MT
Construction Products (Amendment) Regulations, 2007
Table of Provisions (202)
Statutory Text (202 Articles)
Suppliment tal-Gazzetta tal-Gvern ta’ Malta, Nru. 18,018, 12 ta’ Jannar, 2007
L.N. 6 of 2007
PRODUCT SAFETY ACT
(CAP. 427)
Construction Products (Amendment) Regulations, 2007
IN exercise of the powers conferred by articles 38 to 40 of the
Product Safety Act, the Minister for Competitiveness and
Communications, on the advice of the Malta Standards Authority, has
made the following regulations>–
The title of these regulations is the Construction Products Citation.
(Amendment) Regulations, 2007, and they shall be read and construed
as one with the Construction Products Regulations, 2001, hereinafter L.N. 270 of 2001.
referred to as “the principal regulations”.
For Schedule III to the principal regulations, there shall be Amends Schedule
III to the principal
substituted the following>
regulations.
“Schedule III
Comprehensive table of legal measures taken related to the Construction
Products Directive 89/106/EEC
Reference
Measure
Number
Common procedural rules for European Technical
94/23/EC
Approval (ETA)
Communication of the Commission with regard to the
94/C 62/01
interpretative documents of Council Directive
89/106/EEC
Communication of the Commission as part of the
implementation of Council Directive 89/106/EEC on
construction products as amended by Directive
93/68/EEC
94/C 206/04
Publication for information purposes of the names of
bodies authorised to issue European Technical
Approvals
Communication of the Commission as part of the
implementation of Council Directive 89/106/EEC on
construction products as amended by Directive
93/68/EEC
Publication for information purposes of the names of
bodies authorised to issue European Technical
Approvals
Commission Decision of 4 October 1996 establishing
the list of products belonging to class A 'No
contribution to Fire' provided for in Decision 94/611/EC L267
implementing Article 20 of Council Directive
89/106/EEC on construction products
Commission Decision of 22 July 1997 on the general
format of European Technical Approval for
Construction Products
Communication of the Commission as part of the
implementation of Council Directive 89/106/EEC on
construction products as amended by Directive
93/68/EEC
Publication for information purposes of the names of
bodies authorised to issue European Technical
Approvals
Commission Decision of 3 July 1998 concerning the
Test of the Single Burning Item (SBI) referred to in
Decision 94/611/EC implementing Article 20 of
Council Directive 89/106/EEC on construction products
(notified under document number C(1998) 1743)
Commission Decision of 8 February 2000 implementing
Council Directive 89/106/EEC as regards the
classification of the reaction to fire performance of
construction products 2
Commission Decision of 27 March 2000 on the
procedure for attesting the conformity of construction
products pursuant to Article 20(2) of Commission
Directive 89/106/EEC as regards seven products for
European Technical Approvals without Guideline
1 As amended by Corrigendum published in OJ No. L156/60 of 13/06/1997 and by Commission
Decision 2000/605/EC published on OJ No. L258 of 12/10/2000 and Commission Decision
2003/424/EC published in OJ No. L144 of 12/06/2003.
2 As amended by (Corrigendum) published in OJ No. L085/43 of 24/03/2001 and Commission
Decision 2003/632/EC published in OJ No. L220 of 03/09/2003.
Commission Decision of 3 May 2000 implementing
Council Directive 89/106/EEC as regards the
classification of the resistance to fire performance of
L133 06/06/2000
construction products, construction works and parts
thereof 3
Commission Decision of 9 September 2000
implementing Council Directive 89/106/EEC as regards
L235 19/09/2000
the external fire performance of roof coverings
Commission Decision of 26 September 2000 amending
Decision 96/603/EC establishing the list of products
belonging to Classes A ‘No contribution to fire’
L258 12/10/2000
provided for in Decision 94/611/EC implementing
Article 20 of Council Directive 89/106/EEC on
construction products
Commission Decision of 21 August 2001 implementing
Council Directive 89/106/EEC as regards the
L235 04/09/2001
classification of the external fire performance of roofs
and roof coverings
Commission Decision of 17 January 2003 establishing
the classes of reaction-to-fire performance for certain
L013 18/01/2003
construction products 4
Commission Decision of 6 June 2003 amending
Decision 96/603/EC establishing the list of products
L144 12/06/2003
belonging to Classes A ‘No contribution to fire’
provided for in Decision 94/611/EC
Commission Decision of 7 August 2003 amending
Decision 2003/43/EC establishing the classes of
L201 08/08/2003
reaction-to-fire performance of certain construction
products
Commission Decision of 26 August 2003 amending
Decisison 2000/147/EC implementing Council
Directive 89/106/EEC as regards the classification of
L220 03/09/2003
the reaction-to-fire performance of construction
products
Commission Decision of 12 September 2003 on the
L231 17/09/2003
procedure for attesting the conformity of construction
products pursuant to Article 20(2) of Council Directive
3 As amended by Commission Decision 2003/629/EC published in OJ No. L218 of 30/08/2003 and by
(Corrigendum) published in OJ No. L219 of 14/08/2001.
4 As amended by Commission Decision 2003/593/EC of 7 th August 2003 published in OJ No. L201 of
08/08/2003 and by (Corrigendum) published in OJ No. L33 of 08/02/2003.
89/106/EEC as regards seven products for European
Technical approvals without Guideline
Commission Decision of 27 August 2003 amending
Decision 2000/367/EC establishing a classification
system for resistance-to-fire performance for
L218 30/08/2003
construction products, as regards the inclusion of smoke
and heat control products
Commission Communication in the framework of the
C319 14/12/2005
implementation of the Council Directive 89/106/EEC
Commission Decision of 6 March 2006 establishing the
classes of reaction-to-fire performance for certain
L 79 16/03/2006
construction products as regards wood flooring and
solid wood panelling and cladding
For harmonised standards
Decision Number Products covered
Official Journal
Precast concrete products, Thermal Insulating products,
14/07/95
Membranes, Doors, Windows and related products 5
Gypsum products, Structural Bearings, Chimneys,
10/11/95
Flues and specific products 6
Fixed Fire fighting systems
08/10/96
Sanitary appliances
08/10/96
Circulation Fixtures 7
08/10/96
Curtain walling
08/10/96
Geotextiles
08/10/96
Structural timber products
14/03/97
Wood based panels 8
25/07/97
5 As amended by Corrigendum published in OJ No. L217/31 of 13/09/1995.
6 As amended by Corrigendum published in OJ No. L070/44 of 20/03/1996.
7 As amended by Commission Decision 1999/453/EC of 18 th June 1999 published in OJ No. L178/50
* Amended by Commission Decision 2001/596/EC of 8 th January 2001 published in OJ No. L209 of
Waste water engineering products 9
97/464/EC
97/555/EC
Cement, Building limes and other hydraulic binders
97/597/EC
Reinforcing and prestressing steel for concrete
97/638/EC
Fasteners for Structural timber
97/740/EC *
Masonry products
97/808/EC *
Floorings 5
98/214/EC *
Structural metallic products and ancillaries
98/436/EC *
Roof coverings, rooflights, roof windows and
ancillary 10
98/437/EC *
Internal and external wall and ceiling finishes 11
98/598/EC *
Aggregates
98/601/EC *
Road construction products
99/90/EC *
Membranes (revision of decision 95/204/EC) 12
Thermal insulating products (revision of decision
99/91/EC *
95/204/EC) 10
Doors, windows, shutter, blinds, gates and related
99/93/EC
building hardware (revision of decision 95/204/EC) 10
Precast normal/lightweight/autoclaved aerated concrete
99/94/EC
products (revision of decision 95/204/EC) 10
Commission Decision of 18 June 1999 amending
Decisions 96/579/EC and 97/808/EC on the procedure
for attesting the conformity of construction products
99/453/EC
pursuant to Article 20(2) of Council Directive
89/106/EEC as regards circulation fixtures and
floorings respectively
99/469/EC *
Products related to concrete, mortar and grout
8 As amended by Corrigendum L017/46 of 21/01/1998.
9 As amended by Commission Decision 2004/663/EC of 20 th September 2004 published in OJ No.
L302 of 29/09/2004.
10 As amended by Corrigendum published in OJ No. L168/36 of 03/07/1999.
11 As amended by Corrigendum published in OJ No. L278/51 of 15/10/1998.
12 As amended by Corrigendum published in OJ No. L083/80 of 27/03/1999.
Construction Adhesives
Space heating appliances
Pipes, tanks and ancillaries not in contact with water
intended for human consumption
Flat glass, profiled glass and glass block products
Commission Decision of 8 January 2001 amending
Decisions 95/467/EC, 96/578/EC, 96/580/EC,
97/176/EC, 97/462/EC, 97/556/EC, 97/740/EC,
97/808/EC, 98/213/EC, 98/214/EC, 98/279/EC,
98/436/EC, 98/437/EC, 98/599/EC, 98/600/EC,
98/601/EC, 1999/89/EC, 1999/90/EC, 1999/91/EC,
1999/454/EC, 1999/469/EC, 1999/470/EC,
1999/471/EC, 1999/472/EC, 2000/245/EC,
2000/273/EC and 2000/447/EC on the procedure for
attesting the conformity of certain construction products
pursuant to Article 20 of Council Directive 89/106/EEC
Construction products in contact with water intended
for human consumption
Commission Decision of 15 July 2002 amending
Decisions 95/467/EC, 96/577/EC, 96/578/EC and
98/598/EC on the procedure for attesting the conformity
of construction products pursuant to Article 20(2) of
Council Directive 89/106/EEC as regards gypsum
products, fixed fire-fighting systems, sanitary
appliances and aggregates respectively
Thermal insulation products, geotextiles, fixed fire-
fighting equipment and gypsum blocks
Floorings
For ETA Guidelines
Decision Number Description
Structural Sealant Glazing Systems and Metal Anchors
for Concrete (Heavy duty uses)
Metal Anchors for use in concrete for fixing lightweight
systems
Metal Anchors for Masonry
Plastic Anchors for use in Concrete and Masonry
External thermal insulation composite systems/Kits
with rendering (ETICS)
Mechanically fastened flexible roof waterproofing
membranes
Internal partition kits
Non-load-bearing permanent shuttering kits/systems
Post tensioning kits for the prestressing of structures 13
Liquid applied roof waterproofing kits
Self-supporting translucent roof kits (except glass-based
kits)
Prefabricated stair kits
Light composite wood-based beams and columns
Fire stopping, fire sealing and fire protective products
Timber frame and log prefabricated building kits
Prefabricated wood-based load-bearing stressed skin
panels and self-supporting composite lightweight panels
Six products for European Technical Approvals without
Guideline
Expansion joints for road bridges
Vetures
Metal frame building kits, concrete frame building kits,
prefabricated building units, cold storage room kits and
rock-fall protection kits
Liquid-applied bridge deck waterproofing kits
Pins for structural joints
Kits for exterior wall claddings
13 As amended by Corrigendum published in OJ No. L313 of 21/11/1998.
Watertight covering kits for wetroom floors and walls
Description
Metal anchors for use in Concrete Part 1: Anchors in
general
Metal anchors for use in Concrete Part 2: Torque-
controlled expansion anchors
Metal anchors for use in Concrete Part 3: Undercut
anchors
Metal anchors for use in Concrete Part 4: Deformation-
controlled expansion anchors
Metal anchors for use in Concrete Part 5: Bonded
anchors
Metal anchors for use in concrete Part 56: Anchors for
multiple use for non-structural applications
Structural sealant glazing systems Part 1: Supported
and unsupported systems
Structural sealant glazing systems Part 2: Coated
aluminium systems
Structural sealant glazing systems Part 3: Thermal
breaks
Internal partition kits for use as non loadbearing walls
External thermal insulation composite systems with
rendering
Liquid applied roof waterproofing kits
Systems of mechanically fastened flexible roof
waterproofing membranes
Timber-frame building kits
14 The full text of the ETAGs may be downloaded from the EOTA website (http://www.eota.be) under
‘Endorsed ETAG’s’.
Prefabricated stairs kits
Non-load-bearing permanent shuttering kits/systems
based on hollow blocks or panels of insulating
materials and sometimes concrete
Self supporting translucent roof kits
Light composite wood-based beams and columns
Log building kits
Post tensioning kits for pre-stressing of structures
Plastic anchors for ETICS
Three dimensional nailing plates
Composite light weight panels Part 1
Composite light weight panels Part 2
Composite light weight panels Part 3
Composite light weight panels Part 4
Veture Kits
Fire protective products Part 1: General
Fire protective products Part 2: Reactive coatings for
fire protection of steel elements
Fire protective products Part 3: Renderings and
Rendering Kits intended for Fire Resisting
Applications
Fire protective products Part 4: Fire protective board,
slab and mat products and kits
Pre-fabricated wood-based loadbearing stressed skin
panels
Plastic anchors for multiple use in concrete and
masonry for non-structural applications Part 1: General
Plastic anchors for multiple use in concrete and
masonry for non-structural applications Part 2: Plastic
anchors for use in normal weight concrete
Plastic anchors for multiple use in concrete and
masonry for non-structural applications Part 3: Plastic
anchors for use in solid masonry
Plastic anchors for multiple use in concrete and
masonry for non-structural applications Part 4: Plastic
anchors for use in hollow perforated masonry
Plastic anchors for multiple use in concrete and
masonry for non-structural applications Part 5: Plastic
anchors for use in autoclaved aerated concrete
Plastic anchors for multiple use in concrete and
masonry for non-structural applications Annex A
Details of tests
Plastic anchors for multiple use in concrete and
masonry for non-structural applications Annex B
Recommendations for tests to be carried out on
construction works
Plastic anchors for multiple use in concrete and
masonry for non-structural applications Annex C
Design methods for anchorages
Cold Storage Premises kits Part 1: Cold Storage Room
Kits Part 2: Cold Storage Building Envelope and
Building Kits Annexes Part 1
Concrete Frame Building Kits
Metal Frame Building Kits
Issued ETAs by virtue of the above guidelines
Description
Torque-controlled expansion anchor made of
galvanized steel of sizes M8, M10, M12, M16, M20
and M24 for use in concrete
Torque-controlled expansion anchor made of stainless
steel of sizes M8, M10, M12, M16, M20 and M24 for
use in concrete
Torque-controlled expansion anchor, made of zinc
electroplated steel, for use in concrete: sizes M8, M10,
M12, M16 and M20.
Undercut anchor made of galvanized steel of sizes M6,
M8, M10, M12 and M16 for use in concrete.
Undercut anchor made of stainless steel of sizes M6,
M8, M10, M12 and M16 for use in concrete.
Thermal and/or acoustic insulation boards and thermal
and/or acoustic insulation material made of flax, jute
and polyester fibres
Torque-controlled expansion anchor, made of zinc
electroplated steel, for use in non cracked concrete
sizes M8, M10, M12, M16 and M20
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M6, M8, M10, M12, M16 and M20
Torque-controlled expansion anchor, made of zinc
electroplated steel, for use in concrete: sizes M8, M10,
M12 and M16
Torque-controlled expansion anchor made of
galvanized steel of sizes M6, M8, M10, M12 and M16
for use in concrete
Special anchor made of stainless steel for the fastening
of additional securing in a permanent manner of
external weather resistant skins of three-layer external
wall panels made of concrete
Torque-controlled expansion anchor, made of stainless
steel, for use in non-cracked concrete: sizes M6, M8,
M10 and M12.
Self-cutting undercut anchor, made of galvanised steel,
for use in concrete: sizes M10, M12 and M16.
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete.
Torque controlled expansion anchor made of stainless
steel of sizes M8,M10,M12 and M16 for use in
concrete
Trap with partially mechanical closure, mounted in a
non-trapped gully.
Torque controlled expansion anchor made of zinc
electroplated steel, for use in non-cracked concrete
sizes M8, M10, M12, M16 and M20
Torque controlled expansion anchor made of
galvanized steel of sizes M10, M12 and M16 for use in
concrete.
Permanent insulating shuttering kit for whole buildings
Partition wall kit for sanitary applications
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in concrete
Torque controlled expansion anchor made of coated
steel of sizes M8, M10 and M12 for use in concrete
Torque-controlled expansion anchor, made of stainless
steel, for use in non cracked concrete: sizes M8, M10,
M12 and M16
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M8, M10, M12 , M16 & M20
Torque controlled expansion anchor, made of stainless
steel, for use in non cracked concrete: size M8
Powder actuated fastener for the fixing of bonded
thermal insulation composite systems in uncoated
concrete
Torque-controlled expansion anchor, made of
galvanised steel, for use in cracked or non cracked
concrete sizes M8, M12 and M16
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M6, M8, M10 and M12
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12, M16, and
M20 for use in non-cracked concrete
Torque controlled expansion anchor, made of
galvanized steel, for use in non cracked concrete: sizes
M6, M8, M10, M12 and M16
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete
Loose fill thermal and/or acoustic material made of
hemp fibres
Torque-controlled expansion anchor made of
galvanised
steel of sizes M8, M10, M12, M16 and M20 for use in
non-cracked concrete
Torque controlled expansion Anchor with internal
thread made of stainless steel of sizes M6, M8, M10
and M 12 for use in concrete
Torque controlled expansion anchor, made of
galvanised steel, for use in non-cracked concrete: sizes
M6, M8, M10, M12 and M16
Torque controlled expansion anchor, made of
galvanised steel, for use in cracked and non-cracked
concrete: sizes M8, M10 and M12
Undercut anchor made of stainless steel 1.459 of sizes
M6, M8, M10, M12 and M16 for use in concrete
PEIKKO HPM/L anchor bolt for the connection of
prefabricated reinforced concrete columns
Bonded anchor made of galvanised steel for use in non
cracked concrete: sizes M8, M10, M12, M16, M20,
M27 and M30
Thermal and/or acoustic insulation board made of
hemp fibres
Thermal and/or acoustic insulation board made of
hemp fibres
Thermal and/or acoustic insulation board made of
hemp fibres
Thermal and/or acoustic insulation board made of
hemp fibres
Impact sound insulation material in form of boards
made of hemp fibres
Impact sound insulation material in form of boards
made of hemp fibres
Thermal and/or acoustic insulation boards, mats made
of hemp fibres
Thermal and/or acoustic insulation boards, mats made
of hemp fibres
Self-cutting undercut anchor, made of stainless steel,
for use in concrete: sizes M10, M12 and M16
Torque controlled expansion anchor with internal
thread made of stainless steel of sizes M6, M8, M10
and M12 for use in concrete
Screwed-in anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry
Screwed-in anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry
Deformation-controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12, M16 and M20
for use in non-cracked concrete
Bonded anchor (injection type) with anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16,
M20, M24 and M30 for use in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M6, M8, M10, M12, M16,
M20, M24 and M30 for use in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel 1,4529 of sizes M6, M8, M10, M12,
M16, M20, M24 and M30 for use in non-cracked
concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M6, M8, M10, M12, M16,
M20, M24 and M30 for use in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel 1,4529 of sizes M6, M8, M10, M12,
M16, M20, M24 and M30 for use in non-cracked
concrete
Light composite wood-based beam and column for
structural purposes
Self-cutting undercut anchor, made of galvanised steel,
for use in concrete: sizes M6, M8, M10 and M12
Self-cutting undercut anchor, made of stainless steel,
for use in concrete: sizes M6, M8, M10 and M12
Torque controlled expansion anchor made of stainless
steel 1,4529/1,4565 of sizes M8, M10, M12 and M16
for use in concrete
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16
for use in concrete
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16
for use in concrete
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete
Deformation-controlled expansion anchor made of
stainless steel of sizes M8, M10, M12, M16 and M20
for use in non-cracked concrete
Thermal and/or acoustic insulation board made of
hemp fibres
Impact sound material in form of boards made of hemp
fibres
Thermal and/or acoustic insulation boards, mats made
of hemp fibres
Torque controlled expansion anchor, made of stainless
steel for use in non cracked concrete: sizes M6, M8,
M10, M12 and M16
Thermal and/or acoustic insulation board made of
hemp fibres
External Thermal Insulation Composite System with
rendering for use as external insulation for building
walls
Bonded anchor made of stainless steel for use in non
cracked concrete: sizes M8, M10, M12, M16, M20,
M24, M27 and M30
Bonded anchor made of high corrosion resistant steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20, M27 and M30
Torque controlled anchor, made of galvanised steel, for
use in concrete: sizes M8, M11, M12, M16, M20 and
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M6, M8, M10, M12, M24
and M30 for use in non cracked concrete
Deformation controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12, M16 and M20
for use in non-cracked concrete
Torque controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M8, M10, M12, M16 and M20
Torque controlled expansion anchor, made of stainless
steel, for use in non cracked concrete: sizes M8, M10,
M12 and M16
Torque controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M8, M10, M12, M16 and M20
Torque controlled expansion anchor, made of stainless
steel, for use in non cracked concrete: sizes M8, M10,
M12 and M16
Lightweight relocatable partition kit
Sealant used in structural and non-structural edge seal
of insulated-glass unit for use in structural sealant
glazing systems
Powder actuated fastener for the fixing of bonded
thermal insulation composite systems in uncoated
concrete
Anchor for fixing of external thermal insulation
composite systems with rendering for use in concrete
and masonry
The insulating dry floor finishing systems with
Fermacell flooring elements are intended for use in
new build and existing (refurbisement) houses and
other buildings for raising the height of floors or
leveling out uneven floors.They can only be used on
structural floors which provide overall support to the
flooring elements. The floor finishing systems are not
intended to be used without a floor covering.
Internal partition kit with large-sized panels of
autoclaved aerated concrete (AAC) (thickness 70 and
100 mm) for use as non-loadbearing walls
Bonded anchor made of galvanized steel for use in non
cracked concrete sizes: M8, M10, M12, M16, M20,
M24 and M30
Bonded anchor made of stainless steel for use in non
cracked concrete sizes: M8, M10, M12, M16, M20,
M24 & M30
External Thermal Insulation Composite System
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16
Polypropylene cavity trays for use as a damp-proof
course in cavity walls with an outer leaf of brickwork,
or in timber-framed constructions, with a masonry
cladding or skin
Log building kit
Timber frame building kit
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in concrete
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in concrete
Nailed-in plastic anchor for fixing of thermal insulation
composite system with rendering in concrete and
masonry
Liquid applied roof waterproofing on the basis of
flexible reactive polymethylmethacylate
Liquid applied roof waterproofing on the basis of
flexible unsaturated polyester
External thermal insulation systems
External thermal insulation systems
External thermal insulation systems
Liquid applied roof waterproofing on the basis of
flexible unsaturated polyester
Liquid applied roof waterproofing on the basis of
flexible unsaturated polyester
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
Nailed in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonsry
Impact sound insulation material in form of boards
made of hemp fibres
Thermal insulation material in form of boards exposed
to compression loads made of hemp shives
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M8x30, M8x40, M10, M12,
M16 and M20 for use in non-cracked concrete
Torque controlled bonded anchor with anchor rod made
of galvanised steel of sizes M10/75, M12/95, M16/105,
M16/125 and M20/170 for use in concrete
Torque controlled bonded anchor with anchor rod made
of stainless steel of sizes M10/75, M12/95, M16/105,
M16/125 and M20/170 for use in concrete
Torque controlled bonded anchor with anchor rod made
of high corrosion resistant steel of sizes M10/75,
M12/95, M16/105, M16/125 and M20/170 for use in
concrete
Thermal and/or acoustic insulation product made of
sheep’s wool “alchimealana Dämmvlies” for building
applications
Post-tensioning kit for prestressing of structures with
unbonded monostrands for concrete
Structural sealant for use in structural sealant glazing
systems
Steel plate with cast-in KÖCO headed studs made of
steel
Steel plate with cast-in KÖCO headed studs made of
steel
Steel plate with cast-in Nelson headed studs made of
steel
Steel plate with cast-in Nelson headed studs made of
stainless steel
Liquid applied roof waterproofing on the basis
polyurethane (one-component)
Liquid applied roof waterproofing on the basis of
polyurethane (two-component)
Structural sealant glazing kit for use in curtain walling
Thermal insulation material in form of boards exposed
to compression loads made of hemp shives
Thermal insulation material in form of boards exposed
to compression loads made of hemp shives
Thermal insulation material in form of boards exposed
to compression loads made of hemp shives
Fibre gypsum boards used for planking and lining of
components
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M8x30, M8x40, M10, M12,
M16 and M20 for use in non-cracked concrete
Liquid applied roof waterproofing using kits based on
polyurethane
Liquid applied roof waterproofing on the basis of an
elasticised solventfree thermosetting plastic with
elatomeric fillers
Liquid Applied Roof Waterproofing Kits based on
water dispersiable polymers (LARWK)
Special anchor for the fixing of façade plates from their
back side made of dust-pressed ceramic plates
(stoneware) according to EN176
Wood-based I-shaped composite beams and columns
for structural purposes
Thermal insulation board made of cellulose & polyester
fibres
External Thermal Insulation Composite System
Liquid applied roof waterproofing on the basis of
polyurethane
Fastening element made of stainless steel
Non-load bearing partition kit for dry and wet rooms
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 & M12 for use
in non-cracked concrete
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
Torque-controlled expansion anchor made of stainless
steel for use in concrete sizes: M8, M10, M12 & M16
Deformation-controlled expansion anchor made of
galvanised steel of sizes M8, M10 and M12 for use in
non-cracked concrete
Light composite wood-based beams and columns for
structural purposes
Annular ringed shank nails and connector
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Liquid applied roof waterproofing on the basis of
flexible reactive polymethylmethacrylate
Liquid Applied Roof waterproofing on the basis of
polyurethane
Liquid Applied Roof waterproofing on the basis on
water dispersible polymers
Light Composite Wood-based Beam
Screwed-in anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry
Liquid Applied roof waterproofing on the basis of
polymer modified bitumen emulsion
Anchor made of galvanised steel for multiple use for
non-structural applications in concrete
Anchor made of galvanised steel of size K6 L for
multiple use for non-structural applications in concrete
Bonded anchor(injection type) with anchor rod or
internal sleeve made of galvanised steel of sizes M8,
M10, M12, M16, M20, M24, M27and M30 for use in
non-cracked concrete
Bonded anchor(injection type) with anchor rod or
internal sleeve made of stainless steel of sizes M8,
M10, M12, M16, M20, M24, M27and M30 for use in
non-cracked concrete
Bonded anchor(injection type) with anchor rod made of
high corrosion resistant steel of sizes M8, M10, M12,
M16, M20, M24, M27and M30 for use in non-cracked
concrete
Nailed -in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry
Torque controlled expansion anchor with internal
thread made of stainless steel 1.4529/1.4547 of sizes
M8, M10, M12 and M16 for use in concrete
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry
External Thermal Insulation Composite Systems with
rendering
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Liquid applied waterproofing on the basis of
polyurethane
Liquid applied roof waterproofing on the basis of
polyurethane
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings
Prefabricated tension rod system
Prefabricated tension rod system
Glued laminated wood-based beams and columns for
structural purposes
Bitumen shingles with cellulose reinforcement
Three-dimensional Nailing plate (Timber to timber
joist hanger)
Anchor made of galvanised steel of size HK L for
multiple use for non-structural applications in concrete
"WESTEC Joint sealing Bands PE" used in plants for
the containment, handling and filling of substances
hazardous to water
Structural sealant glazing system for use in curtain
walling
External Thermal Insulation Compsite System with
rendering for the use as external insulation of building
walls
Boards made of flax fibres for thermal insulation
and/or sound absorption
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Liquid applied composite waterproofing for inverted
roofs on the basis of hot-applied polymer-modified
bitumen and polymerbitumen sheeting for
waterproofing of roofs
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Emergency Escape Door Security Bolt
External Thermal Insulation Composite System
(ETICS) with rendering on mineral wool for the use as
external insulation to the walls of buildings
Liquid applied roof waterproofing using kits based on
polyurethane
Liquid applied roof waterproofing using kits based on
polyurethane
Cast-in steel plate with welde joint Teräspeikko-
Anchor bolts made of steel
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12, and M16 for
use in concrete
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete
Timber frame construction kits for low rising housing
and similar building structures
Torque-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M8, M10, M12, M16 and M20
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings
External Thermal Insulation Composite systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
Hilti powder actuated fasteners ENP2-21L15, ENP2-
21L15MX, ENP2-21L15MXR, ENPH2-21L15,
ENPH2-21L15MX, ENPH2-21L15MXR in
combination with Hilti fastening tools DX 750, DX 750
MX, DX A70 R for fastening of steel sheeting to steel
members
Screwed- in plastic anchor for fixing of external
thermal insulation composite systems with rendering in
concrete and masonry
Liquid Applied Roof waterproofing Kits, based on
Water Despersiable Polymers
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M8, M10, M12, M16, and
M20 for use in non-cracked concrete
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Torque controlled expansion anchor made of stainless
steel 1.4529 or 1.4565 of sizes M8, M10, M12 and
M16 for use in concrete
Torque controlled expansion anchor made of stainless
steel 1.4529 or 1.4565 of sizes M8, M10, M12 and
M16 for use in concrete
Bonded anchor (injection type) with anchor rod made
of galvanised steel sizes M10, M12 and M16 for use in
non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M10, M12 and M16 for use in
non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel 1.4529 of sizes M10, M12 and M16
for use in non-cracked concrete
External thermal insulation Composite System with
rendering for the use as external insulation of building
walls
Nailed-in anchor for fixing of external insulation
composite systems with rendering in concrete and
masonry
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Loose fill thermal insulating material made of hemp
fibres
Insulating material made of loose, free cellulose fibres
In-situ formed loose fill insulation material and/or
acoustic insulation material made of vegetable or
animal fibres
Liquid applied Roof Waterproofing Kit based on
Polyurethane
Post-tensioning kit for prestressing of structures with
unbonded strands for concrete
Torque controlled bonded anchor with anchor rod
made of galvanised steel of sizes M8x55, M10x65,
M12x75, M16x90 for use in concrete
Torque controlled bonded anchor with anchor rod made
of stainless steel of sizes M8x55, M10x65, M12x75,
M16x90 and M20x120 for use in concrete
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite system with
rendering for the use as external insulation of building
walls
External Thermal insulation Composite system with
rendering for the use as external insulation of building
wall
Torque controlled bonded anchor (injection type) with
anchor rod made of galvanised steel of sizes M8, M10,
M12(hef80), M12(hef100), M16, M20 and M24 for use
in concrete
Torque controlled bonded anchor (injection type) with
anchor rod made of stainless steel of sizes M8, M10,
M12(hef80), M12 (hef100), M16, M20 and M24 for
use in concrete
Torque controlled bonded anchor (injection type) with
anchor rod made of stainless steel 1.4529 / 1.4565 of
sizes M8, M10, M12(hef80), M12(hef100) M16, M20
and M24 for use in concrete
Torque controlled bonded anchor (injection type) with
anchor rod made of galvanised steel of sizes M8, M10,
M12(hef80), M12(hef100), M16, M20 and M24 for use
in concrete
Torque controlled bonded anchor (injection type) with
anchor rod made of stainless steel of sizes M8, M10,
M12(hef80), M12(hef100) M16, M20 and M24 for use
in concrete
Torque controlled bonded anchor (injection type) with
anchor rod made of stainless steel 1.4529 / 1.4565 of
sizes M8, M10, M12(hef80), M12(hef100), M16, M20
and M24 for use in concrete
Liquid applied Roof Waterproofing kits, based on
Epoxy Resin
Undercut anchor made of stainless steel of sizes
M10,M12,M16 and M20 for use in concrete
Undercut anchor made of galvanised steel of sizes
M10, M12, M16 and M20 for use in concrete
Torque-controlled expansion anchor made of cinc
yellow passivated steel of sizes M8, M10, M12, M16,
M20 and M24 for use in non cracked concrete only
Hilti powder actuated fasteners X-ENP-19 L15, X-
ENP-19 L 15MX, X-ENP-19 L 15MXR in
combination with Hilti fastening tools DX 76, DX 76
MX, DX 860-ENP, DX 750, DX 750 MX, DX A70 for
fastening of steel sheeting to steel members
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for teh use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Systems of mechanically fastened flexible SBS roof
waterproofing membranes
External thermal Insulation Composite System with
rendering for use as external insulation ob building
walls
Timber Frame building kits for dwelling-houses and
similar structures
Liquid Applied roof waterproofing on the basis of
polyurethane
Liquid applied roof waterproofing on the bass of
polyurethane
Screwed- in plastic anchor for fixing of external
thermal insulation composite systems with rendering in
concrete and masonry
Torque controlled bonded anchor (injection type) with
anchor rod made of galvanised steel of sizes M8, M10,
M12(hef80), M12(hef100)M16, M20 and M24 for use
in concrete
Torque controlled bonded anchor (injection type) with
anchor rode made of stainless steel of sizes M8, M10,
M12(hef80, M12(hef100)M16, M20 and M24 for use
in concrete
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in concrete
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete
Torque controlled expansion anchor with internal
thread made of stainless steel of sizes M6, M8, M10
and M12 for use in concrete
Torque conrtolled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M8x30, M8x40, M10, M12,
M16 and M20 for use in non-cracked concrete
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16
for use in concrete
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
Non-loadbearing Permanent shuttering kit "Euromac 2"
based on shuttering elements of EPS
Nail-in plastic anchor for fixing of external thermal
insulation composite systems with rendering on
concrete and masonry
external Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation of building walls
Structural Sealant for use in structural sealant glazing
systems
Liquid applied roof waterproofing on the basis on
polyurethane polymers
Loose fill thermal insulating material made of sea grass
Nailed -in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry
Concrete screw made of galvanised steel of sizes
MMS-10, MMS-12, MMS-14 and MMS-16 for use in
concrete
Concrete Screw made of stainless steel of sizes MMS-
10 A4 and MMS-12 A4 for use in concrete
Concrete screw made of galvanised steel of sizes dia10,
dia12, dia 14 and dia 16 for use in concrete
Torque controlled self undercutting anchor, made of
stainless steel, for use in cracked or non cracked
concrete: sizes M8, M12 and M16
Thermal and/or acoustic insulation board made of flax
fibres
Hyydraulic binder based on granulated blast furnace
slag for preparation of concrete, mortar and other mixes
for construction and for the manufacturing of
construction products
PROXAN joint sealing compound PK 25 G (pouring
grade) as a component of the PROXAN joint sealing
system used in plants for the containment, handling and
filling of substances hazardous to water
PROXAN joint sealing compound PK 25 ST (gun-
grade) as a component of the PROXAN joint sealing
system used in plants for the containment, handling and
filling of substances hazardous water
Torque controlled expansion anchor made of stainless
steel of sizes M6,M8,M10,M12 and M20 for use in
non-cracked concrete.
Torque cpntrolled expansion anchor made of stainless
steel od sizes M6, M8, M10, M12, M16 and M20 for
use in non-cracked concrete
Torque conrtolled expansion anchor made of stainless
steel of sizes M6, M8, M10, M12, M16 and M20 for
use in non-cracked concrete
Thermal and/or acoustic insulation mat made of sheep
wool
Timber Frema Building Kit
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M10, M12 and M16 for use
ins non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel 1.4529 / 1.4565 of sizes M10, M12
and M16 for use in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M10, M12 and M16 for use in
non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Bonded anchor (injection type) with anchor rod anchor
made of stainless steel of sizes M10, M12 and M16 for
use in non-cracked concrete
Bonded Anchor (injection type) with anchor rod made
of stainless steel 1.4529/1.4565 of sizes M10, M12 and
M16 for use in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Bonded anchor (injection type) with anchor tod anchor
made of stainless steel of sizes M10, M12 and M16 for
use in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel 1.4529/1.4565 of sizes M10, M12 and
M16 for use in non-cracked concrete
Bonded Anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Bonded anchor (injection type) with anchor rod anchor
made of stainless steel of sizes M10, M12 and M16 for
use in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel 1.4529 of sizes M10, M12 and M16
for use in non-cracked concrete
Insulating material made of hemp and polyester fibres
Screwed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry
Internal partition kits for use as non-loadbearing walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Plastic Piping kits for heating systems, made of PE-RT
Type I with an oxygen barrier layer
Insulatin material made of loose free cellulose fibres
Torque-controlled expansion anchor, made of
galvanised steel, for use in cracked and non-cracked
concrete: sizes M6, M8, M10, M12, M16 and M20
Exthernal Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulatin to the walls of buildings
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Non load-bearing permanent shuttering kits based on
panels of insulating materials
Bonded anchor (injection type) with anchor rod or
internal sleeve made og stainless steel of sizes M8,
M10, M20, M24, M27 and M30 for use in non-cracked
concrete
Bonded anchor (injection type) with anchor rod made
of high corrosion resistant steel of sizes M8, M10,
M16, M20, M24, M27 and M30 for use in non-cracked
concrete
Deformation-controlled expansion anchor, made of
galvanised steel, for use in non cracked concrete: sizes
M6, M8, M10, M12 and M16
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings
Plastic nailed - in anchors for fixing of external thermal
insulation composite systems with rendering in
concrete and masonry
Liquied applied roof waterproofing kit based on
polyurethane
Underlay for discontinuous roofing
Iprenated joint sealing tape made of foamed
polyurethane for sealing joints around windows and in
facades
External thermal Insulation Composite system with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite Systems with
Rendering
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Torque Controlled expansion Anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M16
for use in concrete
Strucutral Sealant for use in insulating glass units
Torque controlled expansiona nchor made of
galvanized steel of sizes M8, M10, M12 and M16 for
use in concrete
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12 and M20
for use in non-cracked concrete
Bonded anchor (injection type) with anchor rode made
of stainless steel 1.4529/1.4565 of sizes M10, M12 and
M16 for use in non-cracked concrete
RODAN point fastener
Fastening element made of stainless steel
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Bonded Anchor (injection type) with anchor rod made
of stainless steel of sizes M10, M12 and M16 for use in
non-cracked concrete
Zinc-plated steel torque-controlled expansion anchor in
sizes of M8, M10, M12, M16 and M20, for use in non-
cracked concrete
External Thermal Insulation Composite System with
rendering for teh use as external insulation of building
walls
Nailed-in plastic anchor for fixing of external thermal
insulation composite systems with rendering in
masonry
Prefabricated stair with solid wood steps and a load-
bearing handrail made of solid wood
Joint sealing compound "BIGUMA - KV 3 PG
(pouring grade) as a component of the joint sealing
system by Dortmunder Gussasphalt GmbH & Co KG
used in plants for the containment, handling and filling
of substances hazardous to water
Joint Sealing Compound "BIGUMA - KV 3 GG (gun
grade) as a component of the joint sealing system
Dortmunder Gussasphalt GmbH & Co KG used in
plants for the containment, handling an filling of
substances hazardous to water
Bondeed anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Liquid applied roof waterproofing kits, based on
polymer modified Bitumen Emulsions
Timber Frame Construction kits for low-rise housing
and similar building structures
Thermal and or acoustic insulation mat made of sheep
wool
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M10, M12 and M16 for use in
non)cracked concrete
Bonded anchor (injection type) with anchor rode made
of galvanised steel of sizes M10,M12 and M16 for use
in non-cracked concrete
Non-loadbearing pemanant shuttering kits "Durisol",
"HARML", "ISOSPAN" and "THERMOSPAN" based
on hollow blocks of wood-chips aggregate concrete
External Thermal Insulation Composite System with
rendering for the use as external insulation to the walls
of buildings.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
Thermal insulating board made of mineral material
Nailed in plastic anchor for fixing of external thermal
insulation composite systems with renering on concrete
and masonry
Type II adition for production of concrete including in
particular cast-in-situ or prefabricated structural
concrete confirming to European standard EN 206-1.
Fly ash acording to this ETA may also be used in
mortars and grouts.
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
Liquid Applied Roof Waterproofing Kits, based on
water Dispersiable Polymers
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Bonded anchor made of galvanised steel for use in non
cracked concrete: sizes M8, M10, M12, M16, M20 and
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 & M24
Bonded injection type Anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes: M8, M10, M12,
M16, M20 and M24
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24
Bonded injection type anchor made of stainless steel
for use in non cracked , conete: sizes M8, M10, M12,
M16, M20 and M24
Bonded anchor made of galvanised steel for use in non
cracked concrete: size M8, M10, M12, M16, M20 and
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20, M24
Bonded anchor made of galvanised steel for use in non
cracked concrete: sizes M8, M10, M12, M16, M20 and
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20 and M24
Bonded injection type anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16 and M20
Bonded injection typ anchor made of galvanised steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20, M24 and M30
Bonded injection type anchor made of stainless steel
for use in non cracked concrete: sizes M8, M10, M12,
M16, M20, M24 and M30
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of building
walls
Deformation -controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
use in non-structural applications in concrete
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete
Plastic piping kits for heating systems, made of PE-RT
Type I with an oxygen barrier layer
Log Building Kit
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete
Wedge-Anchor
Bonded and unbonded ba Post -tensioning kit for
prestressing of structures
Bonded and unbonded bar^post-tensioning kit for
prestressing of structures
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M16 and M20
for use in non-cracked concrete
Liquid applied roof waterproofing on the basis of
polyurthane
Liquied applied Roof Waterproofing Kit, base on
Polyyrethane
Door threshold with build-in draining system for
draining off of water.
Liquid applied roof waterproofing on the basis of
polyurethane
External Thermal Insulation Composite System with
rendering for teh use as external insulation of building
walls
Bonded anchor (injection type)with anchor rod made of
galvanised steel of sizes M10, M12 and M16 for use in
no-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M10, M12 and M16 for use in
non-cracked concrete
Bonded anchor (injection type) with anchor made of
galvanised steel 1.4529/1.4565 of sizes M10, M12 and
M16 for use in non-cracked concrete
Bonded anchor (injection type) with anchor rod of
galvanised steel of sizes M10,M12 and M16 for use in
non cracked conccrete
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M10, M12 and M16 for use in
non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel 1.4529/1.4565 of sizes M10, M12 and
M16 for use in non- cracked concrete
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete
Deforamtion-controlled expansion anchor made of
stainless steel of sizes M6, M8x30, M8x40, M10, M12,
M16 and M20 for use in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Bonded anchor (injection type) with anchor rod ùade of
galvanised steel of sizes M10, M12 and M16 for use in
non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Bonded anchor (injection type) with anchor rode made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M10, M12 and M16 for use in
non-cracekd concrete
Bonded Anchor (injection type with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Nailed -in plastic anchor for fixing of external thermal
insulation composite systems with rendering on
concrete and hollow masonry
Nailed-in plastic Anchor for fixing of external thermal
insulation composite systems with rendering on
concrete and hollow masonry
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Liquid applied roof waterproofing on the basis on
polyurethane polymers
Liquid Applied roof waterproofing, using kits based on
hot-applied polymer-modified bitumen
Exterman Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to teh walls of buildings
External Thermal Insulation Composite Systems with
rendering on polystyrene for the use as external
insulation to the walls of buildings
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering on mineral wool for teh use as external
insulation of building walls (ETICS)
Deformation-controlled expansion anchor made of
Stainless steel of sizes M6, M8x30, M8x40, M10, M12
M16 and M20 for use in non-cracked concrete
Torque controlled expansion anchor made of stainless
steel of sizes M8, M10, M12 and M16 for use in
concrete
Torque controlled expansion anchor made of
galvansied steel of sizes M8, M10, M12 and M16 for
use in concrete
Deformation-controlled anchor made of galvanised
steel of sizes M6, M8, 10, M12, M16 and M20 for use
in non-cracked concrete
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete
Torque controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10, M12, M16 and
M20 for use in non-cracked concrete
Torque controlled expansion anchor made of stainless
steel of sizes M6, M8, M10, M12, M16 and M20 for
use in non-cracked concrete
Torque controlled bonded anchor with anchor rod made
of galvansied steel of sizes M8, M10, M12, M16 M20
and M24 for use in concrete.
Torque controlled bonded anchor with anchor rod made
of stainless steel of sizes M8, M10, M12, M16, M20
and M24 for use in concrete
Torque controlled bonded anchor with anchor rod made
of stainless steel 1.4529 of sizes M8, M10, M12, M16,
M20 and M24 for use in concrete
Deforamtion-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete
Type II aadition for production of concrete, including
in particular cast-in-situ or prefabricated structural
concrete conforming to European Standard EN 206-1.
Fly Ash according to this ETA may also be used in
mortars and grouts.
Torque controlled expansion anchor made of
galvanised steel for use in non-cracked concrete: sizes
M6, M8, M10 and M12.
Non load bearing shuttering kit "ARGISOL" based on
shuttering elements of EPS
External Thermal Insulation Composite Systems with
renderings for the use as external insulation to the walls
of buildings
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls.
External Thermal Insulation Composite Systems with
rendering on mineral wool for the use as external
insulation to the walls of buildings
Bonded Anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M10,M12 and M16 for use in
non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of stainless steel of sizes M10,M12 and M16 for use in
non-cracked concrete
External Therma Insulation Composite Systeùm with
rendering for the use as external insulation of building
walls
Thermal Insulating board made of mineral material
Deformation-controlled expansion anchor made of
stainless steel of sizes M6, M 8x30, M 8x40, M10,
M12 M16 and M20 for use in non-cracked concrete
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10,M16 and M20
for use in non-cracked concrete
Bonded injection type anchor made of galvanised steel
for use in noncracked concrete: sizes M8, M10, M12,
M16, M20 and M24
Bonded injection type anchor made of stainless steel
for use in non-cracked concrete: sizes M8, M10, M12,
M16, M20 and M24
Torque controlled expansion anchor, made of zinc
electroplated steel for use in non cracked concrete
sizes M8, M10, M12, M16 and M20
Insulation Material made of loose, free cellulose fibres
Cellular glass loos fill for use as thermal and frost
insulating layer, water capillary barrier, drainage, and
light fill in building foundations and road construction
applications
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings
Log Building Kit
Log Building Kit
Insulating material made of loose, free cellulose fibres
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
wall
Liquied Applied roof waterproofing on the basis of
polyurethane
Special anchor for the fixing of facade plates from their
back side made of dust-pressed ceramic plates
(stoneware) "Granito Ceramico" according to EN
14411
Bonded anchor injection type with anchor rod made of
galvanised steel of sizes M10, M12 and M16 for use in
non-cracked concrete
Structural Sealant for use in structural sealant glazing
kit
External Thermal Insulation Composite system with
rendering for use as external insulation of building
walls
External Thermal Insulation Composite system with
rendering for use as external insulation of building
walls
Liquid applied roof waterproofing on the basis of
flexible reactive polymethymetacrylate
External Thermal Insulation Composite Systems
(ETICS)
Prefabricated Tension Rod System
Liquied applied roof waterproofing on the basis of
flexible reactive polymethylmethacrylate
Liquid applied roof waterproofing on the basis of
flexible unsaturated polyester
Timber Units for walls, ceilings and roofs
Natural Calcined puzzolana as type II addition
System of mechanically fastened flexible roof
waterproofing membranes
Bonded Anchor with anchor rod made of galvanised
steel of sizes M10, M12, M16, M20 and M24 for use in
non-cracked concrete
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete.
Bonded anchor with anchorrod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete
Bonded anchor with anchor rod made of galvanized
steel of sizes M10, M12 and M16 for use in non-
cracked concrete
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Bonded anchor (injection type) with anchor rod made
of galvanised steel of sizes M10, M12 and M16 for use
in non-cracked concrete
Nailed-in plastic anchors for fixing of external thermal
insulation composite systems with rendering in
concreteand masonry
Insulating material made of lose, free cellulose fibres
ALSAN 310
Bonded Anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in non-
cracked concrete
Bonded anchor with anchor rod made of stainless steel
1.4529 of sizes M10, M12, M16, M20 and M24 for use
in non-cracked concrete
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12, M16, M20 and M24 for use in
non-cracked concrete
Bonded anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in non-
cracked concrete
Zinc plated steel torque-controlled expansion anchor in
sizes of M8, M10, M12, M16 and M20 for use in non-
cracked concrete
Liquid applied roofwaterproofing on the basis of
polymethylmethacrylate
Liquid applied roof waterproofing on the basis of
polymethylmethacrylate
Trade name 1
weber.therm-WDVS B 200 Flex
Trade name 2
terratherm-WDVS B 200
Flex (mit EPS)
Log Building Kit
External Thermal Insulation Composite System with
rendering for the use as external insulaiton of building
walls
External thermmal Insulation Composite system with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite systems with
rendering for the use as external insulation of building
walls
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete
Torque-con,trolled expansion anchor, made of zinc
electroplated steel, for use in non cracked concrete;
sizes M8, M10, M12, M16 and M20
Arcutherm -WDV System Polystyrol
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation ob building
walls
Bonded anchor < non-cracked in use for steel stainless
of made M16 and M12 M10, sizes rod anchor>
Bonded anchor with anchor rod of sizes M10,M12 and
M16 made of galvanised steel for use in non-cracked
concrete
Bonded anchor with anchor rod of sizes M10, M12 and
M16 made of stainless steel 1.4529/1.4565 for use in
non-cracked concrete
Bonded anchor with anchor rod or internal sleeve made
of stainless steel of sizes M8, M10, M12, M16, M20,
M24, M27 and M30 for use in non cracked concrete
Joint sealing Compound "Masterflex 700 FR (TK 63
G) pouring grade as a component of the joint sealing
system of the degussa Bautechnik GmbH used in plants
for the containment, handling and filling of substances
hazardous to water
Joint sealing ccompound "Masterflex 700 FR (TK 63
S) gun grade as a component of the joint sealing system
of teh Degussa Bautechnik GmbH used in plants for the
containment, handling and filling of substances
hazardous to water
Non-loadbearing permanent shuttering kits
"DURISOL", "HARML", "ISOSPAN" and
"THERMOSPAN" based on hollow blocks of wood-
chips aggregate concrete
Non-Loadbearing permanent shuttering kits
"DURISOL","HARML", "ISOSPAN" and
"THERMOSPAN" based on hollow blocks of wood
chips aggregate concrete
"DURISOL", "HARML","ISOSPAN", and
"THERMOSPAN", based on hollow blocks of wood-
chips aggregate concrete
Liquid applied roof waterproofing on the basis of
polyurethane
Liquid applied roof waterproofing on the basis of
polyurethane
Liquid applied roof waterproofing on the basis of
polyurethane
special anchor for the rear fixing of facade panels made
of selected natural stones according to EN 1469
Nailed in plastic anchor for fixing of exteranl internal
insulation composite systems with rendering in
concrete and masonry
Internal Partition Kit fo use as non-loadbearing walls
Torque controlled expansion anchor made of
galvanised steel of sizes M8, M10, M12 and M16 for
use in concrete
External thermal insulation composite system with
rendering on polystyrene for the use as external
insulation to the walls of buildings
External Thermal insulation Composite system with
rendering on polystyrene for the use as external
insulaiton to the walls of buildings
External Thermal Insulation Composite Systems with
rendering for the use as external insulation of
Fasteners for mechanically fastened flexible roof
waterproofing systems
Intenal Partitions Kit for use as non-loadbearing walls
Systems of mechanically fastened SBS modified
bitumen flexible roof waterproofing membranes
Multilayer-systems of mechanically fastened flexible
SBS bitumen modified roof waterproofing membranes
External Thermal Insulation Composite systems with
rendering for the use as external insulation of building
wall
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering on mineral wool for the use as external
insulation of building walls (ETICS)
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation of building walls (ETICS)
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings
Thermal Insulation material in form of boards exposed
to compression loads made of hemp shives
Thermal and/or acoustic insulation board, mats made of
hemp fibres
Thermal and/or acoustic insulation board made of
hemp fibres
Trade name 1
STEICO canaflex H
Trade name 2
FLORAPAN Fassade
Trade name 3
Isover Kontur FSP6 FLORPAN
Fassaden – Dämmplatte
Trade name 1
STEICO canafloor
Trade name 2
FLORAPAN Floor
Trade name 3
Isover Integra UKP 2
FLORAPAN Untersparren - Klemmplatte
Trade name 4
Isover Integra EP6 FLORAPAN
Estrich – Dämmplatte
PLASTIKOL TKS2 as a component of the joint sealing
system of the maxit Deutschland GmbH, Mark
Deitermann used in plants for the containment,
handling and filling of substances hazardous to water
PLASTIKOL TKS as a component of the joint sealing
system of the maxit Deutschland GmbH, marke
Deitermann use in plnts for the containment, handling
anf filling of substances hazardous to water
Internal Partition Kit for use as non-loadbearing walls
Deformation-controlled expansion anchor made of
galvanised steel of sizes M6, M8, M10 and M12 for
multiple use for non-structural applications in concrete
Deformation controlled expansion anchor made of
stainless steel of sizes M8x30, M10x40 and M12x50
for multiple use for non-stuctural applications in
concrete
Plastic piping kits for heating systems, made od PE-RT
Type I with an oxygen barrier layer
Systems of mechanically fastened SBSmodified
bitumen flexible roof waterproofing membranes
Systems of mechnically fastened SBS modified
bitumen flexible roof waterproofing membranes
Systems of mechnically fastened SBS modified
bitumen flexible roof waterproofing membranes
Multi-Layer systems of mechanically fastened flexible
SBS bitumen modified roof waterproofing memebranes
Multi-Layer system of mechanically fastened flexible
SBS bitumen modified roof waterproofing membranes
Multi-layer systems of mechanically fastened flexible
SBS bitumen modified roof waterproofing membranes
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete
Bonded anchor with anchor made of galvanised steel of
sizes M10, M12 and M16 for use in non-cracked
concrete
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete
Liquid Applied roof waterproofing on the basis of
polyurethane
Bonded anchor with anchor rod made of galvanised
steel of sizes M10,M12,M16,M20 and M24 for use in
non-cracked concrete
Bonded anchor with anchor rod made of stainless steel
of sizes M10,M12,M16,M20 and M24 for use in non-
cracked concrete
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings
Concrete screw made of galvanised steel of sizes
MMS-10, MMS-12, MMS14 and MMS-16 for use in
concrete
Concrete screw made of stainless steel of sizes MMs-
10and MMs-12 for use in concrete
Bonded anchor sith anchor rod made of galvansied
steel of sizes M10, M12, M16, M20 and M24 for use in
non-cracked concrete
Bonded Anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in no-
cracked concrete
Bonded anchor with anchor rod made of stainless steel
1.4529 of sizes M10, M12, M16, M20 and M24 for use
in non-cracked concrete
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete
Bonded anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in non-
cracked concrete
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete
Bonded anchor with anchor rod made of stainless steel
of sizes M10, M12, M16, M20 and M24 for use in non-
cracked concrete
Homogenous building board for internal lining
Three-dimensional nailing plate (timber-to timber angle
bracket)
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Bonded anchor with anchor rod of sizes M10, M12 and
M16 made of galvanised steel for use in non-cracked
concrete
External Thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings
External thermal Insulation Composite System with
rendering on polystyrene for the use as external
insulation to the walls of buildings
External Thermal Insulation Composite system with
rendering on polystyren for the use as external
insulation to the walls of buildings
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
renderings for the use as external insulation to the walls
of buildings
Torque controlled expansion anchor made of stainless
steel of sizes M6, M8, M10, M12 and M16 for use in
non-cracked concrete
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Torque controlled expandion anchor made od stainless
steel 1.4529/1.4565 of sizes 30 M6 and 40 M6 for
multiple use for non-structrual applications in concrete
Torque-controlled expansion anchor made of stainless
steel of sizes 30M6 and 40 M6 for multiple use for
non-structural applications in concrete
Single layer mechanically fastened roof-waterproofing
kit
Double layer mechanically fastened roof-waterproofing
kit
Bonded anchor with anchor rod made of galvanised
steel of sizes M10, M12 and M16 for use in non-
cracked concrete
External thermal Insulaiton composite system with
rendering for the use as external insulation of building
walls
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
wall
External Thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
Torque controlled expansion anchor, made of
galvanized steel for use in non-cracke concrete; sizes
M6, M8, M10, M12 and M16
External thermal Insulation Composite System with
rendering for the use as external insulation of building
walls
ETAs without European Technical Approval Guidelines as per Article 11 of the
In product areas where no ETAG exists, ETAs can be awarded, subject to the
agreement of all EOTA bodies and the European Commission, through what is known
as the Common Understanding of Assessment Procedure (CUAP), in which the
assessment criteria for the product and its intended use are set out.
Full details of this arrangement are given in EOTA’s Common Procedural Rules for
Requesting, Preparing and the Granting of European Technical Approvals, in
particular in sub-sections 3.2.3 and 3.2.4. The procedure is also called up in the CPD
(Article 9.2)
For the time being the EC has authorised EOTA to issue ETAs according to this
procedure of Article 9.2 for the following product area(s)
Subjects
1. Permanent insulating shuttering system
2. Internal insulating floor finishing system
Construction products made of animal fibres for acoustic and thermal insulation
Construction products made of vegetable fibres for acoustic and thermal
insulation
•
Amendment (version bis)
•
Amendment regrouping previous versions (version tris)
•
cluster 1 Factory-made thermal insulation material and/or acoustic
insulation material made of vegetable or animal fibres
•
cluster 1 Rev1 Factory-made thermal insulation material and/or acoustic
insulation material made of vegetable or animal fibres
•
cluster 2 In-situ formed loose fill thermal insulation material and/or
acoustic insulation material made of vegetable or animal fibres
•
Thermal insulation material and/or acoustic insulation material made of
hemp fibres to be used under floating floors
Kit for traffic noise reducing devices (using hollow blocks of cement bonded
wood chips as permanent shuttering system)
Prefabricated compressed mineral wool boards with two layers of acrylic paints
(on the external side of the product)
Lightweight sound absorbent baffle made of wood fibres (laminated particle
board, for interior walls)
Sound absorbing elements for internal use, made of melamine resin foam with
variable surface structure, used with or without coating
Vibration and impact noise isolation with floating floor systems. Surface mats
and discrete (pads) resilient isolators as element of floating floor systems
Bitumen on coated polystyrene granules as a dry mix for impact sound
insulation
Large-sized fibre gypsum panels used for walls of prefabricated houses
Channel bars (cast-in steel channel bars)
Vibration and noise isolation with elastically fixed wall panels (elastomeric or
composite-elastomeric materials placed between supported wall element and the
structural element of the building)
Chemical anchoring kit, consisting of a polymer resin and an activator
contained separately within a single cartridge. Complete mixing when extruded
Special anchors (bolt and eccentric sleeve of stainless steel)
Wall plates made of stainless steel
Kit consisting of a trap with partially mechanical closure, mounted in a non-
trapped gully
17.1. Kit consisting of a trap with partially mechanical closure, mounted in a non-
trapped gully – Rev 1
Rice husks in bulk
Rubber-based expansion anchor
19.1. Rubber-based expansion anchor – Rev 1
Cast-in anchor bolt
Steel plate with cast-in anchor(s)
Kit of epoxy concrete / glassfibre-reinforced polyester anchors / epoxy mortar
Powder actuated fastener for the fixing of insulation material
Connection and protection devices for load-bearing pre-cast concrete piles (two
products: pile joint and rock shoe)
Solid wood slab element (bridges)
Punching preventer for concrete slabs
Solid wood slab element (buildings)
Roof insulation supporting waterproofing systems
Cellulose-reinforced bitumen shingles
Stud rails and double head studs for increasing the punching capacity of flat
slabs on columns
Homogenous building board for external cladding
Composite structural floor system
Internal covering system of gypsum fibre boards
Homogenous building board for internal lining
Gypsum bonded particleboard
Cavity trays
Couplings for standardised reinforcing bars
Pressboard façade claddings
Modular building panels
Fastener of external wall claddings
Microprismatic retro-reflective sheetings
Building kit made of special components of wood-based materials
Column shoes
Connector for Sandwich elements of concrete
Kit for manhole top consisting of Cover and additional rings made of plastic
for different purposes
Balcony glazing system without vertical frames
Composite roof waterproofing kit
Mechanical fastening system for fixation of thermal insulation in flat or pitched
roofs made of steel
Gas and watertight seals for pipes in the area of wall and floor penetrations
Ceiling/flooring elements made of wooden boards or laths, glued on the flat
side.
Sealing kits, profiles and strips usually made of foamed polyurethane, plastic
impregnated bitumen or butly
Joints sealing compounds and profiles
Roof systems: large metal shells with or without thermal insulation
Chemical waste drainage system
3D Construction Kit
Steel truss for roofs
Prefabricated roller shutter box
Vibration and noise isolation with elastically suspended ceilings
Anchor for External Thermal Insulation Composite Systems (ETICS)
Tension Rod System
Ventilation opening device with acoustic damping
Wood shavings in bulk to be used for thermal insulation
Kit for injection piles (composite steel/concrete piles) with a structural member
of defined steel, dia 63.5 mm
Elastomeric bearings for the building sector of type “b”: Profiled elastomeric
bearing
Sliding bearing
Admixture for concrete recycling “Delvo Stop 10G”
Admixture “Delvo stop 10 G” for washing water
Rapid setting cement A, B and C
Rapid setting cement
Timber units for walls and roofs
Single point supported vertical glazing
Point fastener
Surface water repellent product, hydrofobic agents based on organo-metallic
substances
Coating system eliminating electrostatic charges for facilities used for storage,
filling and handling of water endangering liquids
Coating system to be used for facilities used for storage, filling and handling of
water endangering liquids
Fire resistant glazed kits
Wood fibre insulation as boards sprayed in situ
Thermal insulating board made of mineral material
Kit for pipe system consisting of outer pipe made of concrete, unreinforced or
reinforced and inliner made of unplasticized polyvinylchloride (PVC – U) which
are fixed together and fittings of the same materials
Light composite wood based beam
Lightweight framing elements for non-ventilated sheet metal façades
External thermal insulation system based on cement-free adhesive mortar and
base coat
Fire screen (A barrier to prevent the spread of fire, smoke and sparks in
ventilation ducts)
Fabric connecting joints
Level-crossing systems (types A1, A2 and B)
Plastic piping kits for the transport system of cold and hot water intended for
human consumption, made of PE-RT with or without barrier layer
Double-wall cylindrical flat-bottom tank made of GRP
Spherical, double-walled tank of polymer concrete faced with GRP
Single-wall cylindrical flat-bottom tank of GRP
Concrete screw for anchorage in normal-weight concrete
Cartridge fired pin for connections for thin gauge steel members and sheeting
Steelwork connector
Buried glass reinforced filament wound (GRE) piping systems for the transport
under pressure of water intended for human consumption
Buried glass reinforced filament wound (GRE) piping systems for the transport
under pressure of water intended for human consumption in polluted soils
Buried glass reinforced filament wound (GRE) piping systems for the transport
under pressure of water not intended for human consumption
Buried glass reinforced filament wound (GRE) piping systems for drainage and
sewerage with or without pressure
Plastic piping kits for heating systems, made of PE-RT with an oxygen barrier
layer
Piping made from thermoplastic materials, for the transport of chilled water
Factory cellulose glass loose fill
Piles made of ductile iron
Thermal insulation kit for roofs intended to be assembled in situ
Vibration isolation of buildings with elastomeric bearing
Roofing underlay
Binder in concrete and mortar
Door threshold with build-in draining system for draining off of water
Hydraulic binder (slag and additives)
Specialised glued laminated wood beam
Annular ringed shank nails and connector screws
Fly ash for concrete
109.1. Fly ash for concrete
Panels for acoustic and thermal insulation
Pipe penetration seal using an intumescent mat
Damper for damping vibrations, mainly in buildings
Glass concrete composite system (gccs)
Structural Sealant Glazing System
Invisible Concealed Hinges
Emergency Escape Bolt operated by a pull handle & frangible component
Polyurethane-bound mats made of mineral material to be used for impact
sound insulation
Cement-bonded board
Metal Anchor for use in autoclaved aerated concrete
Levelling fastener system for roofs, walls and interior applications with sub-
constructions made out of concrete
Levelling fastener system for roofs, walls and interior applications with
wooden sub- constructions
Vehicle and rail load-bearing bodies made of reinforced concrete to seal
areas, suitable as installation for discharging water-contaminating liquids over
sloping to use in construction works to deal with water-contaminating substances.
Sealing system made of asphalt to seal areas, suitable as installation for
discharging water-contaminating liquids over sloping to use in construction works
to deal with water-contaminating substances.
Restoration system for sett paving areas
Joint sealing system glued on concrete
Surfacing material for a layer impervious to water contaminating substances
Kit of waterproofing polymeric membrane and other components for creating
a waterproofing system against action of water on walls and floors of buildings
under indoor and outdoor conditions
Kit of a Elastomer/Bitumen composite sheet and other components for
creating a roof and construction waterproofing system
Kit of liquid applied polymer modified mineral sealing mass and other
components in contact with tile coverings for creating a waterproofing system
against action of water on different parts of constructions under indoor and outdoor
conditions
Polypropylene foam insulating boards
Intumescent, flexible fire stopping fire sealing product based on graphite
(reactive material)
Adhesive tape for structural glazing application
Natural calcined pozzolana as type II addition
Kit for pre-insulated aluminium ducts
Ceramic coating for thermal insulation
Translucent external wall insulation made of prefabricated façade panels
Kit for soil nails
Kit for rock and soil anchors
Spherical bearing with special sliding material
Floor covering on the basis of polyurethane
Thin reflective insulation product intended to be used as thermal insulation
complement in the construction envelope
Spray-applied mineral wool
143. Dry Plate
Pipe liner for renovation of underground non-pressure sewerage networks
with nominal pipe diameters from 100 mm to 1200 mm to be incorporated with a
special procedure
Steel beams with special joining technology
Elastomeric bearings for the building sector. Specific title of the products
applied for
Type “a”: Elastomeric bearing of higher hardness
Road Marking products
A kit consisting of a thermal insulation board, fabricated from expanded
polystyrene (EPS) and a defined facing to be used for accessible flat roofs for
pedestrian traffic applied in a roofing system
Finishing board, kit with patended click mechanism
Plastic sheets for sealing of collecting basins and collecting rooms for the
storage of water-contaminating liquids (liquids hazardous to water)
Fire seals, smoke seals and combined fire and smoke seals for fire resisting
and/or smoke control door assemblies
Unplasticized poly (vinyl chloride) (PVC-U) piping system for domestic
waste water discharge inside the building to a maximum discharge temperature of
75°C
Sheets of factory-made machine-welded fabric for cracking control in
concrete elements
Soft foam insulation
Flexible coupling for gravity and pressure (below 1.5 bars) sewerage and
drainage pipe
Quenched and tempered wire for prestressing, ribbed and plane
Plastic steps for underground man entry chambers
Double wall static tanks made from rotating moulded polyethylene for above
ground storage of domestic heating oils and diesel fuels
Precast conrete products – Beams made of prestressed steel fibre concrete
HRC T-headed reinforcement steel bar
Special cement CEM III/A with high sulphate resistance
Glass-crystallic Cladding plates
Self-Adhesive Glass mesh Tape
Highly densified EPS as a load bearing and thermal insulating element
Insulation product made of expanded perlite (EPB)
Composite cement (clinker, blast furnace slag, natural puzzolana) class 32,5
N-LH with high sulphate resistance
Wood & Metal composite lighting columns
Sauna Stove fired by wood
Polyestyer fibre thermal & Acoustic insulation
Timber Frame Kit
Kit composed by sub frame and fixings for fastening cladding elements and
also external wall elements, made of stone and ceramics
A packaged small domestic waste water treatment plant for up to 50 PT, made
of rotationally moulded PE for use underground and subjected to traffic loads
Composition toilet
With bricks coated external insulation system
Boards made of natural agglomerated cork for thermal and acoustic insulation
Bitumen shingles with mineral or synthetic reinforcement
Laminated bitumen shingles with mineral or synthetic reinforcement
Fiberboard for wall and roof constructions, vapour open
Floor panel with a polyurethane surface
Profiled steel sheeting for floor systems in combination with a ribbed
reinforced concrete slab
Punched metal plate fasteners
Welded gabion products
Pool Safety Cover
Prefabricated cable pits in reinforce concrete
Prefabricated cable pits made of polystyrene (ps) recycled
Calcium carbonate fines as additions for concrete with binding properties
similar to additions type II
Masonry Spacer Mat
Roof insulation supporting roofing tiles
One component bitumen-polyurethane resin for flashing application applied
directly to bitumen waterproofing membrane used in the horizontal part of the roof
Remedial damp-proof course
Powered pedestrian door drives and systems
Sandwich boards composed by three layers, respectively of agglomerated
cork, coconut fibres and fibreboard MDF
Agglomerated cork and grain recycled rubber with polyurethane binder
Agglomerated cork with polyurethane binder
Mortar with insulating components for floor decks
Cast-in anchor with internal threaded socket
Fastening screw for metal sheet roof covering
Fabricated fittings manufactured by heat moulding (thermo moulding) from
an extruded unplasticized polu(vinyl chloride) (PVC-U) pipe with an intermediate
layer of PVC-U foam, to be used with PVC-U pipes for non-pressure drainage or
sewerage buried in the ground
Swivel joints manufactured by heat moulding (thermo moulding) from an
extruded unplasticized poly(vinyl chloride) (PVC-U) pipe, with a free angle of
deflection to a maximum of 30° to increase the flexibility of fittings, such as
brands, couplers and saddles, in buried non-pressure and sewage applications
Copper plumbing tube with polyethylene covering for sanitary and heating
applications
Kit for closure system for conveyors systems
Insulation material made of granulated polystyrene and compound
Adds Schedule IV to the
Immediately after Schedule III to the principal regulations, there shall be
3. principal regulations.
added the following new schedule
“Schedule IV
LIST OF HARMONISED STANDARDS
Harmonised standards of construction products for which CE marking is
mandatory
EN 40-5:2002 as implemented nationally by MSA EN 40-5:2000
Lighting columns - Part 5: Requirements for steel lighting columns
EN 40-6:2002 as implemented nationally by MSA EN 40-6:2002
Lighting columns - Part 6: Requirements for aluminium lighting columns
EN 40-7:2002 as implemented nationally by MSA EN 40-7:2003
Lighting columns - Part 7: Requirements for fibre reinforced polymer composite
lighting columns
EN 54-3:2001/A1:2002 as implemented nationally by MSA EN 54-
3:2001/A1:2002
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
EN 54-5:2000/A1:2002 as implemented nationally by MSA EN 54-
5:2000/A1:2002
Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors
EN 54-7:2000/A1:2002 as implemented nationally by MSA EN 54-
7:2000/A1:2002
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using
scattered light, transmitted light or ionization
EN 54-12:2002 as implemented nationally by MSA EN 54-12:2003
Fire detection and fire alarm systems – Part 12: Smoke detectors – Line detectors
using an optical light beam
EN 179:1997/A1:2001/AC:2002 as implemented nationally by MSA EN
179:2000/A1:2002/AC:2002
Building hardware-Emergency exit devices operated by a lever handle or push pad-
Requirements and test methods
EN 197-1:2000/A1:2004 as implemented nationally by MSA EN 197-1:2000
Cement-Part 1: Composition, specifications and conformity criteria for common
cements
EN 197-4:2004 as implemented nationally by MSA EN 197-4:2004
Cement – Part 4: Composition, specifications and conformity criteria for low early
strength blastfurnace cements
EN 413-1:2004 as implemented nationally by MSA EN 413-1:2004
Masonry cement – Part 1: Composition, specifications and conformity criteria
EN 442-1:1995/A1:2003 as implemented nationally by MSA EN 442-
1:2000/A1:2003
Radiators and convectors – Part 1: Technical specifications and requirements
EN 459-1:2001 as implemented nationally by MSA EN 459-1:2002
Building lime-Part 1: Definitions, specifications and conformity criteria
EN 523:2003 as implemented nationally by MSA EN 523:2003
Steel strip sheaths for prestressing tendons – Terminology, requirements, quality
control
EN 588-2:2001 as implemented nationally by MSA EN 588-2:2002
Fibre cement pipes for drains and sewers-Part 2: Manholes and inspection chambers
EN 671-1:2001 as implemented nationally by MSA EN 671-1:2001
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
EN 671-2:2001 as implemented nationally by MSA EN 671-2:2001
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
EN 681-1:1996/A1:1998/A2:2002 as implemented nationally by MSA EN 681-
1:2000A1:1998/A2:2002
Elastomeric seals - Material requirements for pipe joint seal used in water and
drainage applications - Part 1 : Vulcanized rubber
EN 681-2:2000/A1:2002 as implemented nationally by MSA EN 681-
2:2000/A1:2002
Elastomeric seals - Material requirements for pipe joint seals used in water and
drainage applications - Part 2: Thermoplastic elastomers
EN 681-3:2000/A1:2002 as implemented nationally by MSA EN 681-
3:2000/A1:2002
Elastomeric seals - Material requirements for joint seals used in water and drainage
applications - Part 3: Cellular materials of vulcanized rubber
EN 681-4:2000/A1:2002 as implemented nationally by MSA EN 681-
4:2000/A1:2002
Elastomeric seals - Material requirements for pipe joint seals used in water and
drainage applications - Part 4: Cast polyurethane sealing elements
EN 682:2002 as implemented nationally by MSA EN 682:2002
Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying
gas and hydrocarbon fluids
EN 771-3:2003/A1:2005 as implemented nationally by MSA EN 771-
3:2003/A1:2005
Specification for masonry units – Part 1: Clay masonry units
EN 771-2:2003/A1:2005 as implemented nationally by MSA EN 771-
2:2003/A1:2005
Specification for masonry units – part 2: Calcium silicate masonry units
EN 771-3:2003/A1:2005 as implemented nationally by MSA EN 771-
3:2003/A1:2005
Specification for masonry units – Part 3: Aggregate concrete masonry units – Part 3
Aggregate concrete masonry units (Dense and light-weight aggregates)
EN 771-4:2003/A1:2005 as implemented nationally by MSA EN 771-
4:2003/A1:2005
Specification for masonry units – Part 4: Autoclaved aerated concrete masonry units
EN 771-5:2003/A1:2005 as implemented nationally by MSA EN 771-
5:2003/A1:2005
Specification for masonry units – Part 5: Manufactured stone masonry units
EN 845-1:2003 as implemented nationally by MSA EN 845-1:2003
Specification for ancillary components for masonry - Part 1: Ties, tension straps,
hangers and brackets
EN 845-2:2003 as implemented nationally by MSA EN 845-2:2003
Specification for ancillary components for masonry - Part 2: Lintels
EN 845-3:2003 as implemented nationally by MSA EN 845-3:2003
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement
of steel meshwork
EN 934-2:2001/A1:2004 as implemented nationally by MSA EN 934-
2:2001/A1:2004
Admixtures for concrete, mortar and grout-Part 2: Concrete admixtures-Definitions,
requirements, conformity, marking and labelling
EN 934-3:2003/AC:2005 as implemented nationally by MSA EN 934-
3:2003/AC:2005
Admixtures for conrete, mortar and grout – Part 3: Admixtures for masonry mortar –
Definitions, requirements, conformity, marking and labelling
EN 934-4:2001 as implemented nationally by MSA EN 934-4:2001
Admixtures for concrete, mortar and grout-Part 4: Admixtures for grout for
prestressing tendons-Definitions, requirements, conformity, marking and labelling
EN 998-1:2003 as implemented nationally by MSA EN 998-1:2003
Specification for mortar for masonry - Part 1: Rendering and plastering mortar
EN 998-2:2003 as implemented nationally by MSA EN 998-2:2003
Specification for mortar for masonry - Part 2: Masonry mortar
EN 1123-1:1999/A1:2004 as implemented nationally by MSA EN 1123-
1:1999/A1:2004
Pipes and fitting of longitudinally welded hot-dip galvanized steel pipes with spigot
and socket for waste water systems – Part 1: Requirements, testing, quality control
EN 1124-1:1999/A1:2004 as implemented nationally by MSA EN 1124-
1:1999/A1:2004
Pipes and fitting of longitudinally welded stainless steel pipes with spigot and socket
for waste water systems – Part 1: Requirements, testing, quality control
EN 1125:1997/A1:2001/AC:2002 as implemented nationally by MSA EN
1125:2000/A1:2002/AC:2002
Building hardware-Panic exit devices operated by a horizontal bar-Requirements and
test methods
EN 1154:1996/A1:2002 as implemented nationally by MSA EN
1154:1996/A1:2002
Building hardware - Controlled door closing devices - Requirements and test methods
EN 1155:1997/A1:2002 as implemented nationally by MSA EN
1155:1997/A1:2002
Building hardware - Electrically powered hold-open devices for swing doors -
Requirements and test methods
EN 1158:1997/A1:2002/AC:2006 as implemented nationally by MSA EN
1158:1997/A1:2002/AC:2006
Building hardware - Door coordinator devices - Requirements and test methods
EN 1337-4:2004 as implemented nationally by MSA EN 1337-4:2004
Structural bearings – Part 4: Roller bearings
EN 1337-6:2004 as implemented nationally by MSA EN 1337-6:2004
Structural bearings – Part 6: Rocker bearings
EN 1337-7:2004 as implemented nationally by MSA EN 1337-7:2004
Structural bearings-Part 7: Spherical and cylindrical PTFE bearings
EN 1338:2003 as implemented nationally by MSA EN 1338:2003
Concrete paving blocks - Requirements and test methods
EN 1339:2003 as implemented nationally by MSA EN 1339:2003
Concrete paving flags – Requirements and test methods
EN 1340:2003 as implemented nationally by MSA EN 1340:2003
Concrete kerb units – Requirements and test methods
EN 1341:2001 as implemented nationally by MSA EN 1341:2002
Slabs of natural stone for external paving-Requirements and test methods
EN 1342:2001 as implemented nationally by MSA EN 1342:2002
Setts of natural stone for external paving-Requirements and test methods
EN 1343:2001 as implemented nationally by MSA EN 1343:2002
Kerbs of natural stone for external paving-Requirements and test methods
EN 1344:2002 as implemented nationally by MSA EN 1344:2002
Clay pavers - Requirements and test methods
EN 1423:1997/A1:2003 as implemented nationally by MSA EN
1423:1997/A1:2003
Road marking materials – Drop on materials – Glass beads, antiskid aggregates and
mixtures of the two
EN 1433:2002/A1:2005 as implemented nationally by MSA EN
1433:2002/A1:2005
Drainage channels for vehicular and pedestrian areas – Classification, design and
testing requirements, marking and evaluation of conformity
EN 1457:1999/AC:1999/A1:2002 as implemented nationally by MSA EN
1457:1999/AC:1999/A1:2002
Chimneys – Clay/ceramic flue liners – Requirements and test methods
EN 1520:2002 as implemented nationally by MSA EN 1520:2003
Prefabricated reinforced components of lightweight aggregate concrete with open
structure
EN 1856-1:2003 as implemented nationally by MSA EN 1856-1:2003
Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1857:2003 as implemented nationally by MSA EN 1857:2003
Chimneys – Components – Concrete flue liners
EN 1858:2003 as implemented nationally by MSA EN 1858:2003
Chimneys – Components – Concrete flue blocks
EN 1916:2002 as implemented nationally by MSA EN 1916:2002
Concrete pipes and fittings, unreinforced, steel fibre and reinforced
EN 1917:2002 as implemented nationally by MSA EN 1917:2002
Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
EN 1935:2002 as implemented nationally by MSA EN 1935:2002
Building hardware-Single-axis hinges-Requirements and test methods
EN 12004:2001/A1:2002/AC:2002 as implemented nationally by MSA EN
12004:2001/A1:2002/AC:2002
Adhesives for tiles - Definitions and specifications
EN 12050-1:2001 as implemented nationally by MSA EN 12050-1:2001
Wastewater lifting plants for buildings and sites-Principles of construction and
testing-Part 1: Lifting plants for wastewater containing faecal matter
EN 12050-2:2000 as implemented nationally by MSA EN 12050-2:2001
Wastewater lifting plants for buildings and sites-Principles of construction and
testing-Part 2: Lifting plants for faecal-free wastewater
EN 12050-3:2000 as implemented nationally by MSA EN 12050-3:2001
Wastewater lifting plants for buildings and sites-Principles of construction and
testing-Part 3: Lifting plants for wastewater containing faecal matter for limited
applications
EN 12050-4:2000 as implemented nationally by MSA EN 12050-4:2000
Wastewater lifting plants for buildings and sites-Principles of construction and
testing-Part 4: Non-return valves for faecal-free wastewater and wastewater
containing faecal matter
EN 12094-1:2003 as implemented nationally by MSA EN 12094-1:2003
Fixed firefighting systems – Components for gas extinguishing systems – Part 1
Requirements and test methods for electrical automatic control and delay devices
EN 12094-2:2003 as implemented nationally by MSA EN 12094-2:2003
Fixed firefighting systems – Components for gas extinguishing systems – Part 2
Requirements and test methods for non-electrical automatic control and delay devices
EN 12094-3:2003 as implemented nationally by MSA EN 12094-3:2003
Fixed firefighting systems – Components for gas extinguishing systems – Part 3
Requirements and test methods for manual triggering and stop devices
EN 12094-5:2000 as implemented nationally by MSA EN 12094-5:2001
Fixed firefighting systems - Componenets for gas extinguishing systems - Part 5
Requirements and test methods for high and low pressure selector valves and their
actuators for CO2 systems
EN 12094-6:2000 as implemented nationally by MSA EN 12094-6:2001
Fixed firefighting systems - Components for gas extinguishing systems - Part 6
Requirements and test methods for non-electrical disable devices for CO2 systems
EN 12094-7:2000/A1:2005 as implemented nationally by MSA EN 12094-
7:2001/A1:2005
Fixed firefighting systems - Components for gas extinguishing systems - Part 7
Requirements and test methods for nozzles for CO2 systems
EN 12094-9:2003 as implemented nationally by MSA EN 12094-9:2003
Fixed firefighting systems – Components for gas extinguishing systems – Part 9
Requirements and test methods for special fire detectors
EN 12094-10:2003 as implemented nationally by MSA EN 12094-10:2003
Fixed firefighting systems – Componenets for gas extinguishing systems – Part 10
Requirements and test methods for pressure gauges and pressure switches
EN 12094-11:2003 as implemented nationally by MSA EN 12094-11:2003
Fixed firefighting systems – Components for gas extinguishing systems – Part 11
Requirements and test methods for mechanical weighing devices
EN 12094-12:2003 as implemented nationally by MSA EN 12094-12:2003
Fixed firefighting systems – Components for gas extinguishing systems – Part 12
Requirements and test methods for pneumatic alarm devices
EN 12094-13:2001 as implemented nationally by MSA EN 12094-13:2001
Fixed firefighting systems - Components for gas extinguishing systems - Part 13
Requirements and test methods for check valves and non-return valves
EN 12101-3:2002 as implemented nationally by MSA EN 12101-3:2002
Smoke and heat control systems - Part 3: Specification for powered smoke and heat
exhaust ventilators
EN 12209:2003/AC:2005 as implemented nationally by MSA EN
12209:2003/AC:2005
Building hardware – Locks and latches – Mechanically operated locks, latches and
locking plates – Requirements and test methods
EN 12259-1:1999 + A1:2001/A2:2004 as implemented nationally by MSA EN
12259-1:1999 + A1:2001/A2:2004
Fixed firefighting systems – Components for sprinkler and water spray systems – Part
1: Sprinklers
EN 12259-2:1999/AC:2002 as implemented nationally by MSA EN 12259-
2:1999/AC:2002
Fixed firefighting systems – Components for sprinkler and water spray systems – Part
2: Wet alarm valve assemblies
EN 12259-4:2000/A1:2001 as implemented nationally by MSA EN 12259-
4:2000/A1:2001
Fixed firefighting systems - Components for sprinkler and water spray systems - Part
4: Water motor alarms
EN 12259-5:2002 as implemented nationally by MSA EN 12259-5:2002
Fixed firefighting systems – Components for sprinkler and water spray systems – Part
5: Water flow detectors
EN 12380:2002 as implemented nationally by MSA EN 12380:2003
Air admittance valves for drainage systems - Requirements, tests methods and
evaluation of conformity
EN 12416-1:2001/A1:2004 as implemented nationally by MSA EN 12416-
1:2001/A1:2004
Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods
for components
EN 12416-2:2001 as implemented nationally by MSA EN 12416-2:2001
Fixed firefighting systems - Powder systems - Part 2: Design, construction and
maintenance
EN 12446:2003 as implemented nationally by MSA EN 12446:2003
Chimneys - Components - Concrete outer wall elements
EN 12566-1:2000/A1:2003 as implemented nationally by MSA EN 12566-
1:2000/A1:2003
Small wastewater treatment systems for up to 50 PT – Part 1: Prefabricated septic
tanks
EN 12620:2002 as implemented nationally by MSA EN 12620:2002
Aggregates for concrete
EN 12676-1:2000/A1:2003 as implemented nationally by MSA EN 12676-
1:2000/A1:2003
Anti-glare systems for roads – Part 1: Performance and characteristics
EN 12809:2001/AC:2003 as implemented nationally by MSA EN
12809:2001/AC:2003
Residential independent boilers fired by solid fuel – Nominal heat output up to 50 kW
– Requirements and test methods
EN 12815:2001/AC:2003 as implemented nationally by MSA EN
12815:2001/AC:2003
Residential cookers fired by solid fuel – Requirements and test methods
EN 12839:2001 as implemented nationally by MSA EN 12839:2001
Precast concrete products - Elements for fences
EN 12859:2001/A1:2004 as implemented nationally by MSA EN
12859:2001/A1:2004
Gypsum blocks - Definitions, requirements and test methods
EN 12860:2001 as implemented nationally by MSA EN 12860:2001
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test
methods
EN 13043:2002/AC:2004 as implemented nationally by MSA EN
13043:2002/AC:2004
Aggregates for bituminous mixtures and surface treatments for roads, airfields and
othertrafficked areas
EN 13055-1:2002 as implemented nationally by MSA EN 13055-1:2002
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and
grout
EN 13055-2:2004 as implemented nationally by MSA EN 13055-2:2004
Lightweight aggregates – Part 2: Lightweight aggregates for bituminous mixtures and
surface treatments and for unbound and bound applications
EN 13101:2002 as implemented nationally by MSA EN 13101:2002
Steps for underground man entry chambers - Requirements, marking, testing and
evaluation of conformity
EN 13139:2002 as implemented nationally by MSA EN 13139:2002
Aggregates for mortar
EN 13160-1:2003 as implemented nationally by MSA EN 13160-1:2003
Leak detection systems - Part 1: General principles
EN 13162:2001/AC:2005 as implemented nationally by MSA EN
13162:2001/AC:2005
Thermal insulation products for buildings - Factory made mineral wool (MW)
products - Specification
EN 13163:2001/AC:2005 as implemented nationally by MSA EN
13163:2001/AC:2005
Thermal insulation products for buildings - Factory made products of expanded
polystyrene (EPS) - Specification
EN 13164:2001/A1:2004/AC:2005 as implemented nationally by MSA EN
13164:2001/A1:2004/AC:2005
Thermal insulation products for buildings - Factory made products of extruded
polystyrene foam (XPS) – Specification
EN 13165:2001/A1:2004/AC:2005 as implemented nationally by MSA EN
13165:2001/A1:2004/AC:2005
Thermal insulation products for buildings - Factory made rigid polyurethane foam
(PUR) products - Specification
EN 13166:2001/A1:2004/AC:2005 as implemented nationally by MSA EN
13166:2001/A1:2004/AC:2005
Thermal insulation products for buildings - Factory made products pf phenolic foam
(PF) - Specification
EN 13167:2001/A1:2004/AC:2005 as implemented nationally by MSA EN
13167:2001/A1:2004/AC:2005
Thermal insulation products for buildings - Factory made products pf phenolic foam
(PF) - Specification
EN 13168:2001/A1:2004/AC:2005 as implemented nationally by MSA EN
13168:2001/A1:2004/AC:2005
Thermal insulation products for buildings - Factory made wood wool (WW) products
- Specification
EN 13169:2001/A1:2004/AC:2005 as implemented nationally by MSA EN
13169:2001/A1:2004/AC:2005
Thermal insulation products for buildings - Factory made products of expanded perlite
(EPB) - Specification
EN 13170:2001/AC:2005 as implemented nationally by MSA EN
13170:2001/AC:2005
Thermal insulation products for buildings-Factory made products of expanded cork
(ICB)-Specification
EN 13171:2001/A1:2004/AC:2005 as implemented nationally by MSA EN
13171:2001/A1:2004/AC:2005
Thermal insulation products for buildings - Factory made wood fibre (WF) products –
Specification
EN 13224:2004/AC:2005 as implemented nationally by MSA EN
13224:2004/AC:2005
Precast concrete products – Ribbed floor elements
EN 13229:2001/AC:2003 as implemented nationally by MSA EN
13229:2001/AC:2003
Inset appliances including open fires fired by solid fuels – Requirements and test
methods
EN 13240:2001/AC:2003 as implemented nationally by MSA EN
13240:2001/AC:2003
Room heaters fired by solid fuel – Requirement and test methods
EN 13241-1:2003 as implemented nationally by MSA EN 13241-1:2003
Industrial, commercial and garage doors and gates - Product standard - Part 1
Products without fire resistance or smoke control characteristics
EN 13242:2002 as implemented nationally by MSA EN 13242:2003
Aggregates for unbound and hydraulically bound materials for use in civil engineering
work and road construction
EN 13249:2000 as implemented nationally by MSA EN 13249:2001
Geotextiles and geotextile-related products -Characteristics required for use in the
construction of roads and other trafficked areas (excluding railways and asphalt
inclusion)
EN 13250:2000 as implemented nationally by MSA EN 13250:2001
Required characteristics for geotextiles and geotextile-related products used in the
construction of railways
EN 13251:2000 as implemented nationally by MSA EN 13251:2001
Geotextiles and geotextile-related products-Characteristics required for use in
earthworks, foundations and retaining structures
EN 13252:2000 as implemented nationally by MSA EN 13252:2001
Geotextiles and geotextile-related products-Characteristics required for use in
drainage systems
EN 13253:2000 as implemented nationally by MSA EN 13253:2001
Geotextiles and geotextile-related products - Characteristics required for use in
erosion control works (coastal protection, bank revetments)
EN 13254:2000/AC:2003 as implemented nationally by MSA EN
13254:2001/AC:2003
Geotextiles and geotextile related products-Characteristics required for use in the
construction of reservoirs and dams
EN 13255:2000/AC:2003 as implemented nationally by MSA EN
13255:2001/AC:2003
Geotextiles and geotextile-related products-Characteristics required for use in the
construction of canals’
EN 13256:2000/AC:2003 as implemented nationally by MSA EN
13256:2001/AC:2003
Geotextiles and geotextile-related products-Characteristics required for use in the
construction of tunnels and underground structures
EN 13257:2000/AC:2003 as implemented nationally by MSA EN
13257:2001/AC:2003
Geotextiles and geotextile-related products - Characteristics required for use in solid
waste disposals
EN 13265:2000/AC:2003 as implemented nationally by MSA EN
13265:2001/AC:2003
Geotextiles and geotextile-related products - Characteristics required for use in liquid
waste containment projects
EN 13310:2003 as implemented nationally by MSA EN 13310:2003
Kitchen sinks - Functional requirements and test methods
EN 13383-1:2002 as implemented nationally by MSA EN 13383-1:2002
Armourstone - Part 1: Specification
EN 13450:2002 as implemented nationally by MSA EN 13450:2003
Aggregates for railway ballast
EN 13502:2002 as implemented nationally by MSA EN 13502:2002
Chimneys - Requirements and test methods for clay/ceramic flue terminals
EN 13561:2004 as implemented nationally by MSA EN 13561:2004
External blinds – Performance requirements including safety
EN 13564-1:2002 as implemented nationally by MSA EN 13564-1:2002
Anti-flooding devices for buildings - Part 1: Requirements
EN 13616:2004/AC:2006 as implemented nationally by MSA EN
13616:2004/AC:2006
Overfill prevention devices for static tanks for liquid petroleum fuels
EN 13659:2004 as implemented nationally by MSA EN 13659:2004
Shutters – Performance requirements including safety
EN 13748-1:2004/AC:2005 as implemented nationally by MSA EN 13748-
1:2004/AC:2005
Terrazzo tiles – Part 1: Terrazzo tiles for internal use
EN 13748-2:2004 as implemented nationally by MSA EN 13748-2:2004
Screed materials and floor screeds – Screed material – Properties and requirements
EN 13830:2003 as implemented nationally by MSA EN 13830:2003
Curtain walling – Product standard
EN 13813:2002 as implemented nationally by MSA EN 13813:2002
Screed material and floor screeds - Screed material - Properties and requirements
EN 13830:2003 as implemented nationally by MSA EN 13830:2003
Curtain walling – Product standard
EN 13986:2004 as implemented nationally by MSA EN 13986:2004
Wood-based panels for use in construction - Characteristics, evaluation of conformity
and marking
EN 14016-1:2004 as implemented nationally by MSA EN 14016-1:2004
Binders for magnesite screeds – Caustic magnesia and magnesium chloride – Part 1
Definitions, requirements
EN 14037-1:2003 as implemented nationally by MSA EN 14037-1:2003
Ceiling mounted radiant panels supplied with water at temperature below 120 °C -
Part 1: Technical specifications and requirements
EN 14041:2004/AC:2005 as implemented nationally by MSA EN
14041:2004/AC:2005
Resilient, textile and laminate floor coverings – Essential characteristics
EN 14063-1:2004 as implemented nationally by MSA EN 14063-1:2004
Thermal insulation materials and products – In-situ formed expanded clay lightweight
aggregate products (LWA) – Part 1: Specification for the loose-fill products before
installation
EN 14216:2004 as implemented nationally by MSA EN 14216:2004
Cement – Composition, specifications and conformity criteria for very low heat
special cements
EN 14316-1:2004 as implemented nationally by MSA EN 14316-1:2004
Thermal insulation products for buildings – In-situ thermal insulation formed foam
expanded perlite (EP) products – Part 1: Specification for bonded and loose-fill
products before installation
EN 14317-1:2004 as implemented nationally by MSA EN 14317-1:2004
Thermal insulation products for buildings – In-situ thermal insulation formed from
exfoliated vermiculite (EV) products – Part 1: Specification for bonded and loose-fill
products before installation
EN 14396:2004 as implemented nationally by MSA EN 14396:2004
Fixed ladders for manholes
EN 14411:2003 as implemented nationally by MSA EN 14411:2003
Ceramic tiles – Definitions, classification, characteristics and marking (ISO
13006:1998, modified)
EN 14449:2005/AC:2005 as implemented nationally by MSA EN
14449:2005/AC:2005
Glass in building – Laminated glass and laminated safety glass – Evaluation of
conformity/Product standard
Mitbug[ fl-Istamperija tal-Gvern — Printed at the Government Printing Press