Type II or Type III tests, state the

number of the report in accordance with Appendix 2 of Annex VII to Directive 71/320/EEC

Particulars of the type(s) of endurance braking system(s): .................................................

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Schedule Viii — EC Type-Approval of Motor Vehicles and their Trailers Open official source

" SCHEDULE XV

[Regulation 32(6)]

LIST OF THE REGULATORY ACTS FOR WHICH A MANUFACTURER

MAY BE DESIGNATED AS TECHNICAL SERVICE

Subject

Regulatory act reference

Directive or regulation Equivalent UNECE

Regulation ( + )

46. Tyres

Directive 92/23/EEC

30, 54, 117

61. Air-conditioning system

Directive 2006/40/EC

-

( + ) See Schedule IV Part II. ".

VER|JONI ELETTRONIKA

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 9 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

BODYWORK

Type of bodywork using the codes defined in Part C of Annex II: ....................................

Materials used and methods of construction: ....................................................................

Occupant doors, latches and hinges

Door configuration and number of doors: ......................................................................

Dimensions, direction and maximum angle of opening: ....................................................

Drawing of latches and hinges and of their position in the doors: .........................................................

Technical description of latches and hinges: .....................................................................

Details, including dimensions, of entrances, steps and necessary handles where

applicable: ............................................................................................................................

Field of vision

Particulars of the primary reference marks in sufficient detail to enable them to be

readily identified and the position of each in relation to the others and to the R-point

to be verified: .................................................................................................................

Drawing(s) or photograph(s) showing the location of component parts within the 180°

forward field of vision: ................................................................................................................................

Windscreen and other windows

Windscreen

Materials used: ...............................................................................................................................

Method of mounting: ..........................................................................................................

Angle of inclination: ...............................................................................................................

Type-approval number(s): ........................................................................................................

Windscreen accessories and the position in which they are fitted together with a

brief description of any electrical/electronic components involved: .....................................

Other windows

VER|JONI ELETTRONIKA

Materials used: ...............................................................................................................................

Type-approval number(s): ........................................................................................................

A brief description of the electrical/electronic components (if any) of the window

lifting mechanism: ...............................................................................................................

Opening roof glazing

Materials used: ...............................................................................................................................

Type-approval number(s): ........................................................................................................

Other glass panes

Materials used: ............................................................................................................................

Type-approval number(s): ........................................................................................................

Windscreen wiper(s)

Detailed technical description (including photographs or drawings): .............................

Windscreen washer

Detailed technical description (including photographs or drawings) or, if approved as

separate technical unit, type-approval number: .................................................................

Defrosting and demisting

Detailed technical description (including photographs or drawings): .............................

Maximum electrical consumption: .................................... kW

Devices for indirect vision

Rear-view mirrors, stating for each mirror

Make: .................................................................................................................................................................

Type-approval mark: ..............................................................................................................

Variant: ............................................................................................................................................

Drawing(s) for the identification of the mirror showing the position of the mirror

relative to the vehicle structure: ..........................................................................................

Details of the method of attachment including that part of the vehicle structure to

which it is attached: .............................................................................................................

Optional equipment which may affect the rearward field of vision: ................................

A brief description of the electronic components (if any) of the adjustment system

Devices for indirect vision other than mirrors: ..................................................................

Type and characteristics (such as a complete description of the device): ........................

VER|JONI ELETTRONIKA

In the case of a camera-monitor device, the detection distance (mm), contrast,

luminance range, glare correction, display performance (black and white/colour),

image repetition frequency, luminance reach of the monitor: ..........................................

Sufficiently detailed drawings to identify the complete device, including installation

instructions; the position for the EC type-approval mark has to be indicated on the

drawings.

Interior arrangement

Interior protection for occupants

Layout drawing or photographs showing the position of the attached sections or

views: ................................................................................................................................

Photograph or drawing showing the reference zone including the exempted area

referred to in point 2.3.1 of Annex I to Council Directive 74/60/EEC (OJ L 38,

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Schedule Ix — EC Type-Approval of Motor Vehicles and their Trailers Open official source

" SCHEDULE XXI

LIST OF SEPARATE DIRECTIVES/REGULATIONS AND THEIR AMENDMENTS

WHICH ARE ADOPTED

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

70/157/EEC

Council Directive of

L 42 p. 16

The effective date None

February 6 1970 on the

23.02.1970

approximation of the laws of

the Member States relating to

the permissible sound level

and the exhaust system of

motor vehicles.

73/350/EEC

L 321, p. 33 The effective date

None

22.11.1973

77/212/EEC

L 66; p. 33 The effective date

None

12.03.1977

81/334/EEC

L 131, p. 6 The effective date

None

18/05/1981

84/372/EEC

L 196, p. 47 The effective date

None

26.07.1984

84/424/EEC

L 238, p. 31 The effective date

None

06.09.1984

87/354/EEC

L 192; p. 43 The effective date

None

11.07.1987

89/491/EEC

L 238; p. 43 The effective date

None

15.08.1989

92/97/EEC

L 371; p. 1 The effective date

None

19.12.1992

96/20/EC

L 92; p. 23

The effective date

None

13.04.1996

1999/101/EC

L 334; p. 41 The effective date

None

28.12.1999

2006/96/EC

L. 363; p. 81 1st January 2007

None

20.12.2006

L. 155; p. 49 6 th July 2008

None

2007/34/EC

15.6.2007

70/220/EEC

Council Directive of March

L 76, p. 1

The effective date

None

20 1970 on the a pproxi-

06.04.1970

mation of the laws of the

Member States relating to

measures to be taken against

air pollution by gases from

positive-ignition engines of

motor vehicles

74/290/EEC

L 159; p. 61

The effective date

None

15.06.1974

77/102/EEC

L 32; p. 32

The effective date

None

03.02.1977

78/665/EEC

L 223; p. 48

The effective date

None

14.08.1978

83/351/EEC

L 197; p. 1

The effective date

None

20.07.1983

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

88/76/EEC

L 36; p. 1

The effective date None

09.02.1988

88/436/EEC

L 214; p. 1

The effective date

None

06.08.1988

89/458/EEC

L 226; p. 1 The effective date

None

03.08.1989

89/491/EEC

L 238; p. 43 The effective date

None

15.08.1989

91/441/EEC

L 242; p. 1 The effective date

None

30.08.1991

93/59/EEC

L 186; p. 21 The effective date

None

28.07.1993

94/12/EC

L 100; p. 42 The effective date

None

19.04.1994

96/44/EC

L 210; p. 25 The effective date

None

20.08.1996

96/69/EC

L 282; p. 64 The effective date

None

01.11.1996

98/77/EC

L 286; p. 34 The effective date

None

23.10.1998

98/69/EC

L 350; p. 1 The effective date

None

28.12.1998

1999/102/EC

L 334; p. 43 The effective date

None

28.12.1999

2001/1/EC

L 35; p. 34 The effective date

None

06.02.2001

2001/100/EC

L 16; p. 34 The effective date

None

18.01.2002

2002/80/EC

L 291; p. 20 The effective date

None

2003/76/EC

L 206; p. 29 4 September 2004

None

2006/96/EC

L. 363; p. 81 1st January 2007

None

20.12.2006

70/221/EEC

Council Directive of March

L 76, p. 23

The effective date

None

20, 1970 on the approxi-

06.04.1970

mation of the laws of the

Member States relating to

fuel tanks and rear underrun

projection of motor vehicles

and their trailers.

79/490/EEC

L 128; p. 22 The effective date

None

26.05.1979

81/333/EEC

L 131; p. 4 The effective date

None

18/05/1981

97/19/EC

L 125; p. 1 The effective date

None

16.05.1997

2000/8/EC

L 106; p. 7 The effective date

None

03.05.2000

2006/20/EC

L 48, p. 16

11 March 2007

None

18.2.2006

2006/96/EC

L. 363; p. 81 1st January 2007

None

20.12.2006

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

70/222/EEC

Council Directive of March

L 76; p. 25

20, 1970 on the approxi-

06.04.1970

mation of the laws of the

Member States relating to the

s pa c e f o r m ou n t i n g a n d

fixing of rear registration

plates on motor vehicles and

their trailers.

70/311/EEC

Council Directive of June 8,

L 133, p. 10 The effective date

None

1970 on the approximation of

18.06.1970

t he l a w s of t he M e m be r

States relating to the steering

equipment for motor vehicles

and their trailers.

92/62/EEC

L 199, p. 33 The effective date

None

18.07.1992

1999/7/EC

L 40, p. 36 The effective date

None

13.02.1999

70/387/EEC

Council Directive of July 27,

L 176, p. 5

The effective date

None

1970 on the approximation of

10.08.1970

t he l a w s of t he M e m be r

States relating to the doors of

motor vehicles and their

trailers.

82/890/EEC

L 378,

The effective date

None

31.12.1982

98/90/EEC

L 337; p. 29 The effective date

None

12.12.1998

2001/31/EC

L 130, p. 33 The effective date

None

12.05.2001

70/388/EEC

Council Directive of July 27,

L 176, p. 12

The effective date

None

1970 on the approximation of

10.08.1970

t he l a w s of t he M e m be r

States relating to audible

warning devices for motor

vehicles.

87/354/EEC

L 192, p. 43 The effective date

None

11.07.1987

2006/96/EC

L. 363; p. 81 1st January 2007

None

20.12.2006

71/127/EEC

Council Directive of March

L 68, p. 1

The effective date

Directive

1, 1971 on the approxima-

22.03.1971

71/127/EEC

tion of the laws of the

repealed from

Member States relating to the

24th January

rear-view mirrors of motor

vehicles.

79/795/EEC

L 239, p. 1 The effective date

None

22.09.1979

85/205/EEC

L 90, p. 1

The effective date

None

29.03.1985

86/562/EEC

L 327, p. 49 The effective date

None

22.11.1986

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

87/354/EEC

L 192, p. 43

The effective date None

11.07.1987

88/321/EEC

L 147, p. 77 The effective date None

14.06.1988

2003/97/EC

L 25, p. 1

W i t h r e s p e c t t o None

29.01.2004 these regulations -

1st January 2005 1

2005/27/EC

L 81,

The effective date None

30.3.2005

2006/96/EC

L. 363; p. 81 1st January 2007

None

20.12.2006

71/320/EEC

Council Directive of July 26,

L 202, p. 37 The effective date

None

1971 on the approximation of

06.09.1971

t he la w s o f t he Me m be r

States relating to the braking

devices of certain categories

of motor vehicles and their

trailers.

74/132/EEC

L 74, p. 7

The effective date

None

19.03.1974

75/524/EEC

L 236, p. 3

The effective date

None

08.09.1975

79/489/EEC

L 128, p. 12

The effective date

None

26.05.1979

85/647/EEC

L 380, p. 1

The effective date

None

31.12.1985

88/194/EEC

L 92, p. 47

The effective date

None

09.04.1988

91/422/EEC

L 233, p. 21

The effective date

None

22.08.1991

98/12/EC

L 81, p. 1

The effective date

None

18.03.1998

2002/78/EC

L 267, p. 23

The effective date

None

04.10.2002

2006/96/EC

L. 363;

1st January 2007

None

20.12.2006

72/245/EEC

Council Directive of June 20,

L 152, p. 15 The effective date

None

1972 relating to the radio

06.07.1972

interference (electro-

magnetic compatibility) of

vehicles.

89/491/EEC

L 238, p. 43

The effective date

None

15.08.1989

95/54/EC

L 266, p. 1

The effective date

None

08.11.1995

2004/104/EC

L 337, p. 13

1 January 2006

None

13.11.2004

2005/49/EC

L 194, p. 12

1 January 2006

None

26.7.2005

2005/83/EC

L 305, p. 32

1 October 2006

None

24.11.2005

2006/28/EC

L 65, p. 27

1 July 2006

None

7.3.2006

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

2006/96/EC

L. 363; p. 81 1st January 2007

None

20.12.2006

2009/19/EC

L. 70; p. 17 1st October 2009

14.03.2009 Provisions shall

apply from 2nd

October 2009

72/306/EEC

Council Directive of August

L 190, p. 1

The effective date

None

2, 1972 on the approxima-

20.08.1972

tion of the laws of the

Member States relating to

measures to be taken against

the emission of pollutants

from diesel engines for use in

vehicles

89/491/EEC

L 238, p. 43 The effective date

None

15.08.1989

97/20/EC

L 125, p. 21 The effective date

None

16.05.97

2005/21/EC

L 61, p. 25

9th March 2006

None

8.3.2005

74/60/EEC

Council Directive of

L 38, p. 2

The effective date

None

December 17, 1973 on the

11.02.1974

approximation of the laws of

the Member States relating to

the interior fittings of motor

vehicles

78/632/EEC

L 206, p. 26

The effective date

None

29.07.1978

2000/4/EC

L 87, p. 22

The effective date

None

08.04.2000

74/61/EEC

Council Directive of

L 38, p. 22

The effective date

None

December 17, 1973 on the

11.02.1974

approximation of the laws of

the Member States relating to

devices to prevent the

unauthorized use of motor

vehicles.

95/56/EEC

L 286, p 1

The effective date

None

29.11.1995

2006/96/EC

L. 363, p. 81 1st January 2007

None

20.12.2006

74/297/EEC

Council Directive of June 4,

L 165, p. 16

The effective date

None

1974 on the approximation of

20.06.1974

t he l a w s of t he M e m be r

States relating to the interior

fittings of motor vehicles (the

behaviour of the steering

mechanism in the event of an

impact)

91/662/EEC

L 366, p. 1

The effective date

None

31.12.1991

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

74/408/EEC

Council Directive of July 22,

L 221, p. 1

The effective date None

1974 relating to motor

12.08.1974

vehicles with regard to the

seats, their anchorages and

head restraint.

81/577/EEC

L 209, p. 34 The effective date

None

29.07.1981

96/37/EC

L 186, p. 28 The effective date

None

25.07.1996

2005/39/EC

L 255, p. 143 21 April 2006

None

30.9.2005

2006/96/EC

L. 363, p. 81 1st January 2007

None

20.12.2006

74/483/EEC

Council Directive of

L 266, p. 4

The effective date

None

September 17, 1974 on the

02.10.1974

approximation of the laws of

the Member States relating to

the external projections of

motor vehicles.

79/488/EEC

L 128, p. 1

The effective date

None

26.05.1979

87/354/EEC

L 192, p. 43

The effective date

None

11.07.1987

2006/96/EC

L 363, p. 81

1st January 2007

None

20.12.2006

2007/15/EC

L 75, p. 21

5th April 2009

None

15.3.2007

75/443/EEC

Council Directive of June 26,

L 196, p. 1

The effective date

None

1975 on the approximation of

26.07.1975

t he la w s o f t he Me m be r

States relating to the reverse

and speedometer equipment

of motor vehicles.

97/39/EC

L 177, p. 15

The effective date

None

05.07.1997

76/114/EEC

Council Directive of

L 24, p. 1

The effective date

None

December 18, 1976 on the

30.01.1976

approximation of the laws of

the Member States relating to

statutory plates and

inscriptions for motor

vehicles and their trailers,

and their location and

method of attachment.

78/507/EEC

L 155, p. 31 The effective date

None

13.06.1978

87/354/EEC

L 192, p. 43 The effective date

None

11.07.1987

2006/96/EC

L. 363, p. 81 1st January 2007

None

20.12.2006

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

76/115/EEC

Council Directive of

L 24, p. 6

The effective date None

December 18, 1975 on the

30.01.1976

approximation of the law of

the Member States relating to

anchorages for motor vehicle

safety belts.

81/575/EEC

L 209, p. 30 The effective date

None

29.07.1981

82/318/EEC

L 139, p. 9

The effective date

None

19.05.1982

90/629/EEC

L 341, p. 14 The effective date

None

06.12.1990

96/38/EC

L 187, p. 95 The effective date

None

26.07.1996

2005/41/EC

L 255, p. 149 21 April 2006

None

30.9.2005

76/756/EEC

Council Directive of July 27,

L 262, p. 1

The effective date

None

1976 on the approximation of

27.09.1976

the laws of Member States

relating to the installation of

lighting and light signaling

devices on motor vehicles

and their trailers

80/233/EEC

L 51, p. 8

The effective date

None

25.02.1980

82/244/EEC

L 109, p. 31

The effective date

None

22.04.1982

83/276/EEC

L 151, p. 47

The effective date

None

09.06.1983

84/8/EEC

L 9, p. 24

The effective date

None

12.01.1984

89/278/EEC

L 109, p. 38

The effective date

None

20.04.1989

91/663/EEC

L 366, p. 17

The effective date

None

31.12.1991

97/28/EC

L 171, p. 1

The effective date

None

30.06.1997

10 th July 2008

2007/35/EC

L 157, p. 14

None

19.6.2007

16 th October 2009

2008/89/EC

L 257, p. 14

None

25.9.2008

76/757/EEC

Council Directive of July 27,

L 262, p. 32

The effective date

None

1976 on the approximation of

27.09.1976

the laws of Member States

relating to retro-reflectors for

motor vehicles and their

trailers.

87/354/EEC

L 192, p. 43 The effective date

None

11.07.1987

97/29/EC

L 171, p. 11 The effective date

None

30.06.1997

2006/96/EC

L. 363; p. 81 1st January 2007

None

20.12.2006

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

76/758/EEC

Council Directive of July 27,

L 262, p. 54 The effective date None

1976 on the approximation of

27.09.1976

t he la w s o f t he Me m be r

States relating to the end-

outline marker lamps, front

position (side) lamps, rear

position (side) lamps, stop

lamps, da ytime, running

lamps and side marker lamps

for motor vehicles and their

trailers.

87/354/EEC

L 192, p. 43

The effective date None

11.07.1987

89/516/EEC

L 265, p. 1

The effective date None

12.09.1989

97/30/EC

L 171, p. 25

The effective date None

30.06.1997

2006/96/EC

L. 363, p. 81

1st January 2007

None

20.12.2006

76/759/EEC

Council Directive of July 27,

L 262, p. 71

The effective date None

1976 on the approximation of

27.09.1976

t he la w s o f t he Me m be r

States relating to direction

indicator lamps for motor

vehicles and their trailers

87/354/EEC

L 192, p. 43

The effective date None

11.07.1987

89/277/EEC

L 109, p. 25

The effective date None

20.04.1989

1999/15/EC

L 97, p. 14

The effective date None

12.04.1999

2006/96/EC

L. 363, p. 81

1st January 2007

None

20.12.2006

76/760/EEC

Council Directive of July 27,

L 262, p. 85 The effective date None

1976 on the approximation of

27.09.1976

the laws of Member States

relating to the registration

plate lamps for motor

vehicles and their trailers.

87/354/EEC

L 192, p. 43 The effective date None

11.07.1987

97/31/EC

L 171, p. 49 The effective date None

30.06.1997

2006/96/EC

L 363, p. 81 1st January 2007

None

20.12.2006

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

76/761/EEC

Council Directive of July 27,

L 262, p. 96 The effective date None

1976 on the approximation of

27.09.1976

t he l a w s of t he M e m be r

S ta t e s r e la t i ng t o m o tor

vehicle he ad lamps with

function as main beam and/or

dipped beam headlamps and

to light sources (filament

lamps and others) for use in

approval lamp units of motor

vehicles and of their trailers

87/354/EEC

L 192, p. 43

The effective date

None

11.07.1987

89/517/EEC

L 265, p. 15

The effective date

None

12.09.1989

1999/17/EC

L 97, p. 45

The effective date

None

12.04.1999

2006/96/EC

L. 363, p. 81

1st January 2007

None

20.12.2006

76/762/EEC

Council Directive of July 27,

L 262, p. 122 The effective date

None

1976 on the approximation of

27.09.1976

t he l a w s of t he M e m be r

States relating to front fog

lamps for motor vehicles.

87/354/EEC

L 192, p. 43

The effective date

None

11.07.1987

1999/18/EC

L 97, p. 82

The effective date

None

12.04.1999

2006/96/EC

L 363, p. 81

1st January 2007

None

20.12.2006

77/389/EEC

Council Directive of May 17,

L 145, p. 41

The effective date

None

1977 on the approximation of

13.06.1977

t he l a w s of t he M e m be r

S ta t e s r e la t i ng t o m o tor

vehicle towing-devices.

96/64/EC

L 258, p. 26

The effective date

None

11.10.1996

77/538/EEC

Council Directive of June 28,

L 220, p. 66

The effective date

None

1977 on the approximation of

29.08.1977

t he l a w s of t he M e m be r

States relating to rear fog

lamps for motor vehicles and

their trailers.

87/354/EEC

L 192, p. 43

The effective date

None

11.07.1987

89/518/EEC

L 265, p. 24

The effective date

None

12.09.1989

1999/14/EC

L 97, p. 1

The effective date

None

12.04.1999

2006/96/EC

L. 363, p. 81

1st January 2007

None

20.12.2006

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

77/539/EEC

Council Directive of June 28,

L 220, p. 60

The effective date None

1977 on the approximation of

29.08.1977

the laws of reversing lamps

for motor vehicles and their

trailers.

87/354/EEC

L 192, p. 43

The effective date

None

11.07.1987

97/32/EC

L 171;

The effective date

None

30.06.1997

2006/96/EC

L 363, p. 81

1st January 2007

None

20.12.2006

77/540/EEC

Council Directive of June 28,

L 220, p. 83

The effective date

None

1977 on the approximation of

29.08.1977

t he la w s o f t he Me m be r

States relating to parking

lamps for motor vehicles.

87/354/EEC

L 192, p. 43

The effective date

None

11.07.1987

1999/16/EC

L 97, p. 33

The effective date

None

12.04.1999

2006/96/EC

L 363, p. 81

1st January 2007

None

20.12.2006

77/541/EEC

Council Directive of June 28,

L 220, p. 95

The effective date

None

1977 on the approximation of

29.08.1977

t he la w s o f t he Me m be r

States relating to safety belts

a nd r es tra int s yste m s of

motor vehicles.

81/576/EEC

L 209, p. 32 The effective date

None

29.07.1981

82/319/EEC

L 139, p. 17 The effective date

None

19.05.1982

87/354/EEC

L 192, p. 43 The effective date

None

11.07.1987

90/628/EEC

L 341, p. 1

The effective date

None

06.12.1990

96/36/EC

L 178, p. 15 The effective date

None

17.07.1996

2000/3/EC

L 53, p. 1

The effective date

None

25.02.2000

2005/40/EC

L 255, p. 146 21 April 2006

None

30.9.2005

2006/96/EC

L. 363, p. 81 1st January 2007

None

20.12.2006

77/649/EEC

Council Directive of

L. 267, p. 1

The effective date

None

September 27, 1977 on the

19.10.1977

approximation of laws of the

Member States relating to the

f ie l d o f vis i on of m ot or

vehicle drivers.

81/643/EEC

L 231, p. 41

The effective date

None

15.08.1981

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

88/366/EEC

L 181, p. 40

The effective date None

12.07.1988

90/630/EEC

L 341, p. 20

The effective date

None

06.12.1990

78/316/EEC

Council Directive of

L 81, p. 3

The effective date

None

December 21, 1977 on the

28.03.1978

approximation of the laws of

the Member States relating to

the interior fittings of motor

vehicles (identification of

controls, tell-tales and

indicators)

93/91/EEC

L 284, p. 25

The effective date

None

19.11.1993

94/53/EC

L 299, p. 26

The effective date

None

22.11.1994

78/317/EEC

Council Directive of

L 81, p. 27

The effective date

None

December 21, 1977 on the

28.03.1978

approximation of the laws of

the Member States relating to

the defrosting and demisting

systems of glazed surfaces of

motor vehicles

78/318/EEC

Council Directive of

L 81, p. 49

The effective date

None

December 21, 1977 on the

28.03.1978

approximation of the laws of

the member states relating to

the wiper and wash systems

of motor vehicles.

94/68/EC

L 354, p. 1

The effective date

None

31.12.1994

2006/96/EC

L. 363, p. 33 1st January 2007

None

20.12.2006

78/549/EEC

Council Directive of June 12,

L 168, p. 45

The effective date

None

1978 on the approximation of

26.06.1978

the laws of the member states

relating to the wheel guards

of motor vehicles.

94/78/EC

L 354, p. 10

The effective date

None

13.12.1994

78/932/EEC

Council Directive of October

L 325, p. 1

The effective date

None

16,

on

the

20.11.1978

approximation of the laws of

the Member States relating to

head restraints of seats of

motor vehicles.

87/354/EEC

L 192, p. 43 The effective date

None

11.07.1987

2006/96/EC

L. 363, p. 81 1st January 2007

None

20.12.2006

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

80/1268/EEC C o u n c i l D i r e c t i v e o f

L 375, p. 36

The effective date None

December 16, 1980 relating

31.12.1980

to carbon dioxide emissions

and the fuel consumption of

motor vehicles.

89/491/EEC

L 238, p. 43

The effective date

None

15.08.1989

93/116/EC

L 329, p. 39

The effective date

None

30.12.1993

1999/100/EC

L 334, p. 36

The effective date

None

28.12.1999

2004/3/EC

L 49, p. 36

19 February 2005

None

19.02.2004

80/1269/EEC C o u n c i l D i r e c t i v e o f

L 375, p. 46

The effective date

Regulation

December 16, 1980 on the

31.12.1980

595/2009 will

approximation of the laws of

repeal

Member States relating to the

Directive 80/

engine power of motor

126/EEC with

vehicles.

effect from 31

December

88/195/EEC

L 92, p. 50

The effective date

None

09.04.1988

89/491/EEC

L 238, p. 43

The effective date

None

15.08.1989

97/21/EC

L 125, p. 31

The effective date

None

16.05.1997

1999/99/EC

L 334, p. 32

The effective date

None

28.12.1999

88/77/EEC

Council Directive of

L 36, p. 33

The effective date. None

December 3, 1987 on the

09.02.1988

Repealed as from 9

approximation of the laws of

November 2006

Member States relating to the

measures to be taken against

the emission of gaseous and

particulate pollution from

compression ignition engines

for use in vehicles, and the

emission of gaseous

pollutants from positive

ignition engines fuelled with

na t ur a l g a s o r l i qu e f i e d

petroleum gas for use in

vehicles.

91/524/EEC

L 295, p. 1

The effective date.

None

25.10.2000

Repealed as from 9

November 2006

1999/96/EC

L 44, p. 1

The effective date. None

16.02.2000

Repealed as from 9

November 2006

2001/27/EC

L 107, p. 10

The effective date. None

18.04.2001

Repealed as from 9

November 2006

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

2005/55/EC

Directive 2005/55/EC of the

L 275, p. 1

9 November 2006 R e g u l a t i o n

European Parliament and of

20.10.2005

595/2009 will

the Council of 28 September

repeal

2005 on the approximation of

Directives

t he l a w s of t he M e m be r

20 05/ 5 5/ EC

States relating to the

and 2005/78/

measures to be taken against

EC with effect

the emission of gaseous &

from

particulate pollutants from

December

compression-ignition engines

for use in vehicles, and the

emission of gaseous

pollutants from positive-

ignition engines fuelled with

n a t u r a l ga s or l i q ue f i e d

petroleum gas for use in

vehicles

2005/78/EC

L 313, p. 1

9 November 2006

Regulation

29.11.2005

595/2009 will

repeal

Directives

20 05/ 5 5/ EC

and 2005/78/

EC with effect

from

December

2006/51/EC

L 152, p. 11

9 November 2006

None

07.06.2006

2008/74/EC

L 192, p. 51

3 January 2009

None

19.7.2008

89/297/EEC

Council Directive 89/297/

L 124, p. 1

The effective date

None

EEC of April 13, 1989 on the

05.05.1989

approximation of the laws of

the Member States relating to

the lateral protection (side

guards) of certain motor

vehicles and their trailers

91/226/EEC

Council Directive of March

L 103, p. 5

The effective date

None

27, 1991 on the approxi-

23.04.1991

mation of the laws of the

Member States relating to the

spray-suppression systems of

certain categories of motor

vehicles and their trailers

2006/96/EC

L. 363, p. 81 1st January 2007

None

20.12.2006

92/21/EEC

Council Directive of March

L 129, p. 1

The effective date

None

31, 1992 on the masses and

14.05.1992

dimensions of motor vehicles

of category M 1

95/48/EC

L 233, p. 73

The effective date

None

30.09.1995

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

92/22/EEC

Council Directive of March

L 129, p. 11

The effective date None

31, 1992 on safety glazing

14.05.1992

and glazing materials on

motor vehicles and their

trailers.

2001/92/EC

L 291, p. 24

The effective date

None

08.11.2001

92/23/EEC

Council Directive of March

L 129, p. 95

The effective date

None

31, 1992 relating to tyres for

14.05.1992

motor vehicles and their

trailers and to their fitting

2001/43/EC

L 211, p. 25 The effective date

None

04.08.2001

2005/11/EC

L 46, p. 42

1st January 2006

None

17.02.2005

92/24/EEC

Council Directive of March

L 129, p. 154 The effective date

None

31, 1992 relating to speed

14/05/1992

limitation devices or similar

speed limitation on-board

systems of certain categories

of motor vehicles

2004/11/EC

L 44, p. 19

1 8 t h N o v e m b e r None

14.02.2004

92/114/EEC

Council Directive of

L 409, p. 17

The effective date

None

December 17, 1992 relating

31.12.1992

to the external projections

forward of the cab's rear

panel of motor vehicles of

category N

94/20/EC

Directive of the European

L 195, p. 1

The effective date

None

Parliament and of the

20.07.1994

Council of May 30, 1994

relating to the mechanical

coupling devices of motor

vehicles and their trailers and

their attachment to those

vehicles

2006/96/EC

L 363, p. 81

1st January 2007

None

20.12.2006

95/28/EC

Directive of the European

L 281, p. 1

The effective date

None

Parliament and of the

23.11.1995

Council of October 24, 1995

relating to the burning

behaviour of materials used

in the interior construction of

certain categories of motor

vehicle.

2006/96/EC

L 363, p. 81

1st January 2007

None

20.12.2006

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

96/27/EC

Directive of the European

L 169, p. 1

The effective date None

Parliament and of the

08.07.1996

Council of May 20, 1996 on

the protection of occupants

of motor vehicles in the event

of a side impact and

amending Directive 70/156/

EEC

96/79/EC

Directive of the European

Parliament and of the

Council of December 16,

1996 on the protection of

occupants of motor vehicles

in the e ve nt of a fronta l

impact and amending

Directive 70/156/EEC.

1999/98/EC

L 009, p. 14

The effective date

None

13/01/2000

97/27/EC

Directive of the European

L 233, p. 1

The effective date

None

Parliament and of the

25.08.1997

Counc il of 22 July 1997

relating to the masses and

dimensions of certain

categories of motor vehicles

and their trailers and

amending Directive 70/156/

EEC.

2002/85/EC

L 42, p. 1

The effective date

None

13.02.2002

2003/19/EC

L 79, p. 6

The effective date

None

26.03.2003

98/91/EC

Directive of the European

L 011, p. 25 The effective date

None

Parliament and of the

16.01.1999

Council of December 14,

1998 relating to motor

vehicles and their trailers

intended for the transport of

dangerous goods by road and

amending Directive 70/156/

EEC relating to the type-

approval of motor vehicles

and their trailers.

2000/40/EC

Directive of the European

L 203, p. 9

The effective date

None

Parliament and of the

10.08.2000

Council of June 26, 2000 on

the approximation of the

laws of the Member States

relating to the front underrun

protection of motor vehicles

and amending Council

Directive 70/156/EEC

2006/96/EC

L. 363, p. 33 1st January 2007

None

20.12.2006

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

2001/56/EC

Directive 2001/56/EC of the

L 292, p. 21

The effective date None

European Parliament and of

09.11.2001

the Council of September 27,

2001 r ela ting to hea ting

systems for motor vehicles

and their trailers, amending

Council Directive 70/156/

EEC and repealing Council

Directive 78/548/EEC.

2004/78/EC

L 153, p. 100 The effective date None

30/04/2004

2006/119/EC

L 330, p. 12 30 September 2007 None

28.11.2006

2006/96/EC

L 363, p. 81 1st January 2007

None

20.12.2006

2001/85/EC

Directive 2001/85/EC of the

L 42, p. 1

The effective date

None

European Parliament and of

13/02/2002

the Council of November, 20

200 1 r e la t i ng t o s p e c ia l

provisions for vehicles used

for the carriage of passengers

comprising more than eight

seats in addition to the

driver’s seat, and amending

Directives 70/156/EEC and

97/27/EC

2006/96/EC

L. 363, p. 81 1st January 2007

None

20.12.2006

2003/102/EC

Directive 2003/102/EC of the

L 321, p. 15

The effective date

Regulation

European Parliament and of

06.02.2003

78/2009 will

the Council of November, 17

repeal

2003 relating to the

Directives

protection of pedestrians and

2003/102/EC

other vulnerable road users

and 2005/66/

before and in the event of a

EC with effect

collision with a motor

from

vehicle and amending

November

Council Directive 70/156/

EEC

C om m i s s io n L 31, p. 21

The effective date

Not

Decision

04.02.2004

applicable

2004/90/EC

2005/64/EC

Directive 2005/64/EC of the

L 310, p. 10

1 5 t h D e c e m b e r None

European Parliament and of

25.11.2005

the Council of 26 October

2005 on the type-approval of

motor vehicles with regard to

their reusability, recyclability

and recoverability and

amending Council Directive

70/156/EEC

Directive No. L 9, p. 31

3rd February 2009

2009/1/EC

14.1.2009

The provisions shall

apply from 4

February 2010

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

2005/66/EC

Directive 2005/66/EC of the

L 309, p. 37 25th August 2006 R e g u l a t i o n

European Parliament and of

25.11.2005

78/2009 will

the Council of 26 October

repeal

2005 relating to the use of

Directives

frontal protection systems on

2003/102/EC

motor vehicles and amending

and 2005/66/

Council Directive 70/156/

EC with effect

EEC

from

November

2006/368/EC

L 140, p. 33 2 6 t h N o v e m b e r None

29.05.2006 2006

2006/96/EC

L. 363, p. 81 1st January 2007

None

20.12.2006

R e g u l a t i o n Regulation (EC) No 715/

L 171, p. 1

Articles 10(1), and None

(EC) No. 715/ 2 0 0 7 o f t h e E u r o p e a n

22.6.2007

12 from 2 July 2007

Parliament and of the

Council of 20 June 2007 on

type-approval of motor

ve hi cl e s wi th r e spe c t to

emissions from light

passenger and commercial

vehicles (Euro 5 and Euro 6)

and on access to vehicle

repair and maintenance

information

Com m is si on L 191, p. 1

31st July 2008.

R e g u l a t i o n 28.7.2008

However,

the

No. 692/2008

obligations set out

in A rt ic l e s 4( 5) ,

4(6), 5(3)(d) and

5(3)(e) shall apply

from 1 September

2011 for the type

a p pr o va l o f ne w

types of vehicles

and from 1 January

2014 for all ne w

vehicles sold,

re gistered or put

into service in the

Community.

Com m is si on L 188, p. 1

7th August 2009

Directives 80/

R e g u l a t i o n 18.7.2009

It shall apply from 1 2 6 9 / E E C ,

No. 595/2009

7 A u g u s t 2 0 0 9 . 20 05/ 5 5/ EC

However, Articles and 2005/78/

8(3) and 10 shall E C

are

a p p l y f r o m 7 repealed with

August 2009 and effect from 31

points 1(a)(i), December

1(b)(i), 2(a), 3(a)(i), 2013.

3(b)(i), 3(c)(i),

3(d)(i) and 3(e)(i)

of Annex II shall

apply from 31

December 2013.

VER|JONI ELETTRONIKA

Base Directive

Title of Base Directive

Amending

Official

National

Date of Adoption

no.

Directive No.

Journal

Requirements

(Where the

reference/

relevant to the

effective date

page

particular

shall mean 1st

Directive

May 2004)

2006/40/EC

Relating to emissions from

L 161, p. 12

5 January 2008

None

air-conditioning systems in

14.06.2006

motor vehicles and amending

Council Directive 70/156/

EEC

C om m i s s io n L 161, p. 33

5 January 2008

None

R e g u l a t i o n 22.06.2007

No. 706/2007

2007/37/EC

L 161, p. 60

5 January 2008

None

22.06.2007

Directive 71/127/EEC shall be repealed with effect from 24th January 2010. ".

1. VER|JONI ELETTRONIKA

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Schedule X — EC Type-Approval of Motor Vehicles and their Trailers Open official source

" SCHEDULE XXII

LIST OF DIRECTIVES AND REGULATIONS AMENDING

DIRECTIVE 2007/46/EC WHICH ARE IN FORCE.

Base Directive No or

Title of Base Directive/Regulation

Official Journal

reference/page

Reg No. 1060/2008 COMMISSION REGULATION (EC) No 1060/2008 of 7 October L 292, p. 1

2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 31.10.2008

2007/46/EC of the European Parliament and of the Council

establishing a framework for the approval of motor vehicles and

their trailers, and of systems, components and separate technical

units intended for such vehicles (Framework Directive)

COMMISSION REGULATION (EC) No 78/2009 of the European L 35, p. 1

Parliament and of the Council of 14 January 2009 on the type- 4.02.2009

approval of motor vehicles with regard to the protection of

pedestrians and other vulnerable road users, amending Directive

2007/46/EC and repealing Directives 2003/102/EC and 2005/66/EC

COMMISSION REGULATION (EC) No 79/2009 of the European L 35, p. 32

Parliament and of the Council of 14 January 2009 on type-approval 4.02.2009

of hydrogen-powered motor vehicles, and amending Directive

2007/46/EC

COMMISSION REGULATION (EC) No 385/2009 of 7 May 2009 L 118, p. 13

replacing Annex IX to Directive 2007/46/EC of the European 13.05.2009

Parliament and of the Council establishing a framework for the

approval of motor vehicles and their trailers, and of systems,

components and separate technical units intended for such vehicles

(Framework Directive)

REGULATION (EC) No 595/2009 of the European Parliament and L 188, p. 1

of the Council of 18th June 2009 on type-approval of motor 18.07.2009

vehicles and engines with respect to emissions from heavy duty

vehicles (Euro VI) and on access to vehicle repair and maintenance

information and amending Regulation (EC) No 715/2007 and

Directive 2007/46/EC and repealing Directives 80/1269/EEC, 2005/

55/EC and 2005/78/EC

COMMISSION REGULATION (EC) No 631/2009 of 22 July 2009 L 195, p. 1

laying down detailed rules for the implementation of Annex I to 25.07.2009

Regulation (EC) 78/2009 of the European Parliament and of the

Council on the type-approval of motor vehicles with regard to the

protection of pedestrians and other vulnerable road users, amending

Directive 2007/46/EC and repealing Directives 2003/102/EC and

2005/66/EC

Mitbug] fl-Istamperija tal-Gvern fuq karta ri`iklata - Printed at the Government Printing Press on recycled paper

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 11 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

2.1974, p. 2): ...................................................................................................................

Photographs, drawings and/or an exploded view of the interior fittings, showing the

parts in the passenger compartment and the materials used (with the exception of

interior rear view mirrors), arrangement of controls, roof and opening roof, backrest,

seats and the rear part of seats

Arrangement and identification of controls, tell-tales and indicators

Photographs and/or drawings of the arrangement of symbols and controls, tell-tales

and indicators: ......................................................................................................................

Photographs and/or drawings of the identification of controls, tell-tales and indicators

and of the vehicle parts mentioned in Annex II and III of Directive 78/316/EEC where

relevant: ................................................................................................................................

Summary table

The vehicle is equipped with the following controls, indicators and tell-tales

pursuant to Annexes II and III to Directive 78/316/EEC

Controls, tell-tales and indicators for which, when fitted, identification is mandatory,

and symbols to be used for that purpose

Control/

Identified

Tell-tale

Identified

indicator

Where

Symbol

by symbol

available

by symbol

Device

( ** )

available

No

( * )

Master light

Dipped-beam headlamps

Main-beam head lamps

Position (side) lamps

Front fog lamps

Rear fog lamp

Headlamp levelling

device

Parking lamps

Direction indicators

Hazard warning

VER|JONI ELETTRONIKA

Control/

Identified

Tell-tale

Identified

indicator

Where

Symbol

by symbol

available

by symbol

Device

( ** )

available

No

( * )

Windscreen wiper

Windscreen washer

Windscreen wiper and

washer

Headlamp cleaning

device

Windscreen demisting

and defrosting

Rear window demisting

and defrosting

Ventilating fan

Diesel pre-heat

Choke

Brake failure

Fuel level

Battery charging

condition

Engine coolant

temperature

(*)

x = yes

- = no or not separately available

o = optional.

(**)

d = directly on control, indicator or tell-tale

c = in close vicinity.

Controls, tell-tales and indicators for which, when fitted, identification is optional,

and symbols which must be used if they are to be identified

Control/

Identified

Tell-tale

Identified

indicator

Where

Symbol

by symbol

available

by symbol

Device

( ** )

available

No

( * )

Parking brake

Rear window wiper

Rear window washer

Rear window wiper and

washer

Intermittent windscreen

wiper

Audible warning device

(horn)

Front hood (bonnet)

Rear hood (boot)

Seat belt

Engine oil pressure

Unleaded petrol

…

(*)

x = yes

- = no or not separately available

o = optional.

(**)

d = directly on control, indicator or tell-tale

VER|JONI ELETTRONIKA

c = in close vicinity.

Seats

Number of seating positions ( s ): ...............................................................................................

Location and arrangement: .................................................................................................

Seat(s) designated for use only when the vehicle is stationary: .......................................

Mass: .......................................................................................................................................................................

Characteristics: for seats not type-approved as components, description and drawings of

The seats and their anchorages: ........................................................................................

The adjustment system: ......................................................................................................

The displacement and locking systems: ............................................................................

The seat belt anchorages (if incorporated in the seat structure): ....................................

the parts of the vehicle used as anchorages: ....................................................................

Coordinates or drawing of the R-point ( t )

Driver’s seat: .......................................................................................................................................

All other seating positions: ..............................................................................................

Design torso angle

Driver’s seat: .......................................................................................................................................

All other seating positions: .................................................................................................

Range of seat adjustment

Driver’s seat: .......................................................................................................................................

All other seating positions: .................................................................................................

Head restraints

Type(s) of head restraints: integrated/detachable/separate ( 1 )

Type-approval number(s), if available: ....................................................................................

For head restraints not yet approved

A detailed description of the head restraint, specifying in particular the nature of the

padding material or materials and, where applicable, the position and specifications

of the braces and anchorage pieces for the type of seat for which approval is sought

In the case of a ‘separate’ head restraint

A detailed description of the structural zone to which the head restraint is intended to

be fixed: ............................................................................................................................

VER|JONI ELETTRONIKA

Dimensional drawings of the characteristic parts of the structure and the head

restraint: ............................................................................................................................

Heating systems for the passenger compartment

A brief description of the vehicle type with regard to the heating system if the heating

system uses the heat of the engine cooling fluid: ..............................................................

A detailed description of the vehicle type with regard to the heating if the cooling air or

the exhaust gases of the engine are used as heat source, including

Layout drawing of the heating system showing its position in the vehicle: ..................

Layout drawing of the heat exchanger for heating systems using the exhaust gases for

heating, or of the parts where the heat exchange takes place (for heating systems using

the engine cooling air for heating): ........................................................................................

Sectional drawing of the heat exchanger or the parts respectively where the heat

exchange takes place indicating the thickness of the wall, used materials and

characteristics of the surface: ..............................................................................................

Specifications shall be given for further important components of the heating

system such as, for example, the heater fan, with regard to their method of

construction and technical data: ......................................................................................

A brief description of the vehicle type with regard to the combustion heating system

and the automatic control: ...................................................................................................

Layout drawing of the combustion heater, the air inlet system, the exhaust system, the

fuel tank, the fuel supply system (including the valves) and the electrical connections

showing their positions in the vehicle: .....................................................................................

Maximum electrical consumption: .............................. kW

Components influencing the behaviour of the steering mechanism in the event of an

impact

A detailed description, including photograph(s) and/or drawing(s), of the vehicle type

with respect to the structure, the dimensions, the lines and the constituent materials of

that part of the vehicle forward of the steering control, including those components

designed to contribute to the absorption of energy in the event of an impact against the

steering control: ...................................................................................................................

Photograph(s) and/or drawing(s) of vehicle components other than those described in

9.10.6.1 as identified by the manufacturer in agreement with the technical service, as

contributing to the behaviour of the steering mechanism in case of impact: ...................

Burning behaviour of materials used in the interior construction of certain categories of

motor vehicles

Material(s) used for the interior lining of the roof

Component type-approval number(s), if available: .............................................................

For materials not approved

Base material(s)/designation: ........................... /............................

VER|JONI ELETTRONIKA

Composite/single ( 1 ) material, number of layers ( 1 ): ...........................................................

Type of coating ( 1 ): ....................................................................................................................

Maximum/minimum thickness: ........................... /................................ mm

Material(s) used for the rear and side walls

Component type-approval number(s), if available: .............................................................

For materials not approved

Base material(s)/designation: .................................. /............................

Composite/single ( 1 ) material, number of layers ( 1 ): ...........................................................

Type of coating ( 1 ): ....................................................................................................................

Maximum/minimum thickness: ........................./............................. mm

Material(s) used for the floor

Component type-approval number(s), if available:. ............................................................

For materials not approved

Base material(s)/designation: ................................/...............................

Composite/single ( 1 ) material, number of layers ( 1 ): ...........................................................

Type of coating ( 1 ): ....................................................................................................................

Maximum/minimum thickness: ............................./............................. mm

Material(s) used for the upholstery of the seats

Component type-approval number(s), if available: .............................................................

Floor materials not approved

Base material(s)/designation: .................................../.......................................

Composite/single ( 1 ) material, number of layers ( 1 ): ...........................................................

Type of coating ( 1 ): ....................................................................................................................

Maximum/minimum thickness: ............................./...................... mm

Material(s) used for the heating and ventilation pipes

Component type-approval number(s), if available: .............................................................

For materials not approved

Base material(s)/designation: ................................/......................................

Composite/single ( 1 ) material, number of layers ( 1 ): ...........................................................

Type of coating ( 1 ): ....................................................................................................................

VER|JONI ELETTRONIKA

Maximum/minimum thickness: ........................../.................................. mm

Material(s) used for luggage racks

Component type-approval number(s), if available: .............................................................

For materials not approved

Base material(s)/designation: ................................../..................................

Composite/single ( 1 ) material, number of layers ( 1 ): ...........................................................

Type of coating ( 1 ): ....................................................................................................................

Maximum/minimum thickness: ................................../.................................... mm

Material(s) used for other purposes

Intended purposes: ..............................................................................................................

Component type-approval number(s), if available: .............................................................

For materials not approved

Base material(s)/designation: .............................../....................................

Composite/single ( 1 ) material, number of layers ( 1 ): ...........................................................

Type of coating ( 1 ): ....................................................................................................................

Maximum/minimum thickness: ................................../................................ mm

Components approved as complete devices (seats, separation walls, luggage racks, etc.)

Component type-approval number(s): ..................................................................................

For the complete device: seat, separation wall, luggage racks, etc. ( 1 )

Gas used as refrigerant in the air-conditioning system: ....................................................

The air-conditioning system is designed to contain fluorinated greenhouse gases with

global warming potential higher than 150: yes/no ( 1 )

If yes, fill in the following sections

Drawing and brief description of the air-conditioning system, including the reference

or part number and material of the leak components: .......................................................

Leakage of the air-conditioning system

Reference or part number and material of the components of the system and

information about the test (e.g. test report number, approval number, etc.): ...................

Overall leakage in g/year of the entire system: ..................................................................

External projections

General arrangement (drawing or photographs) indicating the position of the

VER|JONI ELETTRONIKA

attached sections and views

Drawings and/or photographs, for example, and where relevant, of the door and

window pillars, air-intake grilles, radiator grille, windscreen wipers, rain gutter

channels, handles, slide rails, flaps, door hinges and locks, hooks, eyes, decorative

trim, badges, emblems and recesses and any other external projections and parts of

the exterior surface which can be regarded as critical (e.g. lighting equipment). If the

parts listed in the previous sentence are not critical, for documentation purposes they

may be replaced by photographs, accompanied if necessary by dimensional details

and/or text

Drawings of parts of the external surface in accordance with Annex I, item 6.9.1 to

Directive 74/483/EEC: ..................................................................................................................

Drawing of bumpers: ..........................................................................................................

Drawing of the floor line: ................................................................................................

Safety belts and/or other restraint systems

Number and position of safety belts and restraint systems and seats on which they

can be used

(L = left-hand side, R = right-hand side, C = centre)

Complete EC

Variant, if

Belt adjustment

type-

applicable

device for

approval

height (indicate

mark

yes/no/

optional)

{

First row of seats

L

C

First row of seats

R

First row of seats

L

{

Second row of seats ( * )

C

Second row of seats ( * )

R

Second row of seats ( * )

(*) The table may be extended as necessary for vehicles with more than two rows of

seats or if there are more than three seats across the width of the vehicle.

Nature and position of supplementary restraint systems (indicate yes/no/optional)

(L = left-hand side, R = right-hand side, C = centre))

Front airbag

Side airbag

Belt pre-

loading device

{

First row of seats

L

C

First row of seats

R

First row of seats

L

{

Second row of seats ( * )

C

Second row of seats ( * )

R

*

Second row of seats ( )

(*) The table may be extended as necessary for vehicles with more than two rows of

seats or if there are more than three seats across the width of the vehicle.

VER|JONI ELETTRONIKA

Number and position of safety belt anchorages and proof of compliance with

Directive 76/115/EEC, (i.e. EC type-approval number or test report): ...........................

A brief description of the electrical/electronic components (if any): .................................

Safety belt anchorages

Photographs and/or drawings of the bodywork showing the position and dimensions

of the actual and the effective anchorages including the R-points: ..................................

Drawings of the belt anchorages and parts of the vehicle structure where they are

attached (with the material indication): .............................................................................

Designation of the types ( u ) of safety belt authorised for fitting to the anchorages with

which the vehicle is equipped

Anchorage location

Vehicle

Seat structure

structure

First row of seats

{

outboard

{

Lower

anchorages

inboard

Right-hand seat

Upper

anchorages

{

right

{

Lower

anchorages

left

Centre seat

Upper

anchorages

{

outboard

{

Lower

anchorages

inboard

Left-hand seat

Upper

anchorages

Second row of

seats (*)

{

outboard

{

Lower

anchorages

inboard

Right-hand seat

Upper

anchorages

{

right

{

Lower

anchorages

left

Centre seat

Upper

anchorages

{

outboard

{

Lower

anchorages

inboard

Left-hand seat

Upper

anchorages

(*) The table may be extended as necessary for vehicles with more than two rows of

seats or if there are more than three seats across the width of the vehicle.

Description of a particular type of safety belt where an anchorage is located in the

seat backrest or incorporates an energy dissipating device

Space for mounting rear registration plates (give range where appropriate,

drawings may be used where applicable)

Height above road surface, upper edge: .............................................................................

VER|JONI ELETTRONIKA

Height above road surface, lower edge: .............................................................................

Distance of the centre line from the longitudinal median plane of the vehicle: ............

Distance from the left vehicle edge: ......................................................................................

Dimensions (length × width): ................................................................................................

Inclination of the plane to the vertical: .............................................................................

Angle of visibility in the horizontal plane: ......................................................................

Rear under-run protection

Presence: yes/no/incomplete ( 1 )

Drawing of the vehicle parts relevant to the rear under-run protection, i.e. drawing of

the vehicle and/or chassis with position and mounting of the widest rear axle, drawing

of the mounting and/or fitting of the rear under-run protection. If the under-run

protection is not a special device, the drawing must clearly show that the required

dimensions are met: ............................................................................................................

In case of a special device, full description and/or drawing of the rear under-run

protection (including mountings and fittings), or, if approved as separate technical

unit, type-approval number: ...............................................................................................

Wheel guards

Brief description of the vehicle with regard to its wheel guards: .....................................

Detailed drawings of the wheel guards and their position on the vehicle showing the

dimensions specified in Figure 1 of Annex I to Directive 78/549/EEC and taking

account of the extremes of tyre/wheel combinations: ........................................................

Statutory plates

Photographs and/or drawings of the locations of the statutory plates and inscriptions

and of the vehicle identification number: ............................................................

Photographs and/or drawings of the statutory plate and inscriptions (completed

example with dimensions): .................................................................................................

Photographs and/or drawings of the vehicle identification number (completed example

with dimensions): .......................................................................................................................

Manufacturer’s declaration of compliance with the requirements set out in point

3.1.1.1 of Annex to Council Directive 76/114/EEC (OJ L 24, 30.1.1976, p. 1): ............

The meaning of characters in the second section and, if applicable, in the third section

used to comply with the requirements of section 5.3 of ISO Standard 3779-1983 shall

be explained: ....................................................................................................................

If characters in the second section are used to comply with the requirements of section

5.4 of ISO Standard 3779-1983 these characters shall be indicated: ...............................

Radio interference/electromagnetic compatibility

VER|JONI ELETTRONIKA

Description and drawings/photographs of the shapes and constituent materials of the

part of the body forming the engine compartment and the part of the passenger

compartment nearest to it: .............................................................................................

Drawings or photographs of the position of metal components housed in the engine

compartment (e.g. heating appliances, spare wheel, air filter, steering mechanism,

etc.): ......................................................................................................................................

Table and drawing of radio-interference control equipment: ...........................................

Particulars of the nominal value of the direct current resistance, and, in the case of

resistive ignition cables, of their nominal resistance per metre: ......................................

Lateral protection

Presence: yes/no/incomplete ( 1 )

Drawing of the vehicle parts relevant to the lateral protection, i.e. drawing of the vehicle

and/or chassis with position and mounting of the axle(s), drawing of the mountings

and/or the fittings of lateral protection device(s). If the lateral protection is achieved

without lateral protection device(s) the drawing must clearly show that the required

dimensions are met: ............................................................................................................

In the case of lateral protection device(s), full description and/or drawing of such

device(s) (including mountings and fittings) or its/their component EC type-approval

number(s): ............................................................................................................................

Spray-suppression system

Presence: yes/no/incomplete ( 1 )

Brief description of the vehicle with regard to its spray-suppression system and the

constituent components: .....................................................................................................

Detailed drawings of the spray-suppression system and its position on the vehicle

showing the dimensions specified in the figures in Annex III to Directive 91/226/EEC

and taking account of the extremes of tyre/wheel combinations: ....................................

Type-approval number(s) of spray-suppression device(s), if available: ............................

Side-impact resistance

A detailed description, including photographs and/or drawings, of the vehicle with

respect to the structure, the dimensions, the lines and the constituent materials of the

side walls of the passenger compartment (exterior and interior), including specific

details of the protection system, where applicable: ...........................................................

Front under-run protection

Presence: yes/no/incomplete ( 1 )

Drawing of the vehicle parts relevant to the front under-run protection, i.e. drawing of

the vehicle and/or chassis with position and mounting and/or fitting of the front

under-run protection. If the under-run protection is no special device, the drawing

must clearly show that the required dimensions are met: ..............................................

In the case of special device, full description and/or drawing of the front under-run

VER|JONI ELETTRONIKA

protection (including mountings and fittings), or, if approved as a separate technical

unit, type-approval number: ............................................................................................

Pedestrian protection

A detailed description, including photographs and/or drawings, of the vehicle with

respect to the structure, the dimensions, the relevant reference lines and the constituent

materials of the frontal part of the vehicle (interior and exterior), including detail of any

active protection system installed.

Frontal protection systems

General arrangement (drawings or photographs) indicating the position and

attachment of the frontal protection systems

Complete details of fittings required and full instructions, including torque

requirements, for fitting

Drawing of bumpers

Drawing of the floor line at the vehicle front end

10. LIGHTING AND LIGHT SIGNALLING DEVICES

Table of all devices: number, make, model, EC type-approval mark, maximum

intensity of main-beam headlamps, colour, tell-tale: .........................................................

Drawing of the position of lighting and light signalling devices: ....................................

For every lamp and reflector specified in Council Directive 76/756/EEC (OJ L 262,

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 27 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

9.1976, p. 1) supply the following information (in writing and/or by diagram)

Drawing showing the extent of the illuminating surface: .................................................

Method used for the definition of the apparent surface in accordance with paragraph

2.10 of UNECE Regulation No 48 (OJ L 137, 30.5.2007, p. 1): .....................................

Axis of reference and centre of reference: .........................................................................

Method of operation of concealable lamps: ......................................................................

Any specific mounting and wiring provisions: .................................................................

Dipped beam lamps: normal orientation in accordance to paragraph 6.2.6.1 of

UNECE Regulation No 48: ................................................................................................

Value of initial adjustment: ....................................................................................................

VER|JONI ELETTRONIKA

Location of indication: ........................................................................................................

Description/drawing ( 1 ) and type of

headlamp levelling device (e.g. automatic,

st epw ise ma nu all y a dj us tab le,

Applicable only for

continuously manually adjustable): .........

vehicles with

Control device: ................................................

headlamp levelling

device

Reference marks: ............................................

Marks assigned for loading conditions: ......

A brief description of electrical/electronic components other than lamps (if any): ........

11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND SEMI-

TRAILERS

Class and type of the coupling device(s) fitted or to be fitted: ..........................................

Characteristics D, U, S and V of the coupling device(s) fitted or minimal characteristics

D, U, S and V of the coupling device(s) to be fitted: ................................ daN

Instructions for attachment of the coupling type to the vehicle and photographs or

drawings of the fixing points at the vehicle as stated by the manufacturer; additional

information, if the use of the coupling type is restricted to certain variants or versions

of the vehicle type: ..............................................................................................................

Information of the fitting of special towing brackets or mounting plates: ....................

Type-approval number(s): ........................................................................................................

12. MISCELLANEOUS

Audible warning device(s)

Location, method of affixing, placement and orientation of the device(s), with

dimensions: ..........................................................................................................................

Number of device(s): .................................................................................................................

Type-approval number(s): ........................................................................................................

Electrical/pneumatic ( 1 ) circuit diagram: ..............................................................................

Rated voltage or pressure: ...................................................................................................

Drawing of the mounting device: .......................................................................................

Devices to prevent unauthorised use of the vehicle

Protective device

A detailed description of the vehicle type with regard to the arrangement and design

of the control or of the unit on which the protective device acts: .....................................

Drawings of the protective device and of its mounting on the vehicle: .........................

A technical description of the device: ................................................................................

VER|JONI ELETTRONIKA

Details of the lock combinations used: ..............................................................................

Vehicle immobiliser

Type-approval number, if available: .....................................................................................

For immobilisers not yet approved

A detailed technical description of the vehicle immobiliser and of the measures taken

against inadvertent activation: ............................................................................................

The system(s) on which the vehicle immobiliser acts: .....................................................

Number of effective interchangeable codes, if applicable: .................................................

Alarm system (if any)

Type-approval number, if available: .....................................................................................

For alarm systems not yet approved

A detailed description of the alarm system and of the vehicle parts related to the alarm

system installed: ......................................................................................................................

A list of the main components comprising the alarm system: .......................................

A brief description of the electrical/electronic components (if any): .................................

Towing device(s)

Front: Hook/eye/other ( 1 )

Rear: Hook/eye/other/none ( 1 )

Drawing or photograph of the chassis/area of the vehicle body showing the position,

construction and mounting of the towing device(s): .........................................................

Details of any non-engine related devices designed to influence fuel consumption (if

not covered by other items): ...............................................................................................

Speed limitation devices

Manufacturer(s): ............................................................................................................................

Type(s): ........................................................................................................................................................

Type-approval number(s), if available: ....................................................................................

Speed or range of speeds at which the speed limitation may be set: ............... km/h

Table of installation and use of RF transmitters in the vehicle(s), if applicable

Frequency bands (Hz) max. output power (W) antenna position at vehicle,

specific conditions for installation

and/or use

The applicant for type-approval must also supply, where appropriate

VER|JONI ELETTRONIKA

Appendix 1

A list containing make and type of all electrical and/or electronic components

concerned by Commission Directive 72/245/EEC (OJ L 152, 6.7.1972, p. 15).

Appendix 2

Schematics or drawing of the general arrangement of electrical and/or electronic

components concerned by Directive 2004/104/EC and the general wiring harness

arrangement.

Appendix 3

Description of vehicle chosen to represent the type

Body style

Left or right hand drive ( 1 )

Wheelbase

Appendix 4

Relevant test report(s) supplied by the manufacturer or approved/recognised

laboratories for the purpose of drawing up the type-approval certificate.

Vehicle equipped with a 24 GHz short-range radar equipment: yes/no ( 1 )

13. SPECIAL PROVISIONS FOR BUSES AND COACHES

Class of vehicle (Class I, Class II, Class III, Class A, Class B) ( 1 )

Type-approval number of bodywork approved as a separate technical unit: .................

Chassis types where the type-approved bodywork can be installed (manufacturer(s),

and types of incomplete vehicle): ......................................................................................

Area for passengers (m 2 )

Total (S 0 ): ............................................................................................................................

Upper deck (S 0 a) ( 1 ): ...........................................................................................................

Lower deck (S 0 b) ( 1 ): ..........................................................................................................

For standing passengers (S 1 ): .............................................................................................

Number of passengers (seated and standing)

Total (N): .............................................................................................................................

Upper deck (N a ) ( 1 ): ............................................................................................................

Lower deck (N b ) ( 1 ): ...........................................................................................................

Number of passengers seated

Total (A): .............................................................................................................................

VER|JONI ELETTRONIKA

Upper deck (A a ) ( 1 ): ............................................................................................................

Lower deck (A b ) ( 1 ): ...........................................................................................................

Number of wheelchair positions for category M 2 and M 3 vehicles: ...............................

Number of service doors: .................................................................................................

Number of emergency exits (doors, windows, escape hatches, intercommunication

staircase and half staircase): ................................................................................................

Total: ....................................................................................................................................

Upper deck ( 1 ): ....................................................................................................................

Lower deck ( 1 ): ....................................................................................................................

Volume of luggage compartments (m 3 ): ........................................................................

Area of luggage transportation of the roof (m 2 ): ..........................................................

Technical service facilitating the access to vehicles (e.g. Ramp, lifting platform,

kneeling system), if fitted: ..................................................................................................

Strength of superstructure

Type-approval number, if available: .....................................................................................

For superstructures not yet approved

Detailed description of the superstructure of the vehicle type including its

dimensions, configuration and constituent materials and its attachment to any chassis

frame: ...................................................................................................................................

Drawings of the vehicle and those parts of its interior arrangement which have an

influence on the strength of the superstructure or on the residual space: ........................

Position of centre of gravity of the vehicle in running order in the longitudinal,

transverse and vertical directions: ......................................................................................

Maximum distance between the centre lines of the outboard passenger seats: ...............

Points of Directive 2001/85/EC of the European parliament and of the Council

(OJ L 42, 13.2.2002, p. 1) to be accomplished and demonstrated for this technical

unit: ......................................................................................................................................

14. SPECIAL PROVISIONS FOR VEHICLES INTENDED FOR THE TRANSPORT OF

DANGEROUS GOODS

Electrical equipment according to Council Directive 94/55/EC (OJ L 319,

12.12.1994, p. 1)

Protection against overheating of conductors: ..................................................................

Type of circuit breaker: .......................................................................................................

Type and operation of battery master switch: .................................................................

VER|JONI ELETTRONIKA

Description and location of safety barrier for tachograph: .............................................

Description of permanently energised installations. Indicate the EN standard applied

Construction and protection of electrical installation situated to the rear of the

driver’s compartment: .....................................................................................................

Prevention of fire risks

Type of not readily flammable material in the driver’s compartment: ............................

Type of heat shield behind the driver’s compartment (if applicable): .............................

Position and heat protection of engine: ...........................................................................

Position and heat protection of the exhaust system: .......................................................

Type and design of the endurance braking systems heat protection: ............................

Type, design and position of combustion heaters: .........................................................

Special requirements for bodywork, if any, according to Directive 94/55/EC

Description of measures to comply with the requirements for Type EX/II and Type EX/

III vehicles: ..............................................................................................................................

In the case of Type EX/III vehicles, resistance against heat from the outside: ..................

15. REUSABILITY, RECYCLABILITY AND RECOVERABILITY

Version to which the reference vehicle belongs: ...............................................................

Mass of the reference vehicle with bodywork or mass of the chassis with cab, without

bodywork and/or coupling device if the manufacturer does not fit the bodywork and/or

coupling device (including liquids, tools, spare wheel, if fitted) without driver: ............

Mass of materials of the reference vehicle: ........................................................................

Mass of material taken into account at the pre-treatment step ( v ): ...................................

Mass of the material taken into account at the dismantling step ( v ): ................................

Mass of material taken into account at the non-metallic residue treatment step,

considered as recyclable ( v ): ...............................................................................................

Mass of material taken into account at the non-metallic residue treatment step,

considered as energy recoverable ( v ): ................................................................................

Materials breakdown ( v ): ....................................................................................................

Total mass of materials, which are reusable and/or recyclable: .......................................

Total mass of materials, which are reusable and/or recoverable: .....................................

Rates

Recyclability rate “Rcyc ” (%): ..........................................................................................

VER|JONI ELETTRONIKA

15.4.2.

Recoverability rate “Rcov ” (%): .......................................................................................

16. ACCESS TO VEHICLE REPAIR AND MAINTENANCE INFORMATION

16.1.

Address of principal website for access to vehicle repair and maintenance information

16.1.1.

Date from which it is available (no later than 6 months from the date of type-

approval): .............................................................................................................................

16.2.

Terms and conditions of access to website: .......................................................................

16.3.

Format of the vehicle repair and maintenance information accessible through website

Explanatory notes

(1)

Delete where not applicable (there are cases where nothing needs to be deleted when more than one

entry is applicable).

(2)

Specify the tolerance.

(3)

Please fill in here the upper and lower values for each variant.

(4)

Only for the purpose of definition of off-road vehicles.

(5)

Set out in such a way as to make the actual value clear for each technical configuration of the vehicle

type.

(6)

Vehicles can be fuelled with both petrol and a gaseous fuel but, where the petrol system is fitted for

emergency purposes or starting only and of which the petrol tank cannot contain more than 15 litres of

petrol, will be regarded for the test as vehicles which can only run a gaseous fuel.

(a)

If a part has been type-approved, that part need not be described if reference is made to such approval.

Similarly, a part need not be described if its construction is clearly apparent from the attached diagrams or

drawings. For each item for which drawings or photographs must be attached, give numbers of the

corresponding attached documents.

(b)

If the means of identification of type contains characters not relevant to describe the vehicle, component

or separate technical unit types covered by this information document, such characters shall be

represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).

(c)

Classified according to the definitions listed in Schedule II, Section A.

(d)

If possible, designation according to Euronorm, otherwise give

-

description of the material,

-

yield point,

-

ultimate tensile stress,

-

elongation (in %),

-

Brinell hardness.

(e)

‘Forward control’ as defined in point 2.7 of Annex I to Council Directive 74/297/EEC (OJ L

165, 20.6.1974, p. 16 .

(f)

Where there is one version with a normal cab and another with a sleeper cab, both sets of masses

VER|JONI ELETTRONIKA

and dimensions are to be stated.

(g)

ISO Standard 612 – 1978 - Road vehicles - Dimensions of motor vehicles and towed vehicles - terms

and definitions.

Motor vehicle and drawbar trailer: term No 6.4.1.

Semi-trailer and centre-axle trailer: term No 6.4.2.

Note: In the case of a centre-axle trailer, the axis of the coupling shall be considered as the

foremost axle.

Term No 6.19.2.

Term No 6.20.

Term No 6.5

Term No 6.1 and for vehicles other than those of category M1: point 2.4.1 of Annex I to

Directive 97/27/EC of the European Parliament and of the Council (OJ L 233, 25.8.1997, p. 1).

In the case of trailers, the lengths shall be specified as mentioned in term No 6.1.2 of Standard

ISO 612: 1978.

Term No 6.17.

Term No 6.2 and for vehicles other than those of category M1: point 2.4.2 of Annex I to

Directive 97/27/EC.

Term No 6.3 and for vehicles other than those of category M1: point 2.4.3 of Annex I to

Directive 97/27/EC.

Term No 6.6.

(g10) Term No 6.10.

(g11) Term No 6.7.

(g12) Term No 6.11.

(g13) Term No 6.18.1.

(g14) Term No 6.9.

(h)

The mass of the driver and, if applicable, of the crew member is assessed at 75 kg (subdivided

into 68 kg occupant mass and 7 kg luggage mass according to ISO Standard 2416 – 1992), the

fuel tank is filled to 90% and the other liquid containing systems (except those for used water) to

100% of the capacity specified by the manufacturer.

(i)

For trailers or semi-trailers, and for vehicles coupled with a trailer or a semi-trailer, which exert

a significant vertical load on the coupling device or the fifth wheel, this load, divided by

standard acceleration of gravity, is included in the maximum technically permissible mass.

(j)

“Coupling overhang” is the horizontal distance between the coupling for centre-axle trailers and

the centreline of the rear axle(s).

(k)

In the case of a vehicle that can run either on petrol, diesel, etc., or also in combination with

another fuel, items shall be repeated. In the case of non-conventional engines and systems,

particulars equivalent to those referred to here shall be supplied by the manufacturer.

(l)

This figure shall be rounded off to the nearest tenth of a millimetre.

This value shall be calculated (π = 3,1416) and rounded off to the nearest cm 3 .

(m)

(n)

Determined in accordance with the requirements of Council Directive 80/1269/EEC (OJ L 375,

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 31 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

12.1980, p. 46).

VER|JONI ELETTRONIKA

(o)

Determined in accordance with the requirements of Council Directive 80/1268/EEC (OJ L 375,

31.12.1980, p. 36).

(p)

The specified particulars are to be given for any proposed variants.

(q)

With respect to trailers, maximum speed permitted by the manufacturer.

(r)

For tyres of category Z intended to be fitted on vehicles whose maximum speed exceeds 300

km/h equivalent information shall be provided.

(s)

The number of seating positions to be mentioned shall be the one when the vehicle is in motion.

A range can be specified in case of modular arrangement.

(t)

“R-point” or “seating reference point” means a design point defined by the vehicle manufacturer

for each seating position and established with respect to the three-dimensional reference system

as specified in Annex III to Council Directive 77/649/EEC (OJ L 267, 19.10.1977).

(u)

For symbols and marks to be used, see Annex III, items 1.1.3 and 1.1.4 to Council Directive 77/

541/EEC (OJ L 220, 29.8.1977, p. 95). In the case of “S” type belts, specify the nature of the

type(s).

(v)

These terms are defined in the standard ISO 22628: 2002 - Road vehicles - recyclability and

recoverability - calculation method. ".

VER|JONI ELETTRONIKA

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 37 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

10 Radio interference

Directive

L 152, 6.7.1972, p.

X

(electro-magnetic

72/245/EEC

15. compatibility)

11 Diesel smoke

Directive

L 190, 20.8.1972,

X

72/306/EEC

p. 1.

12 Interior fittings

Directive

L 38, 11.2.1974, p.

X

74/60/EEC

2. 13 Anti-theft and

Directive

L 38, 11.2.1974, p.

X

immobiliser

74/61/EEC

22. 14 Protective steering

Directive

L 165, 20.6.1974,

X

74/297/EEC

p. 16.

15 Seat strength

Directive

L 221, 12.8.1974,

X

74/408/EEC

p. 1.

16 Exterior projections

Directive

L 256, 2.10.1974,

X

74/483/EEC

p. 4.

17 Speedometer and reverse Directive

L 196, 26.7.1975,

X

gear

75/443/EEC

p. 1.

18 Plates (statutory)

Directive

L 24, 30.1.1976, p.

X

76/114/EEC

1. 19 Seat belt anchorages

Directive

L 24, 30.1.1976, p.

X

76/115/EEC

6. 20 Installation of lighting

Directive

L 262, 27.9.1976,

X

and light signalling

76/756/EEC

p. 1.

devices

VER|JONI ELETTRONIKA

Subject

Regulatory act

Official Journal

Applicability

reference

21 Retro reflectors

Directive

L 262, 27.9.1976,

X

76/757/EEC

p. 32.

22 End-outline, front-

Directive

L 262, 27.9.1976,

X

position (side), rear-

76/758/EEC

p. 54.

position (side), stop, side

marker, daytime running

lamps

23 Direction indicators

Directive

L 262, 27.9.1976,

X

76/759/EEC

p. 71.

24 Rear registration plate

Directive

L 262, 27.9.1976,

X

lamps

76/760/EEC

p. 85.

25 Headlamps (including

Directive

L 262, 27.9.1976,

X

bulbs)

76/761/EEC

p. 96.

26 Front fog lamps

Directive

L 262, 27.9.1976,

X

76/762/EEC

p. 122.

27 Towing hooks

Directive

L 145, 13.6.1977,

X

77/389/EEC

p. 41.

28 Rear fog lamps

Directive

L 220, 29.8.1977,

X

77/538/EEC

p. 60.

29 Reversing lamps

Directive

L 220, 29.8.1977,

X

77/539/EEC

p. 72.

30 Parking lamps

Directive

L 220, 29.8.1977,

X

77/540/EEC

p. 83.

31 Seat belts and restraint

Directive

L 220, 29.8.1977,

X

systems

77/541/EEC

p. 95.

32 Forward vision

Directive

L 267, 19.10.1977,

X

77/649/EEC

p. 1.

33 Identification of

Directive

L 81, 28.3.1978,

X

controls, telltales and

78/316/EEC

p. 3.

indicators

( 1 )

34 Defrost/demist

Directive

L 81, 28.3.1978, p.

X

78/317/EEC

27. ( 2 )

( 2 )

35 Wash/wipe

Directive

L 81, 28.3.1978, p.

X

78/318/EEC

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 49 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

36 Heating systems

Directive

L 292, 9.11.2001,

X

2001/56/EC

p. 21.

37 Wheel guards

Directive

L 168, 26.6.1978,

X

78/549/EEC

p. 45.

38 Head restraints

Directive

L 325, 20.11.1978,

X

78/932/EEC

p. 1.

39 CO 2 emissions/fuel

Directive

L 375, 31.12.1980,

X

consumption

80/1268/EEC

p.36.

40 Engine power (repealed

Directive

L 375, 31.12.1980,

X

with effect from 31 Dec

80/1269/EEC

p.46.

2013)

41 Emissions (Euro IV and

Directive

L 275, 20.10.2005, X

X

( 10 )

( 10 ) ( 10 )

V) heavy-duty vehicles

2005/55/EC

p. 1.

(repealed with effect

from 31 Dec 2013)

41 Emissions (Euro VI)

Regulation

L 188, 18.7.2009,

X

( 12 )

( 12 ) ( 12 )

a heavy-duty vehicles/

(EC) 595/2009 p. 1.

access to information

(shall apply from 31 Dec

2013)

42 Lateral protection

Directive

L 124, 5.5.1989, p.

X

89/297/EEC

1. 43 Spray-suppression

Directive

L 103, 23.4.1991,

X

systems

91/226/EEC

p. 5.

44 Masses and dimensions

Directive

L 129, 14.5.1992,

X

(cars)

92/21/EEC

p. 1.

45 Safety glazing

Directive

L 129, 14.5.1992,

X

92/22/EEC

p. 11.

46 Tyres

Directive

L 129, 14.5.1992,

X

92/23/EEC

p. 95.

VER|JONI ELETTRONIKA

Subject

Regulatory act

Official Journal

Applicability

reference

47 Speed limitation devices Directive

L 129, 14.5.1992,

X

92/24/EEC

p. 154.

48 Masses and dimensions

Directive

L 233, 28.8.1997,

X

(other than vehicles

97/27/EC

p. 1.

referred to in item 44)

49 External projections of

Directive

L 409, 31.12.1992,

X

92/114/EEC

p.17.

Directive

L 195, 29.7.1994,

X

94/20/EC

p. 1.

51 Flammability

Directive

L 281, 23.11.1995,

X

95/28/EC

p. 1.

52 Buses and coaches

Directive

L 42, 13.2.2002, p.

X

2001/85/EC

1. L 18, 21.1.1997, p. X( 6 )

53 Frontal impact

Directive

96/79/EC

7. 54 Side impact

Directive

L 169, 8.7.1996, p. X

X

( 11 )

96/27/EC

1. 56 Vehicles intended for the Directive

L 11, 16.1.1999, p.

X

( 4 )

transport of dangerous

98/91/EC

25. 57 Front under-run

Directive

L 203, 10.8.2000,

X

2000/40/EC

p. 9.

58 Pedestrian protection

Regulation

L 35, 4.2.2009,

X

(EC)78/2009

p.1.

59 Recyclability

Directive

L 310, 25.11.2005,

X

-

2005/64/EC

p.10.

61 Air-conditioning systems Directive

L 161, 14.6.2006,

X

( 8 )

2006/40/EC

p.12.

62 Hydrogen system

Regulation

L 35, 14.2.2006,

X

(EC)79/2009

p.32.

Regulatory act applicable.

(1)

Vehicles of this category shall be fitted with an adequate windscreen defrosting and demisting device.

(2)

Vehicles of this category shall be fitted with adequate windscreen washing and wiping devices.

(3)

The requirements of Directive 94/20/EC shall only apply to vehicles equipped with couplings.

(4)

The requirements of Directive 98/91/EC shall only apply when the manufacturer applies for the type-

approval of a vehicle intended for the transport of dangerous goods.

(5)

In case of LPG or CNG vehicles, pending the adoption of the relevant amendments to Directive 70/221/EEC

in order to include LPG and CNG tanks, a vehicle approval in accordance with UNECE Regulation 67, as

amended by the 01 series of amendments or UNECE Regulation No. 110 is required.

(6)

Not exceeding 2,5 tonnes technically permissible maximum laden mass.

(8)

Only for vehicles of category N1, class I as described in the first table in point 5.3.1.4 of Annex I to

Directive 70/220/EEC.

(9)

For vehicles with a reference mass not exceeding 2610kg.At the manufacturer’s request may apply to

vehicles with a reference mass not exceeding 2840kg.

(10)

For vehicles with a reference mass exceeding 2610kg and which did not benefit from the opportunity

offered in footnote (9).

(11)

Only applicable to vehicles where the “seating reference point (‘R’ point)” of the lowest seat is not more

than 700mm high above the ground level. The “R” point is defined in Directive 77/649/EEC.

(12)

For vehicles with reference mass exceeding 26100kg which are not type-approved (at the manufacturer’s

request and provided their reference mass does not exceed 2840kg) under Regulation (EC) No 715/2007.

VER|JONI ELETTRONIKA

Appendix 1

List of regulatory acts for type-approval of vehicles belonging to the category M1, produced in small

series pursuant to Article 22 of the Directive

Subject

Regulatory act

Official Journal

reference

Permissible sound level

Directive

L 42, 23.2.1970, p. 16.

A

70/157/EEC

Emissions with the exception of the whole set

Directive

L 76, 6.4.1970, p. 1.

A

of requirements relating to On Board

70/220/EEC

Diagnostics (OBDs)

2a Emissions (Euro 5 and 6) with the exception of Regulation

L 171, 29.6.2007, p. 1.

A

the whole set of requirements relating to On

(EC)715/2007

Board Diagnostics (OBDs) and access to

information

3 Fuel tanks/Rear protective devices

Directive

L 76, 6.4.1970, p. 23.

B

70/221/EEC

4 Rear registration plate space

Directive

L 76, 6.4.1970, p. 25.

B

70/222/EEC

5 Steering effort

Directive

L 133, 18.6.1970, p. 10.

C

70/311/EEC

6 Door latches and hinges

Directive

L 176, 10.8.1970, p. 5.

C

70/387/EEC

7 Audible warning

Directive

L 176, 10.8.1970, p. 12.

B

70/388/EEC

X( 2 ) B( 4 )

8 Indirect vision devices

Directive

L 25, 29.1.2004, p. 1.

2003/97/EC

9 Braking

Directive

L 202, 6.9.1971, p. 37.

A

71/320/EEC

A( 1 ) C( 3 )

10 Radio interference (electromagnetic

Directive

L 152, 6.7.1972, p. 15.

compatibility)

72/245/EEC

11 Diesel smoke

Directive

L 190, 20.8.1972, p. 1.

A

72/306/EEC

12 Interior fittings

Directive

L 38, 11.2.1974, p. 2.

C

74/60/EEC

13 Anti-theft and immobiliser

Directive

L 38, 11.2.1974, p. 22.

A

74/61/EEC

14 Protective steering

Directive

L 165, 20.6.1974, p. 16.

C

74/297/EEC

15 Seat strength

Directive

L 221, 12.8.1974, p. 1.

C

74/408/EEC

16 Exterior projections

Directive

L 266, 2.10.1974, p. 4.

C

74/483/EEC

17 Speedometer and reverse gear

Directive

L 196, 26.7.1975, p. 1.

B

75/443/EEC

18 Plates (statutory)

Directive

L 24, 30.1.1976, p. 1.

B

76/114/EEC

19 Seat belt anchorages

Directive

L 24, 30.1.1976, p. 6.

B

76/115/EEC

20 Installation of lighting and light signalling

Directive

L 262, 27.9.1976, p. 1.

B

devices

76/756/EEC

21 Retro reflectors

Directive

L 262, 27.9.1976, p. 32.

X

76/757/EEC

22 End-outline, front position (side), rear-position Directive

L 262, 27.9.1976, p. 54.

X

(side), stop, side marker, daytime running lamps 76/758/EEC

23 Direction indicators

Directive

L 262, 27.9.1976, p. 71.

X

76/759/EEC

VER|JONI ELETTRONIKA

Subject

Regulatory act

Official Journal

reference

24 Rear registration plate lamps

Directive

L 262, 27.9.1976, p. 85.

X

76/760/EEC

25 Headlamps (including bulbs)

Directive

L 262, 27.9.1976, p. 96.

X

76/761/EEC

26 Front fog lamps

Directive

L 262, 27.9.1976, p. 122.

X

76/762/EEC

27 Towing hooks

Directive

L 145, 13.6.1977, p. 41.

B

77/389/EEC

28 Rear fog lamps

Directive

L 220, 29.8.1977, p. 60.

X

77/538/EEC

29 Reversing lamps

Directive

L 220, 29.8.1977, p. 72.

X

77/539/EEC

30 Parking lamps

Directive

L 220, 29.8.1977, p. 83.

X

77/540/EEC

A( 2 ) B( 4 )

31 Seat belts and restraint systems

Directive

L 220, 29.8.1977, p. 95.

77/541/EEC

32 Forward vision

Directive

L 267, 19.10.1977, p. 1.

A

77/649/EEC

33 Identification of controls, tell-tales and

Directive

L 81, 28.3.1978, p. 3.

X

indicators

78/316/EEC

34 Defrost/Demist

Directive

L 81, 28.3.1978, p. 27.

C

78/317/EEC

35 Wash/Wipe

Directive

L 81, 28.3.1978, p. 49.

C

78/318/EEC

36 Heating system

Directive

L 292, 9.11.2001, p. 21.

C

2001/56/EC

37 Wheel guards

Directive

L 168, 26.6.1978, p. 45.

B

78/549/EEC

39 CO 2 emissions/Fuel consumption

Directive

L 375, 31.12.1980, p. 36.

A

80/1268/EEC

40 Engine power (repealed with effect from 31 Dec

Directive

L 375, 31.12.1980, p. 46.

C

80/1269/EEC

2013)

41 Emissions (Euro IV and V) heavy-duty vehicles Directive

L 275, 20.10.2005, p. 1.

A

with the exception of the whole set of

2005/55/EC

requirements relating to On Board Diagnostics

(OBDs) (repealed with effect from 31 Dec 2013)

41a Emissions (Euro VI) heavy-duty vehicles /

Regulation

L 188, 18.7.2009, p. 1.

A

access to information (shall apply from 31 Dec

(EC) 595/2009

2013)

44 Masses and dimensions (cars)

Directive

L 129, 14.5.1992, p. 1.

C

92/21/EEC

X( 2 ) B( 4 )

45 Safety glazing

Directive

L 129, 14.5.1992, p. 11.

92/22/EEC

X( 2 ) B( 4 )

46 Tyres

Directive

L 129, 14.5.1992, p. 95.

92/23/EEC

X( 2 ) A( 4 )

50 Couplings

Directive

L 195, 29.7.1994, p. 1.

94/20/EC

53 Frontal impact

Directive

L 18, 21.1.1997, p. 7.

N/A

96/79/EC

54 Side impact

Directive

L 169, 8.7.1996, p. 1.

N/A

96/27/EC

58 Pedestrian protection

2003/102/EC

L 321, 6.12.2003, p. 15.

N/A

(1)

Electronic sub-assembly

(2)

Component

(3)

Vehicle

VER|JONI ELETTRONIKA

(4)

Installation prescriptions

(5)

Until 26 January 2006 approvals according Directive 71/127/EEC can be accepted as

alternative.

Full compliance with regulatory act is required; EC type-approval certificate has to be issued;

conformity of production shall be ensured.

No exemptions permitted except those specified in the regulatory act. Type-approval certificate

and type-approval mark are not required. Test reports have to be established by a notified

technical service.

The technical prescriptions of the regulatory act have to be fulfilled. The tests provided for in

the regulatory act have to be performed in their entirety; subject to the agreement of the

approval authority, they may be performed by the manufacturer himself; he may be allowed to

issue the technical report; a type-approval certificate does not have to be issued and type-

approval is not required.

The manufacturer has to demonstrate to the satisfaction of the approval authority that the

essential requirements of the regulatory act are fulfilled.

N/A: This regulatory act is not applicable (no requirements).

PART II

List of UNECE regulations recognised as an alternative to directives or regulations

mentioned in Part I

Where reference is made to a separate Directive or Regulation in the table of Part I, an

approval issued under the following UNECE Regulations to which the Community has acceded as a

Contracting Party to the United Nations Economic Commission for Europe “Revised 1958

Agreement” by virtue of Council Decision 97/836/EC ( 1 ), or subsequent Council decisions as

referred to in Article 3(3) of that Decision, shall be considered as equivalent to an EC type-

approval granted under the relevant separate Directive or Regulation.

Any further amendment of the UNECE Regulations listed below ( 2 ) shall also be deemed to

be equivalent, subject to the Community Decision as referred to in Article 4(2) of Decision 97/836/

Subject

Basic UNECE

Series of

Regulation

amendments

Number

1(*) Permissible sound level

Replacement silencing systems

Emissions

Replacement catalytic converters

Fuel tanks

LPG tanks

CNG tanks

Rear protective device

Steering effort

VER|JONI ELETTRONIKA

Subject

Basic UNECE

Series of

Regulation

amendments

Number

Door latches and hinges

Audible warning

Indirect vision devices

Braking

13H

Brake linings

Radio interference (electromagnetic compatibility)

Diesel smoke

Interior fittings

Anti-theft

Anti-theft immobiliser

Vehicle Alarm Systems

97 116

01 00

Behaviour of steering device under impact

Seat strength

Seat strength (buses and coaches)

Exterior projections

Speedometer

Seat belt anchorages

Installation of lighting and light signalling devices

Retro reflectors

End-outline/front-position (side)/rear-position (side)/stop

lamps

Daytime running lamps

Side marker lamps

Direction indicators

Rear registration plate lamp

Headlamps (R 2 and HS 1 )

Headlamps (sealed beam)

Headlamps (H 1 , H 2 , H 3 , HB 3 , HB 4 , H 7 , and/or H 8 , H 9 ,

HIR1, HIR2 and/or H 11 )

Headlamps (H 4 )

Headlamps (halogen sealed beam)

Filament lamps for use in approved lamp units

Headlamps with gas-discharge light sources

Gas-discharge light sources for use in approved gas-

discharge lamp units

Headlamps (asymmetrical passing beam)

Adaptive front-lighting systems

Front fog lamps

Rear fog lamps

Reversing lamps

Parking lamps

Seat belts and restraint systems

Child restraints

VER|JONI ELETTRONIKA

Subject

Basic UNECE

Series of

Regulation

amendments

Number

Front forward field of vision

Identification of controls, tell-tales and indicators

Heating systems

Head restraints (combined with seats)

Head restraints

CO 2 emissions - Fuel consumption

Engine power

Emissions (Euro IV and V) heavy-duty vehicles

Lateral protection

Safety glazing

Tyres, motor vehicles and their trailers

Tyres, commercial vehicles and their trailers

Temporary-use spare wheels/tyres

Rolling sound

Speed limitation devices

Couplings

Close coupling device

Flammability

Buses and coaches

Strength of superstructure (buses and coaches)

Frontal impact

Side impact

Vehicles intended for the transport of dangerous goods

Front under-run protection

( 1 )

OJ L 346, 17.12.1997, p. 78.

( 2 )

For subsequent amendments, see UNECE TRANS/WP.29/343 in its latest revision.

Where the separate directive or regulation contains installation requirements, these apply also to

components and separate technical units approved in accordance with the UNECE Regulations.

The numbering of the entries in this table refers to the numbering used in the table of Part I. ".

(*)

VER|JONI ELETTRONIKA

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 50 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Couplings

Directive 94/20/EC

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 51 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Flammability

Directive 95/28/EC

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 52 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Buses and coaches

Directive 2001/85/EC

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 53 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Frontal impact

Directive 96/79/EC

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 54 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Side impact

Directive 96/27/EC

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 55 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Vehicles intended for the transport of

Directive 98/91/EC

dangerous goods

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 56 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Front under-run protection

Directive 2000/40/EC

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 57 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Pedestrian protection

Regulation (EC) 78/2009

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 59 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Recyclability

Directive 2005/64/EC

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 61 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Air-conditioning systems

Directive 2006/40/EC

Malta Government Gazette — Legal Notice 2009 330 — EC Type-Approval of Motor Vehicles and their Trailers

Reg. 62 — EC Type-Approval of Motor Vehicles and their Trailers Open official source

Hydrogen system

Regulation (EC) 79/2009

( 1 )

Or UNECE Regulations that are deemed to be equivalent.

VER|JONI ELETTRONIKA

MODEL B

(to be used for type-approval of a system or type-approval of a vehicle with regard to a system)

Maximum format: A4 (210 × 297 mm)

EC TYPE-APPROVAL CERTIFICATE

Stamp of

type- approval authority

Communication concerning

EC type-approval ( 1 )

extension of EC type-approval ( 1 )

of a type of system/type of a vehicle with regard

to a system ( 1 )

refusal of EC type-approval ( 1 )

withdrawal of EC type-approval ( 1 )

with regard to Directive ............/............/EC/Regulation (EC) No ............/............ ( 1 ), as last amended by

Directive ............/............/EC/Regulation (EC) No ............/............ ( 1 )

EC type-approval number

Reason for extension

SECTION I

0.1.

Make (trade name of manufacturer)

0.2.

Type

0.2.1.

Commercial name(s) (if available)

Means of identification of type, if marked on the vehicle ( 2 )

0.3.

0.3.1.

Location of that marking

Category of vehicle ( 3 )

0.4.

0.5.

Name and address of manufacturer

0.8.

Name(s) and address(es) of assembly plant(s)

0.9.

Name and address of manufacturer’s representative (if any)

(1)

Delete where not applicable.

(2)

If the means of identification of type contains characters not relevant to describe the vehicle,

component or separate technical unit types covered by this information document, such characters shall be

represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).

(3)

As defined in Schedule II Section A.

VER|JONI ELETTRONIKA

SECTION II

1. Additional information (where applicable): see Addendum

2. Technical service responsible for carrying out the tests

3. Date of test report

4. Number of test report

5. Remarks (if any): see Addendum

6. Place

7. Date

8. Signature

Attachments

Information package.

Test report.

Addendum to EC type-approval

certificate No …

1. Additional information

1.1.

[…]

1.1.1. […]

[…]

2. Type-approval number of each component or separate technical unit installed on the vehicle

type to comply with these regulations or the Directive

2.1.

[…]

3. Remarks

3.1.

[…]

VER|JONI ELETTRONIKA

MODEL C

(to be used for component/separate technical unit type-approval)

Maximum format: A4 (210 × 297 mm)

EC TYPE-APPROVAL CERTIFICATE

Stamp of

type- approval authority

Communication concerning

EC type-approval ( 1 )

extension of EC type-approval ( 1 )

of a type of component/separate technical unit ( 1 )

refusal of EC type-approval ( 1 )

withdrawal of EC type-approval ( 1 )

with regard to Directive ............./............./EC/Regulation (EC) No ............./............. ( 1 ), as last amended by

Directive ............./............./EC/Regulation (EC) No ............./............. ( 1 )

EC type-approval number

Reason for extension

SECTION I

0.1.

Make (trade name of manufacturer)

0.2.

Type

Means of identification of type, if marked on the component/separate technical unit ( 1 ) ( 2 )

0.3.

0.3.1.

Location of that marking

0.5.

Name and address of manufacturer

0.7.

In the case of components and separate technical units, location and method of affixing of the

EC approval mark

0.8.

Name(s) and address(es) of assembly plant(s)

0.9.

Name and address of the manufacturer’s representative (if any)

(1)

Delete where not applicable.

(2)

If the means of identification of type contains characters not relevant to describe the vehicle, component or

separate technical unit types covered by this information document, such characters shall be represented in

the documentation by the symbol ‘?’ (e.g. ABC??123??).

VER|JONI ELETTRONIKA

SECTION II

1. Additional information (where applicable): see Addendum

2. Technical service responsible for carrying out the tests

3. Date of test report

4. Number of test report

5. Remarks (if any): see Addendum

6. Place

7. Date

8. Signature

Attachments

Information package.

Test report.

Addendum

to EC type-approval certificate No ..................

1. Additional information

1.1.

[…]

1.1.1.

[…]

2. Restriction of use of the device (if any)

2.1.

[…]

3. Remarks

[…]: ".

3.1.

VER|JONI ELETTRONIKA

EC Type-Approval of Motor Vehicles and their Trailers

Table of Provisions (35)

Statutory Text (35 Articles)

Need to analyze how this provision applies to your matter?