S.I. No. 327/2012 - European Communities Environmental Objectives (Surface Waters) (Amendment) Regulations 2012.
Table of Provisions (10)
Statutory Text (10 Articles)
0. 0015
not applicable
(1) The calculation of the arithmetic mean and the analytical method used must be in accordance with the technical specifications for chemical monitoring and quality of analytical results to be adopted in accordance with Directive 2000/60/EC of the European Parliament and of the Council, including how to apply an EQS where there is no appropriate analytical method meeting the minimum performance criteria.
(2) This parameter is the Environmental Quality Standard expressed as an annual average value (AA-EQS). Unless otherwise specified, it applies to the total concentration of all isomers.
(3) Inland surface waters encompass rivers and lakes and related artificial or heavily modified water bodies.
(4) This parameter is the Environmental Quality Standard expressed as a maximum allowable concentration (MAC-EQS). Where the MAC-EQS are marked as “not applicable”, the AA-EQS values are considered protective against short-term pollution peaks in continuous discharges since they are significantly lower than the values derived on the basis of acute toxicity.
(5) For the group of priority substances covered by brominated diphenylethers listed in Decision 2455/2001/EC, an EQS is established only for congener numbers 28, 47, 99, 100, 153 and 154.
(6) For Cadmium and its compounds the EQS values vary dependent upon the hardness of the water as specified in five class categories (Class 1: <40 mg CaCO
3
/l, Class 2: 40 to <50 mg CaCO
3
/l, Class 3: 50 to <100 mg CaCO
3
/l, Class 4: 100 to <200 mg CaCO
3
/l and Class5:≥200 mg CaCO
3
/l).
(7) For the group of substances polyaromatic hydrocarbons (PAH) each individual EQS is applicable, i.e. the EQS for Benzo(
a
) pyrene, the EQS for the sum of Benzo(
b
) fluoranthene and Benzo(
k
) fluoranthene and the EQS for the sum of Benzo(g,h,i) perylene and Indeno(1,2,3-cd) pyrene must be met.
(8) Each EQS shall be for prey tissue (wet weight). The EPA shall choose the most appropriate indicator from among fish, molluscs, crustaceans and other biota. The EPA shall determine, for substances (6), (7) and (9), the frequency of monitoring in biota. However, monitoring shall take place at least once every year, unless technical knowledge and expert judgment justify another interval.
GIVEN under my Official Seal,
31 August 2012.
PHIL HOGAN,
Minister for the Environment, Community and Local Government.
EXPLANATORY NOTE
(This note is not part of the Instrument and does not purport to be a legal interpretation)
These Regulations amend the European Communities Environmental Objectives (Surface Waters) Regulations, 2009 (
S.I. No. 272 of 2009
).
The purpose of these Regulations is to
Clarify the role of public authorities in the protection of surface waters;
Include standards for the priority hazardous substances mercury, hexachlorobutadiene and hexachlorobenzene in biota found in surface water bodies;
Set limits for the priority substance Trifluralin in surface water bodies;
Amend the date by which the first inventory of priority substances is established, to align with the review of pressures scheduled for December 2013 in accordance with Article 7 of the 2009 European Communities (Water Policy) Regulations (
S.I. No. 722 of 2003
);
Amend the date, in turn, by which pollution reduction programmes for surface water bodies must be prepared and
Revoke the European Communities (Quality of Water intended for Human Consumption) Regulations 1989 (
S.I. No. 294 of 1989
).
1 O.J. No. L64/52, 4 March 2006
2 O.J. No. L327/1, 22 December 2000
3 O.J. No. L348/84, 24 December 2008
1. These Regulations may be cited as the European Communities Environmental Objectives (Surface Waters) (Amendment) Regulations 2012.
2. 5
not applicable
not applicable
(23)
Trifluralin
1582-09-8
3. The 2009 Regulations are amended as follows—
(1) by replacing the opening paragraph of Regulation 4 with the following
“A public authority shall, in so far as its functions allow, comply with the requirements of these Regulations and take all reasonable steps including, where necessary, the implementation of programmes of measures to:” and
(2) by the deletion of the phrase “in so far as its functions allow” in Regulation 4(
a
).
4. Regulation 56 of the 2009 Regulations is amended by the substitution of the words “22 December 2013” for the words “22 June 2011”.
5. Regulation 59 of the 2009 Regulations is amended by the substitution of the words “22 June 2014” for the words “22 June 2012”.
6. Regulation 70 of the 2009 Regulations is replaced by
“The Local Government (Water Pollution) Act 1977 (Water Quality Standards for Phosphorus) Regulations 1998 (
S.I. No. 258 of 1998
), the Water Quality (Dangerous Substances) Regulations 2001 (
S.I. No. 12 of 2001
) and the European Communities (Quality of Water Intended for Human Consumption) Regulations 1989 (
S.I. No. 294 of 1989
) are hereby revoked.”
7. Table 11 and associated footnotes of Schedule 6 to the 2009 Regulations are deleted and replaced by the following
Table 11
The environmental quality standards for priority substances and certain other pollutants to apply for the purpose of assigning chemical status
With the exception of cadmium, lead, mercury and nickel (hereinafter “metals”) the EQS values in tables 11 and 12 are expressed as total concentrations in the whole water sample. In the case of metals the EQS refers to the dissolved concentration, i.e. the dissolved fraction of a water sample obtained by filtration through a 0.45 µm filter or any equivalent pre-treatment.
Priority Substances
AA: annual average(1)
MAC: maximum allowable concentration
Unit: [µg/l]
(1)
(2)
(3)
(4)
(5)
(6)
(7)
No.
Name of substance
Chemical Abstracts Service number
AA-EQS
(2)
Inland surface waters
(3)
AA-EQS
(2)
Other surface waters
MAC-EQS
(4)
Inland surface waters
(3)
MAC-EQS
(4)
Other surface waters
(1)
Alachlor
15972-60-8
0.3
0.3
0.7
0.7
(2)
Atrazine
1912-24-9
0.6
0.6
2.0
2.0
(3)
Benzene
71-43-2
10
8
50
50
(4)
Carbon-tetrachloride
(5)
56-23-5
12
12
not applicable
not applicable
(5)
Chlorfenvinphos
470-90-6
0.1
0.1
0.3
0.3
(6)
Chlorpyrifos (Chlorpyrifos-ethyl)
2921-88-2
0.03
0.03
0.1
0.1
(7a)
Cyclodiene pesticides
Aldrin
(5)
Dieldrin
(5)
Endrin
(5)
Isodrin
(5)
309-00-2
60-57-1
72-20-8
465-73-6
Σ=0.01
Σ=0.005
not applicable
not applicable
(7b)
DDT total
(5)
,
(6)
not applicable
0.025
0.025
not applicable
not applicable
para-para-DDT(5)
50-29-3
0.01
0.01
not applicable
not applicable
(8)
1,2-Dichloroethane
107-06-2
10
10
not applicable
not applicable
(9)
Dichloromethane
75-09-2
20
20
not applicable
not applicable
(10)
Di(2-ethylhexyl)-phthalate (DEHP)
117-81-7
1.3
1.3
not applicable
not applicable
(11)
Diuron
330-54-1
0.2
0.2
1.8
1.8
(12)
Fluoranthene
206-44-0
0.1
0.1
1
1
(13)
Isoproturon
34123-59-6
0.3
0.3
1.0
1.0
(14)
Lead and its compounds
7439-92-1
7.2
7.2
not applicable
not applicable
(15)
Naphthalene
91-20-3
2.4
1.2
not applicable
not applicable
(16)
Nickel and its compounds
7440-02-0
20
20
not applicable
not applicable
(17)
Octylphenol((4-(1,1’,3,3’-tetramethylbutyl)-phenol))
140-66-9
0.1
0.01
not applicable
not applicable
(18)
Pentachloro-phenol
87-86-5
8. Table 12 and associated footnotes of Schedule 6 to the 2009 Regulations are deleted and replaced by the following
Table 12
The environmental quality standards for priority hazardous substances to apply for the purpose of assigning chemical status
Priority Hazardous Substances
AA: annual average(1)
MAC: maximum allowable concentration
Unit: [µg/l]
[µg/kg wet weight] for column (8)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
No.
Name of substance
Chemical Abstracts Service number
AA-EQS
(2)
Inland surface waters
(3)
AA-EQS
(2)
Other surface waters
MAC-EQS
(4)
Inland surface waters
(3)
MAC-EQS
(4)
Other surface waters
EQS Biota
(8)
(1)
Anthracene
120-12-7
0.1
0.1
0.4
0.4
not applicable
(2)
Brominated diphenylether
(5)
32534-81-9
0.0005
0.0002
not applicable
not applicable
not applicable
(3)
Cadmium and its compounds
(depending on water hardness classes)
(6)
7440-43-9
≤ 0.08 (Class 1)
0.08 (Class 2)
0.09 (Class 3)
0.15 (Class 4)
0.25 (Class 5)
0.2
≤ 0.45 (Class 1)
0.45 (Class 2)
0.6 (Class 3)
0.9 (Class 4)
1.5 (Class 5)
≤ 0.45 (Class 1)
0.45 (Class 2)
0.6 (Class 3)
0.9 (Class 4)
1.5 (Class 5)
not applicable
(4)
C10-13 Chloroalkanes
85535-84-8
0.4
0.4
1.4
1.4
not applicable
(5)
Endosulfan
115-29-7
0.005
0.0005
0.01
0.004
not applicable
(6)
Hexachloro-benzene
118-74-1
0.01
0.01
0.05
0.05
10
(7)
Hexachloro-butadiene
87-68-3
0.1
0.1
0.6
0.6
55
(8)
Hexachloro-cyclohexane
608-73-1
0.02
0.002
0.04
0.02
not applicable
(9)
Mercury and its compounds
7439-97-6
0.05
0.05
0.07
0.07
20
(10)
Nonylphenol (4-Nonylphenol)
104-40-5
0.3
0.3
2.0
2.0
not applicable
(11)
Pentachloro-benzene
608-93-5
Notice of the making of this Statutory Instrument was published in
“Iris Oifigiúil” of
4
th September
, 2012.
I, PHIL HOGAN, Minister for the Environment, Community and Local Government, in exercise of the powers conferred on me by
section 3
of the
European Communities Act 1972
(No. 27 of 1972) and for the purpose of giving further effect to Directive 2006/11/EC
1
of the European Parliament and of the Council of 15 February 2006 on pollution caused by certain dangerous substances discharged into the aquatic environment of the Community, Directive 2000/60/EC
2
of the European Parliament and of the Council of 23 October 2000 establishing a framework for Community action in the field of water policy, and Directive 2008/105/EC
3
of the European Parliament and of the Council of 16 December 2008 on environmental quality standards in the field of water policy, amending and subsequently repealing Directives 82/176/EEC, 83/513/EEC, 84/156/EEC, 84/491/EEC, 86/280/EEC and amending Directive 2000/60/EC of the European Parliament and of the Council hereby make the following Regulations