MT
Laboratory) Regulations, 2000
Table of Provisions (12)
Statutory Text (12 Articles)
L.N. 63 of 2000
FEES ORDINANCE
(CAP. 35)
Fees (Testing of Material at Ta' Kordin Quality Control
Laboratory) Regulations, 2000
IN exercise of the powers conferred by section 2 of the Fees
Ordinance, the Minister for the EnVironment, with the concurrence of
the Minister of Finance, has made the following regu1ations:-
(1) The title of these regulations is the Fees (Testing of
Materials at Ta' Kordin Quality Control Laboratory) Regulations, 2000.
(2) These regulations shall be deemed to have come into
force on the 25th October, 1999.
(Regulation 2)
RATE FOR TESTING AT TA' KORDIN QUALITY CONTROL
LABORATORY
First Column
Second Column
Third Column
Lmc
Lmc
Steel Rods
Tensile testing incorporating yield strength,
ultimate strength, percentage elongation,
weight / unit length per rod.
8. 00
There shall be payable to the Director General, Works Division,
in respect of the services specified in the First Column of the Schedule
to these regulations, the fees specified in the Second Column thereof
for the period from the 25th October, 1999 to the 31st March, 2000,
and thereafter the fees specified in the Third Column thereof for the
period commencing on the 1st April, 2000.
The Fees (Testing of Goods at Standards Laboratory)
Regulations, 1990 are hereby reyoked.
35
Steel Wire mesh
9.20
50
Tiles
Cross breaking strength, water absorption
(face and whole tile) dimensions and appearance
19. 00
00
Set of 6 Tiles
Cement
Mortar compressive set of 9 cubes
9.00
11.50
8.00
Setting time (initial and final)
10.35
5.00
6.33
Soundness
Sand Replacement
20.00
Including dry density and optimum moisture content
30
12.00
13.80
Plastic Index
Kerb
5.00
6.90
Transverse strength
5.00
11.50
Water absorption
inc.
3.45
Dimensions
Paving Blocks
10.00
23.00
Compressive strength and dimensions (set of 16)
Hollow Concrete Blocks
Compressive strength inc. dimensions (set of 10)
25.00
32. 20
40. 00
30
Ditto with capping method (set of 10)
Concrete
1.00
1.44
Compressive strength (cubes supplied by client)
15.00
28.75
Sampling, curing and testing (set of 6 cubes)
Aggregate
5.00
23.00
Crushing value
5.00
9.20
Impact value
5.00
17.25
10% fine
6.00
Sieve Analysis
9.20
8.00
10.35
Relative density - dry
12.00
17.25
Relative density - saturated surface dry
B 47R
Second Column
Third Column
First Column
Lmc
Lmc
9.20
6.00
Moisture content
Tests on Bitumen
},
Penetration
20.00
28.75
Softening Point
Tests on Bitumen Emulsions
Bitumen Emulsions type (i.e. Anionic or Cationic)
}
Bitumen / Water Content
30.00
50
Viscosity
Coating ability and water resistance
Hot or Cold Asphalts
Marshall test (compression test)
}
Binder content
Sieve analysis
55.00
00
Abrasion test or aggregates pro-mixing into
Hot Asphalt (Los Angeles)
Core cut replacement and density
10.00
17.25
Extraction test
20.00
25.30
Sieve analysis
6.00
9.20
Wet Sieving (Sand) analysis
Los Angeles Test and analysis of Wet Sieving (Sand)
17.25
32.00
Compaction Degree
4.60
10.00
Max Theoretical Specific Gravity
2.30
5.50
Voids Content
22.00
25.00
C.B.R. Procter Test and (in Laboratory)
40.25
50.00
Bonkelman Bean (per hour)
6.90
10.00
Plate Bearing (per hour)
11.50
13.00
Clegg Hammer (every spot of 8 reading)
2.50
5.00
Skid Resistance Test
6.50
8.50
Schmidt Hammer (Concrete Test values result)
(every 5 readings)
4.50
6.50
Ceramic Tiles
Transverse strength, water absorbent,chemical
resistance, dimensions and scratch
28.75
32.00
015% VAT included in above rates