Construction Products (Amendment) Regulations, 2008

Suppliment tal-Gazzetta tal-Gvern ta’ Malta, Nru. 18,176, 22 ta’ Jannar, 2008

Taqsima B

L.N. 25 of 2008

PRODUCT SAFETY ACT

(CAP. 427)

Construction Products (Amendment) Regulations, 2008

IN exercise of the powers conferred by articles 38 to 40 of the

Product Safety Act, the Minister for Competitiveness and

Communications, on the advice of the Malta Standards Authority, has

made the following regulations>–

The title of these regulations is the Construction Products Citation.

(Amendment) Regulations, 2008 and they shall be read and construed

as one with the Construction Products Regulations, 2001, hereinafter L.N. 270 of 2001.

referred to as “the principal regulations”.

For Schedule III to the principal regulations, there shall be Amends Schedule

III to the principal

substituted the following>

regulations.

“Schedule III

Comprehensive table of legal measures taken related to the Construction

Products Directive 89/106/EEC

Official Journal

Measure

Common procedural rules for European Technical

Approval (ETA)

Communication of the Commission with regard to the

interpretative documents of Council Directive C62

89/106/EEC

Communication of the Commission as part of the

implementation of Council Directive 89/106/EEC on

construction products as amended by Directive C206

93/68/EEC

Publication for information purposes of the names of

bodies authorised

to

issue

European

Technical

Approvals

Communication of the Commission as part of the

implementation of Council Directive 89/106/EEC on

construction products as amended by Directive

93/68/EEC

Publication for information purposes of the names of

bodies authorised to issue European Technical

Approvals

Commission Decision of 4 October 1996 establishing

the list of products belonging to class A 'No

contribution to Fire' provided for in Decision 94/611/EC L267

implementing Article 20 of Council Directive

89/106/EEC on construction products

Commission Decision of 22 July 1997 on the general

format of European Technical Approval for L236

Construction Products

Communication of the Commission as part of the

implementation of Council Directive 89/106/EEC on

construction products as amended by Directive

93/68/EEC

Publication for information purposes of the names of

bodies authorised to issue European Technical

Approvals

Commission Decision of 3 July 1998 concerning the

Test of the Single Burning Item (SBI) referred to in

Decision 94/611/EC implementing Article 20 of L201

Council Directive 89/106/EEC on construction products

(notified under document number C(1998) 1743)

Commission Decision of 8 February 2000 implementing

Council Directive 89/106/EEC as regards the

classification of the reaction to fire performance of

construction products 2

Commission Decision of 27 March 2000 on the

procedure for attesting the conformity of construction L086 07/04/2000

products pursuant to Article 20(2) of Commission

1 As amended by Corrigendum published in OJ No. L156/60 of 13/06/1997 and by Commission

Decision 2000/605/EC published on OJ No. L258 of 12/10/2000 and Commission Decision

2003/424/EC published in OJ No. L144 of 12/06/2003.

2 As amended by (Corrigendum) published in OJ No. L085/43 of 24/03/2001 and Commission

Decision 2003/632/EC published in OJ No. L220 of 03/09/2003.

Directive 89/106/EEC as regards seven products for

European Technical Approvals without Guideline

Commission Decision of 3 May 2000 implementing

Council Directive 89/106/EEC as regards the

classification of the resistance to fire performance of L133 06/06/2000

construction products, construction works and parts

thereof 3

Commission Decision of 9 September 2000

implementing Council Directive 89/106/EEC as regards L235 19/09/2000

the external fire performance of roof coverings

Commission Decision of 26 September 2000 amending

Decision 96/603/EC establishing the list of products

belonging to Classes A ‘No contribution to fire’

provided for in Decision 94/611/EC implementing

Article 20 of Council Directive 89/106/EEC on

construction products

Commission Decision of 21 August 2001 implementing

Council Directive 89/106/EEC as regards the

classification of the external fire performance of roofs

and roof coverings

Commission Decision of 17 January 2003 establishing

the classes of reaction-to-fire performance for certain L013 18/01/2003

construction products 4

Commission Decision of 6 June 2003 amending

Decision 96/603/EC establishing the list of products

belonging to Classes A ‘No contribution to fire’

provided for in Decision 94/611/EC

Commission Decision of 7 August 2003 amending

Decision 2003/43/EC establishing the classes of

reaction-to-fire performance of certain construction

products

Commission Decision of 26 August 2003 amending

Decisison

2000/147/EC

implementing

Council

Directive 89/106/EEC as regards the classification of L220 03/09/2003

the reaction-to-fire performance of construction

products

3 As amended by Commission Decision 2003/629/EC published in OJ No. L218 of 30/08/2003 and by

(Corrigendum) published in OJ No. L219 of 14/08/2001.

4 As amended by Commission Decision 2003/593/EC of 7 th August 2003 published in OJ No. L201 of

08/08/2003 and by (Corrigendum) published in OJ No. L33 of 08/02/2003.

Commission Decision of 12 September 2003 on the

procedure for attesting the conformity of construction

products pursuant to Article 20(2) of Council Directive L231 17/09/2003

89/106/EEC as regards seven products for European

Technical approvals without Guideline

Commission Decision of 27 August 2003 amending

Decision 2000/367/EC establishing a classification

system for resistance-to-fire performance for L218 30/08/2003

construction products, as regards the inclusion of smoke

and heat control products

Commission Communication in the framework of the

implementation of the Council Directive 89/106/EEC

Commission Decision of 6 March 2006 establishing the

classes of reaction-to-fire performance for certain

construction products as regards wood flooring and

solid wood panelling and cladding

For harmonised standards

Decision Number Products covered

Precast concrete products, Thermal Insulating products,

Membranes, Doors, Windows and related products 5

Gypsum products, Structural Bearings, Chimneys,

Flues and specific products 6

Fixed Fire fighting systems

Sanitary appliances

Circulation Fixtures 7

Curtain walling

Geotextiles

5 As amended by Corrigendum published in OJ No. L217/31 of 13/09/1995.

6 As amended by Corrigendum published in OJ No. L070/44 of 20/03/1996.

7 As amended by Commission Decision 1999/453/EC of 18 th June 1999 published in OJ No. L178/50

* Amended by Commission Decision 2001/596/EC of 8 th January 2001 published in OJ No. L209 of

Structural timber products

Wood based panels 8

Waste water engineering products 9

Cement, Building limes and other hydraulic binders

Reinforcing and prestressing steel for concrete

Fasteners for Structural timber

Masonry products

Floorings 5

Structural metallic products and ancillaries

Roof coverings,

rooflights,

roof

windows

and

ancillary 10

Internal and external wall and ceiling finishes 11

Aggregates

Road construction products

Membranes (revision of decision 95/204/EC) 12

Thermal insulating products (revision of decision

95/204/EC) 10

Doors, windows, shutter, blinds, gates and related

building hardware (revision of decision 95/204/EC) 10

Precast normal/lightweight/autoclaved aerated concrete

products (revision of decision 95/204/EC) 10

Commission Decision of 18 June 1999 amending

Decisions 96/579/EC and 97/808/EC on the procedure

for attesting the conformity of construction products L178

pursuant to Article 20(2) of Council Directive

89/106/EEC as regards circulation fixtures and

8 As amended by Corrigendum L017/46 of 21/01/1998.

9 As amended by Commission Decision 2004/663/EC of 20 th September 2004 published in OJ No.

L302 of 29/09/2004.

10 As amended by Corrigendum published in OJ No. L168/36 of 03/07/1999.

11 As amended by Corrigendum published in OJ No. L278/51 of 15/10/1998.

12 As amended by Corrigendum published in OJ No. L083/80 of 27/03/1999.

floorings respectively

Products related to concrete, mortar and grout

Construction Adhesives

Space heating appliances

Pipes, tanks and ancillaries not in contact with water

intended for human consumption

Flat glass, profiled glass and glass block products

Commission Decision of 8 January 2001 amending

Decisions

95/467/EC,

96/578/EC,

96/580/EC,

97/176/EC, 97/462/EC, 97/556/EC, 97/740/EC,

97/808/EC, 98/213/EC, 98/214/EC, 98/279/EC,

98/436/EC, 98/437/EC, 98/599/EC, 98/600/EC,

98/601/EC, 1999/89/EC, 1999/90/EC, 1999/91/EC, L209 02/08/2001

1999/454/EC,

1999/469/EC,

1999/470/EC,

1999/471/EC,

1999/472/EC,

2000/245/EC,

2000/273/EC and 2000/447/EC on the procedure for

attesting the conformity of certain construction products

pursuant to Article 20 of Council Directive 89/106/EEC

Construction products in contact with water intended

for human consumption

Commission Decision of 15 July 2002 amending

Decisions 95/467/EC, 96/577/EC, 96/578/EC and

98/598/EC on the procedure for attesting the conformity

of construction products pursuant to Article 20(2) of L192 20/07/2002

Council Directive 89/106/EEC as regards gypsum

products, fixed fire-fighting systems, sanitary

appliances and aggregates respectively

Thermal insulation products, geotextiles, fixed fire-

fighting equipment and gypsum blocks

Floorings

Decision Number Description

Official Journal

Structural Sealant Glazing Systems and Metal Anchors

for Concrete (Heavy duty uses)

Metal Anchors for use in concrete for fixing lightweight

systems

Metal Anchors for Masonry

Plastic Anchors for use in Concrete and Masonry

External thermal insulation composite systems/Kits

with rendering (ETICS)

Mechanically fastened flexible roof waterproofing

membranes

Internal partition kits

Non-load-bearing permanent shuttering kits/systems

Post tensioning kits for the prestressing of structures 13

Liquid applied roof waterproofing kits

Self-supporting translucent roof kits (except glass-

based kits)

Prefabricated stair kits

Light composite wood-based beams and columns

Fire stopping, fire sealing and fire protective products

Timber frame and log prefabricated building kits

Prefabricated wood-based load-bearing stressed skin

panels and self-supporting composite lightweight L180 19/07/2000

panels

Six products for European Technical Approvals without

Guideline

Expansion joints for road bridges

Vetures

Metal frame building kits, concrete frame building kits,

prefabricated building units, cold storage room kits and L262 14/10/2003

rock-fall protection kits

Liquid-applied bridge deck waterproofing kits

13 As amended by Corrigendum published in OJ No. L313 of 21/11/1998.

Pins for structural joints

Kits for exterior wall claddings

Watertight covering kits for wetroom floors and walls

Cold storage building kits and cold storage building

envelope kits

For Schedule IV to the principal regulations, there shall be substituted

the following

“Schedule IV

Description

Metal anchors for use in Concrete Part 1: Anchors in

general

Metal anchors for use in Concrete Part 2: Torque-

controlled expansion anchors

Metal anchors for use in Concrete Part 3: Undercut

anchors

Metal anchors for use in Concrete Part 4: Deformation-

controlled expansion anchors

Metal anchors for use in Concrete Part 5: Bonded

anchors

Metal anchors for use in concrete Part 56: Anchors for

multiple use for non-structural applications

Structural sealant glazing systems Part 1: Supported

and unsupported systems

Structural sealant glazing systems Part 2: Coated

aluminium systems

Structural sealant glazing systems Part 3: Thermal

breaks

Internal partition kits for use as non loadbearing walls

External thermal insulation composite systems with

rendering

Liquid applied roof waterproofing kits

Systems of mechanically fastened flexible roof

14 The full text of the ETAGs may be downloaded from the EOTA website (http://www.eota.be) under

‘Endorsed ETAG’s’.

waterproofing membranes

Timber-frame building kits

Prefabricated stairs kits

Non-load-bearing permanent shuttering kits/systems

based on hollow blocks or panels of insulating

materials and sometimes concrete

Self supporting translucent roof kits

Light composite wood-based beams and columns

Log building kits

Post tensioning kits for pre-stressing of structures

Plastic anchors for ETICS

Three dimensional nailing plates

Composite light weight panels Part 1

Composite light weight panels Part 2

Composite light weight panels Part 3

Composite light weight panels Part 4

Veture Kits

Fire protective products Part 1: General

Fire protective products Part 2: Reactive coatings for

fire protection of steel elements

Fire protective products Part 3: Renderings and

Rendering Kits intended for Fire Resisting

Applications

Fire protective products Part 4: Fire protective board,

slab and mat products and kits

Pre-fabricated wood-based loadbearing stressed skin

panels

Plastic anchors for multiple use in concrete and

masonry for non-structural applications Part 1: General

Plastic anchors for multiple use in concrete and

masonry for non-structural applications Part 2: Plastic

anchors for use in normal weight concrete

Plastic anchors for multiple use in concrete and

masonry for non-structural applications Part 3: Plastic

anchors for use in solid masonry

Plastic anchors for multiple use in concrete and

masonry for non-structural applications Part 4: Plastic

anchors for use in hollow perforated masonry

Plastic anchors for multiple use in concrete and

masonry for non-structural applications Part 5: Plastic

anchors for use in autoclaved aerated concrete

Plastic anchors for multiple use in concrete and

masonry for non-structural applications Annex A

Details of tests

Plastic anchors for multiple use in concrete and

masonry for non-structural applications Annex B

Recommendations for tests to be carried out on

construction works

Plastic anchors for multiple use in concrete and

masonry for non-structural applications Annex C

Design methods for anchorages

Cold Storage Premises kits Part 1: Cold Storage Room

Kits Part 2: Cold Storage Building Envelope and

Building Kits Annexes Part 1

Concrete Frame Building Kits

Metal Frame Building Kits

Issued ETAs by virtue of the above guidelines

Description

Torque-controlled expansion anchor made of

galvanized steel of sizes M8, M10, M12, M16, M20

and M24 for use in concrete

Torque-controlled expansion anchor made of stainless

steel of sizes M8, M10, M12, M16, M20 and M24 for

use in concrete

Torque-controlled expansion anchor, made of zinc

electroplated steel, for use in concrete: sizes M8, M10,

M12, M16 and M20.

Undercut anchor made of galvanized steel of sizes M6,

M8, M10, M12 and M16 for use in concrete.

Undercut anchor made of stainless steel of sizes M6,

M8, M10, M12 and M16 for use in concrete.

Thermal and/or acoustic insulation boards and thermal

and/or acoustic insulation material made of flax, jute

and polyester fibres

Torque-controlled expansion anchor, made of zinc

electroplated steel, for use in non cracked concrete

sizes M8, M10, M12, M16 and M20

Torque-controlled expansion anchor, made of

galvanised steel, for use in non cracked concrete: sizes

M6, M8, M10, M12, M16 and M20

Torque-controlled expansion anchor, made of zinc

electroplated steel, for use in concrete: sizes M8, M10,

M12 and M16

Torque-controlled expansion anchor made of

galvanized steel of sizes M6, M8, M10, M12 and M16

for use in concrete

Special anchor made of stainless steel for the fastening

of additional securing in a permanent manner of

external weather resistant skins of three-layer external

wall panels made of concrete

Torque-controlled expansion anchor, made of stainless

steel, for use in non-cracked concrete: sizes M6, M8,

M10 and M12.

Self-cutting undercut anchor, made of galvanised steel,

for use in concrete: sizes M10, M12 and M16.

Torque controlled expansion anchor made of stainless

steel of sizes M8, M10, M12 and M16 for use in

concrete.

Torque controlled expansion anchor made of stainless

steel of sizes M8,M10,M12 and M16 for use in

concrete

Trap with partially mechanical closure, mounted in a

non-trapped gully.

Torque controlled expansion anchor made of zinc

electroplated steel, for use in non-cracked concrete

sizes M8, M10, M12, M16 and M20

Torque controlled expansion anchor made of

galvanized steel of sizes M10, M12 and M16 for use in

concrete.

Permanent insulating shuttering kit for whole buildings

Partition wall kit for sanitary applications

Torque controlled expansion anchor made of stainless

steel of sizes M8, M10, M12 and M16 for use in

concrete

Torque controlled expansion anchor made of

galvanised steel of sizes M8, M10, M12 and M16 for

use in concrete

Torque controlled expansion anchor made of coated

steel of sizes M8, M10 and M12 for use in concrete

Torque-controlled expansion anchor, made of stainless

steel, for use in non cracked concrete: sizes M8, M10,

M12 and M16

Torque-controlled expansion anchor, made of

galvanised steel, for use in non cracked concrete: sizes

M8, M10, M12 , M16 & M20

Torque controlled expansion anchor, made of stainless

steel, for use in non cracked concrete: size M8

Powder actuated fastener for the fixing of bonded

thermal insulation composite systems in uncoated

concrete

Torque-controlled expansion anchor, made of

galvanised steel, for use in cracked or non cracked

concrete sizes M8, M12 and M16

Torque-controlled expansion anchor, made of

galvanised steel, for use in non cracked concrete: sizes

M6, M8, M10 and M12

Torque controlled expansion anchor made of

galvanised steel of sizes M8, M10, M12, M16, and

M20 for use in non-cracked concrete

Torque controlled expansion anchor, made of

galvanized steel, for use in non cracked concrete: sizes

M6, M8, M10, M12 and M16

Torque controlled expansion anchor made of stainless

steel of sizes M8, M10, M12 and M16 for use in

concrete

Loose fill thermal and/or acoustic material made of

hemp fibres

Torque-controlled expansion anchor made of

galvanised

steel of sizes M8, M10, M12, M16 and M20 for use in

non-cracked concrete

Torque controlled expansion Anchor with internal

thread made of stainless steel of sizes M6, M8, M10

and M 12 for use in concrete

Torque controlled expansion anchor, made of

galvanised steel, for use in non-cracked concrete: sizes

M6, M8, M10, M12 and M16

Torque controlled expansion anchor, made of

galvanised steel, for use in cracked and non-cracked

concrete: sizes M8, M10 and M12

Undercut anchor made of stainless steel 1.459 of sizes

M6, M8, M10, M12 and M16 for use in concrete

PEIKKO HPM/L anchor bolt for the connection of

prefabricated reinforced concrete columns

Bonded anchor made of galvanised steel for use in non

cracked concrete: sizes M8, M10, M12, M16, M20,

M27 and M30

Thermal and/or acoustic insulation board made of

hemp fibres

Thermal and/or acoustic insulation board made of

hemp fibres

Thermal and/or acoustic insulation board made of

hemp fibres

Thermal and/or acoustic insulation board made of

hemp fibres

Impact sound insulation material in form of boards

made of hemp fibres

Impact sound insulation material in form of boards

made of hemp fibres

Thermal and/or acoustic insulation boards, mats made

of hemp fibres

Thermal and/or acoustic insulation boards, mats made

of hemp fibres

Self-cutting undercut anchor, made of stainless steel,

for use in concrete: sizes M10, M12 and M16

Torque controlled expansion anchor with internal

thread made of stainless steel of sizes M6, M8, M10

and M12 for use in concrete

Screwed-in anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

Screwed-in anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

Deformation-controlled expansion anchor made of

galvanised steel of sizes M8, M10, M12, M16 and M20

for use in non-cracked concrete

Bonded anchor (injection type) with anchor made of

galvanised steel of sizes M6, M8, M10, M12, M16,

M20, M24 and M30 for use in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel of sizes M6, M8, M10, M12, M16,

M20, M24 and M30 for use in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel 1,4529 of sizes M6, M8, M10, M12,

M16, M20, M24 and M30 for use in non-cracked

concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel of sizes M6, M8, M10, M12, M16,

M20, M24 and M30 for use in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel 1,4529 of sizes M6, M8, M10, M12,

M16, M20, M24 and M30 for use in non-cracked

concrete

Light composite wood-based beam and column for

structural purposes

Self-cutting undercut anchor, made of galvanised steel,

for use in concrete: sizes M6, M8, M10 and M12

Self-cutting undercut anchor, made of stainless steel,

for use in concrete: sizes M6, M8, M10 and M12

Torque controlled expansion anchor made of stainless

steel 1,4529/1,4565 of sizes M8, M10, M12 and M16

for use in concrete

Torque controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10, M12 and M16

for use in concrete

Torque controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10, M12 and M16

for use in concrete

Deformation-controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10, M12, M16 and

M20 for use in non-cracked concrete

Deformation-controlled expansion anchor made of

stainless steel of sizes M8, M10, M12, M16 and M20

for use in non-cracked concrete

Thermal and/or acoustic insulation board made of

hemp fibres

Impact sound material in form of boards made of hemp

fibres

Thermal and/or acoustic insulation boards, mats made

of hemp fibres

Torque controlled expansion anchor, made of stainless

steel for use in non cracked concrete: sizes M6, M8,

M10, M12 and M16

Thermal and/or acoustic insulation board made of

hemp fibres

External Thermal Insulation Composite System with

rendering for use as external insulation for building

walls

Bonded anchor made of stainless steel for use in non

cracked concrete: sizes M8, M10, M12, M16, M20,

M24, M27 and M30

Bonded anchor made of high corrosion resistant steel

for use in non cracked concrete: sizes M8, M10, M12,

M16, M20, M27 and M30

Torque controlled anchor, made of galvanised steel, for

use in concrete: sizes M8, M11, M12, M16, M20 and

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M6, M8, M10, M12, M24

and M30 for use in non cracked concrete

Deformation controlled expansion anchor made of

galvanised steel of sizes M8, M10, M12, M16 and M20

for use in non-cracked concrete

Torque controlled expansion anchor, made of

galvanised steel, for use in non cracked concrete: sizes

M8, M10, M12, M16 and M20

Torque controlled expansion anchor, made of stainless

steel, for use in non cracked concrete: sizes M8, M10,

M12 and M16

Torque controlled expansion anchor, made of

galvanised steel, for use in non cracked concrete: sizes

M8, M10, M12, M16 and M20

Torque controlled expansion anchor, made of stainless

steel, for use in non cracked concrete: sizes M8, M10,

M12 and M16

Lightweight relocatable partition kit

Sealant used in structural and non-structural edge seal

of insulated-glass unit for use in structural sealant

glazing systems

Powder actuated fastener for the fixing of bonded

thermal insulation composite systems in uncoated

concrete

Anchor for fixing of external thermal insulation

composite systems with rendering for use in concrete

and masonry

The insulating dry floor finishing systems with

Fermacell flooring elements are intended for use in

new build and existing (refurbishment) houses and

other buildings for raising the height of floors or

leveling out uneven floors. They can only be used on

structural floors which provide overall support to the

flooring elements. The floor finishing systems are not

intended to be used without a floor covering.

Internal partition kit with large-sized panels of

autoclaved aerated concrete (AAC) (thickness 70 and

100 mm) for use as non-loadbearing walls

Bonded anchor made of galvanized steel for use in non

cracked concrete sizes: M8, M10, M12, M16, M20,

M24 and M30

Bonded anchor made of stainless steel for use in non

cracked concrete sizes: M8, M10, M12, M16, M20,

M24 & M30

External Thermal Insulation Composite System

Torque controlled expansion anchor made

of

galvanised steel of sizes M8, M10, M12 and M16

Polypropylene cavity trays for use as a damp-proof

course in cavity walls with an outer leaf of brickwork,

or in timber-framed constructions, with a masonry

cladding or skin

Log building kit

Timber frame building kit

Torque controlled expansion anchor made of

galvanised steel of sizes M8, M10, M12 and M16 for

use in concrete

Torque controlled expansion anchor made of

galvanised steel of sizes M8, M10, M12 and M16 for

use in concrete

Nailed-in plastic anchor for fixing of thermal insulation

composite system with rendering in concrete and

masonry

Liquid applied roof waterproofing on the basis of

flexible reactive polymethylmethacylate

Liquid applied roof waterproofing on the basis of

flexible unsaturated polyester

External thermal insulation systems

External thermal insulation systems

External thermal insulation systems

Liquid applied roof waterproofing on the basis of

flexible unsaturated polyester

Liquid applied roof waterproofing on the basis of

flexible unsaturated polyester

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Nailed in plastic anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonsry

Impact sound insulation material in form of boards

made of hemp fibres

Thermal insulation material in form of boards exposed

to compression loads made of hemp shives

Deformation-controlled expansion anchor made of

stainless steel of sizes M6, M8x30, M8x40, M10, M12,

M16 and M20 for use in non-cracked concrete

Torque controlled bonded anchor with anchor rod made

of galvanised steel of sizes M10/75, M12/95, M16/105,

M16/125 and M20/170 for use in concrete

Torque controlled bonded anchor with anchor rod made

of stainless steel of sizes M10/75, M12/95, M16/105,

M16/125 and M20/170 for use in concrete

Torque controlled bonded anchor with anchor rod made

of high corrosion resistant steel of sizes M10/75,

M12/95, M16/105, M16/125 and M20/170 for use in

concrete

Thermal and/or acoustic insulation product made of

sheep’s wool “alchimealana Dämmvlies” for building

applications

Post-tensioning kit for prestressing of structures with

unbonded monostrands for concrete

Structural sealant for use in structural sealant glazing

systems

Steel plate with cast-in KÖCO headed studs made of

steel

Steel plate with cast-in KÖCO headed studs made of

steel

Steel plate with cast-in Nelson headed studs made of

steel

Steel plate with cast-in Nelson headed studs made of

stainless steel

Liquid applied roof waterproofing on the basis

polyurethane (one-component)

Liquid applied roof waterproofing on the basis of

polyurethane (two-component)

Structural sealant glazing kit for use in curtain walling

Thermal insulation material in form of boards exposed

to compression loads made of hemp shives

Thermal insulation material in form of boards exposed

to compression loads made of hemp shives

Thermal insulation material in form of boards exposed

to compression loads made of hemp shives

Fibre gypsum boards used for planking and lining of

components

Deformation-controlled expansion anchor made of

stainless steel of sizes M6, M8x30, M8x40, M10, M12,

M16 and M20 for use in non-cracked concrete

Liquid applied roof waterproofing using kits based on

polyurethane

Liquid applied roof waterproofing on the basis of an

elasticised solvent free thermosetting plastic with

elatomeric fillers

Liquid Applied Roof Waterproofing Kits based on

water dispersible polymers (LARWK)

Special anchor for the fixing of façade plates from their

back side made of dust-pressed ceramic plates

(stoneware) according to EN176

Wood-based I-shaped composite beams and columns

for structural purposes

Thermal insulation board made of cellulose &

polyester fibres

External Thermal Insulation Composite System

Liquid applied roof waterproofing on the basis of

polyurethane

Fastening element made of stainless steel

Non-load bearing partition kit for dry and wet rooms

Torque controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10 & M12 for use

in non-cracked concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Torque-controlled expansion anchor made of stainless

steel for use in concrete sizes: M8, M10, M12 & M16

Deformation-controlled expansion anchor made of

galvanised steel of sizes M8, M10 and M12 for use in

non-cracked concrete

Light composite wood-based beams and columns for

structural purposes

Annular ringed shank nails and connector

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Liquid applied roof waterproofing on the basis of

flexible reactive polymethylmethacrylate

Liquid Applied Roof waterproofing on the basis of

polyurethane

Liquid Applied Roof waterproofing on the basis on

water dispersible polymers

Light Composite Wood-based Beam

Screwed-in anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

Liquid Applied roof waterproofing on the basis of

polymer modified bitumen emulsion

Anchor made of galvanised steel for multiple use for

non-structural applications in concrete

Anchor made of galvanised steel of size K6 L for

multiple use for non-structural applications in concrete

Bonded anchor(injection type) with anchor rod or

internal sleeve made of galvanised steel of sizes M8,

M10, M12, M16, M20, M24, M27and M30 for use in

non-cracked concrete

Bonded anchor(injection type) with anchor rod or

internal sleeve made of stainless steel of sizes M8,

M10, M12, M16, M20, M24, M27and M30 for use in

non-cracked concrete

Bonded anchor(injection type) with anchor rod made of

high corrosion resistant steel of sizes M8, M10, M12,

M16, M20, M24, M27and M30 for use in non-cracked

concrete

Nailed -in plastic anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

Torque controlled expansion anchor with internal

thread made of stainless steel 1.4529/1.4547 of sizes

M8, M10, M12 and M16 for use in concrete

Nailed-in plastic anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

External Thermal Insulation Composite Systems with

rendering

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Liquid applied

waterproofing

on

the

basis

of

polyurethane

Liquid applied roof waterproofing on the basis of

polyurethane

External Thermal Insulation Composite System with

renderings for the use as external insulation to the walls

of buildings

Prefabricated tension rod system

Prefabricated tension rod system

Glued laminated wood-based beams and columns for

structural purposes

Bitumen shingles with cellulose reinforcement

Three-dimensional Nailing plate (Timber to timber

joist hanger)

Anchor made of galvanised steel of size HK L for

multiple use for non-structural applications in concrete

"WESTEC Joint sealing Bands PE" used in plants for

the containment, handling and filling of substances

hazardous to water

Structural sealant glazing system for use in curtain

walling

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Boards made of flax fibres for thermal insulation

and/or sound absorption

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Liquid applied composite waterproofing for inverted

roofs on the basis of hot-applied polymer-modified

bitumen

and

polymerbitumen

sheeting

for

waterproofing of roofs

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Emergency Escape Door Security Bolt

External Thermal Insulation Composite System

(ETICS) with rendering on mineral wool for the use as

external insulation to the walls of buildings

Liquid applied roof waterproofing using kits based on

polyurethane

Liquid applied roof waterproofing using kits based on

polyurethane

Cast-in steel plate with weld joint Teräspeikko-Anchor

bolts made of steel

Torque controlled expansion anchor made of

galvanised steel of sizes M8, M10, M12, and M16 for

use in concrete

Torque controlled expansion anchor made of stainless

steel of sizes M8, M10, M12 and M16 for use in

concrete

Timber frame construction kits for low rising housing

and similar building structures

Torque-controlled expansion anchor, made of

galvanised steel, for use in non cracked concrete: sizes

M8, M10, M12, M16 and M20

External Thermal Insulation Composite System with

renderings for the use as external insulation to the walls

of buildings

External Thermal Insulation Composite systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Hilti powder actuated fasteners ENP2-21L15, ENP2-

21L15MX,

ENP2-21L15MXR,

ENPH2-21L15,

ENPH2-21L15MX,

ENPH2-21L15MXR

in

combination with Hilti fastening tools DX 750, DX 750

MX, DX A70 R for fastening of steel sheeting to steel

members

Screwed- in plastic anchor for fixing of external

thermal insulation composite systems with rendering in

concrete and masonry

Liquid Applied Roof waterproofing Kits, based on

Water Dispersible Polymers

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M8, M10, M12, M16, and

M20 for use in non-cracked concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Torque controlled expansion anchor made of stainless

steel 1.4529 or 1.4565 of sizes M8, M10, M12 and

M16 for use in concrete

Torque controlled expansion anchor made of stainless

steel 1.4529 or 1.4565 of sizes M8, M10, M12 and

M16 for use in concrete

Bonded anchor (injection type) with anchor rod made

of galvanised steel sizes M10, M12 and M16 for use in

non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel of sizes M10, M12 and M16 for use in

non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel 1.4529 of sizes M10, M12 and M16

for use in non-cracked concrete

External thermal insulation Composite System with

rendering for the use as external insulation of building

walls

Nailed-in anchor for fixing of external insulation

composite systems with rendering in concrete and

masonry

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Loose fill thermal insulating material made of hemp

fibres

Insulating material made of loose, free cellulose fibres

In-situ formed loose fill insulation material and/or

acoustic insulation material made of vegetable or

animal fibres

Liquid applied Roof Waterproofing Kit based on

Polyurethane

Post-tensioning kit for prestressing of structures with

unbonded strands for concrete

Torque controlled bonded anchor with anchor rod

made of galvanised steel of sizes M8x55, M10x65,

M12x75, M16x90 for use in concrete

Torque controlled bonded anchor with anchor rod made

of stainless steel of sizes M8x55, M10x65, M12x75,

M16x90 and M20x120 for use in concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite system with

rendering for the use as external insulation of building

walls

External Thermal insulation Composite system with

rendering for the use as external insulation of building

wall

Torque controlled bonded anchor (injection type) with

anchor rod made of galvanised steel of sizes M8, M10,

M12(hef80), M12(hef100), M16, M20 and M24 for use

in concrete

Torque controlled bonded anchor (injection type) with

anchor rod made of stainless steel of sizes M8, M10,

M12(hef80), M12 (hef100), M16, M20 and M24 for

use in concrete

Torque controlled bonded anchor (injection type) with

anchor rod made of stainless steel 1.4529 / 1.4565 of

sizes M8, M10, M12(hef80), M12(hef100) M16, M20

and M24 for use in concrete

Torque controlled bonded anchor (injection type) with

anchor rod made of galvanised steel of sizes M8, M10,

M12(hef80), M12(hef100), M16, M20 and M24 for use

in concrete

Torque controlled bonded anchor (injection type) with

anchor rod made of stainless steel of sizes M8, M10,

M12(hef80), M12(hef100) M16, M20 and M24 for use

in concrete

Torque controlled bonded anchor (injection type) with

anchor rod made of stainless steel 1.4529 / 1.4565 of

sizes M8, M10, M12(hef80), M12(hef100), M16, M20

and M24 for use in concrete

Liquid applied Roof Waterproofing kits, based on

Epoxy Resin

Undercut anchor made of stainless steel of sizes

M10,M12,M16 and M20 for use in concrete

Undercut anchor made of galvanised steel of sizes

M10, M12, M16 and M20 for use in concrete

Torque-controlled expansion anchor made of cinc

yellow passivated steel of sizes M8, M10, M12, M16,

M20 and M24 for use in non cracked concrete only

Hilti powder actuated fasteners X-ENP-19 L15, X-

ENP-19 L 15MX, X-ENP-19 L 15MXR in

combination with Hilti fastening tools DX 76, DX 76

MX, DX 860-ENP, DX 750, DX 750 MX, DX A70 for

fastening of steel sheeting to steel members

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Systems of mechanically fastened flexible SBS roof

waterproofing membranes

External thermal Insulation Composite System with

rendering for use as external insulation ob building

walls

Timber Frame building kits for dwelling-houses and

similar structures

Liquid Applied roof waterproofing on the basis of

polyurethane

Liquid applied roof waterproofing on the bass of

polyurethane

Screwed- in plastic anchor for fixing of external

thermal insulation composite systems with rendering in

concrete and masonry

Torque controlled bonded anchor (injection type) with

anchor rod made of galvanised steel of sizes M8, M10,

M12(hef80), M12(hef100)M16, M20 and M24 for use

in concrete

Torque controlled bonded anchor (injection type) with

anchor rode made of stainless steel of sizes M8, M10,

M12(hef80, M12(hef100)M16, M20 and M24 for use

in concrete

Torque controlled expansion anchor made of

galvanised steel of sizes M8, M10, M12 and M16 for

use in concrete

Torque controlled expansion anchor made of stainless

steel of sizes M8, M10, M12 and M16 for use in

concrete

Torque controlled expansion anchor with internal

thread made of stainless steel of sizes M6, M8, M10

and M12 for use in concrete

Torque controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10, M12, M16 and

M20 for use in non-cracked concrete

Deformation-controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10, M12, M16 and

M20 for use in non-cracked concrete

Deformation-controlled expansion anchor made of

stainless steel of sizes M6, M8x30, M8x40, M10, M12,

M16 and M20 for use in non-cracked concrete

Torque controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10, M12 and M16

for use in concrete

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Non-loadbearing Permanent shuttering kit "Euromac 2"

based on shuttering elements of EPS

Nail-in plastic anchor for fixing of external thermal

insulation composite systems with rendering on

concrete and masonry

external Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation of building walls

Structural Sealant for use in structural sealant glazing

systems

Liquid applied roof waterproofing on the basis on

polyurethane polymers

Loose fill thermal insulating material made of sea grass

Nailed -in plastic anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

Concrete screw made of galvanised steel of sizes

MMS-10, MMS-12, MMS-14 and MMS-16 for use in

concrete

Concrete Screw made of stainless steel of sizes MMS-

10 A4 and MMS-12 A4 for use in concrete

Concrete screw made of galvanised steel of sizes dia10,

dia12, dia 14 and dia 16 for use in concrete

Torque controlled self undercutting anchor, made of

stainless steel, for use in cracked or non cracked

concrete: sizes M8, M12 and M16

Thermal and/or acoustic insulation board made of flax

fibres

Hydraulic binder based on granulated blast furnace slag

for preparation of concrete, mortar and other mixes for

construction and for the manufacturing of construction

products

PROXAN joint sealing compound PK 25 G (pouring

grade) as a component of the PROXAN joint sealing

system used in plants for the containment, handling and

filling of substances hazardous to water

PROXAN joint sealing compound PK 25 ST (gun-

grade) as a component of the PROXAN joint sealing

system used in plants for the containment, handling and

filling of substances hazardous water

Torque controlled expansion anchor made of stainless

steel of sizes M6,M8,M10,M12 and M20 for use in

non-cracked concrete.

Torque controlled expansion anchor made of stainless

steel of sizes M6, M8, M10, M12, M16 and M20 for

use in non-cracked concrete

Torque controlled expansion anchor made of stainless

steel of sizes M6, M8, M10, M12, M16 and M20 for

use in non-cracked concrete

Thermal and/or acoustic insulation mat made of sheep

wool

Timber Frema Building Kit

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel of sizes M10, M12 and M16 for use

ins non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel 1.4529 / 1.4565 of sizes M10, M12

and M16 for use in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel of sizes M10, M12 and M16 for use in

non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Bonded anchor (injection type) with anchor rod anchor

made of stainless steel of sizes M10, M12 and M16 for

use in non-cracked concrete

Bonded Anchor (injection type) with anchor rod made

of stainless steel 1.4529/1.4565 of sizes M10, M12 and

M16 for use in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Bonded anchor (injection type) with anchor to anchor

made of stainless steel of sizes M10, M12 and M16 for

use in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel 1.4529/1.4565 of sizes M10, M12 and

M16 for use in non-cracked concrete

Bonded Anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Bonded anchor (injection type) with anchor rod anchor

made of stainless steel of sizes M10, M12 and M16 for

use in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel 1.4529 of sizes M10, M12 and M16

for use in non-cracked concrete

Insulating material made of hemp and polyester fibres

Screwed-in plastic anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

Internal partition kits for use as non-load bearing walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Plastic Piping kits for heating systems, made of PE-RT

Type I with an oxygen barrier layer

Insulation material made of loose free cellulose fibres

Torque-controlled expansion anchor, made of

galvanised steel, for use in cracked and non-cracked

concrete: sizes M6, M8, M10, M12, M16 and M20

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Non load-bearing permanent shuttering kits based on

panels of insulating materials

Bonded anchor (injection type) with anchor rod or

internal sleeve made of stainless steel of sizes M8,

M10, M20, M24, M27 and M30 for use in non-cracked

concrete

Bonded anchor (injection type) with anchor rod made

of high corrosion resistant steel of sizes M8, M10,

M16, M20, M24, M27 and M30 for use in non-cracked

concrete

Deformation-controlled expansion anchor, made of

galvanised steel, for use in non cracked concrete: sizes

M6, M8, M10, M12 and M16

External Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Plastic nailed - in anchors for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

Liquid applied roof waterproofing kit based on

polyurethane

Underlay for discontinuous roofing

Impregnated joint sealing tape made of foamed

polyurethane for sealing joints around windows and in

facades

External thermal Insulation Composite system with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite Systems with

Rendering

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite Systems with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Torque Controlled expansion Anchor made of

galvanised steel of sizes M6, M8, M10, M12 and M16

for use in concrete

Structural Sealant for use in insulating glass units

Torque controlled expansion anchor made of

galvanized steel of sizes M8, M10, M12 and M16 for

use in concrete

Torque controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10, M12 and M20

for use in non-cracked concrete

Bonded anchor (injection type) with anchor rode made

of stainless steel 1.4529/1.4565 of sizes M10, M12 and

M16 for use in non-cracked concrete

RODAN point fastener

Fastening element made of stainless steel

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Bonded Anchor (injection type) with anchor rod made

of stainless steel of sizes M10, M12 and M16 for use in

non-cracked concrete

Zinc-plated steel torque-controlled expansion anchor in

sizes of M8, M10, M12, M16 and M20, for use in non-

cracked concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Nailed-in plastic anchor for fixing of external thermal

insulation composite systems with rendering in

masonry

Prefabricated stair with solid wood steps and a load-

bearing handrail made of solid wood

Joint sealing compound "BIGUMA - KV 3 PG

(pouring grade) as a component of the joint sealing

system by Dortmunder Gussasphalt GmbH & Co KG

used in plants for the containment, handling and filling

of substances hazardous to water

Joint Sealing Compound "BIGUMA - KV 3 GG (gun

grade) as a component of the joint sealing system

Dortmunder Gussasphalt GmbH & Co KG used in

plants for the containment, handling an filling of

substances hazardous to water

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Liquid applied roof waterproofing kits, based on

polymer modified Bitumen Emulsions

Timber Frame Construction kits for low-rise housing

and similar building structures

Thermal and or acoustic insulation mat made of sheep

wool

Bonded anchor (injection type) with anchor rod made

of stainless steel of sizes M10, M12 and M16 for use in

non)cracked concrete

Bonded anchor (injection type) with anchor rode made

of galvanised steel of sizes M10,M12 and M16 for use

in non-cracked concrete

Non-load bearing permanent shuttering kits "Durisol",

"HARML", "ISOSPAN" and "THERMOSPAN" based

on hollow blocks of wood-chips aggregate concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation to the walls

of buildings.

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Thermal insulating board made of mineral material

Nailed in plastic anchor for fixing of external thermal

insulation composite systems with renering on concrete

and masonry

Type II addition for production of concrete including in

particular cast-in-situ or prefabricated structural

concrete confirming to European standard EN 206-1.

Fly ash according to this ETA may also be used in

mortars and grouts.

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Liquid Applied Roof Waterproofing Kits, based on

water Dispersible Polymers

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Bonded anchor made of galvanised steel for use in non

cracked concrete: sizes M8, M10, M12, M16, M20 and

Bonded injection type anchor made of stainless steel

for use in non cracked concrete: sizes M8, M10, M12,

M16, M20 & M24

Bonded injection type Anchor made of galvanised steel

for use in non cracked concrete: sizes M8, M10, M12,

M16, M20 and M24

Bonded injection type anchor made of stainless steel

for use in non cracked concrete: sizes: M8, M10, M12,

M16, M20 and M24

Bonded injection type anchor made of galvanised steel

for use in non cracked concrete: sizes M8, M10, M12,

M16, M20 and M24

Bonded injection type anchor made of stainless steel

for use in non cracked , conete: sizes M8, M10, M12,

M16, M20 and M24

Bonded anchor made of galvanised steel for use in non

cracked concrete: size M8, M10, M12, M16, M20 and

Bonded injection type anchor made of stainless steel

for use in non cracked concrete: sizes M8, M10, M12,

M16, M20, M24

Bonded anchor made of galvanised steel for use in non

cracked concrete: sizes M8, M10, M12, M16, M20 and

Bonded injection type anchor made of stainless steel

for use in non cracked concrete: sizes M8, M10, M12,

M16, M20 and M24

Bonded injection type anchor made of galvanised steel

for use in non cracked concrete: sizes M8, M10, M12,

M16 and M20

Bonded injection type anchor made of stainless steel

for use in non cracked concrete: sizes M8, M10, M12,

M16 and M20

Bonded injection type anchor made of galvanised steel

for use in non cracked concrete: sizes M8, M10, M12,

M16, M20, M24 and M30

Bonded injection type anchor made of stainless steel

for use in non cracked concrete: sizes M8, M10, M12,

M16, M20, M24 and M30

External Thermal Insulation Composite Systems with

rendering for the use as external insulation of building

walls

Deformation -controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10 and M12 for

use in non-structural applications in concrete

Deformation-controlled expansion anchor made of

stainless steel of sizes M6, M8, M10 and M12 for

multiple use for non-structural applications in concrete

Plastic piping kits for heating systems, made of PE-RT

Type I with an oxygen barrier layer

Log Building Kit

Deformation-controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10 and M12 for

multiple use for non-structural applications in concrete

Wedge-Anchor

Bonded and unbonded bar Post -tensioning kit for

prestressing of structures

Bonded and unbonded bar post-tensioning kit for

prestressing of structures

Torque controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10, M16 and M20

for use in non-cracked concrete

Liquid applied roof waterproofing on the basis of

polyurthane

Liquid applied Roof Waterproofing Kit, base on

Polyyrethane

Door threshold with build-in draining system for

draining off of water.

Liquid applied roof waterproofing on the basis of

polyurethane

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Bonded anchor (injection type)with anchor rod made of

galvanised steel of sizes M10, M12 and M16 for use in

no-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel of sizes M10, M12 and M16 for use in

non-cracked concrete

Bonded anchor (injection type) with anchor made of

galvanised steel 1.4529/1.4565 of sizes M10, M12 and

M16 for use in non-cracked concrete

Bonded anchor (injection type) with anchor rod of

galvanised steel of sizes M10,M12 and M16 for use in

non cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel of sizes M10, M12 and M16 for use in

non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel 1.4529/1.4565 of sizes M10, M12 and

M16 for use in non- cracked concrete

Deformation-controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10, M12, M16 and

M20 for use in non-cracked concrete

Deformation-controlled expansion anchor made of

stainless steel of sizes M6, M8x30, M8x40, M10, M12,

M16 and M20 for use in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Bonded anchor (injection type) with anchor rode made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel of sizes M10, M12 and M16 for use in

non-cracked concrete

Bonded Anchor (injection type with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Nailed -in plastic anchor for fixing of external thermal

insulation composite systems with rendering on

concrete and hollow masonry

Nailed-in plastic Anchor for fixing of external thermal

insulation composite systems with rendering on

concrete and hollow masonry

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Liquid applied roof waterproofing on the basis on

polyurethane polymers

Liquid Applied roof waterproofing, using kits based on

hot-applied polymer-modified bitumen

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering on mineral wool for the use as external

insulation of building walls (ETICS)

Deformation-controlled expansion anchor made of

Stainless steel of sizes M6, M8x30, M8x40, M10, M12

M16 and M20 for use in non-cracked concrete

Torque controlled expansion anchor made of stainless

steel of sizes M8, M10, M12 and M16 for use in

concrete

Torque controlled expansion anchor made of

galvanised steel of sizes M8, M10, M12 and M16 for

use in concrete

Deformation-controlled anchor made of galvanised

steel of sizes M6, M8, 10, M12, M16 and M20 for use

in non-cracked concrete

Deformation-controlled expansion anchor made of

stainless steel of sizes M6, M8, M10 and M12 for

multiple use for non-structural applications in concrete

Torque controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10, M12, M16 and

M20 for use in non-cracked concrete

Torque controlled expansion anchor made of stainless

steel of sizes M6, M8, M10, M12, M16 and M20 for

use in non-cracked concrete

Torque controlled bonded anchor with anchor rod made

of galvanised steel of sizes M8, M10, M12, M16 M20

and M24 for use in concrete.

Torque controlled bonded anchor with anchor rod made

of stainless steel of sizes M8, M10, M12, M16, M20

and M24 for use in concrete

Torque controlled bonded anchor with anchor rod made

of stainless steel 1.4529 of sizes M8, M10, M12, M16,

M20 and M24 for use in concrete

Deformation-controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10 and M12 for

multiple use for non-structural applications in concrete

Type II addition for production of concrete, including

in particular cast-in-situ or prefabricated structural

concrete conforming to European Standard EN 206-1.

Fly Ash according to this ETA may also be used in

mortars and grouts.

Torque controlled expansion anchor made of

galvanised steel for use in non-cracked concrete: sizes

M6, M8, M10 and M12.

Non load bearing shuttering kit "ARGISOL" based on

shuttering elements of EPS

External Thermal Insulation Composite Systems with

renderings for the use as external insulation to the walls

of buildings

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls.

External Thermal Insulation Composite Systems with

rendering on mineral wool for the use as external

insulation to the walls of buildings

Bonded Anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel of sizes M10,M12 and M16 for use in

non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of stainless steel of sizes M10,M12 and M16 for use in

non-cracked concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Thermal Insulating board made of mineral material

Deformation-controlled expansion anchor made of

stainless steel of sizes M6, M 8x30, M 8x40, M10,

M12 M16 and M20 for use in non-cracked concrete

Deformation-controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10 and M12 for

multiple use for non-structural applications in concrete

Deformation-controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10,M16 and M20

for use in non-cracked concrete

Bonded injection type anchor made of galvanised steel

for use in noncracked concrete: sizes M8, M10, M12,

M16, M20 and M24

Bonded injection type anchor made of stainless steel

for use in non-cracked concrete: sizes M8, M10, M12,

M16, M20 and M24

Torque controlled expansion anchor, made of zinc

electroplated steel for use in non cracked concrete

sizes M8, M10, M12, M16 and M20

Insulation Material made of loose, free cellulose fibres

Cellular glass loos fill for use as thermal and frost

insulating layer, water capillary barrier, drainage, and

light fill in building foundations and road construction

applications

External Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Log Building Kit

Log Building Kit

Insulating material made of loose, free cellulose fibres

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

wall

Liquid Applied roof waterproofing on the basis of

polyurethane

Special anchor for the fixing of facade plates from their

back side made of dust-pressed ceramic plates

(stoneware) "Granito Ceramico" according to EN

14411

Bonded anchor injection type with anchor rod made of

galvanised steel of sizes M10, M12 and M16 for use in

non-cracked concrete

Structural Sealant for use in structural sealant glazing

kit

External Thermal Insulation Composite system with

rendering for use as external insulation of building

walls

External Thermal Insulation Composite system with

rendering for use as external insulation of building

walls

Liquid applied roof waterproofing on the basis of

flexible reactive polymethymetacrylate

External Thermal Insulation Composite Systems

(ETICS)

Prefabricated Tension Rod System

Liquid applied roof waterproofing on the basis of

flexible reactive polymethylmethacrylate

Liquid applied roof waterproofing on the basis of

flexible unsaturated polyester

Timber Units for walls, ceilings and roofs

Natural Calcined puzzolana as type II addition

System of mechanically

fastened

flexible

roof

waterproofing membranes

Bonded Anchor with anchor rod made of galvanised

steel of sizes M10, M12, M16, M20 and M24 for use in

non-cracked concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete.

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Bonded anchor with anchor rod made of galvanized

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Bonded anchor (injection type) with anchor rod made

of galvanised steel of sizes M10, M12 and M16 for use

in non-cracked concrete

Nailed-in plastic anchors for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

Insulating material made of lose, free cellulose fibres

ALSAN 310

Bonded Anchor with anchor rod made of stainless steel

of sizes M10, M12, M16, M20 and M24 for use in non-

cracked concrete

Bonded anchor with anchor rod made of stainless steel

1.4529 of sizes M10, M12, M16, M20 and M24 for use

in non-cracked concrete

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12, M16, M20 and M24 for use in

non-cracked concrete

Bonded anchor with anchor rod made of stainless steel

of sizes M10, M12, M16, M20 and M24 for use in non-

cracked concrete

Zinc plated steel torque-controlled expansion anchor in

sizes of M8, M10, M12, M16 and M20 for use in non-

cracked concrete

Liquid applied roof waterproofing on the basis of

polymethylmethacrylate

Liquid applied roof waterproofing on the basis of

polymethylmethacrylate

Trade name 1

weber.therm-WDVS B 200 Flex

Trade name 2

terratherm-WDVS

B

Flex (mit EPS)

Log Building Kit

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External thermal Insulation Composite system with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite systems with

rendering for the use as external insulation of building

walls

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Torque-controlled expansion anchor, made of zinc

electroplated steel, for use in non cracked concrete;

sizes M8, M10, M12, M16 and M20

Arcutherm -WDV System Polystyrol

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation ob building

walls

Bonded anchor < non-cracked in use for steel stainless

of made M16 and M12 M10, sizes rod anchor>

Bonded anchor with anchor rod of sizes M10,M12 and

M16 made of galvanised steel for use in non-cracked

concrete

Bonded anchor with anchor rod of sizes M10, M12 and

M16 made of stainless steel 1.4529/1.4565 for use in

non-cracked concrete

Bonded anchor with anchor rod or internal sleeve made

of stainless steel of sizes M8, M10, M12, M16, M20,

M24, M27 and M30 for use in non cracked concrete

Joint sealing Compound "Masterflex 700 FR (TK 63

G) pouring grade as a component of the joint sealing

system of the degussa Bautechnik GmbH used in plants

for the containment, handling and filling of substances

hazardous to water

Joint sealing compound "Masterflex 700 FR (TK 63 S)

gun grade as a component of the joint sealing system of

the Degussa Bautechnik GmbH used in plants for the

containment, handling and filling of substances

hazardous to water

Non-load bearing permanent shuttering kits

"DURISOL",

"HARML",

"ISOSPAN"

and

"THERMOSPAN" based on hollow blocks of wood-

chips aggregate concrete

Non-Load bearing permanent shuttering kits

"DURISOL","HARML",

"ISOSPAN"

and

"THERMOSPAN" based on hollow blocks of wood

chips aggregate concrete

"DURISOL",

"HARML","ISOSPAN",

and

"THERMOSPAN", based on hollow blocks of wood-

chips aggregate concrete

Liquid applied roof waterproofing on the basis of

polyurethane

Liquid applied roof waterproofing on the basis of

polyurethane

Liquid applied roof waterproofing on the basis of

polyurethane

special anchor for the rear fixing of facade panels made

of selected natural stones according to EN 1469

Nailed in plastic anchor for fixing of external internal

insulation composite systems with rendering in

concrete and masonry

Internal Partition Kit of use as non-load bearing walls

Torque controlled expansion anchor made of

galvanised steel of sizes M8, M10, M12 and M16 for

use in concrete

External thermal insulation composite system with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal insulation Composite system with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite Systems with

rendering for the use as external insulation of

Fasteners for mechanically fastened flexible roof

waterproofing systems

Internal Partitions Kit for use as non-load bearing walls

Systems of mechanically fastened SBS modified

bitumen flexible roof waterproofing membranes

Multilayer-systems of mechanically fastened flexible

SBS bitumen modified roof waterproofing membranes

External Thermal Insulation Composite systems with

rendering for the use as external insulation of building

wall

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering on mineral wool for the use as external

insulation of building walls (ETICS)

External Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation of building walls (ETICS)

External Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Thermal Insulation material in form of boards exposed

to compression loads made of hemp shives

Thermal and/or acoustic insulation board, mats made of

hemp fibres

Thermal and/or acoustic insulation board made of

hemp fibres

Trade name 1

STEICO canaflex H

Trade name 2

FLORAPAN Fassade

Trade name 3

Isover Kontur FSP6 FLORPAN

Fassaden – Dämmplatte

Trade name 1

STEICO canafloor

Trade name 2

FLORAPAN Floor

Trade name 3

Isover

Integra

UKP

FLORAPAN Untersparren - Klemmplatte

Trade name 4

Isover Integra EP6 FLORAPAN

Estrich – Dämmplatte

PLASTIKOL TKS2 as a component of the joint sealing

system of the maxit Deutschland GmbH, Mark

Deitermann used in plants for the containment,

handling and filling of substances hazardous to water

PLASTIKOL TKS as a component of the joint sealing

system of the maxit Deutschland GmbH, marke

Deitermann use in plants for the containment, handling

and filling of substances hazardous to water

Internal Partition Kit for use as non-load bearing walls

Deformation-controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10 and M12 for

multiple use for non-structural applications in concrete

Deformation controlled expansion anchor made of

stainless steel of sizes M8x30, M10x40 and M12x50

for multiple use for non-structural applications in

concrete

Plastic piping kits for heating systems, made of PE-RT

Type I with an oxygen barrier layer

Systems of mechanically fastened SBS modified

bitumen flexible roof waterproofing membranes

Systems of mechanically fastened SBS modified

bitumen flexible roof waterproofing membranes

Systems of mechanically fastened SBS modified

bitumen flexible roof waterproofing membranes

Multi-Layer systems of mechanically fastened flexible

SBS bitumen modified roof waterproofing membranes

Multi-Layer system of mechanically fastened flexible

SBS bitumen modified roof waterproofing membranes

Multi-layer systems of mechanically fastened flexible

SBS bitumen modified roof waterproofing membranes

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Bonded anchor with anchor made of galvanised steel of

sizes M10, M12 and M16 for use in non-cracked

concrete

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Liquid Applied roof waterproofing on the basis of

polyurethane

Bonded anchor with anchor rod made of galvanised

steel of sizes M10,M12,M16,M20 and M24 for use in

non-cracked concrete

Bonded anchor with anchor rod made of stainless steel

of sizes M10,M12,M16,M20 and M24 for use in non-

cracked concrete

External Thermal Insulation Composite System with

renderings for the use as external insulation to the walls

of buildings

Concrete screw made of galvanised steel of sizes

MMS-10, MMS-12, MMS14 and MMS-16 for use in

concrete

Concrete screw made of stainless steel of sizes MMs-

10and MMs-12 for use in concrete

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12, M16, M20 and M24 for use in

non-cracked concrete

Bonded Anchor with anchor rod made of stainless steel

of sizes M10, M12, M16, M20 and M24 for use in no-

cracked concrete

Bonded anchor with anchor rod made of stainless steel

1.4529 of sizes M10, M12, M16, M20 and M24 for use

in non-cracked concrete

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Bonded anchor with anchor rod made of stainless steel

of sizes M10, M12, M16, M20 and M24 for use in non-

cracked concrete

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Bonded anchor with anchor rod made of stainless steel

of sizes M10, M12, M16, M20 and M24 for use in non-

cracked concrete

Homogenous building board for internal lining

Three-dimensional nailing plate (timber-to timber

angle bracket)

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Bonded anchor with anchor rod of sizes M10, M12 and

M16 made of galvanised steel for use in non-cracked

concrete

External Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite system with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

renderings for the use as external insulation to the walls

of buildings

Torque controlled expansion anchor made of stainless

steel of sizes M6, M8, M10, M12 and M16 for use in

non-cracked concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Torque controlled expansion anchor made of stainless

steel 1.4529/1.4565 of sizes 30 M6 and 40 M6 for

multiple use for non-structural applications in concrete

Torque-controlled expansion anchor made of stainless

steel of sizes 30M6 and 40 M6 for multiple use for

non-structural applications in concrete

Single layer mechanically fastened roof-waterproofing

kit

Double layer mechanically fastened roof-waterproofing

kit

Concrete screw made of galvanised steel of sizes 10,5

and 12,5 for use in concrete

Systems of mechanically fastened flexible roof

waterproofing membranes

Structural sealant glazing kits

Torque-controlled expansion anchor made of stainless

steel of sizes 30 M6 and 40 M6 for multiple use for

non-structural applications in concrete

Systems pf mechanically fastened flexible roof

waterproofing membranes

Light Composite wood-based joists

Post-tensioning kit for prestressing of structures with

unbonded strands for concrete

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Anchor made of galvanised steel for multiple use for

non-structural applications in concrete

External thermal Insulation composite system with

rendering for the use as external insulation of building

walls

Fasteners for mechanically fastened flexible roof

waterproofing systems

Torque controlled bonded anchor made of galvanised

steel of sizes M10, M12, M16,M20 and M24 for use in

concrete

Torque controlled bonded anchor made of stainless

steel of sizes M10, M12,M16, M20 and M24 for use in

concrete

External Thermal Insulation Composite system with

rendering for the use as external insulation of building

walls

Composite waterproofing kit for roofs and construction

works

Anchor made of galvanised steel of sizes 6 x 25 and 6 x

30 for multiple use for non-structural application siin

concrete

Anchor made of galvanised steel of size 6 x 30 for

multiple use for non-structural applications in concrete

Anchor made of stainless steel 1.429 of size 6 x 30 for

multiple use for non-structural applications in Concrete

Prefabricated stair with steps and a load-bearing

handrail made of solid wood for use as an indoor stair

in buildings of category A EN 1990: 2002

Anchor made of galvanised steel for multiple use for

non-structural applications in concrete

Structural Sealant Glazing Kits

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

wall

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

wall

External Thermal Insulation Composite system with

rendering for the use as external insulation of building

walls

Bonded anchor rod made of galvanised steel of sizes

M10, M12 and M16 for use in non-cracked concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering on mineral wool for the use as external

insulation to the walls of buildings

Non load bearing shuttering kit "QUAD -LOCK" based

on shuttering elements of EPS

Internal Partition kit for use as non-loadbearing walls

Nailed-in plastic anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Bonded anchor with anchor rod made of stainless steel

of sizes M10,M12 and M16 for use in non-cracked

concrete

Bonded anchor with anchor rod made of stainless steel

1.4529/1.4565 of sizes M10, M12 and M16 for use in

non-cracked concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Fire Protective Board

Fire Protective Board

Light Composite wood-based beams and columns for

structural use

Prefabricated stair sith steps made of solid wood and

load-bearing bolt for use as an indoor stair in buildings

of Category A, EN 1990:2002

Prefabricated stair with steps and a load-bearing

handrail made of solid wood for use as an indoor stair

in buildings of category A, EN 1990:2002

Steel Beams with special joining technology

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Fire Protective Board

Bonded anchor with anchor rod made of galvanized

steel of sizes M8, M10,M12, M16, M20 and M24 for

use in non-cracked concrete

Fire Protective board

Fire Protective Board

Special anchor for therear fixing of facade panels made

of Fibre-cement flat sheets according to EN-12467

External Thermal Insulation Composite Systems with

rendering for the use as external insulation of building

walls

External thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Masterflex 700 FR gun grade black as a component of

the joint sealing system of the Defussa Bautechnick

GmbH used in plants for the containment, handling and

filling of substances hazardous to water

External Thermal Insulation Composite systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Post Tensioning kit for prestressing of structures

Pre-fabricated stair with steps made of solid wood or

wood based products and load-bearing bolts for use as

an indoor stair in buildings of category A, EN

1990:2002

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Bonded anchor with anchor rod made of stainless steel

1.429 of sizes M10, M12 and M16 for use in non-

cracked concrete

Bonded anchor with anchor rod made of stainless steel

of sizes M10, M12 and M16 for use in non-cracked

concrete

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

External Thermal Insulation Composite System with

rendering on mineral wool for the use as external

insulation to the walls of buildings

Torque-controlled expansion anchor made of stainless

steel 1.4529/1.4565 of sizes 30 M6 and 40 M6 for

multiple use for non-structural applications in concrete.

Prefabricated Tension Rod System

Structural sealant glazing kit for use in curtain walling

Light composite wood-based beams and columns for

structural use

External Thermal Insulation Composite Systems with

rendering for the use as external insulation to the walls

of buildings

Deformation-controlled expansion anchor made of

galvanised steel for multiple use for non-structural

applications in concrete

Deformation-controlled expansion anchor made of

galvanised steel for multiple use for non-structural

applications in concrete.

Plastic nailed-in anchors for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

Systems of mechanically fastened flexible roof

waterproofing membranes

Systems of mechanically fastened flexible roof

waterproofing membranes

Deformation Controlled expansion anchor made of

stainless steel of sizes M6, M8, M10 and M12 for

multiple use for non-structural applications in concrete

Deformation-controlled expansion anchor made of

galvanised steel of sizes M6, M8, M10 and M12 for

multiple use for non-structural applications in concrete.

Special anchor for the rear fixing of facade plates made

of resin bonded concrete stone (polymer concrete)

Nailed-in plastic anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite system with

rendering on polystyrene for the use as external

insulation to the walls of buildings

System of mechanically

fastened

flexible

roof

waterproofing membranes

External Thermal Insulation Composite Systems with

rendering for the use as external insulation of building

walls

Special anchor for the fixing of facade plates from their

back side made of selected natural stones according to

EN 1469

Bonded Injection type anchor made of galvanised steel

for use in non cracked concrete: sizes M8, M10, M16,

M20 and M24

Bonded injection type anchor made of stainless steel

for use in non cracked concrete: Sizes M8, M11, M16,

M20 and M24

Liquid Applied Roof Waterproofing Kits, based on

Water Dispersible polymers

Composite Waterproofing kit on the basis of EPDM for

the waterproofing of roofs and construction works

Composite waterproofing kit on the basis of EPDM for

the waterproofing of roofs and construction works.

Deformation-controlled expansion anchor made of

galvanised steel for multiple use for non-structural

application in concrete

External Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Prefabricated stair with steps and a load-bearing

handrail made of solid wood for use as an indoor stair

in buildings of category A, EN 1990:2002

Liquid Applied Roof Waterproofing Kit, based on

Polyurethane

External Thermal Insulation Composite System

´ETICS) with rendering on polystyrene for use as

external insulation to the walls of buildings

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Torque controlled expansion anchor made of stainless

steel of sizes M6, M8, M10 M16 and M20 for use in

no-cracked concrete

Three Dimensional Nailing plate (Joist hanger for

wood to wood connections and wood to concrete or

steel connections)

Undercut anchor of sizes M8, M10 and M12 for use in

concrete

Bonded anchor made out of galvanised steel for use in

non cracked concrete: sizes M12, M16, M20 M24 and

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Thermal insulation boards made of grass fibres

Thermal Insulation boards made of expanded perlite,

deviating from EN 13169

Liquid applied roof waterproofing on the basis of

polyurethane

Plastikol TKS 2 black as a component of the joint

sealing system of teh maxit Deutschland GmbH, Marke

Deitermann, used in plants for the containing, handling

and filling of substances hazardous to water

Plastikol TKS Schwarz/black as a component of the

joint sealing system of the maxit Deutschland GmbH

Marke Deitermann, used in plants for the containment,

handling and filling of substances hazardous to water.

Liquid applied roof waterproofing on the basis on

polyurethane polymers

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Joint sealing compound "INDUFLEX_VK 6030,

GWS-FugenDichtgiessfähig" (poring grade) as a

component of teh joint sealing system by INDUTEC

GmbH used in plants for the containment, handling and

filling of substances hazardous to water.

Post-tensioning kit for prestressing of structures

Liquid applied roof waterproofing on the basis on

polyurethane polymers

Systems of Mechanical

fastened

flexible

roof

waterproofing membranes

External Thermal Insulation Composite systems

(ETICS) with rendering on mineral wool for the use as

external insulation to the walls of buildings

Structural sealant glazing kit for use in curtain walling

Structural Sealant Glazing kit for use in curtain walling

Post-tensioning kit for prestressing of structures

Internal bonded tendons for concrete and composite

structures

External Thermal Insulation Composite Systems

(ETICS) with rendering on mineral wool for the use as

external insulation to the walls of buildings

Fasteners for Flexible roof Waterproofing membrane

system

External Thermal Insulation Composite System with

renderings for the use as external insulation to the walls

of buildings

Rapid Setting Cement

Non load-bearing permanent shuttering kit based on

elements of EPS

Rapid Setting Cement

Rapid Setting Cement

Rapid Setting Cement

Rapid setting cement

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Liquid applied roof waterproofing on basis of

polyurethane

Torque-controlled expansion anchor made of

galvanised steel of sizes 12, 15, 18 and 25 for use in

concrete

Nailed-in plastic anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

External Thermal Insulation Composite system with

rendering for the use as external insulation of building

walls

External Thermal insulation Composite systems with

rendering for the use as external insulation to the walls

of buildings

Wood-based composite slab element for structural

purposes

Torque-controlled metal anchor for fastening of load-

bearing components into concrete

Insulating Concrete Form work

Post-Tensioning kit for prestressing of structures with

bonded/unbonded tendons of 3-55 strands

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Systems with rendering on

expanded polystyrene (EPS) for the use as external

insulation of building walls

Light Composite wood-based beam

Non Load-bearing permanent shuttering kit based on

panels of insulating material

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Three-Dimensional nailing plate (timber to timber joist

hangers)

Special Cement CEM III/A with high sulfate resistance

Anchor made of galvanised steel of sizes 6 x 25 for

multiple use for non-structural applications in concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Three-Dimensional lainling plate (timber to timber

cantilever bracket)

External Thermal Insulation Composite system with

rendering for use as external insulation of building

walls

Three-dimensional Nailing plates

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Plastics piping kits for the transport system of hot and

cold water, made or PE-RT Type II

External Thermal Insulation Composite systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite System with

rendering on mineral wool for the use as external

insulation to the walls of buildings

Three-dimensional

nailing

plate

(timber-to-timber

angle bracket)

Prefabricated stair with steps and a load-bearing

handrail of solid wood for use as an indoor stair in

buildings of category A, EN 1990:2002

External Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite System with

rendering on mineral wool for the use as external

insulation to the walls of buildings

Non-Load bearing partition kits for dry rooms

Impregnated joint sealing tape made of foamed

polyurethane for sealing joints around windows and in

facades

Impregnated joint sealing tape made of foamed

polyurethane for sealing joints around windows and in

facades

Impregnated joint sealing tape of foamled polyurethane

for sealing joints around windows and facades

External thermal insulation composite Systems

(ETICS) with rendering on mineral wool for the use as

external insulation to the walls of buildings

External Thermal Insulation Composite Systems

(ETICS) with rendering on mineral wool for the use as

external insulation to the walls of buildings

External Thermal Insulation Composite Systems

(ETICS) with rendering on mineral wool for the use as

external insulation to the walls of Buildings

External Thermal Insulation Composite Systems

(ETICS) with rendering on mineral wool for the use as

external insulation to the walls of buildings

Liquid Applied roof waterproofing on the basis of

polyurethane

Plastic piping kits for the transport system of hot and

cold water, made of PE-RT Type II

External Thermal Insulation Composite System with

rendering on expanded polystyrene (EPS) for the use as

external insulation of building walls

Liquid Applied roof waterproofing on the basis of

polyurethane

Concrete screw made of galvanised steel of sizes

8,10,12 and 14 for use in concrete

Loose wood shavings as thermal insulation material

External Thermal insulation Composite system with

rendering for the use as external insulation of building

walls

Systems of mechanically fastened flexible roof

waterproofing

Bonded anchor with anchor rod made of galvanised

steel of sizes M10, M12 and M16 for use in non-

cracked concrete

Bonded anchor with anchor rod made of stainless steel

of sizes M10, M12 and M16 for use in no-cracked

concrete

Bonded anchor with anchor rod anchor made of

stainless steel 1.4529/1.4565 of sizes M10, M12 and

M16 for use in non-cracked concrete

External Thermal Insulation Composite system with

rendering for the use as external insulation of building

walls

Concrete screw made of galvanised steel of sizes 10

and 12 for use in concrete

External Thermal Insulation Composite Systems

(ETICS) with rendering on mineral wool for the use as

external insulation to the walls of buildings

External Thermal Insulation Composite Systems

(ETICS) with rendering on mineral wool for the use as

external insulation to the walls of buildings

External Thermal Insulation Composite Systems

(ETICS) with rendering on mineral wool for the use as

external insulation to the walls of buildings

External Thermal Insulation Composite Systems

5ETICS) with rendering on mineral wool for the use as

external insulation to the walls of buildings

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

Torque Controlled expansion anchor made of

galvanised steel of sizes M8, M10,M12 and M16 for

use in non-cracked concrete

Systems of flexible roof waterproofing composed by

flexible membranes made with Thermoplastics

Poliofenic plastics (TPO)

External Thermal Insulation Composite System with

rendering for the use as external insulation off building

walls

Non load bearing permanent shuttering kit "IZODOM

2000 POLSKA" based on shuttering elements of foam

material (EPS and Neopor)

External thermal Insulation Composite Systems

(ETICS) with rendering on mineral wool for the use as

external thermal insulation to the walls of buildings

Timber Frame Building Kit

External thermal Insulation Composite Systems with

rendering on mineral wool for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite Systems with

rendering

Concealed Beam Hangers for connection of solid wood

or wood based elements to solid wood or wood based,

or concrete support

External Thermal Insulation Composite Systems with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Nailed-in plastic anchor for fixing of external thermal

insulation composite systems with rendering in

concrete and masonry

External Thermal Insulation Composit System with

rendering for the use as external insulation of building

walls

Liquid Applied roof waterproofing on the basis on

polyurethane polymers

Deformation-controlled expansion anchor of sizes M6,

M8, M10, M12, M16 and M20 for use in non-cracked

concrete

Light Composite wood-based beam

Universal brackets, purlin and joist anchors for

connection of solid wood or wood based elements to

solid wood or wood based support

Anchor made of galvanised steel for multiple use for

non-structural applications in concrete

Deformation-controlled expansion anchor of sizes M6,

M8, M10 and M12 for multiple use for non-structural

applications in concrete

External thermal insulation Composite system with

rendering on mineral wool for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation to the walls of buildings

External Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation t the walls of buildings

External Thermal Insulation Composite System with

rendering on polystyrene for the use as external

insulation to the walls of buildings

Impregnated joint sealing tape made of foamed

polyurethane for sealing joints around windows and in

facades

Concrete screw made of galvanised steel of size M10

for use in cracked and uncracked concrete

Torque controlled expansion anchor made of

galvanised steel of sizes M8, M10 and M16 for use in

no-cracked concrete

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite System with

rendering for the use as external insulation of building

walls

External Thermal Insulation Composite Systems

(ETICS) with rendering on mineral wool for the use as

external insulation to the walls of buildings

External Thermal Insulation Composite System with

renderings for the use as external insulation to the walls

of buildings

ETAs without European Technical Approval Guidelines as per Article 11 of the

In product areas where no ETAG exists, ETAs can be awarded, subject to the

agreement of all EOTA bodies and the European Commission, through what is known

as the Common Understanding of Assessment Procedure (CUAP), in which the

assessment criteria for the product and its intended use are set out.

Full details of this arrangement are given in EOTA’s Common Procedural Rules for

Requesting, Preparing and the Granting of European Technical Approvals, in

particular in sub-sections 3.2.3 and 3.2.4. The procedure is also called up in the CPD

(Article 9.2)

For the time being the EC has authorised EOTA to issue ETAs according to this

procedure of Article 9.2 for the following product area(s)

Subjects

1. Permanent insulating shuttering system

2. Internal insulating floor finishing system

3. Construction products made of animal fibres for acoustic and thermal

insulation

Construction products made of vegetable fibres for acoustic and thermal

insulation

Amendment (version bis)

Amendment regrouping previous versions (version tris)

cluster 1 Factory-made thermal insulation material and/or acoustic

insulation material made of vegetable or animal fibres

cluster 1 Rev1 Factory-made thermal insulation material and/or

acoustic insulation material made of vegetable or animal fibres

cluster 2 In-situ formed loose fill thermal insulation material and/or

acoustic insulation material made of vegetable or animal fibres

Thermal insulation material and/or acoustic insulation material made of

hemp fibres to be used under floating floors

Kit for traffic noise reducing devices (using hollow blocks of cement bonded

wood chips as permanent shuttering system)

Prefabricated compressed mineral wool boards with two layers of acrylic

paints (on the external side of the product)

Lightweight sound absorbent baffle made of wood fibres (laminated particle

board, for interior walls)

Sound absorbing elements for internal use, made of melamine resin foam

with variable surface structure, used with or without coating

Vibration and impact noise isolation with floating floor systems. Surface

mats and discrete (pads) resilient isolators as element of floating floor systems

Bitumen on coated polystyrene granules as a dry mix for impact sound

insulation

Large-sized fibre gypsum panels used for walls of prefabricated houses

Channel bars (cast-in steel channel bars)

Vibration and noise isolation with elastically fixed wall panels (elastomeric

or composite-elastomeric materials placed between supported wall element and

the structural element of the building)

Chemical anchoring kit, consisting of a polymer resin and an activator

contained separately within a single cartridge. Complete mixing when extruded

Special anchors (bolt and eccentric sleeve of stainless steel)

Wall plates made of stainless steel

Kit consisting of a trap with partially mechanical closure, mounted in a non-

trapped gully

17.1. Kit consisting of a trap with partially mechanical closure, mounted in a

non-trapped gully – Rev 1

Rice husks in bulk

Rubber-based expansion anchor

19.1. Rubber-based expansion anchor – Rev 1

Cast-in anchor bolt

Steel plate with cast-in anchor(s)

Kit of epoxy concrete / glassfibre-reinforced polyester anchors / epoxy

mortar

Powder actuated fastener for the fixing of insulation material

Connection and protection devices for load-bearing pre-cast concrete piles

(two products: pile joint and rock shoe)

Solid wood slab element (bridges)

Punching preventer for concrete slabs

Solid wood slab element (buildings)

Roof insulation supporting waterproofing systems

Cellulose-reinforced bitumen shingles

Stud rails and double head studs for increasing the punching capacity of flat

slabs on columns

Homogenous building board for external cladding

Composite structural floor system

Internal covering system of gypsum fibre boards

Homogenous building board for internal lining

Gypsum bonded particleboard

Cavity trays

Couplings for standardised reinforcing bars

Pressboard façade claddings

Modular building panels

Fastener of external wall claddings

Microprismatic retro-reflective sheetings

Building kit made of special components of wood-based materials

Column shoes

Connector for Sandwich elements of concrete

Kit for manhole top consisting of Cover and additional rings made of plastic

for different purposes

Balcony glazing system without vertical frames

Composite roof waterproofing kit

Mechanical fastening system for fixation of thermal insulation in flat or

pitched roofs made of steel

Gas and watertight seals for pipes in the area of wall and floor penetrations

Ceiling/flooring elements made of wooden boards or laths, glued on the flat

side.

Sealing kits, profiles and strips usually made of foamed polyurethane, Feb 2003

plastic impregnated bitumen or butly

Joints sealing compounds and profiles

Roof systems: large metal shells with or without thermal insulation

Chemical waste drainage system

3D Construction Kit

Steel truss for roofs

Prefabricated roller shutter box

Vibration and noise isolation with elastically suspended ceilings

Anchor for External Thermal Insulation Composite Systems (ETICS)

Tension Rod System

Ventilation opening device with acoustic damping

Wood shavings in bulk to be used for thermal insulation

Kit for injection piles (composite steel/concrete piles) with a structural

member of defined steel, dia 63.5 mm

Elastomeric bearings for the building sector of type “b”: Profiled

elastomeric bearing

Sliding bearing

Admixture for concrete recycling “Delvo Stop 10G”

Admixture “Delvo stop 10 G” for washing water

Rapid setting cement A, B and C

Rapid setting cement

Timber units for walls and roofs

Single point supported vertical glazing

Point fastener

Surface water repellent product, hydrofobic agents based on organo-

metallic substances

Coating system eliminating electrostatic charges for facilities used for

storage, filling and handling of water endangering liquids

Coating system to be used for facilities used for storage, filling and

handling of water endangering liquids

Fire resistant glazed kits

Wood fibre insulation as boards sprayed in situ

Thermal insulating board made of mineral material

Kit for pipe system consisting of outer pipe made of concrete, unreinforced

or reinforced and inliner made of unplasticized polyvinylchloride (PVC – U)

which are fixed together and fittings of the same materials

Light composite wood based beam

Lightweight framing elements for non-ventilated sheet metal façades

External thermal insulation system based on cement-free adhesive mortar

and base coat

Fire screen (A barrier to prevent the spread of fire, smoke and sparks in

ventilation ducts)

Fabric connecting joints

Level-crossing systems (types A1, A2 and B)

Plastic piping kits for the transport system of cold and hot water intended

for human consumption, made of PE-RT with or without barrier layer

Double-wall cylindrical flat-bottom tank made of GRP

Spherical, double-walled tank of polymer concrete faced with GRP

Single-wall cylindrical flat-bottom tank of GRP

Concrete screw for anchorage in normal-weight concrete

Cartridge fired pin for connections for thin gauge steel members and

sheeting

Steelwork connector

Buried glass reinforced filament wound (GRE) piping systems for the

transport under pressure of water intended for human consumption

Buried glass reinforced filament wound (GRE) piping systems for the

transport under pressure of water intended for human consumption in polluted

soils

Buried glass reinforced filament wound (GRE) piping systems for the

transport under pressure of water not intended for human consumption

Buried glass reinforced filament wound (GRE) piping systems for drainage

and sewerage with or without pressure

Plastic piping kits for heating systems, made of PE-RT with an oxygen

barrier layer

Piping made from thermoplastic materials, for the transport of chilled water

Factory cellulose glass loose fill

Piles made of ductile iron

Thermal insulation kit for roofs intended to be assembled in situ

Vibration isolation of buildings with elastomeric bearing

Roofing underlay

Binder in concrete and mortar

Door threshold with build-in draining system for draining off of water

Hydraulic binder (slag and additives)

Specialised glued laminated wood beam

Annular ringed shank nails and connector screws

Fly ash for concrete

109.1. Fly ash for concrete

Panels for acoustic and thermal insulation

Pipe penetration seal using an intumescent mat

Damper for damping vibrations, mainly in buildings

Glass concrete composite system (gccs)

Structural Sealant Glazing System

Invisible Concealed Hinges

Emergency Escape Bolt operated by a pull handle & frangible component

Polyurethane-bound mats made of mineral material to be used for impact

sound insulation

Cement-bonded board

Metal Anchor for use in autoclaved aerated concrete

Levelling fastener system for roofs, walls and interior applications with

sub- constructions made out of concrete

Levelling fastener system for roofs, walls and interior applications with

wooden sub- constructions

Vehicle and rail load-bearing bodies made of reinforced concrete to seal

areas, suitable as installation for discharging water-contaminating liquids over

sloping to use in construction works to deal with water-contaminating

substances.

Sealing system made of asphalt to seal areas, suitable as installation for

discharging water-contaminating liquids over sloping to use in construction

works to deal with water-contaminating substances.

Restoration system for sett paving areas

Joint sealing system glued on concrete

Surfacing material for a layer impervious to water contaminating

substances

Kit of waterproofing polymeric membrane and other components for

creating a waterproofing system against action of water on walls and floors of

buildings under indoor and outdoor conditions

Kit of a Elastomer/Bitumen composite sheet and other components for Feb 2006

creating a roof and construction waterproofing system

Kit of liquid applied polymer modified mineral sealing mass and other

components in contact with tile coverings for creating a waterproofing system

against action of water on different parts of constructions under indoor and

outdoor conditions

Polypropylene foam insulating boards

Intumescent, flexible fire stopping fire sealing product based on graphite

(reactive material)

Adhesive tape for structural glazing application

Natural calcined pozzolana as type II addition

Kit for pre-insulated aluminium ducts

Ceramic coating for thermal insulation

Translucent external wall insulation made of prefabricated façade panels

Kit for soil nails

Kit for rock and soil anchors

Spherical bearing with special sliding material

Floor covering on the basis of polyurethane

Thin reflective insulation product intended to be used as thermal insulation

complement in the construction envelope

Spray-applied mineral wool

143. Dry Plate

Pipe liner for renovation of underground non-pressure sewerage networks

with nominal pipe diameters from 100 mm to 1200 mm to be incorporated with

a special procedure

Steel beams with special joining technology

Elastomeric bearings for the building sector. Specific title of the products

applied for

Type “a”: Elastomeric bearing of higher hardness

Road Marking products

A kit consisting of a thermal insulation board, fabricated from expanded

polystyrene (EPS) and a defined facing to be used for accessible flat roofs for

pedestrian traffic applied in a roofing system

Finishing board, kit with patended click mechanism

Plastic sheets for sealing of collecting basins and collecting rooms for the

storage of water-contaminating liquids (liquids hazardous to water)

Fire seals, smoke seals and combined fire and smoke seals for fire resisting

and/or smoke control door assemblies

Unplasticized poly (vinyl chloride) (PVC-U) piping system for domestic

waste water discharge inside the building to a maximum discharge temperature

of 75°C

Sheets of factory-made machine-welded fabric for cracking control in

concrete elements

Soft foam insulation

Flexible coupling for gravity and pressure (below 1.5 bars) sewerage and

drainage pipe

Quenched and tempered wire for prestressing, ribbed and plane

Plastic steps for underground man entry chambers

Double wall static tanks made from rotating moulded polyethylene for

above ground storage of domestic heating oils and diesel fuels

Precast conrete products – Beams made of prestressed steel fibre concrete

HRC T-headed reinforcement steel bar

Special cement CEM III/A with high sulphate resistance

Glass-crystallic Cladding plates

Self-Adhesive Glass mesh Tape

Highly densified EPS as a load bearing and thermal insulating element

Insulation product made of expanded perlite (EPB)

Composite cement (clinker, blast furnace slag, natural puzzolana) class

32,5 N-LH with high sulphate resistance

Wood & Metal composite lighting columns

Sauna Stove fired by wood

Polyestyer fibre thermal & Acoustic insulation

Timber Frame Kit

Kit composed by sub frame and fixings for fastening cladding elements

and also external wall elements, made of stone and ceramics

A packaged small domestic waste water treatment plant for up to 50 PT,

made of rotationally moulded PE for use underground and subjected to traffic

loads

Composition toilet

With bricks coated external insulation system

Boards made of natural agglomerated cork for thermal and acoustic

insulation

Bitumen shingles with mineral or synthetic reinforcement

Laminated bitumen shingles with mineral or synthetic reinforcement

Fiberboard for wall and roof constructions, vapour open

Floor panel with a polyurethane surface

Profiled steel sheeting for floor systems in combination with a ribbed

reinforced concrete slab

Punched metal plate fasteners

Welded gabion products

Pool Safety Cover

Prefabricated cable pits in reinforce concrete

Prefabricated cable pits made of polystyrene (ps) recycled

Calcium carbonate fines as additions for concrete with binding properties

similar to additions type II

Masonry Spacer Mat

Roof insulation supporting roofing tiles

One component bitumen-polyurethane resin for flashing application

applied directly to bitumen waterproofing membrane used in the horizontal part

of the roof

Remedial damp-proof course

Powered pedestrian door drives and systems

Sandwich boards composed by three layers, respectively of agglomerated

cork, coconut fibres and fibreboard MDF

Agglomerated cork and grain recycled rubber with polyurethane binder

Agglomerated cork with polyurethane binder

Mortar with insulating components for floor decks

Cast-in anchor with internal threaded socket

Fastening screw for metal sheet roof covering

Fabricated fittings manufactured by heat moulding (thermo moulding)

from an extruded unplasticized polu(vinyl chloride) (PVC-U) pipe with an

intermediate layer of PVC-U foam, to be used with PVC-U pipes for non-

pressure drainage or sewerage buried in the ground

Swivel joints manufactured by heat moulding (thermo moulding) from an

extruded unplasticized poly(vinyl chloride) (PVC-U) pipe, with a free angle of

deflection to a maximum of 30° to increase the flexibility of fittings, such as

brands, couplers and saddles, in buried non-pressure and sewage applications

Copper plumbing tube with polyethylene covering for sanitary and heating

applications

Kit for closure system for conveyors systems

Insulation material made of granulated polystyrene and compound

202.1 (Rev1) Insulation material made of granulated polystyrene and compound

Glazing guardrail kit

PVC sheet for leak protecting linings

Thermomechanically rolled long steel products made of weldable fine

grain structural steel of special steel grades

Structural sealant glazing on wood frame

External Thermal Insulation Composite System faced with clinker brick

Semi-flexible pavement/floor topping

Ventilated façade system with self-supporting composite panels.

Mechanical Anchorages for Reinforcing Bars

Reinforcing Bars with Threaded Ribs

Hot rolled products of structural steels

Plastics piping kits for the transport system of hot and cold water, intended

for human consumption, made of glass reinforced polypropylene

Plastics piping kits for heating systems, made of glass-reinforced

polypropylene

Plastics piping kits to be used in fixed fire fighting systems, made of glass-

reinforced polypropylene

Light weight cementitious screed

Modular tiles of natural stone including snap-on connection and

polyurethane layer

Factory-made boards and products formed by moulding of a silicate

polystryrene composite for the thermal and/or acoustical insulation

An anchor device designed to be fully bonded to a multi layered modified

bitumen roof waterproofing system provided with a polyester reinforcement ,

to form a structural anchor without perforating the roof waterproofing system,

intended to connect a personal fall protection system

Bolted glazing kit

Wood-concrete composite slab

Light weight floor system

Integrated facade kits with active and/or passive solar elements (IFK-SRE)

Concrete Protection Linings of Collecting Basins/Rooms for Liquids

Hazardous to Water

Sealing Kit for Filling Areas of Petrol Stations

Reinforcing Kit with Carbon Fibre Laminates for the Strengthening of

Beams and Plates of reinforced and Prestressed Concrete

Light composite wood-based beam

Liquid applied roof waterproofing kits based on block co-polymer

elastomeric, 100% synthetic rubber

Kit for reinforced concrete members subject to compressive loading

For Schedule V to the principal regulations, there shall be substituted

4. the following

“Schedule V

LIST OF HARMONISED STANDARDS

Harmonised standards of construction products for which CE marking is

mandatory

EN 40-5:2002 as implemented nationally by MSA EN 40-5:2000

Lighting columns - Part 5: Requirements for steel lighting columns

EN 40-6:2002 as implemented nationally by MSA EN 40-6:2002

Lighting columns - Part 6: Requirements for aluminium lighting columns

EN 40-7:2002 as implemented nationally by MSA EN 40-7:2003

Lighting columns - Part 7: Requirements for fibre reinforced polymer composite

lighting columns

EN 54-3:2001/A1:2002 as implemented nationally by MSA EN

54-

3:2001/A1:2002

Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders

EN 54-5:2000/A1:2002 as implemented nationally by MSA EN

54-

5:2000/A1:2002

Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors

EN 54-7:2000/A1:2002 as implemented nationally by MSA EN 54-

7:2000/A1:2002

Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using

scattered light, transmitted light or ionization

EN 54-12:2002 as implemented nationally by MSA EN 54-12:2003

Fire detection and fire alarm systems – Part 12: Smoke detectors – Line detectors

using an optical light beam

EN 179:1997/A1:2001/AC:2002 as implemented nationally by MSA EN

179:2000/A1:2002/AC:2002

Building hardware-Emergency exit devices operated by a lever handle or push pad-

Requirements and test methods

EN 197-1:2000/A1:2004 as implemented nationally by MSA EN 197-1:2000

Cement-Part 1: Composition, specifications and conformity criteria for common

cements

EN 197-4:2004 as implemented nationally by MSA EN 197-4:2004

Cement – Part 4: Composition, specifications and conformity criteria for low early

strength blastfurnace cements

EN 413-1:2004 as implemented nationally by MSA EN 413-1:2004

Masonry cement – Part 1: Composition, specifications and conformity criteria

EN 442-1:1995/A1:2003 as implemented nationally by MSA EN 442-

1:2000/A1:2003

Radiators and convectors – Part 1: Technical specifications and requirements

EN 459-1:2001 as implemented nationally by MSA EN 459-1:2002

Building lime-Part 1: Definitions, specifications and conformity criteria

EN 523:2003 as implemented nationally by MSA EN 523:2003

Steel strip sheaths for prestressing tendons – Terminology, requirements, quality

control

EN 588-2:2001 as implemented nationally by MSA EN 588-2:2002

Fibre cement pipes for drains and sewers-Part 2: Manholes and inspection chambers

EN 671-1:2001 as implemented nationally by MSA EN 671-1:2001

Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose

EN 671-2:2001 as implemented nationally by MSA EN 671-2:2001

Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose

EN 681-1:1996/A1:1998/A2:2002 as implemented nationally by MSA EN 681-

1:2000A1:1998/A2:2002

Elastomeric seals - Material requirements for pipe joint seal used in water and

drainage applications - Part 1 : Vulcanized rubber

EN 681-2:2000/A1:2002 as implemented nationally by MSA EN 681-

2:2000/A1:2002

Elastomeric seals - Material requirements for pipe joint seals used in water and

drainage applications - Part 2: Thermoplastic elastomers

EN 681-3:2000/A1:2002 as implemented nationally by MSA EN 681-

3:2000/A1:2002

Elastomeric seals - Material requirements for joint seals used in water and drainage

applications - Part 3: Cellular materials of vulcanized rubber

EN 681-4:2000/A1:2002 as implemented nationally by MSA EN 681-

4:2000/A1:2002

Elastomeric seals - Material requirements for pipe joint seals used in water and

drainage applications - Part 4: Cast polyurethane sealing elements

EN 682:2002 as implemented nationally by MSA EN 682:2002

Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying

gas and hydrocarbon fluids

EN 771-3:2003/A1:2005 as implemented nationally by MSA EN 771-

3:2003/A1:2005

Specification for masonry units – Part 1: Clay masonry units

EN 771-2:2003/A1:2005 as implemented nationally by MSA EN 771-

2:2003/A1:2005

Specification for masonry units – part 2: Calcium silicate masonry units

EN 771-3:2003/A1:2005 as implemented nationally by MSA EN 771-

3:2003/A1:2005

Specification for masonry units – Part 3: Aggregate concrete masonry units – Part 3

Aggregate concrete masonry units (Dense and light-weight aggregates)

EN 771-4:2003/A1:2005 as implemented nationally by MSA EN 771-

4:2003/A1:2005

Specification for masonry units – Part 4: Autoclaved aerated concrete masonry units

EN 771-5:2003/A1:2005 as implemented nationally by MSA EN 771-

5:2003/A1:2005

Specification for masonry units – Part 5: Manufactured stone masonry units

EN 845-1:2003 as implemented nationally by MSA EN 845-1:2003

Specification for ancillary components for masonry - Part 1: Ties, tension straps,

hangers and brackets

EN 845-2:2003 as implemented nationally by MSA EN 845-2:2003

Specification for ancillary components for masonry - Part 2: Lintels

EN 845-3:2003 as implemented nationally by MSA EN 845-3:2003

Specification for ancillary components for masonry - Part 3: Bed joint reinforcement

of steel meshwork

EN 934-2:2001/A1:2004 as implemented nationally by MSA EN 934-

2:2001/A1:2004

Admixtures for concrete, mortar and grout-Part 2: Concrete admixtures-Definitions,

requirements, conformity, marking and labelling

EN 934-3:2003/AC:2005 as implemented nationally by MSA EN 934-

3:2003/AC:2005

Admixtures for conrete, mortar and grout – Part 3: Admixtures for masonry mortar –

Definitions, requirements, conformity, marking and labelling

EN 934-4:2001 as implemented nationally by MSA EN 934-4:2001

Admixtures for concrete, mortar and grout-Part 4: Admixtures for grout for

prestressing tendons-Definitions, requirements, conformity, marking and labelling

EN 998-1:2003 as implemented nationally by MSA EN 998-1:2003

Specification for mortar for masonry - Part 1: Rendering and plastering mortar

EN 998-2:2003 as implemented nationally by MSA EN 998-2:2003

Specification for mortar for masonry - Part 2: Masonry mortar

EN 1123-1:1999/A1:2004 as implemented nationally by MSA EN 1123-

1:1999/A1:2004

Pipes and fitting of longitudinally welded hot-dip galvanized steel pipes with spigot

and socket for waste water systems – Part 1: Requirements, testing, quality control

EN 1124-1:1999/A1:2004 as implemented nationally by MSA EN 1124-

1:1999/A1:2004

Pipes and fitting of longitudinally welded stainless steel pipes with spigot and socket

for waste water systems – Part 1: Requirements, testing, quality control

EN 1125:1997/A1:2001/AC:2002 as implemented nationally by MSA EN

1125:2000/A1:2002/AC:2002

Building hardware-Panic exit devices operated by a horizontal bar-Requirements and

test methods

EN 1154:1996/A1:2002 as implemented nationally by MSA EN

1154:1996/A1:2002

Building hardware - Controlled door closing devices - Requirements and test methods

EN 1155:1997/A1:2002 as implemented nationally by MSA EN

1155:1997/A1:2002

Building hardware - Electrically powered hold-open devices for swing doors -

Requirements and test methods

EN 1158:1997/A1:2002/AC:2006 as implemented nationally by MSA EN

1158:1997/A1:2002/AC:2006

Building hardware - Door coordinator devices - Requirements and test methods

EN 1337-4:2004 as implemented nationally by MSA EN 1337-4:2004

Structural bearings – Part 4: Roller bearings

EN 1337-6:2004 as implemented nationally by MSA EN 1337-6:2004

Structural bearings – Part 6: Rocker bearings

EN 1337-7:2004 as implemented nationally by MSA EN 1337-7:2004

Structural bearings-Part 7: Spherical and cylindrical PTFE bearings

EN 1338:2003 as implemented nationally by MSA EN 1338:2003

Concrete paving blocks - Requirements and test methods

EN 1339:2003 as implemented nationally by MSA EN 1339:2003

Concrete paving flags – Requirements and test methods

EN 1340:2003 as implemented nationally by MSA EN 1340:2003

Concrete kerb units – Requirements and test methods

EN 1341:2001 as implemented nationally by MSA EN 1341:2002

Slabs of natural stone for external paving-Requirements and test methods

EN 1342:2001 as implemented nationally by MSA EN 1342:2002

Setts of natural stone for external paving-Requirements and test methods

EN 1343:2001 as implemented nationally by MSA EN 1343:2002

Kerbs of natural stone for external paving-Requirements and test methods

EN 1344:2002 as implemented nationally by MSA EN 1344:2002

Clay pavers - Requirements and test methods

EN 1423:1997/A1:2003 as implemented nationally by MSA EN

1423:1997/A1:2003

Road marking materials – Drop on materials – Glass beads, antiskid aggregates and

mixtures of the two

EN 1433:2002/A1:2005 as implemented nationally by MSA EN

1433:2002/A1:2005

Drainage channels for vehicular and pedestrian areas – Classification, design and

testing requirements, marking and evaluation of conformity

EN 1457:1999/AC:1999/A1:2002 as implemented nationally by MSA EN

1457:1999/AC:1999/A1:2002

Chimneys – Clay/ceramic flue liners – Requirements and test methods

EN 1520:2002 as implemented nationally by MSA EN 1520:2003

Prefabricated reinforced components of lightweight aggregate concrete with open

structure

EN 1856-1:2003 as implemented nationally by MSA EN 1856-1:2003

Chimneys - Requirements for metal chimneys - Part 1: System chimney products

EN 1857:2003 as implemented nationally by MSA EN 1857:2003

Chimneys – Components – Concrete flue liners

EN 1858:2003 as implemented nationally by MSA EN 1858:2003

Chimneys – Components – Concrete flue blocks

EN 1916:2002 as implemented nationally by MSA EN 1916:2002

Concrete pipes and fittings, unreinforced, steel fibre and reinforced

EN 1917:2002 as implemented nationally by MSA EN 1917:2002

Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

EN 1935:2002 as implemented nationally by MSA EN 1935:2002

Building hardware-Single-axis hinges-Requirements and test methods

EN 12004:2001/A1:2002/AC:2002 as implemented nationally by MSA EN

12004:2001/A1:2002/AC:2002

Adhesives for tiles - Definitions and specifications

EN 12050-1:2001 as implemented nationally by MSA EN 12050-1:2001

Wastewater lifting plants for buildings and sites-Principles of construction and

testing-Part 1: Lifting plants for wastewater containing faecal matter

EN 12050-2:2000 as implemented nationally by MSA EN 12050-2:2001

Wastewater lifting plants for buildings and sites-Principles of construction and

testing-Part 2: Lifting plants for faecal-free wastewater

EN 12050-3:2000 as implemented nationally by MSA EN 12050-3:2001

Wastewater lifting plants for buildings and sites-Principles of construction and

testing-Part 3: Lifting plants for wastewater containing faecal matter for limited

applications

EN 12050-4:2000 as implemented nationally by MSA EN 12050-4:2000

Wastewater lifting plants for buildings and sites-Principles of construction and

testing-Part 4: Non-return valves for faecal-free wastewater and wastewater

containing faecal matter

EN 12094-1:2003 as implemented nationally by MSA EN 12094-1:2003

Fixed firefighting systems – Components for gas extinguishing systems – Part 1

Requirements and test methods for electrical automatic control and delay devices

EN 12094-2:2003 as implemented nationally by MSA EN 12094-2:2003

Fixed firefighting systems – Components for gas extinguishing systems – Part 2

Requirements and test methods for non-electrical automatic control and delay devices

EN 12094-3:2003 as implemented nationally by MSA EN 12094-3:2003

Fixed firefighting systems – Components for gas extinguishing systems – Part 3

Requirements and test methods for manual triggering and stop devices

EN 12094-5:2000 as implemented nationally by MSA EN 12094-5:2001

Fixed firefighting systems - Componenets for gas extinguishing systems - Part 5

Requirements and test methods for high and low pressure selector valves and their

actuators for CO2 systems

EN 12094-6:2000 as implemented nationally by MSA EN 12094-6:2001

Fixed firefighting systems - Components for gas extinguishing systems - Part 6

Requirements and test methods for non-electrical disable devices for CO2 systems

EN 12094-7:2000/A1:2005 as implemented nationally by MSA EN 12094-

7:2001/A1:2005

Fixed firefighting systems - Components for gas extinguishing systems - Part 7

Requirements and test methods for nozzles for CO2 systems

EN 12094-9:2003 as implemented nationally by MSA EN 12094-9:2003

Fixed firefighting systems – Components for gas extinguishing systems – Part 9

Requirements and test methods for special fire detectors

EN 12094-10:2003 as implemented nationally by MSA EN 12094-10:2003

Fixed firefighting systems – Componenets for gas extinguishing systems – Part 10

Requirements and test methods for pressure gauges and pressure switches

EN 12094-11:2003 as implemented nationally by MSA EN 12094-11:2003

Fixed firefighting systems – Components for gas extinguishing systems – Part 11

Requirements and test methods for mechanical weighing devices

EN 12094-12:2003 as implemented nationally by MSA EN 12094-12:2003

Fixed firefighting systems – Components for gas extinguishing systems – Part 12

Requirements and test methods for pneumatic alarm devices

EN 12094-13:2001 as implemented nationally by MSA EN 12094-13:2001

Fixed firefighting systems - Components for gas extinguishing systems - Part 13

Requirements and test methods for check valves and non-return valves

EN 12101-3:2002 as implemented nationally by MSA EN 12101-3:2002

Smoke and heat control systems - Part 3: Specification for powered smoke and heat

exhaust ventilators

EN 12209:2003/AC:2005 as implemented nationally by MSA EN

12209:2003/AC:2005

Building hardware – Locks and latches – Mechanically operated locks, latches and

locking plates – Requirements and test methods

EN 12259-1:1999 + A1:2001/A2:2004 as implemented nationally by MSA EN

12259-1:1999 + A1:2001/A2:2004

Fixed firefighting systems – Components for sprinkler and water spray systems – Part

1: Sprinklers

EN 12259-2:1999/AC:2002 as implemented nationally by MSA EN 12259-

2:1999/AC:2002

Fixed firefighting systems – Components for sprinkler and water spray systems – Part

2: Wet alarm valve assemblies

EN 12259-4:2000/A1:2001 as implemented nationally by MSA EN 12259-

4:2000/A1:2001

Fixed firefighting systems - Components for sprinkler and water spray systems - Part

4: Water motor alarms

EN 12259-5:2002 as implemented nationally by MSA EN 12259-5:2002

Fixed firefighting systems – Components for sprinkler and water spray systems – Part

5: Water flow detectors

EN 12380:2002 as implemented nationally by MSA EN 12380:2003

Air admittance valves for drainage systems - Requirements, tests methods and

evaluation of conformity

EN 12416-1:2001/A1:2004 as implemented nationally by MSA EN 12416-

1:2001/A1:2004

Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods

for components

EN 12416-2:2001 as implemented nationally by MSA EN 12416-2:2001

Fixed firefighting systems - Powder systems - Part 2: Design, construction and

maintenance

EN 12446:2003 as implemented nationally by MSA EN 12446:2003

Chimneys - Components - Concrete outer wall elements

EN 12566-1:2000/A1:2003 as implemented nationally by MSA EN 12566-

1:2000/A1:2003

Small wastewater treatment systems for up to 50 PT – Part 1: Prefabricated septic

tanks

EN 12620:2002 as implemented nationally by MSA EN 12620:2002

Aggregates for concrete

EN 12676-1:2000/A1:2003 as implemented nationally by MSA EN 12676-

1:2000/A1:2003

Anti-glare systems for roads – Part 1: Performance and characteristics

EN 12809:2001/AC:2003 as implemented nationally by MSA EN

12809:2001/AC:2003

Residential independent boilers fired by solid fuel – Nominal heat output up to 50 kW

– Requirements and test methods

EN 12815:2001/AC:2003 as implemented nationally by MSA

EN

12815:2001/AC:2003

Residential cookers fired by solid fuel – Requirements and test methods

EN 12839:2001 as implemented nationally by MSA EN 12839:2001

Precast concrete products - Elements for fences

EN 12859:2001/A1:2004 as implemented nationally

by

MSA

EN

12859:2001/A1:2004

Gypsum blocks - Definitions, requirements and test methods

EN 12860:2001 as implemented nationally by MSA EN 12860:2001

Gypsum based adhesives for gypsum blocks - Definitions, requirements and test

methods

EN 13043:2002/AC:2004 as implemented nationally by MSA EN

13043:2002/AC:2004

Aggregates for bituminous mixtures and surface treatments for roads, airfields and

othertrafficked areas

EN 13055-1:2002 as implemented nationally by MSA EN 13055-1:2002

Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and

grout

EN 13055-2:2004 as implemented nationally by MSA EN 13055-2:2004

Lightweight aggregates – Part 2: Lightweight aggregates for bituminous mixtures and

surface treatments and for unbound and bound applications

EN 13101:2002 as implemented nationally by MSA EN 13101:2002

Steps for underground man entry chambers - Requirements, marking, testing and

evaluation of conformity

EN 13139:2002 as implemented nationally by MSA EN 13139:2002

Aggregates for mortar

EN 13160-1:2003 as implemented nationally by MSA EN 13160-1:2003

Leak detection systems - Part 1: General principles

EN 13162:2001/AC:2005 as implemented nationally by MSA EN

13162:2001/AC:2005

Thermal insulation products for buildings - Factory made mineral wool (MW)

products - Specification

EN 13163:2001/AC:2005 as implemented nationally by MSA EN

13163:2001/AC:2005

Thermal insulation products for buildings - Factory made products of expanded

polystyrene (EPS) - Specification

EN 13164:2001/A1:2004/AC:2005 as implemented nationally by MSA EN

13164:2001/A1:2004/AC:2005

Thermal insulation products for buildings - Factory made products of extruded

polystyrene foam (XPS) – Specification

EN 13165:2001/A1:2004/AC:2005 as implemented nationally by MSA EN

13165:2001/A1:2004/AC:2005

Thermal insulation products for buildings - Factory made rigid polyurethane foam

(PUR) products - Specification

EN 13166:2001/A1:2004/AC:2005 as implemented nationally by MSA EN

13166:2001/A1:2004/AC:2005

Thermal insulation products for buildings - Factory made products pf phenolic foam

(PF) - Specification

EN 13167:2001/A1:2004/AC:2005 as implemented nationally by MSA EN

13167:2001/A1:2004/AC:2005

Thermal insulation products for buildings - Factory made products pf phenolic foam

(PF) - Specification

EN 13168:2001/A1:2004/AC:2005 as implemented nationally by MSA EN

13168:2001/A1:2004/AC:2005

Thermal insulation products for buildings - Factory made wood wool (WW) products

- Specification

EN 13169:2001/A1:2004/AC:2005 as implemented nationally by MSA EN

13169:2001/A1:2004/AC:2005

Thermal insulation products for buildings - Factory made products of expanded

perlite (EPB) - Specification

EN 13170:2001/AC:2005 as implemented nationally by MSA EN

13170:2001/AC:2005

Thermal insulation products for buildings-Factory made products of expanded cork

(ICB)-Specification

EN 13171:2001/A1:2004/AC:2005 as implemented nationally by MSA EN

13171:2001/A1:2004/AC:2005

Thermal insulation products for buildings - Factory made wood fibre (WF) products –

Specification

EN 13224:2004/AC:2005 as implemented

nationally

by

MSA

EN

13224:2004/AC:2005

Precast concrete products – Ribbed floor elements

EN 13229:2001/AC:2003 as implemented nationally by MSA EN

13229:2001/AC:2003

Inset appliances including open fires fired by solid fuels – Requirements and test

methods

EN 13240:2001/AC:2003 as implemented nationally

by

MSA

EN

13240:2001/AC:2003

Room heaters fired by solid fuel – Requirement and test methods

EN 13241-1:2003 as implemented nationally by MSA EN 13241-1:2003

Industrial, commercial and garage doors and gates - Product standard - Part 1

Products without fire resistance or smoke control characteristics

EN 13242:2002 as implemented nationally by MSA EN 13242:2003

Aggregates for unbound and hydraulically bound materials for use in civil

engineering work and road construction

EN 13249:2000 as implemented nationally by MSA EN 13249:2001

Geotextiles and geotextile-related products -Characteristics required for use in the

construction of roads and other trafficked areas (excluding railways and asphalt

inclusion)

EN 13250:2000 as implemented nationally by MSA EN 13250:2001

Required characteristics for geotextiles and geotextile-related products used in the

construction of railways

EN 13251:2000 as implemented nationally by MSA EN 13251:2001

Geotextiles and geotextile-related products-Characteristics required for use in

earthworks, foundations and retaining structures

EN 13252:2000 as implemented nationally by MSA EN 13252:2001

Geotextiles and geotextile-related products-Characteristics required for use in

drainage systems

EN 13253:2000 as implemented nationally by MSA EN 13253:2001

Geotextiles and geotextile-related products - Characteristics required for use in

erosion control works (coastal protection, bank revetments)

EN 13254:2000/AC:2003 as implemented nationally by MSA EN

13254:2001/AC:2003

Geotextiles and geotextile related products-Characteristics required for use in the

construction of reservoirs and dams

EN 13255:2000/AC:2003 as implemented nationally by MSA EN

13255:2001/AC:2003

Geotextiles and geotextile-related products-Characteristics required for use in the

construction of canals’

EN 13256:2000/AC:2003 as implemented nationally by MSA EN

13256:2001/AC:2003

Geotextiles and geotextile-related products-Characteristics required for use in the

construction of tunnels and underground structures

EN 13257:2000/AC:2003 as implemented nationally by MSA EN

13257:2001/AC:2003

Geotextiles and geotextile-related products - Characteristics required for use in solid

waste disposals

EN 13265:2000/AC:2003 as implemented nationally by MSA EN

13265:2001/AC:2003

Geotextiles and geotextile-related products - Characteristics required for use in liquid

waste containment projects

EN 13310:2003 as implemented nationally by MSA EN 13310:2003

Kitchen sinks - Functional requirements and test methods

EN 13383-1:2002 as implemented nationally by MSA EN 13383-1:2002

Armourstone - Part 1: Specification

EN 13450:2002 as implemented nationally by MSA EN 13450:2003

Aggregates for railway ballast

EN 13502:2002 as implemented nationally by MSA EN 13502:2002

Chimneys - Requirements and test methods for clay/ceramic flue terminals

EN 13561:2004 as implemented nationally by MSA EN 13561:2004

External blinds – Performance requirements including safety

EN 13564-1:2002 as implemented nationally by MSA EN 13564-1:2002

Anti-flooding devices for buildings - Part 1: Requirements

EN 13616:2004/AC:2006 as implemented nationally by

13616:2004/AC:2006

Overfill prevention devices for static tanks for liquid petroleum fuels

EN 13659:2004 as implemented nationally by MSA EN 13659:2004

Shutters – Performance requirements including safety

EN 13748-1:2004/AC:2005 as implemented nationally by MSA EN 13748-

1:2004/AC:2005

Terrazzo tiles – Part 1: Terrazzo tiles for internal use

EN 13748-2:2004 as implemented nationally by MSA EN 13748-2:2004

Screed materials and floor screeds – Screed material – Properties and requirements

EN 13830:2003 as implemented nationally by MSA EN 13830:2003

Curtain walling – Product standard

EN 13813:2002 as implemented nationally by MSA EN 13813:2002

Screed material and floor screeds - Screed material - Properties and requirements

EN 13830:2003 as implemented nationally by MSA EN 13830:2003

Curtain walling – Product standard

EN 13986:2004 as implemented nationally by MSA EN 13986:2004

Wood-based panels for use in construction - Characteristics, evaluation of conformity

and marking

EN 14016-1:2004 as implemented nationally by MSA EN 14016-1:2004

Binders for magnesite screeds – Caustic magnesia and magnesium chloride – Part 1

Definitions, requirements

EN 14037-1:2003 as implemented nationally by MSA EN 14037-1:2003

Ceiling mounted radiant panels supplied with water at temperature below 120 °C -

Part 1: Technical specifications and requirements

EN 14041:2004/AC:2005 as implemented nationally by MSA

14041:2004/AC:2005

Resilient, textile and laminate floor coverings – Essential characteristics

EN 14063-1:2004 as implemented nationally by MSA EN 14063-1:2004

Thermal insulation materials and products – In-situ formed expanded clay lightweight

aggregate products (LWA) – Part 1: Specification for the loose-fill products before

installation

EN 14216:2004 as implemented nationally by MSA EN 14216:2004

Cement – Composition, specifications and conformity criteria for very low heat

special cements

EN 14316-1:2004 as implemented nationally by MSA EN 14316-1:2004

Thermal insulation products for buildings – In-situ thermal insulation formed foam

expanded perlite (EP) products – Part 1: Specification for bonded and loose-fill

products before installation

EN 14317-1:2004 as implemented nationally by MSA EN 14317-1:2004

Thermal insulation products for buildings – In-situ thermal insulation formed from

exfoliated vermiculite (EV) products – Part 1: Specification for bonded and loose-fill

products before installation

EN 14396:2004 as implemented nationally by MSA EN 14396:2004

Fixed ladders for manholes

EN 14411:2003 as implemented nationally by MSA EN 14411:2003

Ceramic tiles – Definitions, classification, characteristics and marking (ISO

13006:1998, modified)

EN 14449:2005/AC:2005 as implemented nationally by MSA EN

14449:2005/AC:2005

Glass in building – Laminated glass and laminated safety glass – Evaluation of

conformity/Product standard

EN 14449:2005 as implemented nationally by MSA EN 14449:2005

Glass in building - Laminated glass and laminated safety glass - Evaluation of

conformity/Product standard

EN 14471:2005 as implemented nationally by MSA EN 14471:2005

Chimneys - System chimneys with plastic flue liners - Requirements and test methods

EN 14496:2005 as implemented nationally by MSA EN 14496:2005

Gypsum based adhesives for thermal/acoustic insulation composite panels and

plasterboards - Definitions, requirements and test methods

EN 14528:2005 as implemented nationally by MSA EN 14528:2005

Bidets - Functional requirements and test methods

EN 14604:2005 as implemented nationally by MSA EN 14604:2005

Smoke alarm devices

EN 14647:2005 as implemented nationally by MSA EN 14647:2005

Calcium aluminate cement - Composition, specifications and conformity criteria

EN 14716:2004 as implemented nationally by MSA EN 14716:2004

Stretched ceilings - Requirements and test methods

EN 14782:2006 as implemented nationally by MSA EN 14782:2006

Self-supporting metal sheet for roofing, external cladding and internal lining - Product

specification and requirements

EN 14783:2006 as implemented nationally by MSA EN 14783:2006

Fully supported metal sheet and strip for roofing, external cladding and internal lining

- Product specification and requirements

EN 14844:2006 as implemented nationally by MSA EN 14844:2006

Precast concrete products - Box culverts

EN 14889-1:2006 as implemented nationally by MSA EN 14889-1:2006

Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity

EN 14889-2:2006 as implemented nationally by MSA EN 14889-2:2006

Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and

conformity

EN 14904:2006 as implemented nationally by MSA EN 14904:2006

Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification

EN 14909:2006 as implemented nationally by MSA EN 14909:2006

Flexible sheets for waterproofing - Plastic and rubber damp proof courses -

Definitions and characteristics

EN 14915:2006 as implemented nationally by MSA EN 14915:2006

Solid wood panelling and cladding - Characteristics, evaluation of conformity and

marking

EN 14967:2006 as implemented nationally by MSA EN 14967:2006

Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and

characteristics

EN 15088:2005 as implemented nationally by MSA EN 15088:2005

Aluminium and aluminium alloys - Structural products for construction works -

Technical conditions for inspection and delivery

Mitbug[ fl-Istamperija tal-Gvern — Printed at the Government Printing Press