Legislator Case Law & Legislation
ln_2009_241 MT

Conformity Assessment of Marine Equipment Regulations, 2009

14 Articles / Provisions · Malta
Open official source Machine-readable Markdown (.md)

Table of Provisions (14)

Statutory Text (14 Articles)

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

Suppliment tal-Gazzetta tal-Gvern ta’ Malta Nru. 18,476, 4 ta’Settembru, 2009

Taqsima B

A.L. 241 ta’ l-2009

PRODUCT SAFETY ACT

(CAP. 427)

Conformity Assessment of Marine Equipment Regulations, 2009

IN exercise of the powers conferred by articles 38 to 40 of the

Product Safety Act, the Minister of Finance, the Economy and

Investment, acting on the advice of the Malta Standards Authority,

has made the following regulations:-

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

The title of these regulations is the Conformity Assessment Citation.

of Marine Equipment Regulations, 2009.

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

(1) The purpose of these regulations is to enhance safety Scope and

at sea and the prevention of marine pollution through the uniform commencement.

application of the relevant international instruments relating to

equipment listed in Schedules Ia and Ib to be placed on board ships

for which safety certificates are issued by or on behalf of Member

States pursuant to international conventions and to ensure the free

movement of such equipment within the Community.

(2) These regulations transpose the Conformity Assessment

Procedures of Council Directive 96/98/EC on Marine Equipment as

amended by Commission Directives 98/85/EC, 2001/53/EC, 2002/75/

EC, 2002/84/EC and 2008/67/EC of 30 June 2008.

(3) These regulations shall be deemed to have come into force

on the 21st July, 2009.

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

For the purposes of these regulations, the following Definitions.

definitions shall apply

"the Act" means the Product Safety Act;

"authorised representative" means any natural or legal person

established within the Community or Malta who has received a

written mandate from a manufacturer to act on his behalf in relation

to specified tasks;

"Community" means the European Community;

"Community ship" means a ship for which safety certificates are

issued by or on behalf of Member States or Malta under international

conventions. This definition does not include the issue of a certificate

by a Member State’s administration for a ship at the request of a third

country’s administration;

"conformity assessment procedures" mean the procedures as set

out in regulation 8 and in Schedule II;

"the “Directive” means Council Directive 96/98/EC on marine

equipment, as amended by the Directives mentioned in regulation

2(2);

"equipment" means items listed in Schedules Ia and Ib which

must be placed on board a ship for use in order to comply with

international instruments or are voluntarily placed on board for use,

and for which the approval of the flag State administration is required

according to international instruments;

"existing ship" means a ship which is not a new ship;

"importer" means any natural or legal person established within

the Community or Malta who places equipment from a third country

on the Community market;

"international conventions" mean

(a)

the 1966 International Convention on Load Lines

(LL66),

(b) the 1972 Convention on the International

Regulations for Preventing Collisions at Sea (COLREG),

(c)

the 1973 International Convention

for

the

Prevention of Pollution from Ships (MARPOL), and

(d) the 1974 International Convention for the Safety of

Life at Sea (SOLAS);

"international instruments" mean the relevant international

conventions, the relevant resolutions and circulars of the International

Maritime Organisation (IMO), and the relevant international testing

standards;

"making available on the market" means any supply of

equipment for distribution, consumption or use on the Community

market in the course of a commercial activity, whether in return for

payment or free of charge;

"manufacturer" means any natural or legal person who

manufactures equipment or has equipment designed or manufactured,

and markets that equipment under his name or trademark;

"mark" means the symbol referred to in regulation 6 and set out

in Schedule IV;

"Market Surveillance Directorate” means the Market

Surveillance Directorate of the Malta Standards Authority as

described in the Establishment of Directorates of the Malta Standards S.L. 419.03

Authority Order;

"new ship" shall have the same meaning as assigned to it by the

Merchant Shipping (Marine Equipment) Regulations;

"notified body” means an organisation designated by

Regulatory Affairs Directorate in accordance with regulation 7 and

with the Method for Designating Conformity Assessment Bodies S.L. 427.45

Regulations;

"placed on board" means installed or placed on board a ship;

"placing on the market" means the making available of a

product on the Community market for the first time;

"radiocommunications equipment” means equipment required

by Chapter IV of the 1974 International Convention for the Safety of

Life at Sea (SOLAS), in its updated version, and survival craft two-

way VHF radiotelephone apparatus required by regulation III/6.2.1 of

the same Convention;

"Registrar General" has the same meaning as is assigned to it by

article 2 of the Merchant Shipping Act;

"Regulatory Affairs Directorate" means the Regulatory Affairs

Directorate of the Malta Standards Authority as described in the

Establishment of Directorates of the Malta Standards Authority S.L. 419.03

Order;

"safety certificates" mean the certificates issued by or on behalf

of Member States in accordance with international conventions;

"ship" means a ship falling within the scope of international

conventions, but does not include warships;

"testing standards" mean the standards set by -

(a)

the International Maritime Organisation (IMO),

(b)

the International Organisation for Standardisation

(ISO),

(c)

the

International

Electrotechnical

Commission

(IEC),

(d)

the European Committee for Standardisation (CEN),

(e)

the European Committee for

Electrotechnical

Standardisation (CENELEC), and

(f)

the European

Telecommunication

Standards

Institute (ETSI),

in their updated version, and established in accordance with the

relevant international conventions and with the relevant IMO

resolutions and circulars to define testing methods and test results,

but only in the form referred to in Schedules Ia and Ib;

"type-approval" means the procedures for evaluating equipment

produced in accordance with the appropriate testing standards and the

issue of the appropriate certificate.

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

(1)

These regulations apply to equipment for use on

board -

(a)

a new Community ship whether or not the ship is

situated within the Community or Malta at the time of

construction;

(b)

an existing Community ship -

(i) where such equipment was not previously

carried on board, or

(ii) where equipment which was previously

carried on board the ship is replaced, except where

international conventions permit otherwise,

whether or not the ship is situated within the Community when

the equipment is placed on board.

(2) These regulations shall not apply to equipment which on

the date of the entry into force of these regulations has already been

placed on board a ship.

(3) Notwithstanding the fact that the equipment referred to in

sub-regulation (1) may fall within the scope of regulations other than

these regulations for the purpose of free movement, and in particular

the Electromagnetic Compatibility Regulations, and the Personal S.L. 427.35

Protective Equipment Regulations, that equipment shall be subject

only to these regulations, to the exclusion of all others for those

purposes.

(4) Equipment on board ships for which a safety certificate is

being issued or renewed must comply with the requirements of these

regulations.

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

(1) Equipment listed in Schedule Ia that is placed on General

board a Community ship on or after 1 January 1999 shall meet the requirements.

applicable requirements of the international instruments referred to in

that Schedule.

(2) The compliance of equipment with the applicable

requirements of the international conventions and of the relevant

resolutions and circulars of the International Maritime Organisation

shall be demonstrated solely in accordance with the relevant testing

standards and the conformity assessment procedures referred to in

Schedule Ia

Provided that as regards items listed in Schedule Ia, where

both IEC and ETSI testing standards are given, those standards shall

be alternatives and a manufacturer or his authorised representative

may determine which of them is to be used.

(3) Equipment listed in Schedule Ia and manufactured before 1

January 1999 may also be placed on the market and on board a

Community ship the certificates of which were issued by or on behalf

of a Member State or Malta in accordance with international

conventions until 1 January 2001 if it was manufactured in

accordance with procedures for type-approval already in force within

the territory of that Member State or Malta before 1 January 1999.

(4) The placing on the market or the placing on board a

Community ship of equipment referred to in Schedule Ia, which bears

the mark or, for other reasons, complies with these regulations, shall

not be prohibited. The issuing or renewal of safety certificates

relating thereto shall not be refused.

(5) Notwithstanding the provisions of sub-regulation (4),

measures may be taken as necessary by the Market Surveillance

Directorate to ensure that sample checks are carried out on equipment

bearing the mark which is on the market and which has not yet been

placed on board, in order to ensure that it complies with these

regulations. Sample checks which are not provided for in the modules

for conformity assessment in Schedule II shall be carried out at the

expense of the Market Surveillance Directorate.

(6) The Regulatory Affairs and Market Surveillance

Directorates shall offer assistance to other Member States with a view

to the effective implementation and enforcement of these regulations.

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

(1) Equipment referred to in Schedule Ia, which

complies with the relevant international instruments and is

manufactured in accordance with the conformity assessment

procedures of regulation 8, shall have the mark affixed to it by the

manufacturer or his authorised representative.

(2) The mark shall be followed by the identification number of

the notified body which has performed the conformity assessment

procedure, if that body is involved in the production control phase,

and by the last two digits of the number of the year in which the mark

is affixed. The identification number of the notified body shall be

affixed under its responsibility either by the body itself or by the

manufacturer or his authorised representative.

(3) The form of the mark to be used shall be as set out in

Schedule IV.

(4) The mark shall be affixed to the equipment or to its data

plate so as to be visible, legible and indelible throughout the

anticipated useful life of the equipment. However, where that is not

possible or not warranted on account of the nature of the piece of

equipment, it shall be affixed to the packaging of the product, to a

label or to a leaflet.

(5) No marks or inscriptions which are likely to mislead third

parties with regard to the meaning or the graphics of the mark

referred to in these regulations shall be affixed.

(6) The mark shall be affixed at the end of the production

phase.

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

(1) The Regulatory Affairs Directorate shall notify the

Commission and the other Member States of the bodies which it has

designated to carry out the procedures set out in regulation 8, together

with the specific tasks which those notified bodies have been

designated to carry out and the identification numbers assigned to

them beforehand by the Commission. Each organisation shall submit

to the Regulatory Affairs Directorate complete information

concerning, and evidence of, compliance with the criteria laid down

in Schedule III.

(2) The conditions for the recognition of competence and the

subsequent approval of notified bodies in the Method for Designating S.L. 427.45

Conformity Assessment Bodies Regulations shall also apply.

(3) At least once every two years, the Regulatory Affairs

Directorate shall cause an audit of the duties its notified bodies are

undertaking on its behalf to be carried out by the administration or by

an impartial external organisation appointed by the administration.

That audit shall ensure that each notified body continues to comply

with the criteria laid down in Schedule III.

(4) The designation of a body shall be withdrawn if the

Regulatory Affairs Directorate finds that the body no longer complies

with the criteria laid down in Schedule III. It shall immediately

inform the Commission and the other Member States accordingly.

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

(1) The conformity assessment procedures, the details Conformity

assessment

of which are listed in Schedule II, shall be

procedures.

(a)

EC Type-examination (module B) and, before

equipment is placed on the market and according to the choice

made by the manufacturer or his authorised representative from

the possibilities indicated in Schedule Ia, all equipment shall be

subject to

(i) the EC declaration of conformity to type

(module C);

(ii) the EC declaration of conformity to type

(production-quality assurance) (module D);

(iii) the EC declaration of conformity to type

(product quality assurance) (module E);

(iv) the EC declaration of conformity to type

(product verification) (module F); or

(b)

EC full quality assurance (module H).

(2) The declaration of conformity to type shall be in written

form and shall give the information specific in Schedule II.

(3) Where sets of equipment are produced individually or in

small quantities and not in series or in mass, the conformity

assessment procedure may be the EC unit verification (module G).

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

(1) Where it is

ascertained

by inspection, Removal from

communication from the Registrar General, or otherwise that, the market.

notwithstanding the fact that it bears the mark, a piece of equipment

referred to in Schedule Ia, when correctly installed, maintained and

used for its intended purpose, may compromise the health or safety of

the crew, the passengers or, where applicable, other persons, or

adversely affect the marine environment, the Market Surveillance

Directorate shall, following consultation with the Registrar General,

take all appropriate interim measures to withdraw that piece of

equipment from the market or prohibit or restrict its being placed on

the market or being used on board a ship.

(2) The Regulatory Affairs Directorate shall immediately

inform the other Member States and the Commission of that measure

and indicate the reasons for such decision and, in particular, whether

non-compliance with these regulations is due to

(a)

failure to comply with regulation 5(1) and (2);

(b) incorrect application of the testing standards

referred to in regulation 5(2); or

(c)

shortcomings in the testing standards themselves.

(3) Where a non-complying piece of equipment bears the

mark, the Market Surveillance Directorate shall take the appropriate

measures against whomsoever affixed the mark. The Regulatory

Affairs Directorate shall inform the Commission and the other

Member States of the measures taken.

(4) Where equipment listed as "new item" under the heading

"item designation" of Schedule Ia or as having been transferred from

Schedule Ib to Schedule Ia was manufactured before 21 July 2009 in

accordance with the procedures for type-approval already in force

before that date within the Community, such equipment may be

placed on the market and on board a Community ship until 21 July

2011.

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

The penalties applicable for the infringement of any of the

provisions of these regulations shall be those provided for in article

32 of the Act.

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

The Conformity Assessment of Marine Equipment

Regulations, 2005, are hereby revoked.

Schedule I

(Based on Annex A of Directive 96/98/EC)

List of acronyms used

Circ., Circular.

CENELEC, European Committee for Electro-technical Standardization.

COLREG, International Regulations for Preventing Collisions at Sea.

COMSAR, IMO’s Sub-Committee on Radiocommunications and Search and

Rescue.

EN, European Standard.

ETSI, European Telecommunications Standards Institute.

FSS, International Code for Fire Safety Systems.

FTP, International Code for Application of Fire Test Procedures.

HSC, High Speed Craft Code.

ICAO, International Civil Aviation Organization.

IEC, International Electrotechnical Commission.

IMO, International Maritime Organization.

ISO, International Standardisation Organization.

ITU, International Telecommunication Union.

LSA, Life saving appliance.

MARPOL, International Convention for the Prevention of Pollution from

Ships.

MEPC, Marine Environment Protection Committee.

MSC, Maritime Safety Committee.

SOLAS, International Convention for the Safety of Life at Sea.

Reg., Regulation.

Res., Resolution.

Schedule Ia

(Based on Annex A.1 of Directive 96/98/EC)

[Regulations 2(1), 3, 5(1), (2) and (3), 6(1), 8(1)(a), 9(1) and (4)]

Equipment for which detailed testing standards already exist

in International Instruments

Notes applicable to the whole of Schedule Ia

1. General: in addition to the testing standards specifically mentioned, a

number of provisions, which must be checked during type-examination (type

approval) as referred to in the modules for conformity assessment in Schedule II,

are to be found in the applicable requirements of the international conventions and

the relevant resolutions and circulars of the IMO.

2. Column 5: Where IMO Resolutions are cited, only the testing standards

contained in relevant parts of the Annexes to the Resolutions are applicable and

exclude the provisions of the Resolutions themselves.

3. Column 5: International conventions and testing standards apply in their

up-to-date version. For the purpose of identifying correctly the relevant standards,

test reports, certificates of conformity and declarations of conformity shall identify

the specific testing standard applied and its version.

4. Column 5: Where two sets of identifying standards are separated by

"or", each set fulfils all the testing requirements to meet IMO Performance

Standards; thus testing to one of these sets is sufficient to demonstrate compliance

with the requirements of the relevant International Instruments. Conversely, when

other separators (comma) are used all the listed references apply.

5. Column 6: Where module H appears, module H plus design

examination certificate is to be understood.

6. The requirements laid down in this Schedule shall be without prejudice

to carriage requirements in the international conventions.

1. Life-saving appliances

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/1.1 Lifebuoys

- Reg. III/4,

- Reg. III/7,

- IMO Res.

B + D

- Reg. X/3.

- Reg. III/34,

MSC.81(70).

B + E

- IMO Res. MSC.36 (63) -

B + F

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

LSA Code) I, II,

- IMO Res. MSC.97(73) -

2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/1.2 Position-

- Reg. II/4,

- Reg. III/7,

- IMO Res.

B + D

indicating

- Reg. X/3.

- Reg. III/22,

MSC.81(70).

B + E

lights for life-

- Reg. III/26,

(Except for battery

B + F

saving

- Reg. III/32,

requirements as

appliances

- Reg. III/34,

specified in EN

(a) for

- IMO Res. MSC.36(63) -

394:1993 which only

survival craft

(1994 HSC Code) 8,

apply to lifejacket

and rescue

- IMO Res. MSC.48(66) -

lights)

boats,

(LSA Code) II, IV,

(b) for

- IMO Res. MSC.97(73) -

lifebuoys,

(2000 HSC Code) 8,

(c) for

- IMO MSC/Circ. 885,

lifejackets.

- IMO MSC/Circ. 980.

A.1/1.3 Lifebuoys

- Reg. III/4,

- Reg. III/7,

- IMO Res.

B + D

self-activating

- Reg. X/3.

- Reg. III/34,

MSC.81(70).

B + E

smoke signals

- IMO Res. MSC.36 (63) -

B + F

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, II,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/1.4 Lifejackets

- Reg. III/4,

- Reg. III/7,

- IMO Res.

B + D

- Reg. X/3.

- Reg. III/22,

MSC.81(70).

B + E

- Reg. III/34,

(Except for battery

B + F

- IMO Res. MSC.36(63) -

requirements as

(1994 HSC Code) 8,

specified in EN

- IMO Res. MSC.48(66) -

394:1993 which only

(LSA Code) I, II,

apply to lifejacket

- IMO Res. MSC.97(73) -

lights)

(2000 HSC Code) 8,

- IMO MSC/Circ. 922,

- IMO MSC/Circ. 980.

1. Life-saving appliances

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/1.5 Immersion

- Reg. III/4,

- Reg. III/7,

- IMO Res.

B + D

suits and anti-

- Reg. X/3.

- Reg. III/22,

MSC.81(70),

B + E

exposure suits

- Reg. III/32,

- EN ISO 15027 -

B + F

not classified

- Reg. III/34,

3:2002.

as lifejackets

- IMO Res. MSC.36(63) -

insulated or

(1994 HSC Code) 8,

not insulated

- IMO Res. MSC.48(66) -

(LSA Code) I, II,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/1.6 Immersion

- Reg. III/4,

- Reg. III/7,

- IMO Res.

B + D

suits and anti- - Reg. X/3.

- Reg. III/22,

MSC.81(70),

B + E

exposure suits

- Reg. III/32,

- EN ISO 15027 -

B + F

classified as

- Reg. III/34,

3:2002.

lifejackets

- IMO Res. MSC.36(63) -

insulated or

(1994 HSC Code) 8,

not insulated

- IMO Res. MSC.48(66) -

(LSA Code) I, II,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.l/1.7 Thermal

- Reg. III/4,

- Reg. III/22,

- IMO Res.

B + D

protective aids - Reg. X/3.

- Reg. III/32,

MSC.81(70).

B + E

- Reg. III/34,

B + F

- IMO Res. MSC.36(63) -

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, II,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/1.8 Rocket

- Reg. III/4,

- Reg. III/6,

- IMO Res.

B + D

parachute

- Reg. X/3.

- Reg. III/34,

MSC.81(70).

B + E

flares

- IMO Res. MSC.36(63) -

B + F

(pyrotechnics)

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, III,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

1. Life-saving appliances

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/1.9 Hand flares

- Reg. III/4,

- Reg. III/34,

- IMO Res.

B + D

(pyrotechnics)

- Reg. X/3.

- IMO Res. MSC.36(63) -

MSC.81(70).

B + E

(1994 HSC Code) 8,

B + F

- IMO Res. MSC.48(66) -

(LSA Code) I, III,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Buoyant

- Reg. III/4,

- Reg. III/34,

- IMO Res.

B + D

1.10

smoke signals

- Reg. X/3.

- IMO Res. MSC.48(66) -

MSC.81(70).

B + E

(pyrotechnics)

(LSA Code) I, III,

B + F

- IMO MSC/Circ. 980.

A.1/

Line-throwing - Reg. III/4,

- Reg. III/18,

- IMO Res.

B + D

1.11

appliances

- Reg. X/3.

- Reg. III/34,

MSC.81(70).

B + E

- IMO Res. MSC.36(63) -

B + F

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, VII,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Inflatable

- Reg. III/4,

- Reg. III/13,

- IMO Res.

B + D

1.12

liferafts

- Reg. X/3.

- Reg. III/21,

MSC.81(70).

B + E

- Reg. III/26,

B + F

- Reg. III/31,

- Reg. III/34,

- IMO Res. MSC.36(63) -

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, IV,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 811,

- IMO MSC/Circ. 980.

A.1/

Rigid liferafts

- Reg. III/4,

- Reg. III/21,

- IMO Res.

B + D

1.13

- Reg. X/3.

- Reg. III/26,

MSC.81(70),

B + E

- Reg. III/31,

- IMO MSC/

B + F

- Reg. III/34,

Circ.1006.

- IMO Res. MSC.36(63) -

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, IV,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 811,

- IMO MSC/Circ. 980.

1. Life-saving appliances

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Automatically

- Reg. III/4,

- Reg. III/26,

- IMO Res.

B + D

1.14

self-righting

- Reg. X/3.

- Reg. III/34,

MSC.81(70),

B + E

liferafts

- IMO Res. MSC.36(63) -

- IMO MSC/Circ.809

B + F

(1994 HSC Code) 8,

including Add.1,

- IMO Res. MSC.48(66) -

- IMO MSC/

(LSA Code) I, IV,

Circ.1006.

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ.809

including Add.1,

- IMO MSC/Circ. 811,

- IMO MSC/Circ. 980.

A.1/

Canopied

- Reg. III/4,

- Reg. III/26,

- IMO Res.

B + D

1.15

reversible life

- Reg. X/3.

- Reg. III/34,

MSC.81(70),

B + E

rafts

- IMO Res. MSC.36(63) -

- IMO MSC/Circ.809

B + F

(1994 HSC Code) 8, Annex

including Add.1,

10,

- IMO MSC/

- IMO Res. MSC.48(66) -

Circ.1006.

(LSA Code) I, IV,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8, Annex

11,

- IMO MSC/Circ.809

including Add.1,

- IMO MSC/Circ. 811,

- IMO MSC/Circ. 980.

A.1/

Float-free

- Reg. III/4,

- Reg. III/13,

- IMO Res.

B + D

1.16

arrangements

- Reg. X/3.

- Reg. III/26,

MSC.81(70).

B + E

for liferafts

- Reg. III/34,

B + F

(hydrostatic

- IMO Res. MSC.36(63) -

release units)

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, IV,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 811,

- IMO MSC/Circ. 980.

1. Life-saving appliances

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Lifeboats

- Reg. III/4,

- Reg. III/21,

- IMO Res.

B + D

1.17

- Reg. X/3.

- Reg. III/31,

MSC.81(70),

B + F

- Reg. III/34,

- IMO MSC/

G

- IMO Res. MSC.36(63) -

Circ.1006.

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, IV,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Rigid rescue

- Reg. III/4,

- Reg. III/21,

- IMO Res.

B + D

1.18

boats

- Reg. X/3.

- Reg. III/31,

MSC.81(70),

B + F

- Reg. III/34,

- IMO MSC/

G

- IMO Res. MSC.36(63) -

Circ.1006.

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, V,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Inflated

- Reg. III/4,

- Reg. III/21,

- IMO Res.

B + D

1.19

rescue boats

- Reg. X/3.

- Reg. III/31,

MSC.81(70),

B + F

- Reg. III/34,

- ISO 15372:2000.

G

- IMO Res. MSC.36(63) -

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, V,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Fast rescue

- Reg. III/4.

- Reg. III/26,

- IMO Res.

B + D

1.20

boats

- Reg. III/34,

MSC.81(70),

B + F

- IMO Res. MSC.48(66) -

- IMO MSC/

G

(LSA Code) I, V,

Circ.1006,

- IMO MSC/Circ.809

- ISO 15372:2000

including Add.1,

- IMO MSC/Circ. 980.

- IMO MSC/Circ. 1016,

- IMO MSC/CIRC. 1094.

1. Life-saving appliances

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Launching

- Reg. III/4,

- Reg. III/23,

- IMO Res.

B + D

1.21

appliances

- Reg. X/3.

- Reg. III/33,

MSC.81(70).

B + E

using falls

- Reg. III/34,

B + F

(davits)

- IMO Res. MSC.36(63) -

G

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, VI,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Float-free

Moved to A.2/1.3

1.22

launching

appliances for

survival craft

A.1/

Launching

- Reg. III/4,

- Reg. III/16,

- IMO Res.

B + D

1.23

appliances for

- Reg. X/3.

- Reg. III/23,

MSC.81(70).

B + E

free-fall

- Reg. III/33,

B + F

lifeboats

- Reg. III/34,

G

- IMO Res. MSC.36(63) -

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, VI,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Liferaft

- Reg. III/4,

- Reg. III/12,

- IMO Res.

B + D

1.24

launching

- Reg. X/3.

- Reg. III/16,

MSC.81(70).

B + E

appliances

- Reg. III/34,

B + F

(Davits)

- IMO Res. MSC.36(63) -

G

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, VI,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Fast rescue

- Reg. III/4.

- Reg. III/26,

- IMO Res.

B + D

1.25

boat

- Reg. III/34,

MSC.81(70).

B + E

launching

- IMO Res. MSC.48(66) -

B + F

appliances

(LSA Code) I, VI,

G

(Davits)

- IMO MSC/Circ.809

including Add.1,

- IMO MSC/Circ. 980.

1. Life-saving appliances

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Release

- Reg. III/4,

- Reg. III/16,

- IMO Res.

B + D

1.26

mechanism

- Reg. X/3.

- Reg. III/34,

MSC.81(70).

B + E

for

- IMO Res. MSC.36(63) -

B + F

(a) Lifeboats

(1994 HSC Code) 8,

and rescue

- IMO Res. MSC.48(66) -

boats and

(LSA Code) I, IV, VI,

(b) Liferafts,

- IMO Res. MSC.97(73) -

Launched by a

(2000 HSC Code) 8,

fall or falls

- IMO MSC/Circ. 980.

A.1/

Marine

- Reg. III/4,

- Reg. III/15,

- IMO Res.

B + D

1.27

evacuation

- Reg. X/3.

- Reg. III/26,

MSC.81(70).

B + F

systems

- Reg. III/34,

G

- IMO Res. MSC.36(63) -

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, VI,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Means of

- Reg. III/4,

- Reg. III/26,

- IMO Res.

B + D

1.28

rescue

- Reg. X/3.

- Reg. III/34,

MSC.81(70),

B + F

- IMO Res. MSC.36(63) -

- IMO MSC/

(1994 HSC Code) 8,

Circ.810.

- IMO Res. MSC.48(66) -

(LSA Code) I, VI,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Embarkation

Moved to A.2/1.4

1.29

ladders

A.1/

Retro-

- Reg. III/4,

- Reg. III/34,

- IMO Res.

B + D

1.30

reflective

- Reg. X/3.

- IMO Res. MSC.36(63) -

A.658(16).

B + E

materials

(1994 HSC Code) 8,

B + F

- IMO Res. MSC.48(66) -

(LSA Code) I,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Survival craft

Moved to A.1/5.17 and A.1/5.18

1.31

two-way VHF

radio

telephone

apparatus

A.1/

9GHz SAR

Moved to A.1/4.18

1.32

transponder

(SART)

1. Life-saving appliances

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Radar

- Reg. III/4,

- Reg. III/34,

- EN ISO 8729:1998

B + D

1.33

reflector for

- Reg. X/3.

- IMO Res. MSC.36(63) -

B + E

lifeboats and

(1994 HSC Code) 8,

B + F

rescue boats

- IMO Res. MSC.48(66) -

G

(LSA Code) I, IV, V,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO Res. MSC.164(78),

- IMO MSC/Circ. 980.

A.1/

Compass for

Moved to A.1/4.23

1.34

lifeboats and

rescue boats

A.1/

Portable fire-

Moved to A.1/3.38

1.35

extinguishing

equipment for

lifeboats and

rescue boats

A.1/

Lifeboat/

- Reg. III/4,

- Reg. III/34,

- IMO Res.

B + D

1.36

rescue boat

- Reg. X/3.

- IMO Res. MSC.48(66) -

MSC.81(70).

B + E

propulsion

(LSA Code) IV, V.

B + F

engine

A.1/

Rescue boat

- Reg. III/4,

- Reg. III/34,

- IMO Res.

B + D

1.37

propulsion

- Reg. X/3.

- IMO Res. MSC.48(66) -

MSC.81(70).

B + E

engine-

(LSA Code) V.

B + F

outboard

motor

A.1/

Searchlights

- Reg. III/4,

- Reg. III/34,

- IMO Res.

B + D

1.38

for use in

- Reg. X/3.

- IMO Res. MSC.36(63) -

MSC.81(70).

B + E

Lifeboats and

(1994 HSC Code) 8,

B + F

Rescue Boats

- IMO Res. MSC.48(66) -

(LSA Code) I, IV, V,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ. 980.

A.1/

Open

- Reg. III/4,

- IMO Res. MSC.36(63) -

- IMO Res.

B + D

1.39

reversible

- Reg. X/3.

(1994 HSC Code) 8, Annex

MSC.36(63) - (1994

B + F

liferafts

10,

HSC Code) Annex

- IMO Res. MSC.48(66) -

10,

(LSA Code) I,

- IMO Res.

- IMO Res. MSC.97(73) -

MSC.97(73) – (2000

(2000 HSC Code) 8, Annex

HSC Code) Annex

11,

11. - IMO MSC/Circ. 980.

1. Life-saving appliances

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Mechanical

- Reg. V/23.

- Reg. V/23,

- ISO 799:2004

B + D

1.40

pilot hoist

- IMO Res. A.889(21),

B + E

- IMO MSC/Circ.773,

B + F

- IMO MSC/Circ.980.

A.1/

Winches for

- Reg. III/4,

- Reg. III/16,

- IMO Res.

B + D

1.41

survival craft

- Reg. X/3.

- Reg. III/17,

MSC.48(66) - (LSA

B + E

(New

and rescue

- Reg. III/23

Code),

B + F

item)

boats

- Reg. III/24,

- IMO Res.

G

- Reg. III/34,

MSC.81(70).

- IMO Res. MSC.36(63) -

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, VI,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

A.1/

Pilot ladder

- Reg. V/23,

- Reg. V/23,

- IMO Res.

B + D

1.42

- Reg. X/3.

- IMO Res. A.889(21),

A.889(21).

B + E

(New

- IMO MSC/Circ.528/rev.1.

B + F

item)

G

2. Marine pollution prevention

Regulation

Regulations of Marpol 73/78

Marpol 73/78

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/2.1 Oil-filtering

- Annex I,

- Annex I, Reg. 16(1),

- IMO Res.

B + D

equipment

Reg. 16(4),

- Annex I, Reg. 16(2),

MEPC.60(33),

B + E

(for an oil

- Annex I,

- Revised Annex I Reg.

- IMO Res.

B + F

content of the

Reg. 16(5),

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

1,

MEPC.107(49).

effluent not

- Revised

- Revised Annex I Reg.

exceeding 15

Annex I, Reg.

14.2,

p.p.m.)

14.6,

- Revised Annex I Reg.

- Revised

14.3.

Annex I, Reg.

14.7.

A.1/2.2 Oil/water

- Annex I,

- Annex I, Reg. 15(3)(b),

- IMO Res.

B + D

interface

Reg. 15(3)(b),

- Revised Annex I, Reg. 32.

MEPC.5(XIII).

B + E

detectors

- Revised

B + F

Annex I, Reg.

Malta Government Gazette — Legal Notice 2009 241 — Conformity Assessment of Marine Equipment Regulations, 2009

2. Marine pollution prevention

Regulation

Regulations of Marpol 73/78

Marpol 73/78

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/2.3 Oil-content

- Annex I,

- Annex I, Reg. 16(1) and

- IMO Res.

B + D

meters

Reg. 16(5),

(2),

MEPC.60(33),

B + E

- Revised

- Revised Annex I Reg. 14.1

- IMO Res.

B + F

Annex I, Reg.

and 14.2.

MEPC.107(49).

14.7,

- Revised

Annex I, Reg.

14.7.

A.1/2.4 Process units

Item deleted

intended for

attachment to

existing oily

water

separating

equipment

(for an oil

content of the

effluent not

exceeding 15

p.p.m.)

A.1/2.5 Oil discharge

- Annex I, Reg. - Annex I, Reg. 15(3),

- IMO Res.

B + D

monitoring

15(3)(a),

- Revised Annex I, Reg. 31.2, MEPC.108(49).

B + E

and control

- Revised

- Revised Annex I, Reg. 31.3,

B + F

system for an

Annex I, Reg. - Revised Annex I, Reg. 31.4.

oil tanker

31.2,

- Revised

Annex I, Reg.

31.3.

A.1/2.6 Sewage

- Annex IV,

- Revised Annex IV, Reg. 9. - IMO Res.

B + D

systems

Reg. 9.

MEPC.2(VI)

B + E

B + F

A.1/2.7 Shipboard

- Annex VI,

- Annex VI, Reg. 16(2)(a),

- IMO Res.

B + D

incinerators

Reg. 16(2)(a),

- Annex VI, Reg. 16.

MEPC.76(40).

B + E

- Annex VI,

B + F

Reg. 16.

G

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/3.1 Primary decks

- Reg. II-2/4,

- Reg. II-2/4,

- IMO Res.

B + D

covering

- Reg. II-2/6,

- Reg. II-2/6,

A.653(16),

- Reg. X/3.

- IMO Res. MSC.36(63) -

- IMO Res.

(1994 HSC Code) 7,

A.687(17),

- IMO Res. MSC.97(73) -

- IMO Res.

(2000 HSC Code) 7.

MSC.61(67) -(FTP

Code),

- IMO MSC/Circ.916,

- IMO MSC/

Circ.1004.

A.1/3.2 Portable fire

- Reg. II-2/10,

- Reg. II-2/10,

- EN 3-3:1994,

B + D

extinguishers

- Reg. X/3,

- Reg. II-2/19,

- EN 3-6:1995

B + E

- IMO Res.

- Reg. II-2/20,

including A.1:1999,

B + F

MSC.98(73) -

- IMO Res. A.951(23),

- EN 3-7:2004.

(FSS Code) 4.

- IMO Res. MSC.36(63) -

(1994 HSC Code) 7,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 7,

- IMO Res. MSC.98(73) -

(FSS Code) 4.

A.1/3.3 Fire-fighter's

- Reg. II-2/10,

- Reg. II-2/10,

- EN 469:2006,

B + D

outfit

- Reg. X/3,

-IMO Res. MSC.36(63) -

- EN 531:1995,

B + E

protective

- IMO Res.

(1994 HSC Code) 7,

- EN 531/A1:1998,

B + F

clothing (close

MSC.98(73) -

- IMO Res. MSC.97(73) -

- EN 1486:1996.

proximity

(FSS Code) 3.

(2000 HSC Code) 7,

Or

clothing)

- IMO Res. MSC.98(73) -

- ISO 15538:2001.

(FSS Code) 3.

A.1/3.4 Firefighter's

- Reg. II-2/10,

- Reg. II-2/10,

- EN ISO 20344:2004, B + D

outfit: boots

- Reg. X/3,

- IMO Res. MSC.36(63) -

- EN ISO 20345:2004. B + E

- IMO Res.

(1994 HSC Code) 7,

B + F

MSC.98(73) –

- IMO Res. MSC.97(73) -

(FSS Code) 3.

(2000 HSC Code) 7,

- IMO Res. MSC.98(73) –

(FSS Code) 3.

A.1/3.5 Firefighter's

- Reg. II-2/10,

- Reg. II-2/10,

- EN 659:2003,

B + D

outfit: gloves

- Reg. X/3,

- IMO Res. MSC.36(63) -

- EN 60903:2002 (for

B + E

- IMO Res.

(1994 HSC Code) 7,

conductivity only).

B + F

MSC.98(73) -

- IMO Res. MSC.97(73) -

(FSS Code) 3.

(2000 HSC Code) 7,

- IMO Res. MSC.98(73) -

(FSS Code) 3.

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/3.6 Firefighter's

- Reg. II-2/10,

- Reg. II-2/10,

- EN 443:1997.

B + D

outfit: helmet

- Reg. X/3,

- IMO Res. MSC.36(63) -

B + E

- IMO Res.

(1994 HSC Code) 7,

B + F

MSC.98(73) -

- IMO Res. MSC.97(73) -

(FSS Code) 3.

(2000 HSC Code) 7,

- IMO Res. MSC.98(73) -

(FSS Code) 3.

A.1/3.7 Self-contained

- Reg. II-2/10,

- Reg. II-2/10,

- EN 136:1998,

B + D

compressed-

- Reg. X/3,

- IMO Res. MSC.36(63) -

- EN 137:2007.

B + E

air-operated

- IMO Res.

(1994 HSC Code) 7,

B + F

breathing

MSC.98(73) -

- IMO Res. MSC.97(73) -

apparatus

(FSS Code) 3.

(2000 HSC Code) 7,

- IMO Res. MSC.98(73) -

Note: For use

(FSS Code) 3.

in accidents

involving

dangerous

goods a

positive

pressure type

mask is

required.

A.1/3.8 Air-supplied

- Reg. X/3.

- IMO Res. MSC.36(63) -

- EN 14593-1:2005,

B + D

breathing

(1994 HSC Code) 7,

- EN 14593-2:2005,

B + E

apparatus for Note: This item

- IMO Res. MSC.97(73) -

- EN 14594:2005.

B + F

use with a

is not included

(2000 HSC Code) 7,

smoke helmet in new Chapter

or smoke mask II-2

Regulations

Note: For use [IMO Res.

in accidents

MSC.99(73)]

involving

or FSS Code

dangerous

[IMO Res.

goods a

MSC.98(73)].

positive

pressure type

mask is

required.

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/3.9 Sprinkler

- Reg. II-2/7,

- Reg. II-2/7,

- IMO Res.

B + D

systems

- Reg. II-2/10,

- Reg. II-2/9,

A.800(19).

B + E

components

- IMO Res.

- Reg. II-2/10,

B + F

for

MSC.98(73) -

- IMO Res. MSC.98(73) -

G

accommoda-

(FSS Code) 8.

(FSS Code) 8.

tion spaces,

service spaces

and control

stations

equivalent to

that referred to

in SOLAS 74

Regulation II-

2/12 (limited

to nozzles and

their

performance).

A.1/

Nozzles for

Moved to A.2/3.11

3.10

fixed pressure

water spraying

fire

extinguishing

systems for

machinery

spaces

A.1/

'A' and 'B'

‘A’ Class

- Reg. II-2/9, and,

- IMO Res.

B + D

3.11

Class

- Reg. II-2/3.2.

‘A’ Class

MSC.61(67) - (FTP

B + E

divisions, fire

‘B’ Class

- Reg. II-2/3.2.

Code),

B + F

integrity

- Reg. II-2/3.4.

‘B’ Class

- IMO MSC/

(a) 'A' class

- Reg. II-2/3.4.

Circ.1120.

divisions,

(b) 'B' class

divisions.

A.1/

Devices to

- Reg. II-2/4,

- Reg. II-2/4,

- EN 21874:2001,

B + F

3.12

prevent the

- Reg. II-2/16.

- Reg. II-2/16.

- ISO 15364:2000,

passage of

- MO MSC/Circ.677,

flame into the

- IMO MSC/

cargo tanks in

Circ.1009.

tankers

A.1/

Non-

- Reg. II-2/10,

- Reg. II-2/3,

- IMO Res.

B + D

3.13

combustible

- Reg. X/3.

- Reg. II-2/5,

MSC.61(67) - (FTP

B + E

materials

- IMO Res. MSC.36(63) -

Code),

B + F

(1994 HSC Code) 7,

- IMO MSC/

- IMO Res. MSC.98(73) -

Circ.1120.

(FSS Code) 7.

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Materials other

- Reg. II-2/9.

- Reg. II-2/9.

- IMO Res.

B + D

3.14

than steel for

A.754(18),

B + E

pipes

- IMO Res.

B + F

penetrating 'A'

MSC.61(67) - (FTP

or 'B' Class

Code),

division

- IMO MSC/

Circ.1120.

A.1/

Materials other

- Reg. II-2/4,

- Reg. II-2/4,

- IMO Res.

B + D

3.15

than steel for

- Reg. X/3.

- IMO Res. MSC.36(63) -

A.753(18),

B + E

pipes

(1994 HSC Code) 7, 10,

- ISO 15540:1999,

B + F

conveying oil

- IMO Res. MSC.97(73) -

- ISO 15541:1999.

or fuel oil

(2000 HSC Code) 7, 10.

(a) pipes and

fittings (b)

valves

(c) flexible

pipe

assemblies

A.1/

Fire doors

- Reg. II-2/9.

- Reg. II-2/9.

- IMO Res.

B + D

3.16

MSC.61(67) - (FTP

B + E

Code),

B + F

- IMO MSC/

G

Circ.1120.

A.1/

Fire door

- Reg. II-2/9,

- Reg. II-2/9,

- IMO Res.

B + D

3.17

control

- Reg. X/3.

- IMO Res. MSC.36(63) -

MSC.61(67) - (FTP

B + E

systems

(1994 HSC Code) 7,

Code).

B + F

components

- IMO Res. MSC.97(73) -

(2000 HSC Code) 7.

Note: When

the term

‘system

components’ is

used in column

2 it may be

that a single

component, a

group of

components or

a whole

system needs

to be tested to

ensure that the

international

requirements

are fulfilled.

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Surface

- Reg. II-2/3,

- Reg. II-2/3,

- IMO Res.

B + D

3.18

materials and

- Reg. II-2/5,

- Reg. II-2/5,

MSC.61(67) - (FTP

B + E

floor coverings

- Reg. II-2/6,

- Reg. II-2/6,

Code),

B + F

with low

- Reg. II-2/9,

- Reg. II-2/9,

- IMO MSC/Circ.916,

flame-spread

- Reg. X/3.

- IMO Res. MSC.36(63) -

- IMO MSC/

characteristics

(1994 HSC Code) 7,

Circ.1004,

(a) decorative

- IMO Res. MSC.97(73) -

- IMO MSC/

veneers,

(2000 HSC Code) 7.

Circ.1036,

(b) paint

- IMO MSC/

systems,

Circ.1120,

(c) floor

- ISO 1716:2002.

coverings,

(d) pipe

Note: Where the

insulation

surface material is

covers,

required to have a

(e) adhesives

certain maximum

used in the

calorific value, this

construction of

shall be measured in

‘B’ and ‘C’

accordance with ISO

class divisions,

1716. (f)

combustible

ducts.

A.1/

Draperies,

- Reg. II-2/3,

- Reg. II-2/3,

- IMO Res.

B + D

3.19

curtains and

- Reg. II-2/9,

- Reg. II-2/9,

MSC.61(67) - (FTP

B + E

other

- Reg. X/3.

- IMO Res. MSC.36(63) -

Code).

B + F

suspended

(1994 HSC Code) 7,

textile

- IMO Res. MSC.97(73) -

materials and

(2000 HSC Code) 7.

films

(The

designation is

with regard to

SOLAS

requirements).

A.1/

Upholstered

- Reg. II-2/3,

- Reg. II-2/3,

- - IMO Res.

B + D

3.20

furniture

- Reg. II-2/5,

- Reg. II-2/5,

MSC.61(67) - (FTP

B + E

- Reg. II-2/9,

- Reg. II-2/9,

Code).

B + F

(The

- Reg. X/3.

- IMO Res. MSC.36(63) -

designation is

(1994 HSC Code) 7,

with regard to

- IMO Res. MSC.97(73) -

SOLAS

(2000 HSC Code) 7.

requirements).

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Bedding

- Reg. II-2/3,

- Reg. II-2/3,

- IMO Res.

B + D

3.21

components

- Reg. II-2/9,

- Reg. II-2/9,

MSC.61(67) - (FTP

B + E

- Reg. X/3.

- IMO Res. MSC.36(63) -

Code).

B + F

(The

(1994 HSC Code) 7,

designation is

- IMO Res. MSC.97(73) -

with regard to

(2000 HSC Code) 7.

SOLAS

requirements).

A.1/

Fire dampers

- Reg. II-2/9.

- Reg. II-2/9.

- IMO Res.

B + D

3.22

MSC.61(67) - (FTP

B + E

Code),

B + F

- IMO MSC/

Circ.1120.

A.1/

Non-

Moved to A.1/3.26

3.23

combustible

duct

penetrations

through 'A'

class divisions

A.1/

Electric Cable

Moved to A.1/3.26

3.24

Transits

through 'A'

class divisions

A.1/

‘A’ and ‘B’

- Reg. II-2/9.

- Reg. II-2/9,

- IMO Res.

B + D

3.25

class fire proof

- IMO MSC/Circ.847,

MSC.61(67) - (FTP

B + E

windows and

- IMO MSC/Circ.1120,

Code),

B + F

side scuttles

- IMO MSC/

Circ.1004,

- IMO MSC/

Circ.1036,

- IMO MSC/

Circ.1120.

A.1/

Penetrations

- Reg. II-2/9.

- Reg. II-2/9.

- IMO Res.

B + D

3.26

through 'A'

MSC.61(67) - (FTP

B + E

class divisions

Code),

B + F

(a) electric

- IMO MSC/

cable transits,

Circ.1120.

(b) pipe, duct,

trunk, etc

penetrations

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Penetrations

- Reg. II-2/9.

- Reg. II-2/9.

- IMO Res.

B + D

3.27

through 'B'

MSC.61(67) - (FTP

B + E

class

Code),

B + F

(a) electric

- IMO MSC/

cable transits,

Circ.1120.

(b) pipe, duct,

trunk, etc

penetrations

A.1/

Sprinkler

- Reg. II-2/7,

- Reg. II-2/10,

- ISO 6182-1:2004.

B + D

3.28

systems

- Reg. II-2/10, - IMO Res. MSC.98(73) -

Or,

B + E

(limited to

- IMO Res.

(FSS Code), 8.

- EN 12259-1:1999.

B + F

sprinkler

MSC.98(73) -

heads)

(FSS Code), 8.

A.1/

Fire hoses

- Reg. II-2/10,

- Reg. II-2/10,

- EN 14540:2004.

B + D

3.29

- Reg. X/3.

- IMO Res. MSC.36(63) -

B + E

(1994 HSC Code) 7,

B + F

- IMO Res. MSC.97(73) -

(2000 HSC Code) 7.

A.1/

Portable

- Reg. II-2/4,

- Reg. II-2/4,

- EN 60945:2002,

B + D

3.30

oxygen

- Reg. VI/3.

- IMO Res. MSC.98(73) -

- IEC 60092-

B + E

analysis and

(FSS Code) 15.

504:2001,

B + F

gas detection

- IEC 60533:1999,

equipment

And as applicable to

(a) Category 1: (safe

area)

- EN 50104:2002

including Amd. 2004

Oxygen,

- EN 61779-1:2000,

- EN 61779-4:2000,

(b) Category 2

(explosive gas

atmospheres)

- EN 50104:2002

including Amd. 2004

Oxgygen,

- EN 61779-1:2000,

- EN 61779-4:2000,

- IEC 60079-0:2004,

- IEC 60079-1:2003,

- IEC 60079-10:2002,

- IEC 60079-11:2006,

- IEC 60079-15:2005,

- IEC 60079-26:2006.

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Nozzles for

- Reg. X/3.

- IMO MSC/Circ.912,

- IMO MSC/

B + D

3.31

fixed sprinkler

- IMO Res. MSC.36(63) -

Circ.44(65).

B + E

systems, for

(1994 HSC Code) 7,

B + F

high-speed

- IMO Res. MSC.97(73) -

G

craft

(2000 HSC Code) 7.

A.1/

Fire restricting

- Reg. X/3.

- IMO Res. MSC.36(63) -

- IMO Res.

B + D

3.32

materials

(1994 HSC Code) 7,

MSC.61(67) - (FTP

B + E

(except

- IMO Res. MSC.97(73) -

Code).

B + F

furniture) for

(2000 HSC Code) 7.

high-speed

craft

A.1/

Fire restricting

- Reg. X/3.

- IMO Res. MSC.36(63) -

- IMO Res.

B + D

3.33

materials for

(1994 HSC Code) 7,

MSC.61(67) - (FTP

B + E

furniture for

- IMO Res. MSC.97(73) -

Code).

B + F

high-speed

(2000 HSC Code) 7.

craft

A.1/

Fire resisting

- Reg. X/3.

- IMO Res. MSC.36(63) -

IMO Res.

B + D

3.34

divisions for

(1994 HSC Code) 7,

MSC.61(67) - (FTP

B + E

high speed

- IMO Res. MSC.97(73) -

Code).

B + F

craft

(2000 HSC Code) 7.

A.1/

Fire doors on

- Reg. X/3.

- IMO Res. MSC.36(63) -

- IMO Res.

B + D

3.35

high speed

(1994 HSC Code) 7,

A.754(18),

B + E

craft

- IMO Res. MSC.97(73) -

- IMO Res.

B + F

(2000 HSC Code) 7.

MSC.61(67) - (FTP

Code).

A.1/

Fire dampers

- Reg. X/3.

- IMO Res. MSC.36(63) -

- IMO Res.

B + D

3.36

on high speed

(1994 HSC Code) 7,

A.754(18),

B + E

craft

- IMO Res. MSC.97(73) -

- IMO Res.

B + F

(2000 HSC Code) 7.

MSC.61(67) - (FTP

Code).

A.1/

Penetrations

- Reg. X/3.

- IMO Res. MSC.36(63) -

- IMO Res.

B + D

3.37

through fire

(1994 HSC Code) 7,

A.754(18),

B + E

resisting

- IMO Res. MSC.97(73) -

- IMO Res.

B + F

divisions on

(2000 HSC Code) 7.

MSC.61(67) - (FTP

high-speed

Code).

craft

(a) electric

cable transits,

(b) pipe, duct,

trunk etc

penetrations

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Portable fire-

- Reg. III/4,

- Reg. III/34,

- EN 3-3:1994,

B + D

3.38

extinguishing

- Reg. X/3.

- IMO Res. A.951(23),

- EN 3-6:1995,

B + E

equipment for

- IMO Res. MSC.36(63) -

- EN 3-6A1:1999,

B + F

lifeboats and

(1994 HSC Code) 8,

- EN 3-7:2004.

rescue boats

- IMO Res. MSC.48(66) -

(LSA Code) I, IV, V,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8.

A.1/

Nozzles for

- Reg. II-2/10.

- Reg. II-2/10,

- IMO MSC/

B + D

3.39

equivalent

- IMO Res. MSC.98(73) -

Circ.1165.

B + E

water based

(FSS Code) 7.

B + F

fire

extinguishing

systems for

machinery

spaces of

category ‘A’

and cargo

pump rooms

A.1/

Low-location

- Reg. II-2/13,

- Reg. II-2/13,

- IMO Res.

B + D

3.40

lighting

- IMO Res.

- IMO Res. MSC.98(73) -

A.752(18).

B + E

systems

MSC.98(73) -

(FSS Code) 11.

Or,

B + F

(components

(FSS Code)

- ISO 15370:2001.

G

only)

11. A.1/

Emergency

- Reg. II-2/13.

- Reg. II-2/13.3.4,

- EN 402:2003,

B + D

3.41

escape

- Reg. II-2/13.4.3,

- EN 1146:2005,

B + E

breathing

- IMO Res. MSC.98(73) -

- EN 13794:2002.

B + F

devices

(FSS Code) 3,

(EEBD)

- IMO MSC/Circ.849.

A.1/

Inert gas

- Reg. II-2/4.

- Reg. II-2/4,

- IMO MSC/Circ.353,

B + D

3.42

systems

- IMO Res. A.567(14),

- IMO MSC/Circ.450

B + E

components

- IMO Res. MSC.98(73) -

Rev.1,

B + F

(FSS Code) 15,

- IMO MSC/Circ.485.

G

- IMO MSC/Circ.847

Corr.1,

- IMO MSC/Circ.1120.

A.1/

Nozzles for

- Reg. II-2/1,

- Reg. II-2/1.2.2.3,

- ISO 15371:2000.

B + D

3.43

deep fat

- Reg. II-2/10,

- Reg. II-2/10.6.4,

B + E

cooking

- Reg. X/3.

- IMO Res. MSC.36(63) -

B + F

equipment fire

(1994 HSC Code) 7,

G

extinguishing

- IMO Res. MSC.97(73) -

systems

(2000 HSC Code) 7.

(automatic or

manual type)

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Firefighters

- Reg. II-2/10,

- Reg. II-2/10,

- IMO Res.

B + D

3.44

outfit lifeline

- Reg. X/3,

- IMO Res. MSC.36(63) -

MSC.61(67) - (FTP

B + E

- IMO Res.

(1994 HSC Code) 7,

Code),

B + F

MSC.98(73) -

- IMO Res. MSC.97(73) -

- IMO Res.

(FSS Code) 3.

(2000 HSC Code) 7,

MSC.98(73) - (FSS

- IMO Res. MSC.98(73) -

Code).

(FSS Code) 3.

A.1/

Equivalent

- Reg. II-2/10,

- Reg. II-2/10

- IMO MSC/Circ.848.

B + D

3.45

fixed gas fire

- Reg. X/3,

- IMO Res. MSC.36(63) -

B + E

extinguishing

- IMO Res.

(1994 HSC Code) 7,

B + F

systems

MSC.98(73) -

- IMO Res. MSC.97(73) -

components

(FSS Code) 5.

(2000 HSC Code) 7,

(extinguishing

- IMO Res. MSC.98(73) -

medium, head

(FSS Code) 5.

valves and

- IMO MSC/Circ.848.

nozzles) for

machinery

spaces and

cargo pump

rooms

A.1/

Equivalent

- Reg. II-2/10,

- Reg. II-2/10,

- IMO MSC/

B + D

3.46

fixed gas fire

- Reg. X/3,

- IMO Res. MSC.36(63) -

Circ.1007.

B + E

extinguishing

- IMO Res.

(1994 HSC Code) 7,

B + F

systems

MSC.98(73) -

- IMO Res. MSC.97(73) -

components

(FSS Code) 5,

(2000 HSC Code) 7,

for machinery

- IMO MSC/

- IMO Res. MSC.98(73) -

spaces (aerosol

Circ.1007.

(FSS Code) 5.

systems)

- IMO MSC/Circ.1007.

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Concentrate

- Reg. II-2/10.

- Reg. II-2/10,

- IMO MSC/Circ.670.

B + D

3.47

for fixed high

- IMO Res. MSC.98(73) -

B + E

expansion

(FSS Code) 6.

B + F

foam fire

G

extinguishing

systems for

machinery

spaces and

cargo pump

rooms

Note: The

fixed high

expansion

foam fire

extinguishing

system for

machinery

spaces and

cargo pump

rooms must

still be tested

with the

approved

concentrate to

the satisfaction

of the

Administration

A.1/

Fixed water

- Reg. II-2/1,

- Reg. II-2/1,

- IMO MSC/Circ.913.

B + D

3.48

based local

- Reg. II-2/10,

- Reg. II-2/10,

B + E

application fire

- Reg. II-X/3.

- IMO Res. MSC.36(63) -

B + F

fighting

(1994 HSC Code) 7,

systems

- IMO Res. MSC.97(73) -

components

(2000 HSC Code) 7,

for use in

category 'A'

machinery

spaces.

(Nozzles and

performance

tests)

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Nozzles for

Moved to A.2/3.2

3.49

fixed pressure

water-spraying

fire-

extinguishing

systems for

special

category

spaces, ro-ro

cargo spaces,

ro-ro spaces

and vehicle

spaces

A.1/

Protective

Moved to A.2/3.9

3.50

clothing

resistant to

chemical

attack

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Fixed fire

- Reg. II-2/7,

- Reg. II-2/7.2.2,

Control and indicating

B + D

3.51

detection and

- Reg. X/3,

- Reg. II-2/7.4,

equipment. Electrical

B + E

Ex

fire alarm

- IMO Res.

- Reg. II.2/7.4.1,

installations in ships

B + F

A.2/3.5 systems

MSC.98(73) -

- IMO Res. MSC.36(63) -

- EN 54-2:1997

Ex

components

(FSS Code) 9.

(1994 HSC Code) 7,

including AC:1999

A.2/3.6 for control

- IMO Res. MSC.97(73) -

and A1:2006.

Ex

stations,

(2000 HSC Code) 7,

Power supply

A.2/3.7 service spaces,

- IMO Res. MSC.98(73) -

equipment

Ex

accommo-

(FSS Code) 9.

- EN 54-4:1997

A.2/

dation spaces,

including AC:1999,

3.16

machinery

A1:2002 and

Ex

spaces and

A2:2006.

A.2/

unattented

Heat detectors - Point

3.17

machinery

detectors

spaces

- EN 54-5:2000

including A1:2002.

Smoke detectors -

Point detectors using

scattered light,

transmitted light or

ionization

- EN 54-7:2000

including A1:2002

and A2:2006.

Flame detectors -

Point detectors

- EN 54-10:2002

including A1:2005.

Manual call points

- EN 54-11:2001

including A1:2005.

And, as applicable,

electrical and

electronic installations

in ships

- IEC 60092-

504:2001,

- IEC 60533:1999.

3. Fire protection equipment

Regulation

Regulations of SOLAS 74,

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Non-portable

- Reg. II-2/10,

- Reg. II-2/4,

- EN 1866:1998.

B + D

3.52

and

- Reg. X/3,

- Reg. II-2/10,

Or,

B + E

Ex

transportable

- IMO Res.

- Reg. X/3,

- EN 11601:1999.

B + F

A.2/3.1 extinguishers

MSC.98(73) -

- IMO Res. MSC.36(63) -

(FSS Code) 4.

(1994 HSC Code) 7,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 7,

- IMO Res. MSC.98(73) -

(FSS Code) 4.

A.1/

Alarm devices

- Reg. II-2/7,

- Reg. II-2/7,

Sounders

B + D

3.53

- Reg. X/3,

-IMO Res. MSC.36(63) -

- EN 54-3:2001

B + E

Ex

- IMO Res.

(1994 HSC Code) 7,

including A1:2002

B + F

A.2/

MSC.98(73) -

- IMO Res. MSC.97(73) -

and A2:2006,

3.18

(FSS Code) 9.

(2000 HSC Code) 7,

- IEC 60092-

- IMO Res. MSC.98(73) -

504:2001,

(FSS Code) 9.

- IEC 60533:1999.

A.1/

Fixed oxygen

- Reg. VI/3.

- Reg. II-2/4,

- EN 60945:2002,

B + D

3.54

analysis and

- IMO Res. MSC.98(73) -

- IEC 60092-

B + E

(New

gas detection

(FSS Code) 15.

504:2001,

B + F

item)

equipment

- IEC 60533:1999,

And as applicable to

(a) Category 4: (safe

area)

- EN 50104:2002

including AMD 2004

Oxygen,

- EN 61779-1:2000,

- EN 61779-4:2000.

(b) Category 3

(explosive gas

atmospheres)

- EN 50104:2002

including AMD 2004

Oxygen,

- EN 61779-11:2000.

4. Navigation equipment

Notes applicable to section 4: Navigation equipment

Column 5: Wherever reference is made to EN 61162 series or IEC 61162 series, the intended item layout shall be

taken into account to determine the applicable standard of EN 61162 series or IEC 61162 series.

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Magnetic

- Reg. V/18.

- Reg. V/19,

- EN ISO 449:1999,

B + D

4.1

compass

- IMO Res. A.382(X),

- EN ISO 694:2001,

B + E

- IMO Res. A.694(17).

- ISO 1069:1973,

B + F

- ISO 2269:1992,

G

- EN 60945:2002.

Or,

- ISO 449:1997,

- ISO 694:2000,

- ISO 1069:1973,

- ISO 2269:1992,

- IEC 60945:2002.

A.1/

Transmitting

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

B + D

4.2

heading device

- Reg. V/19,

- IMO Res. A.694(17),

- EN 61162 series,

B + E

THD

- Reg. X/3,

- IMO Res. MSC.36(63) -

- ISO 22090-2:2004

B + F

(magnetic

- IMO Res.

(1994 HSC Code) 13,

including corrigendum G

method)

MSC.36(63) -

- IMO Res. MSC.97(73) -

2005. (1994 HSC

(2000 HSC Code) 13,

Or,

Code) 13,

- IMO Res. MSC.116(73).

- IEC 60945:2002,

- IMO Res.

- IEC 61162 series,

MSC.97(73) -

- ISO 22090-2:2004

(2000 HSC

including corrigendum

Code) 13.

2005. A.1/

Gyro compass

- Reg. V/18.

- Reg. V/19,

- EN ISO 8728:1998,

B + D

4.3

- IMO Res. A.424(XI),

- EN 60945:2002,

B + E

- IMO Res. A.694(17).

- EN 61162 series.

B + F

Or,

G

- ISO 8728:1997,

- IEC 60945:2002,

- IEC 61162 series.

A.1/

Radar

Moved to A.1/4.34, A.1/4.35 and A.1/4.36

4.4

equipment

A.1/

Automatic

Moved to A.1/4.34

4.5

radar plotting

aid (ARPA)

A.1/

Echo sounding

- Reg. V/18,

- Reg. V/19,

- EN ISO 9875:2001,

B + D

4.6

equipment

- Reg. X/3,

- IMO Res. A.224(VII),

- EN 60945:2002,

B + E

- IMO Res.

- IMO Res. A.694(17),

- EN 61162 series.

B + F

MSC.36(63) -

- IMO Res. MSC.36(63) -

Or,

G

(1994 HSC

(1994 HSC Code) 13,

- ISO 9875:2000,

Code) 13,

- IMO Res. MSC.97(73) -

- IEC 60945:2002,

- IMO Res.

(2000 HSC Code) 13.

- IEC 61162 series.

MSC.97(73) -

(2000 HSC

Code) 13.

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Speed and

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

B + D

4.7

distance

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61023:1999,

B + E

measuring

- IMO Res.

- IMO Res. A.824(19),

- EN 61162 series.

B + F

equipment

MSC.36(63) -

- IMO Res. MSC.36(63) -

Or,

G

(SDME)

(1994 HSC

(1994 HSC Code) 13,

- IEC 60945:2002,

Code) 13,

- IMO Res. MSC.97(73) -

- IEC 61023:1999,

- IMO Res.

(2000 HSC Code) 13.

- IEC 61162 series.

MSC.97(73) -

(2000 HSC

Code) 13.

A.1/

Rudder angle, Moved to A.1/4.20, A.1/4.21 and A.1/4.22

4.8

rpm, pitch

indicator

A.1/

Rate-of-turn

Moved to A.2/4.26

4.9

indicator

A.1/

Direction

Item deleted

4.10

finder

A.1/

Loran-C

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

B + D

4.11

equipment

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61075:1993,

B + E

- IMO Res.

- IMO Res. A.824(19),

- EN 61162 series.

B + F

MSC.36(63) -

- IMO Res. MSC.36(63) -

Or,

G

(1994 HSC

(1994 HSC Code) 13,

- IEC 60945:2002,

Code) 13,

- IMO Res. MSC.97(73) -

- IEC 61075:1991,

- IMO Res.

(2000 HSC Code) 13.

- IEC 61162 series.

MSC.97(73) -

(2000 HSC

Code) 13.

A.1/

Chayka

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

B + D

4.12

equipment

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61075:1993,

B + E

- IMO Res.

- IMO Res. A.818(19),

- EN 61162 series.

B + F

MSC.36(63) -

- IMO Res. MSC.36(63) -

Or,

G

(1994 HSC

(1994 HSC Code) 13,

- IEC 60945:2002,

Code) 13,

- IMO Res. MSC.97(73) -

- IEC 61075:1991,

- IMO Res.

(2000 HSC Code) 13.

- IEC 61162 series.

MSC.97(73) -

(2000 HSC

Code) 13.

A.1/

Decca

Item deleted

4.13

navigator

equipment

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

GPS

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

B + D

4.14

equipment

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61108-1:2003,

B + E

- IMO Res.

- IMO Res. A.819(19),

- EN 61162 series.

B + F

MSC.36(63) -

- IMO Res. MSC.36(63) –

Or,

G

(1994 HSC

(1994 HSC Code),

- IEC 60945:2002,

Code) 13,

- IMO Res. MSC.97(73) -

- IEC 61108-1:2003,

- IMO Res.

(2000 HSC Code),

- IEC 61162 series.

MSC.97(73) -

- IMO Res. MSC.112(73).

(2000 HSC

Code) 13.

A.1/

GLONASS

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

B + D

4.15

equipment

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61108-2:1998,

B + E

- IMO Res.

- IMO Res. MSC.36(63) -

- EN 61162 series.

B + F

MSC.36(63) -

(1994 HSC Code) 13,

Or,

G

(1994 HSC

- IMO Res. MSC.97(73) -

- IEC 60945:2002,

Code) 13,

(2000 HSC Code) 13,

- IEC 61108-2:1998,

- IMO Res.

- IMO Res. MSC.113(73).

- IEC 61162 series.

MSC.97(73) -

(2000 HSC

Code) 13.

A.1/

Heading

- Reg. V/18.

- Reg. V/19,

- EN ISO 11674:2001, B + D

4.16

control system

- IMO Res. A.342(IX),

- EN 60945:2002,

B + E

(HCS)

- IMO Res. A.694(17).

- EN 61162 series.

B + F

(formerly

Or,

G

autopilot)

- IEC 11674:2000,

- IEC 60945:2002,

- IEC 61162 series.

A.1/

Mechanical

Moved to A.1/1.40

4.17

pilot hoist

A.1/

9 GHz SAR

- Reg. III/4,

- Reg. III/6,

- EN 60945:2002,

B + D

4.18

transponder

- Reg. IV/14,

- Reg. IV/7,

- EN 61097-1:1993.

B + E

(SART)

- Reg. V/18,

- IMO Res. A.530(13),

Or,

B + F

- Reg. X/3,

- IMO Res. A.802(19),

- IEC 60945:2002,

G

- IMO Res.

- IMO Res. A.694(17),

- IEC 61097-1:1992.

MSC.36(63) -

- IMO Res. MSC.36(63) -

(1994 HSC

(1994 HSC Code) 8, 14,

Code) 13,

- IMO Res. MSC.97(73) -

- IMO Res.

(2000 HSC Code) 8, 14,

MSC.97(73) -

- ITU-R M.628-3(11/93).

(2000 HSC

Code) 13.

A.1/

Radar

Moved to A.1/4.37

4.19

equipment for

high-speed

craft

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Rudder angle

Moved to A.2/4.27

4.20

indicator

A.1/

Propeller

Moved to A.2/4.28

4.21

revolution

indicator

A.1/

Pitch indicator Moved to A.2/4.29

4.22

A. 1/

Compass for

- Reg. III/4,

- Reg. III/34,

- EN ISO 613:2001,

B + D

4.23

lifeboats and

- Reg. X/3,

- IMO Res. MSC.48(66) -

- ISO 10316:1990.

B + E

rescue boats

- IMO Res.

(LSA Code) IV, V,

Or,

B + F

MSC.36(63) -

- IMO Res. MSC.36(63) -

- ISO 613:2000,

G

(1994 HSC

(1994 HSC Code) 8, 13,

- ISO 10316:1990.

Code) 13,

- IMO Res. MSC.97(73) -

- IMO Res.

(2000 HSC Code) 8, 13.

MSC.97(73) -

(2000 HSC

Code) 13.

A.1/

Automatic

Moved to A.1/4.37

4.24

radar plotting

aid (ARPA)

for high speed

craft

A.1/

Automatic

Moved to A.1/4.35

4.25

tracking aid

(ATA)

A.1/

Automatic

Moved to A.1/4.38

4.26

tracking aid

(ATA) for

high speed

craft

A.1/

Electronic

Moved to A.1/4.36

4.27

plotting aid

(EPA)

A.1/

Integrated

Moved to A.2/4.30

4.28

bridge system

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Voyage data

- Reg. V/18,

- Reg. V/20,

- EN 60945:2002,

B + D

4.29

recorder

- Reg. V/20,

- IMO Res. A.694(17),

- EN 61162 series,

B + E

(VDR)

- Reg. X/3,

- IMO Res. A.861(20),

- EN 61996:2001

B + F

- IMO Res.

- IMO Res. MSC.36(63) -

Or,

G

MSC.36(63) -

(1994 HSC Code) 13,

- IEC 60945:2002,

(1994 HSC

- IMO Res. MSC.97(73) -

- IEC 61162 series,

Code) 13,

(2000 HSC Code) 13.

- IEC 61996:2000

- IMO Res.

MSC.97(73) -

(2000 HSC

Code) 13.

A.1/

Electronic

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

B + D

4.30

chart display

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61162 series,

B + E

and

- IMO Res.

- IMO Res. A.817(19),

- EN 61174:2001-12.

B + F

information

MSC.36(63) -

- IMO Res. MSC.36(63) -

Or,

G

system

(1994 HSC

(1994 HSC Code) 13,

- IEC 60945:2002,

(ECDIS) with

Code) 13,

- IMO Res. MSC.97(73) -

- IEC 61162 series,

backup, and

- IMO Res.

(2000 HSC Code) 13.

- IEC 61174:2001-10.

raster chart

MSC.97(73) -

display system

(2000 HSC

[ECDIS back-up and RCDS

(RCDS)

Code) 13.

are only applicable when

this functionality is

included in the ECDIS. The

module B certificate shall

indicate whether these

options were tested].

A.1/

Gyro compass

- Reg. X/3,

- IMO Res. A.694(17),

- ISO 16328:2001,

B + D

4.31

for high-speed

- IMO Res.

- IMO Res. A.821(19),

- EN 60945:2002,

B + E

craft

MSC.36(63) -

- IMO Res. MSC.36(63) -

- EN 61162 series.

B + F

(1994 HSC

(1994 HSC Code) 13,

Or,

G

Code) 13,

- IMO Res. MSC.97(73) -

- ISO 16328:2001,

- IMO Res.

(2000 HSC Code) 13.

- IEC 60945:2002,

MSC.97(73) -

- EN 61162 series.

(2000 HSC

Code) 13.

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Universal

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

B + D

4.32

automatic

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61162 series,

B + E

identification

- IMO Res.

- IMO Res. MSC.36(63) -

- EN 61993-2:2001.

B + F

system

MSC.36(63) - (1994 HSC Code) 13,

Or,

G

equipment

(1994 HSC

- IMO Res. MSC.74(69),

- IEC 60945:2002,

(AIS)

Code) 13,

- IMO Res. MSC.97(73) -

- IEC 61162 series,

- IMO Res.

(2000 HSC Code) 13,

- IEC 61993-2:2001

MSC.97(73) - - ITU-R M. 1371-1(10/00).

(2000 HSC

Code) 13.

Note: ITU-R M. 1371-1(10/

00) Annex 3 shall only be

applicable in accordance

with requirements of IMO

Res. MSC.74(69).

A.1/

Track control

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

B + D

4.33

system

- Reg. X/3.

- IMO Res. A.694(17),

- EN 61162 series,

B + E

(working at

- IMO Res. MSC.74(69).

- EN 62065:2002.

B + F

ship’s speed

Or,

G

from minimum

- IEC 60945:2002,

maneuvering

- IEC 61162 series,

speed up to 30

- IEC 62065:2002.

knots)

A.1/

Radar

- Reg. V/18.

- Reg. V/19,

- EN 60872-1:1998,

B + D

4.34

equipment

- IMO Res. A.278(VIII),

- EN 60936-1:2000,

B + E

with automatic

- IMO Res. A.694(17),

- EN 60936-1

B + F

radar plotting

- IMO Res. A.823(19),

A1:2002,

G

aid (ARPA)

- IMO Res. MSC.64(67),

- EN 60945:2002,

- ITU-R M. 628-3(11/93),

- EN 61162 series.

- ITU-R M. 1177-3(06/03).

Or,

- IEC 60872-1:1998,

- IEC 60936-1

Ed.1.1:2002,

- IEC 60945:2002,

- IEC 61162 series.

A.1/

Radar

- Reg. V/18.

- Reg. V/19,

- EN 60872-2:1999,

B + D

4.35

equipment

- IMO Res. A.278(VIII),

- EN 60936-1:2000,

B + E

with automatic

- IMO Res. A.694(17),

- EN 60936-1

B + F

tracking aid

- IMO Res. MSC.64(67),

A1:2002,

G

(ATA)

- ITU-R M. 628-3(11/93),

- EN 60945:2002,

- ITU-R M. 1177-3(06/03).

- EN 61162 series.

Or,

- IEC 60872-1:1998,

- IEC 60936-1

Ed.1.1:2002,

- IEC 60945:2002,

- IEC 61162 series.

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Radar

- Reg. V/18.

- Reg. V/19,

- EN 60872-3:2001,

B + D

4.36

equipment

- IMO Res. A.278(VIII),

- EN 60936-1:2000,

B + E

with electronic

- IMO Res. A.694(17),

- EN 60936-1

B + F

plotting aid

- IMO Res. MSC.64(67),

A1:2002,

G

(EPA)

- ITU-R M. 628-3(11/93),

- EN 60945:2002,

- ITU-R M. 1177-3(06/03).

- EN 61162 series.

Or,

- IEC 60872-3:2000,

- IEC 60936-1

Ed.1.1:2002,

- IEC 60945:2002,

- IEC 61162 series.

A.1/

Radar

- Reg. X/3,

- IMO Res. A.278(VIII),

- EN 60872-1:1998,

B + D

4.37

equipment

- IMO Res.

- IMO Res. A.694(17),

- EN 60936-2:1999,

B + E

with automatic

MSC.36(63) -

- IMO Res. A.820(19),

- EN 60945:2002,

B + F

radar plotting

(1994 HSC

- IMO Res. MSC.36(63) -

- EN 61162 series.

G

aid (ARPA)

Code) 13,

(1994 HSC Code) 13,

Or,

for high speed

- IMO Res.

- IMO Res. MSC.64(67),

- IEC 60872-1:1998,

craft

MSC.97(73) -

- IMO Res. MSC.97(73) -

- IEC 60936-2:1998,

(2000 HSC

(2000 HSC Code) 13,

- IEC 60945:2002,

Code) 13.

- ITU-R M. 628-3(11/93),

- IEC 61162 series.

- ITU-R M. 1177-3(06/03).

A.1/

Radar

- Reg. X/3,

- IMO Res. A.278(VIII),

- EN 60872-2:1999,

B + D

4.38

equipment

- IMO Res.

- IMO Res. A.694(17),

- EN 60936-2:1999,

B + E

with automatic

MSC.36(63) -

- IMO Res. A.820(19),

- EN 60945:2002,

B + F

tracking aid

(1994 HSC

- IMO Res. MSC.36(63) -

- EN 61162 series.

G

(ATA) for

Code) 13,

(1994 HSC Code) 13,

Or,

high speed

- IMO Res.

- IMO Res. MSC.64(67),

- IEC 60872-2:1998,

craft

MSC.97(73) -

- IMO Res. MSC.97(73) -

- IEC 60936-2:1998,

(2000 HSC

(2000 HSC Code) 13,

- IEC 60945:2002,

Code) 13.

- ITU-R M. 628-3(11/93),

- IEC 61162 series.

- ITU-R M. 1177-3(06/03).

A.1/

Radar reflector - Reg. V/18,

- Reg. V/19,

- EN ISO 8729:1998,

B + D

4.39

- Reg. X/3,

- IMO Res. MSC.36(63) -

- EN 60945:2002.

B + E

- IMO Res.

(1994 HSC Code) 13,

Or,

B + F

MSC.36(63) -

- IMO Res. MSC.97(73) -

- ISO 8729:1997,

G

(1994 HSC

(2000 HSC Code) 13,

- IEC 60945:2002.

Code) 13,

- IMO Res. MSC.164(78),

- IMO Res.

MSC.97(73) -

(2000 HSC

Code) 13.

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Heading

- Reg. X/3,

- IMO Res. A.694(17),

- ISO 16329:2003,

B + D

4.40

control system

- IMO Res.

- IMO Res. A.822(19),

- EN 60945:2002,

B + E

Ex

for high speed

MSC.36(63) -

- IMO Res. MSC.36(63) -

- EN 61162 series.

B + F

A.2/

craft (formerly

(1994 HSC

(1994 HSC Code) 13,

Or,

G

4.2

auto pilot)

Code) 13,

- IMO Res. MSC.97(73) -

- ISO 16329:2003,

- IMO Res.

(2000 HSC Code) 13,

- IEC 60945:2002,

MSC.97(73) -

- IEC 61162 series.

(2000 HSC

Code) 13.

A.1/

Transmitting

- Reg. V/18,

- Reg. V/19,

- ISO 22090-3:2004,

B + D

4.41

heading device

- Reg. X/3,

- IMO Res. A.694(17),

- EN 60945:2002,

B + E

Ex

THD (GNSS

- IMO Res.

- IMO Res. MSC.36(63) -

- EN 61162 series.

B + F

A.2/

method)

MSC.36(63) -

(1994 HSC Code) 13,

Or,

G

4.3

(1994 HSC

- IMO Res. MSC.97(73) -

- ISO 22090-3:2004,

Code) 13,

(2000 HSC Code) 13,

- IEC 60945:2002,

- IMO Res.

- IMO Res. MSC.116(73).

- IEC 61162 series.

MSC.97(73) -

(2000 HSC

Code) 13.

A.1/

Searchlight for

- Reg. X/3,

- IMO Res. A.694(17),

- ISO 17884:2004,

B + D

4.42

high speed

- IMO Res.

- IMO Res. MSC.36(63) -

- EN 60945:2002,

B + E

Ex

craft

MSC.36(63) -

(1994 HSC Code) 13,

Or,

B + F

A.2/

(1994 HSC

- IMO Res. MSC.97(73) -

- ISO 17884:2004,

G

4.5

Code) 13,

(2000 HSC Code) 13,

- IEC 60945:2002.

- IMO Res.

MSC.97(73) -

(2000 HSC

Code) 13.

A.1/

Night vision

- Reg. X/3,

- IMO Res. A.694(17),

- ISO 16273:2003,

B + D

4.43

equipment for

- IMO Res.

- IMO Res. MSC.36(63) -

- EN 60945:2002,

B + E

Ex

high speed

MSC.36(63) -

(1994 HSC Code) 13,

Or,

B + F

A.2/

craft

(1994 HSC

- IMO Res. MSC.94(72),

- ISO 16273:2003,

G

4.6

Code) 13,

- IMO Res. MSC.97(73) -

- IEC 60945:2002.

- IMO Res.

(2000 HSC Code) 13.

MSC.97(73) -

(2000 HSC

Code) 13.

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Differential

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

B + D

4.44

beacon

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61108-1:2003,

B + E

Ex

receiver

- IMO Res.

- IMO Res. MSC.36(63) -

- EN 61108-2:1998,

B + F

A.2/

DGPS,

MSC.36(63)-–

(1994 HSC Code) 13,

- EN 61108-4:2004,

G

4.12

DGLONASS

(1994 HSC

- IMO Res. MSC.97(73) -

- EN 61162 series.

Equipment

Code) 13,

(2000 HSC Code) 13,

Or,

- IMO Res.

- IMO Res. MSC.114(73).

- IEC 60945:2002,

MSC.97(73) -

- IEC 61108-1:2003,

(2000 HSC

- IEC 61108-2:1998,

Code) 13.

- IEC 61108-4:2004,

- IEC 61162 series.

A.1/

Chart facilities

- Reg. V/18,

- Reg. V/19,

- EN 60936-3:2002,

B + D

4.45

for shipborne

- Reg. X/3,

- IMO Res. A.694(17),

- EN 60945:2002,

B + E

Ex

radar

- IMO Res.

- IMO Res. A.817(19),

- EN 61162 series.

B + F

A.2/

MSC.36(63) -

- IMO Res. MSC.36(63) -

Or,

G

4.21

(1994 HSC

(1994 HSC Code) 13,

- IEC 60936-3:2002,

Code) 13,

- IMO Res. MSC.64(67),

- IEC 60945:2002,

- IMO Res.

- IMO Res. MSC.97(73) -

- IEC 61162 series.

MSC.97(73) -

(2000 HSC Code) 13.

(2000 HSC

Code) 13.

A.1/

Transmitting

- Reg. V/18,

- Reg. V/19,

- ISO 22090-1:2002,

B + D

4.46

heading device

- Reg. X/3,

- IMO Res. A.694(17),

- EN 60945:2002,

B + E

Ex

THD

- IMO Res.

- IMO Res. MSC.36(63) -

- EN 61162 series.

B + F

A.2/

(Gyroscopic

MSC.36(63) -

(1994 HSC Code) 13,

Or,

G

4.22

method)

(1994 HSC

- IMO Res. MSC.97(73) -

- ISO 22090-1:2002,

Code) 13,

(2000 HSC Code) 13,

- IEC 60945:2002,

- IMO Res.

- IMO Res. MSC.116(73).

- IEC 61162 series.

MSC.97(73) -

(2000 HSC

Code) 13.

A.1/

Simplified

- Reg. V/20.

- Reg. V/20,

- EN 60945:2002,

B + D

4.47

voyage data

- IMO Res. A.694(17),

- EN 61162 series,

B + E

(New

recorder (S-

- IMO Res. MSC.163(78).

- IEC 61996-2:2006.

B + F

item)

VDR)

Or,

G

- IEC 60945:2002,

- IEC 61162 series,

- IEC 61996-2:2006.

5. Radiocommunication equipment

Notes applicable to section 5: Radiocommunication equipment.

Column 5: In case of conflicting requirements between IMO MSC/Circ.862 and the product testing standards, the

IMO MSC/Circ.862 requirements shall take precedence.

Wherever reference is made to EN 61162 series or IEC 61162 series, the intended item layout shall be taken into

account to determine the applicable standard of EN 61162 series or IEC 61162 series.

5. Radiocommunication equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

VHF radio

- Reg. IV/14,

- Reg. IV/7,

- ETSI ETS 300 162-1 B + D

5.1

capable of

- Reg. X/3,

- Reg. X/3,

V1.4.1:2005-05,

B + E

transmitting

- IMO Res.

- IMO Res. A.385(X),

- ETSI EN 300338

B + F

and receiving

MSC.36(63) -

- IMO Res. A.524(13),

V1.2.1:1999-04,

G

DSC and

(1994 HSC

- IMO Res. A.694(17),

- ETSI EN 300828

radiotelephony

Code) 14,

- IMO Res. A.803(19),

V1.1.1:1998-03,

- IMO Res.

- IMO Res. MSC.36(63) -

- ETSI EN 301925

MSC.97(73) -

(1994 HSC Code) 14,

V1.1.1:2002-09,

(2000 HSC

- IMO Res. MSC.97(73) -

- EN 60495:2002,

Code) 14.

(2000 HSC Code) 14,

- IEC 61097-3:1994,

- IMO MSC/Circ.862,

- IEC 61097-7:1996,

- IMO COMSAR Circ.32,

- EN 61162 series,

- ITU-R M.489-2 (10/95),

- IMO MSC/Circ.862.

- ITU-R M.493-10 (05/00),

- ITU-R M.541-8 (10/97),

- ITU-R M.689-2 (11/93).

A.1/

VHF DSC

- Reg. IV/14,

- Reg. IV/7,

- ETSI EN 300338

B + D

5.2

watch-keeping

- Reg. X/3,

- Reg. X/3,

V1.2.1:1999-04,

B + E

receiver

- IMO Res.

- IMO Res. A.694(17),

- ETSI EN 300828

B + F

MSC.36(63) -

- IMO Res. A.803(19),

V1.1.1:1998-03,

G

(1994 HSC

- IMO Res. MSC.36(63) -

- ETSI EN 301033

Code) 14,

(1994 HSC Code) 14,

V1.2.1:2005-05,

- IMO Res.

- IMO Res. MSC.97(73) –

- EN 60495:2002,

MSC.97(73) -

(2000 HSC Code) 14,

- IEC 61097-3:1994,

(2000 HSC

- IMO COMSAR Circ.32,

- IEC 61097-8:1998.

Code) 14.

- ITU-R M.489-2 (10/95),

- ITU-R M.493-10 (05/00),

- ITU-R M.541-8 (10/97).

A.1/

NAVTEX

- Reg. IV/14,

- Reg. IV/7,

- ETSI EN 300 065-1

B + D

5.3

receiver

- Reg. X/3,

- Reg. X/3,

V1.1.3:2005-5,

B + E

- IMO Res.

- IMO Res. A.694(17),

- ETSI EN 301011

B + F

MSC.36(63) -

- IMO Res. MSC.36(63) -

V1.1.1:1998-09,

G

(1994 HSC

(1994 HSC Code) 14,

- N 60495:2002,

Code) 14,

- IMO Res. MSC.97(73) –

- IEC 61097-6:2005-

- IMO Res.

(2000 HSC Code) 14,

12. MSC.97(73) -

- IMO Res. MSC.148(77),

(2000 HSC

- IMO COMSAR Circ.32,

Code) 14.

- ITU-R M.540-2 (06/90),

- ITU-R M.625-3 (10/95).

5. Radiocommunication equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

EGC receiver

- Reg. IV/14,

- Reg. IV/7,

- ETSI ETS 300460

B + D

5.4

- Reg. X/3,

- Reg. X/3,

Ed.1:1996-05,

B + E

- IMO Res.

- IMO Res. A.570(14),

- ETSI ETS 300 460/

B + F

MSC.36(63) -

- IMO Res. A.664(16),

A1:1997-11,

G

(1994 HSC

- IMO Res. A.694(17),

- ETSI EN 300829

Code) 14,

- IMO Res. MSC.36(63) -

V1.1.1:1998-03,

- IMO Res.

(1994 HSC Code) 14,

- EN 60945:2002,

MSC.97(73) -

- IMO Res. MSC.97(73) -

- IEC 61097-4:1994.

(2000 HSC

(2000 HSC Code) 14,

Code) 14.

- IMO COMSAR Circ.32.

A.1/

HF marine

- Reg. IV/14,

- Reg. IV/7,

- ETSI ETS 300067

B + D

5.5

safety

- Reg. X/3,

- Reg. X/3,

Ed.1:1990-11,

B + E

information

- IMO Res.

- IMO Res. A.694(17),

- ETSI ETS 300 067/

B + F

(MSI)

MSC.36(63) -

- IMO Res. A.699(17),

A1 Ed.1:1993-10,

G

equipment (HF

(1994 HSC

- IMO Res. A.700(17),

- EN 60945:2002,

NBDP

Code) 14,

- IMO Res. A.806(19),

- EN 61162 series.

receiver)

- IMO Res.

- IMO Res. MSC.36(63) –

MSC.97(73) -

(1994 HSC Code) 14,

(2000 HSC

- IMO Res. MSC.97(73) -

Code) 14.

(2000 HSC Code) 14,

- IMO COMSAR Circ.32,

- ITU-R M.491-1 (07/86),

- ITU-R M.492-6 (10/95),

- ITU-R M.540-2 (06/90),

- ITU-R M.625-3 (10/95),

- ITU-R M.688 (06/90).

A.1/

406 MHz

- Reg. IV/14,

- Reg. IV/7,

- ETSI ETS 300066

B + D

5.6

EPIRB

- Reg. X/3,

- Reg. X/3,

v1.3.1:2001-01,

B + E

(COSPAS-

- IMO Res.

- IMO Res. A.662(16),

- EN 60945:2002,

B + F

SARSAT)

MSC.36(63) -

- IMO Res. A.694(17),

- EN 61097-2:2002,

G

(1994 HSC

- IMO Res. A.696(17),

- IMO MSC/Circ.862.

Code) 14,

- IMO Res. A.806(19),

- IMO Res.

- IMO Res. MSC.36(63) -

Note: IMO MSC/Circ

MSC.97(73) -

(1994 HSC Code) 14,

862 is applicable only

(2000 HSC

- IMO Res. MSC.97(73) –

to the optional remote

Code) 14.

(2000 HSC Code) 14,

activation device, not to

- IMO MSC/Circ.862,

the EPIRB itself.

- IMO COMSAR Circ.32,

- ITU-R M.633-2 (05/00),

- ITU-R M.690-1 (10/95).

A.1/

L-band EPIRB Moved to A.2/5.6

5.7

(INMARSAT)

A.1/

2182 kHz

Item deleted

5.8

watch receiver

5. Radiocommunication equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Two-tone

Item deleted

5.9

alarm

generator

A.1/

MF radio

- Reg. IV/14,

- Reg. IV/9,

- ETSI EN 300338

B + D

5.10

capable of

- Reg. X/3,

- Reg. IV/10,

V1.2.1:1999-04,

B + E

transmitting

- IMO Res.

- Reg. X/3,

- ETSI ETS 300 373-1 B + F

and receiving

MSC.36(63) -

- IMO Res. A.694(17),

V1.2.1:2002-10,

G

DSC and

(1994 HSC

- IMO Res. A.804(19),

- EN 60945:2002,

radiotelephony

Code) 14,

- IMO Res. MSC.36(63) -

- EN 61097-3:1994,

- IMO Res.

(1994 HSC Code) 14,

- EN 61097-9:1997,

Note: In line

MSC.97(73) -

- IMO Res. MSC.97(73) -

- EN 61162 series,

with IMO and

(2000 HSC

(2000 HSC Code) 14,

- IMO MSC/Circ.862.

ITU decisions,

Code) 14.

- IMO COMSAR Circ.32,

the

- ITU-R M.493-10 (05/00),

requirements

- ITU-R M.541-8 (10/97).

for Two Tone

Alarm

generator and

transmission

on H3E are no

longer

applicable in

the testing

standards

A.1/

MF DSC

- Reg. IV/14,

- Reg. IV/9,

- ETSI EN 300338

B + D

5.11

watch-keeping

- Reg. X/3,

- Reg. IV/10,

V1.2.1:1999-04,

B + E

receiver

- IMO Res.

- Reg. X/3,

- ETSI ETS 301033

B + F

MSC.36(63) -

- IMO Res. A.694(17),

V1.2.1:2005-05,

G

(1994 HSC

- IMO Res. A.804(19),

- EN 60945:2002,

Code) 14,

- IMO Res. MSC.36(63) -

- EN 61097-3:1994,

- IMO Res.

(1994 HSC Code) 14,

- EN 61097-8:1998.

MSC.97(73) -

- IMO Res. MSC.97(73) -

(2000 HSC

(2000 HSC Code) 14,

Code) 14.

- IMO COMSAR Circ.32,

- ITU-R M.493-10 (05/00),

- ITU-R M.541-8 (10/97),

- ITU-R M.1173 (10/95).

5. Radiocommunication equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Inmarsat-B

- Reg. IV/14,

- Reg. IV/10,

- EN 60945:2002,

B + D

5.12

SES

- Reg. X/3,

- Reg. X/3,

- IEC 61097-10:1999, B + E

- IMO Res.

- IMO Res. A.570(14),

- IMO MSC/Circ.862. B + F

MSC.36(63) -

- IMO Res. A.694(17),

G

(1994 HSC

- IMO Res. A.808(19),

Code) 14,

- IMO Res. MSC.36(63) -

- IMO Res.

(1994 HSC Code) 14,

MSC.97(73) -

- IMO Res. MSC.97(73) -

(2000 HSC

(2000 HSC Code) 14,

Code) 14.

- IMO MSC/Circ.862,

- IMO COMSAR Circ.32.

A.1/

Inmarsat-C

- Reg. IV/14,

- Reg. IV/10,

- ETSI ETS 300460

B + D

5.13

SES

- Reg. X/3,

- Reg. X/3,

Ed.1:1996-05,

B + E

- IMO Res.

- IMO Res. A.570(14),

- ETSI ETS 300460/

B + F

MSC.36(63) -

- IMO Res. A.664(16),

A1:1997-11,

G

(1994 HSC

(applicable only if the

- ETSI EN 300829

Code) 14,

Inmarsat-C SES comprises

V1.1.1:1998-03,

- IMO Res.

EGC functions),

- EN 60945:2002,

MSC.97(73) -

- IMO Res. A.694(17),

- IEC 61097-4:1994,

(2000 HSC

- IMO Res. A.807(19),

- EN 61162 series,

Code) 14.

- IMO Res. MSC.36(63) -

- IMO MSC/Circ.862.

(1994 HSC Code) 14,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 14,

- IMO MSC/Circ.862,

- IMO COMSAR Circ.32.

5. Radiocommunication equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

MF/HF radio

- Reg. IV/14,

- Reg. IV/10,

- ETSI ETS 300067

B + D

5.14

capable of

- Reg. X/3,

- Reg. X/3,

Ed.1:1990-11,

B + E

transmitting

- IMO Res.

- IMO Res. A.694(17),

- ETSI ETS 300 067/

B + F

and receiving

MSC.36(63) -

- IMO Res. A.806(19),

A1 Ed.1:1993-10,

G

DSC, NBDP

(1994 HSC

- IMO Res. MSC.36(63) -

- ETSI EN 300338

and

Code) 14,

(1994 HSC Code) 14,

V1.2.1:1999-04,

radiotelephony

- IMO Res.

- IMO Res. MSC.97(73) -

- ETSI EN 300 373-1

MSC.97(73) -

(2000 HSC Code) 14,

V1.2.1:2002-10,

Note: In line

(2000 HSC

- IMO MSC/Circ.862,

- EN 60945:2002,

with IMO and

Code) 14.

- IMO COMSAR Circ.32,

- IEC 61097-3:1994,

ITU decisions,

- ITU-R M.476-5 (10/95),

- IEC 61097-9:1997,

the

- ITU-R M.491-1 (07/86),

- EN 61162 series,

requirements

- ITU-R M.492-6 (10/95),

- IMO MSC/Circ.862.

for Two Tone

- ITU-R M.493-10 (05/00),

Alarm

- ITU-R M.541-8 (10/97),

generator and

- ITU-R M.625-3 (10/95),

transmission

- ITU-R M.1173 (10/95).

on A3H are no

longer

applicable in

testing

standards.

A.1/

MF/HF DSC

- Reg. IV/14,

- Reg. IV/10,

- ETSI EN 300338

B + D

5.15

watch keeping

- Reg. X/3,

- Reg. X/3,

V1.2.1:1999-04,

B + E

receiver

- IMO Res.

- IMO Res. A.694(17),

- ETSI EN 301033

B + F

MSC.36(63) -

- IMO Res. A.806(19),

V1.2.1:2005-05,

G

(1994 HSC

- IMO Res. MSC.36(63) -

- EN 60945:2002,

Code) 14,

(1994 HSC Code) 14,

- IEC 61097-3:1994,

- IMO Res.

- IMO Res. MSC.97(73) -

- IEC 61097-8:1998.

MSC.97(73)-–

(2000 HSC Code) 14,

(2000 HSC

- IMO COMSAR Circ.32,

Code) 14.

- ITU-R M.493-10 (05/00),

- ITU-R M.541-8 (10/97).

A.1/

Aeronautical

- Reg. IV/14,

- Reg. IV/7,

- ETSI EN 301688

B + D

5.16

two way VHF

- Reg. X/3,

- IMO Res. A.694(17),

V1.1.1:2000-07,

B + E

radio

- IMO Res.

- IMO Res. MSC.36(63) -

- EN 60945:2002.

B + F

telephone

MSC.36(63) -

(1994 HSC Code) 14,

G

apparatus

(1994 HSC

- IMO Res. MSC.97(73) -

Code) 14,

(2000 HSC Code) 14,

- IMO Res.

- IMO Res. MSC.80(70),

MSC.97(73) -

- IMO COMSAR Circ.32,

(2000 HSC

- ICAO Convention, Annex

Code) 14.

10, Radio Regulations.

5. Radiocommunication equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Portable

- Reg. IV/14,

- Reg. III/6,

- ETSI EN 300225

B + D

5.17

survival craft

- Reg. X/3,

- IMO Res. A.694(17),

V1.4.1:2004-12,

B + E

two-way VHF

- IMO Res.

- IMO Res. MSC.36(63) -

- EN 300828

B + F

radiotelephone

MSC.36(63) -

(1994 HSC Code) 8, 14,

V1.1.1:1998-03,

G

apparatus

(1994 HSC

- IMO Res. MSC.97(73) -

- EN 60945:2002,

Code) 14,

(2000 HSC Code) 8, 14,

- IEC 61097-12:1996.

- IMO Res.

- IMO Res. MSC.149(77),

MSC.97(73) -

- ITU-R M.489-2 (10/95),

(2000 HSC

- ITU-R M.542-1 (07/82).

Code) 14.

A.1/

Fixed survival

- Reg. IV/14,

- Reg. III/6,

- ETSI EN 301466

B + D

5.18

craft two-way

- Reg. X/3,

- IMO Res. A.694(17),

V1.1.1:2000-11,

B + E

VHF

- IMO Res.

- IMO Res. A.809(19),

- EN 60945:2002,

B + F

radiotelephone

MSC.36(63) -

- IMO Res. MSC.36(63) -

- IEC 61097-12:1996.

G

apparatus

(1994 HSC

(1994 HSC Code) 8, 14,

Code) 14,

- IMO Res. MSC.97(73) -

- IMO Res.

(2000 HSC Code) 8, 14,

MSC.97(73) -

- ITU-R M.489-2 (10/95).

(2000 HSC

Code) 14.

A.1/

Inmarsat-F

- Reg. IV/14,

- Reg. IV/10,

- EN 60945:2002,

B + D

5.19

SES

- Reg. X/3,

- IMO Res. A.570(14),

- IEC 61097-13:2003, B + E

Ex

- IMO Res.

- IMO Res. A.694(17),

- IMO MSC/Circ.862 B + F

A.2/

MSC.36(63) -

- IMO Res. A.808(19),

G

5.3

(1994 HSC

- IMO Res. MSC.36(63) -

Code) 14,

(1994 HSC Code) 14,

- IMO Res.

- IMO Res. MSC.97(73) -

MSC.97(73) -

(2000 HSC Code) 14,

(2000 HSC

- IMO MSC/Circ.862,

Code) 14.

- IMO COMSAR Circ.32.

6. Equipment required under COLREG 72

Regulation

Regulations of COLREG and

COLREG 72

Modules for

Item

the relevant resolutions and

No

where 'type-

Testing standards

Conformity

designation

circulars of the IMO, as

approval' is

Assessment

applicable

required

A.1/

Navigation

- COLREG

- Annex I/14,

- EN 14744:2005,

B + D

6.1

lights

Annex I/14.

- IMO Res. A.694(17).

- EN 60495:2002.

B + E

Ex

B + F

A.2/

G

6.1

Schedule Ib

(Based on Annex A.2 of Directive 96/98/EC)

[Regulations 2(1), 3 and 9(4)]

Equipment for which no detailed testing standards already exist

in International Instruments

1. Life-saving appliances

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Radar reflector

- Reg. III/4,

- IMO Res. MSC.48(66) -

1.1

for liferafts

- Reg. III/34,

(LSA Code).

- Reg. X/3.

A.2/

Immersion suit

- Reg. III/4,

- IMO Res. MSC.48(66) -

1.2

materials

- Reg. III/34.

(LSA Code).

A.2/

Float-free

- Reg. III/4,

- Reg. III/13,

1.3

launching

- Reg. III/34.

- Reg. III/16,

appliances for

- Reg. III/26,

survival craft

- Reg. III/34,

- IMO Res. MSC.36(63) -

(1994 HSC Code) 8,

- IMO Res. MSC.48(66) -

(LSA Code) I, IV, VI,

- IMO Res. MSC.97(73) -

(2000 HSC Code) 8,

- IMO MSC/Circ.980.

A.2/

Embarkation

- Reg. III/4,

- Reg. III/34,

- ISO 799:1980.

1.4

ladders

- Reg. X/3.

- IMO Res. MSC.36(63) -

(1994 HSC Code),

- IMO Res. MSC.48(66) -

(LSA Code),

- IMO Res. MSC.97(73) -

(2000 HSC Code).

A.2/

Public address

- Reg. III/6.

- IMO Res. MSC.36(63) -

1.5

& general

(1994 HSC Code),

Ex

emergency

- IMO Res. MSC.48(66) -

A.2/

alarm system

(LSA Code),

1.3

(when used as

- IMO Res. MSC.97(73) -

fire alarm

(2000 HSC Code),

device item

- IMO MSC/Circ.808.

A.1/3.53 shall

apply)

2. Marine pollution prevention

Regulation

Regulations of MARPOL

MARPOL73/

Modules for

Item

73/78 and the relevant

No

78 where 'type-

Testing standards

Conformity

designation

resolutions and circulars of

approval' is

Assessment

the IMO, as applicable

required

A.2/

On board NOx

- Annex VI

- Annex VI Reg. 13,

2.1

monitoring and

Reg. 13,

- NOx Technical Code.

recording

- NOx

devices

Technical

Code.

A.2/

On board

- Annex VI

- Annex VI Reg. 13.3(b)(i),

- IMO Res.

2.2

exhaust gas

Reg.

- Annex VI Reg. 14.4(b).

MEPC.130(55).

cleaning

13.3(b)(i),

systems

- Annex VI

Reg. 14.4(b).

A.2/

Equivalent

- Annex VI

- Annex VI Reg. 13.3(b)(ii).

2.3

methods to

Reg.

reduce on

13.3(b)(ii).

board NOx

emissions

A.2/

Other

- Annex VI

- Annex VI Reg. 14.4(c).

2.4

technological

Reg. 14.4(c).

methods to

limit SOx

emissions

A.2/

Ballast water

- IMO Res.

2.5

management

MEPC.125(53),

systems

- IMO Res.

MEPC.126(53).

3. Fire protection equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Non-portable

Moved to A.1/3.52

3.1

and

transportable

extinguishers

3. Fire protection equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Nozzles for

- Reg. II-2/19,

- Reg. II-2/19,

- IMO Res. A.123(V),

3.2

fixed pressure

- Reg. II-2/20,

- Reg. II-2/20,

- IMO MSC.Circ.914.

water-spraying

- Reg. X/3,

- IMO Res. MSC.36(63) -

fire

- IMO Res.

(1994 HSC Code) 7,

extinguishing

MSC.98(73) -

- IMO Res. MSC.97(73) -

systems for

(FSS Code) 7.

(2000 HSC Code) 7,

special

- IMO Res. MSC.98(73) -

category

(FSS Code) 7.

spaces, ro-ro

cargo spaces,

ro-ro spaces

and vehicles

spaces

A.2/

Cold-weather

- Reg. II-1/44, - Reg. II-1/44,

3.3

starting of

- Reg. X/3.

- IMO Res. MSC.36(63) -

generator sets

(1994 HSC Code),

(starting

- IMO Res. MSC.97(73) -

devices)

(2000 HSC Code).

A.2/

Dual purpose

- Reg. II-2/10, - Reg. II-2/10,

3.4

type nozzles

- Reg. X/3.

- IMO Res. MSC.36(63) -

(spray/jet type)

(1994 HSC Code),

- IMO Res. MSC.97(73) -

(2000 HSC Code).

A.2/

Fixed fire

Moved to A.1/3.51

3.5

detection and

fire alarm

systems

components for

control

stations,

service spaces,

accommo-

dation spaces,

machinery

spaces and

unattended

machinery

spaces

A.2/

Smoke

Moved to A.1/3.51

3.6

detectors

A.2/

Heat detectors

Moved to A.1/3.51

3.7

3. Fire protection equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Electric safety

- Reg. II-2/10,

- Reg. II-2/10,

- IEC Publication 79.

3.8

lamp

- Reg. X/3,

- IMO Res. MSC.36(63) -

- IMO Res.

(1994 HSC Code),

MSC.98(73) -

- IMO Res. MSC.97(73) -

(FSS Code).

(2000 HSC Code),

- IMO Res. MSC.98(73) -

(FSS Code).

A.2/

Protective

- Reg. II-2/19.

- Reg. II-2/19,

- EN 943-1:2002,

3.9

clothing

- IMO Res. MSC.36(63) -

- EN 943-1:2002/AC

resistant to

(1994 HSC Code) 7,

2005,

chemical attack

- IMO Res. MSC.97(73) -

- EN 943-2:2002,

(2000 HSC Code) 7.

- EN ISO 6529:2003,

- EN ISO 6530:2005,

- EN 14605:2005,

- IMO MSC/Circ.1120.

A.2/

Low-location

Moved to A.1/3.40

3.10

lighting

systems

A.2/

Nozzles for

- Reg. II-2/10,

- Reg. II-2/10,

3.11

fixed pressure

- Reg. X/3,

- IMO Res. MSC.36(63) -

water spraying

- IMO Res.

(1994 HSC Code),

fire

MSC.98(73) -

- IMO Res. MSC.97(73) -

extinguishing

(FSS Code).

(2000 HSC Code),

systems for

- IMO Res. MSC.98(73) -

machinery

(FSS Code).

spaces

A.2/

Equivalent

Moved to A.1/3.45

3.12

fixed gas fire

extinguishing

systems for

machinery

spaces and

cargo pump

rooms

A.2/

Compressed

- Reg. II-2/10,

- Reg. II-2/10,

- EN 14593-1:2005,

3.13

airline

- Reg. X/3,

- IMO Res. MSC.36(63) -

- EN 14593-2:2005.

breathing

- IMO Res.

(1994 HSC Code) 7,

apparatus

MSC.98(73) -

- IMO Res. MSC.97(73) -

(High Speed

(FSS Code).

(2000 HSC Code) 7,

Craft)

- IMO Res. MSC.98(73) -

(FSS Code) 3.

3. Fire protection equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Fire hoses (reel

- Reg. II-2/10, - Reg. II-2/10,

- EN 671-1:1994 +

3.14

type)

- Reg. X/3.

- IMO Res. MSC.36(63) -

AC:1995.

(1994 HSC Code),

- IMO Res. MSC.97(73) -

(2000 HSC Code).

A.2/

Sample

- Reg. II-2/7,

- Reg. II-2/7,

3.15

extraction

- Reg. II-2/19,

- Reg. II-2/19,

smoke

- Reg. II-2/20,

- Reg. II-2/20,

detection

- IMO Res.

- IMO Res. MSC.98(73) -

systems

MSC.98(73) -

(FSS Code).

components

(FSS Code).

A.2/

Flame detectors Moved to A.1/3.51

3.16

A.2/

Manual call

Moved to A.1/3.51

3.17

points

A.2/

Alarm devices Moved to A.1/3.53

3.18

A.2/

Fixed water

Moved to A.1/3.48

3.19

based local

application fire

fighting

systems

components for

use in category

'A' machinery

spaces

A.2/

Upholstered

Moved to A.1/3.20

3.20

furniture

A.2/

Paint lockers

- Reg. II-2/10. - Reg. II-2/10,

- IMO MSC/Circ.847.

3.21

and flammable

- IMO Res. MSC.98(73) -

liquid lockers

(FSS Code).

fire

extinguishing

systems

components

A.2/

Galley exhaust

- Reg. II-2/9.

- Reg. II-2/9.

3.22

duct fixed fire

extinguishing

systems

components

3. Fire protection equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Helicopter deck

- Reg. II-2/18. - Reg. II-2/18.

3.23

fire

extinguishing

systems

components

A.2/

Portable foam

- Reg. II-2/10, - Reg. II-2/10,

3.24

applicator units

- Reg. II-2/20, - Reg. II-2/20,

- Reg. X/3.

- IMO Res. MSC.36(63) -

(1994 HSC Code),

- IMO Res. MSC.97(73) -

(2000 HSC Code),

- IMO Res. MSC.98(73) -

(FSS Code).

A.2/

‘C’ class

- Reg. II-2/3.

- Reg. II-2/3.

- IMO Res. A.653(16),

3.25

divisions

- IMO Res. A.799(19),

- IMO Res.

MSC.61(67) - (FTP

Code),

- ISO 1716:1973.

A.2/

Gaseous fuel

- Reg. II-2/4.

- Reg. II-2/4.

3.26

systems used

for domestic

purposes

(components)

A.2/

Fixed gas fire

- Reg. II-2/5, - Reg. II-2/10,

- prEN 12094 Parts 1-

3.27

extinguishing

- Reg. II-2/10, - IMO Res. MSC.36(63) -

20. systems (CO 2 )

- Reg. X/3.

(1994 HSC Code),

- IMO Res. MSC.97(73) -

components

(2000 HSC Code),

- IMO Res. MSC.98(73) -

(FSS Code).

A.2/

Medium

- Reg. II-2/10. - Reg. II-2/10.8.1,

- IMO MSC/Circ.798.

3.28

expansion foam

- IMO Res. MSC.98(73) -

fire

(FSS Code).

extinguishing

systems

components -

fixed deck

foam for

tankers

3. Fire protection equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Fixed low

- Reg. II-2/10. - Reg. II-2/10,

- IMO MSC/Circ.582

3.29

expansion foam

- IMO Res. MSC.98(73) -

and Corrigendum 1.

fire

(FSS Code).

extinguishing

systems

components for

machinery

spaces and

tanker deck

protection

A.2/

Expansion

- IMO Res.

- IMO Res. MSC.4(48) -

- IMO MSC/Circ.553,

3.30

foam for fixed

MSC.4(48) -

(IBC Code).

- IMO MSC/Circ.582,

fire

(IBC Code).

- IMO MSC/Circ.799.

extinguishing

systems for

chemical

tankers

A.2/

Water spraying

- Reg. II-2/10. - Reg. II-2/10, A800(19).

3.31

hand operated

system

4. Navigation equipment

Notes applicable to section 4: Navigation equipment

Columns 3 and 4: References to SOLAS Chapter V are to SOLAS 1974 as amended by MSC 73 and entering into

force on 1 July 2002.

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Gyro compass

Moved to A.1/4.3.1

4.1

for high speed

craft

A.2/

Heading

Moved to A.1/4.41

4.2

control system

for high speed

craft (formerly

auto-pilot)

A.2/

Transmitting

Moved to A.1/4.41

4.3

heading device

THD (GNSS

method)

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Daylight

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002.

4.4

signalling lamp

- Reg. X/3,

- IMO Res. A.694(17),

Or,

- IMO Res.

- IMO Res. MSC.36(63) -

- IEC 60945:2002.

MSC.36(63)-–

(1994 HSC Code),

(1994 HSC

- IMO Res. MSC.95(72),

Code),

- IMO Res. MSC.97(73) -

- IMO Res.

(2000 HSC Code).

MSC.97(73) -

(2000 HSC

Code).

A.2/

Searchlight for Moved to A.1/4.42

4.5

high speed craft

A.2/

Night vision

Moved to A.1/4.43

4.6

equipment for

high speed craft

A.2/

Track control

Moved to A.1/4.33

4.7

system

A.2/

Electronic chart Moved to A.1/4.30

4.8

display and

information

system

(ECDIS)

A.2/

Electronic chart Moved to A.1/4.30

4.9

display and

information

system

(ECDIS)

backup

A.2/

Raster chart

Moved to A.1/4.30

4.10

display system

(RCDS)

A.2/

Combined

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

4.11

GPS/

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61162 series.

GLONASS

- IMO Res.

- IMO Res. MSC.36(63) -

Or,

equipment

MSC.36(63) -

(1994 HSC Code),

- IEC 60945:2002,

(1994 HSC

- IMO Res. MSC.74(69),

- IEC 61162 series.

Code),

- IMO Res. MSC.97(73) -

- IMO Res.

(2000 HSC Code).

MSC.97(73) -

(2000 HSC

Code).

A.2/

DGPS,

Moved to A.1/4.44

4.12

DGLONASS

equipment

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Gyro compass Moved to A.1/4.31

4.13

for high- speed

craft

A.2/

Voyage data

Moved to A.1/4.29

4.14

recorder (VDR)

A.2/

Integrated

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

4.15

navigation

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61162 series,

system

- IMO Res.

- IMO Res. MSC.86(70).

- IEC 61924:2006.

MSC.36(63) -

Or,

(1994 HSC

- IEC 60945:2002,

Code) 13,

- IEC 61162 series,

- IMO Res.

- IEC 61924:2006.

MSC.97(73) -

(2000 HSC

Code) 13.

A.2/

Integrated

Moved to A.1/4.28

4.16

bridge system

A.2/

Radar target

- Reg. V/18,

- IMO Res. A.694(17),

- EN 60945:2002.

4.17

enhancer

- Reg. X/3,

- ITU-R M 1176 (10/95).

Or,

- IMO Res.

- IEC 60945:2002.

MSC.36(63) -

(1994 HSC

Code),

- IMO Res.

MSC.97(73) -

(2000 HSC

Code).

A.2/

Sound

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

4.18

reception

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61162 series.

system

- IMO Res.

- IMO Res. MSC.36(63) -

Or,

MSC.36(63) -

(1994 HSC Code),

- IEC 60945:2002,

(1994 HSC

- IMO Res. MSC.86(70),

- IEC 61162 series.

Code) 13,

- IMO Res. MSC.97(73) -

- IMO Res.

(2000 HSC Code).

MSC.97(73) -

(2000 HSC

Code) 13.

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Magnetic

- Reg. X/3,

- IMO Res. A.382(X),

- EN ISO 449:1999,

4.19

compass for

- IMO Res.

- IMO Res. A.694(17),

- EN ISO 694:2001,

high speed craft MSC.36(63) -

- IMO Res. MSC.36(63) -

- ISO 1069:1973,

(1994 HSC

(1994 HSC Code),

- ISO 2269:1992,

Code) 13,

- IMO Res. MSC.97(73) -

- EN 60945:2002.

- IMO Res.

(2000 HSC Code).

Or,

MSC.97(73) -

- ISO 449:1999,

(2000 HSC

- ISO 694:2001,

Code) 13.

- ISO 1069:1973,

- ISO 2269:1992,

- IEC 60945:2002.

A.2/

Track control

- Reg. X/3,

- IMO Res. A.694(17),

- EN 60945:2002,

4.20

system for high

- IMO Res.

- IMO Res. MSC.36(63) -

- EN 61162 series.

speed craft

MSC.36(63) -

(1994 HSC Code),

Or,

(1994 HSC

- IMO Res. MSC.97(73) -

- IEC 60945:2002,

Code) 13,

(2000 HSC Code).

- IEC 61162 series.

- IMO Res.

MSC.97(73) -

(2000 HSC

Code) 13.

A.2/

Chart facilities Moved to A.1/4.45

4.21

for shipborne

radar

A.2/

Transmitting

Moved to A.1/4.46

4.22

heading device

THD

(Gyroscopic

method)

A.2/

Transmitting

Moved to A.1/4.2

4.23

heading device

THD

(Magnetic

method)

A.2/

Thrust

- Reg. V/18,

- Reg. V/19,

4.24

indicator

- Reg. X/3,

- IMO Res. A.694(17),

- IMO Res.

- IMO Res. MSC.36(63) -

MSC.36(63) -

(1994 HSC Code),

(1994 HSC

- IMO Res. MSC.97(73) -

Code),

(2000 HSC Code).

- IMO Res.

MSC.97(73)-

(2000 HSC

Code).

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Lateral thrust,

- Reg. V/18,

Reg. V/19,

4.25

pitch and mode

- Reg. X/3,

- IMO Res. A.694(17),

indicators

- IMO Res.

- IMO Res. MSC.36(63) -

MSC.36(63) -

(1994 HSC Code),

(1994 HSC

- IMO Res. MSC.97(73) -

Code),

(2000 HSC Code).

- IMO Res.

MSC.97(73) -

(2000 HSC

Code).

A.2/

Rate-of-turn

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

4.26

indicator

- Reg. X/3,

- IMO Res. A.526(13),

- EN 61162 series.

Ex

- IMO Res.

- IMO Res. A.694(17),

Or,

A.1/

MSC.36(63) -

- IMO Res. MSC.36(63) -

- IEC 60945:2002,

4.9

(1994 HSC

(1994 HSC Code) 13,

- IEC 61162 series.

Code) 13,

- IMO Res. MSC.97(73) -

- IMO Res.

(2000 HSC Code) 13.

MSC.97(73) -

(2000 HSC

Code) 13.

A.2/

Rudder angle

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002.

4.27

indicator

- Reg. X/3,

- IMO Res. A.694(17),

Or,

Ex

- IMO Res.

- IMO Res. MSC.36(63) -

- IEC 60945:2002.

A.1/

MSC.36(63) -

(1994 HSC Code) 13,

4.20

(1994 HSC

- IMO Res. MSC.97(73) -

Code) 13,

(2000 HSC Code) 13.

- IMO Res.

MSC.97(73) -

(2000 HSC

Code) 13.

A.2/

Propeller

- Reg. V/18.

- Reg. V/19,

- EN 60945:2002.

4.28

revolution

- IMO Res. A.694(17).

Or,

Ex

indicator

- IEC 60945:2002.

A.1/

4.21

A.2/

Pitch indicator

- Reg. V/18.

- Reg. V/19,

- EN 60945:2002.

4.29

- IMO Res. A.694(17).

Or,

Ex

- IEC 60945:2002.

A.1/

4.22

4. Navigation equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Integrated

- Reg. V/18,

- Reg. V/19,

- EN 60945:2002,

4.30

bridge system

- Reg. X/3,

- IMO Res. A.694(17),

- EN 61162 series,

Ex

- IMO Res.

- IMO Res. MSC.36(63) -

- EN 61209:1999.

A.1/

MSC.36(63) -

(1994 HSC Code) 15,

Or,

4.28

(1994 HSC

- IMO Res. MSC.64(67),

- IEC 60945:2002,

Code) 13,

- IMO Res. MSC.97(73) -

- IEC 61162 series,

- IMO Res.

(2000 HSC Code) 15.

- IEC 61209:1999.

MSC.97(73) -

(2000 HSC

Code) 13.

A.2/ Bearing device

- Reg. V/18.

- Reg. V/19.

- EN 60945:2002.

4.31

(New

item)

A.2/

Bridge

- IMO Res. A.694(17),

4.32

Navigational

- IMO Res. MSC.128(75),

(New

Watch Alarm

- IMO MSC.Circ.982.

item)

System

(BNWAS)

A.2/

Track control

- Reg. V/18,

- EN 60945:2002.

4.33

system

- Reg. X/3.

(New

(working at

item)

ship’s speed

from 30 knots

and above)

5. Radiocommunication equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

VHF EPIRB

- Reg. IV/14,

- Reg. IV/18,

- EN 60945:2002.

5.1

- Reg. X/3,

- IMO Res. A.662(16),

Or,

- IMO Res.

- IMO Res. A.694(17),

- IEC 60945:2002.

MSC.36(63) -

- IMO Res. A.805(19),

(1994 HSC

- IMO Res. MSC.36(63) -

Code),

(1994 HSC Code),

- IMO Res.

- IMO Res. MSC.97(73) -

MSC.97(73) -

(2000 HSC Code),

(2000 HSC

- ITU-R M.489-2 (10/95),

Code).

- ITU-R M.693 (06/90).

5. Radiocommunication equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Radio reserve

- Reg. IV/14,

- Reg. IV/13,

- EN 60945:2002.

5.2

source of

- Reg. X/3,

- IMO Res. A.694(17),

Or,

energy

- IMO Res.

- IMO Res. MSC.36(63) -

- IEC 60945:2002.

MSC.36(63) -

(1994 HSC Code),

(1994 HSC

- IMO Res. MSC.97(73) -

Code),

(2000 HSC Code),

- IMO Res.

- IMO COMSAR Circ.16,

MSC.97(73) -

- IMO COMSAR Circ.32.

(2000 HSC

Code).

A.2/

Inmarsat-F SES Moved to A.1/5.19

5.3

A.2/

Distress panel

- Reg. IV/14,

- Reg. IV/6,

- EN 60945:2002.

5.4

- Reg. X/3,

- IMO Res. A.694(17),

Or,

- IMO Res.

- IMO Res. MSC.36(63) -

- IEC 60945:2002.

MSC.36(63) -

(1994 HSC Code),

(1994 HSC

- IMO Res. MSC.97(73) -

Code),

(2000 HSC Code),

- IMO Res.

- IMO MSC/Circ.862,

MSC.97(73) -

- IMO COMSAR Circ.32.

(2000 HSC

Code).

A.2/

Distress alarm

- Reg. IV/14,

- Reg. IV/6,

- EN 60945:2002.

5.5

or alert panel

- Reg. X/3,

- IMO Res. A.694(17),

Or,

- IMO Res.

- IMO Res. MSC.36(63) -

- IEC 60945:2002.

MSC.36(63) -

(1994 HSC Code),

(1994 HSC

- IMO Res. MSC.97(73) -

Code),

(2000 HSC Code),

- IMO Res.

- IMO MSC/Circ.862,

MSC.97(73) -

- IMO COMSAR Circ.32.

(2000 HSC

Code).

A.2/

L-band EPIRB

- Reg. IV/14,

- Reg. IV/7,

- ETSI ETS 300372

5.6

(INMARSAT)

- Reg. X/3,

- Reg. X/3,

Ed.1:1996-05,

Ex

- IMO Res.

- IMO Res. A.662(16),

- EN 60945:2002,

A.1/

MSC.36(63) -

- IMO Res. A.694(17),

- IEC 61097-5:1997,

5.7

(1994 HSC

- IMO Res. A.812(19),

- IMO MSC/Circ.862.

Code) 14,

- IMO Res. MSC.36(63) -

- IMO Res.

(1994 HSC Code) 14,

Note: IMO MSC/

MSC.97(73) -

- IMO Res. MSC.97(73) -

Circ.862 is applicable

(2000 HSC

(2000 HSC Code) 14,

only to the optional

Code) 14.

- IMO MSC/Circ.862,

remote activation

- IMO COMSAR Circ.32,

device, not to the

- ITU-R M.632-3 (02/97),

EPIRB itself.

- ITU-R M.690-1 (10/95).

5. Radiocommunication equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/ Ship security

- Reg. XI-2/6,

- EN 60945:2002.

5.7

alert system

- IMO Res. A.694(17),

Or,

(New

- IMO Res. MSC.147(77),

- IEC 60945:2002.

item)

- IMO MSC/Circ.1072.

6. Equipment required under COLREG 72

Regulation

Regulations of COLREG 72

COLREG 72

Modules for

Item

and the relevant resolutions

No

where 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Navigation

Moved to A.1/6.1

6.1

lights

A.2/

Sound signal

- Annex III/3.

- Annex III/3,

- EN 60945:2002,

6.2

appliances

- IMO Res. A.694(17).

- Whistles - COLREG

72 Annex III/I

(Performance),

- Bells or Gongs -

COLREG 72 Annex

III/2 (Performance),

- IEC 60945:1996,

- Whistles - COLREG

72 Annex III/I

(Performance),

- Bells or Gongs -

COLREG 72 Annex

III/2 (Performance).

7. Bulk carrier safety equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

here 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/

Loading

- Reg. XII/11, - Reg. XII/11,

7.1

instrument

- 1997

- 1997 SOLAS Conference

SOLAS

Res. 5.

Conference

Res. 5.

7. Bulk carrier safety equipment

Regulation

Regulations of SOLAS 74

SOLAS 74

Modules for

Item

and the relevant resolutions

No

here 'type-

Testing standards

Conformity

designation

and circulars of the IMO, as

approval' is

Assessment

applicable

required

A.2/ Water level

- IMO Res.

- Reg. XII/12,

- IEC 60092-0504,

7.2

detectors on

MSC.188(79)

- IMO Res. MSC.188(79).

- IEC 60529,

(New bulk carriers

- IMO Res.

item)

MSC.188(79).

Schedule II

(Based on Annex B of Directive 96/98/EC)

[Regulations 3, 5(5), 8(1) and (2)]

Modules for Conformity Assessment

EC TYPE-EXAMINATION (MODULE B)

1. A notified body must ascertain and attest that a specimen, representative

of the production envisaged, complies with the provisions of the international

instruments that apply to it.

2. The application for the EC type-examination must be lodged by the

manufacturer or his authorized representative established within the Community

with a notified body of his choice.

The application must include

-

the name and address of the manufacturer and, if the application

is lodged by the authorized representative, his name and address as well,

-

a written declaration that the same application has not been

lodged simultaneously with any other notified body,

-

the technical documentation as described in point 3.

The applicant must place at the disposal of the notified body a

specimen, representative of the production envisaged and hereinafter called 'type'

( * ). The notified body may request further specimens if needed for the test

programme.

3. The technical documentation must make it possible to assess the

product's compliance with the requirements of the relevant international

instruments. It must, as far as is relevant for such assessment, cover the design, the

building standard, manufacture, installation and functioning of the product in

accordance with the description of technical documentation set down in the

Appendix to this Schedule.

4. The notified body must

(a)

examine the technical documentation and verify that the type has

been manufactured in accordance with the technical documentation;

(b) perform the appropriate examinations and necessary tests or have

them performed to check whether the requirements of the relevant

international instruments have actually been met;

(c)

agree with the applicant on the location where the examinations

and necessary tests will be carried out.

5. Where the type meets the provisions of the relevant international

instruments, the notified body must issue an EC type-examination certificate to the

applicant. The certificate must give the name and address of the manufacturer,

details of the equipment, the conclusions of the examination, the conditions of its

validity and the necessary data for identification of the approved type.

A list of the relevant parts of the technical documentation must be

annexed to the certificate and a copy kept by the notified body.

If a manufacturer is refused a type-certification, the notified body must

give detailed reasons for that refusal.

Where a manufacturer reapplies for type-approval for equipment for

which a type-certificate has been refused, his submission to the notified body must

include all relevant documentation, including the original test reports, the detailed

reasons for the previous refusal and details of all modifications made to the

equipment.

6. The applicant must inform the notified body that holds the technical

documentation concerning the EC type-examination certificate of all modifications

to the approved product, which must receive additional approval where such

changes may affect compliance with the requirements or the prescribed conditions

for use of the product. Such additional approval must be given in the form of an

addition to the original EC type-examination certificate.

* A type may cover several versions of the product provided that the differences between the

versions do not affect the level of safety or the other requirements concerning the perform-

ance of the product.

7. Each notified body must, on request, provide flag Member State

administrations and the other notified bodies with the relevant information

concerning the EC type-examination certificates and additions issued and

withdrawn.

8. The other notified bodies may receive copies of the EC type-

examination certificates and/or their additions. The Annexes to the certificates

must be kept at the disposal of the other notified bodies.

9. The manufacturer or his authorized representative established within the

Community must keep with the technical documentation copies of EC type-

examination certificates and their additions for at least ten years after the last

product has been manufactured.

CONFORMITY TO TYPE (MODULE C)

1. A manufacturer or his authorized representative established within the

Community must ensure and declare that the products concerned conform to type

as described in the EC type-examination certificate and satisfy the requirements of

the international instruments that apply to them. The manufacturer or his

authorized representative established within the Community must affix the mark to

each product and draw up a written declaration of conformity.

2. The manufacturer must take all measures necessary to ensure that the

manufacturing process ensures that the manufactured products conform to type as

described in the EC type-examination certificate and comply with the requirements

of the international instruments that apply to them.

3. The manufacturer or his authorized representative established within the

Community must keep a copy of the declaration of conformity for at least ten years

after the last product has been manufactured.

PRODUCTION-QUALITY ASSURANCE (MODULE D)

1. A manufacturer who satisfies the obligations of point 2 must ensure and

declare that the products concerned conform to type as described in the EC type-

examination certificate. The manufacturer or his authorized representative

established within the Community must affix the mark to each product and draw

up a written declaration of conformity. The mark must be accompanied by the

identification symbol of the notified body responsible for surveillance as specified

in point 4.

2. The manufacturer must operate an approved quality system for

production, final-product inspection and testing as specified in point 3 and must be

subject to surveillance as specified in point 4.

3. Quality system

(a)

The manufacturer must lodge an application for assessment of his

quality system with a notified body of his choice for the products concerned.

The application must include

- all relevant information for the product category envisaged,

-

the documentation concerning the quality system,

-

the technical documentation of the approved type and a

copy of the EC type-examination certificate.

(b) The quality system must ensure that the products conform to type

as described in the EC type-examination certificate.

All the elements, requirements and provisions adopted by the

manufacturer must be documented in a systematic and orderly manner in the

form of written policies, procedures and instructions. The quality-system

documentation must permit a consistent interpretation of the quality

programmes, plan, manuals and records.

It must, in particular, include an adequate description of

-

the quality objectives and the organizational structure,

responsibilities and powers of the management with regard to product

quality,

-

the manufacturing, quality-control and quality-assurance

techniques, processes and systematic actions that will be used,

-

the examinations and tests that will be carried out before,

during and after manufacture, and the frequency with which they will be

carried out,

-

the quality records, such as inspection reports and test

data, calibration data, qualification reports of the personnel concerned,

etc.,

-

the means of monitoring the achievement of the required

product quality and the effective operation of the quality system.

(c)

The notified body must assess the quality system to determine

whether it satisfies the requirements laid down in point 3(b). It must presume

compliance with those requirements in respect of quality systems that

implement the relevant harmonized standard.

The auditing team must have at least one member with

experience of assessment in the product technology concerned. The

assessment procedure must include a visit to the manufacturer's premises.

The manufacturer must be notified of the decision. The

notification must include the conclusions of the examination and the

reasoned assessment decision.

(d) The manufacturer must undertake to fulfil the obligations arising

out of the quality system as approved and to uphold it so that it remains

adequate and efficient.

The manufacturer or his authorized representative established

within the Community must keep the notified body that has approved the

quality system informed of any intended updating of that quality system.

The notified body must assess the modifications proposed and

decide whether the modified quality system will still satisfy the requirements

laid down in point 3(b) or whether a reassessment is required.

The manufacturer must be notified of its decision. The

notification must include the conclusions of the examination and the

reasoned assessment decision.

4. Surveillance under the responsibility of the notified body

(a)

The purpose of surveillance is to make sure that the manufacturer

duly fulfils the obligations arising out of the approved quality system.

(b) The manufacturer must allow the notified body access for

inspection purposes to the locations of manufacture, inspection and testing

and storage and must provide it with all necessary information, in particular

-

the quality-system documentation,

-

the quality records, such as inspection reports and test

data, calibration data, qualification reports of the personnel concerned,

etc.

(c)

The notified body must periodically carry out audits to make sure

that the manufacturer maintains and applies the quality system and must

provide the manufacturer with audit reports.

(d) In addition, the notified body may pay unannounced visits to the

manufacturer. During such visits the notified body may carry out tests or

cause tests to be carried out to check that the quality system is functioning

correctly, if necessary. The notified body must provide the manufacturer with

a visit report and, if a test has taken place, with a test report.

5. The manufacturer must, for at least 10 years after the last product has

been manufactured, keep at the disposal of the national authorities

-

the documentation referred to in the second indent of the second

paragraph of point 3(a),

-

the updating referred to in the second paragraph of point 3(d),

-

the decision and reports from the notified body referred to in the

final paragraph of point 3(d), point 4(c) and point 4(d).

6. Each notified body must, on request, provide flag Member State

administrations and the other notified bodies with the relevant information

concerning the quality-system approvals issued and withdrawn.

PRODUCT-QUALITY ASSURANCE (MODULE E)

1. A manufacturer who satisfies the obligations of point 2 ensures and

declares that the products concerned conform to type as described in the EC type-

examination certificate. The manufacturer or his authorized representative

established within the Community must affix the mark to each product and draw

up a written declaration of conformity. The mark must be accompanied by the

identification symbol of the notified body responsible for surveillance as specified

in point 4.

2. The manufacturer must operate an approved quality system for final

inspection and testing as specified in point 3 and must be subject to surveillance as

specified in point 4.

3. Quality system

(a)

The manufacturer must lodge an application for assessment of his

quality system for the products concerned with a notified body of his choice.

The application must include

-

all relevant information for the product category

envisaged,

-

the documentation concerning the quality system,

-

the technical documentation of the approved type and a

copy of the EC type-examination certificate.

(b) Under the quality system, each product must be examined and

appropriate tests must be carried out in order to ensure its compliance with

the relevant requirements of the international instruments. All the elements,

requirements and provisions adopted by the manufacturer must be

documented in a systematic and orderly manner in the form of written

policies, procedures and instructions. That quality-system documentation

must ensure common understanding of the quality programmes, plans,

manuals and records.

It must, in particular, include an adequate description of

-

the quality objectives and the organizational structure,

responsibilities and powers of the management with regard to product

quality,

-

the examinations and tests that will be carried out after

manufacture,

-

the means of monitoring the effective operation of the

quality system,

-

the quality records, such as inspection reports and test

data, calibration data, qualification reports of the personnel concerned,

etc.

(b) The notified body must assess the quality system to determine

whether it satisfies the requirements laid down in point 3(b). It must presume

compliance with those requirements in respect of quality systems that

implement the relevant harmonized standard.

The auditing team must have at least one member with experience of

assessment in the product technology concerned. The assessment procedure

must include a visit to the manufacturer's premises.

The manufacturer must be notified of the decision. The notification

must include the conclusions of the examination and the reasoned assessment

decision.

(d) The manufacturer must undertake to fulfil the obligations arising

out of the quality system as approved and to maintain it in an appropriate and

efficient manner.

The manufacturer or his authorized representative established within the

Community must keep the notified body that has approved the quality system

informed of any intended updating of that quality system.

The notified body must assess the modifications proposed and decide

whether the modified quality system will still satisfy the requirements laid

down in point 3(b) or whether a reassessment is required.

The manufacturer must be notified of its decision. The notification must

include the conclusions of the examination and the reasoned assessment

decision.

4. Surveillance under the responsibility of the notified body

(a)

The purpose of surveillance is to make sure that the manufacturer

duly fulfils the obligations arising out of the approved quality system.

(b) The manufacturer must allow the notified body access for

inspection purposes to the locations of manufacture, inspection and testing

and storage and must provide it with all necessary information, in particular

-

the quality-system documentation,

-

the technical documentation,

-

the quality records, such as inspection reports and test

data, calibration data, qualification reports of the personnel concerned,

etc.

(c)

The notified body must periodically carry out audits to make sure

that the manufacturer maintains and applies the quality system and must

provide the manufacturer with audit reports.

(d) In addition, the notified body may pay unannounced visits to the

manufacturer. During such visits the notified body may carry out tests or

cause tests to be carried out to check that the quality system is functioning

correctly, if necessary. The notified body must provide the manufacturer with

a visit report and, if a test has taken place, with a test report.

5. The manufacturer must, for at least ten years after the last product has

been manufactured, keep at the disposal of the national authorities

-

the documentation referred to in the second indent of the second

paragraph of point 3(a),

-

the updating referred to in the second paragraph of point 3(d),

-

the decision and reports from the notified body referred to in the

final paragraph of point 3(d), point 4(c) and point 4(d).

6. Each notified body must on request provide flag Member State

administrations and the other notified bodies with the relevant information

concerning the quality-system approvals issued and withdrawn.

PRODUCT VERIFICATION (MODULE F)

1. A manufacturer or his authorized representative established within the

Community must check and attest that the products subject to point 3 conform to

the type as described in the EC type-examination certificate.

2. The manufacturer must take all measures necessary to ensure that the

manufacturing process ensures that the products conform to type as described in

the EC type-examination certificate. He must affix the mark to each product and

must draw up a declaration of conformity.

3. The notified body must carry out the appropriate examinations and tests

in order to check that the product complies with the requirements of the

international instruments either by examination and testing of every product as

specified in point 4 or by examination and testing of products on a statistical basis,

as specified in point 5, at the choice of the manufacturer.

The manufacturer or his authorized representative established within the

Community must keep a copy of the declaration of conformity for at least ten years

after the last product has been manufactured.

4. Verification by examination and testing of every product

(a)

All products must be individually examined and appropriate tests

must be carried out in order to verify their conformity to type as described in

the EC type-examination certificate.

(b) The notified body must affix its identification symbol or cause it

to be affixed to each approved product and draw up a written certificate of

conformity relating to the tests carried out.

(c)

The manufacturer or his authorized representative established

within the Community must ensure that he is able to supply the notified

body’s certificate of conformity on request to the flag Member State

administration.

5. Statistical verification

(a)

The manufacturer must present his products in the form of

homogeneous lots and must take all measures necessary to ensure that the

manufacturing process ensures the homogeneity of each lot produced.

(b) All products must be available for verification in the form of

homogeneous lots. A random sample must be drawn from each lot. Products

in a sample must be individually examined and appropriate tests must be

carried out to ensure that they comply with the requirements of the

international instruments which apply to them and to determine whether the

lot is to be accepted or rejected.

(c)

In the case of accepted lots, the notified body must affix its

identification symbol or cause it to be affixed to each product and must draw

up a written certificate of conformity relating to the tests carried out. All

products in the lot may be put on the market except those products from the

sample which are found not to comply.

If a lot is rejected, the notified body or the competent authority

must take appropriate measures to ensure that that lot is not put on the

market. In the event of frequent rejection of lots the notified body may

suspend statistical verification.

The manufacturer may, under the responsibility of the notified

body, affix the latter's identification symbol during the manufacturing

process.

(d) The manufacturer or his authorized representative established

within the Community must ensure that he is able to supply the notified

body's certificates of conformity on request to the flag Member State

administration.

UNIT VERIFICATION (MODULE G)

1. The manufacturer must ensure and declare that the product concerned,

which has been issued with the certificate referred to in point 2, complies with the

requirements of the international instruments that apply to it. The manufacturer or

his authorized representative established within the Community must affix the

mark to the product and draw up a declaration of conformity.

2. The notified body must examine the individual product and carry out

appropriate tests to ensure that it complies with the relevant requirements of the

international instruments.

The notified body must affix its identification number or cause it to be

affixed to the approved product and must draw up a certificate of conformity

concerning the tests carried out.

3. The aim of the technical documentation is to enable compliance with

the requirements of the international instruments to be assessed and the design,

manufacture and operation of the product to be understood.

FULL-QUALITY ASSURANCE (MODULE H)

1. A manufacturer who satisfies the obligations of paragraph 2 must

ensure and declare that the products concerned comply with the requirements of

the international instruments that apply to them. The manufacturer or his

authorized representative established within the Community must affix the mark to

each product and draw up a written declaration of conformity. The mark must be

accompanied by the identification symbol of the notified body responsible for

surveillance as specified in point 4.

2. The manufacturer must operate an approved quality system for design,

manufacture, final-product inspection and testing as specified in point 3 and must

be subject to surveillance as specified in point 4.

3. Quality system

(a)

The manufacturer must lodge an application for assessment of his

quality system with a notified body.

The application must include

-

all relevant information for the product category

envisaged, and

-

documentation concerning the quality system,

(b) The quality system must ensure that the products comply with the

requirements of the international instruments that apply to them.

All the elements, requirements and provisions adopted by the

manufacturer must be documented in a systematic and orderly manner in the

form of written policies, procedures and instructions. The quality system

documentation must ensure common understanding of the quality policies

and procedures such as quality programmes, plans, manuals and records.

It must, in particular, include an adequate description of

-

the quality objectives and the organizational structure,

responsibilities and powers of the management with regard to product

quality,

-

the technical design specifications, including standards,

that will be applied and the assurance that the essential requirements of

the international instruments that apply to the product will be met,

-

the design control and design verification techniques,

processes and systematic actions that will be used in the design of the

products pertaining to the product category covered,

-

the corresponding manufacturing, quality control and

quality assurance techniques, processes and systematic actions that will

be used,

-

the examinations and tests that will be carried out before,

during and after manufacture, and the frequency with which they will be

carried out,

-

the quality records, such as inspection reports and test

data, calibration data, qualification reports of the personnel concerned,

etc,

-

the means of monitoring the achievement of the required

design and product quality and the effective operation of the quality

system.

(c)

The notified body must assess the quality system to determine

whether it satisfies the requirements laid down in point 3(b). It must presume

compliance with those requirements in respect of quality systems that

implement the relevant harmonized standard.

The auditing team must have at least one member with

experience of assessment in the product technology concerned. The

assessment procedure must include a visit to the manufacturer's premises.

The manufacturer must be notified of the decision. The

notification must include the conclusions of the examination and the

reasoned assessment decision.

(d) The manufacturer must undertake to fulfil the obligations arising

from the quality system as approved and to uphold it so that it remains

adequate and efficient.

The manufacturer or his authorized representative established

within the Community must keep the notified body that has approved the

quality system informed of any intended updating of that quality system.

-

The notified body must assess the modifications proposed and

decide whether the modified quality system will still satisfy the requirements

laid down in point 3(b) or whether a reassessment is required.

-

The manufacturer must be notified of its decision. The

notification must include the conclusions of the examination and the

reasoned assessment decision.

4. EC Surveillance under the responsibility of the notified body

(a)

The purpose of surveillance is to make sure that the manufacturer

duly fulfils the obligations arising out of the approved quality system.

(b) The manufacturer must allow the notified body access for

inspection purposes to the locations of design, manufacture, inspection and

testing and storage and must provide it with all necessary information, in

particular

-

the quality-system documentation,

-

the quality records as provided for in the design part of the

quality system, such as the results of analyses, calculations, tests, etc,

-

the quality records as provided for in the manufacturing

part of the quality system, such as inspection reports and test data,

calibration data, qualification reports of the personnel concerned, etc.

(c)

The notified body must periodically carry out audits to make sure

that the manufacturer maintains and applies the quality system and must

provide the manufacturer with audit reports.

(d) In addition, the notified body may pay unannounced visits to the

manufacturer. During such visits the notified body may carry out tests or

cause tests to be carried out to check that the quality system is functioning

correctly, if necessary. The notified body must provide the manufacturer with

a visit report and, if a test has taken place, with a test report.

5. The manufacturer must, for at least 10 years after the last product has

been manufactured, keep at the disposal of the national authorities

-

the documentation referred to in the second indent of the second

paragraph of point 3(a),

-

the updating referred to in the second paragraph of point 3(d),

-

the decision and reports from the notified body referred to in the

final paragraph of point 3(d), point 4(c) and point 4(d).

6. Each notified body must on request provide flag Member State

administrations and the other notified bodies with the relevant information

concerning the quality-system approvals issued and withdrawn.

7. Design examination

(a)

The manufacturer must lodge an application for examination of

the design with a single notified body.

(b) The application must make it possible to understand the design,

manufacture and operation of the product and to assess compliance with the

requirements of international instruments.

It must include

-

the technical design specifications, including standards,

that have been applied, and

-

the necessary supporting evidence for their adequacy, in

particular where the standards specified in regulations 5(1) to 5(3) of

these regulations have not been applied in full. Such supporting

evidence must include the results of tests carried out by an appropriate

laboratory of the manufacturer’s or on his behalf.

(c)

The notified body must examine the application and where the

design complies with those provisions of the international instruments that

apply it must issue an EC design-examination certificate to the applicant. The

certificate must include the conclusions of the examination, the conditions of

its validity, the data necessary for identification of the approved design and,

if relevant, a description of the product's functioning.

(d) The applicant must keep the notified body that has issued the EC

design-examination certificate informed of any modification to the approved

design. Modifications to the approved design must receive additional

approval from the notified body that issued the EC design-examination

certificate where such changes may affect compliance with the relevant

requirements of the international instruments or the prescribed conditions for

use of the product. Such additional approval must be given in the form of an

addition to the original EC design-examination certificate.

(e)

The notified bodies must, on request, provide flag Member State

administrations and the other notified bodies with the relevant information

concerning

-

the EC design examination certificates and additions

issued, and

-

the EC design approvals and additional approvals

withdrawn.

Appendix to Schedule II

(Based on Appendix to Annex B of Directive 96/98/EC)

Technical documentation to be supplied by the manufacturer to the notified body

1. The provisions set down in this Appendix apply to all modules of

Schedule II.

2. The technical documentation referred to in Schedule II must comprise

all relevant data and means used by the manufacturer to ensure that equipment

complies with the essential requirements relating to it.

3. The technical documentation must make it possible to understand the

design, manufacture and operation of the product, and must make it possible to

assess compliance with the requirements of the relevant international instruments.

4. The documentation must, so far as they are relevant to assessment,

include

a general description of the type,

conceptual design, build standard and manufacturing drawings

and schemes of components, sub-assemblies, circuits, etc,

descriptions and explanations necessary for the understanding of

those drawings and schemes, including the operation of the product,

the results of design calculations made, impartial examinations

carried out, etc,

impartial test reports,

manuals for installation, use and maintenance.

5. Where appropriate, the design documentation must contain the

attestations relating to the equipment incorporated in the

appliance,

attestations and certificates relating to the methods of

manufacture or inspection or monitoring of the appliance,

any other document that makes it possible for the notified body to

improve its assessment.

Schedule III

(Based on Annex C of Directive 96/98/EC)

[Regulation 7(1), (3) and (4)]

Minimum criteria to be taken into account by Member States

for the designation of bodies

1. Notified bodies shall be subject to the Method for Designating

Conformity Assessment Bodies Regulations, and they shall also fulfil the criteria

set out below.

2. Notified bodies must fulfil the requirements of the relevant EN 45000

series.

3. A notified body must be independent and must not be controlled by

manufacturers or by suppliers.

4. A notified body must be established within the territory of the

Community.

5. Where type-approvals are issued by a notified body on behalf of a

Member State, the Member State must ensure that the qualifications, technical

experience and staffing of the notified body are such as will enable it to issue type-

approvals which comply with the requirements of this Directive and to guarantee a

high level of safety.

6. A notified body must be in a position to provide maritime expertise.

7. A notified body is entitled to perform conformity-assessment

procedures for any economic operator established within or outwith the

Community.

8. A notified body may perform conformity-assessment procedures in any

Member State or State outwith the Community using either its home-based means

or the personnel of its branch office abroad.

9. If a subsidiary of a notified body performs conformity-assessment

procedures, all documents relating to the conformity-assessment procedures must

be issued by and in the name of the notified body and not in the name of the

subsidiary.

10. A subsidiary of a notified body which is established in another Member

State may, however, issue documents relating to conformity-assessment

procedures if it is notified by that Member State.

Schedule IV

(Based on Annex D of Directive 96/98/EC)

[Regulations 3 and 6(3)]

Mark of conformity

The mark of conformity must take the following form

If the mark is reduced or enlarged the proportions given in the above

graduated drawing must be respected.

The various components of the mark must have substantially the same

vertical dimension, which may not be less than 5 mm.

That minimum dimension may be waived for small devices.

Need to analyze how this provision applies to your matter?

Cross-reference this statute against case law, commentaries, and related legislative provisions inside Legislator AI.

Open in Legislator →