S.I. No. 382/1998 - Waste Management (Packaging) (Amendment) Regulations, 1998
Statutory Text (4 Articles)
1. Requirements specific to the manufacturing and composition of packaging
Packaging shall be so manufactured that the packaging volume and weight be limited to the minimum adequate amount to maintain the necessary level of safety, hygiene and acceptance for the packed product and for the consumer.
Packaging shall be designed, produced and commercialised in such a way as to permit its reuse or recovery, including recycling, and to minimize its impact on the environment when packaging waste or residues from packaging waste management operations are disposed of.
Packaging shall be so manufactured that the presence of noxious and other hazardous substances and materials as constituents of the packaging material or of any of the packaging components is minimized with regard to their presence in emissions, ash or leachate when packaging or residues from management operations or packaging waste are incinerated or landfilled.
2. Requirements specific to the reusable nature of packaging
The following requirements must be simultaneously satisfied
— the physical properties and characteristics of the packaging shall enable number of trips or rotations in normally predictable conditions of use,
— possibility of processing the used packaging in order to meet health and safety requirements for the workforce,
— fulfil the requirements specific to recoverable packaging when the packaging is no longer used and thus becomes waste.
3. Requirements specific to the recoverable nature of packaging
(a)
Packaging recoverable in the form of material recycling
Packaging must be manufactured in such a way as to enable the recycling of a certain percentage by weight of the materials used into the manufacture of marketable products, in compliance with current standards in the Community. The establishment of this percentage may vary, depending on the type of material of which the packaging is composed.
(b)
Packaging recoverable in the form of energy recovery
Packaging waste processed for the purpose of energy recovery shall have a minimum inferior calorific value to allow optimization of energy recovery.
(c)
Packaging recoverable in the form of composting
Packaging waste processed for the purpose of composting shall be of such a biodegradable nature that is should not hinder the separate collection and the composting process or activity into which it is introduced.
(d)
Biodegradable packaging
Biodegradable packaging waste shall be of such a nature that it is capable of undergoing physical, chemical, thermal or biological decomposition such that most of the finished compost ultimately decomposes into carbon dioxide, biomass and water.".
Dated this 8th day of October, 1998
Minister of State at the Department of the Environment and Local Government
EXPLANATORY NOTE
These Regulations amend the Waste Management (Packaging) Regulations, 1997 for the purpose of implementing article 9 of European Parliament and Council Directive 94/62/EC of 20 December, 1994 on packaging and packaging waste. The 1997 Regulations, as amended, provide that a person may not supply packaging or packaged products to the Irish market unless the packaging concerned complies with essential requirements as to its nature and composition.
S.I. No. 382 of 1998.
WASTE MANAGEMENT (PACKAGING)(AMENDMENT) REGULATIONS, 1998
In exercise of the powers conferred on the Minister for the Environment and Local Government by
sections 7
,
27
,
28
and
29
of the
Waste Management Act, 1996
(No. 10 of 1996), which said powers are delegated to me by the Environment and Local Government (Delegation of Ministerial Functions)(No. 2) Order, 1997 (
S.I. No. 428 of 1997
), and for the purpose of giving effect to provisions of European Parliament and Council Directive 94/62/EC of 20 December, 1994 on packaging and packaging waste
(1)
, I, Dan Wallace, Minister of State at the Department of the Environment and Local Government, hereby make the following Regulations:—
(1)
O.J. No. L 365/10, 31 December, 1994